1 #ifndef QEMU_I2C_H 2 #define QEMU_I2C_H 3 4 #include "hw/qdev.h" 5 6 /* The QEMU I2C implementation only supports simple transfers that complete 7 immediately. It does not support slave devices that need to be able to 8 defer their response (eg. CPU slave interfaces where the data is supplied 9 by the device driver in response to an interrupt). */ 10 11 enum i2c_event { 12 I2C_START_RECV, 13 I2C_START_SEND, 14 I2C_FINISH, 15 I2C_NACK /* Masker NACKed a receive byte. */ 16 }; 17 18 typedef struct I2CSlave I2CSlave; 19 20 #define TYPE_I2C_SLAVE "i2c-slave" 21 #define I2C_SLAVE(obj) \ 22 OBJECT_CHECK(I2CSlave, (obj), TYPE_I2C_SLAVE) 23 #define I2C_SLAVE_CLASS(klass) \ 24 OBJECT_CLASS_CHECK(I2CSlaveClass, (klass), TYPE_I2C_SLAVE) 25 #define I2C_SLAVE_GET_CLASS(obj) \ 26 OBJECT_GET_CLASS(I2CSlaveClass, (obj), TYPE_I2C_SLAVE) 27 28 typedef struct I2CSlaveClass { 29 DeviceClass parent_class; 30 31 /* Master to slave. Returns non-zero for a NAK, 0 for success. */ 32 int (*send)(I2CSlave *s, uint8_t data); 33 34 /* 35 * Slave to master. This cannot fail, the device should always 36 * return something here. Negative values probably result in 0xff 37 * and a possible log from the driver, and shouldn't be used. 38 */ 39 int (*recv)(I2CSlave *s); 40 41 /* 42 * Notify the slave of a bus state change. For start event, 43 * returns non-zero to NAK an operation. For other events the 44 * return code is not used and should be zero. 45 */ 46 int (*event)(I2CSlave *s, enum i2c_event event); 47 } I2CSlaveClass; 48 49 struct I2CSlave { 50 DeviceState qdev; 51 52 /* Remaining fields for internal use by the I2C code. */ 53 uint8_t address; 54 }; 55 56 #define TYPE_I2C_BUS "i2c-bus" 57 #define I2C_BUS(obj) OBJECT_CHECK(I2CBus, (obj), TYPE_I2C_BUS) 58 59 typedef struct I2CNode I2CNode; 60 61 struct I2CNode { 62 I2CSlave *elt; 63 QLIST_ENTRY(I2CNode) next; 64 }; 65 66 struct I2CBus { 67 BusState qbus; 68 QLIST_HEAD(, I2CNode) current_devs; 69 uint8_t saved_address; 70 bool broadcast; 71 }; 72 73 I2CBus *i2c_init_bus(DeviceState *parent, const char *name); 74 void i2c_set_slave_address(I2CSlave *dev, uint8_t address); 75 int i2c_bus_busy(I2CBus *bus); 76 int i2c_start_transfer(I2CBus *bus, uint8_t address, int recv); 77 void i2c_end_transfer(I2CBus *bus); 78 void i2c_nack(I2CBus *bus); 79 int i2c_send_recv(I2CBus *bus, uint8_t *data, bool send); 80 int i2c_send(I2CBus *bus, uint8_t data); 81 int i2c_recv(I2CBus *bus); 82 83 DeviceState *i2c_create_slave(I2CBus *bus, const char *name, uint8_t addr); 84 85 /* lm832x.c */ 86 void lm832x_key_event(DeviceState *dev, int key, int state); 87 88 extern const VMStateDescription vmstate_i2c_slave; 89 90 #define VMSTATE_I2C_SLAVE(_field, _state) { \ 91 .name = (stringify(_field)), \ 92 .size = sizeof(I2CSlave), \ 93 .vmsd = &vmstate_i2c_slave, \ 94 .flags = VMS_STRUCT, \ 95 .offset = vmstate_offset_value(_state, _field, I2CSlave), \ 96 } 97 98 #endif 99