xref: /openbmc/qemu/include/hw/pci/pcie_aer.h (revision 750541c4)
1 /*
2  * pcie_aer.h
3  *
4  * Copyright (c) 2010 Isaku Yamahata <yamahata at valinux co jp>
5  *                    VA Linux Systems Japan K.K.
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License as published by
9  * the Free Software Foundation; either version 2 of the License, or
10  * (at your option) any later version.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15  * GNU General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License along
18  * with this program; if not, see <http://www.gnu.org/licenses/>.
19  */
20 
21 #ifndef QEMU_PCIE_AER_H
22 #define QEMU_PCIE_AER_H
23 
24 #include "hw/hw.h"
25 
26 /* definitions which PCIExpressDevice uses */
27 
28 /* AER log */
29 struct PCIEAERLog {
30     /* This structure is saved/loaded.
31        So explicitly size them instead of unsigned int */
32 
33     /* the number of currently recorded log in log member */
34     uint16_t log_num;
35 
36     /*
37      * The maximum number of the log. Errors can be logged up to this.
38      *
39      * This is configurable property.
40      * The specified value will be clipped down to PCIE_AER_LOG_MAX_LIMIT
41      * to avoid unreasonable memory usage.
42      * I bet that 128 log size would be big enough, otherwise too many errors
43      * for system to function normaly. But could consecutive errors occur?
44      */
45 #define PCIE_AER_LOG_MAX_DEFAULT        8
46 #define PCIE_AER_LOG_MAX_LIMIT          128
47     uint16_t log_max;
48 
49     /* Error log. log_max-sized array */
50     PCIEAERErr *log;
51 };
52 
53 /* aer error message: error signaling message has only error severity and
54    source id. See 2.2.8.3 error signaling messages */
55 struct PCIEAERMsg {
56     /*
57      * PCI_ERR_ROOT_CMD_{COR, NONFATAL, FATAL}_EN
58      * = PCI_EXP_DEVCTL_{CERE, NFERE, FERE}
59      */
60     uint32_t severity;
61 
62     uint16_t source_id; /* bdf */
63 };
64 
65 static inline bool
66 pcie_aer_msg_is_uncor(const PCIEAERMsg *msg)
67 {
68     return msg->severity == PCI_ERR_ROOT_CMD_NONFATAL_EN ||
69         msg->severity == PCI_ERR_ROOT_CMD_FATAL_EN;
70 }
71 
72 /* error */
73 struct PCIEAERErr {
74     uint32_t status;    /* error status bits */
75     uint16_t source_id; /* bdf */
76 
77 #define PCIE_AER_ERR_IS_CORRECTABLE     0x1     /* correctable/uncorrectable */
78 #define PCIE_AER_ERR_MAYBE_ADVISORY     0x2     /* maybe advisory non-fatal */
79 #define PCIE_AER_ERR_HEADER_VALID       0x4     /* TLP header is logged */
80 #define PCIE_AER_ERR_TLP_PREFIX_PRESENT 0x8     /* TLP Prefix is logged */
81     uint16_t flags;
82 
83     uint32_t header[4]; /* TLP header */
84     uint32_t prefix[4]; /* TLP header prefix */
85 };
86 
87 extern const VMStateDescription vmstate_pcie_aer_log;
88 
89 int pcie_aer_init(PCIDevice *dev, uint8_t cap_ver, uint16_t offset,
90                   uint16_t size, Error **errp);
91 void pcie_aer_exit(PCIDevice *dev);
92 void pcie_aer_write_config(PCIDevice *dev,
93                            uint32_t addr, uint32_t val, int len);
94 
95 /* aer root port */
96 void pcie_aer_root_set_vector(PCIDevice *dev, unsigned int vector);
97 void pcie_aer_root_init(PCIDevice *dev);
98 void pcie_aer_root_reset(PCIDevice *dev);
99 void pcie_aer_root_write_config(PCIDevice *dev,
100                                 uint32_t addr, uint32_t val, int len,
101                                 uint32_t root_cmd_prev);
102 
103 #endif /* QEMU_PCIE_AER_H */
104