1 #ifndef QEMU_H 2 #define QEMU_H 3 4 #include "cpu.h" 5 #include "exec/cpu_ldst.h" 6 7 #undef DEBUG_REMAP 8 9 #include "exec/user/abitypes.h" 10 11 #include "syscall_defs.h" 12 #include "target_syscall.h" 13 14 /* 15 * This is the size of the host kernel's sigset_t, needed where we make 16 * direct system calls that take a sigset_t pointer and a size. 17 */ 18 #define SIGSET_T_SIZE (_NSIG / 8) 19 20 /* 21 * This struct is used to hold certain information about the image. 22 * Basically, it replicates in user space what would be certain 23 * task_struct fields in the kernel 24 */ 25 struct image_info { 26 abi_ulong load_bias; 27 abi_ulong load_addr; 28 abi_ulong start_code; 29 abi_ulong end_code; 30 abi_ulong start_data; 31 abi_ulong end_data; 32 abi_ulong start_brk; 33 abi_ulong brk; 34 abi_ulong reserve_brk; 35 abi_ulong start_mmap; 36 abi_ulong start_stack; 37 abi_ulong stack_limit; 38 abi_ulong entry; 39 abi_ulong code_offset; 40 abi_ulong data_offset; 41 abi_ulong saved_auxv; 42 abi_ulong auxv_len; 43 abi_ulong argc; 44 abi_ulong argv; 45 abi_ulong envc; 46 abi_ulong envp; 47 abi_ulong file_string; 48 uint32_t elf_flags; 49 int personality; 50 abi_ulong alignment; 51 bool exec_stack; 52 53 /* Generic semihosting knows about these pointers. */ 54 abi_ulong arg_strings; /* strings for argv */ 55 abi_ulong env_strings; /* strings for envp; ends arg_strings */ 56 57 /* The fields below are used in FDPIC mode. */ 58 abi_ulong loadmap_addr; 59 uint16_t nsegs; 60 void *loadsegs; 61 abi_ulong pt_dynamic_addr; 62 abi_ulong interpreter_loadmap_addr; 63 abi_ulong interpreter_pt_dynamic_addr; 64 struct image_info *other_info; 65 66 /* For target-specific processing of NT_GNU_PROPERTY_TYPE_0. */ 67 uint32_t note_flags; 68 69 #ifdef TARGET_MIPS 70 int fp_abi; 71 int interp_fp_abi; 72 #endif 73 }; 74 75 #ifdef TARGET_I386 76 /* Information about the current linux thread */ 77 struct vm86_saved_state { 78 uint32_t eax; /* return code */ 79 uint32_t ebx; 80 uint32_t ecx; 81 uint32_t edx; 82 uint32_t esi; 83 uint32_t edi; 84 uint32_t ebp; 85 uint32_t esp; 86 uint32_t eflags; 87 uint32_t eip; 88 uint16_t cs, ss, ds, es, fs, gs; 89 }; 90 #endif 91 92 #if defined(TARGET_ARM) && defined(TARGET_ABI32) 93 /* FPU emulator */ 94 #include "nwfpe/fpa11.h" 95 #endif 96 97 struct emulated_sigtable { 98 int pending; /* true if signal is pending */ 99 target_siginfo_t info; 100 }; 101 102 typedef struct TaskState { 103 pid_t ts_tid; /* tid (or pid) of this task */ 104 #ifdef TARGET_ARM 105 # ifdef TARGET_ABI32 106 /* FPA state */ 107 FPA11 fpa; 108 # endif 109 #endif 110 #if defined(TARGET_ARM) || defined(TARGET_RISCV) 111 int swi_errno; 112 #endif 113 #if defined(TARGET_I386) && !defined(TARGET_X86_64) 114 abi_ulong target_v86; 115 struct vm86_saved_state vm86_saved_regs; 116 struct target_vm86plus_struct vm86plus; 117 uint32_t v86flags; 118 uint32_t v86mask; 119 #endif 120 abi_ulong child_tidptr; 121 #ifdef TARGET_M68K 122 abi_ulong tp_value; 123 #endif 124 #if defined(TARGET_ARM) || defined(TARGET_M68K) || defined(TARGET_RISCV) 125 /* Extra fields for semihosted binaries. */ 126 abi_ulong heap_base; 127 abi_ulong heap_limit; 128 #endif 129 abi_ulong stack_base; 130 int used; /* non zero if used */ 131 struct image_info *info; 132 struct linux_binprm *bprm; 133 134 struct emulated_sigtable sync_signal; 135 struct emulated_sigtable sigtab[TARGET_NSIG]; 136 /* 137 * This thread's signal mask, as requested by the guest program. 138 * The actual signal mask of this thread may differ: 139 * + we don't let SIGSEGV and SIGBUS be blocked while running guest code 140 * + sometimes we block all signals to avoid races 141 */ 142 sigset_t signal_mask; 143 /* 144 * The signal mask imposed by a guest sigsuspend syscall, if we are 145 * currently in the middle of such a syscall 146 */ 147 sigset_t sigsuspend_mask; 148 /* Nonzero if we're leaving a sigsuspend and sigsuspend_mask is valid. */ 149 int in_sigsuspend; 150 151 /* 152 * Nonzero if process_pending_signals() needs to do something (either 153 * handle a pending signal or unblock signals). 154 * This flag is written from a signal handler so should be accessed via 155 * the qatomic_read() and qatomic_set() functions. (It is not accessed 156 * from multiple threads.) 157 */ 158 int signal_pending; 159 160 /* This thread's sigaltstack, if it has one */ 161 struct target_sigaltstack sigaltstack_used; 162 163 /* Start time of task after system boot in clock ticks */ 164 uint64_t start_boottime; 165 } TaskState; 166 167 abi_long do_brk(abi_ulong new_brk); 168 169 /* user access */ 170 171 #define VERIFY_NONE 0 172 #define VERIFY_READ PAGE_READ 173 #define VERIFY_WRITE (PAGE_READ | PAGE_WRITE) 174 175 static inline bool access_ok_untagged(int type, abi_ulong addr, abi_ulong size) 176 { 177 if (size == 0 178 ? !guest_addr_valid_untagged(addr) 179 : !guest_range_valid_untagged(addr, size)) { 180 return false; 181 } 182 return page_check_range((target_ulong)addr, size, type) == 0; 183 } 184 185 static inline bool access_ok(CPUState *cpu, int type, 186 abi_ulong addr, abi_ulong size) 187 { 188 return access_ok_untagged(type, cpu_untagged_addr(cpu, addr), size); 189 } 190 191 /* NOTE __get_user and __put_user use host pointers and don't check access. 192 These are usually used to access struct data members once the struct has 193 been locked - usually with lock_user_struct. */ 194 195 /* 196 * Tricky points: 197 * - Use __builtin_choose_expr to avoid type promotion from ?:, 198 * - Invalid sizes result in a compile time error stemming from 199 * the fact that abort has no parameters. 200 * - It's easier to use the endian-specific unaligned load/store 201 * functions than host-endian unaligned load/store plus tswapN. 202 * - The pragmas are necessary only to silence a clang false-positive 203 * warning: see https://bugs.llvm.org/show_bug.cgi?id=39113 . 204 * - gcc has bugs in its _Pragma() support in some versions, eg 205 * https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83256 -- so we only 206 * include the warning-suppression pragmas for clang 207 */ 208 #if defined(__clang__) && __has_warning("-Waddress-of-packed-member") 209 #define PRAGMA_DISABLE_PACKED_WARNING \ 210 _Pragma("GCC diagnostic push"); \ 211 _Pragma("GCC diagnostic ignored \"-Waddress-of-packed-member\"") 212 213 #define PRAGMA_REENABLE_PACKED_WARNING \ 214 _Pragma("GCC diagnostic pop") 215 216 #else 217 #define PRAGMA_DISABLE_PACKED_WARNING 218 #define PRAGMA_REENABLE_PACKED_WARNING 219 #endif 220 221 #define __put_user_e(x, hptr, e) \ 222 do { \ 223 PRAGMA_DISABLE_PACKED_WARNING; \ 224 (__builtin_choose_expr(sizeof(*(hptr)) == 1, stb_p, \ 225 __builtin_choose_expr(sizeof(*(hptr)) == 2, stw_##e##_p, \ 226 __builtin_choose_expr(sizeof(*(hptr)) == 4, stl_##e##_p, \ 227 __builtin_choose_expr(sizeof(*(hptr)) == 8, stq_##e##_p, abort)))) \ 228 ((hptr), (x)), (void)0); \ 229 PRAGMA_REENABLE_PACKED_WARNING; \ 230 } while (0) 231 232 #define __get_user_e(x, hptr, e) \ 233 do { \ 234 PRAGMA_DISABLE_PACKED_WARNING; \ 235 ((x) = (typeof(*hptr))( \ 236 __builtin_choose_expr(sizeof(*(hptr)) == 1, ldub_p, \ 237 __builtin_choose_expr(sizeof(*(hptr)) == 2, lduw_##e##_p, \ 238 __builtin_choose_expr(sizeof(*(hptr)) == 4, ldl_##e##_p, \ 239 __builtin_choose_expr(sizeof(*(hptr)) == 8, ldq_##e##_p, abort)))) \ 240 (hptr)), (void)0); \ 241 PRAGMA_REENABLE_PACKED_WARNING; \ 242 } while (0) 243 244 245 #if TARGET_BIG_ENDIAN 246 # define __put_user(x, hptr) __put_user_e(x, hptr, be) 247 # define __get_user(x, hptr) __get_user_e(x, hptr, be) 248 #else 249 # define __put_user(x, hptr) __put_user_e(x, hptr, le) 250 # define __get_user(x, hptr) __get_user_e(x, hptr, le) 251 #endif 252 253 /* put_user()/get_user() take a guest address and check access */ 254 /* These are usually used to access an atomic data type, such as an int, 255 * that has been passed by address. These internally perform locking 256 * and unlocking on the data type. 257 */ 258 #define put_user(x, gaddr, target_type) \ 259 ({ \ 260 abi_ulong __gaddr = (gaddr); \ 261 target_type *__hptr; \ 262 abi_long __ret = 0; \ 263 if ((__hptr = lock_user(VERIFY_WRITE, __gaddr, sizeof(target_type), 0))) { \ 264 __put_user((x), __hptr); \ 265 unlock_user(__hptr, __gaddr, sizeof(target_type)); \ 266 } else \ 267 __ret = -TARGET_EFAULT; \ 268 __ret; \ 269 }) 270 271 #define get_user(x, gaddr, target_type) \ 272 ({ \ 273 abi_ulong __gaddr = (gaddr); \ 274 target_type *__hptr; \ 275 abi_long __ret = 0; \ 276 if ((__hptr = lock_user(VERIFY_READ, __gaddr, sizeof(target_type), 1))) { \ 277 __get_user((x), __hptr); \ 278 unlock_user(__hptr, __gaddr, 0); \ 279 } else { \ 280 /* avoid warning */ \ 281 (x) = 0; \ 282 __ret = -TARGET_EFAULT; \ 283 } \ 284 __ret; \ 285 }) 286 287 #define put_user_ual(x, gaddr) put_user((x), (gaddr), abi_ulong) 288 #define put_user_sal(x, gaddr) put_user((x), (gaddr), abi_long) 289 #define put_user_u64(x, gaddr) put_user((x), (gaddr), uint64_t) 290 #define put_user_s64(x, gaddr) put_user((x), (gaddr), int64_t) 291 #define put_user_u32(x, gaddr) put_user((x), (gaddr), uint32_t) 292 #define put_user_s32(x, gaddr) put_user((x), (gaddr), int32_t) 293 #define put_user_u16(x, gaddr) put_user((x), (gaddr), uint16_t) 294 #define put_user_s16(x, gaddr) put_user((x), (gaddr), int16_t) 295 #define put_user_u8(x, gaddr) put_user((x), (gaddr), uint8_t) 296 #define put_user_s8(x, gaddr) put_user((x), (gaddr), int8_t) 297 298 #define get_user_ual(x, gaddr) get_user((x), (gaddr), abi_ulong) 299 #define get_user_sal(x, gaddr) get_user((x), (gaddr), abi_long) 300 #define get_user_u64(x, gaddr) get_user((x), (gaddr), uint64_t) 301 #define get_user_s64(x, gaddr) get_user((x), (gaddr), int64_t) 302 #define get_user_u32(x, gaddr) get_user((x), (gaddr), uint32_t) 303 #define get_user_s32(x, gaddr) get_user((x), (gaddr), int32_t) 304 #define get_user_u16(x, gaddr) get_user((x), (gaddr), uint16_t) 305 #define get_user_s16(x, gaddr) get_user((x), (gaddr), int16_t) 306 #define get_user_u8(x, gaddr) get_user((x), (gaddr), uint8_t) 307 #define get_user_s8(x, gaddr) get_user((x), (gaddr), int8_t) 308 309 /* copy_from_user() and copy_to_user() are usually used to copy data 310 * buffers between the target and host. These internally perform 311 * locking/unlocking of the memory. 312 */ 313 int copy_from_user(void *hptr, abi_ulong gaddr, ssize_t len); 314 int copy_to_user(abi_ulong gaddr, void *hptr, ssize_t len); 315 316 /* Functions for accessing guest memory. The tget and tput functions 317 read/write single values, byteswapping as necessary. The lock_user function 318 gets a pointer to a contiguous area of guest memory, but does not perform 319 any byteswapping. lock_user may return either a pointer to the guest 320 memory, or a temporary buffer. */ 321 322 /* Lock an area of guest memory into the host. If copy is true then the 323 host area will have the same contents as the guest. */ 324 void *lock_user(int type, abi_ulong guest_addr, ssize_t len, bool copy); 325 326 /* Unlock an area of guest memory. The first LEN bytes must be 327 flushed back to guest memory. host_ptr = NULL is explicitly 328 allowed and does nothing. */ 329 #ifndef DEBUG_REMAP 330 static inline void unlock_user(void *host_ptr, abi_ulong guest_addr, 331 ssize_t len) 332 { 333 /* no-op */ 334 } 335 #else 336 void unlock_user(void *host_ptr, abi_ulong guest_addr, ssize_t len); 337 #endif 338 339 /* Return the length of a string in target memory or -TARGET_EFAULT if 340 access error. */ 341 ssize_t target_strlen(abi_ulong gaddr); 342 343 /* Like lock_user but for null terminated strings. */ 344 void *lock_user_string(abi_ulong guest_addr); 345 346 /* Helper macros for locking/unlocking a target struct. */ 347 #define lock_user_struct(type, host_ptr, guest_addr, copy) \ 348 (host_ptr = lock_user(type, guest_addr, sizeof(*host_ptr), copy)) 349 #define unlock_user_struct(host_ptr, guest_addr, copy) \ 350 unlock_user(host_ptr, guest_addr, (copy) ? sizeof(*host_ptr) : 0) 351 352 #endif /* QEMU_H */ 353