1 #ifndef QEMU_H 2 #define QEMU_H 3 4 #include "cpu.h" 5 #include "exec/cpu_ldst.h" 6 7 #undef DEBUG_REMAP 8 9 #include "exec/user/abitypes.h" 10 11 #include "syscall_defs.h" 12 #include "target_syscall.h" 13 14 /* 15 * This is the size of the host kernel's sigset_t, needed where we make 16 * direct system calls that take a sigset_t pointer and a size. 17 */ 18 #define SIGSET_T_SIZE (_NSIG / 8) 19 20 /* 21 * This struct is used to hold certain information about the image. 22 * Basically, it replicates in user space what would be certain 23 * task_struct fields in the kernel 24 */ 25 struct image_info { 26 abi_ulong load_bias; 27 abi_ulong load_addr; 28 abi_ulong start_code; 29 abi_ulong end_code; 30 abi_ulong start_data; 31 abi_ulong end_data; 32 abi_ulong start_brk; 33 abi_ulong brk; 34 abi_ulong reserve_brk; 35 abi_ulong start_mmap; 36 abi_ulong start_stack; 37 abi_ulong stack_limit; 38 abi_ulong entry; 39 abi_ulong code_offset; 40 abi_ulong data_offset; 41 abi_ulong saved_auxv; 42 abi_ulong auxv_len; 43 abi_ulong arg_start; 44 abi_ulong arg_end; 45 abi_ulong arg_strings; 46 abi_ulong env_strings; 47 abi_ulong file_string; 48 uint32_t elf_flags; 49 int personality; 50 abi_ulong alignment; 51 52 /* The fields below are used in FDPIC mode. */ 53 abi_ulong loadmap_addr; 54 uint16_t nsegs; 55 void *loadsegs; 56 abi_ulong pt_dynamic_addr; 57 abi_ulong interpreter_loadmap_addr; 58 abi_ulong interpreter_pt_dynamic_addr; 59 struct image_info *other_info; 60 61 /* For target-specific processing of NT_GNU_PROPERTY_TYPE_0. */ 62 uint32_t note_flags; 63 64 #ifdef TARGET_MIPS 65 int fp_abi; 66 int interp_fp_abi; 67 #endif 68 }; 69 70 #ifdef TARGET_I386 71 /* Information about the current linux thread */ 72 struct vm86_saved_state { 73 uint32_t eax; /* return code */ 74 uint32_t ebx; 75 uint32_t ecx; 76 uint32_t edx; 77 uint32_t esi; 78 uint32_t edi; 79 uint32_t ebp; 80 uint32_t esp; 81 uint32_t eflags; 82 uint32_t eip; 83 uint16_t cs, ss, ds, es, fs, gs; 84 }; 85 #endif 86 87 #if defined(TARGET_ARM) && defined(TARGET_ABI32) 88 /* FPU emulator */ 89 #include "nwfpe/fpa11.h" 90 #endif 91 92 struct emulated_sigtable { 93 int pending; /* true if signal is pending */ 94 target_siginfo_t info; 95 }; 96 97 typedef struct TaskState { 98 pid_t ts_tid; /* tid (or pid) of this task */ 99 #ifdef TARGET_ARM 100 # ifdef TARGET_ABI32 101 /* FPA state */ 102 FPA11 fpa; 103 # endif 104 #endif 105 #if defined(TARGET_ARM) || defined(TARGET_RISCV) 106 int swi_errno; 107 #endif 108 #if defined(TARGET_I386) && !defined(TARGET_X86_64) 109 abi_ulong target_v86; 110 struct vm86_saved_state vm86_saved_regs; 111 struct target_vm86plus_struct vm86plus; 112 uint32_t v86flags; 113 uint32_t v86mask; 114 #endif 115 abi_ulong child_tidptr; 116 #ifdef TARGET_M68K 117 abi_ulong tp_value; 118 #endif 119 #if defined(TARGET_ARM) || defined(TARGET_M68K) || defined(TARGET_RISCV) 120 /* Extra fields for semihosted binaries. */ 121 abi_ulong heap_base; 122 abi_ulong heap_limit; 123 #endif 124 abi_ulong stack_base; 125 int used; /* non zero if used */ 126 struct image_info *info; 127 struct linux_binprm *bprm; 128 129 struct emulated_sigtable sync_signal; 130 struct emulated_sigtable sigtab[TARGET_NSIG]; 131 /* 132 * This thread's signal mask, as requested by the guest program. 133 * The actual signal mask of this thread may differ: 134 * + we don't let SIGSEGV and SIGBUS be blocked while running guest code 135 * + sometimes we block all signals to avoid races 136 */ 137 sigset_t signal_mask; 138 /* 139 * The signal mask imposed by a guest sigsuspend syscall, if we are 140 * currently in the middle of such a syscall 141 */ 142 sigset_t sigsuspend_mask; 143 /* Nonzero if we're leaving a sigsuspend and sigsuspend_mask is valid. */ 144 int in_sigsuspend; 145 146 /* 147 * Nonzero if process_pending_signals() needs to do something (either 148 * handle a pending signal or unblock signals). 149 * This flag is written from a signal handler so should be accessed via 150 * the qatomic_read() and qatomic_set() functions. (It is not accessed 151 * from multiple threads.) 152 */ 153 int signal_pending; 154 155 /* This thread's sigaltstack, if it has one */ 156 struct target_sigaltstack sigaltstack_used; 157 158 /* Start time of task after system boot in clock ticks */ 159 uint64_t start_boottime; 160 } TaskState; 161 162 abi_long do_brk(abi_ulong new_brk); 163 164 /* user access */ 165 166 #define VERIFY_READ PAGE_READ 167 #define VERIFY_WRITE (PAGE_READ | PAGE_WRITE) 168 169 static inline bool access_ok_untagged(int type, abi_ulong addr, abi_ulong size) 170 { 171 if (size == 0 172 ? !guest_addr_valid_untagged(addr) 173 : !guest_range_valid_untagged(addr, size)) { 174 return false; 175 } 176 return page_check_range((target_ulong)addr, size, type) == 0; 177 } 178 179 static inline bool access_ok(CPUState *cpu, int type, 180 abi_ulong addr, abi_ulong size) 181 { 182 return access_ok_untagged(type, cpu_untagged_addr(cpu, addr), size); 183 } 184 185 /* NOTE __get_user and __put_user use host pointers and don't check access. 186 These are usually used to access struct data members once the struct has 187 been locked - usually with lock_user_struct. */ 188 189 /* 190 * Tricky points: 191 * - Use __builtin_choose_expr to avoid type promotion from ?:, 192 * - Invalid sizes result in a compile time error stemming from 193 * the fact that abort has no parameters. 194 * - It's easier to use the endian-specific unaligned load/store 195 * functions than host-endian unaligned load/store plus tswapN. 196 * - The pragmas are necessary only to silence a clang false-positive 197 * warning: see https://bugs.llvm.org/show_bug.cgi?id=39113 . 198 * - gcc has bugs in its _Pragma() support in some versions, eg 199 * https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83256 -- so we only 200 * include the warning-suppression pragmas for clang 201 */ 202 #if defined(__clang__) && __has_warning("-Waddress-of-packed-member") 203 #define PRAGMA_DISABLE_PACKED_WARNING \ 204 _Pragma("GCC diagnostic push"); \ 205 _Pragma("GCC diagnostic ignored \"-Waddress-of-packed-member\"") 206 207 #define PRAGMA_REENABLE_PACKED_WARNING \ 208 _Pragma("GCC diagnostic pop") 209 210 #else 211 #define PRAGMA_DISABLE_PACKED_WARNING 212 #define PRAGMA_REENABLE_PACKED_WARNING 213 #endif 214 215 #define __put_user_e(x, hptr, e) \ 216 do { \ 217 PRAGMA_DISABLE_PACKED_WARNING; \ 218 (__builtin_choose_expr(sizeof(*(hptr)) == 1, stb_p, \ 219 __builtin_choose_expr(sizeof(*(hptr)) == 2, stw_##e##_p, \ 220 __builtin_choose_expr(sizeof(*(hptr)) == 4, stl_##e##_p, \ 221 __builtin_choose_expr(sizeof(*(hptr)) == 8, stq_##e##_p, abort)))) \ 222 ((hptr), (x)), (void)0); \ 223 PRAGMA_REENABLE_PACKED_WARNING; \ 224 } while (0) 225 226 #define __get_user_e(x, hptr, e) \ 227 do { \ 228 PRAGMA_DISABLE_PACKED_WARNING; \ 229 ((x) = (typeof(*hptr))( \ 230 __builtin_choose_expr(sizeof(*(hptr)) == 1, ldub_p, \ 231 __builtin_choose_expr(sizeof(*(hptr)) == 2, lduw_##e##_p, \ 232 __builtin_choose_expr(sizeof(*(hptr)) == 4, ldl_##e##_p, \ 233 __builtin_choose_expr(sizeof(*(hptr)) == 8, ldq_##e##_p, abort)))) \ 234 (hptr)), (void)0); \ 235 PRAGMA_REENABLE_PACKED_WARNING; \ 236 } while (0) 237 238 239 #ifdef TARGET_WORDS_BIGENDIAN 240 # define __put_user(x, hptr) __put_user_e(x, hptr, be) 241 # define __get_user(x, hptr) __get_user_e(x, hptr, be) 242 #else 243 # define __put_user(x, hptr) __put_user_e(x, hptr, le) 244 # define __get_user(x, hptr) __get_user_e(x, hptr, le) 245 #endif 246 247 /* put_user()/get_user() take a guest address and check access */ 248 /* These are usually used to access an atomic data type, such as an int, 249 * that has been passed by address. These internally perform locking 250 * and unlocking on the data type. 251 */ 252 #define put_user(x, gaddr, target_type) \ 253 ({ \ 254 abi_ulong __gaddr = (gaddr); \ 255 target_type *__hptr; \ 256 abi_long __ret = 0; \ 257 if ((__hptr = lock_user(VERIFY_WRITE, __gaddr, sizeof(target_type), 0))) { \ 258 __put_user((x), __hptr); \ 259 unlock_user(__hptr, __gaddr, sizeof(target_type)); \ 260 } else \ 261 __ret = -TARGET_EFAULT; \ 262 __ret; \ 263 }) 264 265 #define get_user(x, gaddr, target_type) \ 266 ({ \ 267 abi_ulong __gaddr = (gaddr); \ 268 target_type *__hptr; \ 269 abi_long __ret = 0; \ 270 if ((__hptr = lock_user(VERIFY_READ, __gaddr, sizeof(target_type), 1))) { \ 271 __get_user((x), __hptr); \ 272 unlock_user(__hptr, __gaddr, 0); \ 273 } else { \ 274 /* avoid warning */ \ 275 (x) = 0; \ 276 __ret = -TARGET_EFAULT; \ 277 } \ 278 __ret; \ 279 }) 280 281 #define put_user_ual(x, gaddr) put_user((x), (gaddr), abi_ulong) 282 #define put_user_sal(x, gaddr) put_user((x), (gaddr), abi_long) 283 #define put_user_u64(x, gaddr) put_user((x), (gaddr), uint64_t) 284 #define put_user_s64(x, gaddr) put_user((x), (gaddr), int64_t) 285 #define put_user_u32(x, gaddr) put_user((x), (gaddr), uint32_t) 286 #define put_user_s32(x, gaddr) put_user((x), (gaddr), int32_t) 287 #define put_user_u16(x, gaddr) put_user((x), (gaddr), uint16_t) 288 #define put_user_s16(x, gaddr) put_user((x), (gaddr), int16_t) 289 #define put_user_u8(x, gaddr) put_user((x), (gaddr), uint8_t) 290 #define put_user_s8(x, gaddr) put_user((x), (gaddr), int8_t) 291 292 #define get_user_ual(x, gaddr) get_user((x), (gaddr), abi_ulong) 293 #define get_user_sal(x, gaddr) get_user((x), (gaddr), abi_long) 294 #define get_user_u64(x, gaddr) get_user((x), (gaddr), uint64_t) 295 #define get_user_s64(x, gaddr) get_user((x), (gaddr), int64_t) 296 #define get_user_u32(x, gaddr) get_user((x), (gaddr), uint32_t) 297 #define get_user_s32(x, gaddr) get_user((x), (gaddr), int32_t) 298 #define get_user_u16(x, gaddr) get_user((x), (gaddr), uint16_t) 299 #define get_user_s16(x, gaddr) get_user((x), (gaddr), int16_t) 300 #define get_user_u8(x, gaddr) get_user((x), (gaddr), uint8_t) 301 #define get_user_s8(x, gaddr) get_user((x), (gaddr), int8_t) 302 303 /* copy_from_user() and copy_to_user() are usually used to copy data 304 * buffers between the target and host. These internally perform 305 * locking/unlocking of the memory. 306 */ 307 int copy_from_user(void *hptr, abi_ulong gaddr, ssize_t len); 308 int copy_to_user(abi_ulong gaddr, void *hptr, ssize_t len); 309 310 /* Functions for accessing guest memory. The tget and tput functions 311 read/write single values, byteswapping as necessary. The lock_user function 312 gets a pointer to a contiguous area of guest memory, but does not perform 313 any byteswapping. lock_user may return either a pointer to the guest 314 memory, or a temporary buffer. */ 315 316 /* Lock an area of guest memory into the host. If copy is true then the 317 host area will have the same contents as the guest. */ 318 void *lock_user(int type, abi_ulong guest_addr, ssize_t len, bool copy); 319 320 /* Unlock an area of guest memory. The first LEN bytes must be 321 flushed back to guest memory. host_ptr = NULL is explicitly 322 allowed and does nothing. */ 323 #ifndef DEBUG_REMAP 324 static inline void unlock_user(void *host_ptr, abi_ulong guest_addr, 325 ssize_t len) 326 { 327 /* no-op */ 328 } 329 #else 330 void unlock_user(void *host_ptr, abi_ulong guest_addr, ssize_t len); 331 #endif 332 333 /* Return the length of a string in target memory or -TARGET_EFAULT if 334 access error. */ 335 ssize_t target_strlen(abi_ulong gaddr); 336 337 /* Like lock_user but for null terminated strings. */ 338 void *lock_user_string(abi_ulong guest_addr); 339 340 /* Helper macros for locking/unlocking a target struct. */ 341 #define lock_user_struct(type, host_ptr, guest_addr, copy) \ 342 (host_ptr = lock_user(type, guest_addr, sizeof(*host_ptr), copy)) 343 #define unlock_user_struct(host_ptr, guest_addr, copy) \ 344 unlock_user(host_ptr, guest_addr, (copy) ? sizeof(*host_ptr) : 0) 345 346 #endif /* QEMU_H */ 347