xref: /openbmc/qemu/hw/vfio/common.c (revision 77a8257e)
1 /*
2  * generic functions used by VFIO devices
3  *
4  * Copyright Red Hat, Inc. 2012
5  *
6  * Authors:
7  *  Alex Williamson <alex.williamson@redhat.com>
8  *
9  * This work is licensed under the terms of the GNU GPL, version 2.  See
10  * the COPYING file in the top-level directory.
11  *
12  * Based on qemu-kvm device-assignment:
13  *  Adapted for KVM by Qumranet.
14  *  Copyright (c) 2007, Neocleus, Alex Novik (alex@neocleus.com)
15  *  Copyright (c) 2007, Neocleus, Guy Zana (guy@neocleus.com)
16  *  Copyright (C) 2008, Qumranet, Amit Shah (amit.shah@qumranet.com)
17  *  Copyright (C) 2008, Red Hat, Amit Shah (amit.shah@redhat.com)
18  *  Copyright (C) 2008, IBM, Muli Ben-Yehuda (muli@il.ibm.com)
19  */
20 
21 #include <sys/ioctl.h>
22 #include <sys/mman.h>
23 #include <linux/vfio.h>
24 
25 #include "hw/vfio/vfio-common.h"
26 #include "hw/vfio/vfio.h"
27 #include "exec/address-spaces.h"
28 #include "exec/memory.h"
29 #include "hw/hw.h"
30 #include "qemu/error-report.h"
31 #include "sysemu/kvm.h"
32 #include "trace.h"
33 
34 struct vfio_group_head vfio_group_list =
35     QLIST_HEAD_INITIALIZER(vfio_group_list);
36 struct vfio_as_head vfio_address_spaces =
37     QLIST_HEAD_INITIALIZER(vfio_address_spaces);
38 
39 #ifdef CONFIG_KVM
40 /*
41  * We have a single VFIO pseudo device per KVM VM.  Once created it lives
42  * for the life of the VM.  Closing the file descriptor only drops our
43  * reference to it and the device's reference to kvm.  Therefore once
44  * initialized, this file descriptor is only released on QEMU exit and
45  * we'll re-use it should another vfio device be attached before then.
46  */
47 static int vfio_kvm_device_fd = -1;
48 #endif
49 
50 /*
51  * Common VFIO interrupt disable
52  */
53 void vfio_disable_irqindex(VFIODevice *vbasedev, int index)
54 {
55     struct vfio_irq_set irq_set = {
56         .argsz = sizeof(irq_set),
57         .flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_TRIGGER,
58         .index = index,
59         .start = 0,
60         .count = 0,
61     };
62 
63     ioctl(vbasedev->fd, VFIO_DEVICE_SET_IRQS, &irq_set);
64 }
65 
66 void vfio_unmask_single_irqindex(VFIODevice *vbasedev, int index)
67 {
68     struct vfio_irq_set irq_set = {
69         .argsz = sizeof(irq_set),
70         .flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_UNMASK,
71         .index = index,
72         .start = 0,
73         .count = 1,
74     };
75 
76     ioctl(vbasedev->fd, VFIO_DEVICE_SET_IRQS, &irq_set);
77 }
78 
79 void vfio_mask_single_irqindex(VFIODevice *vbasedev, int index)
80 {
81     struct vfio_irq_set irq_set = {
82         .argsz = sizeof(irq_set),
83         .flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_MASK,
84         .index = index,
85         .start = 0,
86         .count = 1,
87     };
88 
89     ioctl(vbasedev->fd, VFIO_DEVICE_SET_IRQS, &irq_set);
90 }
91 
92 /*
93  * IO Port/MMIO - Beware of the endians, VFIO is always little endian
94  */
95 void vfio_region_write(void *opaque, hwaddr addr,
96                        uint64_t data, unsigned size)
97 {
98     VFIORegion *region = opaque;
99     VFIODevice *vbasedev = region->vbasedev;
100     union {
101         uint8_t byte;
102         uint16_t word;
103         uint32_t dword;
104         uint64_t qword;
105     } buf;
106 
107     switch (size) {
108     case 1:
109         buf.byte = data;
110         break;
111     case 2:
112         buf.word = cpu_to_le16(data);
113         break;
114     case 4:
115         buf.dword = cpu_to_le32(data);
116         break;
117     default:
118         hw_error("vfio: unsupported write size, %d bytes", size);
119         break;
120     }
121 
122     if (pwrite(vbasedev->fd, &buf, size, region->fd_offset + addr) != size) {
123         error_report("%s(%s:region%d+0x%"HWADDR_PRIx", 0x%"PRIx64
124                      ",%d) failed: %m",
125                      __func__, vbasedev->name, region->nr,
126                      addr, data, size);
127     }
128 
129     trace_vfio_region_write(vbasedev->name, region->nr, addr, data, size);
130 
131     /*
132      * A read or write to a BAR always signals an INTx EOI.  This will
133      * do nothing if not pending (including not in INTx mode).  We assume
134      * that a BAR access is in response to an interrupt and that BAR
135      * accesses will service the interrupt.  Unfortunately, we don't know
136      * which access will service the interrupt, so we're potentially
137      * getting quite a few host interrupts per guest interrupt.
138      */
139     vbasedev->ops->vfio_eoi(vbasedev);
140 }
141 
142 uint64_t vfio_region_read(void *opaque,
143                           hwaddr addr, unsigned size)
144 {
145     VFIORegion *region = opaque;
146     VFIODevice *vbasedev = region->vbasedev;
147     union {
148         uint8_t byte;
149         uint16_t word;
150         uint32_t dword;
151         uint64_t qword;
152     } buf;
153     uint64_t data = 0;
154 
155     if (pread(vbasedev->fd, &buf, size, region->fd_offset + addr) != size) {
156         error_report("%s(%s:region%d+0x%"HWADDR_PRIx", %d) failed: %m",
157                      __func__, vbasedev->name, region->nr,
158                      addr, size);
159         return (uint64_t)-1;
160     }
161     switch (size) {
162     case 1:
163         data = buf.byte;
164         break;
165     case 2:
166         data = le16_to_cpu(buf.word);
167         break;
168     case 4:
169         data = le32_to_cpu(buf.dword);
170         break;
171     default:
172         hw_error("vfio: unsupported read size, %d bytes", size);
173         break;
174     }
175 
176     trace_vfio_region_read(vbasedev->name, region->nr, addr, size, data);
177 
178     /* Same as write above */
179     vbasedev->ops->vfio_eoi(vbasedev);
180 
181     return data;
182 }
183 
184 const MemoryRegionOps vfio_region_ops = {
185     .read = vfio_region_read,
186     .write = vfio_region_write,
187     .endianness = DEVICE_LITTLE_ENDIAN,
188 };
189 
190 /*
191  * DMA - Mapping and unmapping for the "type1" IOMMU interface used on x86
192  */
193 static int vfio_dma_unmap(VFIOContainer *container,
194                           hwaddr iova, ram_addr_t size)
195 {
196     struct vfio_iommu_type1_dma_unmap unmap = {
197         .argsz = sizeof(unmap),
198         .flags = 0,
199         .iova = iova,
200         .size = size,
201     };
202 
203     if (ioctl(container->fd, VFIO_IOMMU_UNMAP_DMA, &unmap)) {
204         error_report("VFIO_UNMAP_DMA: %d", -errno);
205         return -errno;
206     }
207 
208     return 0;
209 }
210 
211 static int vfio_dma_map(VFIOContainer *container, hwaddr iova,
212                         ram_addr_t size, void *vaddr, bool readonly)
213 {
214     struct vfio_iommu_type1_dma_map map = {
215         .argsz = sizeof(map),
216         .flags = VFIO_DMA_MAP_FLAG_READ,
217         .vaddr = (__u64)(uintptr_t)vaddr,
218         .iova = iova,
219         .size = size,
220     };
221 
222     if (!readonly) {
223         map.flags |= VFIO_DMA_MAP_FLAG_WRITE;
224     }
225 
226     /*
227      * Try the mapping, if it fails with EBUSY, unmap the region and try
228      * again.  This shouldn't be necessary, but we sometimes see it in
229      * the the VGA ROM space.
230      */
231     if (ioctl(container->fd, VFIO_IOMMU_MAP_DMA, &map) == 0 ||
232         (errno == EBUSY && vfio_dma_unmap(container, iova, size) == 0 &&
233          ioctl(container->fd, VFIO_IOMMU_MAP_DMA, &map) == 0)) {
234         return 0;
235     }
236 
237     error_report("VFIO_MAP_DMA: %d", -errno);
238     return -errno;
239 }
240 
241 static bool vfio_listener_skipped_section(MemoryRegionSection *section)
242 {
243     return (!memory_region_is_ram(section->mr) &&
244             !memory_region_is_iommu(section->mr)) ||
245            /*
246             * Sizing an enabled 64-bit BAR can cause spurious mappings to
247             * addresses in the upper part of the 64-bit address space.  These
248             * are never accessed by the CPU and beyond the address width of
249             * some IOMMU hardware.  TODO: VFIO should tell us the IOMMU width.
250             */
251            section->offset_within_address_space & (1ULL << 63);
252 }
253 
254 static void vfio_iommu_map_notify(Notifier *n, void *data)
255 {
256     VFIOGuestIOMMU *giommu = container_of(n, VFIOGuestIOMMU, n);
257     VFIOContainer *container = giommu->container;
258     IOMMUTLBEntry *iotlb = data;
259     MemoryRegion *mr;
260     hwaddr xlat;
261     hwaddr len = iotlb->addr_mask + 1;
262     void *vaddr;
263     int ret;
264 
265     trace_vfio_iommu_map_notify(iotlb->iova,
266                                 iotlb->iova + iotlb->addr_mask);
267 
268     /*
269      * The IOMMU TLB entry we have just covers translation through
270      * this IOMMU to its immediate target.  We need to translate
271      * it the rest of the way through to memory.
272      */
273     mr = address_space_translate(&address_space_memory,
274                                  iotlb->translated_addr,
275                                  &xlat, &len, iotlb->perm & IOMMU_WO);
276     if (!memory_region_is_ram(mr)) {
277         error_report("iommu map to non memory area %"HWADDR_PRIx"",
278                      xlat);
279         return;
280     }
281     /*
282      * Translation truncates length to the IOMMU page size,
283      * check that it did not truncate too much.
284      */
285     if (len & iotlb->addr_mask) {
286         error_report("iommu has granularity incompatible with target AS");
287         return;
288     }
289 
290     if ((iotlb->perm & IOMMU_RW) != IOMMU_NONE) {
291         vaddr = memory_region_get_ram_ptr(mr) + xlat;
292         ret = vfio_dma_map(container, iotlb->iova,
293                            iotlb->addr_mask + 1, vaddr,
294                            !(iotlb->perm & IOMMU_WO) || mr->readonly);
295         if (ret) {
296             error_report("vfio_dma_map(%p, 0x%"HWADDR_PRIx", "
297                          "0x%"HWADDR_PRIx", %p) = %d (%m)",
298                          container, iotlb->iova,
299                          iotlb->addr_mask + 1, vaddr, ret);
300         }
301     } else {
302         ret = vfio_dma_unmap(container, iotlb->iova, iotlb->addr_mask + 1);
303         if (ret) {
304             error_report("vfio_dma_unmap(%p, 0x%"HWADDR_PRIx", "
305                          "0x%"HWADDR_PRIx") = %d (%m)",
306                          container, iotlb->iova,
307                          iotlb->addr_mask + 1, ret);
308         }
309     }
310 }
311 
312 static void vfio_listener_region_add(MemoryListener *listener,
313                                      MemoryRegionSection *section)
314 {
315     VFIOContainer *container = container_of(listener, VFIOContainer,
316                                             iommu_data.type1.listener);
317     hwaddr iova, end;
318     Int128 llend;
319     void *vaddr;
320     int ret;
321 
322     if (vfio_listener_skipped_section(section)) {
323         trace_vfio_listener_region_add_skip(
324                 section->offset_within_address_space,
325                 section->offset_within_address_space +
326                 int128_get64(int128_sub(section->size, int128_one())));
327         return;
328     }
329 
330     if (unlikely((section->offset_within_address_space & ~TARGET_PAGE_MASK) !=
331                  (section->offset_within_region & ~TARGET_PAGE_MASK))) {
332         error_report("%s received unaligned region", __func__);
333         return;
334     }
335 
336     iova = TARGET_PAGE_ALIGN(section->offset_within_address_space);
337     llend = int128_make64(section->offset_within_address_space);
338     llend = int128_add(llend, section->size);
339     llend = int128_and(llend, int128_exts64(TARGET_PAGE_MASK));
340 
341     if (int128_ge(int128_make64(iova), llend)) {
342         return;
343     }
344 
345     memory_region_ref(section->mr);
346 
347     if (memory_region_is_iommu(section->mr)) {
348         VFIOGuestIOMMU *giommu;
349 
350         trace_vfio_listener_region_add_iommu(iova,
351                     int128_get64(int128_sub(llend, int128_one())));
352         /*
353          * FIXME: We should do some checking to see if the
354          * capabilities of the host VFIO IOMMU are adequate to model
355          * the guest IOMMU
356          *
357          * FIXME: For VFIO iommu types which have KVM acceleration to
358          * avoid bouncing all map/unmaps through qemu this way, this
359          * would be the right place to wire that up (tell the KVM
360          * device emulation the VFIO iommu handles to use).
361          */
362         /*
363          * This assumes that the guest IOMMU is empty of
364          * mappings at this point.
365          *
366          * One way of doing this is:
367          * 1. Avoid sharing IOMMUs between emulated devices or different
368          * IOMMU groups.
369          * 2. Implement VFIO_IOMMU_ENABLE in the host kernel to fail if
370          * there are some mappings in IOMMU.
371          *
372          * VFIO on SPAPR does that. Other IOMMU models may do that different,
373          * they must make sure there are no existing mappings or
374          * loop through existing mappings to map them into VFIO.
375          */
376         giommu = g_malloc0(sizeof(*giommu));
377         giommu->iommu = section->mr;
378         giommu->container = container;
379         giommu->n.notify = vfio_iommu_map_notify;
380         QLIST_INSERT_HEAD(&container->giommu_list, giommu, giommu_next);
381         memory_region_register_iommu_notifier(giommu->iommu, &giommu->n);
382 
383         return;
384     }
385 
386     /* Here we assume that memory_region_is_ram(section->mr)==true */
387 
388     end = int128_get64(llend);
389     vaddr = memory_region_get_ram_ptr(section->mr) +
390             section->offset_within_region +
391             (iova - section->offset_within_address_space);
392 
393     trace_vfio_listener_region_add_ram(iova, end - 1, vaddr);
394 
395     ret = vfio_dma_map(container, iova, end - iova, vaddr, section->readonly);
396     if (ret) {
397         error_report("vfio_dma_map(%p, 0x%"HWADDR_PRIx", "
398                      "0x%"HWADDR_PRIx", %p) = %d (%m)",
399                      container, iova, end - iova, vaddr, ret);
400 
401         /*
402          * On the initfn path, store the first error in the container so we
403          * can gracefully fail.  Runtime, there's not much we can do other
404          * than throw a hardware error.
405          */
406         if (!container->iommu_data.type1.initialized) {
407             if (!container->iommu_data.type1.error) {
408                 container->iommu_data.type1.error = ret;
409             }
410         } else {
411             hw_error("vfio: DMA mapping failed, unable to continue");
412         }
413     }
414 }
415 
416 static void vfio_listener_region_del(MemoryListener *listener,
417                                      MemoryRegionSection *section)
418 {
419     VFIOContainer *container = container_of(listener, VFIOContainer,
420                                             iommu_data.type1.listener);
421     hwaddr iova, end;
422     int ret;
423 
424     if (vfio_listener_skipped_section(section)) {
425         trace_vfio_listener_region_del_skip(
426                 section->offset_within_address_space,
427                 section->offset_within_address_space +
428                 int128_get64(int128_sub(section->size, int128_one())));
429         return;
430     }
431 
432     if (unlikely((section->offset_within_address_space & ~TARGET_PAGE_MASK) !=
433                  (section->offset_within_region & ~TARGET_PAGE_MASK))) {
434         error_report("%s received unaligned region", __func__);
435         return;
436     }
437 
438     if (memory_region_is_iommu(section->mr)) {
439         VFIOGuestIOMMU *giommu;
440 
441         QLIST_FOREACH(giommu, &container->giommu_list, giommu_next) {
442             if (giommu->iommu == section->mr) {
443                 memory_region_unregister_iommu_notifier(&giommu->n);
444                 QLIST_REMOVE(giommu, giommu_next);
445                 g_free(giommu);
446                 break;
447             }
448         }
449 
450         /*
451          * FIXME: We assume the one big unmap below is adequate to
452          * remove any individual page mappings in the IOMMU which
453          * might have been copied into VFIO. This works for a page table
454          * based IOMMU where a big unmap flattens a large range of IO-PTEs.
455          * That may not be true for all IOMMU types.
456          */
457     }
458 
459     iova = TARGET_PAGE_ALIGN(section->offset_within_address_space);
460     end = (section->offset_within_address_space + int128_get64(section->size)) &
461           TARGET_PAGE_MASK;
462 
463     if (iova >= end) {
464         return;
465     }
466 
467     trace_vfio_listener_region_del(iova, end - 1);
468 
469     ret = vfio_dma_unmap(container, iova, end - iova);
470     memory_region_unref(section->mr);
471     if (ret) {
472         error_report("vfio_dma_unmap(%p, 0x%"HWADDR_PRIx", "
473                      "0x%"HWADDR_PRIx") = %d (%m)",
474                      container, iova, end - iova, ret);
475     }
476 }
477 
478 static const MemoryListener vfio_memory_listener = {
479     .region_add = vfio_listener_region_add,
480     .region_del = vfio_listener_region_del,
481 };
482 
483 static void vfio_listener_release(VFIOContainer *container)
484 {
485     memory_listener_unregister(&container->iommu_data.type1.listener);
486 }
487 
488 int vfio_mmap_region(Object *obj, VFIORegion *region,
489                      MemoryRegion *mem, MemoryRegion *submem,
490                      void **map, size_t size, off_t offset,
491                      const char *name)
492 {
493     int ret = 0;
494     VFIODevice *vbasedev = region->vbasedev;
495 
496     if (vbasedev->allow_mmap && size && region->flags &
497         VFIO_REGION_INFO_FLAG_MMAP) {
498         int prot = 0;
499 
500         if (region->flags & VFIO_REGION_INFO_FLAG_READ) {
501             prot |= PROT_READ;
502         }
503 
504         if (region->flags & VFIO_REGION_INFO_FLAG_WRITE) {
505             prot |= PROT_WRITE;
506         }
507 
508         *map = mmap(NULL, size, prot, MAP_SHARED,
509                     vbasedev->fd,
510                     region->fd_offset + offset);
511         if (*map == MAP_FAILED) {
512             *map = NULL;
513             ret = -errno;
514             goto empty_region;
515         }
516 
517         memory_region_init_ram_ptr(submem, obj, name, size, *map);
518         memory_region_set_skip_dump(submem);
519     } else {
520 empty_region:
521         /* Create a zero sized sub-region to make cleanup easy. */
522         memory_region_init(submem, obj, name, 0);
523     }
524 
525     memory_region_add_subregion(mem, offset, submem);
526 
527     return ret;
528 }
529 
530 void vfio_reset_handler(void *opaque)
531 {
532     VFIOGroup *group;
533     VFIODevice *vbasedev;
534 
535     QLIST_FOREACH(group, &vfio_group_list, next) {
536         QLIST_FOREACH(vbasedev, &group->device_list, next) {
537             vbasedev->ops->vfio_compute_needs_reset(vbasedev);
538         }
539     }
540 
541     QLIST_FOREACH(group, &vfio_group_list, next) {
542         QLIST_FOREACH(vbasedev, &group->device_list, next) {
543             if (vbasedev->needs_reset) {
544                 vbasedev->ops->vfio_hot_reset_multi(vbasedev);
545             }
546         }
547     }
548 }
549 
550 static void vfio_kvm_device_add_group(VFIOGroup *group)
551 {
552 #ifdef CONFIG_KVM
553     struct kvm_device_attr attr = {
554         .group = KVM_DEV_VFIO_GROUP,
555         .attr = KVM_DEV_VFIO_GROUP_ADD,
556         .addr = (uint64_t)(unsigned long)&group->fd,
557     };
558 
559     if (!kvm_enabled()) {
560         return;
561     }
562 
563     if (vfio_kvm_device_fd < 0) {
564         struct kvm_create_device cd = {
565             .type = KVM_DEV_TYPE_VFIO,
566         };
567 
568         if (kvm_vm_ioctl(kvm_state, KVM_CREATE_DEVICE, &cd)) {
569             error_report("Failed to create KVM VFIO device: %m");
570             return;
571         }
572 
573         vfio_kvm_device_fd = cd.fd;
574     }
575 
576     if (ioctl(vfio_kvm_device_fd, KVM_SET_DEVICE_ATTR, &attr)) {
577         error_report("Failed to add group %d to KVM VFIO device: %m",
578                      group->groupid);
579     }
580 #endif
581 }
582 
583 static void vfio_kvm_device_del_group(VFIOGroup *group)
584 {
585 #ifdef CONFIG_KVM
586     struct kvm_device_attr attr = {
587         .group = KVM_DEV_VFIO_GROUP,
588         .attr = KVM_DEV_VFIO_GROUP_DEL,
589         .addr = (uint64_t)(unsigned long)&group->fd,
590     };
591 
592     if (vfio_kvm_device_fd < 0) {
593         return;
594     }
595 
596     if (ioctl(vfio_kvm_device_fd, KVM_SET_DEVICE_ATTR, &attr)) {
597         error_report("Failed to remove group %d from KVM VFIO device: %m",
598                      group->groupid);
599     }
600 #endif
601 }
602 
603 static VFIOAddressSpace *vfio_get_address_space(AddressSpace *as)
604 {
605     VFIOAddressSpace *space;
606 
607     QLIST_FOREACH(space, &vfio_address_spaces, list) {
608         if (space->as == as) {
609             return space;
610         }
611     }
612 
613     /* No suitable VFIOAddressSpace, create a new one */
614     space = g_malloc0(sizeof(*space));
615     space->as = as;
616     QLIST_INIT(&space->containers);
617 
618     QLIST_INSERT_HEAD(&vfio_address_spaces, space, list);
619 
620     return space;
621 }
622 
623 static void vfio_put_address_space(VFIOAddressSpace *space)
624 {
625     if (QLIST_EMPTY(&space->containers)) {
626         QLIST_REMOVE(space, list);
627         g_free(space);
628     }
629 }
630 
631 static int vfio_connect_container(VFIOGroup *group, AddressSpace *as)
632 {
633     VFIOContainer *container;
634     int ret, fd;
635     VFIOAddressSpace *space;
636 
637     space = vfio_get_address_space(as);
638 
639     QLIST_FOREACH(container, &space->containers, next) {
640         if (!ioctl(group->fd, VFIO_GROUP_SET_CONTAINER, &container->fd)) {
641             group->container = container;
642             QLIST_INSERT_HEAD(&container->group_list, group, container_next);
643             return 0;
644         }
645     }
646 
647     fd = qemu_open("/dev/vfio/vfio", O_RDWR);
648     if (fd < 0) {
649         error_report("vfio: failed to open /dev/vfio/vfio: %m");
650         ret = -errno;
651         goto put_space_exit;
652     }
653 
654     ret = ioctl(fd, VFIO_GET_API_VERSION);
655     if (ret != VFIO_API_VERSION) {
656         error_report("vfio: supported vfio version: %d, "
657                      "reported version: %d", VFIO_API_VERSION, ret);
658         ret = -EINVAL;
659         goto close_fd_exit;
660     }
661 
662     container = g_malloc0(sizeof(*container));
663     container->space = space;
664     container->fd = fd;
665     if (ioctl(fd, VFIO_CHECK_EXTENSION, VFIO_TYPE1_IOMMU) ||
666         ioctl(fd, VFIO_CHECK_EXTENSION, VFIO_TYPE1v2_IOMMU)) {
667         bool v2 = !!ioctl(fd, VFIO_CHECK_EXTENSION, VFIO_TYPE1v2_IOMMU);
668 
669         ret = ioctl(group->fd, VFIO_GROUP_SET_CONTAINER, &fd);
670         if (ret) {
671             error_report("vfio: failed to set group container: %m");
672             ret = -errno;
673             goto free_container_exit;
674         }
675 
676         ret = ioctl(fd, VFIO_SET_IOMMU,
677                     v2 ? VFIO_TYPE1v2_IOMMU : VFIO_TYPE1_IOMMU);
678         if (ret) {
679             error_report("vfio: failed to set iommu for container: %m");
680             ret = -errno;
681             goto free_container_exit;
682         }
683 
684         container->iommu_data.type1.listener = vfio_memory_listener;
685         container->iommu_data.release = vfio_listener_release;
686 
687         memory_listener_register(&container->iommu_data.type1.listener,
688                                  container->space->as);
689 
690         if (container->iommu_data.type1.error) {
691             ret = container->iommu_data.type1.error;
692             error_report("vfio: memory listener initialization failed for container");
693             goto listener_release_exit;
694         }
695 
696         container->iommu_data.type1.initialized = true;
697 
698     } else if (ioctl(fd, VFIO_CHECK_EXTENSION, VFIO_SPAPR_TCE_IOMMU)) {
699         ret = ioctl(group->fd, VFIO_GROUP_SET_CONTAINER, &fd);
700         if (ret) {
701             error_report("vfio: failed to set group container: %m");
702             ret = -errno;
703             goto free_container_exit;
704         }
705         ret = ioctl(fd, VFIO_SET_IOMMU, VFIO_SPAPR_TCE_IOMMU);
706         if (ret) {
707             error_report("vfio: failed to set iommu for container: %m");
708             ret = -errno;
709             goto free_container_exit;
710         }
711 
712         /*
713          * The host kernel code implementing VFIO_IOMMU_DISABLE is called
714          * when container fd is closed so we do not call it explicitly
715          * in this file.
716          */
717         ret = ioctl(fd, VFIO_IOMMU_ENABLE);
718         if (ret) {
719             error_report("vfio: failed to enable container: %m");
720             ret = -errno;
721             goto free_container_exit;
722         }
723 
724         container->iommu_data.type1.listener = vfio_memory_listener;
725         container->iommu_data.release = vfio_listener_release;
726 
727         memory_listener_register(&container->iommu_data.type1.listener,
728                                  container->space->as);
729 
730     } else {
731         error_report("vfio: No available IOMMU models");
732         ret = -EINVAL;
733         goto free_container_exit;
734     }
735 
736     QLIST_INIT(&container->group_list);
737     QLIST_INSERT_HEAD(&space->containers, container, next);
738 
739     group->container = container;
740     QLIST_INSERT_HEAD(&container->group_list, group, container_next);
741 
742     return 0;
743 listener_release_exit:
744     vfio_listener_release(container);
745 
746 free_container_exit:
747     g_free(container);
748 
749 close_fd_exit:
750     close(fd);
751 
752 put_space_exit:
753     vfio_put_address_space(space);
754 
755     return ret;
756 }
757 
758 static void vfio_disconnect_container(VFIOGroup *group)
759 {
760     VFIOContainer *container = group->container;
761 
762     if (ioctl(group->fd, VFIO_GROUP_UNSET_CONTAINER, &container->fd)) {
763         error_report("vfio: error disconnecting group %d from container",
764                      group->groupid);
765     }
766 
767     QLIST_REMOVE(group, container_next);
768     group->container = NULL;
769 
770     if (QLIST_EMPTY(&container->group_list)) {
771         VFIOAddressSpace *space = container->space;
772 
773         if (container->iommu_data.release) {
774             container->iommu_data.release(container);
775         }
776         QLIST_REMOVE(container, next);
777         trace_vfio_disconnect_container(container->fd);
778         close(container->fd);
779         g_free(container);
780 
781         vfio_put_address_space(space);
782     }
783 }
784 
785 VFIOGroup *vfio_get_group(int groupid, AddressSpace *as)
786 {
787     VFIOGroup *group;
788     char path[32];
789     struct vfio_group_status status = { .argsz = sizeof(status) };
790 
791     QLIST_FOREACH(group, &vfio_group_list, next) {
792         if (group->groupid == groupid) {
793             /* Found it.  Now is it already in the right context? */
794             if (group->container->space->as == as) {
795                 return group;
796             } else {
797                 error_report("vfio: group %d used in multiple address spaces",
798                              group->groupid);
799                 return NULL;
800             }
801         }
802     }
803 
804     group = g_malloc0(sizeof(*group));
805 
806     snprintf(path, sizeof(path), "/dev/vfio/%d", groupid);
807     group->fd = qemu_open(path, O_RDWR);
808     if (group->fd < 0) {
809         error_report("vfio: error opening %s: %m", path);
810         goto free_group_exit;
811     }
812 
813     if (ioctl(group->fd, VFIO_GROUP_GET_STATUS, &status)) {
814         error_report("vfio: error getting group status: %m");
815         goto close_fd_exit;
816     }
817 
818     if (!(status.flags & VFIO_GROUP_FLAGS_VIABLE)) {
819         error_report("vfio: error, group %d is not viable, please ensure "
820                      "all devices within the iommu_group are bound to their "
821                      "vfio bus driver.", groupid);
822         goto close_fd_exit;
823     }
824 
825     group->groupid = groupid;
826     QLIST_INIT(&group->device_list);
827 
828     if (vfio_connect_container(group, as)) {
829         error_report("vfio: failed to setup container for group %d", groupid);
830         goto close_fd_exit;
831     }
832 
833     if (QLIST_EMPTY(&vfio_group_list)) {
834         qemu_register_reset(vfio_reset_handler, NULL);
835     }
836 
837     QLIST_INSERT_HEAD(&vfio_group_list, group, next);
838 
839     vfio_kvm_device_add_group(group);
840 
841     return group;
842 
843 close_fd_exit:
844     close(group->fd);
845 
846 free_group_exit:
847     g_free(group);
848 
849     return NULL;
850 }
851 
852 void vfio_put_group(VFIOGroup *group)
853 {
854     if (!group || !QLIST_EMPTY(&group->device_list)) {
855         return;
856     }
857 
858     vfio_kvm_device_del_group(group);
859     vfio_disconnect_container(group);
860     QLIST_REMOVE(group, next);
861     trace_vfio_put_group(group->fd);
862     close(group->fd);
863     g_free(group);
864 
865     if (QLIST_EMPTY(&vfio_group_list)) {
866         qemu_unregister_reset(vfio_reset_handler, NULL);
867     }
868 }
869 
870 int vfio_get_device(VFIOGroup *group, const char *name,
871                        VFIODevice *vbasedev)
872 {
873     struct vfio_device_info dev_info = { .argsz = sizeof(dev_info) };
874     int ret, fd;
875 
876     fd = ioctl(group->fd, VFIO_GROUP_GET_DEVICE_FD, name);
877     if (fd < 0) {
878         error_report("vfio: error getting device %s from group %d: %m",
879                      name, group->groupid);
880         error_printf("Verify all devices in group %d are bound to vfio-<bus> "
881                      "or pci-stub and not already in use\n", group->groupid);
882         return fd;
883     }
884 
885     ret = ioctl(fd, VFIO_DEVICE_GET_INFO, &dev_info);
886     if (ret) {
887         error_report("vfio: error getting device info: %m");
888         close(fd);
889         return ret;
890     }
891 
892     vbasedev->fd = fd;
893     vbasedev->group = group;
894     QLIST_INSERT_HEAD(&group->device_list, vbasedev, next);
895 
896     vbasedev->num_irqs = dev_info.num_irqs;
897     vbasedev->num_regions = dev_info.num_regions;
898     vbasedev->flags = dev_info.flags;
899 
900     trace_vfio_get_device(name, dev_info.flags, dev_info.num_regions,
901                           dev_info.num_irqs);
902 
903     vbasedev->reset_works = !!(dev_info.flags & VFIO_DEVICE_FLAGS_RESET);
904     return 0;
905 }
906 
907 void vfio_put_base_device(VFIODevice *vbasedev)
908 {
909     if (!vbasedev->group) {
910         return;
911     }
912     QLIST_REMOVE(vbasedev, next);
913     vbasedev->group = NULL;
914     trace_vfio_put_base_device(vbasedev->fd);
915     close(vbasedev->fd);
916 }
917 
918 static int vfio_container_do_ioctl(AddressSpace *as, int32_t groupid,
919                                    int req, void *param)
920 {
921     VFIOGroup *group;
922     VFIOContainer *container;
923     int ret = -1;
924 
925     group = vfio_get_group(groupid, as);
926     if (!group) {
927         error_report("vfio: group %d not registered", groupid);
928         return ret;
929     }
930 
931     container = group->container;
932     if (group->container) {
933         ret = ioctl(container->fd, req, param);
934         if (ret < 0) {
935             error_report("vfio: failed to ioctl %d to container: ret=%d, %s",
936                          _IOC_NR(req) - VFIO_BASE, ret, strerror(errno));
937         }
938     }
939 
940     vfio_put_group(group);
941 
942     return ret;
943 }
944 
945 int vfio_container_ioctl(AddressSpace *as, int32_t groupid,
946                          int req, void *param)
947 {
948     /* We allow only certain ioctls to the container */
949     switch (req) {
950     case VFIO_CHECK_EXTENSION:
951     case VFIO_IOMMU_SPAPR_TCE_GET_INFO:
952     case VFIO_EEH_PE_OP:
953         break;
954     default:
955         /* Return an error on unknown requests */
956         error_report("vfio: unsupported ioctl %X", req);
957         return -1;
958     }
959 
960     return vfio_container_do_ioctl(as, groupid, req, param);
961 }
962