1# -*- Mode: Python -*- 2# vim: filetype=python 3# 4 5## 6# = Net devices 7## 8 9{ 'include': 'common.json' } 10{ 'include': 'sockets.json' } 11 12## 13# @set_link: 14# 15# Sets the link status of a virtual network adapter. 16# 17# @name: the device name of the virtual network adapter 18# 19# @up: true to set the link status to be up 20# 21# Returns: Nothing on success If @name is not a valid network device, 22# DeviceNotFound 23# 24# Since: 0.14 25# 26# Notes: Not all network adapters support setting link status. This 27# command will succeed even if the network adapter does not 28# support link status notification. 29# 30# Example: 31# 32# -> { "execute": "set_link", 33# "arguments": { "name": "e1000.0", "up": false } } 34# <- { "return": {} } 35## 36{ 'command': 'set_link', 'data': {'name': 'str', 'up': 'bool'} } 37 38## 39# @netdev_add: 40# 41# Add a network backend. 42# 43# Additional arguments depend on the type. 44# 45# Since: 0.14 46# 47# Returns: Nothing on success If @type is not a valid network backend, 48# DeviceNotFound 49# 50# Example: 51# 52# -> { "execute": "netdev_add", 53# "arguments": { "type": "user", "id": "netdev1", 54# "dnssearch": [ { "str": "example.org" } ] } } 55# <- { "return": {} } 56## 57{ 'command': 'netdev_add', 'data': 'Netdev', 'boxed': true, 58 'allow-preconfig': true } 59 60## 61# @netdev_del: 62# 63# Remove a network backend. 64# 65# @id: the name of the network backend to remove 66# 67# Returns: Nothing on success If @id is not a valid network backend, 68# DeviceNotFound 69# 70# Since: 0.14 71# 72# Example: 73# 74# -> { "execute": "netdev_del", "arguments": { "id": "netdev1" } } 75# <- { "return": {} } 76## 77{ 'command': 'netdev_del', 'data': {'id': 'str'}, 78 'allow-preconfig': true } 79 80## 81# @NetLegacyNicOptions: 82# 83# Create a new Network Interface Card. 84# 85# @netdev: id of -netdev to connect to 86# 87# @macaddr: MAC address 88# 89# @model: device model (e1000, rtl8139, virtio etc.) 90# 91# @addr: PCI device address 92# 93# @vectors: number of MSI-x vectors, 0 to disable MSI-X 94# 95# Since: 1.2 96## 97{ 'struct': 'NetLegacyNicOptions', 98 'data': { 99 '*netdev': 'str', 100 '*macaddr': 'str', 101 '*model': 'str', 102 '*addr': 'str', 103 '*vectors': 'uint32' } } 104 105## 106# @NetdevUserOptions: 107# 108# Use the user mode network stack which requires no administrator 109# privilege to run. 110# 111# @hostname: client hostname reported by the builtin DHCP server 112# 113# @restrict: isolate the guest from the host 114# 115# @ipv4: whether to support IPv4, default true for enabled (since 2.6) 116# 117# @ipv6: whether to support IPv6, default true for enabled (since 2.6) 118# 119# @ip: legacy parameter, use net= instead 120# 121# @net: IP network address that the guest will see, in the form 122# addr[/netmask] The netmask is optional, and can be either in the 123# form a.b.c.d or as a number of valid top-most bits. Default is 124# 10.0.2.0/24. 125# 126# @host: guest-visible address of the host 127# 128# @tftp: root directory of the built-in TFTP server 129# 130# @bootfile: BOOTP filename, for use with tftp= 131# 132# @dhcpstart: the first of the 16 IPs the built-in DHCP server can 133# assign 134# 135# @dns: guest-visible address of the virtual nameserver 136# 137# @dnssearch: list of DNS suffixes to search, passed as DHCP option to 138# the guest 139# 140# @domainname: guest-visible domain name of the virtual nameserver 141# (since 3.0) 142# 143# @ipv6-prefix: IPv6 network prefix (default is fec0::) (since 2.6). 144# The network prefix is given in the usual hexadecimal IPv6 145# address notation. 146# 147# @ipv6-prefixlen: IPv6 network prefix length (default is 64) (since 148# 2.6) 149# 150# @ipv6-host: guest-visible IPv6 address of the host (since 2.6) 151# 152# @ipv6-dns: guest-visible IPv6 address of the virtual nameserver 153# (since 2.6) 154# 155# @smb: root directory of the built-in SMB server 156# 157# @smbserver: IP address of the built-in SMB server 158# 159# @hostfwd: redirect incoming TCP or UDP host connections to guest 160# endpoints 161# 162# @guestfwd: forward guest TCP connections 163# 164# @tftp-server-name: RFC2132 "TFTP server name" string (Since 3.1) 165# 166# Since: 1.2 167## 168{ 'struct': 'NetdevUserOptions', 169 'data': { 170 '*hostname': 'str', 171 '*restrict': 'bool', 172 '*ipv4': 'bool', 173 '*ipv6': 'bool', 174 '*ip': 'str', 175 '*net': 'str', 176 '*host': 'str', 177 '*tftp': 'str', 178 '*bootfile': 'str', 179 '*dhcpstart': 'str', 180 '*dns': 'str', 181 '*dnssearch': ['String'], 182 '*domainname': 'str', 183 '*ipv6-prefix': 'str', 184 '*ipv6-prefixlen': 'int', 185 '*ipv6-host': 'str', 186 '*ipv6-dns': 'str', 187 '*smb': 'str', 188 '*smbserver': 'str', 189 '*hostfwd': ['String'], 190 '*guestfwd': ['String'], 191 '*tftp-server-name': 'str' } } 192 193## 194# @NetdevTapOptions: 195# 196# Used to configure a host TAP network interface backend. 197# 198# @ifname: interface name 199# 200# @fd: file descriptor of an already opened tap 201# 202# @fds: multiple file descriptors of already opened multiqueue capable 203# tap 204# 205# @script: script to initialize the interface 206# 207# @downscript: script to shut down the interface 208# 209# @br: bridge name (since 2.8) 210# 211# @helper: command to execute to configure bridge 212# 213# @sndbuf: send buffer limit. Understands [TGMKkb] suffixes. 214# 215# @vnet_hdr: enable the IFF_VNET_HDR flag on the tap interface 216# 217# @vhost: enable vhost-net network accelerator 218# 219# @vhostfd: file descriptor of an already opened vhost net device 220# 221# @vhostfds: file descriptors of multiple already opened vhost net 222# devices 223# 224# @vhostforce: vhost on for non-MSIX virtio guests 225# 226# @queues: number of queues to be created for multiqueue capable tap 227# 228# @poll-us: maximum number of microseconds that could be spent on busy 229# polling for tap (since 2.7) 230# 231# Since: 1.2 232## 233{ 'struct': 'NetdevTapOptions', 234 'data': { 235 '*ifname': 'str', 236 '*fd': 'str', 237 '*fds': 'str', 238 '*script': 'str', 239 '*downscript': 'str', 240 '*br': 'str', 241 '*helper': 'str', 242 '*sndbuf': 'size', 243 '*vnet_hdr': 'bool', 244 '*vhost': 'bool', 245 '*vhostfd': 'str', 246 '*vhostfds': 'str', 247 '*vhostforce': 'bool', 248 '*queues': 'uint32', 249 '*poll-us': 'uint32'} } 250 251## 252# @NetdevSocketOptions: 253# 254# Socket netdevs are used to establish a network connection to another 255# QEMU virtual machine via a TCP socket. 256# 257# @fd: file descriptor of an already opened socket 258# 259# @listen: port number, and optional hostname, to listen on 260# 261# @connect: port number, and optional hostname, to connect to 262# 263# @mcast: UDP multicast address and port number 264# 265# @localaddr: source address and port for multicast and udp packets 266# 267# @udp: UDP unicast address and port number 268# 269# Since: 1.2 270## 271{ 'struct': 'NetdevSocketOptions', 272 'data': { 273 '*fd': 'str', 274 '*listen': 'str', 275 '*connect': 'str', 276 '*mcast': 'str', 277 '*localaddr': 'str', 278 '*udp': 'str' } } 279 280## 281# @NetdevL2TPv3Options: 282# 283# Configure an Ethernet over L2TPv3 tunnel. 284# 285# @src: source address 286# 287# @dst: destination address 288# 289# @srcport: source port - mandatory for udp, optional for ip 290# 291# @dstport: destination port - mandatory for udp, optional for ip 292# 293# @ipv6: force the use of ipv6 294# 295# @udp: use the udp version of l2tpv3 encapsulation 296# 297# @cookie64: use 64 bit cookies 298# 299# @counter: have sequence counter 300# 301# @pincounter: pin sequence counter to zero - workaround for buggy 302# implementations or networks with packet reorder 303# 304# @txcookie: 32 or 64 bit transmit cookie 305# 306# @rxcookie: 32 or 64 bit receive cookie 307# 308# @txsession: 32 bit transmit session 309# 310# @rxsession: 32 bit receive session - if not specified set to the 311# same value as transmit 312# 313# @offset: additional offset - allows the insertion of additional 314# application-specific data before the packet payload 315# 316# Since: 2.1 317## 318{ 'struct': 'NetdevL2TPv3Options', 319 'data': { 320 'src': 'str', 321 'dst': 'str', 322 '*srcport': 'str', 323 '*dstport': 'str', 324 '*ipv6': 'bool', 325 '*udp': 'bool', 326 '*cookie64': 'bool', 327 '*counter': 'bool', 328 '*pincounter': 'bool', 329 '*txcookie': 'uint64', 330 '*rxcookie': 'uint64', 331 'txsession': 'uint32', 332 '*rxsession': 'uint32', 333 '*offset': 'uint32' } } 334 335## 336# @NetdevVdeOptions: 337# 338# Connect to a vde switch running on the host. 339# 340# @sock: socket path 341# 342# @port: port number 343# 344# @group: group owner of socket 345# 346# @mode: permissions for socket 347# 348# Since: 1.2 349## 350{ 'struct': 'NetdevVdeOptions', 351 'data': { 352 '*sock': 'str', 353 '*port': 'uint16', 354 '*group': 'str', 355 '*mode': 'uint16' } } 356 357## 358# @NetdevBridgeOptions: 359# 360# Connect a host TAP network interface to a host bridge device. 361# 362# @br: bridge name 363# 364# @helper: command to execute to configure bridge 365# 366# Since: 1.2 367## 368{ 'struct': 'NetdevBridgeOptions', 369 'data': { 370 '*br': 'str', 371 '*helper': 'str' } } 372 373## 374# @NetdevHubPortOptions: 375# 376# Connect two or more net clients through a software hub. 377# 378# @hubid: hub identifier number 379# 380# @netdev: used to connect hub to a netdev instead of a device (since 381# 2.12) 382# 383# Since: 1.2 384## 385{ 'struct': 'NetdevHubPortOptions', 386 'data': { 387 'hubid': 'int32', 388 '*netdev': 'str' } } 389 390## 391# @NetdevNetmapOptions: 392# 393# Connect a client to a netmap-enabled NIC or to a VALE switch port 394# 395# @ifname: Either the name of an existing network interface supported 396# by netmap, or the name of a VALE port (created on the fly). A 397# VALE port name is in the form 'valeXXX:YYY', where XXX and YYY 398# are non-negative integers. XXX identifies a switch and YYY 399# identifies a port of the switch. VALE ports having the same XXX 400# are therefore connected to the same switch. 401# 402# @devname: path of the netmap device (default: '/dev/netmap'). 403# 404# Since: 2.0 405## 406{ 'struct': 'NetdevNetmapOptions', 407 'data': { 408 'ifname': 'str', 409 '*devname': 'str' } } 410 411## 412# @AFXDPMode: 413# 414# Attach mode for a default XDP program 415# 416# @skb: generic mode, no driver support necessary 417# 418# @native: DRV mode, program is attached to a driver, packets are passed to 419# the socket without allocation of skb. 420# 421# Since: 8.2 422## 423{ 'enum': 'AFXDPMode', 424 'data': [ 'native', 'skb' ], 425 'if': 'CONFIG_AF_XDP' } 426 427## 428# @NetdevAFXDPOptions: 429# 430# AF_XDP network backend 431# 432# @ifname: The name of an existing network interface. 433# 434# @mode: Attach mode for a default XDP program. If not specified, then 435# 'native' will be tried first, then 'skb'. 436# 437# @force-copy: Force XDP copy mode even if device supports zero-copy. 438# (default: false) 439# 440# @queues: number of queues to be used for multiqueue interfaces (default: 1). 441# 442# @start-queue: Use @queues starting from this queue number (default: 0). 443# 444# @inhibit: Don't load a default XDP program, use one already loaded to 445# the interface (default: false). Requires @sock-fds. 446# 447# @sock-fds: A colon (:) separated list of file descriptors for already open 448# but not bound AF_XDP sockets in the queue order. One fd per queue. 449# These descriptors should already be added into XDP socket map for 450# corresponding queues. Requires @inhibit. 451# 452# Since: 8.2 453## 454{ 'struct': 'NetdevAFXDPOptions', 455 'data': { 456 'ifname': 'str', 457 '*mode': 'AFXDPMode', 458 '*force-copy': 'bool', 459 '*queues': 'int', 460 '*start-queue': 'int', 461 '*inhibit': 'bool', 462 '*sock-fds': 'str' }, 463 'if': 'CONFIG_AF_XDP' } 464 465## 466# @NetdevVhostUserOptions: 467# 468# Vhost-user network backend 469# 470# @chardev: name of a unix socket chardev 471# 472# @vhostforce: vhost on for non-MSIX virtio guests (default: false). 473# 474# @queues: number of queues to be created for multiqueue vhost-user 475# (default: 1) (Since 2.5) 476# 477# Since: 2.1 478## 479{ 'struct': 'NetdevVhostUserOptions', 480 'data': { 481 'chardev': 'str', 482 '*vhostforce': 'bool', 483 '*queues': 'int' } } 484 485## 486# @NetdevVhostVDPAOptions: 487# 488# Vhost-vdpa network backend 489# 490# vDPA device is a device that uses a datapath which complies with the 491# virtio specifications with a vendor specific control path. 492# 493# @vhostdev: path of vhost-vdpa device (default:'/dev/vhost-vdpa-0') 494# 495# @vhostfd: file descriptor of an already opened vhost vdpa device 496# 497# @queues: number of queues to be created for multiqueue vhost-vdpa 498# (default: 1) 499# 500# @x-svq: Start device with (experimental) shadow virtqueue. (Since 501# 7.1) (default: false) 502# 503# Features: 504# 505# @unstable: Member @x-svq is experimental. 506# 507# Since: 5.1 508## 509{ 'struct': 'NetdevVhostVDPAOptions', 510 'data': { 511 '*vhostdev': 'str', 512 '*vhostfd': 'str', 513 '*queues': 'int', 514 '*x-svq': {'type': 'bool', 'features' : [ 'unstable'] } } } 515 516## 517# @NetdevVmnetHostOptions: 518# 519# vmnet (host mode) network backend. 520# 521# Allows the vmnet interface to communicate with other vmnet 522# interfaces that are in host mode and also with the host. 523# 524# @start-address: The starting IPv4 address to use for the interface. 525# Must be in the private IP range (RFC 1918). Must be specified 526# along with @end-address and @subnet-mask. This address is used 527# as the gateway address. The subsequent address up to and 528# including end-address are placed in the DHCP pool. 529# 530# @end-address: The DHCP IPv4 range end address to use for the 531# interface. Must be in the private IP range (RFC 1918). Must be 532# specified along with @start-address and @subnet-mask. 533# 534# @subnet-mask: The IPv4 subnet mask to use on the interface. Must be 535# specified along with @start-address and @subnet-mask. 536# 537# @isolated: Enable isolation for this interface. Interface isolation 538# ensures that vmnet interface is not able to communicate with any 539# other vmnet interfaces. Only communication with host is 540# allowed. Requires at least macOS Big Sur 11.0. 541# 542# @net-uuid: The identifier (UUID) to uniquely identify the isolated 543# network vmnet interface should be added to. If set, no DHCP 544# service is provided for this interface and network communication 545# is allowed only with other interfaces added to this network 546# identified by the UUID. Requires at least macOS Big Sur 11.0. 547# 548# Since: 7.1 549## 550{ 'struct': 'NetdevVmnetHostOptions', 551 'data': { 552 '*start-address': 'str', 553 '*end-address': 'str', 554 '*subnet-mask': 'str', 555 '*isolated': 'bool', 556 '*net-uuid': 'str' }, 557 'if': 'CONFIG_VMNET' } 558 559## 560# @NetdevVmnetSharedOptions: 561# 562# vmnet (shared mode) network backend. 563# 564# Allows traffic originating from the vmnet interface to reach the 565# Internet through a network address translator (NAT). The vmnet 566# interface can communicate with the host and with other shared mode 567# interfaces on the same subnet. If no DHCP settings, subnet mask and 568# IPv6 prefix specified, the interface can communicate with any of 569# other interfaces in shared mode. 570# 571# @start-address: The starting IPv4 address to use for the interface. 572# Must be in the private IP range (RFC 1918). Must be specified 573# along with @end-address and @subnet-mask. This address is used 574# as the gateway address. The subsequent address up to and 575# including end-address are placed in the DHCP pool. 576# 577# @end-address: The DHCP IPv4 range end address to use for the 578# interface. Must be in the private IP range (RFC 1918). Must be 579# specified along with @start-address and @subnet-mask. 580# 581# @subnet-mask: The IPv4 subnet mask to use on the interface. Must be 582# specified along with @start-address and @subnet-mask. 583# 584# @isolated: Enable isolation for this interface. Interface isolation 585# ensures that vmnet interface is not able to communicate with any 586# other vmnet interfaces. Only communication with host is 587# allowed. Requires at least macOS Big Sur 11.0. 588# 589# @nat66-prefix: The IPv6 prefix to use into guest network. Must be a 590# unique local address i.e. start with fd00::/8 and have length of 591# 64. 592# 593# Since: 7.1 594## 595{ 'struct': 'NetdevVmnetSharedOptions', 596 'data': { 597 '*start-address': 'str', 598 '*end-address': 'str', 599 '*subnet-mask': 'str', 600 '*isolated': 'bool', 601 '*nat66-prefix': 'str' }, 602 'if': 'CONFIG_VMNET' } 603 604## 605# @NetdevVmnetBridgedOptions: 606# 607# vmnet (bridged mode) network backend. 608# 609# Bridges the vmnet interface with a physical network interface. 610# 611# @ifname: The name of the physical interface to be bridged. 612# 613# @isolated: Enable isolation for this interface. Interface isolation 614# ensures that vmnet interface is not able to communicate with any 615# other vmnet interfaces. Only communication with host is 616# allowed. Requires at least macOS Big Sur 11.0. 617# 618# Since: 7.1 619## 620{ 'struct': 'NetdevVmnetBridgedOptions', 621 'data': { 622 'ifname': 'str', 623 '*isolated': 'bool' }, 624 'if': 'CONFIG_VMNET' } 625 626## 627# @NetdevStreamOptions: 628# 629# Configuration info for stream socket netdev 630# 631# @addr: socket address to listen on (server=true) or connect to 632# (server=false) 633# 634# @server: create server socket (default: false) 635# 636# @reconnect: For a client socket, if a socket is disconnected, then 637# attempt a reconnect after the given number of seconds. Setting 638# this to zero disables this function. (default: 0) (since 8.0) 639# 640# Only SocketAddress types 'unix', 'inet' and 'fd' are supported. 641# 642# Since: 7.2 643## 644{ 'struct': 'NetdevStreamOptions', 645 'data': { 646 'addr': 'SocketAddress', 647 '*server': 'bool', 648 '*reconnect': 'uint32' } } 649 650## 651# @NetdevDgramOptions: 652# 653# Configuration info for datagram socket netdev. 654# 655# @remote: remote address 656# 657# @local: local address 658# 659# Only SocketAddress types 'unix', 'inet' and 'fd' are supported. 660# 661# If remote address is present and it's a multicast address, local 662# address is optional. Otherwise local address is required and remote 663# address is optional. 664# 665# .. table:: Valid parameters combination table 666# :widths: auto 667# 668# ============= ======== ===== 669# remote local okay? 670# ============= ======== ===== 671# absent absent no 672# absent not fd no 673# absent fd yes 674# multicast absent yes 675# multicast present yes 676# not multicast absent no 677# not multicast present yes 678# ============= ======== ===== 679# 680# Since: 7.2 681## 682{ 'struct': 'NetdevDgramOptions', 683 'data': { 684 '*local': 'SocketAddress', 685 '*remote': 'SocketAddress' } } 686 687## 688# @NetClientDriver: 689# 690# Available netdev drivers. 691# 692# @l2tpv3: since 2.1 693# @vhost-vdpa: since 5.1 694# @vmnet-host: since 7.1 695# @vmnet-shared: since 7.1 696# @vmnet-bridged: since 7.1 697# @stream: since 7.2 698# @dgram: since 7.2 699# @af-xdp: since 8.2 700# 701# Since: 2.7 702## 703{ 'enum': 'NetClientDriver', 704 'data': [ 'none', 'nic', 'user', 'tap', 'l2tpv3', 'socket', 'stream', 705 'dgram', 'vde', 'bridge', 'hubport', 'netmap', 'vhost-user', 706 'vhost-vdpa', 707 { 'name': 'af-xdp', 'if': 'CONFIG_AF_XDP' }, 708 { 'name': 'vmnet-host', 'if': 'CONFIG_VMNET' }, 709 { 'name': 'vmnet-shared', 'if': 'CONFIG_VMNET' }, 710 { 'name': 'vmnet-bridged', 'if': 'CONFIG_VMNET' }] } 711 712## 713# @Netdev: 714# 715# Captures the configuration of a network device. 716# 717# @id: identifier for monitor commands. 718# 719# @type: Specify the driver used for interpreting remaining arguments. 720# 721# Since: 1.2 722## 723{ 'union': 'Netdev', 724 'base': { 'id': 'str', 'type': 'NetClientDriver' }, 725 'discriminator': 'type', 726 'data': { 727 'nic': 'NetLegacyNicOptions', 728 'user': 'NetdevUserOptions', 729 'tap': 'NetdevTapOptions', 730 'l2tpv3': 'NetdevL2TPv3Options', 731 'socket': 'NetdevSocketOptions', 732 'stream': 'NetdevStreamOptions', 733 'dgram': 'NetdevDgramOptions', 734 'vde': 'NetdevVdeOptions', 735 'bridge': 'NetdevBridgeOptions', 736 'hubport': 'NetdevHubPortOptions', 737 'netmap': 'NetdevNetmapOptions', 738 'af-xdp': { 'type': 'NetdevAFXDPOptions', 739 'if': 'CONFIG_AF_XDP' }, 740 'vhost-user': 'NetdevVhostUserOptions', 741 'vhost-vdpa': 'NetdevVhostVDPAOptions', 742 'vmnet-host': { 'type': 'NetdevVmnetHostOptions', 743 'if': 'CONFIG_VMNET' }, 744 'vmnet-shared': { 'type': 'NetdevVmnetSharedOptions', 745 'if': 'CONFIG_VMNET' }, 746 'vmnet-bridged': { 'type': 'NetdevVmnetBridgedOptions', 747 'if': 'CONFIG_VMNET' } } } 748 749## 750# @RxState: 751# 752# Packets receiving state 753# 754# @normal: filter assigned packets according to the mac-table 755# 756# @none: don't receive any assigned packet 757# 758# @all: receive all assigned packets 759# 760# Since: 1.6 761## 762{ 'enum': 'RxState', 'data': [ 'normal', 'none', 'all' ] } 763 764## 765# @RxFilterInfo: 766# 767# Rx-filter information for a NIC. 768# 769# @name: net client name 770# 771# @promiscuous: whether promiscuous mode is enabled 772# 773# @multicast: multicast receive state 774# 775# @unicast: unicast receive state 776# 777# @vlan: vlan receive state (Since 2.0) 778# 779# @broadcast-allowed: whether to receive broadcast 780# 781# @multicast-overflow: multicast table is overflowed or not 782# 783# @unicast-overflow: unicast table is overflowed or not 784# 785# @main-mac: the main macaddr string 786# 787# @vlan-table: a list of active vlan id 788# 789# @unicast-table: a list of unicast macaddr string 790# 791# @multicast-table: a list of multicast macaddr string 792# 793# Since: 1.6 794## 795{ 'struct': 'RxFilterInfo', 796 'data': { 797 'name': 'str', 798 'promiscuous': 'bool', 799 'multicast': 'RxState', 800 'unicast': 'RxState', 801 'vlan': 'RxState', 802 'broadcast-allowed': 'bool', 803 'multicast-overflow': 'bool', 804 'unicast-overflow': 'bool', 805 'main-mac': 'str', 806 'vlan-table': ['int'], 807 'unicast-table': ['str'], 808 'multicast-table': ['str'] }} 809 810## 811# @query-rx-filter: 812# 813# Return rx-filter information for all NICs (or for the given NIC). 814# 815# @name: net client name 816# 817# Returns: list of @RxFilterInfo for all NICs (or for the given NIC). 818# Returns an error if the given @name doesn't exist, or given NIC 819# doesn't support rx-filter querying, or given net client isn't a 820# NIC. 821# 822# Since: 1.6 823# 824# Example: 825# 826# -> { "execute": "query-rx-filter", "arguments": { "name": "vnet0" } } 827# <- { "return": [ 828# { 829# "promiscuous": true, 830# "name": "vnet0", 831# "main-mac": "52:54:00:12:34:56", 832# "unicast": "normal", 833# "vlan": "normal", 834# "vlan-table": [ 835# 4, 836# 0 837# ], 838# "unicast-table": [ 839# ], 840# "multicast": "normal", 841# "multicast-overflow": false, 842# "unicast-overflow": false, 843# "multicast-table": [ 844# "01:00:5e:00:00:01", 845# "33:33:00:00:00:01", 846# "33:33:ff:12:34:56" 847# ], 848# "broadcast-allowed": false 849# } 850# ] 851# } 852## 853{ 'command': 'query-rx-filter', 854 'data': { '*name': 'str' }, 855 'returns': ['RxFilterInfo'] } 856 857## 858# @NIC_RX_FILTER_CHANGED: 859# 860# Emitted once until the 'query-rx-filter' command is executed, the 861# first event will always be emitted 862# 863# @name: net client name 864# 865# @path: device path 866# 867# Since: 1.6 868# 869# Example: 870# 871# <- { "event": "NIC_RX_FILTER_CHANGED", 872# "data": { "name": "vnet0", 873# "path": "/machine/peripheral/vnet0/virtio-backend" }, 874# "timestamp": { "seconds": 1368697518, "microseconds": 326866 } } 875## 876{ 'event': 'NIC_RX_FILTER_CHANGED', 877 'data': { '*name': 'str', 'path': 'str' } } 878 879## 880# @AnnounceParameters: 881# 882# Parameters for self-announce timers 883# 884# @initial: Initial delay (in ms) before sending the first GARP/RARP 885# announcement 886# 887# @max: Maximum delay (in ms) between GARP/RARP announcement packets 888# 889# @rounds: Number of self-announcement attempts 890# 891# @step: Delay increase (in ms) after each self-announcement attempt 892# 893# @interfaces: An optional list of interface names, which restricts 894# the announcement to the listed interfaces. (Since 4.1) 895# 896# @id: A name to be used to identify an instance of announce-timers 897# and to allow it to modified later. Not for use as part of the 898# migration parameters. (Since 4.1) 899# 900# Since: 4.0 901## 902 903{ 'struct': 'AnnounceParameters', 904 'data': { 'initial': 'int', 905 'max': 'int', 906 'rounds': 'int', 907 'step': 'int', 908 '*interfaces': ['str'], 909 '*id' : 'str' } } 910 911## 912# @announce-self: 913# 914# Trigger generation of broadcast RARP frames to update network 915# switches. This can be useful when network bonds fail-over the 916# active slave. 917# 918# Example: 919# 920# -> { "execute": "announce-self", 921# "arguments": { 922# "initial": 50, "max": 550, "rounds": 10, "step": 50, 923# "interfaces": ["vn2", "vn3"], "id": "bob" } } 924# <- { "return": {} } 925# 926# Since: 4.0 927## 928{ 'command': 'announce-self', 'boxed': true, 929 'data' : 'AnnounceParameters'} 930 931## 932# @FAILOVER_NEGOTIATED: 933# 934# Emitted when VIRTIO_NET_F_STANDBY was enabled during feature 935# negotiation. Failover primary devices which were hidden (not 936# hotplugged when requested) before will now be hotplugged by the 937# virtio-net standby device. 938# 939# @device-id: QEMU device id of the unplugged device 940# 941# Since: 4.2 942# 943# Example: 944# 945# <- { "event": "FAILOVER_NEGOTIATED", 946# "data": { "device-id": "net1" }, 947# "timestamp": { "seconds": 1368697518, "microseconds": 326866 } } 948## 949{ 'event': 'FAILOVER_NEGOTIATED', 950 'data': {'device-id': 'str'} } 951 952## 953# @NETDEV_STREAM_CONNECTED: 954# 955# Emitted when the netdev stream backend is connected 956# 957# @netdev-id: QEMU netdev id that is connected 958# 959# @addr: The destination address 960# 961# Since: 7.2 962# 963# Examples: 964# 965# <- { "event": "NETDEV_STREAM_CONNECTED", 966# "data": { "netdev-id": "netdev0", 967# "addr": { "port": "47666", "ipv6": true, 968# "host": "::1", "type": "inet" } }, 969# "timestamp": { "seconds": 1666269863, "microseconds": 311222 } } 970# 971# <- { "event": "NETDEV_STREAM_CONNECTED", 972# "data": { "netdev-id": "netdev0", 973# "addr": { "path": "/tmp/qemu0", "type": "unix" } }, 974# "timestamp": { "seconds": 1666269706, "microseconds": 413651 } } 975## 976{ 'event': 'NETDEV_STREAM_CONNECTED', 977 'data': { 'netdev-id': 'str', 978 'addr': 'SocketAddress' } } 979 980## 981# @NETDEV_STREAM_DISCONNECTED: 982# 983# Emitted when the netdev stream backend is disconnected 984# 985# @netdev-id: QEMU netdev id that is disconnected 986# 987# Since: 7.2 988# 989# Example: 990# 991# <- { 'event': 'NETDEV_STREAM_DISCONNECTED', 992# 'data': {'netdev-id': 'netdev0'}, 993# 'timestamp': {'seconds': 1663330937, 'microseconds': 526695} } 994## 995{ 'event': 'NETDEV_STREAM_DISCONNECTED', 996 'data': { 'netdev-id': 'str' } } 997