1 /* 2 * ARM GIC support 3 * 4 * Copyright (c) 2012 Linaro Limited 5 * Copyright (c) 2015 Huawei. 6 * Copyright (c) 2015 Samsung Electronics Co., Ltd. 7 * Written by Peter Maydell 8 * Reworked for GICv3 by Shlomo Pongratz and Pavel Fedin 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License as published by 12 * the Free Software Foundation, either version 2 of the License, or 13 * (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License along 21 * with this program; if not, see <http://www.gnu.org/licenses/>. 22 */ 23 24 #ifndef HW_ARM_GICV3_COMMON_H 25 #define HW_ARM_GICV3_COMMON_H 26 27 #include "hw/sysbus.h" 28 #include "hw/intc/arm_gic_common.h" 29 30 /* 31 * Maximum number of possible interrupts, determined by the GIC architecture. 32 * Note that this does not include LPIs. When implemented, these should be 33 * dealt with separately. 34 */ 35 #define GICV3_MAXIRQ 1020 36 #define GICV3_MAXSPI (GICV3_MAXIRQ - GIC_INTERNAL) 37 38 #define GICV3_REDIST_SIZE 0x20000 39 40 /* Number of SGI target-list bits */ 41 #define GICV3_TARGETLIST_BITS 16 42 43 /* Maximum number of list registers (architectural limit) */ 44 #define GICV3_LR_MAX 16 45 46 /* Minimum BPR for Secure, or when security not enabled */ 47 #define GIC_MIN_BPR 0 48 /* Minimum BPR for Nonsecure when security is enabled */ 49 #define GIC_MIN_BPR_NS (GIC_MIN_BPR + 1) 50 51 /* For some distributor fields we want to model the array of 32-bit 52 * register values which hold various bitmaps corresponding to enabled, 53 * pending, etc bits. These macros and functions facilitate that; the 54 * APIs are generally modelled on the generic bitmap.h functions 55 * (which are unsuitable here because they use 'unsigned long' as the 56 * underlying storage type, which is very awkward when you need to 57 * access the data as 32-bit values.) 58 * Each bitmap contains a bit for each interrupt. Although there is 59 * space for the PPIs and SGIs, those bits (the first 32) are never 60 * used as that state lives in the redistributor. The unused bits are 61 * provided purely so that interrupt X's state is always in bit X; this 62 * avoids bugs where we forget to subtract GIC_INTERNAL from an 63 * interrupt number. 64 */ 65 #define GICV3_BMP_SIZE DIV_ROUND_UP(GICV3_MAXIRQ, 32) 66 67 #define GIC_DECLARE_BITMAP(name) \ 68 uint32_t name[GICV3_BMP_SIZE] 69 70 #define GIC_BIT_MASK(nr) (1U << ((nr) % 32)) 71 #define GIC_BIT_WORD(nr) ((nr) / 32) 72 73 static inline void gic_bmp_set_bit(int nr, uint32_t *addr) 74 { 75 uint32_t mask = GIC_BIT_MASK(nr); 76 uint32_t *p = addr + GIC_BIT_WORD(nr); 77 78 *p |= mask; 79 } 80 81 static inline void gic_bmp_clear_bit(int nr, uint32_t *addr) 82 { 83 uint32_t mask = GIC_BIT_MASK(nr); 84 uint32_t *p = addr + GIC_BIT_WORD(nr); 85 86 *p &= ~mask; 87 } 88 89 static inline int gic_bmp_test_bit(int nr, const uint32_t *addr) 90 { 91 return 1U & (addr[GIC_BIT_WORD(nr)] >> (nr & 31)); 92 } 93 94 static inline void gic_bmp_replace_bit(int nr, uint32_t *addr, int val) 95 { 96 uint32_t mask = GIC_BIT_MASK(nr); 97 uint32_t *p = addr + GIC_BIT_WORD(nr); 98 99 *p &= ~mask; 100 *p |= (val & 1U) << (nr % 32); 101 } 102 103 /* Return a pointer to the 32-bit word containing the specified bit. */ 104 static inline uint32_t *gic_bmp_ptr32(uint32_t *addr, int nr) 105 { 106 return addr + GIC_BIT_WORD(nr); 107 } 108 109 typedef struct GICv3State GICv3State; 110 typedef struct GICv3CPUState GICv3CPUState; 111 112 /* Some CPU interface registers come in three flavours: 113 * Group0, Group1 (Secure) and Group1 (NonSecure) 114 * (where the latter two are exposed as a single banked system register). 115 * In the state struct they are implemented as a 3-element array which 116 * can be indexed into by the GICV3_G0, GICV3_G1 and GICV3_G1NS constants. 117 * If the CPU doesn't support EL3 then the G1 element is unused. 118 * 119 * These constants are also used to communicate the group to use for 120 * an interrupt or SGI when it is passed between the cpu interface and 121 * the redistributor or distributor. For those purposes the receiving end 122 * must be prepared to cope with a Group 1 Secure interrupt even if it does 123 * not have security support enabled, because security can be disabled 124 * independently in the CPU and in the GIC. In that case the receiver should 125 * treat an incoming Group 1 Secure interrupt as if it were Group 0. 126 * (This architectural requirement is why the _G1 element is the unused one 127 * in a no-EL3 CPU: we would otherwise have to translate back and forth 128 * between (G0, G1NS) from the distributor and (G0, G1) in the CPU i/f.) 129 */ 130 #define GICV3_G0 0 131 #define GICV3_G1 1 132 #define GICV3_G1NS 2 133 134 /* ICC_CTLR_EL1, GICD_STATUSR and GICR_STATUSR are banked but not 135 * group-related, so those indices are just 0 for S and 1 for NS. 136 * (If the CPU or the GIC, respectively, don't support the Security 137 * extensions then the S element is unused.) 138 */ 139 #define GICV3_S 0 140 #define GICV3_NS 1 141 142 typedef struct { 143 int irq; 144 uint8_t prio; 145 int grp; 146 } PendingIrq; 147 148 struct GICv3CPUState { 149 GICv3State *gic; 150 CPUState *cpu; 151 qemu_irq parent_irq; 152 qemu_irq parent_fiq; 153 qemu_irq parent_virq; 154 qemu_irq parent_vfiq; 155 qemu_irq maintenance_irq; 156 157 /* Redistributor */ 158 uint32_t level; /* Current IRQ level */ 159 /* RD_base page registers */ 160 uint32_t gicr_ctlr; 161 uint64_t gicr_typer; 162 uint32_t gicr_statusr[2]; 163 uint32_t gicr_waker; 164 uint64_t gicr_propbaser; 165 uint64_t gicr_pendbaser; 166 /* SGI_base page registers */ 167 uint32_t gicr_igroupr0; 168 uint32_t gicr_ienabler0; 169 uint32_t gicr_ipendr0; 170 uint32_t gicr_iactiver0; 171 uint32_t edge_trigger; /* ICFGR0 and ICFGR1 even bits */ 172 uint32_t gicr_igrpmodr0; 173 uint32_t gicr_nsacr; 174 uint8_t gicr_ipriorityr[GIC_INTERNAL]; 175 176 /* CPU interface */ 177 uint64_t icc_sre_el1; 178 uint64_t icc_ctlr_el1[2]; 179 uint64_t icc_pmr_el1; 180 uint64_t icc_bpr[3]; 181 uint64_t icc_apr[3][4]; 182 uint64_t icc_igrpen[3]; 183 uint64_t icc_ctlr_el3; 184 185 /* Virtualization control interface */ 186 uint64_t ich_apr[3][4]; /* ich_apr[GICV3_G1][x] never used */ 187 uint64_t ich_hcr_el2; 188 uint64_t ich_lr_el2[GICV3_LR_MAX]; 189 uint64_t ich_vmcr_el2; 190 191 /* Properties of the CPU interface. These are initialized from 192 * the settings in the CPU proper. 193 * If the number of implemented list registers is 0 then the 194 * virtualization support is not implemented. 195 */ 196 int num_list_regs; 197 int vpribits; /* number of virtual priority bits */ 198 int vprebits; /* number of virtual preemption bits */ 199 200 /* Current highest priority pending interrupt for this CPU. 201 * This is cached information that can be recalculated from the 202 * real state above; it doesn't need to be migrated. 203 */ 204 PendingIrq hppi; 205 /* This is temporary working state, to avoid a malloc in gicv3_update() */ 206 bool seenbetter; 207 }; 208 209 struct GICv3State { 210 /*< private >*/ 211 SysBusDevice parent_obj; 212 /*< public >*/ 213 214 MemoryRegion iomem_dist; /* Distributor */ 215 MemoryRegion *iomem_redist; /* Redistributor Regions */ 216 uint32_t *redist_region_count; /* redistributor count within each region */ 217 uint32_t nb_redist_regions; /* number of redist regions */ 218 219 uint32_t num_cpu; 220 uint32_t num_irq; 221 uint32_t revision; 222 bool security_extn; 223 bool irq_reset_nonsecure; 224 bool gicd_no_migration_shift_bug; 225 226 int dev_fd; /* kvm device fd if backed by kvm vgic support */ 227 Error *migration_blocker; 228 229 /* Distributor */ 230 231 /* for a GIC with the security extensions the NS banked version of this 232 * register is just an alias of bit 1 of the S banked version. 233 */ 234 uint32_t gicd_ctlr; 235 uint32_t gicd_statusr[2]; 236 GIC_DECLARE_BITMAP(group); /* GICD_IGROUPR */ 237 GIC_DECLARE_BITMAP(grpmod); /* GICD_IGRPMODR */ 238 GIC_DECLARE_BITMAP(enabled); /* GICD_ISENABLER */ 239 GIC_DECLARE_BITMAP(pending); /* GICD_ISPENDR */ 240 GIC_DECLARE_BITMAP(active); /* GICD_ISACTIVER */ 241 GIC_DECLARE_BITMAP(level); /* Current level */ 242 GIC_DECLARE_BITMAP(edge_trigger); /* GICD_ICFGR even bits */ 243 uint8_t gicd_ipriority[GICV3_MAXIRQ]; 244 uint64_t gicd_irouter[GICV3_MAXIRQ]; 245 /* Cached information: pointer to the cpu i/f for the CPUs specified 246 * in the IROUTER registers 247 */ 248 GICv3CPUState *gicd_irouter_target[GICV3_MAXIRQ]; 249 uint32_t gicd_nsacr[DIV_ROUND_UP(GICV3_MAXIRQ, 16)]; 250 251 GICv3CPUState *cpu; 252 }; 253 254 #define GICV3_BITMAP_ACCESSORS(BMP) \ 255 static inline void gicv3_gicd_##BMP##_set(GICv3State *s, int irq) \ 256 { \ 257 gic_bmp_set_bit(irq, s->BMP); \ 258 } \ 259 static inline int gicv3_gicd_##BMP##_test(GICv3State *s, int irq) \ 260 { \ 261 return gic_bmp_test_bit(irq, s->BMP); \ 262 } \ 263 static inline void gicv3_gicd_##BMP##_clear(GICv3State *s, int irq) \ 264 { \ 265 gic_bmp_clear_bit(irq, s->BMP); \ 266 } \ 267 static inline void gicv3_gicd_##BMP##_replace(GICv3State *s, \ 268 int irq, int value) \ 269 { \ 270 gic_bmp_replace_bit(irq, s->BMP, value); \ 271 } 272 273 GICV3_BITMAP_ACCESSORS(group) 274 GICV3_BITMAP_ACCESSORS(grpmod) 275 GICV3_BITMAP_ACCESSORS(enabled) 276 GICV3_BITMAP_ACCESSORS(pending) 277 GICV3_BITMAP_ACCESSORS(active) 278 GICV3_BITMAP_ACCESSORS(level) 279 GICV3_BITMAP_ACCESSORS(edge_trigger) 280 281 #define TYPE_ARM_GICV3_COMMON "arm-gicv3-common" 282 #define ARM_GICV3_COMMON(obj) \ 283 OBJECT_CHECK(GICv3State, (obj), TYPE_ARM_GICV3_COMMON) 284 #define ARM_GICV3_COMMON_CLASS(klass) \ 285 OBJECT_CLASS_CHECK(ARMGICv3CommonClass, (klass), TYPE_ARM_GICV3_COMMON) 286 #define ARM_GICV3_COMMON_GET_CLASS(obj) \ 287 OBJECT_GET_CLASS(ARMGICv3CommonClass, (obj), TYPE_ARM_GICV3_COMMON) 288 289 typedef struct ARMGICv3CommonClass { 290 /*< private >*/ 291 SysBusDeviceClass parent_class; 292 /*< public >*/ 293 294 void (*pre_save)(GICv3State *s); 295 void (*post_load)(GICv3State *s); 296 } ARMGICv3CommonClass; 297 298 void gicv3_init_irqs_and_mmio(GICv3State *s, qemu_irq_handler handler, 299 const MemoryRegionOps *ops, Error **errp); 300 301 #endif 302