1# -*- Mode: Python -*- 2# vim: filetype=python 3# 4 5## 6# = Net devices 7## 8 9{ 'include': 'common.json' } 10{ 'include': 'sockets.json' } 11 12## 13# @set_link: 14# 15# Sets the link status of a virtual network adapter. 16# 17# @name: the device name of the virtual network adapter 18# 19# @up: true to set the link status to be up 20# 21# Returns: Nothing on success 22# If @name is not a valid network device, DeviceNotFound 23# 24# Since: 0.14 25# 26# Notes: Not all network adapters support setting link status. This command 27# will succeed even if the network adapter does not support link status 28# notification. 29# 30# Example: 31# 32# -> { "execute": "set_link", 33# "arguments": { "name": "e1000.0", "up": false } } 34# <- { "return": {} } 35# 36## 37{ 'command': 'set_link', 'data': {'name': 'str', 'up': 'bool'} } 38 39## 40# @netdev_add: 41# 42# Add a network backend. 43# 44# Additional arguments depend on the type. 45# 46# Since: 0.14 47# 48# Returns: Nothing on success 49# If @type is not a valid network backend, DeviceNotFound 50# 51# Example: 52# 53# -> { "execute": "netdev_add", 54# "arguments": { "type": "user", "id": "netdev1", 55# "dnssearch": [ { "str": "example.org" } ] } } 56# <- { "return": {} } 57# 58## 59{ 'command': 'netdev_add', 'data': 'Netdev', 'boxed': true, 60 'allow-preconfig': true } 61 62## 63# @netdev_del: 64# 65# Remove a network backend. 66# 67# @id: the name of the network backend to remove 68# 69# Returns: Nothing on success 70# If @id is not a valid network backend, DeviceNotFound 71# 72# Since: 0.14 73# 74# Example: 75# 76# -> { "execute": "netdev_del", "arguments": { "id": "netdev1" } } 77# <- { "return": {} } 78# 79## 80{ 'command': 'netdev_del', 'data': {'id': 'str'}, 81 'allow-preconfig': true } 82 83## 84# @NetLegacyNicOptions: 85# 86# Create a new Network Interface Card. 87# 88# @netdev: id of -netdev to connect to 89# 90# @macaddr: MAC address 91# 92# @model: device model (e1000, rtl8139, virtio etc.) 93# 94# @addr: PCI device address 95# 96# @vectors: number of MSI-x vectors, 0 to disable MSI-X 97# 98# Since: 1.2 99## 100{ 'struct': 'NetLegacyNicOptions', 101 'data': { 102 '*netdev': 'str', 103 '*macaddr': 'str', 104 '*model': 'str', 105 '*addr': 'str', 106 '*vectors': 'uint32' } } 107 108## 109# @NetdevUserOptions: 110# 111# Use the user mode network stack which requires no administrator privilege to 112# run. 113# 114# @hostname: client hostname reported by the builtin DHCP server 115# 116# @restrict: isolate the guest from the host 117# 118# @ipv4: whether to support IPv4, default true for enabled 119# (since 2.6) 120# 121# @ipv6: whether to support IPv6, default true for enabled 122# (since 2.6) 123# 124# @ip: legacy parameter, use net= instead 125# 126# @net: IP network address that the guest will see, in the 127# form addr[/netmask] The netmask is optional, and can be 128# either in the form a.b.c.d or as a number of valid top-most 129# bits. Default is 10.0.2.0/24. 130# 131# @host: guest-visible address of the host 132# 133# @tftp: root directory of the built-in TFTP server 134# 135# @bootfile: BOOTP filename, for use with tftp= 136# 137# @dhcpstart: the first of the 16 IPs the built-in DHCP server can 138# assign 139# 140# @dns: guest-visible address of the virtual nameserver 141# 142# @dnssearch: list of DNS suffixes to search, passed as DHCP option 143# to the guest 144# 145# @domainname: guest-visible domain name of the virtual nameserver 146# (since 3.0) 147# 148# @ipv6-prefix: IPv6 network prefix (default is fec0::) (since 149# 2.6). The network prefix is given in the usual 150# hexadecimal IPv6 address notation. 151# 152# @ipv6-prefixlen: IPv6 network prefix length (default is 64) 153# (since 2.6) 154# 155# @ipv6-host: guest-visible IPv6 address of the host (since 2.6) 156# 157# @ipv6-dns: guest-visible IPv6 address of the virtual 158# nameserver (since 2.6) 159# 160# @smb: root directory of the built-in SMB server 161# 162# @smbserver: IP address of the built-in SMB server 163# 164# @hostfwd: redirect incoming TCP or UDP host connections to guest 165# endpoints 166# 167# @guestfwd: forward guest TCP connections 168# 169# @tftp-server-name: RFC2132 "TFTP server name" string (Since 3.1) 170# 171# Since: 1.2 172## 173{ 'struct': 'NetdevUserOptions', 174 'data': { 175 '*hostname': 'str', 176 '*restrict': 'bool', 177 '*ipv4': 'bool', 178 '*ipv6': 'bool', 179 '*ip': 'str', 180 '*net': 'str', 181 '*host': 'str', 182 '*tftp': 'str', 183 '*bootfile': 'str', 184 '*dhcpstart': 'str', 185 '*dns': 'str', 186 '*dnssearch': ['String'], 187 '*domainname': 'str', 188 '*ipv6-prefix': 'str', 189 '*ipv6-prefixlen': 'int', 190 '*ipv6-host': 'str', 191 '*ipv6-dns': 'str', 192 '*smb': 'str', 193 '*smbserver': 'str', 194 '*hostfwd': ['String'], 195 '*guestfwd': ['String'], 196 '*tftp-server-name': 'str' } } 197 198## 199# @NetdevTapOptions: 200# 201# Used to configure a host TAP network interface backend. 202# 203# @ifname: interface name 204# 205# @fd: file descriptor of an already opened tap 206# 207# @fds: multiple file descriptors of already opened multiqueue capable 208# tap 209# 210# @script: script to initialize the interface 211# 212# @downscript: script to shut down the interface 213# 214# @br: bridge name (since 2.8) 215# 216# @helper: command to execute to configure bridge 217# 218# @sndbuf: send buffer limit. Understands [TGMKkb] suffixes. 219# 220# @vnet_hdr: enable the IFF_VNET_HDR flag on the tap interface 221# 222# @vhost: enable vhost-net network accelerator 223# 224# @vhostfd: file descriptor of an already opened vhost net device 225# 226# @vhostfds: file descriptors of multiple already opened vhost net 227# devices 228# 229# @vhostforce: vhost on for non-MSIX virtio guests 230# 231# @queues: number of queues to be created for multiqueue capable tap 232# 233# @poll-us: maximum number of microseconds that could 234# be spent on busy polling for tap (since 2.7) 235# 236# Since: 1.2 237## 238{ 'struct': 'NetdevTapOptions', 239 'data': { 240 '*ifname': 'str', 241 '*fd': 'str', 242 '*fds': 'str', 243 '*script': 'str', 244 '*downscript': 'str', 245 '*br': 'str', 246 '*helper': 'str', 247 '*sndbuf': 'size', 248 '*vnet_hdr': 'bool', 249 '*vhost': 'bool', 250 '*vhostfd': 'str', 251 '*vhostfds': 'str', 252 '*vhostforce': 'bool', 253 '*queues': 'uint32', 254 '*poll-us': 'uint32'} } 255 256## 257# @NetdevSocketOptions: 258# 259# Socket netdevs are used to establish a network connection to another 260# QEMU virtual machine via a TCP socket. 261# 262# @fd: file descriptor of an already opened socket 263# 264# @listen: port number, and optional hostname, to listen on 265# 266# @connect: port number, and optional hostname, to connect to 267# 268# @mcast: UDP multicast address and port number 269# 270# @localaddr: source address and port for multicast and udp packets 271# 272# @udp: UDP unicast address and port number 273# 274# Since: 1.2 275## 276{ 'struct': 'NetdevSocketOptions', 277 'data': { 278 '*fd': 'str', 279 '*listen': 'str', 280 '*connect': 'str', 281 '*mcast': 'str', 282 '*localaddr': 'str', 283 '*udp': 'str' } } 284 285## 286# @NetdevL2TPv3Options: 287# 288# Configure an Ethernet over L2TPv3 tunnel. 289# 290# @src: source address 291# 292# @dst: destination address 293# 294# @srcport: source port - mandatory for udp, optional for ip 295# 296# @dstport: destination port - mandatory for udp, optional for ip 297# 298# @ipv6: force the use of ipv6 299# 300# @udp: use the udp version of l2tpv3 encapsulation 301# 302# @cookie64: use 64 bit cookies 303# 304# @counter: have sequence counter 305# 306# @pincounter: pin sequence counter to zero - 307# workaround for buggy implementations or 308# networks with packet reorder 309# 310# @txcookie: 32 or 64 bit transmit cookie 311# 312# @rxcookie: 32 or 64 bit receive cookie 313# 314# @txsession: 32 bit transmit session 315# 316# @rxsession: 32 bit receive session - if not specified 317# set to the same value as transmit 318# 319# @offset: additional offset - allows the insertion of 320# additional application-specific data before the packet payload 321# 322# Since: 2.1 323## 324{ 'struct': 'NetdevL2TPv3Options', 325 'data': { 326 'src': 'str', 327 'dst': 'str', 328 '*srcport': 'str', 329 '*dstport': 'str', 330 '*ipv6': 'bool', 331 '*udp': 'bool', 332 '*cookie64': 'bool', 333 '*counter': 'bool', 334 '*pincounter': 'bool', 335 '*txcookie': 'uint64', 336 '*rxcookie': 'uint64', 337 'txsession': 'uint32', 338 '*rxsession': 'uint32', 339 '*offset': 'uint32' } } 340 341## 342# @NetdevVdeOptions: 343# 344# Connect to a vde switch running on the host. 345# 346# @sock: socket path 347# 348# @port: port number 349# 350# @group: group owner of socket 351# 352# @mode: permissions for socket 353# 354# Since: 1.2 355## 356{ 'struct': 'NetdevVdeOptions', 357 'data': { 358 '*sock': 'str', 359 '*port': 'uint16', 360 '*group': 'str', 361 '*mode': 'uint16' } } 362 363## 364# @NetdevBridgeOptions: 365# 366# Connect a host TAP network interface to a host bridge device. 367# 368# @br: bridge name 369# 370# @helper: command to execute to configure bridge 371# 372# Since: 1.2 373## 374{ 'struct': 'NetdevBridgeOptions', 375 'data': { 376 '*br': 'str', 377 '*helper': 'str' } } 378 379## 380# @NetdevHubPortOptions: 381# 382# Connect two or more net clients through a software hub. 383# 384# @hubid: hub identifier number 385# @netdev: used to connect hub to a netdev instead of a device (since 2.12) 386# 387# Since: 1.2 388## 389{ 'struct': 'NetdevHubPortOptions', 390 'data': { 391 'hubid': 'int32', 392 '*netdev': 'str' } } 393 394## 395# @NetdevNetmapOptions: 396# 397# Connect a client to a netmap-enabled NIC or to a VALE switch port 398# 399# @ifname: Either the name of an existing network interface supported by 400# netmap, or the name of a VALE port (created on the fly). 401# A VALE port name is in the form 'valeXXX:YYY', where XXX and 402# YYY are non-negative integers. XXX identifies a switch and 403# YYY identifies a port of the switch. VALE ports having the 404# same XXX are therefore connected to the same switch. 405# 406# @devname: path of the netmap device (default: '/dev/netmap'). 407# 408# Since: 2.0 409## 410{ 'struct': 'NetdevNetmapOptions', 411 'data': { 412 'ifname': 'str', 413 '*devname': 'str' } } 414 415## 416# @NetdevVhostUserOptions: 417# 418# Vhost-user network backend 419# 420# @chardev: name of a unix socket chardev 421# 422# @vhostforce: vhost on for non-MSIX virtio guests (default: false). 423# 424# @queues: number of queues to be created for multiqueue vhost-user 425# (default: 1) (Since 2.5) 426# 427# Since: 2.1 428## 429{ 'struct': 'NetdevVhostUserOptions', 430 'data': { 431 'chardev': 'str', 432 '*vhostforce': 'bool', 433 '*queues': 'int' } } 434 435## 436# @NetdevVhostVDPAOptions: 437# 438# Vhost-vdpa network backend 439# 440# vDPA device is a device that uses a datapath which complies with the virtio 441# specifications with a vendor specific control path. 442# 443# @vhostdev: path of vhost-vdpa device 444# (default:'/dev/vhost-vdpa-0') 445# 446# @vhostfd: file descriptor of an already opened vhost vdpa device 447# 448# @queues: number of queues to be created for multiqueue vhost-vdpa 449# (default: 1) 450# 451# @x-svq: Start device with (experimental) shadow virtqueue. (Since 7.1) 452# (default: false) 453# 454# Features: 455# @unstable: Member @x-svq is experimental. 456# 457# Since: 5.1 458## 459{ 'struct': 'NetdevVhostVDPAOptions', 460 'data': { 461 '*vhostdev': 'str', 462 '*vhostfd': 'str', 463 '*queues': 'int', 464 '*x-svq': {'type': 'bool', 'features' : [ 'unstable'] } } } 465 466## 467# @NetdevVmnetHostOptions: 468# 469# vmnet (host mode) network backend. 470# 471# Allows the vmnet interface to communicate with other vmnet 472# interfaces that are in host mode and also with the host. 473# 474# @start-address: The starting IPv4 address to use for the interface. 475# Must be in the private IP range (RFC 1918). Must be 476# specified along with @end-address and @subnet-mask. 477# This address is used as the gateway address. The 478# subsequent address up to and including end-address are 479# placed in the DHCP pool. 480# 481# @end-address: The DHCP IPv4 range end address to use for the 482# interface. Must be in the private IP range (RFC 1918). 483# Must be specified along with @start-address and 484# @subnet-mask. 485# 486# @subnet-mask: The IPv4 subnet mask to use on the interface. Must 487# be specified along with @start-address and @subnet-mask. 488# 489# @isolated: Enable isolation for this interface. Interface isolation 490# ensures that vmnet interface is not able to communicate 491# with any other vmnet interfaces. Only communication with 492# host is allowed. Requires at least macOS Big Sur 11.0. 493# 494# @net-uuid: The identifier (UUID) to uniquely identify the isolated 495# network vmnet interface should be added to. If 496# set, no DHCP service is provided for this interface and 497# network communication is allowed only with other interfaces 498# added to this network identified by the UUID. Requires 499# at least macOS Big Sur 11.0. 500# 501# Since: 7.1 502## 503{ 'struct': 'NetdevVmnetHostOptions', 504 'data': { 505 '*start-address': 'str', 506 '*end-address': 'str', 507 '*subnet-mask': 'str', 508 '*isolated': 'bool', 509 '*net-uuid': 'str' }, 510 'if': 'CONFIG_VMNET' } 511 512## 513# @NetdevVmnetSharedOptions: 514# 515# vmnet (shared mode) network backend. 516# 517# Allows traffic originating from the vmnet interface to reach the 518# Internet through a network address translator (NAT). 519# The vmnet interface can communicate with the host and with 520# other shared mode interfaces on the same subnet. If no DHCP 521# settings, subnet mask and IPv6 prefix specified, the interface can 522# communicate with any of other interfaces in shared mode. 523# 524# @start-address: The starting IPv4 address to use for the interface. 525# Must be in the private IP range (RFC 1918). Must be 526# specified along with @end-address and @subnet-mask. 527# This address is used as the gateway address. The 528# subsequent address up to and including end-address are 529# placed in the DHCP pool. 530# 531# @end-address: The DHCP IPv4 range end address to use for the 532# interface. Must be in the private IP range (RFC 1918). 533# Must be specified along with @start-address and @subnet-mask. 534# 535# @subnet-mask: The IPv4 subnet mask to use on the interface. Must 536# be specified along with @start-address and @subnet-mask. 537# 538# @isolated: Enable isolation for this interface. Interface isolation 539# ensures that vmnet interface is not able to communicate 540# with any other vmnet interfaces. Only communication with 541# host is allowed. Requires at least macOS Big Sur 11.0. 542# 543# @nat66-prefix: The IPv6 prefix to use into guest network. Must be a 544# unique local address i.e. start with fd00::/8 and have 545# length of 64. 546# 547# Since: 7.1 548## 549{ 'struct': 'NetdevVmnetSharedOptions', 550 'data': { 551 '*start-address': 'str', 552 '*end-address': 'str', 553 '*subnet-mask': 'str', 554 '*isolated': 'bool', 555 '*nat66-prefix': 'str' }, 556 'if': 'CONFIG_VMNET' } 557 558## 559# @NetdevVmnetBridgedOptions: 560# 561# vmnet (bridged mode) network backend. 562# 563# Bridges the vmnet interface with a physical network interface. 564# 565# @ifname: The name of the physical interface to be bridged. 566# 567# @isolated: Enable isolation for this interface. Interface isolation 568# ensures that vmnet interface is not able to communicate 569# with any other vmnet interfaces. Only communication with 570# host is allowed. Requires at least macOS Big Sur 11.0. 571# 572# Since: 7.1 573## 574{ 'struct': 'NetdevVmnetBridgedOptions', 575 'data': { 576 'ifname': 'str', 577 '*isolated': 'bool' }, 578 'if': 'CONFIG_VMNET' } 579 580## 581# @NetdevStreamOptions: 582# 583# Configuration info for stream socket netdev 584# 585# @addr: socket address to listen on (server=true) 586# or connect to (server=false) 587# @server: create server socket (default: false) 588# @reconnect: For a client socket, if a socket is disconnected, 589# then attempt a reconnect after the given number of seconds. 590# Setting this to zero disables this function. (default: 0) 591# (since 8.0) 592# 593# Only SocketAddress types 'unix', 'inet' and 'fd' are supported. 594# 595# Since: 7.2 596## 597{ 'struct': 'NetdevStreamOptions', 598 'data': { 599 'addr': 'SocketAddress', 600 '*server': 'bool', 601 '*reconnect': 'uint32' } } 602 603## 604# @NetdevDgramOptions: 605# 606# Configuration info for datagram socket netdev. 607# 608# @remote: remote address 609# @local: local address 610# 611# Only SocketAddress types 'unix', 'inet' and 'fd' are supported. 612# 613# If remote address is present and it's a multicast address, local address 614# is optional. Otherwise local address is required and remote address is 615# optional. 616# 617# .. table:: Valid parameters combination table 618# :widths: auto 619# 620# ============= ======== ===== 621# remote local okay? 622# ============= ======== ===== 623# absent absent no 624# absent not fd no 625# absent fd yes 626# multicast absent yes 627# multicast present yes 628# not multicast absent no 629# not multicast present yes 630# ============= ======== ===== 631# 632# Since: 7.2 633## 634{ 'struct': 'NetdevDgramOptions', 635 'data': { 636 '*local': 'SocketAddress', 637 '*remote': 'SocketAddress' } } 638 639## 640# @NetClientDriver: 641# 642# Available netdev drivers. 643# 644# Since: 2.7 645# 646# @vhost-vdpa since 5.1 647# @vmnet-host since 7.1 648# @vmnet-shared since 7.1 649# @vmnet-bridged since 7.1 650# @stream since 7.2 651# @dgram since 7.2 652## 653{ 'enum': 'NetClientDriver', 654 'data': [ 'none', 'nic', 'user', 'tap', 'l2tpv3', 'socket', 'stream', 655 'dgram', 'vde', 'bridge', 'hubport', 'netmap', 'vhost-user', 656 'vhost-vdpa', 657 { 'name': 'vmnet-host', 'if': 'CONFIG_VMNET' }, 658 { 'name': 'vmnet-shared', 'if': 'CONFIG_VMNET' }, 659 { 'name': 'vmnet-bridged', 'if': 'CONFIG_VMNET' }] } 660 661## 662# @Netdev: 663# 664# Captures the configuration of a network device. 665# 666# @id: identifier for monitor commands. 667# 668# @type: Specify the driver used for interpreting remaining arguments. 669# 670# Since: 1.2 671# 672# 'l2tpv3' - since 2.1 673# 'vmnet-host' - since 7.1 674# 'vmnet-shared' - since 7.1 675# 'vmnet-bridged' - since 7.1 676# 'stream' since 7.2 677# 'dgram' since 7.2 678## 679{ 'union': 'Netdev', 680 'base': { 'id': 'str', 'type': 'NetClientDriver' }, 681 'discriminator': 'type', 682 'data': { 683 'nic': 'NetLegacyNicOptions', 684 'user': 'NetdevUserOptions', 685 'tap': 'NetdevTapOptions', 686 'l2tpv3': 'NetdevL2TPv3Options', 687 'socket': 'NetdevSocketOptions', 688 'stream': 'NetdevStreamOptions', 689 'dgram': 'NetdevDgramOptions', 690 'vde': 'NetdevVdeOptions', 691 'bridge': 'NetdevBridgeOptions', 692 'hubport': 'NetdevHubPortOptions', 693 'netmap': 'NetdevNetmapOptions', 694 'vhost-user': 'NetdevVhostUserOptions', 695 'vhost-vdpa': 'NetdevVhostVDPAOptions', 696 'vmnet-host': { 'type': 'NetdevVmnetHostOptions', 697 'if': 'CONFIG_VMNET' }, 698 'vmnet-shared': { 'type': 'NetdevVmnetSharedOptions', 699 'if': 'CONFIG_VMNET' }, 700 'vmnet-bridged': { 'type': 'NetdevVmnetBridgedOptions', 701 'if': 'CONFIG_VMNET' } } } 702 703## 704# @RxState: 705# 706# Packets receiving state 707# 708# @normal: filter assigned packets according to the mac-table 709# 710# @none: don't receive any assigned packet 711# 712# @all: receive all assigned packets 713# 714# Since: 1.6 715## 716{ 'enum': 'RxState', 'data': [ 'normal', 'none', 'all' ] } 717 718## 719# @RxFilterInfo: 720# 721# Rx-filter information for a NIC. 722# 723# @name: net client name 724# 725# @promiscuous: whether promiscuous mode is enabled 726# 727# @multicast: multicast receive state 728# 729# @unicast: unicast receive state 730# 731# @vlan: vlan receive state (Since 2.0) 732# 733# @broadcast-allowed: whether to receive broadcast 734# 735# @multicast-overflow: multicast table is overflowed or not 736# 737# @unicast-overflow: unicast table is overflowed or not 738# 739# @main-mac: the main macaddr string 740# 741# @vlan-table: a list of active vlan id 742# 743# @unicast-table: a list of unicast macaddr string 744# 745# @multicast-table: a list of multicast macaddr string 746# 747# Since: 1.6 748## 749{ 'struct': 'RxFilterInfo', 750 'data': { 751 'name': 'str', 752 'promiscuous': 'bool', 753 'multicast': 'RxState', 754 'unicast': 'RxState', 755 'vlan': 'RxState', 756 'broadcast-allowed': 'bool', 757 'multicast-overflow': 'bool', 758 'unicast-overflow': 'bool', 759 'main-mac': 'str', 760 'vlan-table': ['int'], 761 'unicast-table': ['str'], 762 'multicast-table': ['str'] }} 763 764## 765# @query-rx-filter: 766# 767# Return rx-filter information for all NICs (or for the given NIC). 768# 769# @name: net client name 770# 771# Returns: list of @RxFilterInfo for all NICs (or for the given NIC). 772# Returns an error if the given @name doesn't exist, or given 773# NIC doesn't support rx-filter querying, or given net client 774# isn't a NIC. 775# 776# Since: 1.6 777# 778# Example: 779# 780# -> { "execute": "query-rx-filter", "arguments": { "name": "vnet0" } } 781# <- { "return": [ 782# { 783# "promiscuous": true, 784# "name": "vnet0", 785# "main-mac": "52:54:00:12:34:56", 786# "unicast": "normal", 787# "vlan": "normal", 788# "vlan-table": [ 789# 4, 790# 0 791# ], 792# "unicast-table": [ 793# ], 794# "multicast": "normal", 795# "multicast-overflow": false, 796# "unicast-overflow": false, 797# "multicast-table": [ 798# "01:00:5e:00:00:01", 799# "33:33:00:00:00:01", 800# "33:33:ff:12:34:56" 801# ], 802# "broadcast-allowed": false 803# } 804# ] 805# } 806# 807## 808{ 'command': 'query-rx-filter', 809 'data': { '*name': 'str' }, 810 'returns': ['RxFilterInfo'] } 811 812## 813# @NIC_RX_FILTER_CHANGED: 814# 815# Emitted once until the 'query-rx-filter' command is executed, the first event 816# will always be emitted 817# 818# @name: net client name 819# 820# @path: device path 821# 822# Since: 1.6 823# 824# Example: 825# 826# <- { "event": "NIC_RX_FILTER_CHANGED", 827# "data": { "name": "vnet0", 828# "path": "/machine/peripheral/vnet0/virtio-backend" }, 829# "timestamp": { "seconds": 1368697518, "microseconds": 326866 } } 830# 831## 832{ 'event': 'NIC_RX_FILTER_CHANGED', 833 'data': { '*name': 'str', 'path': 'str' } } 834 835## 836# @AnnounceParameters: 837# 838# Parameters for self-announce timers 839# 840# @initial: Initial delay (in ms) before sending the first GARP/RARP 841# announcement 842# 843# @max: Maximum delay (in ms) between GARP/RARP announcement packets 844# 845# @rounds: Number of self-announcement attempts 846# 847# @step: Delay increase (in ms) after each self-announcement attempt 848# 849# @interfaces: An optional list of interface names, which restricts the 850# announcement to the listed interfaces. (Since 4.1) 851# 852# @id: A name to be used to identify an instance of announce-timers 853# and to allow it to modified later. Not for use as 854# part of the migration parameters. (Since 4.1) 855# 856# Since: 4.0 857## 858 859{ 'struct': 'AnnounceParameters', 860 'data': { 'initial': 'int', 861 'max': 'int', 862 'rounds': 'int', 863 'step': 'int', 864 '*interfaces': ['str'], 865 '*id' : 'str' } } 866 867## 868# @announce-self: 869# 870# Trigger generation of broadcast RARP frames to update network switches. 871# This can be useful when network bonds fail-over the active slave. 872# 873# Example: 874# 875# -> { "execute": "announce-self", 876# "arguments": { 877# "initial": 50, "max": 550, "rounds": 10, "step": 50, 878# "interfaces": ["vn2", "vn3"], "id": "bob" } } 879# <- { "return": {} } 880# 881# Since: 4.0 882## 883{ 'command': 'announce-self', 'boxed': true, 884 'data' : 'AnnounceParameters'} 885 886## 887# @FAILOVER_NEGOTIATED: 888# 889# Emitted when VIRTIO_NET_F_STANDBY was enabled during feature negotiation. 890# Failover primary devices which were hidden (not hotplugged when requested) 891# before will now be hotplugged by the virtio-net standby device. 892# 893# @device-id: QEMU device id of the unplugged device 894# 895# Since: 4.2 896# 897# Example: 898# 899# <- { "event": "FAILOVER_NEGOTIATED", 900# "data": { "device-id": "net1" }, 901# "timestamp": { "seconds": 1368697518, "microseconds": 326866 } } 902# 903## 904{ 'event': 'FAILOVER_NEGOTIATED', 905 'data': {'device-id': 'str'} } 906 907## 908# @NETDEV_STREAM_CONNECTED: 909# 910# Emitted when the netdev stream backend is connected 911# 912# @netdev-id: QEMU netdev id that is connected 913# @addr: The destination address 914# 915# Since: 7.2 916# 917# Example: 918# 919# <- { "event": "NETDEV_STREAM_CONNECTED", 920# "data": { "netdev-id": "netdev0", 921# "addr": { "port": "47666", "ipv6": true, 922# "host": "::1", "type": "inet" } }, 923# "timestamp": { "seconds": 1666269863, "microseconds": 311222 } } 924# 925# or 926# 927# <- { "event": "NETDEV_STREAM_CONNECTED", 928# "data": { "netdev-id": "netdev0", 929# "addr": { "path": "/tmp/qemu0", "type": "unix" } }, 930# "timestamp": { "seconds": 1666269706, "microseconds": 413651 } } 931# 932## 933{ 'event': 'NETDEV_STREAM_CONNECTED', 934 'data': { 'netdev-id': 'str', 935 'addr': 'SocketAddress' } } 936 937## 938# @NETDEV_STREAM_DISCONNECTED: 939# 940# Emitted when the netdev stream backend is disconnected 941# 942# @netdev-id: QEMU netdev id that is disconnected 943# 944# Since: 7.2 945# 946# Example: 947# 948# <- { 'event': 'NETDEV_STREAM_DISCONNECTED', 949# 'data': {'netdev-id': 'netdev0'}, 950# 'timestamp': {'seconds': 1663330937, 'microseconds': 526695} } 951# 952## 953{ 'event': 'NETDEV_STREAM_DISCONNECTED', 954 'data': { 'netdev-id': 'str' } } 955