1# -*- Mode: Python -*- 2# 3 4## 5# = Remote desktop 6## 7 8{ 'include': 'sockets.json' } 9 10## 11# @set_password: 12# 13# Sets the password of a remote display session. 14# 15# @protocol: `vnc' to modify the VNC server password 16# `spice' to modify the Spice server password 17# 18# @password: the new password 19# 20# @connected: how to handle existing clients when changing the 21# password. If nothing is specified, defaults to `keep' 22# `fail' to fail the command if clients are connected 23# `disconnect' to disconnect existing clients 24# `keep' to maintain existing clients 25# 26# Returns: Nothing on success 27# If Spice is not enabled, DeviceNotFound 28# 29# Since: 0.14.0 30# 31# Example: 32# 33# -> { "execute": "set_password", "arguments": { "protocol": "vnc", 34# "password": "secret" } } 35# <- { "return": {} } 36# 37## 38{ 'command': 'set_password', 39 'data': {'protocol': 'str', 'password': 'str', '*connected': 'str'} } 40 41## 42# @expire_password: 43# 44# Expire the password of a remote display server. 45# 46# @protocol: the name of the remote display protocol `vnc' or `spice' 47# 48# @time: when to expire the password. 49# `now' to expire the password immediately 50# `never' to cancel password expiration 51# `+INT' where INT is the number of seconds from now (integer) 52# `INT' where INT is the absolute time in seconds 53# 54# Returns: Nothing on success 55# If @protocol is `spice' and Spice is not active, DeviceNotFound 56# 57# Since: 0.14.0 58# 59# Notes: Time is relative to the server and currently there is no way to 60# coordinate server time with client time. It is not recommended to 61# use the absolute time version of the @time parameter unless you're 62# sure you are on the same machine as the QEMU instance. 63# 64# Example: 65# 66# -> { "execute": "expire_password", "arguments": { "protocol": "vnc", 67# "time": "+60" } } 68# <- { "return": {} } 69# 70## 71{ 'command': 'expire_password', 'data': {'protocol': 'str', 'time': 'str'} } 72 73## 74# @screendump: 75# 76# Write a PPM of the VGA screen to a file. 77# 78# @filename: the path of a new PPM file to store the image 79# 80# Returns: Nothing on success 81# 82# Since: 0.14.0 83# 84# Example: 85# 86# -> { "execute": "screendump", 87# "arguments": { "filename": "/tmp/image" } } 88# <- { "return": {} } 89# 90## 91{ 'command': 'screendump', 'data': {'filename': 'str'} } 92 93## 94# == Spice 95## 96 97## 98# @SpiceBasicInfo: 99# 100# The basic information for SPICE network connection 101# 102# @host: IP address 103# 104# @port: port number 105# 106# @family: address family 107# 108# Since: 2.1 109## 110{ 'struct': 'SpiceBasicInfo', 111 'data': { 'host': 'str', 112 'port': 'str', 113 'family': 'NetworkAddressFamily' } } 114 115## 116# @SpiceServerInfo: 117# 118# Information about a SPICE server 119# 120# @auth: authentication method 121# 122# Since: 2.1 123## 124{ 'struct': 'SpiceServerInfo', 125 'base': 'SpiceBasicInfo', 126 'data': { '*auth': 'str' } } 127 128## 129# @SpiceChannel: 130# 131# Information about a SPICE client channel. 132# 133# @connection-id: SPICE connection id number. All channels with the same id 134# belong to the same SPICE session. 135# 136# @channel-type: SPICE channel type number. "1" is the main control 137# channel, filter for this one if you want to track spice 138# sessions only 139# 140# @channel-id: SPICE channel ID number. Usually "0", might be different when 141# multiple channels of the same type exist, such as multiple 142# display channels in a multihead setup 143# 144# @tls: true if the channel is encrypted, false otherwise. 145# 146# Since: 0.14.0 147## 148{ 'struct': 'SpiceChannel', 149 'base': 'SpiceBasicInfo', 150 'data': {'connection-id': 'int', 'channel-type': 'int', 'channel-id': 'int', 151 'tls': 'bool'} } 152 153## 154# @SpiceQueryMouseMode: 155# 156# An enumeration of Spice mouse states. 157# 158# @client: Mouse cursor position is determined by the client. 159# 160# @server: Mouse cursor position is determined by the server. 161# 162# @unknown: No information is available about mouse mode used by 163# the spice server. 164# 165# Note: spice/enums.h has a SpiceMouseMode already, hence the name. 166# 167# Since: 1.1 168## 169{ 'enum': 'SpiceQueryMouseMode', 170 'data': [ 'client', 'server', 'unknown' ] } 171 172## 173# @SpiceInfo: 174# 175# Information about the SPICE session. 176# 177# @enabled: true if the SPICE server is enabled, false otherwise 178# 179# @migrated: true if the last guest migration completed and spice 180# migration had completed as well. false otherwise. (since 1.4) 181# 182# @host: The hostname the SPICE server is bound to. This depends on 183# the name resolution on the host and may be an IP address. 184# 185# @port: The SPICE server's port number. 186# 187# @compiled-version: SPICE server version. 188# 189# @tls-port: The SPICE server's TLS port number. 190# 191# @auth: the current authentication type used by the server 192# 'none' if no authentication is being used 193# 'spice' uses SASL or direct TLS authentication, depending on command 194# line options 195# 196# @mouse-mode: The mode in which the mouse cursor is displayed currently. Can 197# be determined by the client or the server, or unknown if spice 198# server doesn't provide this information. (since: 1.1) 199# 200# @channels: a list of @SpiceChannel for each active spice channel 201# 202# Since: 0.14.0 203## 204{ 'struct': 'SpiceInfo', 205 'data': {'enabled': 'bool', 'migrated': 'bool', '*host': 'str', '*port': 'int', 206 '*tls-port': 'int', '*auth': 'str', '*compiled-version': 'str', 207 'mouse-mode': 'SpiceQueryMouseMode', '*channels': ['SpiceChannel']} } 208 209## 210# @query-spice: 211# 212# Returns information about the current SPICE server 213# 214# Returns: @SpiceInfo 215# 216# Since: 0.14.0 217# 218# Example: 219# 220# -> { "execute": "query-spice" } 221# <- { "return": { 222# "enabled": true, 223# "auth": "spice", 224# "port": 5920, 225# "tls-port": 5921, 226# "host": "0.0.0.0", 227# "channels": [ 228# { 229# "port": "54924", 230# "family": "ipv4", 231# "channel-type": 1, 232# "connection-id": 1804289383, 233# "host": "127.0.0.1", 234# "channel-id": 0, 235# "tls": true 236# }, 237# { 238# "port": "36710", 239# "family": "ipv4", 240# "channel-type": 4, 241# "connection-id": 1804289383, 242# "host": "127.0.0.1", 243# "channel-id": 0, 244# "tls": false 245# }, 246# [ ... more channels follow ... ] 247# ] 248# } 249# } 250# 251## 252{ 'command': 'query-spice', 'returns': 'SpiceInfo' } 253 254## 255# @SPICE_CONNECTED: 256# 257# Emitted when a SPICE client establishes a connection 258# 259# @server: server information 260# 261# @client: client information 262# 263# Since: 0.14.0 264# 265# Example: 266# 267# <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707}, 268# "event": "SPICE_CONNECTED", 269# "data": { 270# "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"}, 271# "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"} 272# }} 273# 274## 275{ 'event': 'SPICE_CONNECTED', 276 'data': { 'server': 'SpiceBasicInfo', 277 'client': 'SpiceBasicInfo' } } 278 279## 280# @SPICE_INITIALIZED: 281# 282# Emitted after initial handshake and authentication takes place (if any) 283# and the SPICE channel is up and running 284# 285# @server: server information 286# 287# @client: client information 288# 289# Since: 0.14.0 290# 291# Example: 292# 293# <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172}, 294# "event": "SPICE_INITIALIZED", 295# "data": {"server": {"auth": "spice", "port": "5921", 296# "family": "ipv4", "host": "127.0.0.1"}, 297# "client": {"port": "49004", "family": "ipv4", "channel-type": 3, 298# "connection-id": 1804289383, "host": "127.0.0.1", 299# "channel-id": 0, "tls": true} 300# }} 301# 302## 303{ 'event': 'SPICE_INITIALIZED', 304 'data': { 'server': 'SpiceServerInfo', 305 'client': 'SpiceChannel' } } 306 307## 308# @SPICE_DISCONNECTED: 309# 310# Emitted when the SPICE connection is closed 311# 312# @server: server information 313# 314# @client: client information 315# 316# Since: 0.14.0 317# 318# Example: 319# 320# <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707}, 321# "event": "SPICE_DISCONNECTED", 322# "data": { 323# "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"}, 324# "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"} 325# }} 326# 327## 328{ 'event': 'SPICE_DISCONNECTED', 329 'data': { 'server': 'SpiceBasicInfo', 330 'client': 'SpiceBasicInfo' } } 331 332## 333# @SPICE_MIGRATE_COMPLETED: 334# 335# Emitted when SPICE migration has completed 336# 337# Since: 1.3 338# 339# Example: 340# 341# <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172}, 342# "event": "SPICE_MIGRATE_COMPLETED" } 343# 344## 345{ 'event': 'SPICE_MIGRATE_COMPLETED' } 346 347## 348# == VNC 349## 350 351## 352# @VncBasicInfo: 353# 354# The basic information for vnc network connection 355# 356# @host: IP address 357# 358# @service: The service name of the vnc port. This may depend on the host 359# system's service database so symbolic names should not be relied 360# on. 361# 362# @family: address family 363# 364# @websocket: true in case the socket is a websocket (since 2.3). 365# 366# Since: 2.1 367## 368{ 'struct': 'VncBasicInfo', 369 'data': { 'host': 'str', 370 'service': 'str', 371 'family': 'NetworkAddressFamily', 372 'websocket': 'bool' } } 373 374## 375# @VncServerInfo: 376# 377# The network connection information for server 378# 379# @auth: authentication method used for 380# the plain (non-websocket) VNC server 381# 382# Since: 2.1 383## 384{ 'struct': 'VncServerInfo', 385 'base': 'VncBasicInfo', 386 'data': { '*auth': 'str' } } 387 388## 389# @VncClientInfo: 390# 391# Information about a connected VNC client. 392# 393# @x509_dname: If x509 authentication is in use, the Distinguished 394# Name of the client. 395# 396# @sasl_username: If SASL authentication is in use, the SASL username 397# used for authentication. 398# 399# Since: 0.14.0 400## 401{ 'struct': 'VncClientInfo', 402 'base': 'VncBasicInfo', 403 'data': { '*x509_dname': 'str', '*sasl_username': 'str' } } 404 405## 406# @VncInfo: 407# 408# Information about the VNC session. 409# 410# @enabled: true if the VNC server is enabled, false otherwise 411# 412# @host: The hostname the VNC server is bound to. This depends on 413# the name resolution on the host and may be an IP address. 414# 415# @family: 'ipv6' if the host is listening for IPv6 connections 416# 'ipv4' if the host is listening for IPv4 connections 417# 'unix' if the host is listening on a unix domain socket 418# 'unknown' otherwise 419# 420# @service: The service name of the server's port. This may depends 421# on the host system's service database so symbolic names should not 422# be relied on. 423# 424# @auth: the current authentication type used by the server 425# 'none' if no authentication is being used 426# 'vnc' if VNC authentication is being used 427# 'vencrypt+plain' if VEncrypt is used with plain text authentication 428# 'vencrypt+tls+none' if VEncrypt is used with TLS and no authentication 429# 'vencrypt+tls+vnc' if VEncrypt is used with TLS and VNC authentication 430# 'vencrypt+tls+plain' if VEncrypt is used with TLS and plain text auth 431# 'vencrypt+x509+none' if VEncrypt is used with x509 and no auth 432# 'vencrypt+x509+vnc' if VEncrypt is used with x509 and VNC auth 433# 'vencrypt+x509+plain' if VEncrypt is used with x509 and plain text auth 434# 'vencrypt+tls+sasl' if VEncrypt is used with TLS and SASL auth 435# 'vencrypt+x509+sasl' if VEncrypt is used with x509 and SASL auth 436# 437# @clients: a list of @VncClientInfo of all currently connected clients 438# 439# Since: 0.14.0 440## 441{ 'struct': 'VncInfo', 442 'data': {'enabled': 'bool', '*host': 'str', 443 '*family': 'NetworkAddressFamily', 444 '*service': 'str', '*auth': 'str', '*clients': ['VncClientInfo']} } 445 446## 447# @VncPrimaryAuth: 448# 449# vnc primary authentication method. 450# 451# Since: 2.3 452## 453{ 'enum': 'VncPrimaryAuth', 454 'data': [ 'none', 'vnc', 'ra2', 'ra2ne', 'tight', 'ultra', 455 'tls', 'vencrypt', 'sasl' ] } 456 457## 458# @VncVencryptSubAuth: 459# 460# vnc sub authentication method with vencrypt. 461# 462# Since: 2.3 463## 464{ 'enum': 'VncVencryptSubAuth', 465 'data': [ 'plain', 466 'tls-none', 'x509-none', 467 'tls-vnc', 'x509-vnc', 468 'tls-plain', 'x509-plain', 469 'tls-sasl', 'x509-sasl' ] } 470 471 472## 473# @VncServerInfo2: 474# 475# The network connection information for server 476# 477# @auth: The current authentication type used by the servers 478# 479# @vencrypt: The vencrypt sub authentication type used by the 480# servers, only specified in case auth == vencrypt. 481# 482# Since: 2.9 483## 484{ 'struct': 'VncServerInfo2', 485 'base': 'VncBasicInfo', 486 'data': { 'auth' : 'VncPrimaryAuth', 487 '*vencrypt' : 'VncVencryptSubAuth' } } 488 489 490## 491# @VncInfo2: 492# 493# Information about a vnc server 494# 495# @id: vnc server name. 496# 497# @server: A list of @VncBasincInfo describing all listening sockets. 498# The list can be empty (in case the vnc server is disabled). 499# It also may have multiple entries: normal + websocket, 500# possibly also ipv4 + ipv6 in the future. 501# 502# @clients: A list of @VncClientInfo of all currently connected clients. 503# The list can be empty, for obvious reasons. 504# 505# @auth: The current authentication type used by the non-websockets servers 506# 507# @vencrypt: The vencrypt authentication type used by the servers, 508# only specified in case auth == vencrypt. 509# 510# @display: The display device the vnc server is linked to. 511# 512# Since: 2.3 513## 514{ 'struct': 'VncInfo2', 515 'data': { 'id' : 'str', 516 'server' : ['VncServerInfo2'], 517 'clients' : ['VncClientInfo'], 518 'auth' : 'VncPrimaryAuth', 519 '*vencrypt' : 'VncVencryptSubAuth', 520 '*display' : 'str' } } 521 522## 523# @query-vnc: 524# 525# Returns information about the current VNC server 526# 527# Returns: @VncInfo 528# 529# Since: 0.14.0 530# 531# Example: 532# 533# -> { "execute": "query-vnc" } 534# <- { "return": { 535# "enabled":true, 536# "host":"0.0.0.0", 537# "service":"50402", 538# "auth":"vnc", 539# "family":"ipv4", 540# "clients":[ 541# { 542# "host":"127.0.0.1", 543# "service":"50401", 544# "family":"ipv4" 545# } 546# ] 547# } 548# } 549# 550## 551{ 'command': 'query-vnc', 'returns': 'VncInfo' } 552 553## 554# @query-vnc-servers: 555# 556# Returns a list of vnc servers. The list can be empty. 557# 558# Returns: a list of @VncInfo2 559# 560# Since: 2.3 561## 562{ 'command': 'query-vnc-servers', 'returns': ['VncInfo2'] } 563 564## 565# @change-vnc-password: 566# 567# Change the VNC server password. 568# 569# @password: the new password to use with VNC authentication 570# 571# Since: 1.1 572# 573# Notes: An empty password in this command will set the password to the empty 574# string. Existing clients are unaffected by executing this command. 575## 576{ 'command': 'change-vnc-password', 'data': {'password': 'str'} } 577 578## 579# @VNC_CONNECTED: 580# 581# Emitted when a VNC client establishes a connection 582# 583# @server: server information 584# 585# @client: client information 586# 587# Note: This event is emitted before any authentication takes place, thus 588# the authentication ID is not provided 589# 590# Since: 0.13.0 591# 592# Example: 593# 594# <- { "event": "VNC_CONNECTED", 595# "data": { 596# "server": { "auth": "sasl", "family": "ipv4", 597# "service": "5901", "host": "0.0.0.0" }, 598# "client": { "family": "ipv4", "service": "58425", 599# "host": "127.0.0.1" } }, 600# "timestamp": { "seconds": 1262976601, "microseconds": 975795 } } 601# 602## 603{ 'event': 'VNC_CONNECTED', 604 'data': { 'server': 'VncServerInfo', 605 'client': 'VncBasicInfo' } } 606 607## 608# @VNC_INITIALIZED: 609# 610# Emitted after authentication takes place (if any) and the VNC session is 611# made active 612# 613# @server: server information 614# 615# @client: client information 616# 617# Since: 0.13.0 618# 619# Example: 620# 621# <- { "event": "VNC_INITIALIZED", 622# "data": { 623# "server": { "auth": "sasl", "family": "ipv4", 624# "service": "5901", "host": "0.0.0.0"}, 625# "client": { "family": "ipv4", "service": "46089", 626# "host": "127.0.0.1", "sasl_username": "luiz" } }, 627# "timestamp": { "seconds": 1263475302, "microseconds": 150772 } } 628# 629## 630{ 'event': 'VNC_INITIALIZED', 631 'data': { 'server': 'VncServerInfo', 632 'client': 'VncClientInfo' } } 633 634## 635# @VNC_DISCONNECTED: 636# 637# Emitted when the connection is closed 638# 639# @server: server information 640# 641# @client: client information 642# 643# Since: 0.13.0 644# 645# Example: 646# 647# <- { "event": "VNC_DISCONNECTED", 648# "data": { 649# "server": { "auth": "sasl", "family": "ipv4", 650# "service": "5901", "host": "0.0.0.0" }, 651# "client": { "family": "ipv4", "service": "58425", 652# "host": "127.0.0.1", "sasl_username": "luiz" } }, 653# "timestamp": { "seconds": 1262976601, "microseconds": 975795 } } 654# 655## 656{ 'event': 'VNC_DISCONNECTED', 657 'data': { 'server': 'VncServerInfo', 658 'client': 'VncClientInfo' } } 659 660## 661# = Input 662## 663 664## 665# @MouseInfo: 666# 667# Information about a mouse device. 668# 669# @name: the name of the mouse device 670# 671# @index: the index of the mouse device 672# 673# @current: true if this device is currently receiving mouse events 674# 675# @absolute: true if this device supports absolute coordinates as input 676# 677# Since: 0.14.0 678## 679{ 'struct': 'MouseInfo', 680 'data': {'name': 'str', 'index': 'int', 'current': 'bool', 681 'absolute': 'bool'} } 682 683## 684# @query-mice: 685# 686# Returns information about each active mouse device 687# 688# Returns: a list of @MouseInfo for each device 689# 690# Since: 0.14.0 691# 692# Example: 693# 694# -> { "execute": "query-mice" } 695# <- { "return": [ 696# { 697# "name":"QEMU Microsoft Mouse", 698# "index":0, 699# "current":false, 700# "absolute":false 701# }, 702# { 703# "name":"QEMU PS/2 Mouse", 704# "index":1, 705# "current":true, 706# "absolute":true 707# } 708# ] 709# } 710# 711## 712{ 'command': 'query-mice', 'returns': ['MouseInfo'] } 713 714## 715# @QKeyCode: 716# 717# An enumeration of key name. 718# 719# This is used by the @send-key command. 720# 721# @unmapped: since 2.0 722# @pause: since 2.0 723# @ro: since 2.4 724# @kp_comma: since 2.4 725# @kp_equals: since 2.6 726# @power: since 2.6 727# @hiragana: since 2.9 728# @henkan: since 2.9 729# @yen: since 2.9 730# 731# @sleep: since 2.10 732# @wake: since 2.10 733# @audionext: since 2.10 734# @audioprev: since 2.10 735# @audiostop: since 2.10 736# @audioplay: since 2.10 737# @audiomute: since 2.10 738# @volumeup: since 2.10 739# @volumedown: since 2.10 740# @mediaselect: since 2.10 741# @mail: since 2.10 742# @calculator: since 2.10 743# @computer: since 2.10 744# @ac_home: since 2.10 745# @ac_back: since 2.10 746# @ac_forward: since 2.10 747# @ac_refresh: since 2.10 748# @ac_bookmarks: since 2.10 749# altgr, altgr_r: dropped in 2.10 750# 751# Since: 1.3.0 752# 753## 754{ 'enum': 'QKeyCode', 755 'data': [ 'unmapped', 756 'shift', 'shift_r', 'alt', 'alt_r', 'ctrl', 757 'ctrl_r', 'menu', 'esc', '1', '2', '3', '4', '5', '6', '7', '8', 758 '9', '0', 'minus', 'equal', 'backspace', 'tab', 'q', 'w', 'e', 759 'r', 't', 'y', 'u', 'i', 'o', 'p', 'bracket_left', 'bracket_right', 760 'ret', 'a', 's', 'd', 'f', 'g', 'h', 'j', 'k', 'l', 'semicolon', 761 'apostrophe', 'grave_accent', 'backslash', 'z', 'x', 'c', 'v', 'b', 762 'n', 'm', 'comma', 'dot', 'slash', 'asterisk', 'spc', 'caps_lock', 763 'f1', 'f2', 'f3', 'f4', 'f5', 'f6', 'f7', 'f8', 'f9', 'f10', 764 'num_lock', 'scroll_lock', 'kp_divide', 'kp_multiply', 765 'kp_subtract', 'kp_add', 'kp_enter', 'kp_decimal', 'sysrq', 'kp_0', 766 'kp_1', 'kp_2', 'kp_3', 'kp_4', 'kp_5', 'kp_6', 'kp_7', 'kp_8', 767 'kp_9', 'less', 'f11', 'f12', 'print', 'home', 'pgup', 'pgdn', 'end', 768 'left', 'up', 'down', 'right', 'insert', 'delete', 'stop', 'again', 769 'props', 'undo', 'front', 'copy', 'open', 'paste', 'find', 'cut', 770 'lf', 'help', 'meta_l', 'meta_r', 'compose', 'pause', 771 'ro', 'hiragana', 'henkan', 'yen', 772 'kp_comma', 'kp_equals', 'power', 'sleep', 'wake', 773 'audionext', 'audioprev', 'audiostop', 'audioplay', 'audiomute', 774 'volumeup', 'volumedown', 'mediaselect', 775 'mail', 'calculator', 'computer', 776 'ac_home', 'ac_back', 'ac_forward', 'ac_refresh', 'ac_bookmarks' ] } 777 778## 779# @KeyValue: 780# 781# Represents a keyboard key. 782# 783# Since: 1.3.0 784## 785{ 'union': 'KeyValue', 786 'data': { 787 'number': 'int', 788 'qcode': 'QKeyCode' } } 789 790## 791# @send-key: 792# 793# Send keys to guest. 794# 795# @keys: An array of @KeyValue elements. All @KeyValues in this array are 796# simultaneously sent to the guest. A @KeyValue.number value is sent 797# directly to the guest, while @KeyValue.qcode must be a valid 798# @QKeyCode value 799# 800# @hold-time: time to delay key up events, milliseconds. Defaults 801# to 100 802# 803# Returns: Nothing on success 804# If key is unknown or redundant, InvalidParameter 805# 806# Since: 1.3.0 807# 808# Example: 809# 810# -> { "execute": "send-key", 811# "arguments": { "keys": [ { "type": "qcode", "data": "ctrl" }, 812# { "type": "qcode", "data": "alt" }, 813# { "type": "qcode", "data": "delete" } ] } } 814# <- { "return": {} } 815# 816## 817{ 'command': 'send-key', 818 'data': { 'keys': ['KeyValue'], '*hold-time': 'int' } } 819 820## 821# @InputButton: 822# 823# Button of a pointer input device (mouse, tablet). 824# 825# @side: front side button of a 5-button mouse (since 2.9) 826# 827# @extra: rear side button of a 5-button mouse (since 2.9) 828# 829# Since: 2.0 830## 831{ 'enum' : 'InputButton', 832 'data' : [ 'left', 'middle', 'right', 'wheel-up', 'wheel-down', 'side', 833 'extra' ] } 834 835## 836# @InputAxis: 837# 838# Position axis of a pointer input device (mouse, tablet). 839# 840# Since: 2.0 841## 842{ 'enum' : 'InputAxis', 843 'data' : [ 'x', 'y' ] } 844 845## 846# @InputKeyEvent: 847# 848# Keyboard input event. 849# 850# @key: Which key this event is for. 851# @down: True for key-down and false for key-up events. 852# 853# Since: 2.0 854## 855{ 'struct' : 'InputKeyEvent', 856 'data' : { 'key' : 'KeyValue', 857 'down' : 'bool' } } 858 859## 860# @InputBtnEvent: 861# 862# Pointer button input event. 863# 864# @button: Which button this event is for. 865# @down: True for key-down and false for key-up events. 866# 867# Since: 2.0 868## 869{ 'struct' : 'InputBtnEvent', 870 'data' : { 'button' : 'InputButton', 871 'down' : 'bool' } } 872 873## 874# @InputMoveEvent: 875# 876# Pointer motion input event. 877# 878# @axis: Which axis is referenced by @value. 879# @value: Pointer position. For absolute coordinates the 880# valid range is 0 -> 0x7ffff 881# 882# Since: 2.0 883## 884{ 'struct' : 'InputMoveEvent', 885 'data' : { 'axis' : 'InputAxis', 886 'value' : 'int' } } 887 888## 889# @InputEvent: 890# 891# Input event union. 892# 893# @type: the input type, one of: 894# - 'key': Input event of Keyboard 895# - 'btn': Input event of pointer buttons 896# - 'rel': Input event of relative pointer motion 897# - 'abs': Input event of absolute pointer motion 898# 899# Since: 2.0 900## 901{ 'union' : 'InputEvent', 902 'data' : { 'key' : 'InputKeyEvent', 903 'btn' : 'InputBtnEvent', 904 'rel' : 'InputMoveEvent', 905 'abs' : 'InputMoveEvent' } } 906 907## 908# @input-send-event: 909# 910# Send input event(s) to guest. 911# 912# @device: display device to send event(s) to. 913# @head: head to send event(s) to, in case the 914# display device supports multiple scanouts. 915# @events: List of InputEvent union. 916# 917# Returns: Nothing on success. 918# 919# The @device and @head parameters can be used to send the input event 920# to specific input devices in case (a) multiple input devices of the 921# same kind are added to the virtual machine and (b) you have 922# configured input routing (see docs/multiseat.txt) for those input 923# devices. The parameters work exactly like the device and head 924# properties of input devices. If @device is missing, only devices 925# that have no input routing config are admissible. If @device is 926# specified, both input devices with and without input routing config 927# are admissible, but devices with input routing config take 928# precedence. 929# 930# Since: 2.6 931# 932# Note: The consoles are visible in the qom tree, under 933# /backend/console[$index]. They have a device link and head property, 934# so it is possible to map which console belongs to which device and 935# display. 936# 937# Example: 938# 939# 1. Press left mouse button. 940# 941# -> { "execute": "input-send-event", 942# "arguments": { "device": "video0", 943# "events": [ { "type": "btn", 944# "data" : { "down": true, "button": "left" } } ] } } 945# <- { "return": {} } 946# 947# -> { "execute": "input-send-event", 948# "arguments": { "device": "video0", 949# "events": [ { "type": "btn", 950# "data" : { "down": false, "button": "left" } } ] } } 951# <- { "return": {} } 952# 953# 2. Press ctrl-alt-del. 954# 955# -> { "execute": "input-send-event", 956# "arguments": { "events": [ 957# { "type": "key", "data" : { "down": true, 958# "key": {"type": "qcode", "data": "ctrl" } } }, 959# { "type": "key", "data" : { "down": true, 960# "key": {"type": "qcode", "data": "alt" } } }, 961# { "type": "key", "data" : { "down": true, 962# "key": {"type": "qcode", "data": "delete" } } } ] } } 963# <- { "return": {} } 964# 965# 3. Move mouse pointer to absolute coordinates (20000, 400). 966# 967# -> { "execute": "input-send-event" , 968# "arguments": { "events": [ 969# { "type": "abs", "data" : { "axis": "x", "value" : 20000 } }, 970# { "type": "abs", "data" : { "axis": "y", "value" : 400 } } ] } } 971# <- { "return": {} } 972# 973## 974{ 'command': 'input-send-event', 975 'data': { '*device': 'str', 976 '*head' : 'int', 977 'events' : [ 'InputEvent' ] } } 978