xref: /openbmc/qemu/include/hw/pci/pcie_aer.h (revision 2993683b)
1 /*
2  * pcie_aer.h
3  *
4  * Copyright (c) 2010 Isaku Yamahata <yamahata at valinux co jp>
5  *                    VA Linux Systems Japan K.K.
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License as published by
9  * the Free Software Foundation; either version 2 of the License, or
10  * (at your option) any later version.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15  * GNU General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License along
18  * with this program; if not, see <http://www.gnu.org/licenses/>.
19  */
20 
21 #ifndef QEMU_PCIE_AER_H
22 #define QEMU_PCIE_AER_H
23 
24 #include "hw/hw.h"
25 
26 /* definitions which PCIExpressDevice uses */
27 
28 /* AER log */
29 struct PCIEAERLog {
30     /* This structure is saved/loaded.
31        So explicitly size them instead of unsigned int */
32 
33     /* the number of currently recorded log in log member */
34     uint16_t log_num;
35 
36     /*
37      * The maximum number of the log. Errors can be logged up to this.
38      *
39      * This is configurable property.
40      * The specified value will be clipped down to PCIE_AER_LOG_MAX_LIMIT
41      * to avoid unreasonable memory usage.
42      * I bet that 128 log size would be big enough, otherwise too many errors
43      * for system to function normaly. But could consecutive errors occur?
44      */
45 #define PCIE_AER_LOG_MAX_DEFAULT        8
46 #define PCIE_AER_LOG_MAX_LIMIT          128
47 #define PCIE_AER_LOG_MAX_UNSET          0xffff
48     uint16_t log_max;
49 
50     /* Error log. log_max-sized array */
51     PCIEAERErr *log;
52 };
53 
54 /* aer error message: error signaling message has only error sevirity and
55    source id. See 2.2.8.3 error signaling messages */
56 struct PCIEAERMsg {
57     /*
58      * PCI_ERR_ROOT_CMD_{COR, NONFATAL, FATAL}_EN
59      * = PCI_EXP_DEVCTL_{CERE, NFERE, FERE}
60      */
61     uint32_t severity;
62 
63     uint16_t source_id; /* bdf */
64 };
65 
66 static inline bool
67 pcie_aer_msg_is_uncor(const PCIEAERMsg *msg)
68 {
69     return msg->severity == PCI_ERR_ROOT_CMD_NONFATAL_EN ||
70         msg->severity == PCI_ERR_ROOT_CMD_FATAL_EN;
71 }
72 
73 /* error */
74 struct PCIEAERErr {
75     uint32_t status;    /* error status bits */
76     uint16_t source_id; /* bdf */
77 
78 #define PCIE_AER_ERR_IS_CORRECTABLE     0x1     /* correctable/uncorrectable */
79 #define PCIE_AER_ERR_MAYBE_ADVISORY     0x2     /* maybe advisory non-fatal */
80 #define PCIE_AER_ERR_HEADER_VALID       0x4     /* TLP header is logged */
81 #define PCIE_AER_ERR_TLP_PREFIX_PRESENT 0x8     /* TLP Prefix is logged */
82     uint16_t flags;
83 
84     uint32_t header[4]; /* TLP header */
85     uint32_t prefix[4]; /* TLP header prefix */
86 };
87 
88 extern const VMStateDescription vmstate_pcie_aer_log;
89 
90 int pcie_aer_init(PCIDevice *dev, uint16_t offset);
91 void pcie_aer_exit(PCIDevice *dev);
92 void pcie_aer_write_config(PCIDevice *dev,
93                            uint32_t addr, uint32_t val, int len);
94 
95 /* aer root port */
96 void pcie_aer_root_set_vector(PCIDevice *dev, unsigned int vector);
97 void pcie_aer_root_init(PCIDevice *dev);
98 void pcie_aer_root_reset(PCIDevice *dev);
99 void pcie_aer_root_write_config(PCIDevice *dev,
100                                 uint32_t addr, uint32_t val, int len,
101                                 uint32_t root_cmd_prev);
102 
103 /* error injection */
104 int pcie_aer_inject_error(PCIDevice *dev, const PCIEAERErr *err);
105 
106 #endif /* QEMU_PCIE_AER_H */
107