1 #ifndef GDBSTUB_H 2 #define GDBSTUB_H 3 4 #define DEFAULT_GDBSTUB_PORT "1234" 5 6 /* GDB breakpoint/watchpoint types */ 7 #define GDB_BREAKPOINT_SW 0 8 #define GDB_BREAKPOINT_HW 1 9 #define GDB_WATCHPOINT_WRITE 2 10 #define GDB_WATCHPOINT_READ 3 11 #define GDB_WATCHPOINT_ACCESS 4 12 13 #ifdef NEED_CPU_H 14 #include "cpu.h" 15 16 typedef void (*gdb_syscall_complete_cb)(CPUState *cpu, 17 target_ulong ret, target_ulong err); 18 19 /** 20 * gdb_do_syscall: 21 * @cb: function to call when the system call has completed 22 * @fmt: gdb syscall format string 23 * ...: list of arguments to interpolate into @fmt 24 * 25 * Send a GDB syscall request. This function will return immediately; 26 * the callback function will be called later when the remote system 27 * call has completed. 28 * 29 * @fmt should be in the 'call-id,parameter,parameter...' format documented 30 * for the F request packet in the GDB remote protocol. A limited set of 31 * printf-style format specifiers is supported: 32 * %x - target_ulong argument printed in hex 33 * %lx - 64-bit argument printed in hex 34 * %s - string pointer (target_ulong) and length (int) pair 35 */ 36 void gdb_do_syscall(gdb_syscall_complete_cb cb, const char *fmt, ...); 37 /** 38 * gdb_do_syscallv: 39 * @cb: function to call when the system call has completed 40 * @fmt: gdb syscall format string 41 * @va: arguments to interpolate into @fmt 42 * 43 * As gdb_do_syscall, but taking a va_list rather than a variable 44 * argument list. 45 */ 46 void gdb_do_syscallv(gdb_syscall_complete_cb cb, const char *fmt, va_list va); 47 int use_gdb_syscalls(void); 48 void gdb_set_stop_cpu(CPUState *cpu); 49 50 /** 51 * gdb_exit: exit gdb session, reporting inferior status 52 * @code: exit code reported 53 * 54 * This closes the session and sends a final packet to GDB reporting 55 * the exit status of the program. It also cleans up any connections 56 * detritus before returning. 57 */ 58 void gdb_exit(int code); 59 60 #ifdef CONFIG_USER_ONLY 61 /** 62 * gdb_handlesig: yield control to gdb 63 * @cpu: CPU 64 * @sig: if non-zero, the signal number which caused us to stop 65 * 66 * This function yields control to gdb, when a user-mode-only target 67 * needs to stop execution. If @sig is non-zero, then we will send a 68 * stop packet to tell gdb that we have stopped because of this signal. 69 * 70 * This function will block (handling protocol requests from gdb) 71 * until gdb tells us to continue target execution. When it does 72 * return, the return value is a signal to deliver to the target, 73 * or 0 if no signal should be delivered, ie the signal that caused 74 * us to stop should be ignored. 75 */ 76 int gdb_handlesig(CPUState *, int); 77 void gdb_signalled(CPUArchState *, int); 78 void gdbserver_fork(CPUState *); 79 #endif 80 /* Get or set a register. Returns the size of the register. */ 81 typedef int (*gdb_get_reg_cb)(CPUArchState *env, GByteArray *buf, int reg); 82 typedef int (*gdb_set_reg_cb)(CPUArchState *env, uint8_t *buf, int reg); 83 void gdb_register_coprocessor(CPUState *cpu, 84 gdb_get_reg_cb get_reg, gdb_set_reg_cb set_reg, 85 int num_regs, const char *xml, int g_pos); 86 87 /* 88 * The GDB remote protocol transfers values in target byte order. As 89 * the gdbstub may be batching up several register values we always 90 * append to the array. 91 */ 92 93 static inline int gdb_get_reg8(GByteArray *buf, uint8_t val) 94 { 95 g_byte_array_append(buf, &val, 1); 96 return 1; 97 } 98 99 static inline int gdb_get_reg16(GByteArray *buf, uint16_t val) 100 { 101 uint16_t to_word = tswap16(val); 102 g_byte_array_append(buf, (uint8_t *) &to_word, 2); 103 return 2; 104 } 105 106 static inline int gdb_get_reg32(GByteArray *buf, uint32_t val) 107 { 108 uint32_t to_long = tswap32(val); 109 g_byte_array_append(buf, (uint8_t *) &to_long, 4); 110 return 4; 111 } 112 113 static inline int gdb_get_reg64(GByteArray *buf, uint64_t val) 114 { 115 uint64_t to_quad = tswap64(val); 116 g_byte_array_append(buf, (uint8_t *) &to_quad, 8); 117 return 8; 118 } 119 120 static inline int gdb_get_reg128(GByteArray *buf, uint64_t val_hi, 121 uint64_t val_lo) 122 { 123 uint64_t to_quad; 124 #ifdef TARGET_WORDS_BIGENDIAN 125 to_quad = tswap64(val_hi); 126 g_byte_array_append(buf, (uint8_t *) &to_quad, 8); 127 to_quad = tswap64(val_lo); 128 g_byte_array_append(buf, (uint8_t *) &to_quad, 8); 129 #else 130 to_quad = tswap64(val_lo); 131 g_byte_array_append(buf, (uint8_t *) &to_quad, 8); 132 to_quad = tswap64(val_hi); 133 g_byte_array_append(buf, (uint8_t *) &to_quad, 8); 134 #endif 135 return 16; 136 } 137 138 static inline int gdb_get_float32(GByteArray *array, float32 val) 139 { 140 uint8_t buf[sizeof(CPU_FloatU)]; 141 142 stfl_p(buf, val); 143 g_byte_array_append(array, buf, sizeof(buf)); 144 145 return sizeof(buf); 146 } 147 148 static inline int gdb_get_float64(GByteArray *array, float64 val) 149 { 150 uint8_t buf[sizeof(CPU_DoubleU)]; 151 152 stfq_p(buf, val); 153 g_byte_array_append(array, buf, sizeof(buf)); 154 155 return sizeof(buf); 156 } 157 158 static inline int gdb_get_zeroes(GByteArray *array, size_t len) 159 { 160 guint oldlen = array->len; 161 g_byte_array_set_size(array, oldlen + len); 162 memset(array->data + oldlen, 0, len); 163 164 return len; 165 } 166 167 /** 168 * gdb_get_reg_ptr: get pointer to start of last element 169 * @len: length of element 170 * 171 * This is a helper function to extract the pointer to the last 172 * element for additional processing. Some front-ends do additional 173 * dynamic swapping of the elements based on CPU state. 174 */ 175 static inline uint8_t * gdb_get_reg_ptr(GByteArray *buf, int len) 176 { 177 return buf->data + buf->len - len; 178 } 179 180 #if TARGET_LONG_BITS == 64 181 #define gdb_get_regl(buf, val) gdb_get_reg64(buf, val) 182 #define ldtul_p(addr) ldq_p(addr) 183 #else 184 #define gdb_get_regl(buf, val) gdb_get_reg32(buf, val) 185 #define ldtul_p(addr) ldl_p(addr) 186 #endif 187 188 #endif 189 190 /** 191 * gdbserver_start: start the gdb server 192 * @port_or_device: connection spec for gdb 193 * 194 * For CONFIG_USER this is either a tcp port or a path to a fifo. For 195 * system emulation you can use a full chardev spec for your gdbserver 196 * port. 197 */ 198 int gdbserver_start(const char *port_or_device); 199 200 /** 201 * gdb_has_xml: 202 * This is an ugly hack to cope with both new and old gdb. 203 * If gdb sends qXfer:features:read then assume we're talking to a newish 204 * gdb that understands target descriptions. 205 */ 206 extern bool gdb_has_xml; 207 208 /* in gdbstub-xml.c, generated by scripts/feature_to_c.sh */ 209 extern const char *const xml_builtin[][2]; 210 211 #endif 212