xref: /openbmc/qemu/linux-user/arm/nwfpe/fpa11.c (revision f101c9fe)
1 /*
2     NetWinder Floating Point Emulator
3     (c) Rebel.COM, 1998,1999
4 
5     Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
6 
7     This program is free software; you can redistribute it and/or modify
8     it under the terms of the GNU General Public License as published by
9     the Free Software Foundation; either version 2 of the License, or
10     (at your option) any later version.
11 
12     This program is distributed in the hope that it will be useful,
13     but WITHOUT ANY WARRANTY; without even the implied warranty of
14     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15     GNU General Public License for more details.
16 
17     You should have received a copy of the GNU General Public License
18     along with this program; if not, see <http://www.gnu.org/licenses/>.
19 */
20 
21 #include "qemu/osdep.h"
22 #include "fpa11.h"
23 
24 #include "fpopcode.h"
25 
26 //#include "fpmodule.h"
27 //#include "fpmodule.inl"
28 
29 //#include <asm/system.h>
30 
31 
32 FPA11* qemufpa = NULL;
33 CPUARMState* user_registers;
34 
35 /* Reset the FPA11 chip.  Called to initialize and reset the emulator. */
36 void resetFPA11(void)
37 {
38   int i;
39   FPA11 *fpa11 = GET_FPA11();
40 
41   /* initialize the register type array */
42   for (i=0;i<=7;i++)
43   {
44     fpa11->fType[i] = typeNone;
45   }
46 
47   /* FPSR: set system id to FP_EMULATOR, set AC, clear all other bits */
48   fpa11->fpsr = FP_EMULATOR | BIT_AC;
49 
50   /* FPCR: set SB, AB and DA bits, clear all others */
51 #ifdef MAINTAIN_FPCR
52   fpa11->fpcr = MASK_RESET;
53 #endif
54 }
55 
56 void SetRoundingMode(const unsigned int opcode)
57 {
58     int rounding_mode;
59    FPA11 *fpa11 = GET_FPA11();
60 
61 #ifdef MAINTAIN_FPCR
62    fpa11->fpcr &= ~MASK_ROUNDING_MODE;
63 #endif
64    switch (opcode & MASK_ROUNDING_MODE)
65    {
66       default:
67       case ROUND_TO_NEAREST:
68          rounding_mode = float_round_nearest_even;
69 #ifdef MAINTAIN_FPCR
70          fpa11->fpcr |= ROUND_TO_NEAREST;
71 #endif
72       break;
73 
74       case ROUND_TO_PLUS_INFINITY:
75          rounding_mode = float_round_up;
76 #ifdef MAINTAIN_FPCR
77          fpa11->fpcr |= ROUND_TO_PLUS_INFINITY;
78 #endif
79       break;
80 
81       case ROUND_TO_MINUS_INFINITY:
82          rounding_mode = float_round_down;
83 #ifdef MAINTAIN_FPCR
84          fpa11->fpcr |= ROUND_TO_MINUS_INFINITY;
85 #endif
86       break;
87 
88       case ROUND_TO_ZERO:
89          rounding_mode = float_round_to_zero;
90 #ifdef MAINTAIN_FPCR
91          fpa11->fpcr |= ROUND_TO_ZERO;
92 #endif
93       break;
94   }
95    set_float_rounding_mode(rounding_mode, &fpa11->fp_status);
96 }
97 
98 void SetRoundingPrecision(const unsigned int opcode)
99 {
100     FloatX80RoundPrec rounding_precision;
101     FPA11 *fpa11 = GET_FPA11();
102 #ifdef MAINTAIN_FPCR
103     fpa11->fpcr &= ~MASK_ROUNDING_PRECISION;
104 #endif
105     switch (opcode & MASK_ROUNDING_PRECISION) {
106     case ROUND_SINGLE:
107         rounding_precision = floatx80_precision_s;
108 #ifdef MAINTAIN_FPCR
109         fpa11->fpcr |= ROUND_SINGLE;
110 #endif
111         break;
112 
113     case ROUND_DOUBLE:
114         rounding_precision = floatx80_precision_d;
115 #ifdef MAINTAIN_FPCR
116         fpa11->fpcr |= ROUND_DOUBLE;
117 #endif
118         break;
119 
120     case ROUND_EXTENDED:
121         rounding_precision = floatx80_precision_x;
122 #ifdef MAINTAIN_FPCR
123         fpa11->fpcr |= ROUND_EXTENDED;
124 #endif
125         break;
126 
127     default:
128         rounding_precision = floatx80_precision_x;
129         break;
130     }
131     set_floatx80_rounding_precision(rounding_precision, &fpa11->fp_status);
132 }
133 
134 /* Emulate the instruction in the opcode. */
135 /* ??? This is not thread safe.  */
136 unsigned int EmulateAll(unsigned int opcode, FPA11* qfpa, CPUARMState* qregs)
137 {
138   unsigned int nRc = 0;
139 //  unsigned long flags;
140   FPA11 *fpa11;
141   unsigned int cp;
142 //  save_flags(flags); sti();
143 
144   /* Check that this is really an FPA11 instruction: the coprocessor
145    * field in bits [11:8] must be 1 or 2.
146    */
147   cp = (opcode >> 8) & 0xf;
148   if (cp != 1 && cp != 2) {
149     return 0;
150   }
151 
152   qemufpa=qfpa;
153   user_registers=qregs;
154 
155 #if 0
156   fprintf(stderr,"emulating FP insn 0x%08x, PC=0x%08x\n",
157           opcode, qregs[ARM_REG_PC]);
158 #endif
159   fpa11 = GET_FPA11();
160 
161   if (fpa11->initflag == 0)		/* good place for __builtin_expect */
162   {
163     resetFPA11();
164     SetRoundingMode(ROUND_TO_NEAREST);
165     SetRoundingPrecision(ROUND_EXTENDED);
166     fpa11->initflag = 1;
167   }
168 
169   set_float_exception_flags(0, &fpa11->fp_status);
170 
171   if (TEST_OPCODE(opcode,MASK_CPRT))
172   {
173     //fprintf(stderr,"emulating CPRT\n");
174     /* Emulate conversion opcodes. */
175     /* Emulate register transfer opcodes. */
176     /* Emulate comparison opcodes. */
177     nRc = EmulateCPRT(opcode);
178   }
179   else if (TEST_OPCODE(opcode,MASK_CPDO))
180   {
181     //fprintf(stderr,"emulating CPDO\n");
182     /* Emulate monadic arithmetic opcodes. */
183     /* Emulate dyadic arithmetic opcodes. */
184     nRc = EmulateCPDO(opcode);
185   }
186   else if (TEST_OPCODE(opcode,MASK_CPDT))
187   {
188     //fprintf(stderr,"emulating CPDT\n");
189     /* Emulate load/store opcodes. */
190     /* Emulate load/store multiple opcodes. */
191     nRc = EmulateCPDT(opcode);
192   }
193   else
194   {
195     /* Invalid instruction detected.  Return FALSE. */
196     nRc = 0;
197   }
198 
199 //  restore_flags(flags);
200   if(nRc == 1 && get_float_exception_flags(&fpa11->fp_status))
201   {
202     //printf("fef 0x%x\n",float_exception_flags);
203     nRc = -get_float_exception_flags(&fpa11->fp_status);
204   }
205 
206   //printf("returning %d\n",nRc);
207   return(nRc);
208 }
209 
210 #if 0
211 unsigned int EmulateAll1(unsigned int opcode)
212 {
213   switch ((opcode >> 24) & 0xf)
214   {
215      case 0xc:
216      case 0xd:
217        if ((opcode >> 20) & 0x1)
218        {
219           switch ((opcode >> 8) & 0xf)
220           {
221              case 0x1: return PerformLDF(opcode); break;
222              case 0x2: return PerformLFM(opcode); break;
223              default: return 0;
224           }
225        }
226        else
227        {
228           switch ((opcode >> 8) & 0xf)
229           {
230              case 0x1: return PerformSTF(opcode); break;
231              case 0x2: return PerformSFM(opcode); break;
232              default: return 0;
233           }
234       }
235      break;
236 
237      case 0xe:
238        if (opcode & 0x10)
239          return EmulateCPDO(opcode);
240        else
241          return EmulateCPRT(opcode);
242      break;
243 
244      default: return 0;
245   }
246 }
247 #endif
248