xref: /openbmc/qemu/hw/vfio/pci.h (revision fbf32752)
1 /*
2  * vfio based device assignment support - PCI devices
3  *
4  * Copyright Red Hat, Inc. 2012-2015
5  *
6  * Authors:
7  *  Alex Williamson <alex.williamson@redhat.com>
8  *
9  * This work is licensed under the terms of the GNU GPL, version 2.  See
10  * the COPYING file in the top-level directory.
11  */
12 #ifndef HW_VFIO_VFIO_PCI_H
13 #define HW_VFIO_VFIO_PCI_H
14 
15 #include "qemu-common.h"
16 #include "exec/memory.h"
17 #include "hw/pci/pci.h"
18 #include "hw/vfio/vfio-common.h"
19 #include "qemu/event_notifier.h"
20 #include "qemu/queue.h"
21 #include "qemu/timer.h"
22 
23 #define PCI_ANY_ID (~0)
24 
25 struct VFIOPCIDevice;
26 
27 typedef struct VFIOQuirk {
28     QLIST_ENTRY(VFIOQuirk) next;
29     void *data;
30     int nr_mem;
31     MemoryRegion *mem;
32 } VFIOQuirk;
33 
34 typedef struct VFIOBAR {
35     VFIORegion region;
36     MemoryRegion *mr;
37     size_t size;
38     uint8_t type;
39     bool ioport;
40     bool mem64;
41     QLIST_HEAD(, VFIOQuirk) quirks;
42 } VFIOBAR;
43 
44 typedef struct VFIOVGARegion {
45     MemoryRegion mem;
46     off_t offset;
47     int nr;
48     QLIST_HEAD(, VFIOQuirk) quirks;
49 } VFIOVGARegion;
50 
51 typedef struct VFIOVGA {
52     off_t fd_offset;
53     int fd;
54     VFIOVGARegion region[QEMU_PCI_VGA_NUM_REGIONS];
55 } VFIOVGA;
56 
57 typedef struct VFIOINTx {
58     bool pending; /* interrupt pending */
59     bool kvm_accel; /* set when QEMU bypass through KVM enabled */
60     uint8_t pin; /* which pin to pull for qemu_set_irq */
61     EventNotifier interrupt; /* eventfd triggered on interrupt */
62     EventNotifier unmask; /* eventfd for unmask on QEMU bypass */
63     PCIINTxRoute route; /* routing info for QEMU bypass */
64     uint32_t mmap_timeout; /* delay to re-enable mmaps after interrupt */
65     QEMUTimer *mmap_timer; /* enable mmaps after periods w/o interrupts */
66 } VFIOINTx;
67 
68 typedef struct VFIOMSIVector {
69     /*
70      * Two interrupt paths are configured per vector.  The first, is only used
71      * for interrupts injected via QEMU.  This is typically the non-accel path,
72      * but may also be used when we want QEMU to handle masking and pending
73      * bits.  The KVM path bypasses QEMU and is therefore higher performance,
74      * but requires masking at the device.  virq is used to track the MSI route
75      * through KVM, thus kvm_interrupt is only available when virq is set to a
76      * valid (>= 0) value.
77      */
78     EventNotifier interrupt;
79     EventNotifier kvm_interrupt;
80     struct VFIOPCIDevice *vdev; /* back pointer to device */
81     int virq;
82     bool use;
83 } VFIOMSIVector;
84 
85 enum {
86     VFIO_INT_NONE = 0,
87     VFIO_INT_INTx = 1,
88     VFIO_INT_MSI  = 2,
89     VFIO_INT_MSIX = 3,
90 };
91 
92 /* Cache of MSI-X setup */
93 typedef struct VFIOMSIXInfo {
94     uint8_t table_bar;
95     uint8_t pba_bar;
96     uint16_t entries;
97     uint32_t table_offset;
98     uint32_t pba_offset;
99     unsigned long *pending;
100 } VFIOMSIXInfo;
101 
102 typedef struct VFIOPCIDevice {
103     PCIDevice pdev;
104     VFIODevice vbasedev;
105     VFIOINTx intx;
106     unsigned int config_size;
107     uint8_t *emulated_config_bits; /* QEMU emulated bits, little-endian */
108     off_t config_offset; /* Offset of config space region within device fd */
109     unsigned int rom_size;
110     off_t rom_offset; /* Offset of ROM region within device fd */
111     void *rom;
112     int msi_cap_size;
113     VFIOMSIVector *msi_vectors;
114     VFIOMSIXInfo *msix;
115     int nr_vectors; /* Number of MSI/MSIX vectors currently in use */
116     int interrupt; /* Current interrupt type */
117     VFIOBAR bars[PCI_NUM_REGIONS - 1]; /* No ROM */
118     VFIOVGA *vga; /* 0xa0000, 0x3b0, 0x3c0 */
119     void *igd_opregion;
120     PCIHostDeviceAddress host;
121     EventNotifier err_notifier;
122     EventNotifier req_notifier;
123     int (*resetfn)(struct VFIOPCIDevice *);
124     uint32_t vendor_id;
125     uint32_t device_id;
126     uint32_t sub_vendor_id;
127     uint32_t sub_device_id;
128     uint32_t features;
129 #define VFIO_FEATURE_ENABLE_VGA_BIT 0
130 #define VFIO_FEATURE_ENABLE_VGA (1 << VFIO_FEATURE_ENABLE_VGA_BIT)
131 #define VFIO_FEATURE_ENABLE_REQ_BIT 1
132 #define VFIO_FEATURE_ENABLE_REQ (1 << VFIO_FEATURE_ENABLE_REQ_BIT)
133 #define VFIO_FEATURE_ENABLE_IGD_OPREGION_BIT 2
134 #define VFIO_FEATURE_ENABLE_IGD_OPREGION \
135                                 (1 << VFIO_FEATURE_ENABLE_IGD_OPREGION_BIT)
136     OnOffAuto display;
137     int32_t bootindex;
138     uint32_t igd_gms;
139     OffAutoPCIBAR msix_relo;
140     uint8_t pm_cap;
141     uint8_t nv_gpudirect_clique;
142     bool pci_aer;
143     bool req_enabled;
144     bool has_flr;
145     bool has_pm_reset;
146     bool rom_read_failed;
147     bool no_kvm_intx;
148     bool no_kvm_msi;
149     bool no_kvm_msix;
150     bool no_geforce_quirks;
151     VFIODisplay *dpy;
152 } VFIOPCIDevice;
153 
154 uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len);
155 void vfio_pci_write_config(PCIDevice *pdev,
156                            uint32_t addr, uint32_t val, int len);
157 
158 uint64_t vfio_vga_read(void *opaque, hwaddr addr, unsigned size);
159 void vfio_vga_write(void *opaque, hwaddr addr, uint64_t data, unsigned size);
160 
161 bool vfio_blacklist_opt_rom(VFIOPCIDevice *vdev);
162 void vfio_vga_quirk_setup(VFIOPCIDevice *vdev);
163 void vfio_vga_quirk_exit(VFIOPCIDevice *vdev);
164 void vfio_vga_quirk_finalize(VFIOPCIDevice *vdev);
165 void vfio_bar_quirk_setup(VFIOPCIDevice *vdev, int nr);
166 void vfio_bar_quirk_exit(VFIOPCIDevice *vdev, int nr);
167 void vfio_bar_quirk_finalize(VFIOPCIDevice *vdev, int nr);
168 void vfio_setup_resetfn_quirk(VFIOPCIDevice *vdev);
169 int vfio_add_virt_caps(VFIOPCIDevice *vdev, Error **errp);
170 
171 extern const PropertyInfo qdev_prop_nv_gpudirect_clique;
172 
173 int vfio_populate_vga(VFIOPCIDevice *vdev, Error **errp);
174 
175 int vfio_pci_igd_opregion_init(VFIOPCIDevice *vdev,
176                                struct vfio_region_info *info,
177                                Error **errp);
178 
179 int vfio_display_probe(VFIOPCIDevice *vdev, Error **errp);
180 void vfio_display_finalize(VFIOPCIDevice *vdev);
181 
182 #endif /* HW_VFIO_VFIO_PCI_H */
183