qemu/qapi/block-export.json

# -*- Mode: Python -*-
# vim: filetype=python

##
# == Block device exports
##

{ 'include': 'sockets.json' }

##
# @NbdServerOptions:
#
# Keep this type consistent with the nbd-server-start arguments. The only
# intended difference is using SocketAddress instead of SocketAddressLegacy.
#
# @addr: Address on which to listen.
# @tls-creds: ID of the TLS credentials object (since 2.6).
# @tls-authz: ID of the QAuthZ authorization object used to validate
#             the client's x509 distinguished name. This object is
#             is only resolved at time of use, so can be deleted and
#             recreated on the fly while the NBD server is active.
#             If missing, it will default to denying access (since 4.0).
# @max-connections: The maximum number of connections to allow at the same
#                   time, 0 for unlimited. (since 5.2; default: 0)
#
# Since: 4.2
##
{ 'struct': 'NbdServerOptions',
  'data': { 'addr': 'SocketAddress',
            '*tls-creds': 'str',
            '*tls-authz': 'str',
            '*max-connections': 'uint32' } }

##
# @nbd-server-start:
#
# Start an NBD server listening on the given host and port.  Block
# devices can then be exported using @nbd-server-add.  The NBD
# server will present them as named exports; for example, another
# QEMU instance could refer to them as "nbd:HOST:PORT:exportname=NAME".
#
# Keep this type consistent with the NbdServerOptions type. The only intended
# difference is using SocketAddressLegacy instead of SocketAddress.
#
# @addr: Address on which to listen.
# @tls-creds: ID of the TLS credentials object (since 2.6).
# @tls-authz: ID of the QAuthZ authorization object used to validate
#             the client's x509 distinguished name. This object is
#             is only resolved at time of use, so can be deleted and
#             recreated on the fly while the NBD server is active.
#             If missing, it will default to denying access (since 4.0).
# @max-connections: The maximum number of connections to allow at the same
#                   time, 0 for unlimited. (since 5.2; default: 0)
#
# Returns: error if the server is already running.
#
# Since: 1.3
##
{ 'command': 'nbd-server-start',
  'data': { 'addr': 'SocketAddressLegacy',
            '*tls-creds': 'str',
            '*tls-authz': 'str',
            '*max-connections': 'uint32' } }

##
# @BlockExportOptionsNbdBase:
#
# An NBD block export (common options shared between nbd-server-add and
# the NBD branch of block-export-add).
#
# @name: Export name. If unspecified, the @device parameter is used as the
#        export name. (Since 2.12)
#
# @description: Free-form description of the export, up to 4096 bytes.
#               (Since 5.0)
#
# Since: 5.0
##
{ 'struct': 'BlockExportOptionsNbdBase',
  'data': { '*name': 'str', '*description': 'str' } }

##
# @BlockExportOptionsNbd:
#
# An NBD block export (distinct options used in the NBD branch of
# block-export-add).
#
# @bitmaps: Also export each of the named dirty bitmaps reachable from
#           @device, so the NBD client can use NBD_OPT_SET_META_CONTEXT with
#           the metadata context name "qemu:dirty-bitmap:BITMAP" to inspect
#           each bitmap.
#
# @allocation-depth: Also export the allocation depth map for @device, so
#                    the NBD client can use NBD_OPT_SET_META_CONTEXT with
#                    the metadata context name "qemu:allocation-depth" to
#                    inspect allocation details. (since 5.2)
#
# Since: 5.2
##
{ 'struct': 'BlockExportOptionsNbd',
  'base': 'BlockExportOptionsNbdBase',
  'data': { '*bitmaps': ['str'], '*allocation-depth': 'bool' } }

##
# @BlockExportOptionsVhostUserBlk:
#
# A vhost-user-blk block export.
#
# @addr: The vhost-user socket on which to listen. Both 'unix' and 'fd'
#        SocketAddress types are supported. Passed fds must be UNIX domain
#        sockets.
# @logical-block-size: Logical block size in bytes. Defaults to 512 bytes.
# @num-queues: Number of request virtqueues. Must be greater than 0. Defaults
#              to 1.
#
# Since: 5.2
##
{ 'struct': 'BlockExportOptionsVhostUserBlk',
  'data': { 'addr': 'SocketAddress',
	    '*logical-block-size': 'size',
            '*num-queues': 'uint16'} }

##
# @FuseExportAllowOther:
#
# Possible allow_other modes for FUSE exports.
#
# @off: Do not pass allow_other as a mount option.
#
# @on: Pass allow_other as a mount option.
#
# @auto: Try mounting with allow_other first, and if that fails, retry
#        without allow_other.
#
# Since: 6.1
##
{ 'enum': 'FuseExportAllowOther',
  'data': ['off', 'on', 'auto'] }

##
# @BlockExportOptionsFuse:
#
# Options for exporting a block graph node on some (file) mountpoint
# as a raw image.
#
# @mountpoint: Path on which to export the block device via FUSE.
#              This must point to an existing regular file.
#
# @growable: Whether writes beyond the EOF should grow the block node
#            accordingly. (default: false)
#
# @allow-other: If this is off, only qemu's user is allowed access to
#               this export.  That cannot be changed even with chmod or
#               chown.
#               Enabling this option will allow other users access to
#               the export with the FUSE mount option "allow_other".
#               Note that using allow_other as a non-root user requires
#               user_allow_other to be enabled in the global fuse.conf
#               configuration file.
#               In auto mode (the default), the FUSE export driver will
#               first attempt to mount the export with allow_other, and
#               if that fails, try again without.
#               (since 6.1; default: auto)
#
# Since: 6.0
##
{ 'struct': 'BlockExportOptionsFuse',
  'data': { 'mountpoint': 'str',
            '*growable': 'bool',
            '*allow-other': 'FuseExportAllowOther' },
  'if': 'defined(CONFIG_FUSE)' }

##
# @NbdServerAddOptions:
#
# An NBD block export, per legacy nbd-server-add command.
#
# @device: The device name or node name of the node to be exported
#
# @writable: Whether clients should be able to write to the device via the
#            NBD connection (default false).
#
# @bitmap: Also export a single dirty bitmap reachable from @device, so the
#          NBD client can use NBD_OPT_SET_META_CONTEXT with the metadata
#          context name "qemu:dirty-bitmap:BITMAP" to inspect the bitmap
#          (since 4.0).
#
# Since: 5.0
##
{ 'struct': 'NbdServerAddOptions',
  'base': 'BlockExportOptionsNbdBase',
  'data': { 'device': 'str',
            '*writable': 'bool', '*bitmap': 'str' } }

##
# @nbd-server-add:
#
# Export a block node to QEMU's embedded NBD server.
#
# The export name will be used as the id for the resulting block export.
#
# Features:
# @deprecated: This command is deprecated. Use @block-export-add instead.
#
# Returns: error if the server is not running, or export with the same name
#          already exists.
#
# Since: 1.3
##
{ 'command': 'nbd-server-add',
  'data': 'NbdServerAddOptions', 'boxed': true, 'features': ['deprecated'] }

##
# @BlockExportRemoveMode:
#
# Mode for removing a block export.
#
# @safe: Remove export if there are no existing connections, fail otherwise.
#
# @hard: Drop all connections immediately and remove export.
#
# Potential additional modes to be added in the future:
#
# hide: Just hide export from new clients, leave existing connections as is.
# Remove export after all clients are disconnected.
#
# soft: Hide export from new clients, answer with ESHUTDOWN for all further
# requests from existing clients.
#
# Since: 2.12
##
{'enum': 'BlockExportRemoveMode', 'data': ['safe', 'hard']}

##
# @nbd-server-remove:
#
# Remove NBD export by name.
#
# @name: Block export id.
#
# @mode: Mode of command operation. See @BlockExportRemoveMode description.
#        Default is 'safe'.
#
# Features:
# @deprecated: This command is deprecated. Use @block-export-del instead.
#
# Returns: error if
#            - the server is not running
#            - export is not found
#            - mode is 'safe' and there are existing connections
#
# Since: 2.12
##
{ 'command': 'nbd-server-remove',
  'data': {'name': 'str', '*mode': 'BlockExportRemoveMode'},
  'features': ['deprecated'] }

##
# @nbd-server-stop:
#
# Stop QEMU's embedded NBD server, and unregister all devices previously
# added via @nbd-server-add.
#
# Since: 1.3
##
{ 'command': 'nbd-server-stop' }

##
# @BlockExportType:
#
# An enumeration of block export types
#
# @nbd: NBD export
# @vhost-user-blk: vhost-user-blk export (since 5.2)
# @fuse: FUSE export (since: 6.0)
#
# Since: 4.2
##
{ 'enum': 'BlockExportType',
  'data': [ 'nbd', 'vhost-user-blk',
            { 'name': 'fuse', 'if': 'defined(CONFIG_FUSE)' } ] }

##
# @BlockExportOptions:
#
# Describes a block export, i.e. how single node should be exported on an
# external interface.
#
# @id: A unique identifier for the block export (across all export types)
#
# @node-name: The node name of the block node to be exported (since: 5.2)
#
# @writable: True if clients should be able to write to the export
#            (default false)
#
# @writethrough: If true, caches are flushed after every write request to the
#                export before completion is signalled. (since: 5.2;
#                default: false)
#
# @iothread: The name of the iothread object where the export will run. The
#            default is to use the thread currently associated with the
#            block node. (since: 5.2)
#
# @fixed-iothread: True prevents the block node from being moved to another
#                  thread while the export is active. If true and @iothread is
#                  given, export creation fails if the block node cannot be
#                  moved to the iothread. The default is false. (since: 5.2)
#
# Since: 4.2
##
{ 'union': 'BlockExportOptions',
  'base': { 'type': 'BlockExportType',
            'id': 'str',
            '*fixed-iothread': 'bool',
            '*iothread': 'str',
            'node-name': 'str',
            '*writable': 'bool',
            '*writethrough': 'bool' },
  'discriminator': 'type',
  'data': {
      'nbd': 'BlockExportOptionsNbd',
      'vhost-user-blk': 'BlockExportOptionsVhostUserBlk',
      'fuse': { 'type': 'BlockExportOptionsFuse',
                'if': 'defined(CONFIG_FUSE)' }
   } }

##
# @block-export-add:
#
# Creates a new block export.
#
# Since: 5.2
##
{ 'command': 'block-export-add',
  'data': 'BlockExportOptions', 'boxed': true }

##
# @block-export-del:
#
# Request to remove a block export. This drops the user's reference to the
# export, but the export may still stay around after this command returns until
# the shutdown of the export has completed.
#
# @id: Block export id.
#
# @mode: Mode of command operation. See @BlockExportRemoveMode description.
#        Default is 'safe'.
#
# Returns: Error if the export is not found or @mode is 'safe' and the export
#          is still in use (e.g. by existing client connections)
#
# Since: 5.2
##
{ 'command': 'block-export-del',
  'data': { 'id': 'str', '*mode': 'BlockExportRemoveMode' } }

##
# @BLOCK_EXPORT_DELETED:
#
# Emitted when a block export is removed and its id can be reused.
#
# @id: Block export id.
#
# Since: 5.2
##
{ 'event': 'BLOCK_EXPORT_DELETED',
  'data': { 'id': 'str' } }

##
# @BlockExportInfo:
#
# Information about a single block export.
#
# @id: The unique identifier for the block export
#
# @type: The block export type
#
# @node-name: The node name of the block node that is exported
#
# @shutting-down: True if the export is shutting down (e.g. after a
#                 block-export-del command, but before the shutdown has
#                 completed)
#
# Since:  5.2
##
{ 'struct': 'BlockExportInfo',
  'data': { 'id': 'str',
            'type': 'BlockExportType',
            'node-name': 'str',
            'shutting-down': 'bool' } }

##
# @query-block-exports:
#
# Returns: A list of BlockExportInfo describing all block exports
#
# Since: 5.2
##
{ 'command': 'query-block-exports', 'returns': ['BlockExportInfo'] }