xref: /openbmc/qemu/include/hw/scsi/esp.h (revision a9ded601)
1 #ifndef QEMU_HW_ESP_H
2 #define QEMU_HW_ESP_H
3 
4 #include "hw/scsi/scsi.h"
5 
6 /* esp.c */
7 #define ESP_MAX_DEVS 7
8 typedef void (*ESPDMAMemoryReadWriteFunc)(void *opaque, uint8_t *buf, int len);
9 void esp_init(hwaddr espaddr, int it_shift,
10               ESPDMAMemoryReadWriteFunc dma_memory_read,
11               ESPDMAMemoryReadWriteFunc dma_memory_write,
12               void *dma_opaque, qemu_irq irq, qemu_irq *reset,
13               qemu_irq *dma_enable);
14 
15 #define ESP_REGS 16
16 #define TI_BUFSZ 16
17 #define ESP_CMDBUF_SZ 32
18 
19 typedef struct ESPState ESPState;
20 
21 struct ESPState {
22     uint8_t rregs[ESP_REGS];
23     uint8_t wregs[ESP_REGS];
24     qemu_irq irq;
25     uint8_t chip_id;
26     bool tchi_written;
27     int32_t ti_size;
28     uint32_t ti_rptr, ti_wptr;
29     uint32_t status;
30     uint32_t dma;
31     uint8_t ti_buf[TI_BUFSZ];
32     SCSIBus bus;
33     SCSIDevice *current_dev;
34     SCSIRequest *current_req;
35     uint8_t cmdbuf[ESP_CMDBUF_SZ];
36     uint32_t cmdlen;
37     uint32_t do_cmd;
38 
39     /* The amount of data left in the current DMA transfer.  */
40     uint32_t dma_left;
41     /* The size of the current DMA transfer.  Zero if no transfer is in
42        progress.  */
43     uint32_t dma_counter;
44     int dma_enabled;
45 
46     uint32_t async_len;
47     uint8_t *async_buf;
48 
49     ESPDMAMemoryReadWriteFunc dma_memory_read;
50     ESPDMAMemoryReadWriteFunc dma_memory_write;
51     void *dma_opaque;
52     void (*dma_cb)(ESPState *s);
53 };
54 
55 #define ESP_TCLO   0x0
56 #define ESP_TCMID  0x1
57 #define ESP_FIFO   0x2
58 #define ESP_CMD    0x3
59 #define ESP_RSTAT  0x4
60 #define ESP_WBUSID 0x4
61 #define ESP_RINTR  0x5
62 #define ESP_WSEL   0x5
63 #define ESP_RSEQ   0x6
64 #define ESP_WSYNTP 0x6
65 #define ESP_RFLAGS 0x7
66 #define ESP_WSYNO  0x7
67 #define ESP_CFG1   0x8
68 #define ESP_RRES1  0x9
69 #define ESP_WCCF   0x9
70 #define ESP_RRES2  0xa
71 #define ESP_WTEST  0xa
72 #define ESP_CFG2   0xb
73 #define ESP_CFG3   0xc
74 #define ESP_RES3   0xd
75 #define ESP_TCHI   0xe
76 #define ESP_RES4   0xf
77 
78 #define CMD_DMA 0x80
79 #define CMD_CMD 0x7f
80 
81 #define CMD_NOP      0x00
82 #define CMD_FLUSH    0x01
83 #define CMD_RESET    0x02
84 #define CMD_BUSRESET 0x03
85 #define CMD_TI       0x10
86 #define CMD_ICCS     0x11
87 #define CMD_MSGACC   0x12
88 #define CMD_PAD      0x18
89 #define CMD_SATN     0x1a
90 #define CMD_RSTATN   0x1b
91 #define CMD_SEL      0x41
92 #define CMD_SELATN   0x42
93 #define CMD_SELATNS  0x43
94 #define CMD_ENSEL    0x44
95 #define CMD_DISSEL   0x45
96 
97 #define STAT_DO 0x00
98 #define STAT_DI 0x01
99 #define STAT_CD 0x02
100 #define STAT_ST 0x03
101 #define STAT_MO 0x06
102 #define STAT_MI 0x07
103 #define STAT_PIO_MASK 0x06
104 
105 #define STAT_TC 0x10
106 #define STAT_PE 0x20
107 #define STAT_GE 0x40
108 #define STAT_INT 0x80
109 
110 #define BUSID_DID 0x07
111 
112 #define INTR_FC 0x08
113 #define INTR_BS 0x10
114 #define INTR_DC 0x20
115 #define INTR_RST 0x80
116 
117 #define SEQ_0 0x0
118 #define SEQ_CD 0x4
119 
120 #define CFG1_RESREPT 0x40
121 
122 #define TCHI_FAS100A 0x4
123 #define TCHI_AM53C974 0x12
124 
125 void esp_dma_enable(ESPState *s, int irq, int level);
126 void esp_request_cancelled(SCSIRequest *req);
127 void esp_command_complete(SCSIRequest *req, uint32_t status, size_t resid);
128 void esp_transfer_data(SCSIRequest *req, uint32_t len);
129 void esp_hard_reset(ESPState *s);
130 uint64_t esp_reg_read(ESPState *s, uint32_t saddr);
131 void esp_reg_write(ESPState *s, uint32_t saddr, uint64_t val);
132 extern const VMStateDescription vmstate_esp;
133 
134 #endif
135