1 /* 2 * SD Memory Card emulation. Mostly correct for MMC too. 3 * 4 * Copyright (c) 2006 Andrzej Zaborowski <balrog@zabor.org> 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in 14 * the documentation and/or other materials provided with the 15 * distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' 18 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 19 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 20 * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR 21 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 22 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 23 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 24 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY 25 * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 26 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 27 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 28 */ 29 30 #ifndef HW_SD_H 31 #define HW_SD_H 32 33 #include "hw/qdev-core.h" 34 #include "qom/object.h" 35 36 #define OUT_OF_RANGE (1 << 31) 37 #define ADDRESS_ERROR (1 << 30) 38 #define BLOCK_LEN_ERROR (1 << 29) 39 #define ERASE_SEQ_ERROR (1 << 28) 40 #define ERASE_PARAM (1 << 27) 41 #define WP_VIOLATION (1 << 26) 42 #define CARD_IS_LOCKED (1 << 25) 43 #define LOCK_UNLOCK_FAILED (1 << 24) 44 #define COM_CRC_ERROR (1 << 23) 45 #define ILLEGAL_COMMAND (1 << 22) 46 #define CARD_ECC_FAILED (1 << 21) 47 #define CC_ERROR (1 << 20) 48 #define SD_ERROR (1 << 19) 49 #define CID_CSD_OVERWRITE (1 << 16) 50 #define WP_ERASE_SKIP (1 << 15) 51 #define CARD_ECC_DISABLED (1 << 14) 52 #define ERASE_RESET (1 << 13) 53 #define CURRENT_STATE (7 << 9) 54 #define READY_FOR_DATA (1 << 8) 55 #define APP_CMD (1 << 5) 56 #define AKE_SEQ_ERROR (1 << 3) 57 58 enum SDPhySpecificationVersion { 59 SD_PHY_SPECv1_10_VERS = 1, 60 SD_PHY_SPECv2_00_VERS = 2, 61 SD_PHY_SPECv3_01_VERS = 3, 62 }; 63 64 typedef enum { 65 SD_VOLTAGE_0_4V = 400, /* currently not supported */ 66 SD_VOLTAGE_1_8V = 1800, 67 SD_VOLTAGE_3_0V = 3000, 68 SD_VOLTAGE_3_3V = 3300, 69 } sd_voltage_mv_t; 70 71 typedef enum { 72 UHS_NOT_SUPPORTED = 0, 73 UHS_I = 1, 74 UHS_II = 2, /* currently not supported */ 75 UHS_III = 3, /* currently not supported */ 76 } sd_uhs_mode_t; 77 78 typedef enum { 79 sd_none = 0, 80 sd_spi, 81 sd_bc, /* broadcast -- no response */ 82 sd_bcr, /* broadcast with response */ 83 sd_ac, /* addressed -- no data transfer */ 84 sd_adtc, /* addressed with data transfer */ 85 } sd_cmd_type_t; 86 87 typedef struct { 88 uint8_t cmd; 89 uint32_t arg; 90 uint8_t crc; 91 } SDRequest; 92 93 94 #define TYPE_SD_CARD "sd-card" 95 OBJECT_DECLARE_TYPE(SDState, SDCardClass, SD_CARD) 96 97 #define TYPE_SD_CARD_SPI "sd-card-spi" 98 DECLARE_INSTANCE_CHECKER(SDState, SD_CARD_SPI, TYPE_SD_CARD_SPI) 99 100 struct SDCardClass { 101 /*< private >*/ 102 DeviceClass parent_class; 103 /*< public >*/ 104 105 int (*do_command)(SDState *sd, SDRequest *req, uint8_t *response); 106 /** 107 * Write a byte to a SD card. 108 * @sd: card 109 * @value: byte to write 110 * 111 * Write a byte on the data lines of a SD card. 112 */ 113 void (*write_byte)(SDState *sd, uint8_t value); 114 /** 115 * Read a byte from a SD card. 116 * @sd: card 117 * 118 * Read a byte from the data lines of a SD card. 119 * 120 * Return: byte value read 121 */ 122 uint8_t (*read_byte)(SDState *sd); 123 bool (*receive_ready)(SDState *sd); 124 bool (*data_ready)(SDState *sd); 125 void (*set_voltage)(SDState *sd, uint16_t millivolts); 126 uint8_t (*get_dat_lines)(SDState *sd); 127 bool (*get_cmd_line)(SDState *sd); 128 void (*enable)(SDState *sd, bool enable); 129 bool (*get_inserted)(SDState *sd); 130 bool (*get_readonly)(SDState *sd); 131 132 const struct SDProto *proto; 133 }; 134 135 #define TYPE_SD_BUS "sd-bus" 136 OBJECT_DECLARE_TYPE(SDBus, SDBusClass, 137 SD_BUS) 138 139 struct SDBus { 140 BusState qbus; 141 }; 142 143 struct SDBusClass { 144 /*< private >*/ 145 BusClass parent_class; 146 /*< public >*/ 147 148 /* These methods are called by the SD device to notify the controller 149 * when the card insertion or readonly status changes 150 */ 151 void (*set_inserted)(DeviceState *dev, bool inserted); 152 void (*set_readonly)(DeviceState *dev, bool readonly); 153 }; 154 155 /* Functions to be used by qdevified callers (working via 156 * an SDBus rather than directly with SDState) 157 */ 158 void sdbus_set_voltage(SDBus *sdbus, uint16_t millivolts); 159 uint8_t sdbus_get_dat_lines(SDBus *sdbus); 160 bool sdbus_get_cmd_line(SDBus *sdbus); 161 int sdbus_do_command(SDBus *sd, SDRequest *req, uint8_t *response); 162 /** 163 * Write a byte to a SD bus. 164 * @sd: bus 165 * @value: byte to write 166 * 167 * Write a byte on the data lines of a SD bus. 168 */ 169 void sdbus_write_byte(SDBus *sd, uint8_t value); 170 /** 171 * Read a byte from a SD bus. 172 * @sd: bus 173 * 174 * Read a byte from the data lines of a SD bus. 175 * 176 * Return: byte value read 177 */ 178 uint8_t sdbus_read_byte(SDBus *sd); 179 /** 180 * Write data to a SD bus. 181 * @sdbus: bus 182 * @buf: data to write 183 * @length: number of bytes to write 184 * 185 * Write multiple bytes of data on the data lines of a SD bus. 186 */ 187 void sdbus_write_data(SDBus *sdbus, const void *buf, size_t length); 188 /** 189 * Read data from a SD bus. 190 * @sdbus: bus 191 * @buf: buffer to read data into 192 * @length: number of bytes to read 193 * 194 * Read multiple bytes of data on the data lines of a SD bus. 195 */ 196 void sdbus_read_data(SDBus *sdbus, void *buf, size_t length); 197 bool sdbus_receive_ready(SDBus *sd); 198 bool sdbus_data_ready(SDBus *sd); 199 bool sdbus_get_inserted(SDBus *sd); 200 bool sdbus_get_readonly(SDBus *sd); 201 /** 202 * sdbus_reparent_card: Reparent an SD card from one controller to another 203 * @from: controller bus to remove card from 204 * @to: controller bus to move card to 205 * 206 * Reparent an SD card, effectively unplugging it from one controller 207 * and inserting it into another. This is useful for SoCs like the 208 * bcm2835 which have two SD controllers and connect a single SD card 209 * to them, selected by the guest reprogramming GPIO line routing. 210 */ 211 void sdbus_reparent_card(SDBus *from, SDBus *to); 212 213 /* Functions to be used by SD devices to report back to qdevified controllers */ 214 void sdbus_set_inserted(SDBus *sd, bool inserted); 215 void sdbus_set_readonly(SDBus *sd, bool inserted); 216 217 #endif /* HW_SD_H */ 218