xref: /openbmc/qemu/linux-user/arm/nwfpe/fpa11.c (revision 7f6c3d1a)
1 /*
2     NetWinder Floating Point Emulator
3     (c) Rebel.COM, 1998,1999
4 
5     Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
6 
7     This program is free software; you can redistribute it and/or modify
8     it under the terms of the GNU General Public License as published by
9     the Free Software Foundation; either version 2 of the License, or
10     (at your option) any later version.
11 
12     This program is distributed in the hope that it will be useful,
13     but WITHOUT ANY WARRANTY; without even the implied warranty of
14     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15     GNU General Public License for more details.
16 
17     You should have received a copy of the GNU General Public License
18     along with this program; if not, see <http://www.gnu.org/licenses/>.
19 */
20 
21 #include "qemu/osdep.h"
22 #include "fpa11.h"
23 
24 #include "fpopcode.h"
25 
26 //#include "fpmodule.h"
27 //#include "fpmodule.inl"
28 
29 //#include <asm/system.h>
30 
31 
32 FPA11* qemufpa = NULL;
33 CPUARMState* user_registers;
34 
35 /* Reset the FPA11 chip.  Called to initialize and reset the emulator. */
36 void resetFPA11(void)
37 {
38   int i;
39   FPA11 *fpa11 = GET_FPA11();
40 
41   /* initialize the register type array */
42   for (i=0;i<=7;i++)
43   {
44     fpa11->fType[i] = typeNone;
45   }
46 
47   /* FPSR: set system id to FP_EMULATOR, set AC, clear all other bits */
48   fpa11->fpsr = FP_EMULATOR | BIT_AC;
49 
50   /* FPCR: set SB, AB and DA bits, clear all others */
51 #ifdef MAINTAIN_FPCR
52   fpa11->fpcr = MASK_RESET;
53 #endif
54 }
55 
56 void SetRoundingMode(const unsigned int opcode)
57 {
58     int rounding_mode;
59    FPA11 *fpa11 = GET_FPA11();
60 
61 #ifdef MAINTAIN_FPCR
62    fpa11->fpcr &= ~MASK_ROUNDING_MODE;
63 #endif
64    switch (opcode & MASK_ROUNDING_MODE)
65    {
66       default:
67       case ROUND_TO_NEAREST:
68          rounding_mode = float_round_nearest_even;
69 #ifdef MAINTAIN_FPCR
70          fpa11->fpcr |= ROUND_TO_NEAREST;
71 #endif
72       break;
73 
74       case ROUND_TO_PLUS_INFINITY:
75          rounding_mode = float_round_up;
76 #ifdef MAINTAIN_FPCR
77          fpa11->fpcr |= ROUND_TO_PLUS_INFINITY;
78 #endif
79       break;
80 
81       case ROUND_TO_MINUS_INFINITY:
82          rounding_mode = float_round_down;
83 #ifdef MAINTAIN_FPCR
84          fpa11->fpcr |= ROUND_TO_MINUS_INFINITY;
85 #endif
86       break;
87 
88       case ROUND_TO_ZERO:
89          rounding_mode = float_round_to_zero;
90 #ifdef MAINTAIN_FPCR
91          fpa11->fpcr |= ROUND_TO_ZERO;
92 #endif
93       break;
94   }
95    set_float_rounding_mode(rounding_mode, &fpa11->fp_status);
96 }
97 
98 void SetRoundingPrecision(const unsigned int opcode)
99 {
100     int rounding_precision;
101    FPA11 *fpa11 = GET_FPA11();
102 #ifdef MAINTAIN_FPCR
103    fpa11->fpcr &= ~MASK_ROUNDING_PRECISION;
104 #endif
105    switch (opcode & MASK_ROUNDING_PRECISION)
106    {
107       case ROUND_SINGLE:
108          rounding_precision = 32;
109 #ifdef MAINTAIN_FPCR
110          fpa11->fpcr |= ROUND_SINGLE;
111 #endif
112       break;
113 
114       case ROUND_DOUBLE:
115          rounding_precision = 64;
116 #ifdef MAINTAIN_FPCR
117          fpa11->fpcr |= ROUND_DOUBLE;
118 #endif
119       break;
120 
121       case ROUND_EXTENDED:
122          rounding_precision = 80;
123 #ifdef MAINTAIN_FPCR
124          fpa11->fpcr |= ROUND_EXTENDED;
125 #endif
126       break;
127 
128       default: rounding_precision = 80;
129   }
130    set_floatx80_rounding_precision(rounding_precision, &fpa11->fp_status);
131 }
132 
133 /* Emulate the instruction in the opcode. */
134 /* ??? This is not thread safe.  */
135 unsigned int EmulateAll(unsigned int opcode, FPA11* qfpa, CPUARMState* qregs)
136 {
137   unsigned int nRc = 0;
138 //  unsigned long flags;
139   FPA11 *fpa11;
140   unsigned int cp;
141 //  save_flags(flags); sti();
142 
143   /* Check that this is really an FPA11 instruction: the coprocessor
144    * field in bits [11:8] must be 1 or 2.
145    */
146   cp = (opcode >> 8) & 0xf;
147   if (cp != 1 && cp != 2) {
148     return 0;
149   }
150 
151   qemufpa=qfpa;
152   user_registers=qregs;
153 
154 #if 0
155   fprintf(stderr,"emulating FP insn 0x%08x, PC=0x%08x\n",
156           opcode, qregs[ARM_REG_PC]);
157 #endif
158   fpa11 = GET_FPA11();
159 
160   if (fpa11->initflag == 0)		/* good place for __builtin_expect */
161   {
162     resetFPA11();
163     SetRoundingMode(ROUND_TO_NEAREST);
164     SetRoundingPrecision(ROUND_EXTENDED);
165     fpa11->initflag = 1;
166   }
167 
168   set_float_exception_flags(0, &fpa11->fp_status);
169 
170   if (TEST_OPCODE(opcode,MASK_CPRT))
171   {
172     //fprintf(stderr,"emulating CPRT\n");
173     /* Emulate conversion opcodes. */
174     /* Emulate register transfer opcodes. */
175     /* Emulate comparison opcodes. */
176     nRc = EmulateCPRT(opcode);
177   }
178   else if (TEST_OPCODE(opcode,MASK_CPDO))
179   {
180     //fprintf(stderr,"emulating CPDO\n");
181     /* Emulate monadic arithmetic opcodes. */
182     /* Emulate dyadic arithmetic opcodes. */
183     nRc = EmulateCPDO(opcode);
184   }
185   else if (TEST_OPCODE(opcode,MASK_CPDT))
186   {
187     //fprintf(stderr,"emulating CPDT\n");
188     /* Emulate load/store opcodes. */
189     /* Emulate load/store multiple opcodes. */
190     nRc = EmulateCPDT(opcode);
191   }
192   else
193   {
194     /* Invalid instruction detected.  Return FALSE. */
195     nRc = 0;
196   }
197 
198 //  restore_flags(flags);
199   if(nRc == 1 && get_float_exception_flags(&fpa11->fp_status))
200   {
201     //printf("fef 0x%x\n",float_exception_flags);
202     nRc = -get_float_exception_flags(&fpa11->fp_status);
203   }
204 
205   //printf("returning %d\n",nRc);
206   return(nRc);
207 }
208 
209 #if 0
210 unsigned int EmulateAll1(unsigned int opcode)
211 {
212   switch ((opcode >> 24) & 0xf)
213   {
214      case 0xc:
215      case 0xd:
216        if ((opcode >> 20) & 0x1)
217        {
218           switch ((opcode >> 8) & 0xf)
219           {
220              case 0x1: return PerformLDF(opcode); break;
221              case 0x2: return PerformLFM(opcode); break;
222              default: return 0;
223           }
224        }
225        else
226        {
227           switch ((opcode >> 8) & 0xf)
228           {
229              case 0x1: return PerformSTF(opcode); break;
230              case 0x2: return PerformSFM(opcode); break;
231              default: return 0;
232           }
233       }
234      break;
235 
236      case 0xe:
237        if (opcode & 0x10)
238          return EmulateCPDO(opcode);
239        else
240          return EmulateCPRT(opcode);
241      break;
242 
243      default: return 0;
244   }
245 }
246 #endif
247