xref: /openbmc/qemu/pc-bios/s390-ccw/virtio.c (revision a719a27c)
1 /*
2  * Virtio driver bits
3  *
4  * Copyright (c) 2013 Alexander Graf <agraf@suse.de>
5  *
6  * This work is licensed under the terms of the GNU GPL, version 2 or (at
7  * your option) any later version. See the COPYING file in the top-level
8  * directory.
9  */
10 
11 #include "s390-ccw.h"
12 #include "virtio.h"
13 
14 struct vring block;
15 
16 static char chsc_page[PAGE_SIZE] __attribute__((__aligned__(PAGE_SIZE)));
17 
18 static long kvm_hypercall(unsigned long nr, unsigned long param1,
19                           unsigned long param2)
20 {
21 	register ulong r_nr asm("1") = nr;
22 	register ulong r_param1 asm("2") = param1;
23 	register ulong r_param2 asm("3") = param2;
24 	register long retval asm("2");
25 
26 	asm volatile ("diag 2,4,0x500"
27 		      : "=d" (retval)
28 		      : "d" (r_nr), "0" (r_param1), "r"(r_param2)
29 		      : "memory", "cc");
30 
31 	return retval;
32 }
33 
34 static void virtio_notify(struct subchannel_id schid)
35 {
36     kvm_hypercall(KVM_S390_VIRTIO_CCW_NOTIFY, *(u32*)&schid, 0);
37 }
38 
39 /***********************************************
40  *             Virtio functions                *
41  ***********************************************/
42 
43 static int drain_irqs(struct subchannel_id schid)
44 {
45     struct irb irb = {};
46     int r = 0;
47 
48     while (1) {
49         /* FIXME: make use of TPI, for that enable subchannel and isc */
50         if (tsch(schid, &irb)) {
51             /* Might want to differentiate error codes later on. */
52             if (irb.scsw.cstat) {
53                 r = -EIO;
54             } else if (irb.scsw.dstat != 0xc) {
55                 r = -EIO;
56             }
57             return r;
58         }
59     }
60 }
61 
62 static int run_ccw(struct subchannel_id schid, int cmd, void *ptr, int len)
63 {
64     struct ccw1 ccw = {};
65     struct cmd_orb orb = {};
66     struct schib schib;
67     int r;
68 
69     /* start command processing */
70     stsch_err(schid, &schib);
71     schib.scsw.ctrl = SCSW_FCTL_START_FUNC;
72     msch(schid, &schib);
73 
74     /* start subchannel command */
75     orb.fmt = 1;
76     orb.cpa = (u32)(long)&ccw;
77     orb.lpm = 0x80;
78 
79     ccw.cmd_code = cmd;
80     ccw.cda = (long)ptr;
81     ccw.count = len;
82 
83     r = ssch(schid, &orb);
84     /*
85      * XXX Wait until device is done processing the CCW. For now we can
86      *     assume that a simple tsch will have finished the CCW processing,
87      *     but the architecture allows for asynchronous operation
88      */
89     if (!r) {
90         r = drain_irqs(schid);
91     }
92     return r;
93 }
94 
95 static void virtio_set_status(struct subchannel_id schid,
96                               unsigned long dev_addr)
97 {
98     unsigned char status = dev_addr;
99     if (run_ccw(schid, CCW_CMD_WRITE_STATUS, &status, sizeof(status))) {
100         virtio_panic("Could not write status to host!\n");
101     }
102 }
103 
104 static void virtio_reset(struct subchannel_id schid)
105 {
106     run_ccw(schid, CCW_CMD_VDEV_RESET, NULL, 0);
107 }
108 
109 static void vring_init(struct vring *vr, unsigned int num, void *p,
110                        unsigned long align)
111 {
112     debug_print_addr("init p", p);
113     vr->num = num;
114     vr->desc = p;
115     vr->avail = p + num*sizeof(struct vring_desc);
116     vr->used = (void *)(((unsigned long)&vr->avail->ring[num] + align-1)
117                 & ~(align - 1));
118 
119     /* Zero out all relevant field */
120     vr->avail->flags = 0;
121     vr->avail->idx = 0;
122 
123     /* We're running with interrupts off anyways, so don't bother */
124     vr->used->flags = VRING_USED_F_NO_NOTIFY;
125     vr->used->idx = 0;
126     vr->used_idx = 0;
127     vr->next_idx = 0;
128 
129     debug_print_addr("init vr", vr);
130 }
131 
132 static void vring_notify(struct subchannel_id schid)
133 {
134     virtio_notify(schid);
135 }
136 
137 static void vring_send_buf(struct vring *vr, void *p, int len, int flags)
138 {
139     /* For follow-up chains we need to keep the first entry point */
140     if (!(flags & VRING_HIDDEN_IS_CHAIN)) {
141         vr->avail->ring[vr->avail->idx % vr->num] = vr->next_idx;
142     }
143 
144     vr->desc[vr->next_idx].addr = (ulong)p;
145     vr->desc[vr->next_idx].len = len;
146     vr->desc[vr->next_idx].flags = flags & ~VRING_HIDDEN_IS_CHAIN;
147     vr->desc[vr->next_idx].next = vr->next_idx;
148     vr->desc[vr->next_idx].next++;
149     vr->next_idx++;
150 
151     /* Chains only have a single ID */
152     if (!(flags & VRING_DESC_F_NEXT)) {
153         vr->avail->idx++;
154     }
155 }
156 
157 static u64 get_clock(void)
158 {
159     u64 r;
160 
161     asm volatile("stck %0" : "=Q" (r) : : "cc");
162     return r;
163 }
164 
165 static ulong get_second(void)
166 {
167     return (get_clock() >> 12) / 1000000;
168 }
169 
170 /*
171  * Wait for the host to reply.
172  *
173  * timeout is in seconds if > 0.
174  *
175  * Returns 0 on success, 1 on timeout.
176  */
177 static int vring_wait_reply(struct vring *vr, int timeout)
178 {
179     ulong target_second = get_second() + timeout;
180     struct subchannel_id schid = vr->schid;
181     int r = 0;
182 
183     /* Wait until the used index has moved. */
184     while (vr->used->idx == vr->used_idx) {
185         vring_notify(schid);
186         if (timeout && (get_second() >= target_second)) {
187             r = 1;
188             break;
189         }
190         yield();
191     }
192 
193     vr->used_idx = vr->used->idx;
194     vr->next_idx = 0;
195     vr->desc[0].len = 0;
196     vr->desc[0].flags = 0;
197 
198     return r;
199 }
200 
201 /***********************************************
202  *               Virtio block                  *
203  ***********************************************/
204 
205 static int virtio_read_many(ulong sector, void *load_addr, int sec_num)
206 {
207     struct virtio_blk_outhdr out_hdr;
208     u8 status;
209     int r;
210 
211     /* Tell the host we want to read */
212     out_hdr.type = VIRTIO_BLK_T_IN;
213     out_hdr.ioprio = 99;
214     out_hdr.sector = sector;
215 
216     vring_send_buf(&block, &out_hdr, sizeof(out_hdr), VRING_DESC_F_NEXT);
217 
218     /* This is where we want to receive data */
219     vring_send_buf(&block, load_addr, SECTOR_SIZE * sec_num,
220                    VRING_DESC_F_WRITE | VRING_HIDDEN_IS_CHAIN |
221                    VRING_DESC_F_NEXT);
222 
223     /* status field */
224     vring_send_buf(&block, &status, sizeof(u8), VRING_DESC_F_WRITE |
225                    VRING_HIDDEN_IS_CHAIN);
226 
227     /* Now we can tell the host to read */
228     vring_wait_reply(&block, 0);
229 
230     r = drain_irqs(block.schid);
231     if (r) {
232         /* Well, whatever status is supposed to contain... */
233         status = 1;
234     }
235     return status;
236 }
237 
238 unsigned long virtio_load_direct(ulong rec_list1, ulong rec_list2,
239 				 ulong subchan_id, void *load_addr)
240 {
241     u8 status;
242     int sec = rec_list1;
243     int sec_num = (((rec_list2 >> 32)+ 1) & 0xffff);
244     int sec_len = rec_list2 >> 48;
245     ulong addr = (ulong)load_addr;
246 
247     if (sec_len != SECTOR_SIZE) {
248         return -1;
249     }
250 
251     sclp_print(".");
252     status = virtio_read_many(sec, (void*)addr, sec_num);
253     if (status) {
254         virtio_panic("I/O Error");
255     }
256     addr += sec_num * SECTOR_SIZE;
257 
258     return addr;
259 }
260 
261 int virtio_read(ulong sector, void *load_addr)
262 {
263     return virtio_read_many(sector, load_addr, 1);
264 }
265 
266 void virtio_setup_block(struct subchannel_id schid)
267 {
268     struct vq_info_block info;
269     struct vq_config_block config = {};
270 
271     virtio_reset(schid);
272 
273     config.index = 0;
274     if (run_ccw(schid, CCW_CMD_READ_VQ_CONF, &config, sizeof(config))) {
275         virtio_panic("Could not get block device configuration\n");
276     }
277     vring_init(&block, config.num, (void*)(100 * 1024 * 1024),
278                KVM_S390_VIRTIO_RING_ALIGN);
279 
280     info.queue = (100ULL * 1024ULL* 1024ULL);
281     info.align = KVM_S390_VIRTIO_RING_ALIGN;
282     info.index = 0;
283     info.num = config.num;
284     block.schid = schid;
285 
286     if (!run_ccw(schid, CCW_CMD_SET_VQ, &info, sizeof(info))) {
287         virtio_set_status(schid, VIRTIO_CONFIG_S_DRIVER_OK);
288     }
289 }
290 
291 bool virtio_is_blk(struct subchannel_id schid)
292 {
293     int r;
294     struct senseid senseid = {};
295 
296     /* run sense id command */
297     r = run_ccw(schid, CCW_CMD_SENSE_ID, &senseid, sizeof(senseid));
298     if (r) {
299         return false;
300     }
301     if ((senseid.cu_type != 0x3832) || (senseid.cu_model != VIRTIO_ID_BLOCK)) {
302         return false;
303     }
304 
305     return true;
306 }
307 
308 int enable_mss_facility(void)
309 {
310     int ret;
311     struct chsc_area_sda *sda_area = (struct chsc_area_sda *) chsc_page;
312 
313     memset(sda_area, 0, PAGE_SIZE);
314     sda_area->request.length = 0x0400;
315     sda_area->request.code = 0x0031;
316     sda_area->operation_code = 0x2;
317 
318     ret = chsc(sda_area);
319     if ((ret == 0) && (sda_area->response.code == 0x0001)) {
320         return 0;
321     }
322     return -EIO;
323 }
324