xref: /openbmc/qemu/include/hw/virtio/virtio-blk.h (revision 52f91c37)
1 /*
2  * Virtio Block Device
3  *
4  * Copyright IBM, Corp. 2007
5  *
6  * Authors:
7  *  Anthony Liguori   <aliguori@us.ibm.com>
8  *
9  * This work is licensed under the terms of the GNU GPL, version 2.  See
10  * the COPYING file in the top-level directory.
11  *
12  */
13 
14 #ifndef _QEMU_VIRTIO_BLK_H
15 #define _QEMU_VIRTIO_BLK_H
16 
17 #include "hw/virtio/virtio.h"
18 #include "hw/block/block.h"
19 #include "sysemu/iothread.h"
20 
21 #define TYPE_VIRTIO_BLK "virtio-blk-device"
22 #define VIRTIO_BLK(obj) \
23         OBJECT_CHECK(VirtIOBlock, (obj), TYPE_VIRTIO_BLK)
24 
25 /* from Linux's linux/virtio_blk.h */
26 
27 /* The ID for virtio_block */
28 #define VIRTIO_ID_BLOCK 2
29 
30 /* Feature bits */
31 #define VIRTIO_BLK_F_BARRIER    0       /* Does host support barriers? */
32 #define VIRTIO_BLK_F_SIZE_MAX   1       /* Indicates maximum segment size */
33 #define VIRTIO_BLK_F_SEG_MAX    2       /* Indicates maximum # of segments */
34 #define VIRTIO_BLK_F_GEOMETRY   4       /* Indicates support of legacy geometry */
35 #define VIRTIO_BLK_F_RO         5       /* Disk is read-only */
36 #define VIRTIO_BLK_F_BLK_SIZE   6       /* Block size of disk is available*/
37 #define VIRTIO_BLK_F_SCSI       7       /* Supports scsi command passthru */
38 /* #define VIRTIO_BLK_F_IDENTIFY   8       ATA IDENTIFY supported, DEPRECATED */
39 #define VIRTIO_BLK_F_WCE        9       /* write cache enabled */
40 #define VIRTIO_BLK_F_TOPOLOGY   10      /* Topology information is available */
41 #define VIRTIO_BLK_F_CONFIG_WCE 11      /* write cache configurable */
42 
43 #define VIRTIO_BLK_ID_BYTES     20      /* ID string length */
44 
45 struct virtio_blk_config
46 {
47     uint64_t capacity;
48     uint32_t size_max;
49     uint32_t seg_max;
50     uint16_t cylinders;
51     uint8_t heads;
52     uint8_t sectors;
53     uint32_t blk_size;
54     uint8_t physical_block_exp;
55     uint8_t alignment_offset;
56     uint16_t min_io_size;
57     uint32_t opt_io_size;
58     uint8_t wce;
59 } QEMU_PACKED;
60 
61 /* These two define direction. */
62 #define VIRTIO_BLK_T_IN         0
63 #define VIRTIO_BLK_T_OUT        1
64 
65 /* This bit says it's a scsi command, not an actual read or write. */
66 #define VIRTIO_BLK_T_SCSI_CMD   2
67 
68 /* Flush the volatile write cache */
69 #define VIRTIO_BLK_T_FLUSH      4
70 
71 /* return the device ID string */
72 #define VIRTIO_BLK_T_GET_ID     8
73 
74 /* Barrier before this op. */
75 #define VIRTIO_BLK_T_BARRIER    0x80000000
76 
77 /* This is the first element of the read scatter-gather list. */
78 struct virtio_blk_outhdr
79 {
80     /* VIRTIO_BLK_T* */
81     uint32_t type;
82     /* io priority. */
83     uint32_t ioprio;
84     /* Sector (ie. 512 byte offset) */
85     uint64_t sector;
86 };
87 
88 #define VIRTIO_BLK_S_OK         0
89 #define VIRTIO_BLK_S_IOERR      1
90 #define VIRTIO_BLK_S_UNSUPP     2
91 
92 /* This is the last element of the write scatter-gather list */
93 struct virtio_blk_inhdr
94 {
95     unsigned char status;
96 };
97 
98 /* SCSI pass-through header */
99 struct virtio_scsi_inhdr
100 {
101     uint32_t errors;
102     uint32_t data_len;
103     uint32_t sense_len;
104     uint32_t residual;
105 };
106 
107 struct VirtIOBlkConf
108 {
109     BlockConf conf;
110     IOThread *iothread;
111     char *serial;
112     uint32_t scsi;
113     uint32_t config_wce;
114     uint32_t data_plane;
115 };
116 
117 struct VirtIOBlockDataPlane;
118 
119 typedef struct VirtIOBlock {
120     VirtIODevice parent_obj;
121     BlockDriverState *bs;
122     VirtQueue *vq;
123     void *rq;
124     QEMUBH *bh;
125     BlockConf *conf;
126     VirtIOBlkConf blk;
127     unsigned short sector_mask;
128     bool original_wce;
129     VMChangeStateEntry *change;
130 #ifdef CONFIG_VIRTIO_BLK_DATA_PLANE
131     Notifier migration_state_notifier;
132     struct VirtIOBlockDataPlane *dataplane;
133 #endif
134 } VirtIOBlock;
135 
136 #define DEFINE_VIRTIO_BLK_FEATURES(_state, _field) \
137         DEFINE_VIRTIO_COMMON_FEATURES(_state, _field)
138 
139 #ifdef __linux__
140 #define DEFINE_VIRTIO_BLK_PROPERTIES(_state, _field)                          \
141         DEFINE_BLOCK_PROPERTIES(_state, _field.conf),                         \
142         DEFINE_BLOCK_CHS_PROPERTIES(_state, _field.conf),                     \
143         DEFINE_PROP_STRING("serial", _state, _field.serial),                  \
144         DEFINE_PROP_BIT("config-wce", _state, _field.config_wce, 0, true),    \
145         DEFINE_PROP_BIT("scsi", _state, _field.scsi, 0, true),                \
146         DEFINE_PROP_IOTHREAD("x-iothread", _state, _field.iothread)
147 #else
148 #define DEFINE_VIRTIO_BLK_PROPERTIES(_state, _field)                          \
149         DEFINE_BLOCK_PROPERTIES(_state, _field.conf),                         \
150         DEFINE_BLOCK_CHS_PROPERTIES(_state, _field.conf),                     \
151         DEFINE_PROP_STRING("serial", _state, _field.serial),                  \
152         DEFINE_PROP_BIT("config-wce", _state, _field.config_wce, 0, true),    \
153         DEFINE_PROP_IOTHREAD("x-iothread", _state, _field.iothread)
154 #endif /* __linux__ */
155 
156 void virtio_blk_set_conf(DeviceState *dev, VirtIOBlkConf *blk);
157 
158 #endif
159