xref: /openbmc/qemu/include/sysemu/dma.h (revision 4c4465ff)
1 /*
2  * DMA helper functions
3  *
4  * Copyright (c) 2009, 2020 Red Hat
5  *
6  * This work is licensed under the terms of the GNU General Public License
7  * (GNU GPL), version 2 or later.
8  */
9 
10 #ifndef DMA_H
11 #define DMA_H
12 
13 #include "exec/memory.h"
14 #include "exec/address-spaces.h"
15 #include "block/block.h"
16 #include "block/accounting.h"
17 
18 typedef struct ScatterGatherEntry ScatterGatherEntry;
19 
20 typedef enum {
21     DMA_DIRECTION_TO_DEVICE = 0,
22     DMA_DIRECTION_FROM_DEVICE = 1,
23 } DMADirection;
24 
25 struct QEMUSGList {
26     ScatterGatherEntry *sg;
27     int nsg;
28     int nalloc;
29     size_t size;
30     DeviceState *dev;
31     AddressSpace *as;
32 };
33 
34 #ifndef CONFIG_USER_ONLY
35 
36 /*
37  * When an IOMMU is present, bus addresses become distinct from
38  * CPU/memory physical addresses and may be a different size.  Because
39  * the IOVA size depends more on the bus than on the platform, we more
40  * or less have to treat these as 64-bit always to cover all (or at
41  * least most) cases.
42  */
43 typedef uint64_t dma_addr_t;
44 
45 #define DMA_ADDR_BITS 64
46 #define DMA_ADDR_FMT "%" PRIx64
47 
48 static inline void dma_barrier(AddressSpace *as, DMADirection dir)
49 {
50     /*
51      * This is called before DMA read and write operations
52      * unless the _relaxed form is used and is responsible
53      * for providing some sane ordering of accesses vs
54      * concurrently running VCPUs.
55      *
56      * Users of map(), unmap() or lower level st/ld_*
57      * operations are responsible for providing their own
58      * ordering via barriers.
59      *
60      * This primitive implementation does a simple smp_mb()
61      * before each operation which provides pretty much full
62      * ordering.
63      *
64      * A smarter implementation can be devised if needed to
65      * use lighter barriers based on the direction of the
66      * transfer, the DMA context, etc...
67      */
68     smp_mb();
69 }
70 
71 /* Checks that the given range of addresses is valid for DMA.  This is
72  * useful for certain cases, but usually you should just use
73  * dma_memory_{read,write}() and check for errors */
74 static inline bool dma_memory_valid(AddressSpace *as,
75                                     dma_addr_t addr, dma_addr_t len,
76                                     DMADirection dir)
77 {
78     return address_space_access_valid(as, addr, len,
79                                       dir == DMA_DIRECTION_FROM_DEVICE,
80                                       MEMTXATTRS_UNSPECIFIED);
81 }
82 
83 static inline MemTxResult dma_memory_rw_relaxed(AddressSpace *as,
84                                                 dma_addr_t addr,
85                                                 void *buf, dma_addr_t len,
86                                                 DMADirection dir)
87 {
88     return address_space_rw(as, addr, MEMTXATTRS_UNSPECIFIED,
89                             buf, len, dir == DMA_DIRECTION_FROM_DEVICE);
90 }
91 
92 static inline MemTxResult dma_memory_read_relaxed(AddressSpace *as,
93                                                   dma_addr_t addr,
94                                                   void *buf, dma_addr_t len)
95 {
96     return dma_memory_rw_relaxed(as, addr, buf, len, DMA_DIRECTION_TO_DEVICE);
97 }
98 
99 static inline MemTxResult dma_memory_write_relaxed(AddressSpace *as,
100                                                    dma_addr_t addr,
101                                                    const void *buf,
102                                                    dma_addr_t len)
103 {
104     return dma_memory_rw_relaxed(as, addr, (void *)buf, len,
105                                  DMA_DIRECTION_FROM_DEVICE);
106 }
107 
108 /**
109  * dma_memory_rw: Read from or write to an address space from DMA controller.
110  *
111  * Return a MemTxResult indicating whether the operation succeeded
112  * or failed (eg unassigned memory, device rejected the transaction,
113  * IOMMU fault).
114  *
115  * @as: #AddressSpace to be accessed
116  * @addr: address within that address space
117  * @buf: buffer with the data transferred
118  * @len: the number of bytes to read or write
119  * @dir: indicates the transfer direction
120  */
121 static inline MemTxResult dma_memory_rw(AddressSpace *as, dma_addr_t addr,
122                                         void *buf, dma_addr_t len,
123                                         DMADirection dir)
124 {
125     dma_barrier(as, dir);
126 
127     return dma_memory_rw_relaxed(as, addr, buf, len, dir);
128 }
129 
130 /**
131  * dma_memory_read: Read from an address space from DMA controller.
132  *
133  * Return a MemTxResult indicating whether the operation succeeded
134  * or failed (eg unassigned memory, device rejected the transaction,
135  * IOMMU fault).  Called within RCU critical section.
136  *
137  * @as: #AddressSpace to be accessed
138  * @addr: address within that address space
139  * @buf: buffer with the data transferred
140  * @len: length of the data transferred
141  */
142 static inline MemTxResult dma_memory_read(AddressSpace *as, dma_addr_t addr,
143                                           void *buf, dma_addr_t len)
144 {
145     return dma_memory_rw(as, addr, buf, len, DMA_DIRECTION_TO_DEVICE);
146 }
147 
148 /**
149  * address_space_write: Write to address space from DMA controller.
150  *
151  * Return a MemTxResult indicating whether the operation succeeded
152  * or failed (eg unassigned memory, device rejected the transaction,
153  * IOMMU fault).
154  *
155  * @as: #AddressSpace to be accessed
156  * @addr: address within that address space
157  * @buf: buffer with the data transferred
158  * @len: the number of bytes to write
159  */
160 static inline MemTxResult dma_memory_write(AddressSpace *as, dma_addr_t addr,
161                                            const void *buf, dma_addr_t len)
162 {
163     return dma_memory_rw(as, addr, (void *)buf, len,
164                          DMA_DIRECTION_FROM_DEVICE);
165 }
166 
167 /**
168  * dma_memory_set: Fill memory with a constant byte from DMA controller.
169  *
170  * Return a MemTxResult indicating whether the operation succeeded
171  * or failed (eg unassigned memory, device rejected the transaction,
172  * IOMMU fault).
173  *
174  * @as: #AddressSpace to be accessed
175  * @addr: address within that address space
176  * @c: constant byte to fill the memory
177  * @len: the number of bytes to fill with the constant byte
178  */
179 MemTxResult dma_memory_set(AddressSpace *as, dma_addr_t addr,
180                            uint8_t c, dma_addr_t len);
181 
182 /**
183  * address_space_map: Map a physical memory region into a host virtual address.
184  *
185  * May map a subset of the requested range, given by and returned in @plen.
186  * May return %NULL and set *@plen to zero(0), if resources needed to perform
187  * the mapping are exhausted.
188  * Use only for reads OR writes - not for read-modify-write operations.
189  *
190  * @as: #AddressSpace to be accessed
191  * @addr: address within that address space
192  * @len: pointer to length of buffer; updated on return
193  * @dir: indicates the transfer direction
194  */
195 static inline void *dma_memory_map(AddressSpace *as,
196                                    dma_addr_t addr, dma_addr_t *len,
197                                    DMADirection dir)
198 {
199     hwaddr xlen = *len;
200     void *p;
201 
202     p = address_space_map(as, addr, &xlen, dir == DMA_DIRECTION_FROM_DEVICE,
203                           MEMTXATTRS_UNSPECIFIED);
204     *len = xlen;
205     return p;
206 }
207 
208 /**
209  * address_space_unmap: Unmaps a memory region previously mapped
210  *                      by dma_memory_map()
211  *
212  * Will also mark the memory as dirty if @dir == %DMA_DIRECTION_FROM_DEVICE.
213  * @access_len gives the amount of memory that was actually read or written
214  * by the caller.
215  *
216  * @as: #AddressSpace used
217  * @buffer: host pointer as returned by address_space_map()
218  * @len: buffer length as returned by address_space_map()
219  * @dir: indicates the transfer direction
220  * @access_len: amount of data actually transferred
221  */
222 static inline void dma_memory_unmap(AddressSpace *as,
223                                     void *buffer, dma_addr_t len,
224                                     DMADirection dir, dma_addr_t access_len)
225 {
226     address_space_unmap(as, buffer, (hwaddr)len,
227                         dir == DMA_DIRECTION_FROM_DEVICE, access_len);
228 }
229 
230 #define DEFINE_LDST_DMA(_lname, _sname, _bits, _end) \
231     static inline uint##_bits##_t ld##_lname##_##_end##_dma(AddressSpace *as, \
232                                                             dma_addr_t addr) \
233     {                                                                   \
234         uint##_bits##_t val;                                            \
235         dma_memory_read(as, addr, &val, (_bits) / 8);                   \
236         return _end##_bits##_to_cpu(val);                               \
237     }                                                                   \
238     static inline void st##_sname##_##_end##_dma(AddressSpace *as,      \
239                                                  dma_addr_t addr,       \
240                                                  uint##_bits##_t val)   \
241     {                                                                   \
242         val = cpu_to_##_end##_bits(val);                                \
243         dma_memory_write(as, addr, &val, (_bits) / 8);                  \
244     }
245 
246 static inline uint8_t ldub_dma(AddressSpace *as, dma_addr_t addr)
247 {
248     uint8_t val;
249 
250     dma_memory_read(as, addr, &val, 1);
251     return val;
252 }
253 
254 static inline void stb_dma(AddressSpace *as, dma_addr_t addr, uint8_t val)
255 {
256     dma_memory_write(as, addr, &val, 1);
257 }
258 
259 DEFINE_LDST_DMA(uw, w, 16, le);
260 DEFINE_LDST_DMA(l, l, 32, le);
261 DEFINE_LDST_DMA(q, q, 64, le);
262 DEFINE_LDST_DMA(uw, w, 16, be);
263 DEFINE_LDST_DMA(l, l, 32, be);
264 DEFINE_LDST_DMA(q, q, 64, be);
265 
266 #undef DEFINE_LDST_DMA
267 
268 struct ScatterGatherEntry {
269     dma_addr_t base;
270     dma_addr_t len;
271 };
272 
273 void qemu_sglist_init(QEMUSGList *qsg, DeviceState *dev, int alloc_hint,
274                       AddressSpace *as);
275 void qemu_sglist_add(QEMUSGList *qsg, dma_addr_t base, dma_addr_t len);
276 void qemu_sglist_destroy(QEMUSGList *qsg);
277 #endif
278 
279 typedef BlockAIOCB *DMAIOFunc(int64_t offset, QEMUIOVector *iov,
280                               BlockCompletionFunc *cb, void *cb_opaque,
281                               void *opaque);
282 
283 BlockAIOCB *dma_blk_io(AioContext *ctx,
284                        QEMUSGList *sg, uint64_t offset, uint32_t align,
285                        DMAIOFunc *io_func, void *io_func_opaque,
286                        BlockCompletionFunc *cb, void *opaque, DMADirection dir);
287 BlockAIOCB *dma_blk_read(BlockBackend *blk,
288                          QEMUSGList *sg, uint64_t offset, uint32_t align,
289                          BlockCompletionFunc *cb, void *opaque);
290 BlockAIOCB *dma_blk_write(BlockBackend *blk,
291                           QEMUSGList *sg, uint64_t offset, uint32_t align,
292                           BlockCompletionFunc *cb, void *opaque);
293 uint64_t dma_buf_read(uint8_t *ptr, int32_t len, QEMUSGList *sg);
294 uint64_t dma_buf_write(uint8_t *ptr, int32_t len, QEMUSGList *sg);
295 
296 void dma_acct_start(BlockBackend *blk, BlockAcctCookie *cookie,
297                     QEMUSGList *sg, enum BlockAcctType type);
298 
299 #endif
300