1 /* 2 * SD Memory Card emulation. Mostly correct for MMC too. 3 * 4 * Copyright (c) 2006 Andrzej Zaborowski <balrog@zabor.org> 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in 14 * the documentation and/or other materials provided with the 15 * distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' 18 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 19 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 20 * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR 21 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 22 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 23 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 24 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY 25 * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 26 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 27 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 28 */ 29 30 #ifndef HW_SD_H 31 #define HW_SD_H 32 33 #include "hw/qdev.h" 34 35 #define OUT_OF_RANGE (1 << 31) 36 #define ADDRESS_ERROR (1 << 30) 37 #define BLOCK_LEN_ERROR (1 << 29) 38 #define ERASE_SEQ_ERROR (1 << 28) 39 #define ERASE_PARAM (1 << 27) 40 #define WP_VIOLATION (1 << 26) 41 #define CARD_IS_LOCKED (1 << 25) 42 #define LOCK_UNLOCK_FAILED (1 << 24) 43 #define COM_CRC_ERROR (1 << 23) 44 #define ILLEGAL_COMMAND (1 << 22) 45 #define CARD_ECC_FAILED (1 << 21) 46 #define CC_ERROR (1 << 20) 47 #define SD_ERROR (1 << 19) 48 #define CID_CSD_OVERWRITE (1 << 16) 49 #define WP_ERASE_SKIP (1 << 15) 50 #define CARD_ECC_DISABLED (1 << 14) 51 #define ERASE_RESET (1 << 13) 52 #define CURRENT_STATE (7 << 9) 53 #define READY_FOR_DATA (1 << 8) 54 #define APP_CMD (1 << 5) 55 #define AKE_SEQ_ERROR (1 << 3) 56 #define OCR_CCS_BITN 30 57 58 typedef enum { 59 sd_none = -1, 60 sd_bc = 0, /* broadcast -- no response */ 61 sd_bcr, /* broadcast with response */ 62 sd_ac, /* addressed -- no data transfer */ 63 sd_adtc, /* addressed with data transfer */ 64 } sd_cmd_type_t; 65 66 typedef struct { 67 uint8_t cmd; 68 uint32_t arg; 69 uint8_t crc; 70 } SDRequest; 71 72 typedef struct SDState SDState; 73 typedef struct SDBus SDBus; 74 75 #define TYPE_SD_CARD "sd-card" 76 #define SD_CARD(obj) OBJECT_CHECK(SDState, (obj), TYPE_SD_CARD) 77 #define SD_CARD_CLASS(klass) \ 78 OBJECT_CLASS_CHECK(SDCardClass, (klass), TYPE_SD_CARD) 79 #define SD_CARD_GET_CLASS(obj) \ 80 OBJECT_GET_CLASS(SDCardClass, (obj), TYPE_SD_CARD) 81 82 typedef struct { 83 /*< private >*/ 84 DeviceClass parent_class; 85 /*< public >*/ 86 87 int (*do_command)(SDState *sd, SDRequest *req, uint8_t *response); 88 void (*write_data)(SDState *sd, uint8_t value); 89 uint8_t (*read_data)(SDState *sd); 90 bool (*data_ready)(SDState *sd); 91 void (*enable)(SDState *sd, bool enable); 92 bool (*get_inserted)(SDState *sd); 93 bool (*get_readonly)(SDState *sd); 94 } SDCardClass; 95 96 #define TYPE_SD_BUS "sd-bus" 97 #define SD_BUS(obj) OBJECT_CHECK(SDBus, (obj), TYPE_SD_BUS) 98 #define SD_BUS_CLASS(klass) OBJECT_CLASS_CHECK(SDBusClass, (klass), TYPE_SD_BUS) 99 #define SD_BUS_GET_CLASS(obj) OBJECT_GET_CLASS(SDBusClass, (obj), TYPE_SD_BUS) 100 101 struct SDBus { 102 BusState qbus; 103 }; 104 105 typedef struct { 106 /*< private >*/ 107 BusClass parent_class; 108 /*< public >*/ 109 110 /* These methods are called by the SD device to notify the controller 111 * when the card insertion or readonly status changes 112 */ 113 void (*set_inserted)(DeviceState *dev, bool inserted); 114 void (*set_readonly)(DeviceState *dev, bool readonly); 115 } SDBusClass; 116 117 /* Legacy functions to be used only by non-qdevified callers */ 118 SDState *sd_init(BlockBackend *bs, bool is_spi); 119 int sd_do_command(SDState *sd, SDRequest *req, 120 uint8_t *response); 121 void sd_write_data(SDState *sd, uint8_t value); 122 uint8_t sd_read_data(SDState *sd); 123 void sd_set_cb(SDState *sd, qemu_irq readonly, qemu_irq insert); 124 bool sd_data_ready(SDState *sd); 125 /* sd_enable should not be used -- it is only used on the nseries boards, 126 * where it is part of a broken implementation of the MMC card slot switch 127 * (there should be two card slots which are multiplexed to a single MMC 128 * controller, but instead we model it with one card and controller and 129 * disable the card when the second slot is selected, so it looks like the 130 * second slot is always empty). 131 */ 132 void sd_enable(SDState *sd, bool enable); 133 134 /* Functions to be used by qdevified callers (working via 135 * an SDBus rather than directly with SDState) 136 */ 137 int sdbus_do_command(SDBus *sd, SDRequest *req, uint8_t *response); 138 void sdbus_write_data(SDBus *sd, uint8_t value); 139 uint8_t sdbus_read_data(SDBus *sd); 140 bool sdbus_data_ready(SDBus *sd); 141 bool sdbus_get_inserted(SDBus *sd); 142 bool sdbus_get_readonly(SDBus *sd); 143 /** 144 * sdbus_reparent_card: Reparent an SD card from one controller to another 145 * @from: controller bus to remove card from 146 * @to: controller bus to move card to 147 * 148 * Reparent an SD card, effectively unplugging it from one controller 149 * and inserting it into another. This is useful for SoCs like the 150 * bcm2835 which have two SD controllers and connect a single SD card 151 * to them, selected by the guest reprogramming GPIO line routing. 152 */ 153 void sdbus_reparent_card(SDBus *from, SDBus *to); 154 155 /* Functions to be used by SD devices to report back to qdevified controllers */ 156 void sdbus_set_inserted(SDBus *sd, bool inserted); 157 void sdbus_set_readonly(SDBus *sd, bool inserted); 158 159 #endif /* HW_SD_H */ 160