xref: /openbmc/qemu/include/exec/cpu-all.h (revision acb0ef58)
1 /*
2  * defines common to all virtual CPUs
3  *
4  *  Copyright (c) 2003 Fabrice Bellard
5  *
6  * This library is free software; you can redistribute it and/or
7  * modify it under the terms of the GNU Lesser General Public
8  * License as published by the Free Software Foundation; either
9  * version 2 of the License, or (at your option) any later version.
10  *
11  * This library is distributed in the hope that it will be useful,
12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
14  * Lesser General Public License for more details.
15  *
16  * You should have received a copy of the GNU Lesser General Public
17  * License along with this library; if not, see <http://www.gnu.org/licenses/>.
18  */
19 #ifndef CPU_ALL_H
20 #define CPU_ALL_H
21 
22 #include "qemu-common.h"
23 #include "exec/cpu-common.h"
24 #include "exec/memory.h"
25 #include "qemu/thread.h"
26 #include "qom/cpu.h"
27 
28 /* some important defines:
29  *
30  * WORDS_ALIGNED : if defined, the host cpu can only make word aligned
31  * memory accesses.
32  *
33  * HOST_WORDS_BIGENDIAN : if defined, the host cpu is big endian and
34  * otherwise little endian.
35  *
36  * (TARGET_WORDS_ALIGNED : same for target cpu (not supported yet))
37  *
38  * TARGET_WORDS_BIGENDIAN : same for target cpu
39  */
40 
41 #if defined(HOST_WORDS_BIGENDIAN) != defined(TARGET_WORDS_BIGENDIAN)
42 #define BSWAP_NEEDED
43 #endif
44 
45 #ifdef BSWAP_NEEDED
46 
47 static inline uint16_t tswap16(uint16_t s)
48 {
49     return bswap16(s);
50 }
51 
52 static inline uint32_t tswap32(uint32_t s)
53 {
54     return bswap32(s);
55 }
56 
57 static inline uint64_t tswap64(uint64_t s)
58 {
59     return bswap64(s);
60 }
61 
62 static inline void tswap16s(uint16_t *s)
63 {
64     *s = bswap16(*s);
65 }
66 
67 static inline void tswap32s(uint32_t *s)
68 {
69     *s = bswap32(*s);
70 }
71 
72 static inline void tswap64s(uint64_t *s)
73 {
74     *s = bswap64(*s);
75 }
76 
77 #else
78 
79 static inline uint16_t tswap16(uint16_t s)
80 {
81     return s;
82 }
83 
84 static inline uint32_t tswap32(uint32_t s)
85 {
86     return s;
87 }
88 
89 static inline uint64_t tswap64(uint64_t s)
90 {
91     return s;
92 }
93 
94 static inline void tswap16s(uint16_t *s)
95 {
96 }
97 
98 static inline void tswap32s(uint32_t *s)
99 {
100 }
101 
102 static inline void tswap64s(uint64_t *s)
103 {
104 }
105 
106 #endif
107 
108 #if TARGET_LONG_SIZE == 4
109 #define tswapl(s) tswap32(s)
110 #define tswapls(s) tswap32s((uint32_t *)(s))
111 #define bswaptls(s) bswap32s(s)
112 #else
113 #define tswapl(s) tswap64(s)
114 #define tswapls(s) tswap64s((uint64_t *)(s))
115 #define bswaptls(s) bswap64s(s)
116 #endif
117 
118 /* CPU memory access without any memory or io remapping */
119 
120 /*
121  * the generic syntax for the memory accesses is:
122  *
123  * load: ld{type}{sign}{size}{endian}_{access_type}(ptr)
124  *
125  * store: st{type}{size}{endian}_{access_type}(ptr, val)
126  *
127  * type is:
128  * (empty): integer access
129  *   f    : float access
130  *
131  * sign is:
132  * (empty): for floats or 32 bit size
133  *   u    : unsigned
134  *   s    : signed
135  *
136  * size is:
137  *   b: 8 bits
138  *   w: 16 bits
139  *   l: 32 bits
140  *   q: 64 bits
141  *
142  * endian is:
143  * (empty): target cpu endianness or 8 bit access
144  *   r    : reversed target cpu endianness (not implemented yet)
145  *   be   : big endian (not implemented yet)
146  *   le   : little endian (not implemented yet)
147  *
148  * access_type is:
149  *   raw    : host memory access
150  *   user   : user mode access using soft MMU
151  *   kernel : kernel mode access using soft MMU
152  */
153 
154 /* target-endianness CPU memory access functions */
155 #if defined(TARGET_WORDS_BIGENDIAN)
156 #define lduw_p(p) lduw_be_p(p)
157 #define ldsw_p(p) ldsw_be_p(p)
158 #define ldl_p(p) ldl_be_p(p)
159 #define ldq_p(p) ldq_be_p(p)
160 #define ldfl_p(p) ldfl_be_p(p)
161 #define ldfq_p(p) ldfq_be_p(p)
162 #define stw_p(p, v) stw_be_p(p, v)
163 #define stl_p(p, v) stl_be_p(p, v)
164 #define stq_p(p, v) stq_be_p(p, v)
165 #define stfl_p(p, v) stfl_be_p(p, v)
166 #define stfq_p(p, v) stfq_be_p(p, v)
167 #else
168 #define lduw_p(p) lduw_le_p(p)
169 #define ldsw_p(p) ldsw_le_p(p)
170 #define ldl_p(p) ldl_le_p(p)
171 #define ldq_p(p) ldq_le_p(p)
172 #define ldfl_p(p) ldfl_le_p(p)
173 #define ldfq_p(p) ldfq_le_p(p)
174 #define stw_p(p, v) stw_le_p(p, v)
175 #define stl_p(p, v) stl_le_p(p, v)
176 #define stq_p(p, v) stq_le_p(p, v)
177 #define stfl_p(p, v) stfl_le_p(p, v)
178 #define stfq_p(p, v) stfq_le_p(p, v)
179 #endif
180 
181 /* MMU memory access macros */
182 
183 #if defined(CONFIG_USER_ONLY)
184 #include <assert.h>
185 #include "exec/user/abitypes.h"
186 
187 /* On some host systems the guest address space is reserved on the host.
188  * This allows the guest address space to be offset to a convenient location.
189  */
190 #if defined(CONFIG_USE_GUEST_BASE)
191 extern unsigned long guest_base;
192 extern int have_guest_base;
193 extern unsigned long reserved_va;
194 #define GUEST_BASE guest_base
195 #define RESERVED_VA reserved_va
196 #else
197 #define GUEST_BASE 0ul
198 #define RESERVED_VA 0ul
199 #endif
200 
201 #endif
202 
203 /* page related stuff */
204 
205 #define TARGET_PAGE_SIZE (1 << TARGET_PAGE_BITS)
206 #define TARGET_PAGE_MASK ~(TARGET_PAGE_SIZE - 1)
207 #define TARGET_PAGE_ALIGN(addr) (((addr) + TARGET_PAGE_SIZE - 1) & TARGET_PAGE_MASK)
208 
209 /* ??? These should be the larger of uintptr_t and target_ulong.  */
210 extern uintptr_t qemu_real_host_page_size;
211 extern uintptr_t qemu_host_page_size;
212 extern uintptr_t qemu_host_page_mask;
213 
214 #define HOST_PAGE_ALIGN(addr) (((addr) + qemu_host_page_size - 1) & qemu_host_page_mask)
215 
216 /* same as PROT_xxx */
217 #define PAGE_READ      0x0001
218 #define PAGE_WRITE     0x0002
219 #define PAGE_EXEC      0x0004
220 #define PAGE_BITS      (PAGE_READ | PAGE_WRITE | PAGE_EXEC)
221 #define PAGE_VALID     0x0008
222 /* original state of the write flag (used when tracking self-modifying
223    code */
224 #define PAGE_WRITE_ORG 0x0010
225 #if defined(CONFIG_BSD) && defined(CONFIG_USER_ONLY)
226 /* FIXME: Code that sets/uses this is broken and needs to go away.  */
227 #define PAGE_RESERVED  0x0020
228 #endif
229 
230 #if defined(CONFIG_USER_ONLY)
231 void page_dump(FILE *f);
232 
233 typedef int (*walk_memory_regions_fn)(void *, abi_ulong,
234                                       abi_ulong, unsigned long);
235 int walk_memory_regions(void *, walk_memory_regions_fn);
236 
237 int page_get_flags(target_ulong address);
238 void page_set_flags(target_ulong start, target_ulong end, int flags);
239 int page_check_range(target_ulong start, target_ulong len, int flags);
240 #endif
241 
242 CPUArchState *cpu_copy(CPUArchState *env);
243 
244 /* Flags for use in ENV->INTERRUPT_PENDING.
245 
246    The numbers assigned here are non-sequential in order to preserve
247    binary compatibility with the vmstate dump.  Bit 0 (0x0001) was
248    previously used for CPU_INTERRUPT_EXIT, and is cleared when loading
249    the vmstate dump.  */
250 
251 /* External hardware interrupt pending.  This is typically used for
252    interrupts from devices.  */
253 #define CPU_INTERRUPT_HARD        0x0002
254 
255 /* Exit the current TB.  This is typically used when some system-level device
256    makes some change to the memory mapping.  E.g. the a20 line change.  */
257 #define CPU_INTERRUPT_EXITTB      0x0004
258 
259 /* Halt the CPU.  */
260 #define CPU_INTERRUPT_HALT        0x0020
261 
262 /* Debug event pending.  */
263 #define CPU_INTERRUPT_DEBUG       0x0080
264 
265 /* Reset signal.  */
266 #define CPU_INTERRUPT_RESET       0x0400
267 
268 /* Several target-specific external hardware interrupts.  Each target/cpu.h
269    should define proper names based on these defines.  */
270 #define CPU_INTERRUPT_TGT_EXT_0   0x0008
271 #define CPU_INTERRUPT_TGT_EXT_1   0x0010
272 #define CPU_INTERRUPT_TGT_EXT_2   0x0040
273 #define CPU_INTERRUPT_TGT_EXT_3   0x0200
274 #define CPU_INTERRUPT_TGT_EXT_4   0x1000
275 
276 /* Several target-specific internal interrupts.  These differ from the
277    preceding target-specific interrupts in that they are intended to
278    originate from within the cpu itself, typically in response to some
279    instruction being executed.  These, therefore, are not masked while
280    single-stepping within the debugger.  */
281 #define CPU_INTERRUPT_TGT_INT_0   0x0100
282 #define CPU_INTERRUPT_TGT_INT_1   0x0800
283 #define CPU_INTERRUPT_TGT_INT_2   0x2000
284 
285 /* First unused bit: 0x4000.  */
286 
287 /* The set of all bits that should be masked when single-stepping.  */
288 #define CPU_INTERRUPT_SSTEP_MASK \
289     (CPU_INTERRUPT_HARD          \
290      | CPU_INTERRUPT_TGT_EXT_0   \
291      | CPU_INTERRUPT_TGT_EXT_1   \
292      | CPU_INTERRUPT_TGT_EXT_2   \
293      | CPU_INTERRUPT_TGT_EXT_3   \
294      | CPU_INTERRUPT_TGT_EXT_4)
295 
296 #if !defined(CONFIG_USER_ONLY)
297 
298 /* memory API */
299 
300 extern ram_addr_t ram_size;
301 
302 /* RAM is pre-allocated and passed into qemu_ram_alloc_from_ptr */
303 #define RAM_PREALLOC_MASK   (1 << 0)
304 
305 typedef struct RAMBlock {
306     struct MemoryRegion *mr;
307     uint8_t *host;
308     ram_addr_t offset;
309     ram_addr_t length;
310     uint32_t flags;
311     char idstr[256];
312     /* Reads can take either the iothread or the ramlist lock.
313      * Writes must take both locks.
314      */
315     QTAILQ_ENTRY(RAMBlock) next;
316     int fd;
317 } RAMBlock;
318 
319 typedef struct RAMList {
320     QemuMutex mutex;
321     /* Protected by the iothread lock.  */
322     unsigned long *dirty_memory[DIRTY_MEMORY_NUM];
323     RAMBlock *mru_block;
324     /* Protected by the ramlist lock.  */
325     QTAILQ_HEAD(, RAMBlock) blocks;
326     uint32_t version;
327 } RAMList;
328 extern RAMList ram_list;
329 
330 extern const char *mem_path;
331 extern int mem_prealloc;
332 
333 /* Flags stored in the low bits of the TLB virtual address.  These are
334    defined so that fast path ram access is all zeros.  */
335 /* Zero if TLB entry is valid.  */
336 #define TLB_INVALID_MASK   (1 << 3)
337 /* Set if TLB entry references a clean RAM page.  The iotlb entry will
338    contain the page physical address.  */
339 #define TLB_NOTDIRTY    (1 << 4)
340 /* Set if TLB entry is an IO callback.  */
341 #define TLB_MMIO        (1 << 5)
342 
343 void dump_exec_info(FILE *f, fprintf_function cpu_fprintf);
344 ram_addr_t last_ram_offset(void);
345 void qemu_mutex_lock_ramlist(void);
346 void qemu_mutex_unlock_ramlist(void);
347 #endif /* !CONFIG_USER_ONLY */
348 
349 int cpu_memory_rw_debug(CPUState *cpu, target_ulong addr,
350                         uint8_t *buf, int len, int is_write);
351 
352 #endif /* CPU_ALL_H */
353