1# -*- Mode: Python -*- 2# vim: filetype=python 3# 4 5## 6# = Remote desktop 7## 8 9{ 'include': 'common.json' } 10{ 'include': 'sockets.json' } 11 12## 13# @DisplayProtocol: 14# 15# Display protocols which support changing password options. 16# 17# Since: 7.0 18## 19{ 'enum': 'DisplayProtocol', 20 'data': [ 'vnc', 'spice' ] } 21 22## 23# @SetPasswordAction: 24# 25# An action to take on changing a password on a connection with active 26# clients. 27# 28# @keep: maintain existing clients 29# 30# @fail: fail the command if clients are connected 31# 32# @disconnect: disconnect existing clients 33# 34# Since: 7.0 35## 36{ 'enum': 'SetPasswordAction', 37 'data': [ 'keep', 'fail', 'disconnect' ] } 38 39## 40# @SetPasswordOptions: 41# 42# Options for set_password. 43# 44# @protocol: 45# - 'vnc' to modify the VNC server password 46# - 'spice' to modify the Spice server password 47# 48# @password: the new password 49# 50# @connected: How to handle existing clients when changing the 51# password. If nothing is specified, defaults to 'keep'. For VNC, 52# only 'keep' is currently implemented. 53# 54# Since: 7.0 55## 56{ 'union': 'SetPasswordOptions', 57 'base': { 'protocol': 'DisplayProtocol', 58 'password': 'str', 59 '*connected': 'SetPasswordAction' }, 60 'discriminator': 'protocol', 61 'data': { 'vnc': 'SetPasswordOptionsVnc' } } 62 63## 64# @SetPasswordOptionsVnc: 65# 66# Options for set_password specific to the VNC protocol. 67# 68# @display: The id of the display where the password should be 69# changed. Defaults to the first. 70# 71# Since: 7.0 72## 73{ 'struct': 'SetPasswordOptionsVnc', 74 'data': { '*display': 'str' } } 75 76## 77# @set_password: 78# 79# Set the password of a remote display server. 80# 81# Errors: 82# - If Spice is not enabled, DeviceNotFound 83# 84# Since: 0.14 85# 86# Example: 87# 88# -> { "execute": "set_password", "arguments": { "protocol": "vnc", 89# "password": "secret" } } 90# <- { "return": {} } 91## 92{ 'command': 'set_password', 'boxed': true, 'data': 'SetPasswordOptions' } 93 94## 95# @ExpirePasswordOptions: 96# 97# General options for expire_password. 98# 99# @protocol: 100# - 'vnc' to modify the VNC server expiration 101# - 'spice' to modify the Spice server expiration 102# 103# @time: when to expire the password. 104# 105# - 'now' to expire the password immediately 106# - 'never' to cancel password expiration 107# - '+INT' where INT is the number of seconds from now (integer) 108# - 'INT' where INT is the absolute time in seconds 109# 110# .. note:: Time is relative to the server and currently there is no way 111# to coordinate server time with client time. It is not recommended 112# to use the absolute time version of the @time parameter unless 113# you're sure you are on the same machine as the QEMU instance. 114# 115# Since: 7.0 116## 117{ 'union': 'ExpirePasswordOptions', 118 'base': { 'protocol': 'DisplayProtocol', 119 'time': 'str' }, 120 'discriminator': 'protocol', 121 'data': { 'vnc': 'ExpirePasswordOptionsVnc' } } 122 123## 124# @ExpirePasswordOptionsVnc: 125# 126# Options for expire_password specific to the VNC protocol. 127# 128# @display: The id of the display where the expiration should be 129# changed. Defaults to the first. 130# 131# Since: 7.0 132## 133{ 'struct': 'ExpirePasswordOptionsVnc', 134 'data': { '*display': 'str' } } 135 136## 137# @expire_password: 138# 139# Expire the password of a remote display server. 140# 141# Errors: 142# - If @protocol is 'spice' and Spice is not active, 143# DeviceNotFound 144# 145# Since: 0.14 146# 147# Example: 148# 149# -> { "execute": "expire_password", "arguments": { "protocol": "vnc", 150# "time": "+60" } } 151# <- { "return": {} } 152## 153{ 'command': 'expire_password', 'boxed': true, 'data': 'ExpirePasswordOptions' } 154 155## 156# @ImageFormat: 157# 158# Supported image format types. 159# 160# @png: PNG format 161# 162# @ppm: PPM format 163# 164# Since: 7.1 165## 166{ 'enum': 'ImageFormat', 167 'data': ['ppm', 'png'] } 168 169## 170# @screendump: 171# 172# Capture the contents of a screen and write it to a file. 173# 174# @filename: the path of a new file to store the image 175# 176# @device: ID of the display device that should be dumped. If this 177# parameter is missing, the primary display will be used. (Since 178# 2.12) 179# 180# @head: head to use in case the device supports multiple heads. If 181# this parameter is missing, head #0 will be used. Also note that 182# the head can only be specified in conjunction with the device 183# ID. (Since 2.12) 184# 185# @format: image format for screendump. (default: ppm) (Since 7.1) 186# 187# Since: 0.14 188# 189# Example: 190# 191# -> { "execute": "screendump", 192# "arguments": { "filename": "/tmp/image" } } 193# <- { "return": {} } 194## 195{ 'command': 'screendump', 196 'data': {'filename': 'str', '*device': 'str', '*head': 'int', 197 '*format': 'ImageFormat'}, 198 'coroutine': true, 199 'if': 'CONFIG_PIXMAN' } 200 201## 202# == Spice 203## 204 205## 206# @SpiceBasicInfo: 207# 208# The basic information for SPICE network connection 209# 210# @host: IP address 211# 212# @port: port number 213# 214# @family: address family 215# 216# Since: 2.1 217## 218{ 'struct': 'SpiceBasicInfo', 219 'data': { 'host': 'str', 220 'port': 'str', 221 'family': 'NetworkAddressFamily' }, 222 'if': 'CONFIG_SPICE' } 223 224## 225# @SpiceServerInfo: 226# 227# Information about a SPICE server 228# 229# @auth: authentication method 230# 231# Since: 2.1 232## 233{ 'struct': 'SpiceServerInfo', 234 'base': 'SpiceBasicInfo', 235 'data': { '*auth': 'str' }, 236 'if': 'CONFIG_SPICE' } 237 238## 239# @SpiceChannel: 240# 241# Information about a SPICE client channel. 242# 243# @connection-id: SPICE connection id number. All channels with the 244# same id belong to the same SPICE session. 245# 246# @channel-type: SPICE channel type number. "1" is the main control 247# channel, filter for this one if you want to track spice sessions 248# only 249# 250# @channel-id: SPICE channel ID number. Usually "0", might be 251# different when multiple channels of the same type exist, such as 252# multiple display channels in a multihead setup 253# 254# @tls: true if the channel is encrypted, false otherwise. 255# 256# Since: 0.14 257## 258{ 'struct': 'SpiceChannel', 259 'base': 'SpiceBasicInfo', 260 'data': {'connection-id': 'int', 'channel-type': 'int', 'channel-id': 'int', 261 'tls': 'bool'}, 262 'if': 'CONFIG_SPICE' } 263 264## 265# @SpiceQueryMouseMode: 266# 267# An enumeration of Spice mouse states. 268# 269# @client: Mouse cursor position is determined by the client. 270# 271# @server: Mouse cursor position is determined by the server. 272# 273# @unknown: No information is available about mouse mode used by the 274# spice server. 275# 276# .. note:: spice/enums.h has a SpiceMouseMode already, hence the name. 277# 278# Since: 1.1 279## 280{ 'enum': 'SpiceQueryMouseMode', 281 'data': [ 'client', 'server', 'unknown' ], 282 'if': 'CONFIG_SPICE' } 283 284## 285# @SpiceInfo: 286# 287# Information about the SPICE session. 288# 289# @enabled: true if the SPICE server is enabled, false otherwise 290# 291# @migrated: true if the last guest migration completed and spice 292# migration had completed as well, false otherwise (since 1.4) 293# 294# @host: The hostname the SPICE server is bound to. This depends on 295# the name resolution on the host and may be an IP address. 296# 297# @port: The SPICE server's port number. 298# 299# @compiled-version: SPICE server version. 300# 301# @tls-port: The SPICE server's TLS port number. 302# 303# @auth: the current authentication type used by the server 304# 305# - 'none' if no authentication is being used 306# - 'spice' uses SASL or direct TLS authentication, depending on 307# command line options 308# 309# @mouse-mode: The mode in which the mouse cursor is displayed 310# currently. Can be determined by the client or the server, or 311# unknown if spice server doesn't provide this information. 312# (since: 1.1) 313# 314# @channels: a list of @SpiceChannel for each active spice channel 315# 316# Since: 0.14 317## 318{ 'struct': 'SpiceInfo', 319 'data': {'enabled': 'bool', 'migrated': 'bool', '*host': 'str', '*port': 'int', 320 '*tls-port': 'int', '*auth': 'str', '*compiled-version': 'str', 321 'mouse-mode': 'SpiceQueryMouseMode', '*channels': ['SpiceChannel']}, 322 'if': 'CONFIG_SPICE' } 323 324## 325# @query-spice: 326# 327# Returns information about the current SPICE server 328# 329# Returns: @SpiceInfo 330# 331# Since: 0.14 332# 333# Example: 334# 335# -> { "execute": "query-spice" } 336# <- { "return": { 337# "enabled": true, 338# "auth": "spice", 339# "port": 5920, 340# "migrated":false, 341# "tls-port": 5921, 342# "host": "0.0.0.0", 343# "mouse-mode":"client", 344# "channels": [ 345# { 346# "port": "54924", 347# "family": "ipv4", 348# "channel-type": 1, 349# "connection-id": 1804289383, 350# "host": "127.0.0.1", 351# "channel-id": 0, 352# "tls": true 353# }, 354# { 355# "port": "36710", 356# "family": "ipv4", 357# "channel-type": 4, 358# "connection-id": 1804289383, 359# "host": "127.0.0.1", 360# "channel-id": 0, 361# "tls": false 362# }, 363# ... 364# ] 365# } 366# } 367## 368{ 'command': 'query-spice', 'returns': 'SpiceInfo', 369 'if': 'CONFIG_SPICE' } 370 371## 372# @SPICE_CONNECTED: 373# 374# Emitted when a SPICE client establishes a connection 375# 376# @server: server information 377# 378# @client: client information 379# 380# Since: 0.14 381# 382# Example: 383# 384# <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707}, 385# "event": "SPICE_CONNECTED", 386# "data": { 387# "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"}, 388# "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"} 389# }} 390## 391{ 'event': 'SPICE_CONNECTED', 392 'data': { 'server': 'SpiceBasicInfo', 393 'client': 'SpiceBasicInfo' }, 394 'if': 'CONFIG_SPICE' } 395 396## 397# @SPICE_INITIALIZED: 398# 399# Emitted after initial handshake and authentication takes place (if 400# any) and the SPICE channel is up and running 401# 402# @server: server information 403# 404# @client: client information 405# 406# Since: 0.14 407# 408# Example: 409# 410# <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172}, 411# "event": "SPICE_INITIALIZED", 412# "data": {"server": {"auth": "spice", "port": "5921", 413# "family": "ipv4", "host": "127.0.0.1"}, 414# "client": {"port": "49004", "family": "ipv4", "channel-type": 3, 415# "connection-id": 1804289383, "host": "127.0.0.1", 416# "channel-id": 0, "tls": true} 417# }} 418## 419{ 'event': 'SPICE_INITIALIZED', 420 'data': { 'server': 'SpiceServerInfo', 421 'client': 'SpiceChannel' }, 422 'if': 'CONFIG_SPICE' } 423 424## 425# @SPICE_DISCONNECTED: 426# 427# Emitted when the SPICE connection is closed 428# 429# @server: server information 430# 431# @client: client information 432# 433# Since: 0.14 434# 435# Example: 436# 437# <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707}, 438# "event": "SPICE_DISCONNECTED", 439# "data": { 440# "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"}, 441# "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"} 442# }} 443## 444{ 'event': 'SPICE_DISCONNECTED', 445 'data': { 'server': 'SpiceBasicInfo', 446 'client': 'SpiceBasicInfo' }, 447 'if': 'CONFIG_SPICE' } 448 449## 450# @SPICE_MIGRATE_COMPLETED: 451# 452# Emitted when SPICE migration has completed 453# 454# Since: 1.3 455# 456# Example: 457# 458# <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172}, 459# "event": "SPICE_MIGRATE_COMPLETED" } 460## 461{ 'event': 'SPICE_MIGRATE_COMPLETED', 462 'if': 'CONFIG_SPICE' } 463 464## 465# == VNC 466## 467 468## 469# @VncBasicInfo: 470# 471# The basic information for vnc network connection 472# 473# @host: IP address 474# 475# @service: The service name of the vnc port. This may depend on the 476# host system's service database so symbolic names should not be 477# relied on. 478# 479# @family: address family 480# 481# @websocket: true in case the socket is a websocket (since 2.3). 482# 483# Since: 2.1 484## 485{ 'struct': 'VncBasicInfo', 486 'data': { 'host': 'str', 487 'service': 'str', 488 'family': 'NetworkAddressFamily', 489 'websocket': 'bool' }, 490 'if': 'CONFIG_VNC' } 491 492## 493# @VncServerInfo: 494# 495# The network connection information for server 496# 497# @auth: authentication method used for the plain (non-websocket) VNC 498# server 499# 500# Since: 2.1 501## 502{ 'struct': 'VncServerInfo', 503 'base': 'VncBasicInfo', 504 'data': { '*auth': 'str' }, 505 'if': 'CONFIG_VNC' } 506 507## 508# @VncClientInfo: 509# 510# Information about a connected VNC client. 511# 512# @x509_dname: If x509 authentication is in use, the Distinguished 513# Name of the client. 514# 515# @sasl_username: If SASL authentication is in use, the SASL username 516# used for authentication. 517# 518# Since: 0.14 519## 520{ 'struct': 'VncClientInfo', 521 'base': 'VncBasicInfo', 522 'data': { '*x509_dname': 'str', '*sasl_username': 'str' }, 523 'if': 'CONFIG_VNC' } 524 525## 526# @VncInfo: 527# 528# Information about the VNC session. 529# 530# @enabled: true if the VNC server is enabled, false otherwise 531# 532# @host: The hostname the VNC server is bound to. This depends on the 533# name resolution on the host and may be an IP address. 534# 535# @family: 536# - 'ipv6' if the host is listening for IPv6 connections 537# - 'ipv4' if the host is listening for IPv4 connections 538# - 'unix' if the host is listening on a unix domain socket 539# - 'unknown' otherwise 540# 541# @service: The service name of the server's port. This may depends 542# on the host system's service database so symbolic names should 543# not be relied on. 544# 545# @auth: the current authentication type used by the server 546# 547# - 'none' if no authentication is being used 548# - 'vnc' if VNC authentication is being used 549# - 'vencrypt+plain' if VEncrypt is used with plain text 550# authentication 551# - 'vencrypt+tls+none' if VEncrypt is used with TLS and no 552# authentication 553# - 'vencrypt+tls+vnc' if VEncrypt is used with TLS and VNC 554# authentication 555# - 'vencrypt+tls+plain' if VEncrypt is used with TLS and plain 556# text auth 557# - 'vencrypt+x509+none' if VEncrypt is used with x509 and no auth 558# - 'vencrypt+x509+vnc' if VEncrypt is used with x509 and VNC auth 559# - 'vencrypt+x509+plain' if VEncrypt is used with x509 and plain 560# text auth 561# - 'vencrypt+tls+sasl' if VEncrypt is used with TLS and SASL auth 562# - 'vencrypt+x509+sasl' if VEncrypt is used with x509 and SASL 563# auth 564# 565# @clients: a list of @VncClientInfo of all currently connected 566# clients 567# 568# Since: 0.14 569## 570{ 'struct': 'VncInfo', 571 'data': {'enabled': 'bool', '*host': 'str', 572 '*family': 'NetworkAddressFamily', 573 '*service': 'str', '*auth': 'str', '*clients': ['VncClientInfo']}, 574 'if': 'CONFIG_VNC' } 575 576## 577# @VncPrimaryAuth: 578# 579# vnc primary authentication method. 580# 581# Since: 2.3 582## 583{ 'enum': 'VncPrimaryAuth', 584 'data': [ 'none', 'vnc', 'ra2', 'ra2ne', 'tight', 'ultra', 585 'tls', 'vencrypt', 'sasl' ], 586 'if': 'CONFIG_VNC' } 587 588## 589# @VncVencryptSubAuth: 590# 591# vnc sub authentication method with vencrypt. 592# 593# Since: 2.3 594## 595{ 'enum': 'VncVencryptSubAuth', 596 'data': [ 'plain', 597 'tls-none', 'x509-none', 598 'tls-vnc', 'x509-vnc', 599 'tls-plain', 'x509-plain', 600 'tls-sasl', 'x509-sasl' ], 601 'if': 'CONFIG_VNC' } 602 603## 604# @VncServerInfo2: 605# 606# The network connection information for server 607# 608# @auth: The current authentication type used by the servers 609# 610# @vencrypt: The vencrypt sub authentication type used by the servers, 611# only specified in case auth == vencrypt. 612# 613# Since: 2.9 614## 615{ 'struct': 'VncServerInfo2', 616 'base': 'VncBasicInfo', 617 'data': { 'auth' : 'VncPrimaryAuth', 618 '*vencrypt' : 'VncVencryptSubAuth' }, 619 'if': 'CONFIG_VNC' } 620 621## 622# @VncInfo2: 623# 624# Information about a vnc server 625# 626# @id: vnc server name. 627# 628# @server: A list of @VncBasincInfo describing all listening sockets. 629# The list can be empty (in case the vnc server is disabled). It 630# also may have multiple entries: normal + websocket, possibly 631# also ipv4 + ipv6 in the future. 632# 633# @clients: A list of @VncClientInfo of all currently connected 634# clients. The list can be empty, for obvious reasons. 635# 636# @auth: The current authentication type used by the non-websockets 637# servers 638# 639# @vencrypt: The vencrypt authentication type used by the servers, 640# only specified in case auth == vencrypt. 641# 642# @display: The display device the vnc server is linked to. 643# 644# Since: 2.3 645## 646{ 'struct': 'VncInfo2', 647 'data': { 'id' : 'str', 648 'server' : ['VncServerInfo2'], 649 'clients' : ['VncClientInfo'], 650 'auth' : 'VncPrimaryAuth', 651 '*vencrypt' : 'VncVencryptSubAuth', 652 '*display' : 'str' }, 653 'if': 'CONFIG_VNC' } 654 655## 656# @query-vnc: 657# 658# Returns information about the current VNC server 659# 660# Returns: @VncInfo 661# 662# Since: 0.14 663# 664# Example: 665# 666# -> { "execute": "query-vnc" } 667# <- { "return": { 668# "enabled":true, 669# "host":"0.0.0.0", 670# "service":"50402", 671# "auth":"vnc", 672# "family":"ipv4", 673# "clients":[ 674# { 675# "host":"127.0.0.1", 676# "service":"50401", 677# "family":"ipv4", 678# "websocket":false 679# } 680# ] 681# } 682# } 683## 684{ 'command': 'query-vnc', 'returns': 'VncInfo', 685 'if': 'CONFIG_VNC' } 686## 687# @query-vnc-servers: 688# 689# Returns a list of vnc servers. The list can be empty. 690# 691# Returns: a list of @VncInfo2 692# 693# Since: 2.3 694## 695{ 'command': 'query-vnc-servers', 'returns': ['VncInfo2'], 696 'if': 'CONFIG_VNC' } 697 698## 699# @change-vnc-password: 700# 701# Change the VNC server password. 702# 703# @password: the new password to use with VNC authentication 704# 705# Since: 1.1 706# 707# .. note:: An empty password in this command will set the password to 708# the empty string. Existing clients are unaffected by executing 709# this command. 710## 711{ 'command': 'change-vnc-password', 712 'data': { 'password': 'str' }, 713 'if': 'CONFIG_VNC' } 714 715## 716# @VNC_CONNECTED: 717# 718# Emitted when a VNC client establishes a connection 719# 720# @server: server information 721# 722# @client: client information 723# 724# .. note:: This event is emitted before any authentication takes place, 725# thus the authentication ID is not provided. 726# 727# Since: 0.13 728# 729# Example: 730# 731# <- { "event": "VNC_CONNECTED", 732# "data": { 733# "server": { "auth": "sasl", "family": "ipv4", "websocket": false, 734# "service": "5901", "host": "0.0.0.0" }, 735# "client": { "family": "ipv4", "service": "58425", 736# "host": "127.0.0.1", "websocket": false } }, 737# "timestamp": { "seconds": 1262976601, "microseconds": 975795 } } 738## 739{ 'event': 'VNC_CONNECTED', 740 'data': { 'server': 'VncServerInfo', 741 'client': 'VncBasicInfo' }, 742 'if': 'CONFIG_VNC' } 743 744## 745# @VNC_INITIALIZED: 746# 747# Emitted after authentication takes place (if any) and the VNC 748# session is made active 749# 750# @server: server information 751# 752# @client: client information 753# 754# Since: 0.13 755# 756# Example: 757# 758# <- { "event": "VNC_INITIALIZED", 759# "data": { 760# "server": { "auth": "sasl", "family": "ipv4", "websocket": false, 761# "service": "5901", "host": "0.0.0.0"}, 762# "client": { "family": "ipv4", "service": "46089", "websocket": false, 763# "host": "127.0.0.1", "sasl_username": "luiz" } }, 764# "timestamp": { "seconds": 1263475302, "microseconds": 150772 } } 765## 766{ 'event': 'VNC_INITIALIZED', 767 'data': { 'server': 'VncServerInfo', 768 'client': 'VncClientInfo' }, 769 'if': 'CONFIG_VNC' } 770 771## 772# @VNC_DISCONNECTED: 773# 774# Emitted when the connection is closed 775# 776# @server: server information 777# 778# @client: client information 779# 780# Since: 0.13 781# 782# Example: 783# 784# <- { "event": "VNC_DISCONNECTED", 785# "data": { 786# "server": { "auth": "sasl", "family": "ipv4", "websocket": false, 787# "service": "5901", "host": "0.0.0.0" }, 788# "client": { "family": "ipv4", "service": "58425", "websocket": false, 789# "host": "127.0.0.1", "sasl_username": "luiz" } }, 790# "timestamp": { "seconds": 1262976601, "microseconds": 975795 } } 791## 792{ 'event': 'VNC_DISCONNECTED', 793 'data': { 'server': 'VncServerInfo', 794 'client': 'VncClientInfo' }, 795 'if': 'CONFIG_VNC' } 796 797## 798# = Input 799## 800 801## 802# @MouseInfo: 803# 804# Information about a mouse device. 805# 806# @name: the name of the mouse device 807# 808# @index: the index of the mouse device 809# 810# @current: true if this device is currently receiving mouse events 811# 812# @absolute: true if this device supports absolute coordinates as 813# input 814# 815# Since: 0.14 816## 817{ 'struct': 'MouseInfo', 818 'data': {'name': 'str', 'index': 'int', 'current': 'bool', 819 'absolute': 'bool'} } 820 821## 822# @query-mice: 823# 824# Returns information about each active mouse device 825# 826# Returns: a list of @MouseInfo for each device 827# 828# Since: 0.14 829# 830# Example: 831# 832# -> { "execute": "query-mice" } 833# <- { "return": [ 834# { 835# "name":"QEMU Microsoft Mouse", 836# "index":0, 837# "current":false, 838# "absolute":false 839# }, 840# { 841# "name":"QEMU PS/2 Mouse", 842# "index":1, 843# "current":true, 844# "absolute":true 845# } 846# ] 847# } 848## 849{ 'command': 'query-mice', 'returns': ['MouseInfo'] } 850 851## 852# @QKeyCode: 853# 854# An enumeration of key name. 855# 856# This is used by the @send-key command. 857# 858# @unmapped: since 2.0 859# 860# @pause: since 2.0 861# 862# @ro: since 2.4 863# 864# @kp_comma: since 2.4 865# 866# @kp_equals: since 2.6 867# 868# @power: since 2.6 869# 870# @hiragana: since 2.9 871# 872# @henkan: since 2.9 873# 874# @yen: since 2.9 875# 876# @sleep: since 2.10 877# 878# @wake: since 2.10 879# 880# @audionext: since 2.10 881# 882# @audioprev: since 2.10 883# 884# @audiostop: since 2.10 885# 886# @audioplay: since 2.10 887# 888# @audiomute: since 2.10 889# 890# @volumeup: since 2.10 891# 892# @volumedown: since 2.10 893# 894# @mediaselect: since 2.10 895# 896# @mail: since 2.10 897# 898# @calculator: since 2.10 899# 900# @computer: since 2.10 901# 902# @ac_home: since 2.10 903# 904# @ac_back: since 2.10 905# 906# @ac_forward: since 2.10 907# 908# @ac_refresh: since 2.10 909# 910# @ac_bookmarks: since 2.10 911# 912# @muhenkan: since 2.12 913# 914# @katakanahiragana: since 2.12 915# 916# @lang1: since 6.1 917# 918# @lang2: since 6.1 919# 920# @f13: since 8.0 921# 922# @f14: since 8.0 923# 924# @f15: since 8.0 925# 926# @f16: since 8.0 927# 928# @f17: since 8.0 929# 930# @f18: since 8.0 931# 932# @f19: since 8.0 933# 934# @f20: since 8.0 935# 936# @f21: since 8.0 937# 938# @f22: since 8.0 939# 940# @f23: since 8.0 941# 942# @f24: since 8.0 943# 944# 'sysrq' was mistakenly added to hack around the fact that the ps2 945# driver was not generating correct scancodes sequences when 946# 'alt+print' was pressed. This flaw is now fixed and the 'sysrq' key 947# serves no further purpose. Any further use of 'sysrq' will be 948# transparently changed to 'print', so they are effectively synonyms. 949# 950# Since: 1.3 951## 952{ 'enum': 'QKeyCode', 953 'data': [ 'unmapped', 954 'shift', 'shift_r', 'alt', 'alt_r', 'ctrl', 955 'ctrl_r', 'menu', 'esc', '1', '2', '3', '4', '5', '6', '7', '8', 956 '9', '0', 'minus', 'equal', 'backspace', 'tab', 'q', 'w', 'e', 957 'r', 't', 'y', 'u', 'i', 'o', 'p', 'bracket_left', 'bracket_right', 958 'ret', 'a', 's', 'd', 'f', 'g', 'h', 'j', 'k', 'l', 'semicolon', 959 'apostrophe', 'grave_accent', 'backslash', 'z', 'x', 'c', 'v', 'b', 960 'n', 'm', 'comma', 'dot', 'slash', 'asterisk', 'spc', 'caps_lock', 961 'f1', 'f2', 'f3', 'f4', 'f5', 'f6', 'f7', 'f8', 'f9', 'f10', 962 'num_lock', 'scroll_lock', 'kp_divide', 'kp_multiply', 963 'kp_subtract', 'kp_add', 'kp_enter', 'kp_decimal', 'sysrq', 'kp_0', 964 'kp_1', 'kp_2', 'kp_3', 'kp_4', 'kp_5', 'kp_6', 'kp_7', 'kp_8', 965 'kp_9', 'less', 'f11', 'f12', 'print', 'home', 'pgup', 'pgdn', 'end', 966 'left', 'up', 'down', 'right', 'insert', 'delete', 'stop', 'again', 967 'props', 'undo', 'front', 'copy', 'open', 'paste', 'find', 'cut', 968 'lf', 'help', 'meta_l', 'meta_r', 'compose', 'pause', 969 'ro', 'hiragana', 'henkan', 'yen', 'muhenkan', 'katakanahiragana', 970 'kp_comma', 'kp_equals', 'power', 'sleep', 'wake', 971 'audionext', 'audioprev', 'audiostop', 'audioplay', 'audiomute', 972 'volumeup', 'volumedown', 'mediaselect', 973 'mail', 'calculator', 'computer', 974 'ac_home', 'ac_back', 'ac_forward', 'ac_refresh', 'ac_bookmarks', 975 'lang1', 'lang2','f13','f14','f15','f16','f17','f18','f19','f20','f21','f22','f23','f24' ] } 976 977## 978# @KeyValueKind: 979# 980# Since: 1.3 981## 982{ 'enum': 'KeyValueKind', 983 'data': [ 'number', 'qcode' ] } 984 985## 986# @IntWrapper: 987# 988# @data: a numeric key code 989# 990# Since: 1.3 991## 992{ 'struct': 'IntWrapper', 993 'data': { 'data': 'int' } } 994 995## 996# @QKeyCodeWrapper: 997# 998# @data: An enumeration of key name 999# 1000# Since: 1.3 1001## 1002{ 'struct': 'QKeyCodeWrapper', 1003 'data': { 'data': 'QKeyCode' } } 1004 1005## 1006# @KeyValue: 1007# 1008# Represents a keyboard key. 1009# 1010# @type: key encoding 1011# 1012# Since: 1.3 1013## 1014{ 'union': 'KeyValue', 1015 'base': { 'type': 'KeyValueKind' }, 1016 'discriminator': 'type', 1017 'data': { 1018 'number': 'IntWrapper', 1019 'qcode': 'QKeyCodeWrapper' } } 1020 1021## 1022# @send-key: 1023# 1024# Send keys to guest. 1025# 1026# @keys: An array of @KeyValue elements. All @KeyValues in this array 1027# are simultaneously sent to the guest. A @KeyValue.number value 1028# is sent directly to the guest, while @KeyValue.qcode must be a 1029# valid @QKeyCode value 1030# 1031# @hold-time: time to delay key up events, milliseconds. Defaults to 1032# 100 1033# 1034# Errors: 1035# - If key is unknown or redundant, GenericError 1036# 1037# Since: 1.3 1038# 1039# Example: 1040# 1041# -> { "execute": "send-key", 1042# "arguments": { "keys": [ { "type": "qcode", "data": "ctrl" }, 1043# { "type": "qcode", "data": "alt" }, 1044# { "type": "qcode", "data": "delete" } ] } } 1045# <- { "return": {} } 1046## 1047{ 'command': 'send-key', 1048 'data': { 'keys': ['KeyValue'], '*hold-time': 'int' } } 1049 1050## 1051# @InputButton: 1052# 1053# Button of a pointer input device (mouse, tablet). 1054# 1055# @side: front side button of a 5-button mouse (since 2.9) 1056# 1057# @extra: rear side button of a 5-button mouse (since 2.9) 1058# 1059# @touch: screen contact on a multi-touch device (since 8.1) 1060# 1061# Since: 2.0 1062## 1063{ 'enum' : 'InputButton', 1064 'data' : [ 'left', 'middle', 'right', 'wheel-up', 'wheel-down', 'side', 1065 'extra', 'wheel-left', 'wheel-right', 'touch' ] } 1066 1067## 1068# @InputAxis: 1069# 1070# Position axis of a pointer input device (mouse, tablet). 1071# 1072# Since: 2.0 1073## 1074{ 'enum' : 'InputAxis', 1075 'data' : [ 'x', 'y' ] } 1076 1077## 1078# @InputMultiTouchType: 1079# 1080# Type of a multi-touch event. 1081# 1082# @begin: A new touch event sequence has just started. 1083# 1084# @update: A touch event sequence has been updated. 1085# 1086# @end: A touch event sequence has finished. 1087# 1088# @cancel: A touch event sequence has been canceled. 1089# 1090# @data: Absolute position data. 1091# 1092# Since: 8.1 1093## 1094{ 'enum' : 'InputMultiTouchType', 1095 'data' : [ 'begin', 'update', 'end', 'cancel', 'data' ] } 1096 1097 1098## 1099# @InputKeyEvent: 1100# 1101# Keyboard input event. 1102# 1103# @key: Which key this event is for. 1104# 1105# @down: True for key-down and false for key-up events. 1106# 1107# Since: 2.0 1108## 1109{ 'struct' : 'InputKeyEvent', 1110 'data' : { 'key' : 'KeyValue', 1111 'down' : 'bool' } } 1112 1113## 1114# @InputBtnEvent: 1115# 1116# Pointer button input event. 1117# 1118# @button: Which button this event is for. 1119# 1120# @down: True for key-down and false for key-up events. 1121# 1122# Since: 2.0 1123## 1124{ 'struct' : 'InputBtnEvent', 1125 'data' : { 'button' : 'InputButton', 1126 'down' : 'bool' } } 1127 1128## 1129# @InputMoveEvent: 1130# 1131# Pointer motion input event. 1132# 1133# @axis: Which axis is referenced by @value. 1134# 1135# @value: Pointer position. For absolute coordinates the valid range 1136# is 0 -> 0x7ffff 1137# 1138# Since: 2.0 1139## 1140{ 'struct' : 'InputMoveEvent', 1141 'data' : { 'axis' : 'InputAxis', 1142 'value' : 'int' } } 1143 1144## 1145# @InputMultiTouchEvent: 1146# 1147# MultiTouch input event. 1148# 1149# @type: The type of multi-touch event. 1150# 1151# @slot: Which slot has generated the event. 1152# 1153# @tracking-id: ID to correlate this event with previously generated 1154# events. 1155# 1156# @axis: Which axis is referenced by @value. 1157# 1158# @value: Contact position. 1159# 1160# Since: 8.1 1161## 1162{ 'struct' : 'InputMultiTouchEvent', 1163 'data' : { 'type' : 'InputMultiTouchType', 1164 'slot' : 'int', 1165 'tracking-id': 'int', 1166 'axis' : 'InputAxis', 1167 'value' : 'int' } } 1168 1169## 1170# @InputEventKind: 1171# 1172# @key: a keyboard input event 1173# 1174# @btn: a pointer button input event 1175# 1176# @rel: a relative pointer motion input event 1177# 1178# @abs: an absolute pointer motion input event 1179# 1180# @mtt: a multi-touch input event 1181# 1182# Since: 2.0 1183## 1184{ 'enum': 'InputEventKind', 1185 'data': [ 'key', 'btn', 'rel', 'abs', 'mtt' ] } 1186 1187## 1188# @InputKeyEventWrapper: 1189# 1190# @data: Keyboard input event 1191# 1192# Since: 2.0 1193## 1194{ 'struct': 'InputKeyEventWrapper', 1195 'data': { 'data': 'InputKeyEvent' } } 1196 1197## 1198# @InputBtnEventWrapper: 1199# 1200# @data: Pointer button input event 1201# 1202# Since: 2.0 1203## 1204{ 'struct': 'InputBtnEventWrapper', 1205 'data': { 'data': 'InputBtnEvent' } } 1206 1207## 1208# @InputMoveEventWrapper: 1209# 1210# @data: Pointer motion input event 1211# 1212# Since: 2.0 1213## 1214{ 'struct': 'InputMoveEventWrapper', 1215 'data': { 'data': 'InputMoveEvent' } } 1216 1217## 1218# @InputMultiTouchEventWrapper: 1219# 1220# @data: MultiTouch input event 1221# 1222# Since: 8.1 1223## 1224{ 'struct': 'InputMultiTouchEventWrapper', 1225 'data': { 'data': 'InputMultiTouchEvent' } } 1226 1227## 1228# @InputEvent: 1229# 1230# Input event union. 1231# 1232# @type: the type of input event 1233# 1234# Since: 2.0 1235## 1236{ 'union' : 'InputEvent', 1237 'base': { 'type': 'InputEventKind' }, 1238 'discriminator': 'type', 1239 'data' : { 'key' : 'InputKeyEventWrapper', 1240 'btn' : 'InputBtnEventWrapper', 1241 'rel' : 'InputMoveEventWrapper', 1242 'abs' : 'InputMoveEventWrapper', 1243 'mtt' : 'InputMultiTouchEventWrapper' } } 1244 1245## 1246# @input-send-event: 1247# 1248# Send input event(s) to guest. 1249# 1250# The @device and @head parameters can be used to send the input event 1251# to specific input devices in case (a) multiple input devices of the 1252# same kind are added to the virtual machine and (b) you have 1253# configured input routing (see docs/multiseat.txt) for those input 1254# devices. The parameters work exactly like the device and head 1255# properties of input devices. If @device is missing, only devices 1256# that have no input routing config are admissible. If @device is 1257# specified, both input devices with and without input routing config 1258# are admissible, but devices with input routing config take 1259# precedence. 1260# 1261# @device: display device to send event(s) to. 1262# 1263# @head: head to send event(s) to, in case the display device supports 1264# multiple scanouts. 1265# 1266# @events: List of InputEvent union. 1267# 1268# Since: 2.6 1269# 1270# .. note:: The consoles are visible in the qom tree, under 1271# ``/backend/console[$index]``. They have a device link and head 1272# property, so it is possible to map which console belongs to which 1273# device and display. 1274# 1275# Examples: 1276# 1277# 1. Press left mouse button. 1278# 1279# -> { "execute": "input-send-event", 1280# "arguments": { "device": "video0", 1281# "events": [ { "type": "btn", 1282# "data" : { "down": true, "button": "left" } } ] } } 1283# <- { "return": {} } 1284# 1285# -> { "execute": "input-send-event", 1286# "arguments": { "device": "video0", 1287# "events": [ { "type": "btn", 1288# "data" : { "down": false, "button": "left" } } ] } } 1289# <- { "return": {} } 1290# 1291# 2. Press ctrl-alt-del. 1292# 1293# -> { "execute": "input-send-event", 1294# "arguments": { "events": [ 1295# { "type": "key", "data" : { "down": true, 1296# "key": {"type": "qcode", "data": "ctrl" } } }, 1297# { "type": "key", "data" : { "down": true, 1298# "key": {"type": "qcode", "data": "alt" } } }, 1299# { "type": "key", "data" : { "down": true, 1300# "key": {"type": "qcode", "data": "delete" } } } ] } } 1301# <- { "return": {} } 1302# 1303# 3. Move mouse pointer to absolute coordinates (20000, 400). 1304# 1305# -> { "execute": "input-send-event" , 1306# "arguments": { "events": [ 1307# { "type": "abs", "data" : { "axis": "x", "value" : 20000 } }, 1308# { "type": "abs", "data" : { "axis": "y", "value" : 400 } } ] } } 1309# <- { "return": {} } 1310## 1311{ 'command': 'input-send-event', 1312 'data': { '*device': 'str', 1313 '*head' : 'int', 1314 'events' : [ 'InputEvent' ] } } 1315 1316## 1317# @DisplayGTK: 1318# 1319# GTK display options. 1320# 1321# @grab-on-hover: Grab keyboard input on mouse hover. 1322# 1323# @zoom-to-fit: Zoom guest display to fit into the host window. When 1324# turned off the host window will be resized instead. In case the 1325# display device can notify the guest on window resizes 1326# (virtio-gpu) this will default to "on", assuming the guest will 1327# resize the display to match the window size then. Otherwise it 1328# defaults to "off". (Since 3.1) 1329# 1330# @show-tabs: Display the tab bar for switching between the various 1331# graphical interfaces (e.g. VGA and virtual console character 1332# devices) by default. (Since 7.1) 1333# 1334# @show-menubar: Display the main window menubar. Defaults to "on". 1335# (Since 8.0) 1336# 1337# Since: 2.12 1338## 1339{ 'struct' : 'DisplayGTK', 1340 'data' : { '*grab-on-hover' : 'bool', 1341 '*zoom-to-fit' : 'bool', 1342 '*show-tabs' : 'bool', 1343 '*show-menubar' : 'bool' } } 1344 1345## 1346# @DisplayEGLHeadless: 1347# 1348# EGL headless display options. 1349# 1350# @rendernode: Which DRM render node should be used. Default is the 1351# first available node on the host. 1352# 1353# Since: 3.1 1354## 1355{ 'struct' : 'DisplayEGLHeadless', 1356 'data' : { '*rendernode' : 'str' } } 1357 1358## 1359# @DisplayDBus: 1360# 1361# DBus display options. 1362# 1363# @addr: The D-Bus bus address (default to the session bus). 1364# 1365# @rendernode: Which DRM render node should be used. Default is the 1366# first available node on the host. 1367# 1368# @p2p: Whether to use peer-to-peer connections (accepted through 1369# @add_client). 1370# 1371# @audiodev: Use the specified DBus audiodev to export audio. 1372# 1373# Since: 7.0 1374## 1375{ 'struct' : 'DisplayDBus', 1376 'data' : { '*rendernode' : 'str', 1377 '*addr': 'str', 1378 '*p2p': 'bool', 1379 '*audiodev': 'str' } } 1380 1381## 1382# @DisplayGLMode: 1383# 1384# Display OpenGL mode. 1385# 1386# @off: Disable OpenGL (default). 1387# 1388# @on: Use OpenGL, pick context type automatically. Would better be 1389# named 'auto' but is called 'on' for backward compatibility with 1390# bool type. 1391# 1392# @core: Use OpenGL with Core (desktop) Context. 1393# 1394# @es: Use OpenGL with ES (embedded systems) Context. 1395# 1396# Since: 3.0 1397## 1398{ 'enum' : 'DisplayGLMode', 1399 'data' : [ 'off', 'on', 'core', 'es' ] } 1400 1401## 1402# @DisplayCurses: 1403# 1404# Curses display options. 1405# 1406# @charset: Font charset used by guest (default: CP437). 1407# 1408# Since: 4.0 1409## 1410{ 'struct' : 'DisplayCurses', 1411 'data' : { '*charset' : 'str' } } 1412 1413## 1414# @DisplayCocoa: 1415# 1416# Cocoa display options. 1417# 1418# @left-command-key: Enable/disable forwarding of left command key to 1419# guest. Allows command-tab window switching on the host without 1420# sending this key to the guest when "off". Defaults to "on" 1421# 1422# @full-grab: Capture all key presses, including system combos. This 1423# requires accessibility permissions, since it performs a global 1424# grab on key events. (default: off) See 1425# https://support.apple.com/en-in/guide/mac-help/mh32356/mac 1426# 1427# @swap-opt-cmd: Swap the Option and Command keys so that their key 1428# codes match their position on non-Mac keyboards and you can use 1429# Meta/Super and Alt where you expect them. (default: off) 1430# 1431# @zoom-to-fit: Zoom guest display to fit into the host window. When 1432# turned off the host window will be resized instead. Defaults to 1433# "off". (Since 8.2) 1434# 1435# @zoom-interpolation: Apply interpolation to smooth output when 1436# zoom-to-fit is enabled. Defaults to "off". (Since 9.0) 1437# 1438# Since: 7.0 1439## 1440{ 'struct': 'DisplayCocoa', 1441 'data': { 1442 '*left-command-key': 'bool', 1443 '*full-grab': 'bool', 1444 '*swap-opt-cmd': 'bool', 1445 '*zoom-to-fit': 'bool', 1446 '*zoom-interpolation': 'bool' 1447 } } 1448 1449## 1450# @HotKeyMod: 1451# 1452# Set of modifier keys that need to be held for shortcut key actions. 1453# 1454# Since: 7.1 1455## 1456{ 'enum' : 'HotKeyMod', 1457 'data' : [ 'lctrl-lalt', 'lshift-lctrl-lalt', 'rctrl' ] } 1458 1459## 1460# @DisplaySDL: 1461# 1462# SDL2 display options. 1463# 1464# @grab-mod: Modifier keys that should be pressed together with the 1465# "G" key to release the mouse grab. 1466# 1467# Since: 7.1 1468## 1469{ 'struct' : 'DisplaySDL', 1470 'data' : { '*grab-mod' : 'HotKeyMod' } } 1471 1472## 1473# @DisplayType: 1474# 1475# Display (user interface) type. 1476# 1477# @default: The default user interface, selecting from the first 1478# available of gtk, sdl, cocoa, and vnc. 1479# 1480# @none: No user interface or video output display. The guest will 1481# still see an emulated graphics card, but its output will not be 1482# displayed to the QEMU user. 1483# 1484# @gtk: The GTK user interface. 1485# 1486# @sdl: The SDL user interface. 1487# 1488# @egl-headless: No user interface, offload GL operations to a local 1489# DRI device. Graphical display need to be paired with VNC or 1490# Spice. (Since 3.1) 1491# 1492# @curses: Display video output via curses. For graphics device 1493# models which support a text mode, QEMU can display this output 1494# using a curses/ncurses interface. Nothing is displayed when the 1495# graphics device is in graphical mode or if the graphics device 1496# does not support a text mode. Generally only the VGA device 1497# models support text mode. 1498# 1499# @cocoa: The Cocoa user interface. 1500# 1501# @spice-app: Set up a Spice server and run the default associated 1502# application to connect to it. The server will redirect the 1503# serial console and QEMU monitors. (Since 4.0) 1504# 1505# @dbus: Start a D-Bus service for the display. (Since 7.0) 1506# 1507# Since: 2.12 1508## 1509{ 'enum' : 'DisplayType', 1510 'data' : [ 1511 { 'name': 'default' }, 1512 { 'name': 'none' }, 1513 { 'name': 'gtk', 'if': 'CONFIG_GTK' }, 1514 { 'name': 'sdl', 'if': 'CONFIG_SDL' }, 1515 { 'name': 'egl-headless', 'if': 'CONFIG_OPENGL' }, 1516 { 'name': 'curses', 'if': 'CONFIG_CURSES' }, 1517 { 'name': 'cocoa', 'if': 'CONFIG_COCOA' }, 1518 { 'name': 'spice-app', 'if': 'CONFIG_SPICE' }, 1519 { 'name': 'dbus', 'if': 'CONFIG_DBUS_DISPLAY' } 1520 ] 1521} 1522 1523## 1524# @DisplayOptions: 1525# 1526# Display (user interface) options. 1527# 1528# @type: Which DisplayType qemu should use. 1529# 1530# @full-screen: Start user interface in fullscreen mode 1531# (default: off). 1532# 1533# @window-close: Allow to quit qemu with window close button 1534# (default: on). 1535# 1536# @show-cursor: Force showing the mouse cursor (default: off). 1537# (since: 5.0) 1538# 1539# @gl: Enable OpenGL support (default: off). 1540# 1541# Since: 2.12 1542## 1543{ 'union' : 'DisplayOptions', 1544 'base' : { 'type' : 'DisplayType', 1545 '*full-screen' : 'bool', 1546 '*window-close' : 'bool', 1547 '*show-cursor' : 'bool', 1548 '*gl' : 'DisplayGLMode' }, 1549 'discriminator' : 'type', 1550 'data' : { 1551 'gtk': { 'type': 'DisplayGTK', 'if': 'CONFIG_GTK' }, 1552 'cocoa': { 'type': 'DisplayCocoa', 'if': 'CONFIG_COCOA' }, 1553 'curses': { 'type': 'DisplayCurses', 'if': 'CONFIG_CURSES' }, 1554 'egl-headless': { 'type': 'DisplayEGLHeadless', 1555 'if': 'CONFIG_OPENGL' }, 1556 'dbus': { 'type': 'DisplayDBus', 'if': 'CONFIG_DBUS_DISPLAY' }, 1557 'sdl': { 'type': 'DisplaySDL', 'if': 'CONFIG_SDL' } 1558 } 1559} 1560 1561## 1562# @query-display-options: 1563# 1564# Returns information about display configuration 1565# 1566# Returns: @DisplayOptions 1567# 1568# Since: 3.1 1569## 1570{ 'command': 'query-display-options', 1571 'returns': 'DisplayOptions' } 1572 1573## 1574# @DisplayReloadType: 1575# 1576# Available DisplayReload types. 1577# 1578# @vnc: VNC display 1579# 1580# Since: 6.0 1581## 1582{ 'enum': 'DisplayReloadType', 1583 'data': ['vnc'] } 1584 1585## 1586# @DisplayReloadOptionsVNC: 1587# 1588# Specify the VNC reload options. 1589# 1590# @tls-certs: reload tls certs or not. 1591# 1592# Since: 6.0 1593## 1594{ 'struct': 'DisplayReloadOptionsVNC', 1595 'data': { '*tls-certs': 'bool' } } 1596 1597## 1598# @DisplayReloadOptions: 1599# 1600# Options of the display configuration reload. 1601# 1602# @type: Specify the display type. 1603# 1604# Since: 6.0 1605## 1606{ 'union': 'DisplayReloadOptions', 1607 'base': {'type': 'DisplayReloadType'}, 1608 'discriminator': 'type', 1609 'data': { 'vnc': 'DisplayReloadOptionsVNC' } } 1610 1611## 1612# @display-reload: 1613# 1614# Reload display configuration. 1615# 1616# Since: 6.0 1617# 1618# Example: 1619# 1620# -> { "execute": "display-reload", 1621# "arguments": { "type": "vnc", "tls-certs": true } } 1622# <- { "return": {} } 1623## 1624{ 'command': 'display-reload', 1625 'data': 'DisplayReloadOptions', 1626 'boxed' : true } 1627 1628## 1629# @DisplayUpdateType: 1630# 1631# Available DisplayUpdate types. 1632# 1633# @vnc: VNC display 1634# 1635# Since: 7.1 1636## 1637{ 'enum': 'DisplayUpdateType', 1638 'data': ['vnc'] } 1639 1640## 1641# @DisplayUpdateOptionsVNC: 1642# 1643# Specify the VNC reload options. 1644# 1645# @addresses: If specified, change set of addresses to listen for 1646# connections. Addresses configured for websockets are not 1647# touched. 1648# 1649# Since: 7.1 1650## 1651{ 'struct': 'DisplayUpdateOptionsVNC', 1652 'data': { '*addresses': ['SocketAddress'] } } 1653 1654## 1655# @DisplayUpdateOptions: 1656# 1657# Options of the display configuration reload. 1658# 1659# @type: Specify the display type. 1660# 1661# Since: 7.1 1662## 1663{ 'union': 'DisplayUpdateOptions', 1664 'base': {'type': 'DisplayUpdateType'}, 1665 'discriminator': 'type', 1666 'data': { 'vnc': 'DisplayUpdateOptionsVNC' } } 1667 1668## 1669# @display-update: 1670# 1671# Update display configuration. 1672# 1673# Since: 7.1 1674# 1675# Example: 1676# 1677# -> { "execute": "display-update", 1678# "arguments": { "type": "vnc", "addresses": 1679# [ { "type": "inet", "host": "0.0.0.0", 1680# "port": "5901" } ] } } 1681# <- { "return": {} } 1682## 1683{ 'command': 'display-update', 1684 'data': 'DisplayUpdateOptions', 1685 'boxed' : true } 1686 1687## 1688# @client_migrate_info: 1689# 1690# Set migration information for remote display. This makes the server 1691# ask the client to automatically reconnect using the new parameters 1692# once migration finished successfully. Only implemented for SPICE. 1693# 1694# @protocol: must be "spice" 1695# 1696# @hostname: migration target hostname 1697# 1698# @port: spice tcp port for plaintext channels 1699# 1700# @tls-port: spice tcp port for tls-secured channels 1701# 1702# @cert-subject: server certificate subject 1703# 1704# Since: 0.14 1705# 1706# Example: 1707# 1708# -> { "execute": "client_migrate_info", 1709# "arguments": { "protocol": "spice", 1710# "hostname": "virt42.lab.kraxel.org", 1711# "port": 1234 } } 1712# <- { "return": {} } 1713## 1714{ 'command': 'client_migrate_info', 1715 'data': { 'protocol': 'str', 'hostname': 'str', '*port': 'int', 1716 '*tls-port': 'int', '*cert-subject': 'str' } } 1717