1# -*- Mode: Python -*- 2# vim: filetype=python 3# 4 5## 6# = Remote desktop 7## 8 9{ 'include': 'common.json' } 10{ 'include': 'sockets.json' } 11 12## 13# @DisplayProtocol: 14# 15# Display protocols which support changing password options. 16# 17# Since: 7.0 18## 19{ 'enum': 'DisplayProtocol', 20 'data': [ 'vnc', 'spice' ] } 21 22## 23# @SetPasswordAction: 24# 25# An action to take on changing a password on a connection with active 26# clients. 27# 28# @keep: maintain existing clients 29# 30# @fail: fail the command if clients are connected 31# 32# @disconnect: disconnect existing clients 33# 34# Since: 7.0 35## 36{ 'enum': 'SetPasswordAction', 37 'data': [ 'keep', 'fail', 'disconnect' ] } 38 39## 40# @SetPasswordOptions: 41# 42# Options for set_password. 43# 44# @protocol: 45# - 'vnc' to modify the VNC server password 46# - 'spice' to modify the Spice server password 47# 48# @password: the new password 49# 50# @connected: How to handle existing clients when changing the 51# password. If nothing is specified, defaults to 'keep'. For 52# VNC, only 'keep' is currently implemented. 53# 54# Since: 7.0 55## 56{ 'union': 'SetPasswordOptions', 57 'base': { 'protocol': 'DisplayProtocol', 58 'password': 'str', 59 '*connected': 'SetPasswordAction' }, 60 'discriminator': 'protocol', 61 'data': { 'vnc': 'SetPasswordOptionsVnc' } } 62 63## 64# @SetPasswordOptionsVnc: 65# 66# Options for set_password specific to the VNC protocol. 67# 68# @display: The id of the display where the password should be 69# changed. Defaults to the first. 70# 71# Since: 7.0 72## 73{ 'struct': 'SetPasswordOptionsVnc', 74 'data': { '*display': 'str' } } 75 76## 77# @set_password: 78# 79# Set the password of a remote display server. 80# 81# Errors: 82# - If Spice is not enabled, DeviceNotFound 83# 84# Since: 0.14 85# 86# .. qmp-example:: 87# 88# -> { "execute": "set_password", "arguments": { "protocol": "vnc", 89# "password": "secret" } } 90# <- { "return": {} } 91## 92{ 'command': 'set_password', 'boxed': true, 'data': 'SetPasswordOptions' } 93 94## 95# @ExpirePasswordOptions: 96# 97# General options for expire_password. 98# 99# @protocol: 100# - 'vnc' to modify the VNC server expiration 101# - 'spice' to modify the Spice server expiration 102# 103# @time: when to expire the password. 104# 105# - 'now' to expire the password immediately 106# - 'never' to cancel password expiration 107# - '+INT' where INT is the number of seconds from now (integer) 108# - 'INT' where INT is the absolute time in seconds 109# 110# .. note:: Time is relative to the server and currently there is no 111# way to coordinate server time with client time. It is not 112# recommended to use the absolute time version of the @time 113# parameter unless you're sure you are on the same machine as the 114# QEMU instance. 115# 116# Since: 7.0 117## 118{ 'union': 'ExpirePasswordOptions', 119 'base': { 'protocol': 'DisplayProtocol', 120 'time': 'str' }, 121 'discriminator': 'protocol', 122 'data': { 'vnc': 'ExpirePasswordOptionsVnc' } } 123 124## 125# @ExpirePasswordOptionsVnc: 126# 127# Options for expire_password specific to the VNC protocol. 128# 129# @display: The id of the display where the expiration should be 130# changed. Defaults to the first. 131# 132# Since: 7.0 133## 134{ 'struct': 'ExpirePasswordOptionsVnc', 135 'data': { '*display': 'str' } } 136 137## 138# @expire_password: 139# 140# Expire the password of a remote display server. 141# 142# Errors: 143# - If @protocol is 'spice' and Spice is not active, 144# DeviceNotFound 145# 146# Since: 0.14 147# 148# .. qmp-example:: 149# 150# -> { "execute": "expire_password", "arguments": { "protocol": "vnc", 151# "time": "+60" } } 152# <- { "return": {} } 153## 154{ 'command': 'expire_password', 'boxed': true, 'data': 'ExpirePasswordOptions' } 155 156## 157# @ImageFormat: 158# 159# Supported image format types. 160# 161# @png: PNG format 162# 163# @ppm: PPM format 164# 165# Since: 7.1 166## 167{ 'enum': 'ImageFormat', 168 'data': ['ppm', 'png'] } 169 170## 171# @screendump: 172# 173# Capture the contents of a screen and write it to a file. 174# 175# @filename: the path of a new file to store the image 176# 177# @device: ID of the display device that should be dumped. If this 178# parameter is missing, the primary display will be used. (Since 179# 2.12) 180# 181# @head: head to use in case the device supports multiple heads. If 182# this parameter is missing, head #0 will be used. Also note that 183# the head can only be specified in conjunction with the device 184# ID. (Since 2.12) 185# 186# @format: image format for screendump. (default: ppm) (Since 7.1) 187# 188# Since: 0.14 189# 190# .. qmp-example:: 191# 192# -> { "execute": "screendump", 193# "arguments": { "filename": "/tmp/image" } } 194# <- { "return": {} } 195## 196{ 'command': 'screendump', 197 'data': {'filename': 'str', '*device': 'str', '*head': 'int', 198 '*format': 'ImageFormat'}, 199 'coroutine': true, 200 'if': 'CONFIG_PIXMAN' } 201 202## 203# == Spice 204## 205 206## 207# @SpiceBasicInfo: 208# 209# The basic information for SPICE network connection 210# 211# @host: IP address 212# 213# @port: port number 214# 215# @family: address family 216# 217# Since: 2.1 218## 219{ 'struct': 'SpiceBasicInfo', 220 'data': { 'host': 'str', 221 'port': 'str', 222 'family': 'NetworkAddressFamily' }, 223 'if': 'CONFIG_SPICE' } 224 225## 226# @SpiceServerInfo: 227# 228# Information about a SPICE server 229# 230# @auth: authentication method 231# 232# Since: 2.1 233## 234{ 'struct': 'SpiceServerInfo', 235 'base': 'SpiceBasicInfo', 236 'data': { '*auth': 'str' }, 237 'if': 'CONFIG_SPICE' } 238 239## 240# @SpiceChannel: 241# 242# Information about a SPICE client channel. 243# 244# @connection-id: SPICE connection id number. All channels with the 245# same id belong to the same SPICE session. 246# 247# @channel-type: SPICE channel type number. "1" is the main control 248# channel, filter for this one if you want to track spice sessions 249# only 250# 251# @channel-id: SPICE channel ID number. Usually "0", might be 252# different when multiple channels of the same type exist, such as 253# multiple display channels in a multihead setup 254# 255# @tls: true if the channel is encrypted, false otherwise. 256# 257# Since: 0.14 258## 259{ 'struct': 'SpiceChannel', 260 'base': 'SpiceBasicInfo', 261 'data': {'connection-id': 'int', 'channel-type': 'int', 'channel-id': 'int', 262 'tls': 'bool'}, 263 'if': 'CONFIG_SPICE' } 264 265## 266# @SpiceQueryMouseMode: 267# 268# An enumeration of Spice mouse states. 269# 270# @client: Mouse cursor position is determined by the client. 271# 272# @server: Mouse cursor position is determined by the server. 273# 274# @unknown: No information is available about mouse mode used by the 275# spice server. 276# 277# Since: 1.1 278## 279{ 'enum': 'SpiceQueryMouseMode', 280 'data': [ 'client', 'server', 'unknown' ], 281 'if': 'CONFIG_SPICE' } 282 283## 284# @SpiceInfo: 285# 286# Information about the SPICE session. 287# 288# @enabled: true if the SPICE server is enabled, false otherwise 289# 290# @migrated: true if the last guest migration completed and spice 291# migration had completed as well, false otherwise (since 1.4) 292# 293# @host: The hostname the SPICE server is bound to. This depends on 294# the name resolution on the host and may be an IP address. 295# 296# @port: The SPICE server's port number. 297# 298# @compiled-version: SPICE server version. 299# 300# @tls-port: The SPICE server's TLS port number. 301# 302# @auth: the current authentication type used by the server 303# 304# - 'none' if no authentication is being used 305# - 'spice' uses SASL or direct TLS authentication, depending on 306# command line options 307# 308# @mouse-mode: The mode in which the mouse cursor is displayed 309# currently. Can be determined by the client or the server, or 310# unknown if spice server doesn't provide this information. 311# (since: 1.1) 312# 313# @channels: a list of @SpiceChannel for each active spice channel 314# 315# Since: 0.14 316## 317{ 'struct': 'SpiceInfo', 318 'data': {'enabled': 'bool', 'migrated': 'bool', '*host': 'str', '*port': 'int', 319 '*tls-port': 'int', '*auth': 'str', '*compiled-version': 'str', 320 'mouse-mode': 'SpiceQueryMouseMode', '*channels': ['SpiceChannel']}, 321 'if': 'CONFIG_SPICE' } 322 323## 324# @query-spice: 325# 326# Returns information about the current SPICE server 327# 328# Returns: @SpiceInfo 329# 330# Since: 0.14 331# 332# .. qmp-example:: 333# 334# -> { "execute": "query-spice" } 335# <- { "return": { 336# "enabled": true, 337# "auth": "spice", 338# "port": 5920, 339# "migrated":false, 340# "tls-port": 5921, 341# "host": "0.0.0.0", 342# "mouse-mode":"client", 343# "channels": [ 344# { 345# "port": "54924", 346# "family": "ipv4", 347# "channel-type": 1, 348# "connection-id": 1804289383, 349# "host": "127.0.0.1", 350# "channel-id": 0, 351# "tls": true 352# }, 353# { 354# "port": "36710", 355# "family": "ipv4", 356# "channel-type": 4, 357# "connection-id": 1804289383, 358# "host": "127.0.0.1", 359# "channel-id": 0, 360# "tls": false 361# }, 362# ... 363# ] 364# } 365# } 366## 367{ 'command': 'query-spice', 'returns': 'SpiceInfo', 368 'if': 'CONFIG_SPICE' } 369 370## 371# @SPICE_CONNECTED: 372# 373# Emitted when a SPICE client establishes a connection 374# 375# @server: server information 376# 377# @client: client information 378# 379# Since: 0.14 380# 381# .. qmp-example:: 382# 383# <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707}, 384# "event": "SPICE_CONNECTED", 385# "data": { 386# "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"}, 387# "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"} 388# }} 389## 390{ 'event': 'SPICE_CONNECTED', 391 'data': { 'server': 'SpiceBasicInfo', 392 'client': 'SpiceBasicInfo' }, 393 'if': 'CONFIG_SPICE' } 394 395## 396# @SPICE_INITIALIZED: 397# 398# Emitted after initial handshake and authentication takes place (if 399# any) and the SPICE channel is up and running 400# 401# @server: server information 402# 403# @client: client information 404# 405# Since: 0.14 406# 407# .. qmp-example:: 408# 409# <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172}, 410# "event": "SPICE_INITIALIZED", 411# "data": {"server": {"auth": "spice", "port": "5921", 412# "family": "ipv4", "host": "127.0.0.1"}, 413# "client": {"port": "49004", "family": "ipv4", "channel-type": 3, 414# "connection-id": 1804289383, "host": "127.0.0.1", 415# "channel-id": 0, "tls": true} 416# }} 417## 418{ 'event': 'SPICE_INITIALIZED', 419 'data': { 'server': 'SpiceServerInfo', 420 'client': 'SpiceChannel' }, 421 'if': 'CONFIG_SPICE' } 422 423## 424# @SPICE_DISCONNECTED: 425# 426# Emitted when the SPICE connection is closed 427# 428# @server: server information 429# 430# @client: client information 431# 432# Since: 0.14 433# 434# .. qmp-example:: 435# 436# <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707}, 437# "event": "SPICE_DISCONNECTED", 438# "data": { 439# "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"}, 440# "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"} 441# }} 442## 443{ 'event': 'SPICE_DISCONNECTED', 444 'data': { 'server': 'SpiceBasicInfo', 445 'client': 'SpiceBasicInfo' }, 446 'if': 'CONFIG_SPICE' } 447 448## 449# @SPICE_MIGRATE_COMPLETED: 450# 451# Emitted when SPICE migration has completed 452# 453# Since: 1.3 454# 455# .. qmp-example:: 456# 457# <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172}, 458# "event": "SPICE_MIGRATE_COMPLETED" } 459## 460{ 'event': 'SPICE_MIGRATE_COMPLETED', 461 'if': 'CONFIG_SPICE' } 462 463## 464# == VNC 465## 466 467## 468# @VncBasicInfo: 469# 470# The basic information for vnc network connection 471# 472# @host: IP address 473# 474# @service: The service name of the vnc port. This may depend on the 475# host system's service database so symbolic names should not be 476# relied on. 477# 478# @family: address family 479# 480# @websocket: true in case the socket is a websocket (since 2.3). 481# 482# Since: 2.1 483## 484{ 'struct': 'VncBasicInfo', 485 'data': { 'host': 'str', 486 'service': 'str', 487 'family': 'NetworkAddressFamily', 488 'websocket': 'bool' }, 489 'if': 'CONFIG_VNC' } 490 491## 492# @VncServerInfo: 493# 494# The network connection information for server 495# 496# @auth: authentication method used for the plain (non-websocket) VNC 497# server 498# 499# Since: 2.1 500## 501{ 'struct': 'VncServerInfo', 502 'base': 'VncBasicInfo', 503 'data': { '*auth': 'str' }, 504 'if': 'CONFIG_VNC' } 505 506## 507# @VncClientInfo: 508# 509# Information about a connected VNC client. 510# 511# @x509_dname: If x509 authentication is in use, the Distinguished 512# Name of the client. 513# 514# @sasl_username: If SASL authentication is in use, the SASL username 515# used for authentication. 516# 517# Since: 0.14 518## 519{ 'struct': 'VncClientInfo', 520 'base': 'VncBasicInfo', 521 'data': { '*x509_dname': 'str', '*sasl_username': 'str' }, 522 'if': 'CONFIG_VNC' } 523 524## 525# @VncInfo: 526# 527# Information about the VNC session. 528# 529# @enabled: true if the VNC server is enabled, false otherwise 530# 531# @host: The hostname the VNC server is bound to. This depends on the 532# name resolution on the host and may be an IP address. 533# 534# @family: 535# - 'ipv6' if the host is listening for IPv6 connections 536# - 'ipv4' if the host is listening for IPv4 connections 537# - 'unix' if the host is listening on a unix domain socket 538# - 'unknown' otherwise 539# 540# @service: The service name of the server's port. This may depends 541# on the host system's service database so symbolic names should 542# not be relied on. 543# 544# @auth: the current authentication type used by the server 545# 546# - 'none' if no authentication is being used 547# - 'vnc' if VNC authentication is being used 548# - 'vencrypt+plain' if VEncrypt is used with plain text 549# authentication 550# - 'vencrypt+tls+none' if VEncrypt is used with TLS and no 551# authentication 552# - 'vencrypt+tls+vnc' if VEncrypt is used with TLS and VNC 553# authentication 554# - 'vencrypt+tls+plain' if VEncrypt is used with TLS and plain 555# text auth 556# - 'vencrypt+x509+none' if VEncrypt is used with x509 and no auth 557# - 'vencrypt+x509+vnc' if VEncrypt is used with x509 and VNC auth 558# - 'vencrypt+x509+plain' if VEncrypt is used with x509 and plain 559# text auth 560# - 'vencrypt+tls+sasl' if VEncrypt is used with TLS and SASL auth 561# - 'vencrypt+x509+sasl' if VEncrypt is used with x509 and SASL 562# auth 563# 564# @clients: a list of @VncClientInfo of all currently connected 565# clients 566# 567# Since: 0.14 568## 569{ 'struct': 'VncInfo', 570 'data': {'enabled': 'bool', '*host': 'str', 571 '*family': 'NetworkAddressFamily', 572 '*service': 'str', '*auth': 'str', '*clients': ['VncClientInfo']}, 573 'if': 'CONFIG_VNC' } 574 575## 576# @VncPrimaryAuth: 577# 578# vnc primary authentication method. 579# 580# Since: 2.3 581## 582{ 'enum': 'VncPrimaryAuth', 583 'data': [ 'none', 'vnc', 'ra2', 'ra2ne', 'tight', 'ultra', 584 'tls', 'vencrypt', 'sasl' ], 585 'if': 'CONFIG_VNC' } 586 587## 588# @VncVencryptSubAuth: 589# 590# vnc sub authentication method with vencrypt. 591# 592# Since: 2.3 593## 594{ 'enum': 'VncVencryptSubAuth', 595 'data': [ 'plain', 596 'tls-none', 'x509-none', 597 'tls-vnc', 'x509-vnc', 598 'tls-plain', 'x509-plain', 599 'tls-sasl', 'x509-sasl' ], 600 'if': 'CONFIG_VNC' } 601 602## 603# @VncServerInfo2: 604# 605# The network connection information for server 606# 607# @auth: The current authentication type used by the servers 608# 609# @vencrypt: The vencrypt sub authentication type used by the servers, 610# only specified in case auth == vencrypt. 611# 612# Since: 2.9 613## 614{ 'struct': 'VncServerInfo2', 615 'base': 'VncBasicInfo', 616 'data': { 'auth' : 'VncPrimaryAuth', 617 '*vencrypt' : 'VncVencryptSubAuth' }, 618 'if': 'CONFIG_VNC' } 619 620## 621# @VncInfo2: 622# 623# Information about a vnc server 624# 625# @id: vnc server name. 626# 627# @server: A list of @VncBasincInfo describing all listening sockets. 628# The list can be empty (in case the vnc server is disabled). It 629# also may have multiple entries: normal + websocket, possibly 630# also ipv4 + ipv6 in the future. 631# 632# @clients: A list of @VncClientInfo of all currently connected 633# clients. The list can be empty, for obvious reasons. 634# 635# @auth: The current authentication type used by the non-websockets 636# servers 637# 638# @vencrypt: The vencrypt authentication type used by the servers, 639# only specified in case auth == vencrypt. 640# 641# @display: The display device the vnc server is linked to. 642# 643# Since: 2.3 644## 645{ 'struct': 'VncInfo2', 646 'data': { 'id' : 'str', 647 'server' : ['VncServerInfo2'], 648 'clients' : ['VncClientInfo'], 649 'auth' : 'VncPrimaryAuth', 650 '*vencrypt' : 'VncVencryptSubAuth', 651 '*display' : 'str' }, 652 'if': 'CONFIG_VNC' } 653 654## 655# @query-vnc: 656# 657# Returns information about the current VNC server 658# 659# Returns: @VncInfo 660# 661# Since: 0.14 662# 663# .. qmp-example:: 664# 665# -> { "execute": "query-vnc" } 666# <- { "return": { 667# "enabled":true, 668# "host":"0.0.0.0", 669# "service":"50402", 670# "auth":"vnc", 671# "family":"ipv4", 672# "clients":[ 673# { 674# "host":"127.0.0.1", 675# "service":"50401", 676# "family":"ipv4", 677# "websocket":false 678# } 679# ] 680# } 681# } 682## 683{ 'command': 'query-vnc', 'returns': 'VncInfo', 684 'if': 'CONFIG_VNC' } 685## 686# @query-vnc-servers: 687# 688# Returns a list of vnc servers. The list can be empty. 689# 690# Returns: a list of @VncInfo2 691# 692# Since: 2.3 693## 694{ 'command': 'query-vnc-servers', 'returns': ['VncInfo2'], 695 'if': 'CONFIG_VNC' } 696 697## 698# @change-vnc-password: 699# 700# Change the VNC server password. 701# 702# @password: the new password to use with VNC authentication 703# 704# Since: 1.1 705# 706# .. note:: An empty password in this command will set the password to 707# the empty string. Existing clients are unaffected by executing 708# this command. 709## 710{ 'command': 'change-vnc-password', 711 'data': { 'password': 'str' }, 712 'if': 'CONFIG_VNC' } 713 714## 715# @VNC_CONNECTED: 716# 717# Emitted when a VNC client establishes a connection 718# 719# @server: server information 720# 721# @client: client information 722# 723# .. note:: This event is emitted before any authentication takes 724# place, thus the authentication ID is not provided. 725# 726# Since: 0.13 727# 728# .. qmp-example:: 729# 730# <- { "event": "VNC_CONNECTED", 731# "data": { 732# "server": { "auth": "sasl", "family": "ipv4", "websocket": false, 733# "service": "5901", "host": "0.0.0.0" }, 734# "client": { "family": "ipv4", "service": "58425", 735# "host": "127.0.0.1", "websocket": false } }, 736# "timestamp": { "seconds": 1262976601, "microseconds": 975795 } } 737## 738{ 'event': 'VNC_CONNECTED', 739 'data': { 'server': 'VncServerInfo', 740 'client': 'VncBasicInfo' }, 741 'if': 'CONFIG_VNC' } 742 743## 744# @VNC_INITIALIZED: 745# 746# Emitted after authentication takes place (if any) and the VNC 747# session is made active 748# 749# @server: server information 750# 751# @client: client information 752# 753# Since: 0.13 754# 755# .. qmp-example:: 756# 757# <- { "event": "VNC_INITIALIZED", 758# "data": { 759# "server": { "auth": "sasl", "family": "ipv4", "websocket": false, 760# "service": "5901", "host": "0.0.0.0"}, 761# "client": { "family": "ipv4", "service": "46089", "websocket": false, 762# "host": "127.0.0.1", "sasl_username": "luiz" } }, 763# "timestamp": { "seconds": 1263475302, "microseconds": 150772 } } 764## 765{ 'event': 'VNC_INITIALIZED', 766 'data': { 'server': 'VncServerInfo', 767 'client': 'VncClientInfo' }, 768 'if': 'CONFIG_VNC' } 769 770## 771# @VNC_DISCONNECTED: 772# 773# Emitted when the connection is closed 774# 775# @server: server information 776# 777# @client: client information 778# 779# Since: 0.13 780# 781# .. qmp-example:: 782# 783# <- { "event": "VNC_DISCONNECTED", 784# "data": { 785# "server": { "auth": "sasl", "family": "ipv4", "websocket": false, 786# "service": "5901", "host": "0.0.0.0" }, 787# "client": { "family": "ipv4", "service": "58425", "websocket": false, 788# "host": "127.0.0.1", "sasl_username": "luiz" } }, 789# "timestamp": { "seconds": 1262976601, "microseconds": 975795 } } 790## 791{ 'event': 'VNC_DISCONNECTED', 792 'data': { 'server': 'VncServerInfo', 793 'client': 'VncClientInfo' }, 794 'if': 'CONFIG_VNC' } 795 796## 797# = Input 798## 799 800## 801# @MouseInfo: 802# 803# Information about a mouse device. 804# 805# @name: the name of the mouse device 806# 807# @index: the index of the mouse device 808# 809# @current: true if this device is currently receiving mouse events 810# 811# @absolute: true if this device supports absolute coordinates as 812# input 813# 814# Since: 0.14 815## 816{ 'struct': 'MouseInfo', 817 'data': {'name': 'str', 'index': 'int', 'current': 'bool', 818 'absolute': 'bool'} } 819 820## 821# @query-mice: 822# 823# Returns information about each active mouse device 824# 825# Returns: a list of @MouseInfo for each device 826# 827# Since: 0.14 828# 829# .. qmp-example:: 830# 831# -> { "execute": "query-mice" } 832# <- { "return": [ 833# { 834# "name":"QEMU Microsoft Mouse", 835# "index":0, 836# "current":false, 837# "absolute":false 838# }, 839# { 840# "name":"QEMU PS/2 Mouse", 841# "index":1, 842# "current":true, 843# "absolute":true 844# } 845# ] 846# } 847## 848{ 'command': 'query-mice', 'returns': ['MouseInfo'] } 849 850## 851# @QKeyCode: 852# 853# An enumeration of key name. 854# 855# This is used by the @send-key command. 856# 857# @unmapped: since 2.0 858# 859# @pause: since 2.0 860# 861# @ro: since 2.4 862# 863# @kp_comma: since 2.4 864# 865# @kp_equals: since 2.6 866# 867# @power: since 2.6 868# 869# @hiragana: since 2.9 870# 871# @henkan: since 2.9 872# 873# @yen: since 2.9 874# 875# @sleep: since 2.10 876# 877# @wake: since 2.10 878# 879# @audionext: since 2.10 880# 881# @audioprev: since 2.10 882# 883# @audiostop: since 2.10 884# 885# @audioplay: since 2.10 886# 887# @audiomute: since 2.10 888# 889# @volumeup: since 2.10 890# 891# @volumedown: since 2.10 892# 893# @mediaselect: since 2.10 894# 895# @mail: since 2.10 896# 897# @calculator: since 2.10 898# 899# @computer: since 2.10 900# 901# @ac_home: since 2.10 902# 903# @ac_back: since 2.10 904# 905# @ac_forward: since 2.10 906# 907# @ac_refresh: since 2.10 908# 909# @ac_bookmarks: since 2.10 910# 911# @muhenkan: since 2.12 912# 913# @katakanahiragana: since 2.12 914# 915# @lang1: since 6.1 916# 917# @lang2: since 6.1 918# 919# @f13: since 8.0 920# 921# @f14: since 8.0 922# 923# @f15: since 8.0 924# 925# @f16: since 8.0 926# 927# @f17: since 8.0 928# 929# @f18: since 8.0 930# 931# @f19: since 8.0 932# 933# @f20: since 8.0 934# 935# @f21: since 8.0 936# 937# @f22: since 8.0 938# 939# @f23: since 8.0 940# 941# @f24: since 8.0 942# 943# 'sysrq' was mistakenly added to hack around the fact that the ps2 944# driver was not generating correct scancodes sequences when 945# 'alt+print' was pressed. This flaw is now fixed and the 'sysrq' key 946# serves no further purpose. Any further use of 'sysrq' will be 947# transparently changed to 'print', so they are effectively synonyms. 948# 949# Since: 1.3 950## 951{ 'enum': 'QKeyCode', 952 'data': [ 'unmapped', 953 'shift', 'shift_r', 'alt', 'alt_r', 'ctrl', 954 'ctrl_r', 'menu', 'esc', '1', '2', '3', '4', '5', '6', '7', '8', 955 '9', '0', 'minus', 'equal', 'backspace', 'tab', 'q', 'w', 'e', 956 'r', 't', 'y', 'u', 'i', 'o', 'p', 'bracket_left', 'bracket_right', 957 'ret', 'a', 's', 'd', 'f', 'g', 'h', 'j', 'k', 'l', 'semicolon', 958 'apostrophe', 'grave_accent', 'backslash', 'z', 'x', 'c', 'v', 'b', 959 'n', 'm', 'comma', 'dot', 'slash', 'asterisk', 'spc', 'caps_lock', 960 'f1', 'f2', 'f3', 'f4', 'f5', 'f6', 'f7', 'f8', 'f9', 'f10', 961 'num_lock', 'scroll_lock', 'kp_divide', 'kp_multiply', 962 'kp_subtract', 'kp_add', 'kp_enter', 'kp_decimal', 'sysrq', 'kp_0', 963 'kp_1', 'kp_2', 'kp_3', 'kp_4', 'kp_5', 'kp_6', 'kp_7', 'kp_8', 964 'kp_9', 'less', 'f11', 'f12', 'print', 'home', 'pgup', 'pgdn', 'end', 965 'left', 'up', 'down', 'right', 'insert', 'delete', 'stop', 'again', 966 'props', 'undo', 'front', 'copy', 'open', 'paste', 'find', 'cut', 967 'lf', 'help', 'meta_l', 'meta_r', 'compose', 'pause', 968 'ro', 'hiragana', 'henkan', 'yen', 'muhenkan', 'katakanahiragana', 969 'kp_comma', 'kp_equals', 'power', 'sleep', 'wake', 970 'audionext', 'audioprev', 'audiostop', 'audioplay', 'audiomute', 971 'volumeup', 'volumedown', 'mediaselect', 972 'mail', 'calculator', 'computer', 973 'ac_home', 'ac_back', 'ac_forward', 'ac_refresh', 'ac_bookmarks', 974 'lang1', 'lang2','f13','f14','f15','f16','f17','f18','f19','f20','f21','f22','f23','f24' ] } 975 976## 977# @KeyValueKind: 978# 979# Since: 1.3 980## 981{ 'enum': 'KeyValueKind', 982 'data': [ 'number', 'qcode' ] } 983 984## 985# @IntWrapper: 986# 987# @data: a numeric key code 988# 989# Since: 1.3 990## 991{ 'struct': 'IntWrapper', 992 'data': { 'data': 'int' } } 993 994## 995# @QKeyCodeWrapper: 996# 997# @data: An enumeration of key name 998# 999# Since: 1.3 1000## 1001{ 'struct': 'QKeyCodeWrapper', 1002 'data': { 'data': 'QKeyCode' } } 1003 1004## 1005# @KeyValue: 1006# 1007# Represents a keyboard key. 1008# 1009# @type: key encoding 1010# 1011# Since: 1.3 1012## 1013{ 'union': 'KeyValue', 1014 'base': { 'type': 'KeyValueKind' }, 1015 'discriminator': 'type', 1016 'data': { 1017 'number': 'IntWrapper', 1018 'qcode': 'QKeyCodeWrapper' } } 1019 1020## 1021# @send-key: 1022# 1023# Send keys to guest. 1024# 1025# @keys: An array of @KeyValue elements. All @KeyValues in this array 1026# are simultaneously sent to the guest. A @KeyValue.number value 1027# is sent directly to the guest, while @KeyValue.qcode must be a 1028# valid @QKeyCode value 1029# 1030# @hold-time: time to delay key up events, milliseconds. Defaults to 1031# 100 1032# 1033# Errors: 1034# - If key is unknown or redundant, GenericError 1035# 1036# Since: 1.3 1037# 1038# .. qmp-example:: 1039# 1040# -> { "execute": "send-key", 1041# "arguments": { "keys": [ { "type": "qcode", "data": "ctrl" }, 1042# { "type": "qcode", "data": "alt" }, 1043# { "type": "qcode", "data": "delete" } ] } } 1044# <- { "return": {} } 1045## 1046{ 'command': 'send-key', 1047 'data': { 'keys': ['KeyValue'], '*hold-time': 'int' } } 1048 1049## 1050# @InputButton: 1051# 1052# Button of a pointer input device (mouse, tablet). 1053# 1054# @side: front side button of a 5-button mouse (since 2.9) 1055# 1056# @extra: rear side button of a 5-button mouse (since 2.9) 1057# 1058# @touch: screen contact on a multi-touch device (since 8.1) 1059# 1060# Since: 2.0 1061## 1062{ 'enum' : 'InputButton', 1063 'data' : [ 'left', 'middle', 'right', 'wheel-up', 'wheel-down', 'side', 1064 'extra', 'wheel-left', 'wheel-right', 'touch' ] } 1065 1066## 1067# @InputAxis: 1068# 1069# Position axis of a pointer input device (mouse, tablet). 1070# 1071# Since: 2.0 1072## 1073{ 'enum' : 'InputAxis', 1074 'data' : [ 'x', 'y' ] } 1075 1076## 1077# @InputMultiTouchType: 1078# 1079# Type of a multi-touch event. 1080# 1081# @begin: A new touch event sequence has just started. 1082# 1083# @update: A touch event sequence has been updated. 1084# 1085# @end: A touch event sequence has finished. 1086# 1087# @cancel: A touch event sequence has been canceled. 1088# 1089# @data: Absolute position data. 1090# 1091# Since: 8.1 1092## 1093{ 'enum' : 'InputMultiTouchType', 1094 'data' : [ 'begin', 'update', 'end', 'cancel', 'data' ] } 1095 1096 1097## 1098# @InputKeyEvent: 1099# 1100# Keyboard input event. 1101# 1102# @key: Which key this event is for. 1103# 1104# @down: True for key-down and false for key-up events. 1105# 1106# Since: 2.0 1107## 1108{ 'struct' : 'InputKeyEvent', 1109 'data' : { 'key' : 'KeyValue', 1110 'down' : 'bool' } } 1111 1112## 1113# @InputBtnEvent: 1114# 1115# Pointer button input event. 1116# 1117# @button: Which button this event is for. 1118# 1119# @down: True for key-down and false for key-up events. 1120# 1121# Since: 2.0 1122## 1123{ 'struct' : 'InputBtnEvent', 1124 'data' : { 'button' : 'InputButton', 1125 'down' : 'bool' } } 1126 1127## 1128# @InputMoveEvent: 1129# 1130# Pointer motion input event. 1131# 1132# @axis: Which axis is referenced by @value. 1133# 1134# @value: Pointer position. For absolute coordinates the valid range 1135# is 0 -> 0x7ffff 1136# 1137# Since: 2.0 1138## 1139{ 'struct' : 'InputMoveEvent', 1140 'data' : { 'axis' : 'InputAxis', 1141 'value' : 'int' } } 1142 1143## 1144# @InputMultiTouchEvent: 1145# 1146# MultiTouch input event. 1147# 1148# @type: The type of multi-touch event. 1149# 1150# @slot: Which slot has generated the event. 1151# 1152# @tracking-id: ID to correlate this event with previously generated 1153# events. 1154# 1155# @axis: Which axis is referenced by @value. 1156# 1157# @value: Contact position. 1158# 1159# Since: 8.1 1160## 1161{ 'struct' : 'InputMultiTouchEvent', 1162 'data' : { 'type' : 'InputMultiTouchType', 1163 'slot' : 'int', 1164 'tracking-id': 'int', 1165 'axis' : 'InputAxis', 1166 'value' : 'int' } } 1167 1168## 1169# @InputEventKind: 1170# 1171# @key: a keyboard input event 1172# 1173# @btn: a pointer button input event 1174# 1175# @rel: a relative pointer motion input event 1176# 1177# @abs: an absolute pointer motion input event 1178# 1179# @mtt: a multi-touch input event 1180# 1181# Since: 2.0 1182## 1183{ 'enum': 'InputEventKind', 1184 'data': [ 'key', 'btn', 'rel', 'abs', 'mtt' ] } 1185 1186## 1187# @InputKeyEventWrapper: 1188# 1189# @data: Keyboard input event 1190# 1191# Since: 2.0 1192## 1193{ 'struct': 'InputKeyEventWrapper', 1194 'data': { 'data': 'InputKeyEvent' } } 1195 1196## 1197# @InputBtnEventWrapper: 1198# 1199# @data: Pointer button input event 1200# 1201# Since: 2.0 1202## 1203{ 'struct': 'InputBtnEventWrapper', 1204 'data': { 'data': 'InputBtnEvent' } } 1205 1206## 1207# @InputMoveEventWrapper: 1208# 1209# @data: Pointer motion input event 1210# 1211# Since: 2.0 1212## 1213{ 'struct': 'InputMoveEventWrapper', 1214 'data': { 'data': 'InputMoveEvent' } } 1215 1216## 1217# @InputMultiTouchEventWrapper: 1218# 1219# @data: MultiTouch input event 1220# 1221# Since: 8.1 1222## 1223{ 'struct': 'InputMultiTouchEventWrapper', 1224 'data': { 'data': 'InputMultiTouchEvent' } } 1225 1226## 1227# @InputEvent: 1228# 1229# Input event union. 1230# 1231# @type: the type of input event 1232# 1233# Since: 2.0 1234## 1235{ 'union' : 'InputEvent', 1236 'base': { 'type': 'InputEventKind' }, 1237 'discriminator': 'type', 1238 'data' : { 'key' : 'InputKeyEventWrapper', 1239 'btn' : 'InputBtnEventWrapper', 1240 'rel' : 'InputMoveEventWrapper', 1241 'abs' : 'InputMoveEventWrapper', 1242 'mtt' : 'InputMultiTouchEventWrapper' } } 1243 1244## 1245# @input-send-event: 1246# 1247# Send input event(s) to guest. 1248# 1249# The @device and @head parameters can be used to send the input event 1250# to specific input devices in case (a) multiple input devices of the 1251# same kind are added to the virtual machine and (b) you have 1252# configured input routing (see docs/multiseat.txt) for those input 1253# devices. The parameters work exactly like the device and head 1254# properties of input devices. If @device is missing, only devices 1255# that have no input routing config are admissible. If @device is 1256# specified, both input devices with and without input routing config 1257# are admissible, but devices with input routing config take 1258# precedence. 1259# 1260# @device: display device to send event(s) to. 1261# 1262# @head: head to send event(s) to, in case the display device supports 1263# multiple scanouts. 1264# 1265# @events: List of InputEvent union. 1266# 1267# Since: 2.6 1268# 1269# .. note:: The consoles are visible in the qom tree, under 1270# ``/backend/console[$index]``. They have a device link and head 1271# property, so it is possible to map which console belongs to which 1272# device and display. 1273# 1274# .. qmp-example:: 1275# :title: Press left mouse button 1276# 1277# -> { "execute": "input-send-event", 1278# "arguments": { "device": "video0", 1279# "events": [ { "type": "btn", 1280# "data" : { "down": true, "button": "left" } } ] } } 1281# <- { "return": {} } 1282# 1283# -> { "execute": "input-send-event", 1284# "arguments": { "device": "video0", 1285# "events": [ { "type": "btn", 1286# "data" : { "down": false, "button": "left" } } ] } } 1287# <- { "return": {} } 1288# 1289# .. qmp-example:: 1290# :title: Press ctrl-alt-del 1291# 1292# -> { "execute": "input-send-event", 1293# "arguments": { "events": [ 1294# { "type": "key", "data" : { "down": true, 1295# "key": {"type": "qcode", "data": "ctrl" } } }, 1296# { "type": "key", "data" : { "down": true, 1297# "key": {"type": "qcode", "data": "alt" } } }, 1298# { "type": "key", "data" : { "down": true, 1299# "key": {"type": "qcode", "data": "delete" } } } ] } } 1300# <- { "return": {} } 1301# 1302# .. qmp-example:: 1303# :title: Move mouse pointer to absolute coordinates 1304# 1305# -> { "execute": "input-send-event" , 1306# "arguments": { "events": [ 1307# { "type": "abs", "data" : { "axis": "x", "value" : 20000 } }, 1308# { "type": "abs", "data" : { "axis": "y", "value" : 400 } } ] } } 1309# <- { "return": {} } 1310## 1311{ 'command': 'input-send-event', 1312 'data': { '*device': 'str', 1313 '*head' : 'int', 1314 'events' : [ 'InputEvent' ] } } 1315 1316## 1317# @DisplayGTK: 1318# 1319# GTK display options. 1320# 1321# @grab-on-hover: Grab keyboard input on mouse hover. 1322# 1323# @zoom-to-fit: Zoom guest display to fit into the host window. When 1324# turned off the host window will be resized instead. In case the 1325# display device can notify the guest on window resizes 1326# (virtio-gpu) this will default to "on", assuming the guest will 1327# resize the display to match the window size then. Otherwise it 1328# defaults to "off". (Since 3.1) 1329# 1330# @show-tabs: Display the tab bar for switching between the various 1331# graphical interfaces (e.g. VGA and virtual console character 1332# devices) by default. (Since 7.1) 1333# 1334# @show-menubar: Display the main window menubar. Defaults to "on". 1335# (Since 8.0) 1336# 1337# Since: 2.12 1338## 1339{ 'struct' : 'DisplayGTK', 1340 'data' : { '*grab-on-hover' : 'bool', 1341 '*zoom-to-fit' : 'bool', 1342 '*show-tabs' : 'bool', 1343 '*show-menubar' : 'bool' } } 1344 1345## 1346# @DisplayEGLHeadless: 1347# 1348# EGL headless display options. 1349# 1350# @rendernode: Which DRM render node should be used. Default is the 1351# first available node on the host. 1352# 1353# Since: 3.1 1354## 1355{ 'struct' : 'DisplayEGLHeadless', 1356 'data' : { '*rendernode' : 'str' } } 1357 1358## 1359# @DisplayDBus: 1360# 1361# DBus display options. 1362# 1363# @addr: The D-Bus bus address (default to the session bus). 1364# 1365# @rendernode: Which DRM render node should be used. Default is the 1366# first available node on the host. 1367# 1368# @p2p: Whether to use peer-to-peer connections (accepted through 1369# @add_client). 1370# 1371# @audiodev: Use the specified DBus audiodev to export audio. 1372# 1373# Since: 7.0 1374## 1375{ 'struct' : 'DisplayDBus', 1376 'data' : { '*rendernode' : 'str', 1377 '*addr': 'str', 1378 '*p2p': 'bool', 1379 '*audiodev': 'str' } } 1380 1381## 1382# @DisplayGLMode: 1383# 1384# Display OpenGL mode. 1385# 1386# @off: Disable OpenGL (default). 1387# 1388# @on: Use OpenGL, pick context type automatically. Would better be 1389# named 'auto' but is called 'on' for backward compatibility with 1390# bool type. 1391# 1392# @core: Use OpenGL with Core (desktop) Context. 1393# 1394# @es: Use OpenGL with ES (embedded systems) Context. 1395# 1396# Since: 3.0 1397## 1398{ 'enum' : 'DisplayGLMode', 1399 'data' : [ 'off', 'on', 'core', 'es' ] } 1400 1401## 1402# @DisplayCurses: 1403# 1404# Curses display options. 1405# 1406# @charset: Font charset used by guest (default: CP437). 1407# 1408# Since: 4.0 1409## 1410{ 'struct' : 'DisplayCurses', 1411 'data' : { '*charset' : 'str' } } 1412 1413## 1414# @DisplayCocoa: 1415# 1416# Cocoa display options. 1417# 1418# @left-command-key: Enable/disable forwarding of left command key to 1419# guest. Allows command-tab window switching on the host without 1420# sending this key to the guest when "off". Defaults to "on" 1421# 1422# @full-grab: Capture all key presses, including system combos. This 1423# requires accessibility permissions, since it performs a global 1424# grab on key events. (default: off) See 1425# https://support.apple.com/en-in/guide/mac-help/mh32356/mac 1426# 1427# @swap-opt-cmd: Swap the Option and Command keys so that their key 1428# codes match their position on non-Mac keyboards and you can use 1429# Meta/Super and Alt where you expect them. (default: off) 1430# 1431# @zoom-to-fit: Zoom guest display to fit into the host window. When 1432# turned off the host window will be resized instead. Defaults to 1433# "off". (Since 8.2) 1434# 1435# @zoom-interpolation: Apply interpolation to smooth output when 1436# zoom-to-fit is enabled. Defaults to "off". (Since 9.0) 1437# 1438# Since: 7.0 1439## 1440{ 'struct': 'DisplayCocoa', 1441 'data': { 1442 '*left-command-key': 'bool', 1443 '*full-grab': 'bool', 1444 '*swap-opt-cmd': 'bool', 1445 '*zoom-to-fit': 'bool', 1446 '*zoom-interpolation': 'bool' 1447 } } 1448 1449## 1450# @HotKeyMod: 1451# 1452# Set of modifier keys that need to be held for shortcut key actions. 1453# 1454# Since: 7.1 1455## 1456{ 'enum' : 'HotKeyMod', 1457 'data' : [ 'lctrl-lalt', 'lshift-lctrl-lalt', 'rctrl' ] } 1458 1459## 1460# @DisplaySDL: 1461# 1462# SDL2 display options. 1463# 1464# @grab-mod: Modifier keys that should be pressed together with the 1465# "G" key to release the mouse grab. 1466# 1467# Since: 7.1 1468## 1469{ 'struct' : 'DisplaySDL', 1470 'data' : { '*grab-mod' : 'HotKeyMod' } } 1471 1472## 1473# @DisplayType: 1474# 1475# Display (user interface) type. 1476# 1477# @default: The default user interface, selecting from the first 1478# available of gtk, sdl, cocoa, and vnc. 1479# 1480# @none: No user interface or video output display. The guest will 1481# still see an emulated graphics card, but its output will not be 1482# displayed to the QEMU user. 1483# 1484# @gtk: The GTK user interface. 1485# 1486# @sdl: The SDL user interface. 1487# 1488# @egl-headless: No user interface, offload GL operations to a local 1489# DRI device. Graphical display need to be paired with VNC or 1490# Spice. (Since 3.1) 1491# 1492# @curses: Display video output via curses. For graphics device 1493# models which support a text mode, QEMU can display this output 1494# using a curses/ncurses interface. Nothing is displayed when the 1495# graphics device is in graphical mode or if the graphics device 1496# does not support a text mode. Generally only the VGA device 1497# models support text mode. 1498# 1499# @cocoa: The Cocoa user interface. 1500# 1501# @spice-app: Set up a Spice server and run the default associated 1502# application to connect to it. The server will redirect the 1503# serial console and QEMU monitors. (Since 4.0) 1504# 1505# @dbus: Start a D-Bus service for the display. (Since 7.0) 1506# 1507# Since: 2.12 1508## 1509{ 'enum' : 'DisplayType', 1510 'data' : [ 1511 { 'name': 'default' }, 1512 { 'name': 'none' }, 1513 { 'name': 'gtk', 'if': 'CONFIG_GTK' }, 1514 { 'name': 'sdl', 'if': 'CONFIG_SDL' }, 1515 { 'name': 'egl-headless', 'if': 'CONFIG_OPENGL' }, 1516 { 'name': 'curses', 'if': 'CONFIG_CURSES' }, 1517 { 'name': 'cocoa', 'if': 'CONFIG_COCOA' }, 1518 { 'name': 'spice-app', 'if': 'CONFIG_SPICE' }, 1519 { 'name': 'dbus', 'if': 'CONFIG_DBUS_DISPLAY' } 1520 ] 1521} 1522 1523## 1524# @DisplayOptions: 1525# 1526# Display (user interface) options. 1527# 1528# @type: Which DisplayType qemu should use. 1529# 1530# @full-screen: Start user interface in fullscreen mode 1531# (default: off). 1532# 1533# @window-close: Allow to quit qemu with window close button 1534# (default: on). 1535# 1536# @show-cursor: Force showing the mouse cursor (default: off). 1537# (since: 5.0) 1538# 1539# @gl: Enable OpenGL support (default: off). 1540# 1541# Since: 2.12 1542## 1543{ 'union' : 'DisplayOptions', 1544 'base' : { 'type' : 'DisplayType', 1545 '*full-screen' : 'bool', 1546 '*window-close' : 'bool', 1547 '*show-cursor' : 'bool', 1548 '*gl' : 'DisplayGLMode' }, 1549 'discriminator' : 'type', 1550 'data' : { 1551 'gtk': { 'type': 'DisplayGTK', 'if': 'CONFIG_GTK' }, 1552 'cocoa': { 'type': 'DisplayCocoa', 'if': 'CONFIG_COCOA' }, 1553 'curses': { 'type': 'DisplayCurses', 'if': 'CONFIG_CURSES' }, 1554 'egl-headless': { 'type': 'DisplayEGLHeadless', 1555 'if': 'CONFIG_OPENGL' }, 1556 'dbus': { 'type': 'DisplayDBus', 'if': 'CONFIG_DBUS_DISPLAY' }, 1557 'sdl': { 'type': 'DisplaySDL', 'if': 'CONFIG_SDL' } 1558 } 1559} 1560 1561## 1562# @query-display-options: 1563# 1564# Returns information about display configuration 1565# 1566# Returns: @DisplayOptions 1567# 1568# Since: 3.1 1569## 1570{ 'command': 'query-display-options', 1571 'returns': 'DisplayOptions' } 1572 1573## 1574# @DisplayReloadType: 1575# 1576# Available DisplayReload types. 1577# 1578# @vnc: VNC display 1579# 1580# Since: 6.0 1581## 1582{ 'enum': 'DisplayReloadType', 1583 'data': ['vnc'] } 1584 1585## 1586# @DisplayReloadOptionsVNC: 1587# 1588# Specify the VNC reload options. 1589# 1590# @tls-certs: reload tls certs or not. 1591# 1592# Since: 6.0 1593## 1594{ 'struct': 'DisplayReloadOptionsVNC', 1595 'data': { '*tls-certs': 'bool' } } 1596 1597## 1598# @DisplayReloadOptions: 1599# 1600# Options of the display configuration reload. 1601# 1602# @type: Specify the display type. 1603# 1604# Since: 6.0 1605## 1606{ 'union': 'DisplayReloadOptions', 1607 'base': {'type': 'DisplayReloadType'}, 1608 'discriminator': 'type', 1609 'data': { 'vnc': 'DisplayReloadOptionsVNC' } } 1610 1611## 1612# @display-reload: 1613# 1614# Reload display configuration. 1615# 1616# Since: 6.0 1617# 1618# .. qmp-example:: 1619# 1620# -> { "execute": "display-reload", 1621# "arguments": { "type": "vnc", "tls-certs": true } } 1622# <- { "return": {} } 1623## 1624{ 'command': 'display-reload', 1625 'data': 'DisplayReloadOptions', 1626 'boxed' : true } 1627 1628## 1629# @DisplayUpdateType: 1630# 1631# Available DisplayUpdate types. 1632# 1633# @vnc: VNC display 1634# 1635# Since: 7.1 1636## 1637{ 'enum': 'DisplayUpdateType', 1638 'data': ['vnc'] } 1639 1640## 1641# @DisplayUpdateOptionsVNC: 1642# 1643# Specify the VNC reload options. 1644# 1645# @addresses: If specified, change set of addresses to listen for 1646# connections. Addresses configured for websockets are not 1647# touched. 1648# 1649# Since: 7.1 1650## 1651{ 'struct': 'DisplayUpdateOptionsVNC', 1652 'data': { '*addresses': ['SocketAddress'] } } 1653 1654## 1655# @DisplayUpdateOptions: 1656# 1657# Options of the display configuration reload. 1658# 1659# @type: Specify the display type. 1660# 1661# Since: 7.1 1662## 1663{ 'union': 'DisplayUpdateOptions', 1664 'base': {'type': 'DisplayUpdateType'}, 1665 'discriminator': 'type', 1666 'data': { 'vnc': 'DisplayUpdateOptionsVNC' } } 1667 1668## 1669# @display-update: 1670# 1671# Update display configuration. 1672# 1673# Since: 7.1 1674# 1675# .. qmp-example:: 1676# 1677# -> { "execute": "display-update", 1678# "arguments": { "type": "vnc", "addresses": 1679# [ { "type": "inet", "host": "0.0.0.0", 1680# "port": "5901" } ] } } 1681# <- { "return": {} } 1682## 1683{ 'command': 'display-update', 1684 'data': 'DisplayUpdateOptions', 1685 'boxed' : true } 1686 1687## 1688# @client_migrate_info: 1689# 1690# Set migration information for remote display. This makes the server 1691# ask the client to automatically reconnect using the new parameters 1692# once migration finished successfully. Only implemented for SPICE. 1693# 1694# @protocol: must be "spice" 1695# 1696# @hostname: migration target hostname 1697# 1698# @port: spice tcp port for plaintext channels 1699# 1700# @tls-port: spice tcp port for tls-secured channels 1701# 1702# @cert-subject: server certificate subject 1703# 1704# Since: 0.14 1705# 1706# .. qmp-example:: 1707# 1708# -> { "execute": "client_migrate_info", 1709# "arguments": { "protocol": "spice", 1710# "hostname": "virt42.lab.kraxel.org", 1711# "port": 1234 } } 1712# <- { "return": {} } 1713## 1714{ 'command': 'client_migrate_info', 1715 'data': { 'protocol': 'str', 'hostname': 'str', '*port': 'int', 1716 '*tls-port': 'int', '*cert-subject': 'str' } } 1717