1 #ifndef QEMU_H 2 #define QEMU_H 3 4 #include "cpu.h" 5 #include "exec/cpu_ldst.h" 6 7 #undef DEBUG_REMAP 8 9 #include "exec/user/abitypes.h" 10 11 #include "syscall_defs.h" 12 #include "target_syscall.h" 13 14 /* 15 * This is the size of the host kernel's sigset_t, needed where we make 16 * direct system calls that take a sigset_t pointer and a size. 17 */ 18 #define SIGSET_T_SIZE (_NSIG / 8) 19 20 /* 21 * This struct is used to hold certain information about the image. 22 * Basically, it replicates in user space what would be certain 23 * task_struct fields in the kernel 24 */ 25 struct image_info { 26 abi_ulong load_bias; 27 abi_ulong load_addr; 28 abi_ulong start_code; 29 abi_ulong end_code; 30 abi_ulong start_data; 31 abi_ulong end_data; 32 abi_ulong brk; 33 abi_ulong start_stack; 34 abi_ulong stack_limit; 35 abi_ulong vdso; 36 abi_ulong entry; 37 abi_ulong code_offset; 38 abi_ulong data_offset; 39 abi_ulong saved_auxv; 40 abi_ulong auxv_len; 41 abi_ulong argc; 42 abi_ulong argv; 43 abi_ulong envc; 44 abi_ulong envp; 45 abi_ulong file_string; 46 uint32_t elf_flags; 47 int personality; 48 abi_ulong alignment; 49 bool exec_stack; 50 51 /* Generic semihosting knows about these pointers. */ 52 abi_ulong arg_strings; /* strings for argv */ 53 abi_ulong env_strings; /* strings for envp; ends arg_strings */ 54 55 /* The fields below are used in FDPIC mode. */ 56 abi_ulong loadmap_addr; 57 uint16_t nsegs; 58 void *loadsegs; 59 abi_ulong pt_dynamic_addr; 60 abi_ulong interpreter_loadmap_addr; 61 abi_ulong interpreter_pt_dynamic_addr; 62 struct image_info *other_info; 63 64 /* For target-specific processing of NT_GNU_PROPERTY_TYPE_0. */ 65 uint32_t note_flags; 66 67 #ifdef TARGET_MIPS 68 int fp_abi; 69 int interp_fp_abi; 70 #endif 71 }; 72 73 #ifdef TARGET_I386 74 /* Information about the current linux thread */ 75 struct vm86_saved_state { 76 uint32_t eax; /* return code */ 77 uint32_t ebx; 78 uint32_t ecx; 79 uint32_t edx; 80 uint32_t esi; 81 uint32_t edi; 82 uint32_t ebp; 83 uint32_t esp; 84 uint32_t eflags; 85 uint32_t eip; 86 uint16_t cs, ss, ds, es, fs, gs; 87 }; 88 #endif 89 90 #if defined(TARGET_ARM) && defined(TARGET_ABI32) 91 /* FPU emulator */ 92 #include "nwfpe/fpa11.h" 93 #endif 94 95 struct emulated_sigtable { 96 int pending; /* true if signal is pending */ 97 target_siginfo_t info; 98 }; 99 100 typedef struct TaskState { 101 pid_t ts_tid; /* tid (or pid) of this task */ 102 #ifdef TARGET_ARM 103 # ifdef TARGET_ABI32 104 /* FPA state */ 105 FPA11 fpa; 106 # endif 107 #endif 108 #if defined(TARGET_ARM) || defined(TARGET_RISCV) 109 int swi_errno; 110 #endif 111 #if defined(TARGET_I386) && !defined(TARGET_X86_64) 112 abi_ulong target_v86; 113 struct vm86_saved_state vm86_saved_regs; 114 struct target_vm86plus_struct vm86plus; 115 uint32_t v86flags; 116 uint32_t v86mask; 117 #endif 118 abi_ulong child_tidptr; 119 #ifdef TARGET_M68K 120 abi_ulong tp_value; 121 #endif 122 #if defined(TARGET_ARM) || defined(TARGET_M68K) || defined(TARGET_RISCV) 123 /* Extra fields for semihosted binaries. */ 124 abi_ulong heap_base; 125 abi_ulong heap_limit; 126 #endif 127 abi_ulong stack_base; 128 int used; /* non zero if used */ 129 struct image_info *info; 130 struct linux_binprm *bprm; 131 132 struct emulated_sigtable sync_signal; 133 struct emulated_sigtable sigtab[TARGET_NSIG]; 134 /* 135 * This thread's signal mask, as requested by the guest program. 136 * The actual signal mask of this thread may differ: 137 * + we don't let SIGSEGV and SIGBUS be blocked while running guest code 138 * + sometimes we block all signals to avoid races 139 */ 140 sigset_t signal_mask; 141 /* 142 * The signal mask imposed by a guest sigsuspend syscall, if we are 143 * currently in the middle of such a syscall 144 */ 145 sigset_t sigsuspend_mask; 146 /* Nonzero if we're leaving a sigsuspend and sigsuspend_mask is valid. */ 147 int in_sigsuspend; 148 149 /* 150 * Nonzero if process_pending_signals() needs to do something (either 151 * handle a pending signal or unblock signals). 152 * This flag is written from a signal handler so should be accessed via 153 * the qatomic_read() and qatomic_set() functions. (It is not accessed 154 * from multiple threads.) 155 */ 156 int signal_pending; 157 158 /* This thread's sigaltstack, if it has one */ 159 struct target_sigaltstack sigaltstack_used; 160 161 /* Start time of task after system boot in clock ticks */ 162 uint64_t start_boottime; 163 } TaskState; 164 165 static inline TaskState *get_task_state(CPUState *cs) 166 { 167 return cs->opaque; 168 } 169 170 abi_long do_brk(abi_ulong new_brk); 171 int do_guest_openat(CPUArchState *cpu_env, int dirfd, const char *pathname, 172 int flags, mode_t mode, bool safe); 173 ssize_t do_guest_readlink(const char *pathname, char *buf, size_t bufsiz); 174 175 /* user access */ 176 177 #define VERIFY_NONE 0 178 #define VERIFY_READ PAGE_READ 179 #define VERIFY_WRITE (PAGE_READ | PAGE_WRITE) 180 181 static inline bool access_ok_untagged(int type, abi_ulong addr, abi_ulong size) 182 { 183 if (size == 0 184 ? !guest_addr_valid_untagged(addr) 185 : !guest_range_valid_untagged(addr, size)) { 186 return false; 187 } 188 return page_check_range((target_ulong)addr, size, type); 189 } 190 191 static inline bool access_ok(CPUState *cpu, int type, 192 abi_ulong addr, abi_ulong size) 193 { 194 return access_ok_untagged(type, cpu_untagged_addr(cpu, addr), size); 195 } 196 197 /* NOTE __get_user and __put_user use host pointers and don't check access. 198 These are usually used to access struct data members once the struct has 199 been locked - usually with lock_user_struct. */ 200 201 /* 202 * Tricky points: 203 * - Use __builtin_choose_expr to avoid type promotion from ?:, 204 * - Invalid sizes result in a compile time error stemming from 205 * the fact that abort has no parameters. 206 * - It's easier to use the endian-specific unaligned load/store 207 * functions than host-endian unaligned load/store plus tswapN. 208 * - The pragmas are necessary only to silence a clang false-positive 209 * warning: see https://bugs.llvm.org/show_bug.cgi?id=39113 . 210 * - gcc has bugs in its _Pragma() support in some versions, eg 211 * https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83256 -- so we only 212 * include the warning-suppression pragmas for clang 213 */ 214 #if defined(__clang__) && __has_warning("-Waddress-of-packed-member") 215 #define PRAGMA_DISABLE_PACKED_WARNING \ 216 _Pragma("GCC diagnostic push"); \ 217 _Pragma("GCC diagnostic ignored \"-Waddress-of-packed-member\"") 218 219 #define PRAGMA_REENABLE_PACKED_WARNING \ 220 _Pragma("GCC diagnostic pop") 221 222 #else 223 #define PRAGMA_DISABLE_PACKED_WARNING 224 #define PRAGMA_REENABLE_PACKED_WARNING 225 #endif 226 227 #define __put_user_e(x, hptr, e) \ 228 do { \ 229 PRAGMA_DISABLE_PACKED_WARNING; \ 230 (__builtin_choose_expr(sizeof(*(hptr)) == 1, stb_p, \ 231 __builtin_choose_expr(sizeof(*(hptr)) == 2, stw_##e##_p, \ 232 __builtin_choose_expr(sizeof(*(hptr)) == 4, stl_##e##_p, \ 233 __builtin_choose_expr(sizeof(*(hptr)) == 8, stq_##e##_p, abort)))) \ 234 ((hptr), (x)), (void)0); \ 235 PRAGMA_REENABLE_PACKED_WARNING; \ 236 } while (0) 237 238 #define __get_user_e(x, hptr, e) \ 239 do { \ 240 PRAGMA_DISABLE_PACKED_WARNING; \ 241 ((x) = (typeof(*hptr))( \ 242 __builtin_choose_expr(sizeof(*(hptr)) == 1, ldub_p, \ 243 __builtin_choose_expr(sizeof(*(hptr)) == 2, lduw_##e##_p, \ 244 __builtin_choose_expr(sizeof(*(hptr)) == 4, ldl_##e##_p, \ 245 __builtin_choose_expr(sizeof(*(hptr)) == 8, ldq_##e##_p, abort)))) \ 246 (hptr)), (void)0); \ 247 PRAGMA_REENABLE_PACKED_WARNING; \ 248 } while (0) 249 250 251 #if TARGET_BIG_ENDIAN 252 # define __put_user(x, hptr) __put_user_e(x, hptr, be) 253 # define __get_user(x, hptr) __get_user_e(x, hptr, be) 254 #else 255 # define __put_user(x, hptr) __put_user_e(x, hptr, le) 256 # define __get_user(x, hptr) __get_user_e(x, hptr, le) 257 #endif 258 259 /* put_user()/get_user() take a guest address and check access */ 260 /* These are usually used to access an atomic data type, such as an int, 261 * that has been passed by address. These internally perform locking 262 * and unlocking on the data type. 263 */ 264 #define put_user(x, gaddr, target_type) \ 265 ({ \ 266 abi_ulong __gaddr = (gaddr); \ 267 target_type *__hptr; \ 268 abi_long __ret = 0; \ 269 if ((__hptr = lock_user(VERIFY_WRITE, __gaddr, sizeof(target_type), 0))) { \ 270 __put_user((x), __hptr); \ 271 unlock_user(__hptr, __gaddr, sizeof(target_type)); \ 272 } else \ 273 __ret = -TARGET_EFAULT; \ 274 __ret; \ 275 }) 276 277 #define get_user(x, gaddr, target_type) \ 278 ({ \ 279 abi_ulong __gaddr = (gaddr); \ 280 target_type *__hptr; \ 281 abi_long __ret = 0; \ 282 if ((__hptr = lock_user(VERIFY_READ, __gaddr, sizeof(target_type), 1))) { \ 283 __get_user((x), __hptr); \ 284 unlock_user(__hptr, __gaddr, 0); \ 285 } else { \ 286 /* avoid warning */ \ 287 (x) = 0; \ 288 __ret = -TARGET_EFAULT; \ 289 } \ 290 __ret; \ 291 }) 292 293 #define put_user_ual(x, gaddr) put_user((x), (gaddr), abi_ulong) 294 #define put_user_sal(x, gaddr) put_user((x), (gaddr), abi_long) 295 #define put_user_u64(x, gaddr) put_user((x), (gaddr), uint64_t) 296 #define put_user_s64(x, gaddr) put_user((x), (gaddr), int64_t) 297 #define put_user_u32(x, gaddr) put_user((x), (gaddr), uint32_t) 298 #define put_user_s32(x, gaddr) put_user((x), (gaddr), int32_t) 299 #define put_user_u16(x, gaddr) put_user((x), (gaddr), uint16_t) 300 #define put_user_s16(x, gaddr) put_user((x), (gaddr), int16_t) 301 #define put_user_u8(x, gaddr) put_user((x), (gaddr), uint8_t) 302 #define put_user_s8(x, gaddr) put_user((x), (gaddr), int8_t) 303 304 #define get_user_ual(x, gaddr) get_user((x), (gaddr), abi_ulong) 305 #define get_user_sal(x, gaddr) get_user((x), (gaddr), abi_long) 306 #define get_user_u64(x, gaddr) get_user((x), (gaddr), uint64_t) 307 #define get_user_s64(x, gaddr) get_user((x), (gaddr), int64_t) 308 #define get_user_u32(x, gaddr) get_user((x), (gaddr), uint32_t) 309 #define get_user_s32(x, gaddr) get_user((x), (gaddr), int32_t) 310 #define get_user_u16(x, gaddr) get_user((x), (gaddr), uint16_t) 311 #define get_user_s16(x, gaddr) get_user((x), (gaddr), int16_t) 312 #define get_user_u8(x, gaddr) get_user((x), (gaddr), uint8_t) 313 #define get_user_s8(x, gaddr) get_user((x), (gaddr), int8_t) 314 315 /* copy_from_user() and copy_to_user() are usually used to copy data 316 * buffers between the target and host. These internally perform 317 * locking/unlocking of the memory. 318 */ 319 int copy_from_user(void *hptr, abi_ulong gaddr, ssize_t len); 320 int copy_to_user(abi_ulong gaddr, void *hptr, ssize_t len); 321 322 /* Functions for accessing guest memory. The tget and tput functions 323 read/write single values, byteswapping as necessary. The lock_user function 324 gets a pointer to a contiguous area of guest memory, but does not perform 325 any byteswapping. lock_user may return either a pointer to the guest 326 memory, or a temporary buffer. */ 327 328 /* Lock an area of guest memory into the host. If copy is true then the 329 host area will have the same contents as the guest. */ 330 void *lock_user(int type, abi_ulong guest_addr, ssize_t len, bool copy); 331 332 /* Unlock an area of guest memory. The first LEN bytes must be 333 flushed back to guest memory. host_ptr = NULL is explicitly 334 allowed and does nothing. */ 335 #ifndef DEBUG_REMAP 336 static inline void unlock_user(void *host_ptr, abi_ulong guest_addr, 337 ssize_t len) 338 { 339 /* no-op */ 340 } 341 #else 342 void unlock_user(void *host_ptr, abi_ulong guest_addr, ssize_t len); 343 #endif 344 345 /* Return the length of a string in target memory or -TARGET_EFAULT if 346 access error. */ 347 ssize_t target_strlen(abi_ulong gaddr); 348 349 /* Like lock_user but for null terminated strings. */ 350 void *lock_user_string(abi_ulong guest_addr); 351 352 /* Helper macros for locking/unlocking a target struct. */ 353 #define lock_user_struct(type, host_ptr, guest_addr, copy) \ 354 (host_ptr = lock_user(type, guest_addr, sizeof(*host_ptr), copy)) 355 #define unlock_user_struct(host_ptr, guest_addr, copy) \ 356 unlock_user(host_ptr, guest_addr, (copy) ? sizeof(*host_ptr) : 0) 357 358 #endif /* QEMU_H */ 359