xref: /openbmc/qemu/include/hw/virtio/virtio-blk.h (revision 1cf9412b)
1 /*
2  * Virtio Block Device
3  *
4  * Copyright IBM, Corp. 2007
5  *
6  * Authors:
7  *  Anthony Liguori   <aliguori@us.ibm.com>
8  *
9  * This work is licensed under the terms of the GNU GPL, version 2.  See
10  * the COPYING file in the top-level directory.
11  *
12  */
13 
14 #ifndef _QEMU_VIRTIO_BLK_H
15 #define _QEMU_VIRTIO_BLK_H
16 
17 #include "hw/virtio/virtio.h"
18 #include "hw/block/block.h"
19 
20 #define TYPE_VIRTIO_BLK "virtio-blk-device"
21 #define VIRTIO_BLK(obj) \
22         OBJECT_CHECK(VirtIOBlock, (obj), TYPE_VIRTIO_BLK)
23 
24 /* from Linux's linux/virtio_blk.h */
25 
26 /* The ID for virtio_block */
27 #define VIRTIO_ID_BLOCK 2
28 
29 /* Feature bits */
30 #define VIRTIO_BLK_F_BARRIER    0       /* Does host support barriers? */
31 #define VIRTIO_BLK_F_SIZE_MAX   1       /* Indicates maximum segment size */
32 #define VIRTIO_BLK_F_SEG_MAX    2       /* Indicates maximum # of segments */
33 #define VIRTIO_BLK_F_GEOMETRY   4       /* Indicates support of legacy geometry */
34 #define VIRTIO_BLK_F_RO         5       /* Disk is read-only */
35 #define VIRTIO_BLK_F_BLK_SIZE   6       /* Block size of disk is available*/
36 #define VIRTIO_BLK_F_SCSI       7       /* Supports scsi command passthru */
37 /* #define VIRTIO_BLK_F_IDENTIFY   8       ATA IDENTIFY supported, DEPRECATED */
38 #define VIRTIO_BLK_F_WCE        9       /* write cache enabled */
39 #define VIRTIO_BLK_F_TOPOLOGY   10      /* Topology information is available */
40 #define VIRTIO_BLK_F_CONFIG_WCE 11      /* write cache configurable */
41 
42 #define VIRTIO_BLK_ID_BYTES     20      /* ID string length */
43 
44 struct virtio_blk_config
45 {
46     uint64_t capacity;
47     uint32_t size_max;
48     uint32_t seg_max;
49     uint16_t cylinders;
50     uint8_t heads;
51     uint8_t sectors;
52     uint32_t blk_size;
53     uint8_t physical_block_exp;
54     uint8_t alignment_offset;
55     uint16_t min_io_size;
56     uint32_t opt_io_size;
57     uint8_t wce;
58 } QEMU_PACKED;
59 
60 /* These two define direction. */
61 #define VIRTIO_BLK_T_IN         0
62 #define VIRTIO_BLK_T_OUT        1
63 
64 /* This bit says it's a scsi command, not an actual read or write. */
65 #define VIRTIO_BLK_T_SCSI_CMD   2
66 
67 /* Flush the volatile write cache */
68 #define VIRTIO_BLK_T_FLUSH      4
69 
70 /* return the device ID string */
71 #define VIRTIO_BLK_T_GET_ID     8
72 
73 /* Barrier before this op. */
74 #define VIRTIO_BLK_T_BARRIER    0x80000000
75 
76 /* This is the first element of the read scatter-gather list. */
77 struct virtio_blk_outhdr
78 {
79     /* VIRTIO_BLK_T* */
80     uint32_t type;
81     /* io priority. */
82     uint32_t ioprio;
83     /* Sector (ie. 512 byte offset) */
84     uint64_t sector;
85 };
86 
87 #define VIRTIO_BLK_S_OK         0
88 #define VIRTIO_BLK_S_IOERR      1
89 #define VIRTIO_BLK_S_UNSUPP     2
90 
91 /* This is the last element of the write scatter-gather list */
92 struct virtio_blk_inhdr
93 {
94     unsigned char status;
95 };
96 
97 /* SCSI pass-through header */
98 struct virtio_scsi_inhdr
99 {
100     uint32_t errors;
101     uint32_t data_len;
102     uint32_t sense_len;
103     uint32_t residual;
104 };
105 
106 struct VirtIOBlkConf
107 {
108     BlockConf conf;
109     char *serial;
110     uint32_t scsi;
111     uint32_t config_wce;
112     uint32_t data_plane;
113 };
114 
115 struct VirtIOBlockDataPlane;
116 
117 typedef struct VirtIOBlock {
118     VirtIODevice parent_obj;
119     BlockDriverState *bs;
120     VirtQueue *vq;
121     void *rq;
122     QEMUBH *bh;
123     BlockConf *conf;
124     VirtIOBlkConf blk;
125     unsigned short sector_mask;
126     bool original_wce;
127     VMChangeStateEntry *change;
128 #ifdef CONFIG_VIRTIO_BLK_DATA_PLANE
129     Notifier migration_state_notifier;
130     struct VirtIOBlockDataPlane *dataplane;
131 #endif
132 } VirtIOBlock;
133 
134 #define DEFINE_VIRTIO_BLK_FEATURES(_state, _field) \
135         DEFINE_VIRTIO_COMMON_FEATURES(_state, _field)
136 
137 #ifdef __linux__
138 #define DEFINE_VIRTIO_BLK_PROPERTIES(_state, _field)                          \
139         DEFINE_BLOCK_PROPERTIES(_state, _field.conf),                         \
140         DEFINE_BLOCK_CHS_PROPERTIES(_state, _field.conf),                     \
141         DEFINE_PROP_STRING("serial", _state, _field.serial),                  \
142         DEFINE_PROP_BIT("config-wce", _state, _field.config_wce, 0, true),    \
143         DEFINE_PROP_BIT("scsi", _state, _field.scsi, 0, true)
144 #else
145 #define DEFINE_VIRTIO_BLK_PROPERTIES(_state, _field)                          \
146         DEFINE_BLOCK_PROPERTIES(_state, _field.conf),                         \
147         DEFINE_BLOCK_CHS_PROPERTIES(_state, _field.conf),                     \
148         DEFINE_PROP_STRING("serial", _state, _field.serial),                  \
149         DEFINE_PROP_BIT("config-wce", _state, _field.config_wce, 0, true)
150 #endif /* __linux__ */
151 
152 void virtio_blk_set_conf(DeviceState *dev, VirtIOBlkConf *blk);
153 
154 #endif
155