xref: /openbmc/qemu/hw/vfio/pci.h (revision 55bbc861)
1 /*
2  * vfio based device assignment support - PCI devices
3  *
4  * Copyright Red Hat, Inc. 2012-2015
5  *
6  * Authors:
7  *  Alex Williamson <alex.williamson@redhat.com>
8  *
9  * This work is licensed under the terms of the GNU GPL, version 2.  See
10  * the COPYING file in the top-level directory.
11  */
12 #ifndef HW_VFIO_VFIO_PCI_H
13 #define HW_VFIO_VFIO_PCI_H
14 
15 #include "qemu-common.h"
16 #include "exec/memory.h"
17 #include "hw/pci/pci.h"
18 #include "hw/vfio/vfio-common.h"
19 #include "qemu/event_notifier.h"
20 #include "qemu/queue.h"
21 #include "qemu/timer.h"
22 
23 #define PCI_ANY_ID (~0)
24 
25 struct VFIOPCIDevice;
26 
27 typedef struct VFIOQuirk {
28     QLIST_ENTRY(VFIOQuirk) next;
29     void *data;
30     int nr_mem;
31     MemoryRegion *mem;
32 } VFIOQuirk;
33 
34 typedef struct VFIOBAR {
35     VFIORegion region;
36     bool ioport;
37     bool mem64;
38     QLIST_HEAD(, VFIOQuirk) quirks;
39 } VFIOBAR;
40 
41 typedef struct VFIOVGARegion {
42     MemoryRegion mem;
43     off_t offset;
44     int nr;
45     QLIST_HEAD(, VFIOQuirk) quirks;
46 } VFIOVGARegion;
47 
48 typedef struct VFIOVGA {
49     off_t fd_offset;
50     int fd;
51     VFIOVGARegion region[QEMU_PCI_VGA_NUM_REGIONS];
52 } VFIOVGA;
53 
54 typedef struct VFIOINTx {
55     bool pending; /* interrupt pending */
56     bool kvm_accel; /* set when QEMU bypass through KVM enabled */
57     uint8_t pin; /* which pin to pull for qemu_set_irq */
58     EventNotifier interrupt; /* eventfd triggered on interrupt */
59     EventNotifier unmask; /* eventfd for unmask on QEMU bypass */
60     PCIINTxRoute route; /* routing info for QEMU bypass */
61     uint32_t mmap_timeout; /* delay to re-enable mmaps after interrupt */
62     QEMUTimer *mmap_timer; /* enable mmaps after periods w/o interrupts */
63 } VFIOINTx;
64 
65 typedef struct VFIOMSIVector {
66     /*
67      * Two interrupt paths are configured per vector.  The first, is only used
68      * for interrupts injected via QEMU.  This is typically the non-accel path,
69      * but may also be used when we want QEMU to handle masking and pending
70      * bits.  The KVM path bypasses QEMU and is therefore higher performance,
71      * but requires masking at the device.  virq is used to track the MSI route
72      * through KVM, thus kvm_interrupt is only available when virq is set to a
73      * valid (>= 0) value.
74      */
75     EventNotifier interrupt;
76     EventNotifier kvm_interrupt;
77     struct VFIOPCIDevice *vdev; /* back pointer to device */
78     int virq;
79     bool use;
80 } VFIOMSIVector;
81 
82 enum {
83     VFIO_INT_NONE = 0,
84     VFIO_INT_INTx = 1,
85     VFIO_INT_MSI  = 2,
86     VFIO_INT_MSIX = 3,
87 };
88 
89 /* Cache of MSI-X setup plus extra mmap and memory region for split BAR map */
90 typedef struct VFIOMSIXInfo {
91     uint8_t table_bar;
92     uint8_t pba_bar;
93     uint16_t entries;
94     uint32_t table_offset;
95     uint32_t pba_offset;
96     unsigned long *pending;
97 } VFIOMSIXInfo;
98 
99 typedef struct VFIOPCIDevice {
100     PCIDevice pdev;
101     VFIODevice vbasedev;
102     VFIOINTx intx;
103     unsigned int config_size;
104     uint8_t *emulated_config_bits; /* QEMU emulated bits, little-endian */
105     off_t config_offset; /* Offset of config space region within device fd */
106     unsigned int rom_size;
107     off_t rom_offset; /* Offset of ROM region within device fd */
108     void *rom;
109     int msi_cap_size;
110     VFIOMSIVector *msi_vectors;
111     VFIOMSIXInfo *msix;
112     int nr_vectors; /* Number of MSI/MSIX vectors currently in use */
113     int interrupt; /* Current interrupt type */
114     VFIOBAR bars[PCI_NUM_REGIONS - 1]; /* No ROM */
115     VFIOVGA *vga; /* 0xa0000, 0x3b0, 0x3c0 */
116     void *igd_opregion;
117     PCIHostDeviceAddress host;
118     EventNotifier err_notifier;
119     EventNotifier req_notifier;
120     int (*resetfn)(struct VFIOPCIDevice *);
121     uint32_t vendor_id;
122     uint32_t device_id;
123     uint32_t sub_vendor_id;
124     uint32_t sub_device_id;
125     uint32_t features;
126 #define VFIO_FEATURE_ENABLE_VGA_BIT 0
127 #define VFIO_FEATURE_ENABLE_VGA (1 << VFIO_FEATURE_ENABLE_VGA_BIT)
128 #define VFIO_FEATURE_ENABLE_REQ_BIT 1
129 #define VFIO_FEATURE_ENABLE_REQ (1 << VFIO_FEATURE_ENABLE_REQ_BIT)
130 #define VFIO_FEATURE_ENABLE_IGD_OPREGION_BIT 2
131 #define VFIO_FEATURE_ENABLE_IGD_OPREGION \
132                                 (1 << VFIO_FEATURE_ENABLE_IGD_OPREGION_BIT)
133     int32_t bootindex;
134     uint32_t igd_gms;
135     uint8_t pm_cap;
136     uint8_t nv_gpudirect_clique;
137     bool pci_aer;
138     bool req_enabled;
139     bool has_flr;
140     bool has_pm_reset;
141     bool rom_read_failed;
142     bool no_kvm_intx;
143     bool no_kvm_msi;
144     bool no_kvm_msix;
145 } VFIOPCIDevice;
146 
147 uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len);
148 void vfio_pci_write_config(PCIDevice *pdev,
149                            uint32_t addr, uint32_t val, int len);
150 
151 uint64_t vfio_vga_read(void *opaque, hwaddr addr, unsigned size);
152 void vfio_vga_write(void *opaque, hwaddr addr, uint64_t data, unsigned size);
153 
154 bool vfio_blacklist_opt_rom(VFIOPCIDevice *vdev);
155 void vfio_vga_quirk_setup(VFIOPCIDevice *vdev);
156 void vfio_vga_quirk_exit(VFIOPCIDevice *vdev);
157 void vfio_vga_quirk_finalize(VFIOPCIDevice *vdev);
158 void vfio_bar_quirk_setup(VFIOPCIDevice *vdev, int nr);
159 void vfio_bar_quirk_exit(VFIOPCIDevice *vdev, int nr);
160 void vfio_bar_quirk_finalize(VFIOPCIDevice *vdev, int nr);
161 void vfio_setup_resetfn_quirk(VFIOPCIDevice *vdev);
162 int vfio_add_virt_caps(VFIOPCIDevice *vdev, Error **errp);
163 
164 extern const PropertyInfo qdev_prop_nv_gpudirect_clique;
165 
166 int vfio_populate_vga(VFIOPCIDevice *vdev, Error **errp);
167 
168 int vfio_pci_igd_opregion_init(VFIOPCIDevice *vdev,
169                                struct vfio_region_info *info,
170                                Error **errp);
171 
172 #endif /* HW_VFIO_VFIO_PCI_H */
173