1 /* 2 * ARM GIC support 3 * 4 * Copyright (c) 2012 Linaro Limited 5 * Copyright (c) 2015 Huawei. 6 * Copyright (c) 2015 Samsung Electronics Co., Ltd. 7 * Written by Peter Maydell 8 * Reworked for GICv3 by Shlomo Pongratz and Pavel Fedin 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License as published by 12 * the Free Software Foundation, either version 2 of the License, or 13 * (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License along 21 * with this program; if not, see <http://www.gnu.org/licenses/>. 22 */ 23 24 #ifndef HW_ARM_GICV3_COMMON_H 25 #define HW_ARM_GICV3_COMMON_H 26 27 #include "hw/sysbus.h" 28 #include "hw/intc/arm_gic_common.h" 29 30 /* 31 * Maximum number of possible interrupts, determined by the GIC architecture. 32 * Note that this does not include LPIs. When implemented, these should be 33 * dealt with separately. 34 */ 35 #define GICV3_MAXIRQ 1020 36 #define GICV3_MAXSPI (GICV3_MAXIRQ - GIC_INTERNAL) 37 38 /* Minimum BPR for Secure, or when security not enabled */ 39 #define GIC_MIN_BPR 0 40 /* Minimum BPR for Nonsecure when security is enabled */ 41 #define GIC_MIN_BPR_NS (GIC_MIN_BPR + 1) 42 43 /* For some distributor fields we want to model the array of 32-bit 44 * register values which hold various bitmaps corresponding to enabled, 45 * pending, etc bits. These macros and functions facilitate that; the 46 * APIs are generally modelled on the generic bitmap.h functions 47 * (which are unsuitable here because they use 'unsigned long' as the 48 * underlying storage type, which is very awkward when you need to 49 * access the data as 32-bit values.) 50 * Each bitmap contains a bit for each interrupt. Although there is 51 * space for the PPIs and SGIs, those bits (the first 32) are never 52 * used as that state lives in the redistributor. The unused bits are 53 * provided purely so that interrupt X's state is always in bit X; this 54 * avoids bugs where we forget to subtract GIC_INTERNAL from an 55 * interrupt number. 56 */ 57 #define GICV3_BMP_SIZE (DIV_ROUND_UP(GICV3_MAXIRQ, 32)) 58 59 #define GIC_DECLARE_BITMAP(name) \ 60 uint32_t name[GICV3_BMP_SIZE] 61 62 #define GIC_BIT_MASK(nr) (1U << ((nr) % 32)) 63 #define GIC_BIT_WORD(nr) ((nr) / 32) 64 65 static inline void gic_bmp_set_bit(int nr, uint32_t *addr) 66 { 67 uint32_t mask = GIC_BIT_MASK(nr); 68 uint32_t *p = addr + GIC_BIT_WORD(nr); 69 70 *p |= mask; 71 } 72 73 static inline void gic_bmp_clear_bit(int nr, uint32_t *addr) 74 { 75 uint32_t mask = GIC_BIT_MASK(nr); 76 uint32_t *p = addr + GIC_BIT_WORD(nr); 77 78 *p &= ~mask; 79 } 80 81 static inline int gic_bmp_test_bit(int nr, const uint32_t *addr) 82 { 83 return 1U & (addr[GIC_BIT_WORD(nr)] >> (nr & 31)); 84 } 85 86 static inline void gic_bmp_replace_bit(int nr, uint32_t *addr, int val) 87 { 88 uint32_t mask = GIC_BIT_MASK(nr); 89 uint32_t *p = addr + GIC_BIT_WORD(nr); 90 91 *p &= ~mask; 92 *p |= (val & 1U) << (nr % 32); 93 } 94 95 /* Return a pointer to the 32-bit word containing the specified bit. */ 96 static inline uint32_t *gic_bmp_ptr32(uint32_t *addr, int nr) 97 { 98 return addr + GIC_BIT_WORD(nr); 99 } 100 101 typedef struct GICv3State GICv3State; 102 typedef struct GICv3CPUState GICv3CPUState; 103 104 /* Some CPU interface registers come in three flavours: 105 * Group0, Group1 (Secure) and Group1 (NonSecure) 106 * (where the latter two are exposed as a single banked system register). 107 * In the state struct they are implemented as a 3-element array which 108 * can be indexed into by the GICV3_G0, GICV3_G1 and GICV3_G1NS constants. 109 * If the CPU doesn't support EL3 then the G1 element is unused. 110 * 111 * These constants are also used to communicate the group to use for 112 * an interrupt or SGI when it is passed between the cpu interface and 113 * the redistributor or distributor. For those purposes the receiving end 114 * must be prepared to cope with a Group 1 Secure interrupt even if it does 115 * not have security support enabled, because security can be disabled 116 * independently in the CPU and in the GIC. In that case the receiver should 117 * treat an incoming Group 1 Secure interrupt as if it were Group 0. 118 * (This architectural requirement is why the _G1 element is the unused one 119 * in a no-EL3 CPU: we would otherwise have to translate back and forth 120 * between (G0, G1NS) from the distributor and (G0, G1) in the CPU i/f.) 121 */ 122 #define GICV3_G0 0 123 #define GICV3_G1 1 124 #define GICV3_G1NS 2 125 126 /* ICC_CTLR_EL1, GICD_STATUSR and GICR_STATUSR are banked but not 127 * group-related, so those indices are just 0 for S and 1 for NS. 128 * (If the CPU or the GIC, respectively, don't support the Security 129 * extensions then the S element is unused.) 130 */ 131 #define GICV3_S 0 132 #define GICV3_NS 1 133 134 struct GICv3CPUState { 135 GICv3State *gic; 136 CPUState *cpu; 137 138 /* Redistributor */ 139 uint32_t level; /* Current IRQ level */ 140 /* RD_base page registers */ 141 uint32_t gicr_ctlr; 142 uint64_t gicr_typer; 143 uint32_t gicr_statusr[2]; 144 uint32_t gicr_waker; 145 uint64_t gicr_propbaser; 146 uint64_t gicr_pendbaser; 147 /* SGI_base page registers */ 148 uint32_t gicr_igroupr0; 149 uint32_t gicr_ienabler0; 150 uint32_t gicr_ipendr0; 151 uint32_t gicr_iactiver0; 152 uint32_t edge_trigger; /* ICFGR0 and ICFGR1 even bits */ 153 uint32_t gicr_igrpmodr0; 154 uint32_t gicr_nsacr; 155 uint8_t gicr_ipriorityr[GIC_INTERNAL]; 156 157 /* CPU interface */ 158 uint64_t icc_ctlr_el1[2]; 159 uint64_t icc_pmr_el1; 160 uint64_t icc_bpr[3]; 161 uint64_t icc_apr[3][4]; 162 uint64_t icc_igrpen[3]; 163 uint64_t icc_ctlr_el3; 164 }; 165 166 struct GICv3State { 167 /*< private >*/ 168 SysBusDevice parent_obj; 169 /*< public >*/ 170 171 qemu_irq *parent_irq; 172 qemu_irq *parent_fiq; 173 174 MemoryRegion iomem_dist; /* Distributor */ 175 MemoryRegion iomem_redist; /* Redistributors */ 176 177 uint32_t num_cpu; 178 uint32_t num_irq; 179 uint32_t revision; 180 bool security_extn; 181 bool irq_reset_nonsecure; 182 183 int dev_fd; /* kvm device fd if backed by kvm vgic support */ 184 Error *migration_blocker; 185 186 /* Distributor */ 187 188 /* for a GIC with the security extensions the NS banked version of this 189 * register is just an alias of bit 1 of the S banked version. 190 */ 191 uint32_t gicd_ctlr; 192 uint32_t gicd_statusr[2]; 193 GIC_DECLARE_BITMAP(group); /* GICD_IGROUPR */ 194 GIC_DECLARE_BITMAP(grpmod); /* GICD_IGRPMODR */ 195 GIC_DECLARE_BITMAP(enabled); /* GICD_ISENABLER */ 196 GIC_DECLARE_BITMAP(pending); /* GICD_ISPENDR */ 197 GIC_DECLARE_BITMAP(active); /* GICD_ISACTIVER */ 198 GIC_DECLARE_BITMAP(level); /* Current level */ 199 GIC_DECLARE_BITMAP(edge_trigger); /* GICD_ICFGR even bits */ 200 uint8_t gicd_ipriority[GICV3_MAXIRQ]; 201 uint64_t gicd_irouter[GICV3_MAXIRQ]; 202 uint32_t gicd_nsacr[DIV_ROUND_UP(GICV3_MAXIRQ, 16)]; 203 204 GICv3CPUState *cpu; 205 }; 206 207 #define GICV3_BITMAP_ACCESSORS(BMP) \ 208 static inline void gicv3_gicd_##BMP##_set(GICv3State *s, int irq) \ 209 { \ 210 gic_bmp_set_bit(irq, s->BMP); \ 211 } \ 212 static inline int gicv3_gicd_##BMP##_test(GICv3State *s, int irq) \ 213 { \ 214 return gic_bmp_test_bit(irq, s->BMP); \ 215 } \ 216 static inline void gicv3_gicd_##BMP##_clear(GICv3State *s, int irq) \ 217 { \ 218 gic_bmp_clear_bit(irq, s->BMP); \ 219 } \ 220 static inline void gicv3_gicd_##BMP##_replace(GICv3State *s, \ 221 int irq, int value) \ 222 { \ 223 gic_bmp_replace_bit(irq, s->BMP, value); \ 224 } 225 226 GICV3_BITMAP_ACCESSORS(group) 227 GICV3_BITMAP_ACCESSORS(grpmod) 228 GICV3_BITMAP_ACCESSORS(enabled) 229 GICV3_BITMAP_ACCESSORS(pending) 230 GICV3_BITMAP_ACCESSORS(active) 231 GICV3_BITMAP_ACCESSORS(level) 232 GICV3_BITMAP_ACCESSORS(edge_trigger) 233 234 #define TYPE_ARM_GICV3_COMMON "arm-gicv3-common" 235 #define ARM_GICV3_COMMON(obj) \ 236 OBJECT_CHECK(GICv3State, (obj), TYPE_ARM_GICV3_COMMON) 237 #define ARM_GICV3_COMMON_CLASS(klass) \ 238 OBJECT_CLASS_CHECK(ARMGICv3CommonClass, (klass), TYPE_ARM_GICV3_COMMON) 239 #define ARM_GICV3_COMMON_GET_CLASS(obj) \ 240 OBJECT_GET_CLASS(ARMGICv3CommonClass, (obj), TYPE_ARM_GICV3_COMMON) 241 242 typedef struct ARMGICv3CommonClass { 243 /*< private >*/ 244 SysBusDeviceClass parent_class; 245 /*< public >*/ 246 247 void (*pre_save)(GICv3State *s); 248 void (*post_load)(GICv3State *s); 249 } ARMGICv3CommonClass; 250 251 void gicv3_init_irqs_and_mmio(GICv3State *s, qemu_irq_handler handler, 252 const MemoryRegionOps *ops); 253 254 #endif 255