1 /* 2 * QEMU System Emulator block driver 3 * 4 * Copyright (c) 2003 Fabrice Bellard 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 25 #ifndef BLOCK_INT_GLOBAL_STATE_H 26 #define BLOCK_INT_GLOBAL_STATE_H 27 28 #include "block/blockjob.h" 29 #include "block/block_int-common.h" 30 #include "qemu/hbitmap.h" 31 #include "qemu/main-loop.h" 32 33 /* 34 * Global state (GS) API. These functions run under the BQL. 35 * 36 * See include/block/block-global-state.h for more information about 37 * the GS API. 38 */ 39 40 /** 41 * stream_start: 42 * @job_id: The id of the newly-created job, or %NULL to use the 43 * device name of @bs. 44 * @bs: Block device to operate on. 45 * @base: Block device that will become the new base, or %NULL to 46 * flatten the whole backing file chain onto @bs. 47 * @backing_file_str: The file name that will be written to @bs as the 48 * the new backing file if the job completes. Ignored if @base is %NULL. 49 * @backing_mask_protocol: Replace potential protocol name with 'raw' in 50 * 'backing file format' header 51 * @creation_flags: Flags that control the behavior of the Job lifetime. 52 * See @BlockJobCreateFlags 53 * @speed: The maximum speed, in bytes per second, or 0 for unlimited. 54 * @on_error: The action to take upon error. 55 * @filter_node_name: The node name that should be assigned to the filter 56 * driver that the stream job inserts into the graph above 57 * @bs. NULL means that a node name should be autogenerated. 58 * @errp: Error object. 59 * 60 * Start a streaming operation on @bs. Clusters that are unallocated 61 * in @bs, but allocated in any image between @base and @bs (both 62 * exclusive) will be written to @bs. At the end of a successful 63 * streaming job, the backing file of @bs will be changed to 64 * @backing_file_str in the written image and to @base in the live 65 * BlockDriverState. 66 */ 67 void stream_start(const char *job_id, BlockDriverState *bs, 68 BlockDriverState *base, const char *backing_file_str, 69 bool backing_mask_protocol, 70 BlockDriverState *bottom, 71 int creation_flags, int64_t speed, 72 BlockdevOnError on_error, 73 const char *filter_node_name, 74 Error **errp); 75 76 /** 77 * commit_start: 78 * @job_id: The id of the newly-created job, or %NULL to use the 79 * device name of @bs. 80 * @bs: Active block device. 81 * @top: Top block device to be committed. 82 * @base: Block device that will be written into, and become the new top. 83 * @creation_flags: Flags that control the behavior of the Job lifetime. 84 * See @BlockJobCreateFlags 85 * @speed: The maximum speed, in bytes per second, or 0 for unlimited. 86 * @on_error: The action to take upon error. 87 * @backing_file_str: String to use as the backing file in @top's overlay 88 * @backing_mask_protocol: Replace potential protocol name with 'raw' in 89 * 'backing file format' header 90 * @filter_node_name: The node name that should be assigned to the filter 91 * driver that the commit job inserts into the graph above @top. NULL means 92 * that a node name should be autogenerated. 93 * @errp: Error object. 94 * 95 */ 96 void commit_start(const char *job_id, BlockDriverState *bs, 97 BlockDriverState *base, BlockDriverState *top, 98 int creation_flags, int64_t speed, 99 BlockdevOnError on_error, const char *backing_file_str, 100 bool backing_mask_protocol, 101 const char *filter_node_name, Error **errp); 102 /** 103 * commit_active_start: 104 * @job_id: The id of the newly-created job, or %NULL to use the 105 * device name of @bs. 106 * @bs: Active block device to be committed. 107 * @base: Block device that will be written into, and become the new top. 108 * @creation_flags: Flags that control the behavior of the Job lifetime. 109 * See @BlockJobCreateFlags 110 * @speed: The maximum speed, in bytes per second, or 0 for unlimited. 111 * @on_error: The action to take upon error. 112 * @filter_node_name: The node name that should be assigned to the filter 113 * driver that the commit job inserts into the graph above @bs. NULL means that 114 * a node name should be autogenerated. 115 * @cb: Completion function for the job. 116 * @opaque: Opaque pointer value passed to @cb. 117 * @auto_complete: Auto complete the job. 118 * @errp: Error object. 119 * 120 */ 121 BlockJob *commit_active_start(const char *job_id, BlockDriverState *bs, 122 BlockDriverState *base, int creation_flags, 123 int64_t speed, BlockdevOnError on_error, 124 const char *filter_node_name, 125 BlockCompletionFunc *cb, void *opaque, 126 bool auto_complete, Error **errp); 127 /* 128 * mirror_start: 129 * @job_id: The id of the newly-created job, or %NULL to use the 130 * device name of @bs. 131 * @bs: Block device to operate on. 132 * @target: Block device to write to. 133 * @replaces: Block graph node name to replace once the mirror is done. Can 134 * only be used when full mirroring is selected. 135 * @creation_flags: Flags that control the behavior of the Job lifetime. 136 * See @BlockJobCreateFlags 137 * @speed: The maximum speed, in bytes per second, or 0 for unlimited. 138 * @granularity: The chosen granularity for the dirty bitmap. 139 * @buf_size: The amount of data that can be in flight at one time. 140 * @mode: Whether to collapse all images in the chain to the target. 141 * @backing_mode: How to establish the target's backing chain after completion. 142 * @zero_target: Whether the target should be explicitly zero-initialized 143 * @on_source_error: The action to take upon error reading from the source. 144 * @on_target_error: The action to take upon error writing to the target. 145 * @unmap: Whether to unmap target where source sectors only contain zeroes. 146 * @filter_node_name: The node name that should be assigned to the filter 147 * driver that the mirror job inserts into the graph above @bs. NULL means that 148 * a node name should be autogenerated. 149 * @copy_mode: When to trigger writes to the target. 150 * @errp: Error object. 151 * 152 * Start a mirroring operation on @bs. Clusters that are allocated 153 * in @bs will be written to @target until the job is cancelled or 154 * manually completed. At the end of a successful mirroring job, 155 * @bs will be switched to read from @target. 156 */ 157 void mirror_start(const char *job_id, BlockDriverState *bs, 158 BlockDriverState *target, const char *replaces, 159 int creation_flags, int64_t speed, 160 uint32_t granularity, int64_t buf_size, 161 MirrorSyncMode mode, BlockMirrorBackingMode backing_mode, 162 bool zero_target, 163 BlockdevOnError on_source_error, 164 BlockdevOnError on_target_error, 165 bool unmap, const char *filter_node_name, 166 MirrorCopyMode copy_mode, Error **errp); 167 168 /* 169 * backup_job_create: 170 * @job_id: The id of the newly-created job, or %NULL to use the 171 * device name of @bs. 172 * @bs: Block device to operate on. 173 * @target: Block device to write to. 174 * @speed: The maximum speed, in bytes per second, or 0 for unlimited. 175 * @sync_mode: What parts of the disk image should be copied to the destination. 176 * @sync_bitmap: The dirty bitmap if sync_mode is 'bitmap' or 'incremental' 177 * @bitmap_mode: The bitmap synchronization policy to use. 178 * @perf: Performance options. All actual fields assumed to be present, 179 * all ".has_*" fields are ignored. 180 * @on_source_error: The action to take upon error reading from the source. 181 * @on_target_error: The action to take upon error writing to the target. 182 * @creation_flags: Flags that control the behavior of the Job lifetime. 183 * See @BlockJobCreateFlags 184 * @cb: Completion function for the job. 185 * @opaque: Opaque pointer value passed to @cb. 186 * @txn: Transaction that this job is part of (may be NULL). 187 * 188 * Create a backup operation on @bs. Clusters in @bs are written to @target 189 * until the job is cancelled or manually completed. 190 */ 191 BlockJob *backup_job_create(const char *job_id, BlockDriverState *bs, 192 BlockDriverState *target, int64_t speed, 193 MirrorSyncMode sync_mode, 194 BdrvDirtyBitmap *sync_bitmap, 195 BitmapSyncMode bitmap_mode, 196 bool compress, 197 const char *filter_node_name, 198 BackupPerf *perf, 199 BlockdevOnError on_source_error, 200 BlockdevOnError on_target_error, 201 int creation_flags, 202 BlockCompletionFunc *cb, void *opaque, 203 JobTxn *txn, Error **errp); 204 205 BdrvChild * GRAPH_WRLOCK 206 bdrv_root_attach_child(BlockDriverState *child_bs, const char *child_name, 207 const BdrvChildClass *child_class, 208 BdrvChildRole child_role, 209 uint64_t perm, uint64_t shared_perm, 210 void *opaque, Error **errp); 211 212 void GRAPH_WRLOCK bdrv_root_unref_child(BdrvChild *child); 213 214 void GRAPH_RDLOCK bdrv_get_cumulative_perm(BlockDriverState *bs, uint64_t *perm, 215 uint64_t *shared_perm); 216 217 /** 218 * Sets a BdrvChild's permissions. Avoid if the parent is a BDS; use 219 * bdrv_child_refresh_perms() instead and make the parent's 220 * .bdrv_child_perm() implementation return the correct values. 221 */ 222 int GRAPH_RDLOCK 223 bdrv_child_try_set_perm(BdrvChild *c, uint64_t perm, uint64_t shared, 224 Error **errp); 225 226 /** 227 * Calls bs->drv->bdrv_child_perm() and updates the child's permission 228 * masks with the result. 229 * Drivers should invoke this function whenever an event occurs that 230 * makes their .bdrv_child_perm() implementation return different 231 * values than before, but which will not result in the block layer 232 * automatically refreshing the permissions. 233 */ 234 int GRAPH_RDLOCK 235 bdrv_child_refresh_perms(BlockDriverState *bs, BdrvChild *c, Error **errp); 236 237 bool GRAPH_RDLOCK bdrv_recurse_can_replace(BlockDriverState *bs, 238 BlockDriverState *to_replace); 239 240 /* 241 * Default implementation for BlockDriver.bdrv_child_perm() that can 242 * be used by block filters and image formats, as long as they use the 243 * child_of_bds child class and set an appropriate BdrvChildRole. 244 */ 245 void bdrv_default_perms(BlockDriverState *bs, BdrvChild *c, 246 BdrvChildRole role, BlockReopenQueue *reopen_queue, 247 uint64_t perm, uint64_t shared, 248 uint64_t *nperm, uint64_t *nshared); 249 250 void blk_dev_change_media_cb(BlockBackend *blk, bool load, Error **errp); 251 bool blk_dev_has_removable_media(BlockBackend *blk); 252 void blk_dev_eject_request(BlockBackend *blk, bool force); 253 bool blk_dev_is_medium_locked(BlockBackend *blk); 254 255 void bdrv_restore_dirty_bitmap(BdrvDirtyBitmap *bitmap, HBitmap *backup); 256 257 void bdrv_set_monitor_owned(BlockDriverState *bs); 258 259 void blockdev_close_all_bdrv_states(void); 260 261 BlockDriverState *bds_tree_init(QDict *bs_opts, Error **errp); 262 263 /** 264 * Simple implementation of bdrv_co_create_opts for protocol drivers 265 * which only support creation via opening a file 266 * (usually existing raw storage device) 267 */ 268 int coroutine_fn bdrv_co_create_opts_simple(BlockDriver *drv, 269 const char *filename, 270 QemuOpts *opts, 271 Error **errp); 272 273 BdrvDirtyBitmap *block_dirty_bitmap_lookup(const char *node, 274 const char *name, 275 BlockDriverState **pbs, 276 Error **errp); 277 BdrvDirtyBitmap *block_dirty_bitmap_merge(const char *node, const char *target, 278 BlockDirtyBitmapOrStrList *bms, 279 HBitmap **backup, Error **errp); 280 BdrvDirtyBitmap *block_dirty_bitmap_remove(const char *node, const char *name, 281 bool release, 282 BlockDriverState **bitmap_bs, 283 Error **errp); 284 285 286 BlockDriverState * GRAPH_RDLOCK 287 bdrv_skip_implicit_filters(BlockDriverState *bs); 288 289 /** 290 * bdrv_add_aio_context_notifier: 291 * 292 * If a long-running job intends to be always run in the same AioContext as a 293 * certain BDS, it may use this function to be notified of changes regarding the 294 * association of the BDS to an AioContext. 295 * 296 * attached_aio_context() is called after the target BDS has been attached to a 297 * new AioContext; detach_aio_context() is called before the target BDS is being 298 * detached from its old AioContext. 299 */ 300 void bdrv_add_aio_context_notifier(BlockDriverState *bs, 301 void (*attached_aio_context)(AioContext *new_context, void *opaque), 302 void (*detach_aio_context)(void *opaque), void *opaque); 303 304 /** 305 * bdrv_remove_aio_context_notifier: 306 * 307 * Unsubscribe of change notifications regarding the BDS's AioContext. The 308 * parameters given here have to be the same as those given to 309 * bdrv_add_aio_context_notifier(). 310 */ 311 void bdrv_remove_aio_context_notifier(BlockDriverState *bs, 312 void (*aio_context_attached)(AioContext *, 313 void *), 314 void (*aio_context_detached)(void *), 315 void *opaque); 316 317 /** 318 * End all quiescent sections started by bdrv_drain_all_begin(). This is 319 * needed when deleting a BDS before bdrv_drain_all_end() is called. 320 * 321 * NOTE: this is an internal helper for bdrv_close() *only*. No one else 322 * should call it. 323 */ 324 void bdrv_drain_all_end_quiesce(BlockDriverState *bs); 325 326 #endif /* BLOCK_INT_GLOBAL_STATE_H */ 327