1 /* 2 * QEMU System Emulator block driver 3 * 4 * Copyright (c) 2003 Fabrice Bellard 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 25 #ifndef BLOCK_INT_GLOBAL_STATE_H 26 #define BLOCK_INT_GLOBAL_STATE_H 27 28 #include "block/blockjob.h" 29 #include "block/block_int-common.h" 30 #include "qemu/hbitmap.h" 31 #include "qemu/main-loop.h" 32 33 /* 34 * Global state (GS) API. These functions run under the BQL. 35 * 36 * See include/block/block-global-state.h for more information about 37 * the GS API. 38 */ 39 40 /** 41 * stream_start: 42 * @job_id: The id of the newly-created job, or %NULL to use the 43 * device name of @bs. 44 * @bs: Block device to operate on. 45 * @base: Block device that will become the new base, or %NULL to 46 * flatten the whole backing file chain onto @bs. 47 * @backing_file_str: The file name that will be written to @bs as the 48 * the new backing file if the job completes. Ignored if @base is %NULL. 49 * @creation_flags: Flags that control the behavior of the Job lifetime. 50 * See @BlockJobCreateFlags 51 * @speed: The maximum speed, in bytes per second, or 0 for unlimited. 52 * @on_error: The action to take upon error. 53 * @filter_node_name: The node name that should be assigned to the filter 54 * driver that the stream job inserts into the graph above 55 * @bs. NULL means that a node name should be autogenerated. 56 * @errp: Error object. 57 * 58 * Start a streaming operation on @bs. Clusters that are unallocated 59 * in @bs, but allocated in any image between @base and @bs (both 60 * exclusive) will be written to @bs. At the end of a successful 61 * streaming job, the backing file of @bs will be changed to 62 * @backing_file_str in the written image and to @base in the live 63 * BlockDriverState. 64 */ 65 void stream_start(const char *job_id, BlockDriverState *bs, 66 BlockDriverState *base, const char *backing_file_str, 67 BlockDriverState *bottom, 68 int creation_flags, int64_t speed, 69 BlockdevOnError on_error, 70 const char *filter_node_name, 71 Error **errp); 72 73 /** 74 * commit_start: 75 * @job_id: The id of the newly-created job, or %NULL to use the 76 * device name of @bs. 77 * @bs: Active block device. 78 * @top: Top block device to be committed. 79 * @base: Block device that will be written into, and become the new top. 80 * @creation_flags: Flags that control the behavior of the Job lifetime. 81 * See @BlockJobCreateFlags 82 * @speed: The maximum speed, in bytes per second, or 0 for unlimited. 83 * @on_error: The action to take upon error. 84 * @backing_file_str: String to use as the backing file in @top's overlay 85 * @filter_node_name: The node name that should be assigned to the filter 86 * driver that the commit job inserts into the graph above @top. NULL means 87 * that a node name should be autogenerated. 88 * @errp: Error object. 89 * 90 */ 91 void commit_start(const char *job_id, BlockDriverState *bs, 92 BlockDriverState *base, BlockDriverState *top, 93 int creation_flags, int64_t speed, 94 BlockdevOnError on_error, const char *backing_file_str, 95 const char *filter_node_name, Error **errp); 96 /** 97 * commit_active_start: 98 * @job_id: The id of the newly-created job, or %NULL to use the 99 * device name of @bs. 100 * @bs: Active block device to be committed. 101 * @base: Block device that will be written into, and become the new top. 102 * @creation_flags: Flags that control the behavior of the Job lifetime. 103 * See @BlockJobCreateFlags 104 * @speed: The maximum speed, in bytes per second, or 0 for unlimited. 105 * @on_error: The action to take upon error. 106 * @filter_node_name: The node name that should be assigned to the filter 107 * driver that the commit job inserts into the graph above @bs. NULL means that 108 * a node name should be autogenerated. 109 * @cb: Completion function for the job. 110 * @opaque: Opaque pointer value passed to @cb. 111 * @auto_complete: Auto complete the job. 112 * @errp: Error object. 113 * 114 */ 115 BlockJob *commit_active_start(const char *job_id, BlockDriverState *bs, 116 BlockDriverState *base, int creation_flags, 117 int64_t speed, BlockdevOnError on_error, 118 const char *filter_node_name, 119 BlockCompletionFunc *cb, void *opaque, 120 bool auto_complete, Error **errp); 121 /* 122 * mirror_start: 123 * @job_id: The id of the newly-created job, or %NULL to use the 124 * device name of @bs. 125 * @bs: Block device to operate on. 126 * @target: Block device to write to. 127 * @replaces: Block graph node name to replace once the mirror is done. Can 128 * only be used when full mirroring is selected. 129 * @creation_flags: Flags that control the behavior of the Job lifetime. 130 * See @BlockJobCreateFlags 131 * @speed: The maximum speed, in bytes per second, or 0 for unlimited. 132 * @granularity: The chosen granularity for the dirty bitmap. 133 * @buf_size: The amount of data that can be in flight at one time. 134 * @mode: Whether to collapse all images in the chain to the target. 135 * @backing_mode: How to establish the target's backing chain after completion. 136 * @zero_target: Whether the target should be explicitly zero-initialized 137 * @on_source_error: The action to take upon error reading from the source. 138 * @on_target_error: The action to take upon error writing to the target. 139 * @unmap: Whether to unmap target where source sectors only contain zeroes. 140 * @filter_node_name: The node name that should be assigned to the filter 141 * driver that the mirror job inserts into the graph above @bs. NULL means that 142 * a node name should be autogenerated. 143 * @copy_mode: When to trigger writes to the target. 144 * @errp: Error object. 145 * 146 * Start a mirroring operation on @bs. Clusters that are allocated 147 * in @bs will be written to @target until the job is cancelled or 148 * manually completed. At the end of a successful mirroring job, 149 * @bs will be switched to read from @target. 150 */ 151 void mirror_start(const char *job_id, BlockDriverState *bs, 152 BlockDriverState *target, const char *replaces, 153 int creation_flags, int64_t speed, 154 uint32_t granularity, int64_t buf_size, 155 MirrorSyncMode mode, BlockMirrorBackingMode backing_mode, 156 bool zero_target, 157 BlockdevOnError on_source_error, 158 BlockdevOnError on_target_error, 159 bool unmap, const char *filter_node_name, 160 MirrorCopyMode copy_mode, Error **errp); 161 162 /* 163 * backup_job_create: 164 * @job_id: The id of the newly-created job, or %NULL to use the 165 * device name of @bs. 166 * @bs: Block device to operate on. 167 * @target: Block device to write to. 168 * @speed: The maximum speed, in bytes per second, or 0 for unlimited. 169 * @sync_mode: What parts of the disk image should be copied to the destination. 170 * @sync_bitmap: The dirty bitmap if sync_mode is 'bitmap' or 'incremental' 171 * @bitmap_mode: The bitmap synchronization policy to use. 172 * @perf: Performance options. All actual fields assumed to be present, 173 * all ".has_*" fields are ignored. 174 * @on_source_error: The action to take upon error reading from the source. 175 * @on_target_error: The action to take upon error writing to the target. 176 * @creation_flags: Flags that control the behavior of the Job lifetime. 177 * See @BlockJobCreateFlags 178 * @cb: Completion function for the job. 179 * @opaque: Opaque pointer value passed to @cb. 180 * @txn: Transaction that this job is part of (may be NULL). 181 * 182 * Create a backup operation on @bs. Clusters in @bs are written to @target 183 * until the job is cancelled or manually completed. 184 */ 185 BlockJob *backup_job_create(const char *job_id, BlockDriverState *bs, 186 BlockDriverState *target, int64_t speed, 187 MirrorSyncMode sync_mode, 188 BdrvDirtyBitmap *sync_bitmap, 189 BitmapSyncMode bitmap_mode, 190 bool compress, 191 const char *filter_node_name, 192 BackupPerf *perf, 193 BlockdevOnError on_source_error, 194 BlockdevOnError on_target_error, 195 int creation_flags, 196 BlockCompletionFunc *cb, void *opaque, 197 JobTxn *txn, Error **errp); 198 199 BdrvChild *bdrv_root_attach_child(BlockDriverState *child_bs, 200 const char *child_name, 201 const BdrvChildClass *child_class, 202 BdrvChildRole child_role, 203 uint64_t perm, uint64_t shared_perm, 204 void *opaque, Error **errp); 205 void bdrv_root_unref_child(BdrvChild *child); 206 207 void bdrv_get_cumulative_perm(BlockDriverState *bs, uint64_t *perm, 208 uint64_t *shared_perm); 209 210 /** 211 * Sets a BdrvChild's permissions. Avoid if the parent is a BDS; use 212 * bdrv_child_refresh_perms() instead and make the parent's 213 * .bdrv_child_perm() implementation return the correct values. 214 */ 215 int bdrv_child_try_set_perm(BdrvChild *c, uint64_t perm, uint64_t shared, 216 Error **errp); 217 218 /** 219 * Calls bs->drv->bdrv_child_perm() and updates the child's permission 220 * masks with the result. 221 * Drivers should invoke this function whenever an event occurs that 222 * makes their .bdrv_child_perm() implementation return different 223 * values than before, but which will not result in the block layer 224 * automatically refreshing the permissions. 225 */ 226 int bdrv_child_refresh_perms(BlockDriverState *bs, BdrvChild *c, Error **errp); 227 228 bool GRAPH_RDLOCK bdrv_recurse_can_replace(BlockDriverState *bs, 229 BlockDriverState *to_replace); 230 231 /* 232 * Default implementation for BlockDriver.bdrv_child_perm() that can 233 * be used by block filters and image formats, as long as they use the 234 * child_of_bds child class and set an appropriate BdrvChildRole. 235 */ 236 void bdrv_default_perms(BlockDriverState *bs, BdrvChild *c, 237 BdrvChildRole role, BlockReopenQueue *reopen_queue, 238 uint64_t perm, uint64_t shared, 239 uint64_t *nperm, uint64_t *nshared); 240 241 void blk_dev_change_media_cb(BlockBackend *blk, bool load, Error **errp); 242 bool blk_dev_has_removable_media(BlockBackend *blk); 243 void blk_dev_eject_request(BlockBackend *blk, bool force); 244 bool blk_dev_is_medium_locked(BlockBackend *blk); 245 246 void bdrv_restore_dirty_bitmap(BdrvDirtyBitmap *bitmap, HBitmap *backup); 247 248 void bdrv_set_monitor_owned(BlockDriverState *bs); 249 250 void blockdev_close_all_bdrv_states(void); 251 252 BlockDriverState *bds_tree_init(QDict *bs_opts, Error **errp); 253 254 /** 255 * Simple implementation of bdrv_co_create_opts for protocol drivers 256 * which only support creation via opening a file 257 * (usually existing raw storage device) 258 */ 259 int coroutine_fn bdrv_co_create_opts_simple(BlockDriver *drv, 260 const char *filename, 261 QemuOpts *opts, 262 Error **errp); 263 264 BdrvDirtyBitmap *block_dirty_bitmap_lookup(const char *node, 265 const char *name, 266 BlockDriverState **pbs, 267 Error **errp); 268 BdrvDirtyBitmap *block_dirty_bitmap_merge(const char *node, const char *target, 269 BlockDirtyBitmapOrStrList *bms, 270 HBitmap **backup, Error **errp); 271 BdrvDirtyBitmap *block_dirty_bitmap_remove(const char *node, const char *name, 272 bool release, 273 BlockDriverState **bitmap_bs, 274 Error **errp); 275 276 277 BlockDriverState *bdrv_skip_implicit_filters(BlockDriverState *bs); 278 279 /** 280 * bdrv_add_aio_context_notifier: 281 * 282 * If a long-running job intends to be always run in the same AioContext as a 283 * certain BDS, it may use this function to be notified of changes regarding the 284 * association of the BDS to an AioContext. 285 * 286 * attached_aio_context() is called after the target BDS has been attached to a 287 * new AioContext; detach_aio_context() is called before the target BDS is being 288 * detached from its old AioContext. 289 */ 290 void bdrv_add_aio_context_notifier(BlockDriverState *bs, 291 void (*attached_aio_context)(AioContext *new_context, void *opaque), 292 void (*detach_aio_context)(void *opaque), void *opaque); 293 294 /** 295 * bdrv_remove_aio_context_notifier: 296 * 297 * Unsubscribe of change notifications regarding the BDS's AioContext. The 298 * parameters given here have to be the same as those given to 299 * bdrv_add_aio_context_notifier(). 300 */ 301 void bdrv_remove_aio_context_notifier(BlockDriverState *bs, 302 void (*aio_context_attached)(AioContext *, 303 void *), 304 void (*aio_context_detached)(void *), 305 void *opaque); 306 307 /** 308 * End all quiescent sections started by bdrv_drain_all_begin(). This is 309 * needed when deleting a BDS before bdrv_drain_all_end() is called. 310 * 311 * NOTE: this is an internal helper for bdrv_close() *only*. No one else 312 * should call it. 313 */ 314 void bdrv_drain_all_end_quiesce(BlockDriverState *bs); 315 316 #endif /* BLOCK_INT_GLOBAL_STATE_H */ 317