1 /* 2 * qemu user cpu loop 3 * 4 * Copyright (c) 2003-2008 Fabrice Bellard 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License, or 9 * (at your option) any later version. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 * 16 * You should have received a copy of the GNU General Public License 17 * along with this program; if not, see <http://www.gnu.org/licenses/>. 18 */ 19 20 #include "qemu/osdep.h" 21 #include "qemu.h" 22 #include "user-internals.h" 23 #include "elf.h" 24 #include "user/cpu_loop.h" 25 #include "signal-common.h" 26 #include "semihosting/common-semi.h" 27 #include "exec/page-protection.h" 28 #include "exec/mmap-lock.h" 29 #include "user/page-protection.h" 30 #include "target/arm/syndrome.h" 31 32 #define get_user_code_u32(x, gaddr, env) \ 33 ({ abi_long __r = get_user_u32((x), (gaddr)); \ 34 if (!__r && bswap_code(arm_sctlr_b(env))) { \ 35 (x) = bswap32(x); \ 36 } \ 37 __r; \ 38 }) 39 40 /* 41 * Note that if we need to do data accesses here, they should do a 42 * bswap if arm_cpu_bswap_data() returns true. 43 */ 44 45 /* 46 * Similar to code in accel/tcg/user-exec.c, but outside the execution loop. 47 * Must be called with mmap_lock. 48 * We get the PC of the entry address - which is as good as anything, 49 * on a real kernel what you get depends on which mode it uses. 50 */ 51 static void *atomic_mmu_lookup(CPUArchState *env, uint32_t addr, int size) 52 { 53 int need_flags = PAGE_READ | PAGE_WRITE_ORG | PAGE_VALID; 54 int page_flags; 55 56 /* Enforce guest required alignment. */ 57 if (unlikely(addr & (size - 1))) { 58 force_sig_fault(TARGET_SIGBUS, TARGET_BUS_ADRALN, addr); 59 return NULL; 60 } 61 62 page_flags = page_get_flags(addr); 63 if (unlikely((page_flags & need_flags) != need_flags)) { 64 force_sig_fault(TARGET_SIGSEGV, 65 page_flags & PAGE_VALID ? 66 TARGET_SEGV_ACCERR : TARGET_SEGV_MAPERR, addr); 67 return NULL; 68 } 69 70 return g2h(env_cpu(env), addr); 71 } 72 73 /* 74 * See the Linux kernel's Documentation/arm/kernel_user_helpers.rst 75 * Input: 76 * r0 = oldval 77 * r1 = newval 78 * r2 = pointer to target value 79 * 80 * Output: 81 * r0 = 0 if *ptr was changed, non-0 if no exchange happened 82 * C set if *ptr was changed, clear if no exchange happened 83 */ 84 static void arm_kernel_cmpxchg32_helper(CPUARMState *env) 85 { 86 uint32_t oldval, newval, val, addr, cpsr, *host_addr; 87 88 /* Swap if host != guest endianness, for the host cmpxchg below */ 89 oldval = tswap32(env->regs[0]); 90 newval = tswap32(env->regs[1]); 91 addr = env->regs[2]; 92 93 mmap_lock(); 94 host_addr = atomic_mmu_lookup(env, addr, 4); 95 if (!host_addr) { 96 mmap_unlock(); 97 return; 98 } 99 100 val = qatomic_cmpxchg__nocheck(host_addr, oldval, newval); 101 mmap_unlock(); 102 103 cpsr = (val == oldval) * CPSR_C; 104 cpsr_write(env, cpsr, CPSR_C, CPSRWriteByInstr); 105 env->regs[0] = cpsr ? 0 : -1; 106 } 107 108 /* 109 * See the Linux kernel's Documentation/arm/kernel_user_helpers.rst 110 * Input: 111 * r0 = pointer to oldval 112 * r1 = pointer to newval 113 * r2 = pointer to target value 114 * 115 * Output: 116 * r0 = 0 if *ptr was changed, non-0 if no exchange happened 117 * C set if *ptr was changed, clear if no exchange happened 118 * 119 * Note segv's in kernel helpers are a bit tricky, we can set the 120 * data address sensibly but the PC address is just the entry point. 121 */ 122 static void arm_kernel_cmpxchg64_helper(CPUARMState *env) 123 { 124 uint64_t oldval, newval, val; 125 uint32_t addr, cpsr; 126 uint64_t *host_addr; 127 128 addr = env->regs[0]; 129 if (get_user_u64(oldval, addr)) { 130 goto segv; 131 } 132 133 addr = env->regs[1]; 134 if (get_user_u64(newval, addr)) { 135 goto segv; 136 } 137 138 mmap_lock(); 139 addr = env->regs[2]; 140 host_addr = atomic_mmu_lookup(env, addr, 8); 141 if (!host_addr) { 142 mmap_unlock(); 143 return; 144 } 145 146 /* Swap if host != guest endianness, for the host cmpxchg below */ 147 oldval = tswap64(oldval); 148 newval = tswap64(newval); 149 150 #ifdef CONFIG_ATOMIC64 151 val = qatomic_cmpxchg__nocheck(host_addr, oldval, newval); 152 cpsr = (val == oldval) * CPSR_C; 153 #else 154 /* 155 * This only works between threads, not between processes, but since 156 * the host has no 64-bit cmpxchg, it is the best that we can do. 157 */ 158 start_exclusive(); 159 val = *host_addr; 160 if (val == oldval) { 161 *host_addr = newval; 162 cpsr = CPSR_C; 163 } else { 164 cpsr = 0; 165 } 166 end_exclusive(); 167 #endif 168 mmap_unlock(); 169 170 cpsr_write(env, cpsr, CPSR_C, CPSRWriteByInstr); 171 env->regs[0] = cpsr ? 0 : -1; 172 return; 173 174 segv: 175 force_sig_fault(TARGET_SIGSEGV, 176 page_get_flags(addr) & PAGE_VALID ? 177 TARGET_SEGV_ACCERR : TARGET_SEGV_MAPERR, addr); 178 } 179 180 /* Handle a jump to the kernel code page. */ 181 static int 182 do_kernel_trap(CPUARMState *env) 183 { 184 uint32_t addr; 185 186 switch (env->regs[15]) { 187 case 0xffff0fa0: /* __kernel_memory_barrier */ 188 smp_mb(); 189 break; 190 case 0xffff0fc0: /* __kernel_cmpxchg */ 191 arm_kernel_cmpxchg32_helper(env); 192 break; 193 case 0xffff0fe0: /* __kernel_get_tls */ 194 env->regs[0] = cpu_get_tls(env); 195 break; 196 case 0xffff0f60: /* __kernel_cmpxchg64 */ 197 arm_kernel_cmpxchg64_helper(env); 198 break; 199 200 default: 201 return 1; 202 } 203 /* Jump back to the caller. */ 204 addr = env->regs[14]; 205 if (addr & 1) { 206 env->thumb = true; 207 addr &= ~1; 208 } 209 env->regs[15] = addr; 210 211 return 0; 212 } 213 214 static bool insn_is_linux_bkpt(uint32_t opcode, bool is_thumb) 215 { 216 /* 217 * Return true if this insn is one of the three magic UDF insns 218 * which the kernel treats as breakpoint insns. 219 */ 220 if (!is_thumb) { 221 return (opcode & 0x0fffffff) == 0x07f001f0; 222 } else { 223 /* 224 * Note that we get the two halves of the 32-bit T32 insn 225 * in the opposite order to the value the kernel uses in 226 * its undef_hook struct. 227 */ 228 return ((opcode & 0xffff) == 0xde01) || (opcode == 0xa000f7f0); 229 } 230 } 231 232 static bool emulate_arm_fpa11(CPUARMState *env, uint32_t opcode) 233 { 234 TaskState *ts = get_task_state(env_cpu(env)); 235 int rc = EmulateAll(opcode, &ts->fpa, env); 236 int raise, enabled; 237 238 if (rc == 0) { 239 /* Illegal instruction */ 240 return false; 241 } 242 if (rc > 0) { 243 /* Everything ok. */ 244 env->regs[15] += 4; 245 return true; 246 } 247 248 /* FP exception */ 249 rc = -rc; 250 raise = 0; 251 252 /* Translate softfloat flags to FPSR flags */ 253 if (rc & float_flag_invalid) { 254 raise |= BIT_IOC; 255 } 256 if (rc & float_flag_divbyzero) { 257 raise |= BIT_DZC; 258 } 259 if (rc & float_flag_overflow) { 260 raise |= BIT_OFC; 261 } 262 if (rc & float_flag_underflow) { 263 raise |= BIT_UFC; 264 } 265 if (rc & float_flag_inexact) { 266 raise |= BIT_IXC; 267 } 268 269 /* Accumulate unenabled exceptions */ 270 enabled = ts->fpa.fpsr >> 16; 271 ts->fpa.fpsr |= raise & ~enabled; 272 273 if (raise & enabled) { 274 /* 275 * The kernel's nwfpe emulator does not pass a real si_code. 276 * It merely uses send_sig(SIGFPE, current, 1), which results in 277 * __send_signal() filling out SI_KERNEL with pid and uid 0 (under 278 * the "SEND_SIG_PRIV" case). That's what our force_sig() does. 279 */ 280 force_sig(TARGET_SIGFPE); 281 } else { 282 env->regs[15] += 4; 283 } 284 return true; 285 } 286 287 void cpu_loop(CPUARMState *env) 288 { 289 CPUState *cs = env_cpu(env); 290 int trapnr, si_signo, si_code; 291 unsigned int n, insn; 292 abi_ulong ret; 293 294 for(;;) { 295 cpu_exec_start(cs); 296 trapnr = cpu_exec(cs); 297 cpu_exec_end(cs); 298 process_queued_cpu_work(cs); 299 300 switch(trapnr) { 301 case EXCP_UDEF: 302 case EXCP_NOCP: 303 case EXCP_INVSTATE: 304 { 305 uint32_t opcode; 306 307 /* we handle the FPU emulation here, as Linux */ 308 /* we get the opcode */ 309 /* FIXME - what to do if get_user() fails? */ 310 get_user_code_u32(opcode, env->regs[15], env); 311 312 /* 313 * The Linux kernel treats some UDF patterns specially 314 * to use as breakpoints (instead of the architectural 315 * bkpt insn). These should trigger a SIGTRAP rather 316 * than SIGILL. 317 */ 318 if (insn_is_linux_bkpt(opcode, env->thumb)) { 319 goto excp_debug; 320 } 321 322 if (!env->thumb && emulate_arm_fpa11(env, opcode)) { 323 break; 324 } 325 326 force_sig_fault(TARGET_SIGILL, TARGET_ILL_ILLOPN, 327 env->regs[15]); 328 } 329 break; 330 case EXCP_SWI: 331 { 332 env->eabi = true; 333 /* system call */ 334 if (env->thumb) { 335 /* Thumb is always EABI style with syscall number in r7 */ 336 n = env->regs[7]; 337 } else { 338 /* 339 * Equivalent of kernel CONFIG_OABI_COMPAT: read the 340 * Arm SVC insn to extract the immediate, which is the 341 * syscall number in OABI. 342 */ 343 /* FIXME - what to do if get_user() fails? */ 344 get_user_code_u32(insn, env->regs[15] - 4, env); 345 n = insn & 0xffffff; 346 if (n == 0) { 347 /* zero immediate: EABI, syscall number in r7 */ 348 n = env->regs[7]; 349 } else { 350 /* 351 * This XOR matches the kernel code: an immediate 352 * in the valid range (0x900000 .. 0x9fffff) is 353 * converted into the correct EABI-style syscall 354 * number; invalid immediates end up as values 355 * > 0xfffff and are handled below as out-of-range. 356 */ 357 n ^= ARM_SYSCALL_BASE; 358 env->eabi = false; 359 } 360 } 361 362 if (n > ARM_NR_BASE) { 363 switch (n) { 364 case ARM_NR_cacheflush: 365 /* nop */ 366 env->regs[0] = 0; 367 break; 368 case ARM_NR_set_tls: 369 cpu_set_tls(env, env->regs[0]); 370 env->regs[0] = 0; 371 break; 372 case ARM_NR_breakpoint: 373 env->regs[15] -= env->thumb ? 2 : 4; 374 goto excp_debug; 375 case ARM_NR_get_tls: 376 env->regs[0] = cpu_get_tls(env); 377 break; 378 default: 379 if (n < 0xf0800) { 380 /* 381 * Syscalls 0xf0000..0xf07ff (or 0x9f0000.. 382 * 0x9f07ff in OABI numbering) are defined 383 * to return -ENOSYS rather than raising 384 * SIGILL. Note that we have already 385 * removed the 0x900000 prefix. 386 */ 387 qemu_log_mask(LOG_UNIMP, 388 "qemu: Unsupported ARM syscall: 0x%x\n", 389 n); 390 env->regs[0] = -TARGET_ENOSYS; 391 } else { 392 /* 393 * Otherwise SIGILL. This includes any SWI with 394 * immediate not originally 0x9fxxxx, because 395 * of the earlier XOR. 396 * Like the real kernel, we report the addr of the 397 * SWI in the siginfo si_addr but leave the PC 398 * pointing at the insn after the SWI. 399 */ 400 abi_ulong faultaddr = env->regs[15]; 401 faultaddr -= env->thumb ? 2 : 4; 402 force_sig_fault(TARGET_SIGILL, TARGET_ILL_ILLTRP, 403 faultaddr); 404 } 405 break; 406 } 407 } else { 408 ret = do_syscall(env, 409 n, 410 env->regs[0], 411 env->regs[1], 412 env->regs[2], 413 env->regs[3], 414 env->regs[4], 415 env->regs[5], 416 0, 0); 417 if (ret == -QEMU_ERESTARTSYS) { 418 env->regs[15] -= env->thumb ? 2 : 4; 419 } else if (ret != -QEMU_ESIGRETURN) { 420 env->regs[0] = ret; 421 } 422 } 423 } 424 break; 425 case EXCP_SEMIHOST: 426 do_common_semihosting(cs); 427 env->regs[15] += env->thumb ? 2 : 4; 428 break; 429 case EXCP_INTERRUPT: 430 /* just indicate that signals should be handled asap */ 431 break; 432 case EXCP_PREFETCH_ABORT: 433 case EXCP_DATA_ABORT: 434 /* For user-only we don't set TTBCR_EAE, so look at the FSR. */ 435 switch (env->exception.fsr & 0x1f) { 436 case 0x1: /* Alignment */ 437 si_signo = TARGET_SIGBUS; 438 si_code = TARGET_BUS_ADRALN; 439 break; 440 case 0x3: /* Access flag fault, level 1 */ 441 case 0x6: /* Access flag fault, level 2 */ 442 case 0x9: /* Domain fault, level 1 */ 443 case 0xb: /* Domain fault, level 2 */ 444 case 0xd: /* Permission fault, level 1 */ 445 case 0xf: /* Permission fault, level 2 */ 446 si_signo = TARGET_SIGSEGV; 447 si_code = TARGET_SEGV_ACCERR; 448 break; 449 case 0x5: /* Translation fault, level 1 */ 450 case 0x7: /* Translation fault, level 2 */ 451 si_signo = TARGET_SIGSEGV; 452 si_code = TARGET_SEGV_MAPERR; 453 break; 454 default: 455 g_assert_not_reached(); 456 } 457 force_sig_fault(si_signo, si_code, env->exception.vaddress); 458 break; 459 case EXCP_DEBUG: 460 case EXCP_BKPT: 461 excp_debug: 462 force_sig_fault(TARGET_SIGTRAP, TARGET_TRAP_BRKPT, env->regs[15]); 463 break; 464 case EXCP_KERNEL_TRAP: 465 if (do_kernel_trap(env)) 466 goto error; 467 break; 468 case EXCP_YIELD: 469 /* nothing to do here for user-mode, just resume guest code */ 470 break; 471 case EXCP_ATOMIC: 472 cpu_exec_step_atomic(cs); 473 break; 474 default: 475 error: 476 EXCP_DUMP(env, "qemu: unhandled CPU exception 0x%x - aborting\n", trapnr); 477 abort(); 478 } 479 process_pending_signals(env); 480 } 481 } 482 483 void target_cpu_copy_regs(CPUArchState *env, target_pt_regs *regs) 484 { 485 CPUState *cpu = env_cpu(env); 486 TaskState *ts = get_task_state(cpu); 487 struct image_info *info = ts->info; 488 int i; 489 490 cpsr_write(env, regs->uregs[16], CPSR_USER | CPSR_EXEC, 491 CPSRWriteByInstr); 492 for(i = 0; i < 16; i++) { 493 env->regs[i] = regs->uregs[i]; 494 } 495 #if TARGET_BIG_ENDIAN 496 /* Enable BE8. */ 497 if (EF_ARM_EABI_VERSION(info->elf_flags) >= EF_ARM_EABI_VER4 498 && (info->elf_flags & EF_ARM_BE8)) { 499 env->uncached_cpsr |= CPSR_E; 500 env->cp15.sctlr_el[1] |= SCTLR_E0E; 501 } else { 502 env->cp15.sctlr_el[1] |= SCTLR_B; 503 } 504 arm_rebuild_hflags(env); 505 #endif 506 507 ts->stack_base = info->start_stack; 508 ts->heap_base = info->brk; 509 /* This will be filled in on the first SYS_HEAPINFO call. */ 510 ts->heap_limit = 0; 511 } 512