1 /* 2 * SD Association Host Standard Specification v2.0 controller emulation 3 * 4 * Copyright (c) 2011 Samsung Electronics Co., Ltd. 5 * Mitsyanko Igor <i.mitsyanko@samsung.com> 6 * Peter A.G. Crosthwaite <peter.crosthwaite@petalogix.com> 7 * 8 * Based on MMC controller for Samsung S5PC1xx-based board emulation 9 * by Alexey Merkulov and Vladimir Monakhov. 10 * 11 * This program is free software; you can redistribute it and/or modify it 12 * under the terms of the GNU General Public License as published by the 13 * Free Software Foundation; either version 2 of the License, or (at your 14 * option) any later version. 15 * 16 * This program is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 19 * See the GNU General Public License for more details. 20 * 21 * You should have received a copy of the GNU _General Public License along 22 * with this program; if not, see <http://www.gnu.org/licenses/>. 23 */ 24 25 #ifndef SDHCI_H 26 #define SDHCI_H 27 28 #include "qemu-common.h" 29 #include "hw/block/block.h" 30 #include "hw/pci/pci.h" 31 #include "hw/sysbus.h" 32 #include "hw/sd/sd.h" 33 34 /* SD/MMC host controller state */ 35 typedef struct SDHCIState { 36 union { 37 PCIDevice pcidev; 38 SysBusDevice busdev; 39 }; 40 SDState *card; 41 MemoryRegion iomem; 42 BlockBackend *blk; 43 44 QEMUTimer *insert_timer; /* timer for 'changing' sd card. */ 45 QEMUTimer *transfer_timer; 46 qemu_irq eject_cb; 47 qemu_irq ro_cb; 48 qemu_irq irq; 49 50 uint32_t sdmasysad; /* SDMA System Address register */ 51 uint16_t blksize; /* Host DMA Buff Boundary and Transfer BlkSize Reg */ 52 uint16_t blkcnt; /* Blocks count for current transfer */ 53 uint32_t argument; /* Command Argument Register */ 54 uint16_t trnmod; /* Transfer Mode Setting Register */ 55 uint16_t cmdreg; /* Command Register */ 56 uint32_t rspreg[4]; /* Response Registers 0-3 */ 57 uint32_t prnsts; /* Present State Register */ 58 uint8_t hostctl; /* Host Control Register */ 59 uint8_t pwrcon; /* Power control Register */ 60 uint8_t blkgap; /* Block Gap Control Register */ 61 uint8_t wakcon; /* WakeUp Control Register */ 62 uint16_t clkcon; /* Clock control Register */ 63 uint8_t timeoutcon; /* Timeout Control Register */ 64 uint8_t admaerr; /* ADMA Error Status Register */ 65 uint16_t norintsts; /* Normal Interrupt Status Register */ 66 uint16_t errintsts; /* Error Interrupt Status Register */ 67 uint16_t norintstsen; /* Normal Interrupt Status Enable Register */ 68 uint16_t errintstsen; /* Error Interrupt Status Enable Register */ 69 uint16_t norintsigen; /* Normal Interrupt Signal Enable Register */ 70 uint16_t errintsigen; /* Error Interrupt Signal Enable Register */ 71 uint16_t acmd12errsts; /* Auto CMD12 error status register */ 72 uint64_t admasysaddr; /* ADMA System Address Register */ 73 74 uint32_t capareg; /* Capabilities Register */ 75 uint32_t maxcurr; /* Maximum Current Capabilities Register */ 76 uint8_t *fifo_buffer; /* SD host i/o FIFO buffer */ 77 uint32_t buf_maxsz; 78 uint16_t data_count; /* current element in FIFO buffer */ 79 uint8_t stopped_state;/* Current SDHC state */ 80 /* Buffer Data Port Register - virtual access point to R and W buffers */ 81 /* Software Reset Register - always reads as 0 */ 82 /* Force Event Auto CMD12 Error Interrupt Reg - write only */ 83 /* Force Event Error Interrupt Register- write only */ 84 /* RO Host Controller Version Register always reads as 0x2401 */ 85 } SDHCIState; 86 87 #define TYPE_PCI_SDHCI "sdhci-pci" 88 #define PCI_SDHCI(obj) OBJECT_CHECK(SDHCIState, (obj), TYPE_PCI_SDHCI) 89 90 #define TYPE_SYSBUS_SDHCI "generic-sdhci" 91 #define SYSBUS_SDHCI(obj) \ 92 OBJECT_CHECK(SDHCIState, (obj), TYPE_SYSBUS_SDHCI) 93 94 #endif /* SDHCI_H */ 95