1 /* 2 * ARMv7M NVIC object 3 * 4 * Copyright (c) 2017 Linaro Ltd 5 * Written by Peter Maydell <peter.maydell@linaro.org> 6 * 7 * This code is licensed under the GPL version 2 or later. 8 */ 9 10 #ifndef HW_ARM_ARMV7M_NVIC_H 11 #define HW_ARM_ARMV7M_NVIC_H 12 13 #include "target/arm/cpu-qom.h" 14 #include "hw/sysbus.h" 15 #include "hw/timer/armv7m_systick.h" 16 #include "qom/object.h" 17 18 #define TYPE_NVIC "armv7m_nvic" 19 OBJECT_DECLARE_SIMPLE_TYPE(NVICState, NVIC) 20 21 /* Highest permitted number of exceptions (architectural limit) */ 22 #define NVIC_MAX_VECTORS 512 23 /* Number of internal exceptions */ 24 #define NVIC_INTERNAL_VECTORS 16 25 26 typedef struct VecInfo { 27 /* Exception priorities can range from -3 to 255; only the unmodifiable 28 * priority values for RESET, NMI and HardFault can be negative. 29 */ 30 int16_t prio; 31 uint8_t enabled; 32 uint8_t pending; 33 uint8_t active; 34 uint8_t level; /* exceptions <=15 never set level */ 35 } VecInfo; 36 37 struct NVICState { 38 /*< private >*/ 39 SysBusDevice parent_obj; 40 /*< public >*/ 41 42 ARMCPU *cpu; 43 44 VecInfo vectors[NVIC_MAX_VECTORS]; 45 /* If the v8M security extension is implemented, some of the internal 46 * exceptions are banked between security states (ie there exists both 47 * a Secure and a NonSecure version of the exception and its state): 48 * HardFault, MemManage, UsageFault, SVCall, PendSV, SysTick (R_PJHV) 49 * The rest (including all the external exceptions) are not banked, though 50 * they may be configurable to target either Secure or NonSecure state. 51 * We store the secure exception state in sec_vectors[] for the banked 52 * exceptions, and otherwise use only vectors[] (including for exceptions 53 * like SecureFault that unconditionally target Secure state). 54 * Entries in sec_vectors[] for non-banked exception numbers are unused. 55 */ 56 VecInfo sec_vectors[NVIC_INTERNAL_VECTORS]; 57 /* The PRIGROUP field in AIRCR is banked */ 58 uint32_t prigroup[M_REG_NUM_BANKS]; 59 uint8_t num_prio_bits; 60 61 /* v8M NVIC_ITNS state (stored as a bool per bit) */ 62 bool itns[NVIC_MAX_VECTORS]; 63 64 /* The following fields are all cached state that can be recalculated 65 * from the vectors[] and sec_vectors[] arrays and the prigroup field: 66 * - vectpending 67 * - vectpending_is_secure 68 * - exception_prio 69 * - vectpending_prio 70 */ 71 unsigned int vectpending; /* highest prio pending enabled exception */ 72 /* true if vectpending is a banked secure exception, ie it is in 73 * sec_vectors[] rather than vectors[] 74 */ 75 bool vectpending_is_s_banked; 76 int exception_prio; /* group prio of the highest prio active exception */ 77 int vectpending_prio; /* group prio of the exception in vectpending */ 78 79 MemoryRegion sysregmem; 80 81 uint32_t num_irq; 82 qemu_irq excpout; 83 qemu_irq sysresetreq; 84 }; 85 86 /* Interface between CPU and Interrupt controller. */ 87 /** 88 * armv7m_nvic_set_pending: mark the specified exception as pending 89 * @s: the NVIC 90 * @irq: the exception number to mark pending 91 * @secure: false for non-banked exceptions or for the nonsecure 92 * version of a banked exception, true for the secure version of a banked 93 * exception. 94 * 95 * Marks the specified exception as pending. Note that we will assert() 96 * if @secure is true and @irq does not specify one of the fixed set 97 * of architecturally banked exceptions. 98 */ 99 void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure); 100 /** 101 * armv7m_nvic_set_pending_derived: mark this derived exception as pending 102 * @s: the NVIC 103 * @irq: the exception number to mark pending 104 * @secure: false for non-banked exceptions or for the nonsecure 105 * version of a banked exception, true for the secure version of a banked 106 * exception. 107 * 108 * Similar to armv7m_nvic_set_pending(), but specifically for derived 109 * exceptions (exceptions generated in the course of trying to take 110 * a different exception). 111 */ 112 void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure); 113 /** 114 * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending 115 * @s: the NVIC 116 * @irq: the exception number to mark pending 117 * @secure: false for non-banked exceptions or for the nonsecure 118 * version of a banked exception, true for the secure version of a banked 119 * exception. 120 * 121 * Similar to armv7m_nvic_set_pending(), but specifically for exceptions 122 * generated in the course of lazy stacking of FP registers. 123 */ 124 void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure); 125 /** 126 * armv7m_nvic_get_pending_irq_info: return highest priority pending 127 * exception, and whether it targets Secure state 128 * @s: the NVIC 129 * @pirq: set to pending exception number 130 * @ptargets_secure: set to whether pending exception targets Secure 131 * 132 * This function writes the number of the highest priority pending 133 * exception (the one which would be made active by 134 * armv7m_nvic_acknowledge_irq()) to @pirq, and sets @ptargets_secure 135 * to true if the current highest priority pending exception should 136 * be taken to Secure state, false for NS. 137 */ 138 void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, 139 bool *ptargets_secure); 140 /** 141 * armv7m_nvic_acknowledge_irq: make highest priority pending exception active 142 * @s: the NVIC 143 * 144 * Move the current highest priority pending exception from the pending 145 * state to the active state, and update v7m.exception to indicate that 146 * it is the exception currently being handled. 147 */ 148 void armv7m_nvic_acknowledge_irq(NVICState *s); 149 /** 150 * armv7m_nvic_complete_irq: complete specified interrupt or exception 151 * @s: the NVIC 152 * @irq: the exception number to complete 153 * @secure: true if this exception was secure 154 * 155 * Returns: -1 if the irq was not active 156 * 1 if completing this irq brought us back to base (no active irqs) 157 * 0 if there is still an irq active after this one was completed 158 * (Ignoring -1, this is the same as the RETTOBASE value before completion.) 159 */ 160 int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure); 161 /** 162 * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) 163 * @s: the NVIC 164 * @irq: the exception number to mark pending 165 * @secure: false for non-banked exceptions or for the nonsecure 166 * version of a banked exception, true for the secure version of a banked 167 * exception. 168 * 169 * Return whether an exception is "ready", i.e. whether the exception is 170 * enabled and is configured at a priority which would allow it to 171 * interrupt the current execution priority. This controls whether the 172 * RDY bit for it in the FPCCR is set. 173 */ 174 bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure); 175 /** 176 * armv7m_nvic_raw_execution_priority: return the raw execution priority 177 * @s: the NVIC 178 * 179 * Returns: the raw execution priority as defined by the v8M architecture. 180 * This is the execution priority minus the effects of AIRCR.PRIS, 181 * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting. 182 * (v8M ARM ARM I_PKLD.) 183 */ 184 int armv7m_nvic_raw_execution_priority(NVICState *s); 185 /** 186 * armv7m_nvic_neg_prio_requested: return true if the requested execution 187 * priority is negative for the specified security state. 188 * @s: the NVIC 189 * @secure: the security state to test 190 * This corresponds to the pseudocode IsReqExecPriNeg(). 191 */ 192 #ifndef CONFIG_USER_ONLY 193 bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure); 194 #else 195 static inline bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) 196 { 197 return false; 198 } 199 #endif 200 #ifndef CONFIG_USER_ONLY 201 bool armv7m_nvic_can_take_pending_exception(NVICState *s); 202 #else 203 static inline bool armv7m_nvic_can_take_pending_exception(NVICState *s) 204 { 205 return true; 206 } 207 #endif 208 209 #endif 210