1 #ifndef LOADER_H 2 #define LOADER_H 3 #include "hw/nvram/fw_cfg.h" 4 5 /* loader.c */ 6 /** 7 * get_image_size: retrieve size of an image file 8 * @filename: Path to the image file 9 * 10 * Returns the size of the image file on success, -1 otherwise. 11 * On error, errno is also set as appropriate. 12 */ 13 int64_t get_image_size(const char *filename); 14 /** 15 * load_image_size: load an image file into specified buffer 16 * @filename: Path to the image file 17 * @addr: Buffer to load image into 18 * @size: Size of buffer in bytes 19 * 20 * Load an image file from disk into the specified buffer. 21 * If the image is larger than the specified buffer, only 22 * @size bytes are read (this is not considered an error). 23 * 24 * Prefer to use the GLib function g_file_get_contents() rather 25 * than a "get_image_size()/g_malloc()/load_image_size()" sequence. 26 * 27 * Returns the number of bytes read, or -1 on error. On error, 28 * errno is also set as appropriate. 29 */ 30 ssize_t load_image_size(const char *filename, void *addr, size_t size); 31 32 /**load_image_targphys_as: 33 * @filename: Path to the image file 34 * @addr: Address to load the image to 35 * @max_sz: The maximum size of the image to load 36 * @as: The AddressSpace to load the ELF to. The value of address_space_memory 37 * is used if nothing is supplied here. 38 * 39 * Load a fixed image into memory. 40 * 41 * Returns the size of the loaded image on success, -1 otherwise. 42 */ 43 int load_image_targphys_as(const char *filename, 44 hwaddr addr, uint64_t max_sz, AddressSpace *as); 45 46 /**load_targphys_hex_as: 47 * @filename: Path to the .hex file 48 * @entry: Store the entry point given by the .hex file 49 * @as: The AddressSpace to load the .hex file to. The value of 50 * address_space_memory is used if nothing is supplied here. 51 * 52 * Load a fixed .hex file into memory. 53 * 54 * Returns the size of the loaded .hex file on success, -1 otherwise. 55 */ 56 int load_targphys_hex_as(const char *filename, hwaddr *entry, AddressSpace *as); 57 58 /** load_image_targphys: 59 * Same as load_image_targphys_as(), but doesn't allow the caller to specify 60 * an AddressSpace. 61 */ 62 int load_image_targphys(const char *filename, hwaddr, 63 uint64_t max_sz); 64 65 /** 66 * load_image_mr: load an image into a memory region 67 * @filename: Path to the image file 68 * @mr: Memory Region to load into 69 * 70 * Load the specified file into the memory region. 71 * The file loaded is registered as a ROM, so its contents will be 72 * reinstated whenever the system is reset. 73 * If the file is larger than the memory region's size the call will fail. 74 * Returns -1 on failure, or the size of the file. 75 */ 76 int load_image_mr(const char *filename, MemoryRegion *mr); 77 78 /* This is the limit on the maximum uncompressed image size that 79 * load_image_gzipped_buffer() and load_image_gzipped() will read. It prevents 80 * g_malloc() in those functions from allocating a huge amount of memory. 81 */ 82 #define LOAD_IMAGE_MAX_GUNZIP_BYTES (256 << 20) 83 84 int load_image_gzipped_buffer(const char *filename, uint64_t max_sz, 85 uint8_t **buffer); 86 int load_image_gzipped(const char *filename, hwaddr addr, uint64_t max_sz); 87 88 #define ELF_LOAD_FAILED -1 89 #define ELF_LOAD_NOT_ELF -2 90 #define ELF_LOAD_WRONG_ARCH -3 91 #define ELF_LOAD_WRONG_ENDIAN -4 92 #define ELF_LOAD_TOO_BIG -5 93 const char *load_elf_strerror(int error); 94 95 /** load_elf_ram_sym: 96 * @filename: Path of ELF file 97 * @elf_note_fn: optional function to parse ELF Note type 98 * passed via @translate_opaque 99 * @translate_fn: optional function to translate load addresses 100 * @translate_opaque: opaque data passed to @translate_fn 101 * @pentry: Populated with program entry point. Ignored if NULL. 102 * @lowaddr: Populated with lowest loaded address. Ignored if NULL. 103 * @highaddr: Populated with highest loaded address. Ignored if NULL. 104 * @pflags: Populated with ELF processor-specific flags. Ignore if NULL. 105 * @bigendian: Expected ELF endianness. 0 for LE otherwise BE 106 * @elf_machine: Expected ELF machine type 107 * @clear_lsb: Set to mask off LSB of addresses (Some architectures use 108 * this for non-address data) 109 * @data_swab: Set to order of byte swapping for data. 0 for no swap, 1 110 * for swapping bytes within halfwords, 2 for bytes within 111 * words and 3 for within doublewords. 112 * @as: The AddressSpace to load the ELF to. The value of address_space_memory 113 * is used if nothing is supplied here. 114 * @load_rom : Load ELF binary as ROM 115 * @sym_cb: Callback function for symbol table entries 116 * 117 * Load an ELF file's contents to the emulated system's address space. 118 * Clients may optionally specify a callback to perform address 119 * translations. @pentry, @lowaddr and @highaddr are optional pointers 120 * which will be populated with various load information. @bigendian and 121 * @elf_machine give the expected endianness and machine for the ELF the 122 * load will fail if the target ELF does not match. Some architectures 123 * have some architecture-specific behaviours that come into effect when 124 * their particular values for @elf_machine are set. 125 * If @elf_machine is EM_NONE then the machine type will be read from the 126 * ELF header and no checks will be carried out against the machine type. 127 */ 128 typedef void (*symbol_fn_t)(const char *st_name, int st_info, 129 uint64_t st_value, uint64_t st_size); 130 131 int load_elf_ram_sym(const char *filename, 132 uint64_t (*elf_note_fn)(void *, void *, bool), 133 uint64_t (*translate_fn)(void *, uint64_t), 134 void *translate_opaque, uint64_t *pentry, 135 uint64_t *lowaddr, uint64_t *highaddr, uint32_t *pflags, 136 int big_endian, int elf_machine, 137 int clear_lsb, int data_swab, 138 AddressSpace *as, bool load_rom, symbol_fn_t sym_cb); 139 140 /** load_elf_ram: 141 * Same as load_elf_ram_sym(), but doesn't allow the caller to specify a 142 * symbol callback function 143 */ 144 int load_elf_ram(const char *filename, 145 uint64_t (*elf_note_fn)(void *, void *, bool), 146 uint64_t (*translate_fn)(void *, uint64_t), 147 void *translate_opaque, uint64_t *pentry, uint64_t *lowaddr, 148 uint64_t *highaddr, uint32_t *pflags, int big_endian, 149 int elf_machine, int clear_lsb, int data_swab, 150 AddressSpace *as, bool load_rom); 151 152 /** load_elf_as: 153 * Same as load_elf_ram(), but always loads the elf as ROM 154 */ 155 int load_elf_as(const char *filename, 156 uint64_t (*elf_note_fn)(void *, void *, bool), 157 uint64_t (*translate_fn)(void *, uint64_t), 158 void *translate_opaque, uint64_t *pentry, uint64_t *lowaddr, 159 uint64_t *highaddr, uint32_t *pflags, int big_endian, 160 int elf_machine, int clear_lsb, int data_swab, 161 AddressSpace *as); 162 163 /** load_elf: 164 * Same as load_elf_as(), but doesn't allow the caller to specify an 165 * AddressSpace. 166 */ 167 int load_elf(const char *filename, 168 uint64_t (*elf_note_fn)(void *, void *, bool), 169 uint64_t (*translate_fn)(void *, uint64_t), 170 void *translate_opaque, uint64_t *pentry, uint64_t *lowaddr, 171 uint64_t *highaddr, uint32_t *pflags, int big_endian, 172 int elf_machine, int clear_lsb, int data_swab); 173 174 /** load_elf_hdr: 175 * @filename: Path of ELF file 176 * @hdr: Buffer to populate with header data. Header data will not be 177 * filled if set to NULL. 178 * @is64: Set to true if the ELF is 64bit. Ignored if set to NULL 179 * @errp: Populated with an error in failure cases 180 * 181 * Inspect an ELF file's header. Read its full header contents into a 182 * buffer and/or determine if the ELF is 64bit. 183 */ 184 void load_elf_hdr(const char *filename, void *hdr, bool *is64, Error **errp); 185 186 int load_aout(const char *filename, hwaddr addr, int max_sz, 187 int bswap_needed, hwaddr target_page_size); 188 189 #define LOAD_UIMAGE_LOADADDR_INVALID (-1) 190 191 /** load_uimage_as: 192 * @filename: Path of uimage file 193 * @ep: Populated with program entry point. Ignored if NULL. 194 * @loadaddr: load address if none specified in the image or when loading a 195 * ramdisk. Populated with the load address. Ignored if NULL or 196 * LOAD_UIMAGE_LOADADDR_INVALID (images which do not specify a load 197 * address will not be loadable). 198 * @is_linux: Is set to true if the image loaded is Linux. Ignored if NULL. 199 * @translate_fn: optional function to translate load addresses 200 * @translate_opaque: opaque data passed to @translate_fn 201 * @as: The AddressSpace to load the ELF to. The value of address_space_memory 202 * is used if nothing is supplied here. 203 * 204 * Loads a u-boot image into memory. 205 * 206 * Returns the size of the loaded image on success, -1 otherwise. 207 */ 208 int load_uimage_as(const char *filename, hwaddr *ep, 209 hwaddr *loadaddr, int *is_linux, 210 uint64_t (*translate_fn)(void *, uint64_t), 211 void *translate_opaque, AddressSpace *as); 212 213 /** load_uimage: 214 * Same as load_uimage_as(), but doesn't allow the caller to specify an 215 * AddressSpace. 216 */ 217 int load_uimage(const char *filename, hwaddr *ep, 218 hwaddr *loadaddr, int *is_linux, 219 uint64_t (*translate_fn)(void *, uint64_t), 220 void *translate_opaque); 221 222 /** 223 * load_ramdisk_as: 224 * @filename: Path to the ramdisk image 225 * @addr: Memory address to load the ramdisk to 226 * @max_sz: Maximum allowed ramdisk size (for non-u-boot ramdisks) 227 * @as: The AddressSpace to load the ELF to. The value of address_space_memory 228 * is used if nothing is supplied here. 229 * 230 * Load a ramdisk image with U-Boot header to the specified memory 231 * address. 232 * 233 * Returns the size of the loaded image on success, -1 otherwise. 234 */ 235 int load_ramdisk_as(const char *filename, hwaddr addr, uint64_t max_sz, 236 AddressSpace *as); 237 238 /** 239 * load_ramdisk: 240 * Same as load_ramdisk_as(), but doesn't allow the caller to specify 241 * an AddressSpace. 242 */ 243 int load_ramdisk(const char *filename, hwaddr addr, uint64_t max_sz); 244 245 ssize_t gunzip(void *dst, size_t dstlen, uint8_t *src, size_t srclen); 246 247 ssize_t read_targphys(const char *name, 248 int fd, hwaddr dst_addr, size_t nbytes); 249 void pstrcpy_targphys(const char *name, 250 hwaddr dest, int buf_size, 251 const char *source); 252 253 extern bool option_rom_has_mr; 254 extern bool rom_file_has_mr; 255 256 int rom_add_file(const char *file, const char *fw_dir, 257 hwaddr addr, int32_t bootindex, 258 bool option_rom, MemoryRegion *mr, AddressSpace *as); 259 MemoryRegion *rom_add_blob(const char *name, const void *blob, size_t len, 260 size_t max_len, hwaddr addr, 261 const char *fw_file_name, 262 FWCfgCallback fw_callback, 263 void *callback_opaque, AddressSpace *as, 264 bool read_only); 265 int rom_add_elf_program(const char *name, GMappedFile *mapped_file, void *data, 266 size_t datasize, size_t romsize, hwaddr addr, 267 AddressSpace *as); 268 int rom_check_and_register_reset(void); 269 void rom_set_fw(FWCfgState *f); 270 void rom_set_order_override(int order); 271 void rom_reset_order_override(void); 272 273 /** 274 * rom_transaction_begin: 275 * 276 * Call this before of a series of rom_add_*() calls. Call 277 * rom_transaction_end() afterwards to commit or abort. These functions are 278 * useful for undoing a series of rom_add_*() calls if image file loading fails 279 * partway through. 280 */ 281 void rom_transaction_begin(void); 282 283 /** 284 * rom_transaction_end: 285 * @commit: true to commit added roms, false to drop added roms 286 * 287 * Call this after a series of rom_add_*() calls. See rom_transaction_begin(). 288 */ 289 void rom_transaction_end(bool commit); 290 291 int rom_copy(uint8_t *dest, hwaddr addr, size_t size); 292 void *rom_ptr(hwaddr addr, size_t size); 293 /** 294 * rom_ptr_for_as: Return a pointer to ROM blob data for the address 295 * @as: AddressSpace to look for the ROM blob in 296 * @addr: Address within @as 297 * @size: size of data required in bytes 298 * 299 * Returns: pointer into the data which backs the matching ROM blob, 300 * or NULL if no blob covers the address range. 301 * 302 * This function looks for a ROM blob which covers the specified range 303 * of bytes of length @size starting at @addr within the address space 304 * @as. This is useful for code which runs as part of board 305 * initialization or CPU reset which wants to read data that is part 306 * of a user-supplied guest image or other guest memory contents, but 307 * which runs before the ROM loader's reset function has copied the 308 * blobs into guest memory. 309 * 310 * rom_ptr_for_as() will look not just for blobs loaded directly to 311 * the specified address, but also for blobs which were loaded to an 312 * alias of the region at a different location in the AddressSpace. 313 * In other words, if a machine model has RAM at address 0x0000_0000 314 * which is aliased to also appear at 0x1000_0000, rom_ptr_for_as() 315 * will return the correct data whether the guest image was linked and 316 * loaded at 0x0000_0000 or 0x1000_0000. Contrast rom_ptr(), which 317 * will only return data if the image load address is an exact match 318 * with the queried address. 319 * 320 * New code should prefer to use rom_ptr_for_as() instead of 321 * rom_ptr(). 322 */ 323 void *rom_ptr_for_as(AddressSpace *as, hwaddr addr, size_t size); 324 void hmp_info_roms(Monitor *mon, const QDict *qdict); 325 326 #define rom_add_file_fixed(_f, _a, _i) \ 327 rom_add_file(_f, NULL, _a, _i, false, NULL, NULL) 328 #define rom_add_blob_fixed(_f, _b, _l, _a) \ 329 rom_add_blob(_f, _b, _l, _l, _a, NULL, NULL, NULL, NULL, true) 330 #define rom_add_file_mr(_f, _mr, _i) \ 331 rom_add_file(_f, NULL, 0, _i, false, _mr, NULL) 332 #define rom_add_file_as(_f, _as, _i) \ 333 rom_add_file(_f, NULL, 0, _i, false, NULL, _as) 334 #define rom_add_file_fixed_as(_f, _a, _i, _as) \ 335 rom_add_file(_f, NULL, _a, _i, false, NULL, _as) 336 #define rom_add_blob_fixed_as(_f, _b, _l, _a, _as) \ 337 rom_add_blob(_f, _b, _l, _l, _a, NULL, NULL, NULL, _as, true) 338 339 #define PC_ROM_MIN_VGA 0xc0000 340 #define PC_ROM_MIN_OPTION 0xc8000 341 #define PC_ROM_MAX 0xe0000 342 #define PC_ROM_ALIGN 0x800 343 #define PC_ROM_SIZE (PC_ROM_MAX - PC_ROM_MIN_VGA) 344 345 int rom_add_vga(const char *file); 346 int rom_add_option(const char *file, int32_t bootindex); 347 348 /* This is the usual maximum in uboot, so if a uImage overflows this, it would 349 * overflow on real hardware too. */ 350 #define UBOOT_MAX_GUNZIP_BYTES (64 << 20) 351 352 #endif 353