1 /* 2 * ASPEED System Control Unit 3 * 4 * Andrew Jeffery <andrew@aj.id.au> 5 * 6 * Copyright 2016 IBM Corp. 7 * 8 * This code is licensed under the GPL version 2 or later. See 9 * the COPYING file in the top-level directory. 10 */ 11 #ifndef ASPEED_SCU_H 12 #define ASPEED_SCU_H 13 14 #include "hw/sysbus.h" 15 16 #define TYPE_ASPEED_SCU "aspeed.scu" 17 #define ASPEED_SCU(obj) OBJECT_CHECK(AspeedSCUState, (obj), TYPE_ASPEED_SCU) 18 #define TYPE_ASPEED_2400_SCU TYPE_ASPEED_SCU "-ast2400" 19 #define TYPE_ASPEED_2500_SCU TYPE_ASPEED_SCU "-ast2500" 20 #define TYPE_ASPEED_2600_SCU TYPE_ASPEED_SCU "-ast2600" 21 22 #define ASPEED_SCU_NR_REGS (0x1A8 >> 2) 23 #define ASPEED_AST2600_SCU_NR_REGS (0xE20 >> 2) 24 25 typedef struct AspeedSCUState { 26 /*< private >*/ 27 SysBusDevice parent_obj; 28 29 /*< public >*/ 30 MemoryRegion iomem; 31 32 uint32_t regs[ASPEED_AST2600_SCU_NR_REGS]; 33 uint32_t silicon_rev; 34 uint32_t hw_strap1; 35 uint32_t hw_strap2; 36 uint32_t hw_prot_key; 37 } AspeedSCUState; 38 39 #define AST2400_A0_SILICON_REV 0x02000303U 40 #define AST2400_A1_SILICON_REV 0x02010303U 41 #define AST2500_A0_SILICON_REV 0x04000303U 42 #define AST2500_A1_SILICON_REV 0x04010303U 43 #define AST2600_A0_SILICON_REV 0x05000303U 44 #define AST2600_A1_SILICON_REV 0x05010303U 45 46 #define ASPEED_IS_AST2500(si_rev) ((((si_rev) >> 24) & 0xff) == 0x04) 47 48 extern bool is_supported_silicon_rev(uint32_t silicon_rev); 49 50 #define ASPEED_SCU_CLASS(klass) \ 51 OBJECT_CLASS_CHECK(AspeedSCUClass, (klass), TYPE_ASPEED_SCU) 52 #define ASPEED_SCU_GET_CLASS(obj) \ 53 OBJECT_GET_CLASS(AspeedSCUClass, (obj), TYPE_ASPEED_SCU) 54 55 typedef struct AspeedSCUClass { 56 SysBusDeviceClass parent_class; 57 58 const uint32_t *resets; 59 uint32_t (*calc_hpll)(AspeedSCUState *s, uint32_t hpll_reg); 60 uint32_t apb_divider; 61 uint32_t nr_regs; 62 const MemoryRegionOps *ops; 63 } AspeedSCUClass; 64 65 #define ASPEED_SCU_PROT_KEY 0x1688A8A8 66 67 uint32_t aspeed_scu_get_apb_freq(AspeedSCUState *s); 68 69 /* 70 * Extracted from Aspeed SDK v00.03.21. Fixes and extra definitions 71 * were added. 72 * 73 * Original header file : 74 * arch/arm/mach-aspeed/include/mach/regs-scu.h 75 * 76 * Copyright (C) 2012-2020 ASPEED Technology Inc. 77 * 78 * This program is free software; you can redistribute it and/or modify 79 * it under the terms of the GNU General Public License version 2 as 80 * published by the Free Software Foundation. 81 * 82 * History : 83 * 1. 2012/12/29 Ryan Chen Create 84 */ 85 86 /* SCU08 Clock Selection Register 87 * 88 * 31 Enable Video Engine clock dynamic slow down 89 * 30:28 Video Engine clock slow down setting 90 * 27 2D Engine GCLK clock source selection 91 * 26 2D Engine GCLK clock throttling enable 92 * 25:23 APB PCLK divider selection 93 * 22:20 LPC Host LHCLK divider selection 94 * 19 LPC Host LHCLK clock generation/output enable control 95 * 18:16 MAC AHB bus clock divider selection 96 * 15 SD/SDIO clock running enable 97 * 14:12 SD/SDIO divider selection 98 * 11 Reserved 99 * 10:8 Video port output clock delay control bit 100 * 7 ARM CPU/AHB clock slow down enable 101 * 6:4 ARM CPU/AHB clock slow down setting 102 * 3:2 ECLK clock source selection 103 * 1 CPU/AHB clock slow down idle timer 104 * 0 CPU/AHB clock dynamic slow down enable (defined in bit[6:4]) 105 */ 106 #define SCU_CLK_GET_PCLK_DIV(x) (((x) >> 23) & 0x7) 107 108 /* SCU24 H-PLL Parameter Register (for Aspeed AST2400 SOC) 109 * 110 * 18 H-PLL parameter selection 111 * 0: Select H-PLL by strapping resistors 112 * 1: Select H-PLL by the programmed registers (SCU24[17:0]) 113 * 17 Enable H-PLL bypass mode 114 * 16 Turn off H-PLL 115 * 10:5 H-PLL Numerator 116 * 4 H-PLL Output Divider 117 * 3:0 H-PLL Denumerator 118 * 119 * (Output frequency) = 24MHz * (2-OD) * [(Numerator+2) / (Denumerator+1)] 120 */ 121 122 #define SCU_AST2400_H_PLL_PROGRAMMED (0x1 << 18) 123 #define SCU_AST2400_H_PLL_BYPASS_EN (0x1 << 17) 124 #define SCU_AST2400_H_PLL_OFF (0x1 << 16) 125 126 /* SCU24 H-PLL Parameter Register (for Aspeed AST2500 SOC) 127 * 128 * 21 Enable H-PLL reset 129 * 20 Enable H-PLL bypass mode 130 * 19 Turn off H-PLL 131 * 18:13 H-PLL Post Divider 132 * 12:5 H-PLL Numerator (M) 133 * 4:0 H-PLL Denumerator (N) 134 * 135 * (Output frequency) = CLKIN(24MHz) * [(M+1) / (N+1)] / (P+1) 136 * 137 * The default frequency is 792Mhz when CLKIN = 24MHz 138 */ 139 140 #define SCU_H_PLL_BYPASS_EN (0x1 << 20) 141 #define SCU_H_PLL_OFF (0x1 << 19) 142 143 /* SCU70 Hardware Strapping Register definition (for Aspeed AST2400 SOC) 144 * 145 * 31:29 Software defined strapping registers 146 * 28:27 DRAM size setting (for VGA driver use) 147 * 26:24 DRAM configuration setting 148 * 23 Enable 25 MHz reference clock input 149 * 22 Enable GPIOE pass-through mode 150 * 21 Enable GPIOD pass-through mode 151 * 20 Disable LPC to decode SuperIO 0x2E/0x4E address 152 * 19 Disable ACPI function 153 * 23,18 Clock source selection 154 * 17 Enable BMC 2nd boot watchdog timer 155 * 16 SuperIO configuration address selection 156 * 15 VGA Class Code selection 157 * 14 Enable LPC dedicated reset pin function 158 * 13:12 SPI mode selection 159 * 11:10 CPU/AHB clock frequency ratio selection 160 * 9:8 H-PLL default clock frequency selection 161 * 7 Define MAC#2 interface 162 * 6 Define MAC#1 interface 163 * 5 Enable VGA BIOS ROM 164 * 4 Boot flash memory extended option 165 * 3:2 VGA memory size selection 166 * 1:0 BMC CPU boot code selection 167 */ 168 #define SCU_AST2400_HW_STRAP_SW_DEFINE(x) ((x) << 29) 169 #define SCU_AST2400_HW_STRAP_SW_DEFINE_MASK (0x7 << 29) 170 171 #define SCU_AST2400_HW_STRAP_DRAM_SIZE(x) ((x) << 27) 172 #define SCU_AST2400_HW_STRAP_DRAM_SIZE_MASK (0x3 << 27) 173 #define DRAM_SIZE_64MB 0 174 #define DRAM_SIZE_128MB 1 175 #define DRAM_SIZE_256MB 2 176 #define DRAM_SIZE_512MB 3 177 178 #define SCU_AST2400_HW_STRAP_DRAM_CONFIG(x) ((x) << 24) 179 #define SCU_AST2400_HW_STRAP_DRAM_CONFIG_MASK (0x7 << 24) 180 181 #define SCU_HW_STRAP_GPIOE_PT_EN (0x1 << 22) 182 #define SCU_HW_STRAP_GPIOD_PT_EN (0x1 << 21) 183 #define SCU_HW_STRAP_LPC_DEC_SUPER_IO (0x1 << 20) 184 #define SCU_AST2400_HW_STRAP_ACPI_DIS (0x1 << 19) 185 186 /* bit 23, 18 [1,0] */ 187 #define SCU_AST2400_HW_STRAP_SET_CLK_SOURCE(x) (((((x) & 0x3) >> 1) << 23) \ 188 | (((x) & 0x1) << 18)) 189 #define SCU_AST2400_HW_STRAP_GET_CLK_SOURCE(x) (((((x) >> 23) & 0x1) << 1) \ 190 | (((x) >> 18) & 0x1)) 191 #define SCU_AST2400_HW_STRAP_CLK_SOURCE_MASK ((0x1 << 23) | (0x1 << 18)) 192 #define SCU_HW_STRAP_CLK_25M_IN (0x1 << 23) 193 #define AST2400_CLK_24M_IN 0 194 #define AST2400_CLK_48M_IN 1 195 #define AST2400_CLK_25M_IN_24M_USB_CKI 2 196 #define AST2400_CLK_25M_IN_48M_USB_CKI 3 197 198 #define SCU_HW_STRAP_CLK_48M_IN (0x1 << 18) 199 #define SCU_HW_STRAP_2ND_BOOT_WDT (0x1 << 17) 200 #define SCU_HW_STRAP_SUPER_IO_CONFIG (0x1 << 16) 201 #define SCU_HW_STRAP_VGA_CLASS_CODE (0x1 << 15) 202 #define SCU_HW_STRAP_LPC_RESET_PIN (0x1 << 14) 203 204 #define SCU_HW_STRAP_SPI_MODE(x) ((x) << 12) 205 #define SCU_HW_STRAP_SPI_MODE_MASK (0x3 << 12) 206 #define SCU_HW_STRAP_SPI_DIS 0 207 #define SCU_HW_STRAP_SPI_MASTER 1 208 #define SCU_HW_STRAP_SPI_M_S_EN 2 209 #define SCU_HW_STRAP_SPI_PASS_THROUGH 3 210 211 #define SCU_AST2400_HW_STRAP_SET_CPU_AHB_RATIO(x) ((x) << 10) 212 #define SCU_AST2400_HW_STRAP_GET_CPU_AHB_RATIO(x) (((x) >> 10) & 3) 213 #define SCU_AST2400_HW_STRAP_CPU_AHB_RATIO_MASK (0x3 << 10) 214 #define AST2400_CPU_AHB_RATIO_1_1 0 215 #define AST2400_CPU_AHB_RATIO_2_1 1 216 #define AST2400_CPU_AHB_RATIO_4_1 2 217 #define AST2400_CPU_AHB_RATIO_3_1 3 218 219 #define SCU_AST2400_HW_STRAP_GET_H_PLL_CLK(x) (((x) >> 8) & 0x3) 220 #define SCU_AST2400_HW_STRAP_H_PLL_CLK_MASK (0x3 << 8) 221 #define AST2400_CPU_384MHZ 0 222 #define AST2400_CPU_360MHZ 1 223 #define AST2400_CPU_336MHZ 2 224 #define AST2400_CPU_408MHZ 3 225 226 #define SCU_HW_STRAP_MAC1_RGMII (0x1 << 7) 227 #define SCU_HW_STRAP_MAC0_RGMII (0x1 << 6) 228 #define SCU_HW_STRAP_VGA_BIOS_ROM (0x1 << 5) 229 #define SCU_HW_STRAP_SPI_WIDTH (0x1 << 4) 230 231 #define SCU_HW_STRAP_VGA_SIZE_GET(x) (((x) >> 2) & 0x3) 232 #define SCU_HW_STRAP_VGA_MASK (0x3 << 2) 233 #define SCU_HW_STRAP_VGA_SIZE_SET(x) ((x) << 2) 234 #define VGA_8M_DRAM 0 235 #define VGA_16M_DRAM 1 236 #define VGA_32M_DRAM 2 237 #define VGA_64M_DRAM 3 238 239 #define SCU_AST2400_HW_STRAP_BOOT_MODE(x) (x) 240 #define AST2400_NOR_BOOT 0 241 #define AST2400_NAND_BOOT 1 242 #define AST2400_SPI_BOOT 2 243 #define AST2400_DIS_BOOT 3 244 245 /* 246 * SCU70 Hardware strapping register definition (for Aspeed AST2500 247 * SoC and higher) 248 * 249 * 31 Enable SPI Flash Strap Auto Fetch Mode 250 * 30 Enable GPIO Strap Mode 251 * 29 Select UART Debug Port 252 * 28 Reserved (1) 253 * 27 Enable fast reset mode for ARM ICE debugger 254 * 26 Enable eSPI flash mode 255 * 25 Enable eSPI mode 256 * 24 Select DDR4 SDRAM 257 * 23 Select 25 MHz reference clock input mode 258 * 22 Enable GPIOE pass-through mode 259 * 21 Enable GPIOD pass-through mode 260 * 20 Disable LPC to decode SuperIO 0x2E/0x4E address 261 * 19 Enable ACPI function 262 * 18 Select USBCKI input frequency 263 * 17 Enable BMC 2nd boot watchdog timer 264 * 16 SuperIO configuration address selection 265 * 15 VGA Class Code selection 266 * 14 Select dedicated LPC reset input 267 * 13:12 SPI mode selection 268 * 11:9 AXI/AHB clock frequency ratio selection 269 * 8 Reserved (0) 270 * 7 Define MAC#2 interface 271 * 6 Define MAC#1 interface 272 * 5 Enable dedicated VGA BIOS ROM 273 * 4 Reserved (0) 274 * 3:2 VGA memory size selection 275 * 1 Reserved (1) 276 * 0 Disable CPU boot 277 */ 278 #define SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE (0x1 << 31) 279 #define SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE (0x1 << 30) 280 #define SCU_AST2500_HW_STRAP_UART_DEBUG (0x1 << 29) 281 #define UART_DEBUG_UART1 0 282 #define UART_DEBUG_UART5 1 283 #define SCU_AST2500_HW_STRAP_RESERVED28 (0x1 << 28) 284 285 #define SCU_AST2500_HW_STRAP_FAST_RESET_DBG (0x1 << 27) 286 #define SCU_AST2500_HW_STRAP_ESPI_FLASH_ENABLE (0x1 << 26) 287 #define SCU_AST2500_HW_STRAP_ESPI_ENABLE (0x1 << 25) 288 #define SCU_AST2500_HW_STRAP_DDR4_ENABLE (0x1 << 24) 289 #define SCU_AST2500_HW_STRAP_25HZ_CLOCK_MODE (0x1 << 23) 290 291 #define SCU_AST2500_HW_STRAP_ACPI_ENABLE (0x1 << 19) 292 #define SCU_AST2500_HW_STRAP_USBCKI_FREQ (0x1 << 18) 293 #define USBCKI_FREQ_24MHZ 0 294 #define USBCKI_FREQ_28MHZ 1 295 296 #define SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(x) ((x) << 9) 297 #define SCU_AST2500_HW_STRAP_GET_AXI_AHB_RATIO(x) (((x) >> 9) & 7) 298 #define SCU_AST2500_HW_STRAP_CPU_AXI_RATIO_MASK (0x7 << 9) 299 #define AXI_AHB_RATIO_UNDEFINED 0 300 #define AXI_AHB_RATIO_2_1 1 301 #define AXI_AHB_RATIO_3_1 2 302 #define AXI_AHB_RATIO_4_1 3 303 #define AXI_AHB_RATIO_5_1 4 304 #define AXI_AHB_RATIO_6_1 5 305 #define AXI_AHB_RATIO_7_1 6 306 #define AXI_AHB_RATIO_8_1 7 307 308 #define SCU_AST2500_HW_STRAP_RESERVED1 (0x1 << 1) 309 #define SCU_AST2500_HW_STRAP_DIS_BOOT (0x1 << 0) 310 311 #define AST2500_HW_STRAP1_DEFAULTS ( \ 312 SCU_AST2500_HW_STRAP_RESERVED28 | \ 313 SCU_HW_STRAP_2ND_BOOT_WDT | \ 314 SCU_HW_STRAP_VGA_CLASS_CODE | \ 315 SCU_HW_STRAP_LPC_RESET_PIN | \ 316 SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(AXI_AHB_RATIO_2_1) | \ 317 SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) | \ 318 SCU_AST2500_HW_STRAP_RESERVED1) 319 320 #endif /* ASPEED_SCU_H */ 321