1 /* 2 * ARM IoT Kit security controller 3 * 4 * Copyright (c) 2018 Linaro Limited 5 * Written by Peter Maydell 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License version 2 or 9 * (at your option) any later version. 10 */ 11 12 /* This is a model of the security controller which is part of the 13 * Arm IoT Kit and documented in 14 * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html 15 * 16 * QEMU interface: 17 * + sysbus MMIO region 0 is the "secure privilege control block" registers 18 * + sysbus MMIO region 1 is the "non-secure privilege control block" registers 19 * + named GPIO output "sec_resp_cfg" indicating whether blocked accesses 20 * should RAZ/WI or bus error 21 * + named GPIO output "nsc_cfg" whose value tracks the NSCCFG register value 22 * Controlling the 2 APB PPCs in the IoTKit: 23 * + named GPIO outputs apb_ppc0_nonsec[0..2] and apb_ppc1_nonsec 24 * + named GPIO outputs apb_ppc0_ap[0..2] and apb_ppc1_ap 25 * + named GPIO outputs apb_ppc{0,1}_irq_enable 26 * + named GPIO outputs apb_ppc{0,1}_irq_clear 27 * + named GPIO inputs apb_ppc{0,1}_irq_status 28 * Controlling each of the 4 expansion APB PPCs which a system using the IoTKit 29 * might provide: 30 * + named GPIO outputs apb_ppcexp{0,1,2,3}_nonsec[0..15] 31 * + named GPIO outputs apb_ppcexp{0,1,2,3}_ap[0..15] 32 * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_enable 33 * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_clear 34 * + named GPIO inputs apb_ppcexp{0,1,2,3}_irq_status 35 * Controlling each of the 4 expansion AHB PPCs which a system using the IoTKit 36 * might provide: 37 * + named GPIO outputs ahb_ppcexp{0,1,2,3}_nonsec[0..15] 38 * + named GPIO outputs ahb_ppcexp{0,1,2,3}_ap[0..15] 39 * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_enable 40 * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_clear 41 * + named GPIO inputs ahb_ppcexp{0,1,2,3}_irq_status 42 */ 43 44 #ifndef IOTKIT_SECCTL_H 45 #define IOTKIT_SECCTL_H 46 47 #include "hw/sysbus.h" 48 49 #define TYPE_IOTKIT_SECCTL "iotkit-secctl" 50 #define IOTKIT_SECCTL(obj) OBJECT_CHECK(IoTKitSecCtl, (obj), TYPE_IOTKIT_SECCTL) 51 52 #define IOTS_APB_PPC0_NUM_PORTS 3 53 #define IOTS_APB_PPC1_NUM_PORTS 1 54 #define IOTS_PPC_NUM_PORTS 16 55 #define IOTS_NUM_APB_PPC 2 56 #define IOTS_NUM_APB_EXP_PPC 4 57 #define IOTS_NUM_AHB_EXP_PPC 4 58 59 typedef struct IoTKitSecCtl IoTKitSecCtl; 60 61 /* State and IRQ lines relating to a PPC. For the 62 * PPCs in the IoTKit not all the IRQ lines are used. 63 */ 64 typedef struct IoTKitSecCtlPPC { 65 qemu_irq nonsec[IOTS_PPC_NUM_PORTS]; 66 qemu_irq ap[IOTS_PPC_NUM_PORTS]; 67 qemu_irq irq_enable; 68 qemu_irq irq_clear; 69 70 uint32_t ns; 71 uint32_t sp; 72 uint32_t nsp; 73 74 /* Number of ports actually present */ 75 int numports; 76 /* Offset of this PPC's interrupt bits in SECPPCINTSTAT */ 77 int irq_bit_offset; 78 IoTKitSecCtl *parent; 79 } IoTKitSecCtlPPC; 80 81 struct IoTKitSecCtl { 82 /*< private >*/ 83 SysBusDevice parent_obj; 84 85 /*< public >*/ 86 qemu_irq sec_resp_cfg; 87 qemu_irq nsc_cfg_irq; 88 89 MemoryRegion s_regs; 90 MemoryRegion ns_regs; 91 92 uint32_t secppcintstat; 93 uint32_t secppcinten; 94 uint32_t secrespcfg; 95 uint32_t nsccfg; 96 uint32_t brginten; 97 98 IoTKitSecCtlPPC apb[IOTS_NUM_APB_PPC]; 99 IoTKitSecCtlPPC apbexp[IOTS_NUM_APB_EXP_PPC]; 100 IoTKitSecCtlPPC ahbexp[IOTS_NUM_APB_EXP_PPC]; 101 }; 102 103 #endif 104