1 /* 2 * ARM TrustZone peripheral protection controller emulation 3 * 4 * Copyright (c) 2018 Linaro Limited 5 * Written by Peter Maydell 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License version 2 or 9 * (at your option) any later version. 10 */ 11 12 /* This is a model of the TrustZone peripheral protection controller (PPC). 13 * It is documented in the ARM CoreLink SIE-200 System IP for Embedded TRM 14 * (DDI 0571G): 15 * https://developer.arm.com/products/architecture/m-profile/docs/ddi0571/g 16 * 17 * The PPC sits in front of peripherals and allows secure software to 18 * configure it to either pass through or reject transactions. 19 * Rejected transactions may be configured to either be aborted, or to 20 * behave as RAZ/WI. An interrupt can be signalled for a rejected transaction. 21 * 22 * The PPC has no register interface -- it is configured purely by a 23 * collection of input signals from other hardware in the system. Typically 24 * they are either hardwired or exposed in an ad-hoc register interface by 25 * the SoC that uses the PPC. 26 * 27 * This QEMU model can be used to model either the AHB5 or APB4 TZ PPC, 28 * since the only difference between them is that the AHB version has a 29 * "default" port which has no security checks applied. In QEMU the default 30 * port can be emulated simply by wiring its downstream devices directly 31 * into the parent address space, since the PPC does not need to intercept 32 * transactions there. 33 * 34 * In the hardware, selection of which downstream port to use is done by 35 * the user's decode logic asserting one of the hsel[] signals. In QEMU, 36 * we provide 16 MMIO regions, one per port, and the user maps these into 37 * the desired addresses to implement the address decode. 38 * 39 * QEMU interface: 40 * + sysbus MMIO regions 0..15: MemoryRegions defining the upstream end 41 * of each of the 16 ports of the PPC. When a port is unused (i.e. no 42 * downstream MemoryRegion is connected to it) at the end of the 0..15 43 * range then no sysbus MMIO region is created for its upstream. When an 44 * unused port lies in the middle of the range with other used ports at 45 * higher port numbers, a dummy MMIO region is created to ensure that 46 * port N's upstream is always sysbus MMIO region N. Dummy regions should 47 * not be mapped, and will assert if any access is made to them. 48 * + Property "port[0..15]": MemoryRegion defining the downstream device(s) 49 * for each of the 16 ports of the PPC 50 * + Named GPIO inputs "cfg_nonsec[0..15]": set to 1 if the port should be 51 * accessible to NonSecure transactions 52 * + Named GPIO inputs "cfg_ap[0..15]": set to 1 if the port should be 53 * accessible to non-privileged transactions 54 * + Named GPIO input "cfg_sec_resp": set to 1 if a rejected transaction should 55 * result in a transaction error, or 0 for the transaction to RAZ/WI 56 * + Named GPIO input "irq_enable": set to 1 to enable interrupts 57 * + Named GPIO input "irq_clear": set to 1 to clear a pending interrupt 58 * + Named GPIO output "irq": set for a transaction-failed interrupt 59 * + Property "NONSEC_MASK": if a bit is set in this mask then accesses to 60 * the associated port do not have the TZ security check performed. (This 61 * corresponds to the hardware allowing this to be set as a Verilog 62 * parameter.) 63 */ 64 65 #ifndef TZ_PPC_H 66 #define TZ_PPC_H 67 68 #include "hw/sysbus.h" 69 #include "qom/object.h" 70 71 #define TYPE_TZ_PPC "tz-ppc" 72 OBJECT_DECLARE_SIMPLE_TYPE(TZPPC, TZ_PPC) 73 74 #define TZ_NUM_PORTS 16 75 76 77 typedef struct TZPPCPort { 78 TZPPC *ppc; 79 MemoryRegion upstream; 80 AddressSpace downstream_as; 81 MemoryRegion *downstream; 82 } TZPPCPort; 83 84 struct TZPPC { 85 /*< private >*/ 86 SysBusDevice parent_obj; 87 88 /*< public >*/ 89 90 /* State: these just track the values of our input signals */ 91 bool cfg_nonsec[TZ_NUM_PORTS]; 92 bool cfg_ap[TZ_NUM_PORTS]; 93 bool cfg_sec_resp; 94 bool irq_enable; 95 bool irq_clear; 96 /* State: are we asserting irq ? */ 97 bool irq_status; 98 99 qemu_irq irq; 100 101 /* Properties */ 102 uint32_t nonsec_mask; 103 104 TZPPCPort port[TZ_NUM_PORTS]; 105 }; 106 107 #endif 108