1 /* 2 * USB redirector usb-guest 3 * 4 * Copyright (c) 2011-2012 Red Hat, Inc. 5 * 6 * Red Hat Authors: 7 * Hans de Goede <hdegoede@redhat.com> 8 * 9 * Permission is hereby granted, free of charge, to any person obtaining a copy 10 * of this software and associated documentation files (the "Software"), to deal 11 * in the Software without restriction, including without limitation the rights 12 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 13 * copies of the Software, and to permit persons to whom the Software is 14 * furnished to do so, subject to the following conditions: 15 * 16 * The above copyright notice and this permission notice shall be included in 17 * all copies or substantial portions of the Software. 18 * 19 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 20 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 21 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 22 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 23 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 24 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 25 * THE SOFTWARE. 26 */ 27 28 #include "qemu/osdep.h" 29 #include "qemu-common.h" 30 #include "qemu/units.h" 31 #include "qapi/error.h" 32 #include "qemu/timer.h" 33 #include "sysemu/runstate.h" 34 #include "sysemu/sysemu.h" 35 #include "qapi/qmp/qerror.h" 36 #include "qemu/error-report.h" 37 #include "qemu/iov.h" 38 #include "qemu/module.h" 39 #include "chardev/char-fe.h" 40 41 #include <usbredirparser.h> 42 #include <usbredirfilter.h> 43 44 #include "hw/qdev-properties.h" 45 #include "hw/qdev-properties-system.h" 46 #include "hw/usb.h" 47 #include "migration/qemu-file-types.h" 48 #include "migration/vmstate.h" 49 #include "qom/object.h" 50 51 /* ERROR is defined below. Remove any previous definition. */ 52 #undef ERROR 53 54 #define MAX_ENDPOINTS 32 55 #define NO_INTERFACE_INFO 255 /* Valid interface_count always <= 32 */ 56 #define EP2I(ep_address) (((ep_address & 0x80) >> 3) | (ep_address & 0x0f)) 57 #define I2EP(i) (((i & 0x10) << 3) | (i & 0x0f)) 58 #define USBEP2I(usb_ep) (((usb_ep)->pid == USB_TOKEN_IN) ? \ 59 ((usb_ep)->nr | 0x10) : ((usb_ep)->nr)) 60 #define I2USBEP(d, i) (usb_ep_get(&(d)->dev, \ 61 ((i) & 0x10) ? USB_TOKEN_IN : USB_TOKEN_OUT, \ 62 (i) & 0x0f)) 63 64 #ifndef USBREDIR_VERSION /* This is not defined in older usbredir versions */ 65 #define USBREDIR_VERSION 0 66 #endif 67 68 typedef struct USBRedirDevice USBRedirDevice; 69 70 /* Struct to hold buffered packets */ 71 struct buf_packet { 72 uint8_t *data; 73 void *free_on_destroy; 74 uint16_t len; 75 uint16_t offset; 76 uint8_t status; 77 QTAILQ_ENTRY(buf_packet)next; 78 }; 79 80 struct endp_data { 81 USBRedirDevice *dev; 82 uint8_t type; 83 uint8_t interval; 84 uint8_t interface; /* bInterfaceNumber this ep belongs to */ 85 uint16_t max_packet_size; /* In bytes, not wMaxPacketSize format !! */ 86 uint32_t max_streams; 87 uint8_t iso_started; 88 uint8_t iso_error; /* For reporting iso errors to the HC */ 89 uint8_t interrupt_started; 90 uint8_t interrupt_error; 91 uint8_t bulk_receiving_enabled; 92 uint8_t bulk_receiving_started; 93 uint8_t bufpq_prefilled; 94 uint8_t bufpq_dropping_packets; 95 QTAILQ_HEAD(, buf_packet) bufpq; 96 int32_t bufpq_size; 97 int32_t bufpq_target_size; 98 USBPacket *pending_async_packet; 99 }; 100 101 struct PacketIdQueueEntry { 102 uint64_t id; 103 QTAILQ_ENTRY(PacketIdQueueEntry)next; 104 }; 105 106 struct PacketIdQueue { 107 USBRedirDevice *dev; 108 const char *name; 109 QTAILQ_HEAD(, PacketIdQueueEntry) head; 110 int size; 111 }; 112 113 struct USBRedirDevice { 114 USBDevice dev; 115 /* Properties */ 116 CharBackend cs; 117 bool enable_streams; 118 bool suppress_remote_wake; 119 bool in_write; 120 uint8_t debug; 121 int32_t bootindex; 122 char *filter_str; 123 /* Data passed from chardev the fd_read cb to the usbredirparser read cb */ 124 const uint8_t *read_buf; 125 int read_buf_size; 126 /* Active chardev-watch-tag */ 127 guint watch; 128 /* For async handling of close / reject */ 129 QEMUBH *chardev_close_bh; 130 QEMUBH *device_reject_bh; 131 /* To delay the usb attach in case of quick chardev close + open */ 132 QEMUTimer *attach_timer; 133 int64_t next_attach_time; 134 struct usbredirparser *parser; 135 struct endp_data endpoint[MAX_ENDPOINTS]; 136 struct PacketIdQueue cancelled; 137 struct PacketIdQueue already_in_flight; 138 void (*buffered_bulk_in_complete)(USBRedirDevice *, USBPacket *, uint8_t); 139 /* Data for device filtering */ 140 struct usb_redir_device_connect_header device_info; 141 struct usb_redir_interface_info_header interface_info; 142 struct usbredirfilter_rule *filter_rules; 143 int filter_rules_count; 144 int compatible_speedmask; 145 VMChangeStateEntry *vmstate; 146 }; 147 148 #define TYPE_USB_REDIR "usb-redir" 149 DECLARE_INSTANCE_CHECKER(USBRedirDevice, USB_REDIRECT, 150 TYPE_USB_REDIR) 151 152 static void usbredir_hello(void *priv, struct usb_redir_hello_header *h); 153 static void usbredir_device_connect(void *priv, 154 struct usb_redir_device_connect_header *device_connect); 155 static void usbredir_device_disconnect(void *priv); 156 static void usbredir_interface_info(void *priv, 157 struct usb_redir_interface_info_header *interface_info); 158 static void usbredir_ep_info(void *priv, 159 struct usb_redir_ep_info_header *ep_info); 160 static void usbredir_configuration_status(void *priv, uint64_t id, 161 struct usb_redir_configuration_status_header *configuration_status); 162 static void usbredir_alt_setting_status(void *priv, uint64_t id, 163 struct usb_redir_alt_setting_status_header *alt_setting_status); 164 static void usbredir_iso_stream_status(void *priv, uint64_t id, 165 struct usb_redir_iso_stream_status_header *iso_stream_status); 166 static void usbredir_interrupt_receiving_status(void *priv, uint64_t id, 167 struct usb_redir_interrupt_receiving_status_header 168 *interrupt_receiving_status); 169 static void usbredir_bulk_streams_status(void *priv, uint64_t id, 170 struct usb_redir_bulk_streams_status_header *bulk_streams_status); 171 static void usbredir_bulk_receiving_status(void *priv, uint64_t id, 172 struct usb_redir_bulk_receiving_status_header *bulk_receiving_status); 173 static void usbredir_control_packet(void *priv, uint64_t id, 174 struct usb_redir_control_packet_header *control_packet, 175 uint8_t *data, int data_len); 176 static void usbredir_bulk_packet(void *priv, uint64_t id, 177 struct usb_redir_bulk_packet_header *bulk_packet, 178 uint8_t *data, int data_len); 179 static void usbredir_iso_packet(void *priv, uint64_t id, 180 struct usb_redir_iso_packet_header *iso_packet, 181 uint8_t *data, int data_len); 182 static void usbredir_interrupt_packet(void *priv, uint64_t id, 183 struct usb_redir_interrupt_packet_header *interrupt_header, 184 uint8_t *data, int data_len); 185 static void usbredir_buffered_bulk_packet(void *priv, uint64_t id, 186 struct usb_redir_buffered_bulk_packet_header *buffered_bulk_packet, 187 uint8_t *data, int data_len); 188 189 static void usbredir_handle_status(USBRedirDevice *dev, USBPacket *p, 190 int status); 191 192 #define VERSION "qemu usb-redir guest " QEMU_VERSION 193 194 /* 195 * Logging stuff 196 */ 197 198 #define ERROR(...) \ 199 do { \ 200 if (dev->debug >= usbredirparser_error) { \ 201 error_report("usb-redir error: " __VA_ARGS__); \ 202 } \ 203 } while (0) 204 #define WARNING(...) \ 205 do { \ 206 if (dev->debug >= usbredirparser_warning) { \ 207 warn_report("" __VA_ARGS__); \ 208 } \ 209 } while (0) 210 #define INFO(...) \ 211 do { \ 212 if (dev->debug >= usbredirparser_info) { \ 213 error_report("usb-redir: " __VA_ARGS__); \ 214 } \ 215 } while (0) 216 #define DPRINTF(...) \ 217 do { \ 218 if (dev->debug >= usbredirparser_debug) { \ 219 error_report("usb-redir: " __VA_ARGS__); \ 220 } \ 221 } while (0) 222 #define DPRINTF2(...) \ 223 do { \ 224 if (dev->debug >= usbredirparser_debug_data) { \ 225 error_report("usb-redir: " __VA_ARGS__); \ 226 } \ 227 } while (0) 228 229 static void usbredir_log(void *priv, int level, const char *msg) 230 { 231 USBRedirDevice *dev = priv; 232 233 if (dev->debug < level) { 234 return; 235 } 236 237 error_report("%s", msg); 238 } 239 240 static void usbredir_log_data(USBRedirDevice *dev, const char *desc, 241 const uint8_t *data, int len) 242 { 243 if (dev->debug < usbredirparser_debug_data) { 244 return; 245 } 246 qemu_hexdump(stderr, desc, data, len); 247 } 248 249 /* 250 * usbredirparser io functions 251 */ 252 253 static int usbredir_read(void *priv, uint8_t *data, int count) 254 { 255 USBRedirDevice *dev = priv; 256 257 if (dev->read_buf_size < count) { 258 count = dev->read_buf_size; 259 } 260 261 memcpy(data, dev->read_buf, count); 262 263 dev->read_buf_size -= count; 264 if (dev->read_buf_size) { 265 dev->read_buf += count; 266 } else { 267 dev->read_buf = NULL; 268 } 269 270 return count; 271 } 272 273 static gboolean usbredir_write_unblocked(GIOChannel *chan, GIOCondition cond, 274 void *opaque) 275 { 276 USBRedirDevice *dev = opaque; 277 278 dev->watch = 0; 279 usbredirparser_do_write(dev->parser); 280 281 return FALSE; 282 } 283 284 static int usbredir_write(void *priv, uint8_t *data, int count) 285 { 286 USBRedirDevice *dev = priv; 287 int r; 288 289 if (!qemu_chr_fe_backend_open(&dev->cs)) { 290 return 0; 291 } 292 293 /* Don't send new data to the chardev until our state is fully synced */ 294 if (!runstate_check(RUN_STATE_RUNNING)) { 295 return 0; 296 } 297 298 /* Recursion check */ 299 if (dev->in_write) { 300 DPRINTF("usbredir_write recursion\n"); 301 return 0; 302 } 303 dev->in_write = true; 304 305 r = qemu_chr_fe_write(&dev->cs, data, count); 306 if (r < count) { 307 if (!dev->watch) { 308 dev->watch = qemu_chr_fe_add_watch(&dev->cs, G_IO_OUT | G_IO_HUP, 309 usbredir_write_unblocked, dev); 310 } 311 if (r < 0) { 312 r = 0; 313 } 314 } 315 dev->in_write = false; 316 return r; 317 } 318 319 /* 320 * Cancelled and buffered packets helpers 321 */ 322 323 static void packet_id_queue_init(struct PacketIdQueue *q, 324 USBRedirDevice *dev, const char *name) 325 { 326 q->dev = dev; 327 q->name = name; 328 QTAILQ_INIT(&q->head); 329 q->size = 0; 330 } 331 332 static void packet_id_queue_add(struct PacketIdQueue *q, uint64_t id) 333 { 334 USBRedirDevice *dev = q->dev; 335 struct PacketIdQueueEntry *e; 336 337 DPRINTF("adding packet id %"PRIu64" to %s queue\n", id, q->name); 338 339 e = g_new0(struct PacketIdQueueEntry, 1); 340 e->id = id; 341 QTAILQ_INSERT_TAIL(&q->head, e, next); 342 q->size++; 343 } 344 345 static int packet_id_queue_remove(struct PacketIdQueue *q, uint64_t id) 346 { 347 USBRedirDevice *dev = q->dev; 348 struct PacketIdQueueEntry *e; 349 350 QTAILQ_FOREACH(e, &q->head, next) { 351 if (e->id == id) { 352 DPRINTF("removing packet id %"PRIu64" from %s queue\n", 353 id, q->name); 354 QTAILQ_REMOVE(&q->head, e, next); 355 q->size--; 356 g_free(e); 357 return 1; 358 } 359 } 360 return 0; 361 } 362 363 static void packet_id_queue_empty(struct PacketIdQueue *q) 364 { 365 USBRedirDevice *dev = q->dev; 366 struct PacketIdQueueEntry *e, *next_e; 367 368 DPRINTF("removing %d packet-ids from %s queue\n", q->size, q->name); 369 370 QTAILQ_FOREACH_SAFE(e, &q->head, next, next_e) { 371 QTAILQ_REMOVE(&q->head, e, next); 372 g_free(e); 373 } 374 q->size = 0; 375 } 376 377 static void usbredir_cancel_packet(USBDevice *udev, USBPacket *p) 378 { 379 USBRedirDevice *dev = USB_REDIRECT(udev); 380 int i = USBEP2I(p->ep); 381 382 if (p->combined) { 383 usb_combined_packet_cancel(udev, p); 384 return; 385 } 386 387 if (dev->endpoint[i].pending_async_packet) { 388 assert(dev->endpoint[i].pending_async_packet == p); 389 dev->endpoint[i].pending_async_packet = NULL; 390 return; 391 } 392 393 packet_id_queue_add(&dev->cancelled, p->id); 394 usbredirparser_send_cancel_data_packet(dev->parser, p->id); 395 usbredirparser_do_write(dev->parser); 396 } 397 398 static int usbredir_is_cancelled(USBRedirDevice *dev, uint64_t id) 399 { 400 if (!dev->dev.attached) { 401 return 1; /* Treat everything as cancelled after a disconnect */ 402 } 403 return packet_id_queue_remove(&dev->cancelled, id); 404 } 405 406 static void usbredir_fill_already_in_flight_from_ep(USBRedirDevice *dev, 407 struct USBEndpoint *ep) 408 { 409 static USBPacket *p; 410 411 /* async handled packets for bulk receiving eps do not count as inflight */ 412 if (dev->endpoint[USBEP2I(ep)].bulk_receiving_started) { 413 return; 414 } 415 416 QTAILQ_FOREACH(p, &ep->queue, queue) { 417 /* Skip combined packets, except for the first */ 418 if (p->combined && p != p->combined->first) { 419 continue; 420 } 421 if (p->state == USB_PACKET_ASYNC) { 422 packet_id_queue_add(&dev->already_in_flight, p->id); 423 } 424 } 425 } 426 427 static void usbredir_fill_already_in_flight(USBRedirDevice *dev) 428 { 429 int ep; 430 struct USBDevice *udev = &dev->dev; 431 432 usbredir_fill_already_in_flight_from_ep(dev, &udev->ep_ctl); 433 434 for (ep = 0; ep < USB_MAX_ENDPOINTS; ep++) { 435 usbredir_fill_already_in_flight_from_ep(dev, &udev->ep_in[ep]); 436 usbredir_fill_already_in_flight_from_ep(dev, &udev->ep_out[ep]); 437 } 438 } 439 440 static int usbredir_already_in_flight(USBRedirDevice *dev, uint64_t id) 441 { 442 return packet_id_queue_remove(&dev->already_in_flight, id); 443 } 444 445 static USBPacket *usbredir_find_packet_by_id(USBRedirDevice *dev, 446 uint8_t ep, uint64_t id) 447 { 448 USBPacket *p; 449 450 if (usbredir_is_cancelled(dev, id)) { 451 return NULL; 452 } 453 454 p = usb_ep_find_packet_by_id(&dev->dev, 455 (ep & USB_DIR_IN) ? USB_TOKEN_IN : USB_TOKEN_OUT, 456 ep & 0x0f, id); 457 if (p == NULL) { 458 ERROR("could not find packet with id %"PRIu64"\n", id); 459 } 460 return p; 461 } 462 463 static int bufp_alloc(USBRedirDevice *dev, uint8_t *data, uint16_t len, 464 uint8_t status, uint8_t ep, void *free_on_destroy) 465 { 466 struct buf_packet *bufp; 467 468 if (!dev->endpoint[EP2I(ep)].bufpq_dropping_packets && 469 dev->endpoint[EP2I(ep)].bufpq_size > 470 2 * dev->endpoint[EP2I(ep)].bufpq_target_size) { 471 DPRINTF("bufpq overflow, dropping packets ep %02X\n", ep); 472 dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 1; 473 } 474 /* Since we're interupting the stream anyways, drop enough packets to get 475 back to our target buffer size */ 476 if (dev->endpoint[EP2I(ep)].bufpq_dropping_packets) { 477 if (dev->endpoint[EP2I(ep)].bufpq_size > 478 dev->endpoint[EP2I(ep)].bufpq_target_size) { 479 free(data); 480 return -1; 481 } 482 dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0; 483 } 484 485 bufp = g_new(struct buf_packet, 1); 486 bufp->data = data; 487 bufp->len = len; 488 bufp->offset = 0; 489 bufp->status = status; 490 bufp->free_on_destroy = free_on_destroy; 491 QTAILQ_INSERT_TAIL(&dev->endpoint[EP2I(ep)].bufpq, bufp, next); 492 dev->endpoint[EP2I(ep)].bufpq_size++; 493 return 0; 494 } 495 496 static void bufp_free(USBRedirDevice *dev, struct buf_packet *bufp, 497 uint8_t ep) 498 { 499 QTAILQ_REMOVE(&dev->endpoint[EP2I(ep)].bufpq, bufp, next); 500 dev->endpoint[EP2I(ep)].bufpq_size--; 501 free(bufp->free_on_destroy); 502 g_free(bufp); 503 } 504 505 static void usbredir_free_bufpq(USBRedirDevice *dev, uint8_t ep) 506 { 507 struct buf_packet *buf, *buf_next; 508 509 QTAILQ_FOREACH_SAFE(buf, &dev->endpoint[EP2I(ep)].bufpq, next, buf_next) { 510 bufp_free(dev, buf, ep); 511 } 512 } 513 514 /* 515 * USBDevice callbacks 516 */ 517 518 static void usbredir_handle_reset(USBDevice *udev) 519 { 520 USBRedirDevice *dev = USB_REDIRECT(udev); 521 522 DPRINTF("reset device\n"); 523 usbredirparser_send_reset(dev->parser); 524 usbredirparser_do_write(dev->parser); 525 } 526 527 static void usbredir_handle_iso_data(USBRedirDevice *dev, USBPacket *p, 528 uint8_t ep) 529 { 530 int status, len; 531 if (!dev->endpoint[EP2I(ep)].iso_started && 532 !dev->endpoint[EP2I(ep)].iso_error) { 533 struct usb_redir_start_iso_stream_header start_iso = { 534 .endpoint = ep, 535 }; 536 int pkts_per_sec; 537 538 if (dev->dev.speed == USB_SPEED_HIGH) { 539 pkts_per_sec = 8000 / dev->endpoint[EP2I(ep)].interval; 540 } else { 541 pkts_per_sec = 1000 / dev->endpoint[EP2I(ep)].interval; 542 } 543 /* Testing has shown that we need circa 60 ms buffer */ 544 dev->endpoint[EP2I(ep)].bufpq_target_size = (pkts_per_sec * 60) / 1000; 545 546 /* Aim for approx 100 interrupts / second on the client to 547 balance latency and interrupt load */ 548 start_iso.pkts_per_urb = pkts_per_sec / 100; 549 if (start_iso.pkts_per_urb < 1) { 550 start_iso.pkts_per_urb = 1; 551 } else if (start_iso.pkts_per_urb > 32) { 552 start_iso.pkts_per_urb = 32; 553 } 554 555 start_iso.no_urbs = DIV_ROUND_UP( 556 dev->endpoint[EP2I(ep)].bufpq_target_size, 557 start_iso.pkts_per_urb); 558 /* Output endpoints pre-fill only 1/2 of the packets, keeping the rest 559 as overflow buffer. Also see the usbredir protocol documentation */ 560 if (!(ep & USB_DIR_IN)) { 561 start_iso.no_urbs *= 2; 562 } 563 if (start_iso.no_urbs > 16) { 564 start_iso.no_urbs = 16; 565 } 566 567 /* No id, we look at the ep when receiving a status back */ 568 usbredirparser_send_start_iso_stream(dev->parser, 0, &start_iso); 569 usbredirparser_do_write(dev->parser); 570 DPRINTF("iso stream started pkts/sec %d pkts/urb %d urbs %d ep %02X\n", 571 pkts_per_sec, start_iso.pkts_per_urb, start_iso.no_urbs, ep); 572 dev->endpoint[EP2I(ep)].iso_started = 1; 573 dev->endpoint[EP2I(ep)].bufpq_prefilled = 0; 574 dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0; 575 } 576 577 if (ep & USB_DIR_IN) { 578 struct buf_packet *isop; 579 580 if (dev->endpoint[EP2I(ep)].iso_started && 581 !dev->endpoint[EP2I(ep)].bufpq_prefilled) { 582 if (dev->endpoint[EP2I(ep)].bufpq_size < 583 dev->endpoint[EP2I(ep)].bufpq_target_size) { 584 return; 585 } 586 dev->endpoint[EP2I(ep)].bufpq_prefilled = 1; 587 } 588 589 isop = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq); 590 if (isop == NULL) { 591 DPRINTF("iso-token-in ep %02X, no isop, iso_error: %d\n", 592 ep, dev->endpoint[EP2I(ep)].iso_error); 593 /* Re-fill the buffer */ 594 dev->endpoint[EP2I(ep)].bufpq_prefilled = 0; 595 /* Check iso_error for stream errors, otherwise its an underrun */ 596 status = dev->endpoint[EP2I(ep)].iso_error; 597 dev->endpoint[EP2I(ep)].iso_error = 0; 598 p->status = status ? USB_RET_IOERROR : USB_RET_SUCCESS; 599 return; 600 } 601 DPRINTF2("iso-token-in ep %02X status %d len %d queue-size: %d\n", ep, 602 isop->status, isop->len, dev->endpoint[EP2I(ep)].bufpq_size); 603 604 status = isop->status; 605 len = isop->len; 606 if (len > p->iov.size) { 607 ERROR("received iso data is larger then packet ep %02X (%d > %d)\n", 608 ep, len, (int)p->iov.size); 609 len = p->iov.size; 610 status = usb_redir_babble; 611 } 612 usb_packet_copy(p, isop->data, len); 613 bufp_free(dev, isop, ep); 614 usbredir_handle_status(dev, p, status); 615 } else { 616 /* If the stream was not started because of a pending error don't 617 send the packet to the usb-host */ 618 if (dev->endpoint[EP2I(ep)].iso_started) { 619 struct usb_redir_iso_packet_header iso_packet = { 620 .endpoint = ep, 621 .length = p->iov.size 622 }; 623 g_autofree uint8_t *buf = g_malloc(p->iov.size); 624 /* No id, we look at the ep when receiving a status back */ 625 usb_packet_copy(p, buf, p->iov.size); 626 usbredirparser_send_iso_packet(dev->parser, 0, &iso_packet, 627 buf, p->iov.size); 628 usbredirparser_do_write(dev->parser); 629 } 630 status = dev->endpoint[EP2I(ep)].iso_error; 631 dev->endpoint[EP2I(ep)].iso_error = 0; 632 DPRINTF2("iso-token-out ep %02X status %d len %zd\n", ep, status, 633 p->iov.size); 634 usbredir_handle_status(dev, p, status); 635 } 636 } 637 638 static void usbredir_stop_iso_stream(USBRedirDevice *dev, uint8_t ep) 639 { 640 struct usb_redir_stop_iso_stream_header stop_iso_stream = { 641 .endpoint = ep 642 }; 643 if (dev->endpoint[EP2I(ep)].iso_started) { 644 usbredirparser_send_stop_iso_stream(dev->parser, 0, &stop_iso_stream); 645 DPRINTF("iso stream stopped ep %02X\n", ep); 646 dev->endpoint[EP2I(ep)].iso_started = 0; 647 } 648 dev->endpoint[EP2I(ep)].iso_error = 0; 649 usbredir_free_bufpq(dev, ep); 650 } 651 652 /* 653 * The usb-host may poll the endpoint faster then our guest, resulting in lots 654 * of smaller bulkp-s. The below buffered_bulk_in_complete* functions combine 655 * data from multiple bulkp-s into a single packet, avoiding bufpq overflows. 656 */ 657 static void usbredir_buffered_bulk_add_data_to_packet(USBRedirDevice *dev, 658 struct buf_packet *bulkp, int count, USBPacket *p, uint8_t ep) 659 { 660 usb_packet_copy(p, bulkp->data + bulkp->offset, count); 661 bulkp->offset += count; 662 if (bulkp->offset == bulkp->len) { 663 /* Store status in the last packet with data from this bulkp */ 664 usbredir_handle_status(dev, p, bulkp->status); 665 bufp_free(dev, bulkp, ep); 666 } 667 } 668 669 static void usbredir_buffered_bulk_in_complete_raw(USBRedirDevice *dev, 670 USBPacket *p, uint8_t ep) 671 { 672 struct buf_packet *bulkp; 673 int count; 674 675 while ((bulkp = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq)) && 676 p->actual_length < p->iov.size && p->status == USB_RET_SUCCESS) { 677 count = bulkp->len - bulkp->offset; 678 if (count > (p->iov.size - p->actual_length)) { 679 count = p->iov.size - p->actual_length; 680 } 681 usbredir_buffered_bulk_add_data_to_packet(dev, bulkp, count, p, ep); 682 } 683 } 684 685 static void usbredir_buffered_bulk_in_complete_ftdi(USBRedirDevice *dev, 686 USBPacket *p, uint8_t ep) 687 { 688 const int maxp = dev->endpoint[EP2I(ep)].max_packet_size; 689 uint8_t header[2] = { 0, 0 }; 690 struct buf_packet *bulkp; 691 int count; 692 693 while ((bulkp = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq)) && 694 p->actual_length < p->iov.size && p->status == USB_RET_SUCCESS) { 695 if (bulkp->len < 2) { 696 WARNING("malformed ftdi bulk in packet\n"); 697 bufp_free(dev, bulkp, ep); 698 continue; 699 } 700 701 if ((p->actual_length % maxp) == 0) { 702 usb_packet_copy(p, bulkp->data, 2); 703 memcpy(header, bulkp->data, 2); 704 } else { 705 if (bulkp->data[0] != header[0] || bulkp->data[1] != header[1]) { 706 break; /* Different header, add to next packet */ 707 } 708 } 709 710 if (bulkp->offset == 0) { 711 bulkp->offset = 2; /* Skip header */ 712 } 713 count = bulkp->len - bulkp->offset; 714 /* Must repeat the header at maxp interval */ 715 if (count > (maxp - (p->actual_length % maxp))) { 716 count = maxp - (p->actual_length % maxp); 717 } 718 usbredir_buffered_bulk_add_data_to_packet(dev, bulkp, count, p, ep); 719 } 720 } 721 722 static void usbredir_buffered_bulk_in_complete(USBRedirDevice *dev, 723 USBPacket *p, uint8_t ep) 724 { 725 p->status = USB_RET_SUCCESS; /* Clear previous ASYNC status */ 726 dev->buffered_bulk_in_complete(dev, p, ep); 727 DPRINTF("bulk-token-in ep %02X status %d len %d id %"PRIu64"\n", 728 ep, p->status, p->actual_length, p->id); 729 } 730 731 static void usbredir_handle_buffered_bulk_in_data(USBRedirDevice *dev, 732 USBPacket *p, uint8_t ep) 733 { 734 /* Input bulk endpoint, buffered packet input */ 735 if (!dev->endpoint[EP2I(ep)].bulk_receiving_started) { 736 int bpt; 737 struct usb_redir_start_bulk_receiving_header start = { 738 .endpoint = ep, 739 .stream_id = 0, 740 .no_transfers = 5, 741 }; 742 /* Round bytes_per_transfer up to a multiple of max_packet_size */ 743 bpt = 512 + dev->endpoint[EP2I(ep)].max_packet_size - 1; 744 bpt /= dev->endpoint[EP2I(ep)].max_packet_size; 745 bpt *= dev->endpoint[EP2I(ep)].max_packet_size; 746 start.bytes_per_transfer = bpt; 747 /* No id, we look at the ep when receiving a status back */ 748 usbredirparser_send_start_bulk_receiving(dev->parser, 0, &start); 749 usbredirparser_do_write(dev->parser); 750 DPRINTF("bulk receiving started bytes/transfer %u count %d ep %02X\n", 751 start.bytes_per_transfer, start.no_transfers, ep); 752 dev->endpoint[EP2I(ep)].bulk_receiving_started = 1; 753 /* We don't really want to drop bulk packets ever, but 754 having some upper limit to how much we buffer is good. */ 755 dev->endpoint[EP2I(ep)].bufpq_target_size = 5000; 756 dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0; 757 } 758 759 if (QTAILQ_EMPTY(&dev->endpoint[EP2I(ep)].bufpq)) { 760 DPRINTF("bulk-token-in ep %02X, no bulkp\n", ep); 761 assert(dev->endpoint[EP2I(ep)].pending_async_packet == NULL); 762 dev->endpoint[EP2I(ep)].pending_async_packet = p; 763 p->status = USB_RET_ASYNC; 764 return; 765 } 766 usbredir_buffered_bulk_in_complete(dev, p, ep); 767 } 768 769 static void usbredir_stop_bulk_receiving(USBRedirDevice *dev, uint8_t ep) 770 { 771 struct usb_redir_stop_bulk_receiving_header stop_bulk = { 772 .endpoint = ep, 773 .stream_id = 0, 774 }; 775 if (dev->endpoint[EP2I(ep)].bulk_receiving_started) { 776 usbredirparser_send_stop_bulk_receiving(dev->parser, 0, &stop_bulk); 777 DPRINTF("bulk receiving stopped ep %02X\n", ep); 778 dev->endpoint[EP2I(ep)].bulk_receiving_started = 0; 779 } 780 usbredir_free_bufpq(dev, ep); 781 } 782 783 static void usbredir_handle_bulk_data(USBRedirDevice *dev, USBPacket *p, 784 uint8_t ep) 785 { 786 struct usb_redir_bulk_packet_header bulk_packet; 787 size_t size = usb_packet_size(p); 788 const int maxp = dev->endpoint[EP2I(ep)].max_packet_size; 789 790 if (usbredir_already_in_flight(dev, p->id)) { 791 p->status = USB_RET_ASYNC; 792 return; 793 } 794 795 if (dev->endpoint[EP2I(ep)].bulk_receiving_enabled) { 796 if (size != 0 && (size % maxp) == 0) { 797 usbredir_handle_buffered_bulk_in_data(dev, p, ep); 798 return; 799 } 800 WARNING("bulk recv invalid size %zd ep %02x, disabling\n", size, ep); 801 assert(dev->endpoint[EP2I(ep)].pending_async_packet == NULL); 802 usbredir_stop_bulk_receiving(dev, ep); 803 dev->endpoint[EP2I(ep)].bulk_receiving_enabled = 0; 804 } 805 806 DPRINTF("bulk-out ep %02X stream %u len %zd id %"PRIu64"\n", 807 ep, p->stream, size, p->id); 808 809 bulk_packet.endpoint = ep; 810 bulk_packet.length = size; 811 bulk_packet.stream_id = p->stream; 812 bulk_packet.length_high = size >> 16; 813 assert(bulk_packet.length_high == 0 || 814 usbredirparser_peer_has_cap(dev->parser, 815 usb_redir_cap_32bits_bulk_length)); 816 817 if (ep & USB_DIR_IN || size == 0) { 818 usbredirparser_send_bulk_packet(dev->parser, p->id, 819 &bulk_packet, NULL, 0); 820 } else { 821 g_autofree uint8_t *buf = g_malloc(size); 822 usb_packet_copy(p, buf, size); 823 usbredir_log_data(dev, "bulk data out:", buf, size); 824 usbredirparser_send_bulk_packet(dev->parser, p->id, 825 &bulk_packet, buf, size); 826 } 827 usbredirparser_do_write(dev->parser); 828 p->status = USB_RET_ASYNC; 829 } 830 831 static void usbredir_handle_interrupt_in_data(USBRedirDevice *dev, 832 USBPacket *p, uint8_t ep) 833 { 834 /* Input interrupt endpoint, buffered packet input */ 835 struct buf_packet *intp, *intp_to_free; 836 int status, len, sum; 837 838 if (!dev->endpoint[EP2I(ep)].interrupt_started && 839 !dev->endpoint[EP2I(ep)].interrupt_error) { 840 struct usb_redir_start_interrupt_receiving_header start_int = { 841 .endpoint = ep, 842 }; 843 /* No id, we look at the ep when receiving a status back */ 844 usbredirparser_send_start_interrupt_receiving(dev->parser, 0, 845 &start_int); 846 usbredirparser_do_write(dev->parser); 847 DPRINTF("interrupt recv started ep %02X\n", ep); 848 dev->endpoint[EP2I(ep)].interrupt_started = 1; 849 /* We don't really want to drop interrupt packets ever, but 850 having some upper limit to how much we buffer is good. */ 851 dev->endpoint[EP2I(ep)].bufpq_target_size = 1000; 852 dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0; 853 } 854 855 /* check for completed interrupt message (with all fragments) */ 856 sum = 0; 857 QTAILQ_FOREACH(intp, &dev->endpoint[EP2I(ep)].bufpq, next) { 858 sum += intp->len; 859 if (intp->len < dev->endpoint[EP2I(ep)].max_packet_size || 860 sum >= p->iov.size) 861 break; 862 } 863 864 if (intp == NULL) { 865 DPRINTF2("interrupt-token-in ep %02X, no intp, buffered %d\n", ep, sum); 866 /* Check interrupt_error for stream errors */ 867 status = dev->endpoint[EP2I(ep)].interrupt_error; 868 dev->endpoint[EP2I(ep)].interrupt_error = 0; 869 if (status) { 870 usbredir_handle_status(dev, p, status); 871 } else { 872 p->status = USB_RET_NAK; 873 } 874 return; 875 } 876 877 /* copy of completed interrupt message */ 878 sum = 0; 879 status = usb_redir_success; 880 intp_to_free = NULL; 881 QTAILQ_FOREACH(intp, &dev->endpoint[EP2I(ep)].bufpq, next) { 882 if (intp_to_free) { 883 bufp_free(dev, intp_to_free, ep); 884 } 885 DPRINTF("interrupt-token-in ep %02X fragment status %d len %d\n", ep, 886 intp->status, intp->len); 887 888 sum += intp->len; 889 len = intp->len; 890 if (status == usb_redir_success) { 891 status = intp->status; 892 } 893 if (sum > p->iov.size) { 894 ERROR("received int data is larger then packet ep %02X\n", ep); 895 len -= (sum - p->iov.size); 896 sum = p->iov.size; 897 status = usb_redir_babble; 898 } 899 900 usb_packet_copy(p, intp->data, len); 901 902 intp_to_free = intp; 903 if (intp->len < dev->endpoint[EP2I(ep)].max_packet_size || 904 sum >= p->iov.size) 905 break; 906 } 907 if (intp_to_free) { 908 bufp_free(dev, intp_to_free, ep); 909 } 910 DPRINTF("interrupt-token-in ep %02X summary status %d len %d\n", ep, 911 status, sum); 912 usbredir_handle_status(dev, p, status); 913 } 914 915 /* 916 * Handle interrupt out data, the usbredir protocol expects us to do this 917 * async, so that it can report back a completion status. But guests will 918 * expect immediate completion for an interrupt endpoint, and handling this 919 * async causes migration issues. So we report success directly, counting 920 * on the fact that output interrupt packets normally always succeed. 921 */ 922 static void usbredir_handle_interrupt_out_data(USBRedirDevice *dev, 923 USBPacket *p, uint8_t ep) 924 { 925 struct usb_redir_interrupt_packet_header interrupt_packet; 926 g_autofree uint8_t *buf = g_malloc(p->iov.size); 927 928 DPRINTF("interrupt-out ep %02X len %zd id %"PRIu64"\n", ep, 929 p->iov.size, p->id); 930 931 interrupt_packet.endpoint = ep; 932 interrupt_packet.length = p->iov.size; 933 934 usb_packet_copy(p, buf, p->iov.size); 935 usbredir_log_data(dev, "interrupt data out:", buf, p->iov.size); 936 usbredirparser_send_interrupt_packet(dev->parser, p->id, 937 &interrupt_packet, buf, p->iov.size); 938 usbredirparser_do_write(dev->parser); 939 } 940 941 static void usbredir_stop_interrupt_receiving(USBRedirDevice *dev, 942 uint8_t ep) 943 { 944 struct usb_redir_stop_interrupt_receiving_header stop_interrupt_recv = { 945 .endpoint = ep 946 }; 947 if (dev->endpoint[EP2I(ep)].interrupt_started) { 948 usbredirparser_send_stop_interrupt_receiving(dev->parser, 0, 949 &stop_interrupt_recv); 950 DPRINTF("interrupt recv stopped ep %02X\n", ep); 951 dev->endpoint[EP2I(ep)].interrupt_started = 0; 952 } 953 dev->endpoint[EP2I(ep)].interrupt_error = 0; 954 usbredir_free_bufpq(dev, ep); 955 } 956 957 static void usbredir_handle_data(USBDevice *udev, USBPacket *p) 958 { 959 USBRedirDevice *dev = USB_REDIRECT(udev); 960 uint8_t ep; 961 962 ep = p->ep->nr; 963 if (p->pid == USB_TOKEN_IN) { 964 ep |= USB_DIR_IN; 965 } 966 967 switch (dev->endpoint[EP2I(ep)].type) { 968 case USB_ENDPOINT_XFER_CONTROL: 969 ERROR("handle_data called for control transfer on ep %02X\n", ep); 970 p->status = USB_RET_NAK; 971 break; 972 case USB_ENDPOINT_XFER_BULK: 973 if (p->state == USB_PACKET_SETUP && p->pid == USB_TOKEN_IN && 974 p->ep->pipeline) { 975 p->status = USB_RET_ADD_TO_QUEUE; 976 break; 977 } 978 usbredir_handle_bulk_data(dev, p, ep); 979 break; 980 case USB_ENDPOINT_XFER_ISOC: 981 usbredir_handle_iso_data(dev, p, ep); 982 break; 983 case USB_ENDPOINT_XFER_INT: 984 if (ep & USB_DIR_IN) { 985 usbredir_handle_interrupt_in_data(dev, p, ep); 986 } else { 987 usbredir_handle_interrupt_out_data(dev, p, ep); 988 } 989 break; 990 default: 991 ERROR("handle_data ep %02X has unknown type %d\n", ep, 992 dev->endpoint[EP2I(ep)].type); 993 p->status = USB_RET_NAK; 994 } 995 } 996 997 static void usbredir_flush_ep_queue(USBDevice *dev, USBEndpoint *ep) 998 { 999 if (ep->pid == USB_TOKEN_IN && ep->pipeline) { 1000 usb_ep_combine_input_packets(ep); 1001 } 1002 } 1003 1004 static void usbredir_stop_ep(USBRedirDevice *dev, int i) 1005 { 1006 uint8_t ep = I2EP(i); 1007 1008 switch (dev->endpoint[i].type) { 1009 case USB_ENDPOINT_XFER_BULK: 1010 if (ep & USB_DIR_IN) { 1011 usbredir_stop_bulk_receiving(dev, ep); 1012 } 1013 break; 1014 case USB_ENDPOINT_XFER_ISOC: 1015 usbredir_stop_iso_stream(dev, ep); 1016 break; 1017 case USB_ENDPOINT_XFER_INT: 1018 if (ep & USB_DIR_IN) { 1019 usbredir_stop_interrupt_receiving(dev, ep); 1020 } 1021 break; 1022 } 1023 usbredir_free_bufpq(dev, ep); 1024 } 1025 1026 static void usbredir_ep_stopped(USBDevice *udev, USBEndpoint *uep) 1027 { 1028 USBRedirDevice *dev = USB_REDIRECT(udev); 1029 1030 usbredir_stop_ep(dev, USBEP2I(uep)); 1031 usbredirparser_do_write(dev->parser); 1032 } 1033 1034 static void usbredir_set_config(USBRedirDevice *dev, USBPacket *p, 1035 int config) 1036 { 1037 struct usb_redir_set_configuration_header set_config; 1038 int i; 1039 1040 DPRINTF("set config %d id %"PRIu64"\n", config, p->id); 1041 1042 for (i = 0; i < MAX_ENDPOINTS; i++) { 1043 usbredir_stop_ep(dev, i); 1044 } 1045 1046 set_config.configuration = config; 1047 usbredirparser_send_set_configuration(dev->parser, p->id, &set_config); 1048 usbredirparser_do_write(dev->parser); 1049 p->status = USB_RET_ASYNC; 1050 } 1051 1052 static void usbredir_get_config(USBRedirDevice *dev, USBPacket *p) 1053 { 1054 DPRINTF("get config id %"PRIu64"\n", p->id); 1055 1056 usbredirparser_send_get_configuration(dev->parser, p->id); 1057 usbredirparser_do_write(dev->parser); 1058 p->status = USB_RET_ASYNC; 1059 } 1060 1061 static void usbredir_set_interface(USBRedirDevice *dev, USBPacket *p, 1062 int interface, int alt) 1063 { 1064 struct usb_redir_set_alt_setting_header set_alt; 1065 int i; 1066 1067 DPRINTF("set interface %d alt %d id %"PRIu64"\n", interface, alt, p->id); 1068 1069 for (i = 0; i < MAX_ENDPOINTS; i++) { 1070 if (dev->endpoint[i].interface == interface) { 1071 usbredir_stop_ep(dev, i); 1072 } 1073 } 1074 1075 set_alt.interface = interface; 1076 set_alt.alt = alt; 1077 usbredirparser_send_set_alt_setting(dev->parser, p->id, &set_alt); 1078 usbredirparser_do_write(dev->parser); 1079 p->status = USB_RET_ASYNC; 1080 } 1081 1082 static void usbredir_get_interface(USBRedirDevice *dev, USBPacket *p, 1083 int interface) 1084 { 1085 struct usb_redir_get_alt_setting_header get_alt; 1086 1087 DPRINTF("get interface %d id %"PRIu64"\n", interface, p->id); 1088 1089 get_alt.interface = interface; 1090 usbredirparser_send_get_alt_setting(dev->parser, p->id, &get_alt); 1091 usbredirparser_do_write(dev->parser); 1092 p->status = USB_RET_ASYNC; 1093 } 1094 1095 static void usbredir_handle_control(USBDevice *udev, USBPacket *p, 1096 int request, int value, int index, int length, uint8_t *data) 1097 { 1098 USBRedirDevice *dev = USB_REDIRECT(udev); 1099 struct usb_redir_control_packet_header control_packet; 1100 1101 if (usbredir_already_in_flight(dev, p->id)) { 1102 p->status = USB_RET_ASYNC; 1103 return; 1104 } 1105 1106 /* Special cases for certain standard device requests */ 1107 switch (request) { 1108 case DeviceOutRequest | USB_REQ_SET_ADDRESS: 1109 DPRINTF("set address %d\n", value); 1110 dev->dev.addr = value; 1111 return; 1112 case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: 1113 usbredir_set_config(dev, p, value & 0xff); 1114 return; 1115 case DeviceRequest | USB_REQ_GET_CONFIGURATION: 1116 usbredir_get_config(dev, p); 1117 return; 1118 case InterfaceOutRequest | USB_REQ_SET_INTERFACE: 1119 usbredir_set_interface(dev, p, index, value); 1120 return; 1121 case InterfaceRequest | USB_REQ_GET_INTERFACE: 1122 usbredir_get_interface(dev, p, index); 1123 return; 1124 } 1125 1126 /* Normal ctrl requests, note request is (bRequestType << 8) | bRequest */ 1127 DPRINTF( 1128 "ctrl-out type 0x%x req 0x%x val 0x%x index %d len %d id %"PRIu64"\n", 1129 request >> 8, request & 0xff, value, index, length, p->id); 1130 1131 control_packet.request = request & 0xFF; 1132 control_packet.requesttype = request >> 8; 1133 control_packet.endpoint = control_packet.requesttype & USB_DIR_IN; 1134 control_packet.value = value; 1135 control_packet.index = index; 1136 control_packet.length = length; 1137 1138 if (control_packet.requesttype & USB_DIR_IN) { 1139 usbredirparser_send_control_packet(dev->parser, p->id, 1140 &control_packet, NULL, 0); 1141 } else { 1142 usbredir_log_data(dev, "ctrl data out:", data, length); 1143 usbredirparser_send_control_packet(dev->parser, p->id, 1144 &control_packet, data, length); 1145 } 1146 usbredirparser_do_write(dev->parser); 1147 p->status = USB_RET_ASYNC; 1148 } 1149 1150 static int usbredir_alloc_streams(USBDevice *udev, USBEndpoint **eps, 1151 int nr_eps, int streams) 1152 { 1153 USBRedirDevice *dev = USB_REDIRECT(udev); 1154 #if USBREDIR_VERSION >= 0x000700 1155 struct usb_redir_alloc_bulk_streams_header alloc_streams; 1156 int i; 1157 1158 if (!usbredirparser_peer_has_cap(dev->parser, 1159 usb_redir_cap_bulk_streams)) { 1160 ERROR("peer does not support streams\n"); 1161 goto reject; 1162 } 1163 1164 if (streams == 0) { 1165 ERROR("request to allocate 0 streams\n"); 1166 return -1; 1167 } 1168 1169 alloc_streams.no_streams = streams; 1170 alloc_streams.endpoints = 0; 1171 for (i = 0; i < nr_eps; i++) { 1172 alloc_streams.endpoints |= 1 << USBEP2I(eps[i]); 1173 } 1174 usbredirparser_send_alloc_bulk_streams(dev->parser, 0, &alloc_streams); 1175 usbredirparser_do_write(dev->parser); 1176 1177 return 0; 1178 #else 1179 ERROR("usbredir_alloc_streams not implemented\n"); 1180 goto reject; 1181 #endif 1182 reject: 1183 ERROR("streams are not available, disconnecting\n"); 1184 qemu_bh_schedule(dev->device_reject_bh); 1185 return -1; 1186 } 1187 1188 static void usbredir_free_streams(USBDevice *udev, USBEndpoint **eps, 1189 int nr_eps) 1190 { 1191 #if USBREDIR_VERSION >= 0x000700 1192 USBRedirDevice *dev = USB_REDIRECT(udev); 1193 struct usb_redir_free_bulk_streams_header free_streams; 1194 int i; 1195 1196 if (!usbredirparser_peer_has_cap(dev->parser, 1197 usb_redir_cap_bulk_streams)) { 1198 return; 1199 } 1200 1201 free_streams.endpoints = 0; 1202 for (i = 0; i < nr_eps; i++) { 1203 free_streams.endpoints |= 1 << USBEP2I(eps[i]); 1204 } 1205 usbredirparser_send_free_bulk_streams(dev->parser, 0, &free_streams); 1206 usbredirparser_do_write(dev->parser); 1207 #endif 1208 } 1209 1210 /* 1211 * Close events can be triggered by usbredirparser_do_write which gets called 1212 * from within the USBDevice data / control packet callbacks and doing a 1213 * usb_detach from within these callbacks is not a good idea. 1214 * 1215 * So we use a bh handler to take care of close events. 1216 */ 1217 static void usbredir_chardev_close_bh(void *opaque) 1218 { 1219 USBRedirDevice *dev = opaque; 1220 1221 qemu_bh_cancel(dev->device_reject_bh); 1222 usbredir_device_disconnect(dev); 1223 1224 if (dev->parser) { 1225 DPRINTF("destroying usbredirparser\n"); 1226 usbredirparser_destroy(dev->parser); 1227 dev->parser = NULL; 1228 } 1229 if (dev->watch) { 1230 g_source_remove(dev->watch); 1231 dev->watch = 0; 1232 } 1233 } 1234 1235 static void usbredir_create_parser(USBRedirDevice *dev) 1236 { 1237 uint32_t caps[USB_REDIR_CAPS_SIZE] = { 0, }; 1238 int flags = 0; 1239 1240 DPRINTF("creating usbredirparser\n"); 1241 1242 dev->parser = qemu_oom_check(usbredirparser_create()); 1243 dev->parser->priv = dev; 1244 dev->parser->log_func = usbredir_log; 1245 dev->parser->read_func = usbredir_read; 1246 dev->parser->write_func = usbredir_write; 1247 dev->parser->hello_func = usbredir_hello; 1248 dev->parser->device_connect_func = usbredir_device_connect; 1249 dev->parser->device_disconnect_func = usbredir_device_disconnect; 1250 dev->parser->interface_info_func = usbredir_interface_info; 1251 dev->parser->ep_info_func = usbredir_ep_info; 1252 dev->parser->configuration_status_func = usbredir_configuration_status; 1253 dev->parser->alt_setting_status_func = usbredir_alt_setting_status; 1254 dev->parser->iso_stream_status_func = usbredir_iso_stream_status; 1255 dev->parser->interrupt_receiving_status_func = 1256 usbredir_interrupt_receiving_status; 1257 dev->parser->bulk_streams_status_func = usbredir_bulk_streams_status; 1258 dev->parser->bulk_receiving_status_func = usbredir_bulk_receiving_status; 1259 dev->parser->control_packet_func = usbredir_control_packet; 1260 dev->parser->bulk_packet_func = usbredir_bulk_packet; 1261 dev->parser->iso_packet_func = usbredir_iso_packet; 1262 dev->parser->interrupt_packet_func = usbredir_interrupt_packet; 1263 dev->parser->buffered_bulk_packet_func = usbredir_buffered_bulk_packet; 1264 dev->read_buf = NULL; 1265 dev->read_buf_size = 0; 1266 1267 usbredirparser_caps_set_cap(caps, usb_redir_cap_connect_device_version); 1268 usbredirparser_caps_set_cap(caps, usb_redir_cap_filter); 1269 usbredirparser_caps_set_cap(caps, usb_redir_cap_ep_info_max_packet_size); 1270 usbredirparser_caps_set_cap(caps, usb_redir_cap_64bits_ids); 1271 usbredirparser_caps_set_cap(caps, usb_redir_cap_32bits_bulk_length); 1272 usbredirparser_caps_set_cap(caps, usb_redir_cap_bulk_receiving); 1273 #if USBREDIR_VERSION >= 0x000700 1274 if (dev->enable_streams) { 1275 usbredirparser_caps_set_cap(caps, usb_redir_cap_bulk_streams); 1276 } 1277 #endif 1278 1279 if (runstate_check(RUN_STATE_INMIGRATE)) { 1280 flags |= usbredirparser_fl_no_hello; 1281 } 1282 usbredirparser_init(dev->parser, VERSION, caps, USB_REDIR_CAPS_SIZE, 1283 flags); 1284 usbredirparser_do_write(dev->parser); 1285 } 1286 1287 static void usbredir_reject_device(USBRedirDevice *dev) 1288 { 1289 usbredir_device_disconnect(dev); 1290 if (usbredirparser_peer_has_cap(dev->parser, usb_redir_cap_filter)) { 1291 usbredirparser_send_filter_reject(dev->parser); 1292 usbredirparser_do_write(dev->parser); 1293 } 1294 } 1295 1296 /* 1297 * We may need to reject the device when the hcd calls alloc_streams, doing 1298 * an usb_detach from within a hcd call is not a good idea, hence this bh. 1299 */ 1300 static void usbredir_device_reject_bh(void *opaque) 1301 { 1302 USBRedirDevice *dev = opaque; 1303 1304 usbredir_reject_device(dev); 1305 } 1306 1307 static void usbredir_do_attach(void *opaque) 1308 { 1309 USBRedirDevice *dev = opaque; 1310 Error *local_err = NULL; 1311 1312 /* In order to work properly with XHCI controllers we need these caps */ 1313 if ((dev->dev.port->speedmask & USB_SPEED_MASK_SUPER) && !( 1314 usbredirparser_peer_has_cap(dev->parser, 1315 usb_redir_cap_ep_info_max_packet_size) && 1316 usbredirparser_peer_has_cap(dev->parser, 1317 usb_redir_cap_32bits_bulk_length) && 1318 usbredirparser_peer_has_cap(dev->parser, 1319 usb_redir_cap_64bits_ids))) { 1320 ERROR("usb-redir-host lacks capabilities needed for use with XHCI\n"); 1321 usbredir_reject_device(dev); 1322 return; 1323 } 1324 1325 usb_device_attach(&dev->dev, &local_err); 1326 if (local_err) { 1327 error_report_err(local_err); 1328 WARNING("rejecting device due to speed mismatch\n"); 1329 usbredir_reject_device(dev); 1330 } 1331 } 1332 1333 /* 1334 * chardev callbacks 1335 */ 1336 1337 static int usbredir_chardev_can_read(void *opaque) 1338 { 1339 USBRedirDevice *dev = opaque; 1340 1341 if (!dev->parser) { 1342 WARNING("chardev_can_read called on non open chardev!\n"); 1343 return 0; 1344 } 1345 1346 /* Don't read new data from the chardev until our state is fully synced */ 1347 if (!runstate_check(RUN_STATE_RUNNING)) { 1348 return 0; 1349 } 1350 1351 /* usbredir_parser_do_read will consume *all* data we give it */ 1352 return 1 * MiB; 1353 } 1354 1355 static void usbredir_chardev_read(void *opaque, const uint8_t *buf, int size) 1356 { 1357 USBRedirDevice *dev = opaque; 1358 1359 /* No recursion allowed! */ 1360 assert(dev->read_buf == NULL); 1361 1362 dev->read_buf = buf; 1363 dev->read_buf_size = size; 1364 1365 usbredirparser_do_read(dev->parser); 1366 /* Send any acks, etc. which may be queued now */ 1367 usbredirparser_do_write(dev->parser); 1368 } 1369 1370 static void usbredir_chardev_event(void *opaque, QEMUChrEvent event) 1371 { 1372 USBRedirDevice *dev = opaque; 1373 1374 switch (event) { 1375 case CHR_EVENT_OPENED: 1376 DPRINTF("chardev open\n"); 1377 /* Make sure any pending closes are handled (no-op if none pending) */ 1378 usbredir_chardev_close_bh(dev); 1379 qemu_bh_cancel(dev->chardev_close_bh); 1380 usbredir_create_parser(dev); 1381 break; 1382 case CHR_EVENT_CLOSED: 1383 DPRINTF("chardev close\n"); 1384 qemu_bh_schedule(dev->chardev_close_bh); 1385 break; 1386 case CHR_EVENT_BREAK: 1387 case CHR_EVENT_MUX_IN: 1388 case CHR_EVENT_MUX_OUT: 1389 /* Ignore */ 1390 break; 1391 } 1392 } 1393 1394 /* 1395 * init + destroy 1396 */ 1397 1398 static void usbredir_vm_state_change(void *priv, bool running, RunState state) 1399 { 1400 USBRedirDevice *dev = priv; 1401 1402 if (state == RUN_STATE_RUNNING && dev->parser != NULL) { 1403 usbredirparser_do_write(dev->parser); /* Flush any pending writes */ 1404 } 1405 } 1406 1407 static void usbredir_init_endpoints(USBRedirDevice *dev) 1408 { 1409 int i; 1410 1411 usb_ep_init(&dev->dev); 1412 memset(dev->endpoint, 0, sizeof(dev->endpoint)); 1413 for (i = 0; i < MAX_ENDPOINTS; i++) { 1414 dev->endpoint[i].dev = dev; 1415 QTAILQ_INIT(&dev->endpoint[i].bufpq); 1416 } 1417 } 1418 1419 static void usbredir_realize(USBDevice *udev, Error **errp) 1420 { 1421 USBRedirDevice *dev = USB_REDIRECT(udev); 1422 int i; 1423 1424 if (!qemu_chr_fe_backend_connected(&dev->cs)) { 1425 error_setg(errp, QERR_MISSING_PARAMETER, "chardev"); 1426 return; 1427 } 1428 1429 if (dev->filter_str) { 1430 i = usbredirfilter_string_to_rules(dev->filter_str, ":", "|", 1431 &dev->filter_rules, 1432 &dev->filter_rules_count); 1433 if (i) { 1434 error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "filter", 1435 "a usb device filter string"); 1436 return; 1437 } 1438 } 1439 1440 dev->chardev_close_bh = qemu_bh_new(usbredir_chardev_close_bh, dev); 1441 dev->device_reject_bh = qemu_bh_new(usbredir_device_reject_bh, dev); 1442 dev->attach_timer = timer_new_ms(QEMU_CLOCK_VIRTUAL, usbredir_do_attach, dev); 1443 1444 packet_id_queue_init(&dev->cancelled, dev, "cancelled"); 1445 packet_id_queue_init(&dev->already_in_flight, dev, "already-in-flight"); 1446 usbredir_init_endpoints(dev); 1447 1448 /* We'll do the attach once we receive the speed from the usb-host */ 1449 udev->auto_attach = 0; 1450 1451 /* Will be cleared during setup when we find conflicts */ 1452 dev->compatible_speedmask = USB_SPEED_MASK_FULL | USB_SPEED_MASK_HIGH; 1453 1454 /* Let the backend know we are ready */ 1455 qemu_chr_fe_set_handlers(&dev->cs, usbredir_chardev_can_read, 1456 usbredir_chardev_read, usbredir_chardev_event, 1457 NULL, dev, NULL, true); 1458 1459 dev->vmstate = 1460 qemu_add_vm_change_state_handler(usbredir_vm_state_change, dev); 1461 } 1462 1463 static void usbredir_cleanup_device_queues(USBRedirDevice *dev) 1464 { 1465 int i; 1466 1467 packet_id_queue_empty(&dev->cancelled); 1468 packet_id_queue_empty(&dev->already_in_flight); 1469 for (i = 0; i < MAX_ENDPOINTS; i++) { 1470 usbredir_free_bufpq(dev, I2EP(i)); 1471 } 1472 } 1473 1474 static void usbredir_unrealize(USBDevice *udev) 1475 { 1476 USBRedirDevice *dev = USB_REDIRECT(udev); 1477 1478 qemu_chr_fe_deinit(&dev->cs, true); 1479 1480 /* Note must be done after qemu_chr_close, as that causes a close event */ 1481 qemu_bh_delete(dev->chardev_close_bh); 1482 qemu_bh_delete(dev->device_reject_bh); 1483 1484 timer_free(dev->attach_timer); 1485 1486 usbredir_cleanup_device_queues(dev); 1487 1488 if (dev->parser) { 1489 usbredirparser_destroy(dev->parser); 1490 } 1491 if (dev->watch) { 1492 g_source_remove(dev->watch); 1493 } 1494 1495 free(dev->filter_rules); 1496 qemu_del_vm_change_state_handler(dev->vmstate); 1497 } 1498 1499 static int usbredir_check_filter(USBRedirDevice *dev) 1500 { 1501 if (dev->interface_info.interface_count == NO_INTERFACE_INFO) { 1502 ERROR("No interface info for device\n"); 1503 goto error; 1504 } 1505 1506 if (dev->filter_rules) { 1507 if (!usbredirparser_peer_has_cap(dev->parser, 1508 usb_redir_cap_connect_device_version)) { 1509 ERROR("Device filter specified and peer does not have the " 1510 "connect_device_version capability\n"); 1511 goto error; 1512 } 1513 1514 if (usbredirfilter_check( 1515 dev->filter_rules, 1516 dev->filter_rules_count, 1517 dev->device_info.device_class, 1518 dev->device_info.device_subclass, 1519 dev->device_info.device_protocol, 1520 dev->interface_info.interface_class, 1521 dev->interface_info.interface_subclass, 1522 dev->interface_info.interface_protocol, 1523 dev->interface_info.interface_count, 1524 dev->device_info.vendor_id, 1525 dev->device_info.product_id, 1526 dev->device_info.device_version_bcd, 1527 0) != 0) { 1528 goto error; 1529 } 1530 } 1531 1532 return 0; 1533 1534 error: 1535 usbredir_reject_device(dev); 1536 return -1; 1537 } 1538 1539 static void usbredir_check_bulk_receiving(USBRedirDevice *dev) 1540 { 1541 int i, j, quirks; 1542 1543 if (!usbredirparser_peer_has_cap(dev->parser, 1544 usb_redir_cap_bulk_receiving)) { 1545 return; 1546 } 1547 1548 for (i = EP2I(USB_DIR_IN); i < MAX_ENDPOINTS; i++) { 1549 dev->endpoint[i].bulk_receiving_enabled = 0; 1550 } 1551 1552 if (dev->interface_info.interface_count == NO_INTERFACE_INFO) { 1553 return; 1554 } 1555 1556 for (i = 0; i < dev->interface_info.interface_count; i++) { 1557 quirks = usb_get_quirks(dev->device_info.vendor_id, 1558 dev->device_info.product_id, 1559 dev->interface_info.interface_class[i], 1560 dev->interface_info.interface_subclass[i], 1561 dev->interface_info.interface_protocol[i]); 1562 if (!(quirks & USB_QUIRK_BUFFER_BULK_IN)) { 1563 continue; 1564 } 1565 if (quirks & USB_QUIRK_IS_FTDI) { 1566 dev->buffered_bulk_in_complete = 1567 usbredir_buffered_bulk_in_complete_ftdi; 1568 } else { 1569 dev->buffered_bulk_in_complete = 1570 usbredir_buffered_bulk_in_complete_raw; 1571 } 1572 1573 for (j = EP2I(USB_DIR_IN); j < MAX_ENDPOINTS; j++) { 1574 if (dev->endpoint[j].interface == 1575 dev->interface_info.interface[i] && 1576 dev->endpoint[j].type == USB_ENDPOINT_XFER_BULK && 1577 dev->endpoint[j].max_packet_size != 0) { 1578 dev->endpoint[j].bulk_receiving_enabled = 1; 1579 /* 1580 * With buffering pipelining is not necessary. Also packet 1581 * combining and bulk in buffering don't play nice together! 1582 */ 1583 I2USBEP(dev, j)->pipeline = false; 1584 break; /* Only buffer for the first ep of each intf */ 1585 } 1586 } 1587 } 1588 } 1589 1590 /* 1591 * usbredirparser packet complete callbacks 1592 */ 1593 1594 static void usbredir_handle_status(USBRedirDevice *dev, USBPacket *p, 1595 int status) 1596 { 1597 switch (status) { 1598 case usb_redir_success: 1599 p->status = USB_RET_SUCCESS; /* Clear previous ASYNC status */ 1600 break; 1601 case usb_redir_stall: 1602 p->status = USB_RET_STALL; 1603 break; 1604 case usb_redir_cancelled: 1605 /* 1606 * When the usbredir-host unredirects a device, it will report a status 1607 * of cancelled for all pending packets, followed by a disconnect msg. 1608 */ 1609 p->status = USB_RET_IOERROR; 1610 break; 1611 case usb_redir_inval: 1612 WARNING("got invalid param error from usb-host?\n"); 1613 p->status = USB_RET_IOERROR; 1614 break; 1615 case usb_redir_babble: 1616 p->status = USB_RET_BABBLE; 1617 break; 1618 case usb_redir_ioerror: 1619 case usb_redir_timeout: 1620 default: 1621 p->status = USB_RET_IOERROR; 1622 } 1623 } 1624 1625 static void usbredir_hello(void *priv, struct usb_redir_hello_header *h) 1626 { 1627 USBRedirDevice *dev = priv; 1628 1629 /* Try to send the filter info now that we've the usb-host's caps */ 1630 if (usbredirparser_peer_has_cap(dev->parser, usb_redir_cap_filter) && 1631 dev->filter_rules) { 1632 usbredirparser_send_filter_filter(dev->parser, dev->filter_rules, 1633 dev->filter_rules_count); 1634 usbredirparser_do_write(dev->parser); 1635 } 1636 } 1637 1638 static void usbredir_device_connect(void *priv, 1639 struct usb_redir_device_connect_header *device_connect) 1640 { 1641 USBRedirDevice *dev = priv; 1642 const char *speed; 1643 1644 if (timer_pending(dev->attach_timer) || dev->dev.attached) { 1645 ERROR("Received device connect while already connected\n"); 1646 return; 1647 } 1648 1649 switch (device_connect->speed) { 1650 case usb_redir_speed_low: 1651 speed = "low speed"; 1652 dev->dev.speed = USB_SPEED_LOW; 1653 dev->compatible_speedmask &= ~USB_SPEED_MASK_FULL; 1654 dev->compatible_speedmask &= ~USB_SPEED_MASK_HIGH; 1655 break; 1656 case usb_redir_speed_full: 1657 speed = "full speed"; 1658 dev->dev.speed = USB_SPEED_FULL; 1659 dev->compatible_speedmask &= ~USB_SPEED_MASK_HIGH; 1660 break; 1661 case usb_redir_speed_high: 1662 speed = "high speed"; 1663 dev->dev.speed = USB_SPEED_HIGH; 1664 break; 1665 case usb_redir_speed_super: 1666 speed = "super speed"; 1667 dev->dev.speed = USB_SPEED_SUPER; 1668 break; 1669 default: 1670 speed = "unknown speed"; 1671 dev->dev.speed = USB_SPEED_FULL; 1672 } 1673 1674 if (usbredirparser_peer_has_cap(dev->parser, 1675 usb_redir_cap_connect_device_version)) { 1676 INFO("attaching %s device %04x:%04x version %d.%d class %02x\n", 1677 speed, device_connect->vendor_id, device_connect->product_id, 1678 ((device_connect->device_version_bcd & 0xf000) >> 12) * 10 + 1679 ((device_connect->device_version_bcd & 0x0f00) >> 8), 1680 ((device_connect->device_version_bcd & 0x00f0) >> 4) * 10 + 1681 ((device_connect->device_version_bcd & 0x000f) >> 0), 1682 device_connect->device_class); 1683 } else { 1684 INFO("attaching %s device %04x:%04x class %02x\n", speed, 1685 device_connect->vendor_id, device_connect->product_id, 1686 device_connect->device_class); 1687 } 1688 1689 dev->dev.speedmask = (1 << dev->dev.speed) | dev->compatible_speedmask; 1690 dev->device_info = *device_connect; 1691 1692 if (usbredir_check_filter(dev)) { 1693 WARNING("Device %04x:%04x rejected by device filter, not attaching\n", 1694 device_connect->vendor_id, device_connect->product_id); 1695 return; 1696 } 1697 1698 usbredir_check_bulk_receiving(dev); 1699 timer_mod(dev->attach_timer, dev->next_attach_time); 1700 } 1701 1702 static void usbredir_device_disconnect(void *priv) 1703 { 1704 USBRedirDevice *dev = priv; 1705 1706 /* Stop any pending attaches */ 1707 timer_del(dev->attach_timer); 1708 1709 if (dev->dev.attached) { 1710 DPRINTF("detaching device\n"); 1711 usb_device_detach(&dev->dev); 1712 /* 1713 * Delay next usb device attach to give the guest a chance to see 1714 * see the detach / attach in case of quick close / open succession 1715 */ 1716 dev->next_attach_time = qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) + 200; 1717 } 1718 1719 /* Reset state so that the next dev connected starts with a clean slate */ 1720 usbredir_cleanup_device_queues(dev); 1721 usbredir_init_endpoints(dev); 1722 dev->interface_info.interface_count = NO_INTERFACE_INFO; 1723 dev->dev.addr = 0; 1724 dev->dev.speed = 0; 1725 dev->compatible_speedmask = USB_SPEED_MASK_FULL | USB_SPEED_MASK_HIGH; 1726 } 1727 1728 static void usbredir_interface_info(void *priv, 1729 struct usb_redir_interface_info_header *interface_info) 1730 { 1731 USBRedirDevice *dev = priv; 1732 1733 dev->interface_info = *interface_info; 1734 1735 /* 1736 * If we receive interface info after the device has already been 1737 * connected (ie on a set_config), re-check interface dependent things. 1738 */ 1739 if (timer_pending(dev->attach_timer) || dev->dev.attached) { 1740 usbredir_check_bulk_receiving(dev); 1741 if (usbredir_check_filter(dev)) { 1742 ERROR("Device no longer matches filter after interface info " 1743 "change, disconnecting!\n"); 1744 } 1745 } 1746 } 1747 1748 static void usbredir_mark_speed_incompatible(USBRedirDevice *dev, int speed) 1749 { 1750 dev->compatible_speedmask &= ~(1 << speed); 1751 dev->dev.speedmask = (1 << dev->dev.speed) | dev->compatible_speedmask; 1752 } 1753 1754 static void usbredir_set_pipeline(USBRedirDevice *dev, struct USBEndpoint *uep) 1755 { 1756 if (uep->type != USB_ENDPOINT_XFER_BULK) { 1757 return; 1758 } 1759 if (uep->pid == USB_TOKEN_OUT) { 1760 uep->pipeline = true; 1761 } 1762 if (uep->pid == USB_TOKEN_IN && uep->max_packet_size != 0 && 1763 usbredirparser_peer_has_cap(dev->parser, 1764 usb_redir_cap_32bits_bulk_length)) { 1765 uep->pipeline = true; 1766 } 1767 } 1768 1769 static void usbredir_setup_usb_eps(USBRedirDevice *dev) 1770 { 1771 struct USBEndpoint *usb_ep; 1772 int i; 1773 1774 for (i = 0; i < MAX_ENDPOINTS; i++) { 1775 usb_ep = I2USBEP(dev, i); 1776 usb_ep->type = dev->endpoint[i].type; 1777 usb_ep->ifnum = dev->endpoint[i].interface; 1778 usb_ep->max_packet_size = dev->endpoint[i].max_packet_size; 1779 usb_ep->max_streams = dev->endpoint[i].max_streams; 1780 usbredir_set_pipeline(dev, usb_ep); 1781 } 1782 } 1783 1784 static void usbredir_ep_info(void *priv, 1785 struct usb_redir_ep_info_header *ep_info) 1786 { 1787 USBRedirDevice *dev = priv; 1788 int i; 1789 1790 assert(dev != NULL); 1791 for (i = 0; i < MAX_ENDPOINTS; i++) { 1792 dev->endpoint[i].type = ep_info->type[i]; 1793 dev->endpoint[i].interval = ep_info->interval[i]; 1794 dev->endpoint[i].interface = ep_info->interface[i]; 1795 if (usbredirparser_peer_has_cap(dev->parser, 1796 usb_redir_cap_ep_info_max_packet_size)) { 1797 dev->endpoint[i].max_packet_size = ep_info->max_packet_size[i]; 1798 } 1799 #if USBREDIR_VERSION >= 0x000700 1800 if (usbredirparser_peer_has_cap(dev->parser, 1801 usb_redir_cap_bulk_streams)) { 1802 dev->endpoint[i].max_streams = ep_info->max_streams[i]; 1803 } 1804 #endif 1805 switch (dev->endpoint[i].type) { 1806 case usb_redir_type_invalid: 1807 break; 1808 case usb_redir_type_iso: 1809 usbredir_mark_speed_incompatible(dev, USB_SPEED_FULL); 1810 usbredir_mark_speed_incompatible(dev, USB_SPEED_HIGH); 1811 /* Fall through */ 1812 case usb_redir_type_interrupt: 1813 if (!usbredirparser_peer_has_cap(dev->parser, 1814 usb_redir_cap_ep_info_max_packet_size) || 1815 ep_info->max_packet_size[i] > 64) { 1816 usbredir_mark_speed_incompatible(dev, USB_SPEED_FULL); 1817 } 1818 if (!usbredirparser_peer_has_cap(dev->parser, 1819 usb_redir_cap_ep_info_max_packet_size) || 1820 ep_info->max_packet_size[i] > 1024) { 1821 usbredir_mark_speed_incompatible(dev, USB_SPEED_HIGH); 1822 } 1823 if (dev->endpoint[i].interval == 0) { 1824 ERROR("Received 0 interval for isoc or irq endpoint\n"); 1825 usbredir_reject_device(dev); 1826 return; 1827 } 1828 /* Fall through */ 1829 case usb_redir_type_control: 1830 case usb_redir_type_bulk: 1831 DPRINTF("ep: %02X type: %d interface: %d\n", I2EP(i), 1832 dev->endpoint[i].type, dev->endpoint[i].interface); 1833 break; 1834 default: 1835 ERROR("Received invalid endpoint type\n"); 1836 usbredir_reject_device(dev); 1837 return; 1838 } 1839 } 1840 /* The new ep info may have caused a speed incompatibility, recheck */ 1841 if (dev->dev.attached && 1842 !(dev->dev.port->speedmask & dev->dev.speedmask)) { 1843 ERROR("Device no longer matches speed after endpoint info change, " 1844 "disconnecting!\n"); 1845 usbredir_reject_device(dev); 1846 return; 1847 } 1848 usbredir_setup_usb_eps(dev); 1849 usbredir_check_bulk_receiving(dev); 1850 } 1851 1852 static void usbredir_configuration_status(void *priv, uint64_t id, 1853 struct usb_redir_configuration_status_header *config_status) 1854 { 1855 USBRedirDevice *dev = priv; 1856 USBPacket *p; 1857 1858 DPRINTF("set config status %d config %d id %"PRIu64"\n", 1859 config_status->status, config_status->configuration, id); 1860 1861 p = usbredir_find_packet_by_id(dev, 0, id); 1862 if (p) { 1863 if (dev->dev.setup_buf[0] & USB_DIR_IN) { 1864 dev->dev.data_buf[0] = config_status->configuration; 1865 p->actual_length = 1; 1866 } 1867 usbredir_handle_status(dev, p, config_status->status); 1868 usb_generic_async_ctrl_complete(&dev->dev, p); 1869 } 1870 } 1871 1872 static void usbredir_alt_setting_status(void *priv, uint64_t id, 1873 struct usb_redir_alt_setting_status_header *alt_setting_status) 1874 { 1875 USBRedirDevice *dev = priv; 1876 USBPacket *p; 1877 1878 DPRINTF("alt status %d intf %d alt %d id: %"PRIu64"\n", 1879 alt_setting_status->status, alt_setting_status->interface, 1880 alt_setting_status->alt, id); 1881 1882 p = usbredir_find_packet_by_id(dev, 0, id); 1883 if (p) { 1884 if (dev->dev.setup_buf[0] & USB_DIR_IN) { 1885 dev->dev.data_buf[0] = alt_setting_status->alt; 1886 p->actual_length = 1; 1887 } 1888 usbredir_handle_status(dev, p, alt_setting_status->status); 1889 usb_generic_async_ctrl_complete(&dev->dev, p); 1890 } 1891 } 1892 1893 static void usbredir_iso_stream_status(void *priv, uint64_t id, 1894 struct usb_redir_iso_stream_status_header *iso_stream_status) 1895 { 1896 USBRedirDevice *dev = priv; 1897 uint8_t ep = iso_stream_status->endpoint; 1898 1899 DPRINTF("iso status %d ep %02X id %"PRIu64"\n", iso_stream_status->status, 1900 ep, id); 1901 1902 if (!dev->dev.attached || !dev->endpoint[EP2I(ep)].iso_started) { 1903 return; 1904 } 1905 1906 dev->endpoint[EP2I(ep)].iso_error = iso_stream_status->status; 1907 if (iso_stream_status->status == usb_redir_stall) { 1908 DPRINTF("iso stream stopped by peer ep %02X\n", ep); 1909 dev->endpoint[EP2I(ep)].iso_started = 0; 1910 } 1911 } 1912 1913 static void usbredir_interrupt_receiving_status(void *priv, uint64_t id, 1914 struct usb_redir_interrupt_receiving_status_header 1915 *interrupt_receiving_status) 1916 { 1917 USBRedirDevice *dev = priv; 1918 uint8_t ep = interrupt_receiving_status->endpoint; 1919 1920 DPRINTF("interrupt recv status %d ep %02X id %"PRIu64"\n", 1921 interrupt_receiving_status->status, ep, id); 1922 1923 if (!dev->dev.attached || !dev->endpoint[EP2I(ep)].interrupt_started) { 1924 return; 1925 } 1926 1927 dev->endpoint[EP2I(ep)].interrupt_error = 1928 interrupt_receiving_status->status; 1929 if (interrupt_receiving_status->status == usb_redir_stall) { 1930 DPRINTF("interrupt receiving stopped by peer ep %02X\n", ep); 1931 dev->endpoint[EP2I(ep)].interrupt_started = 0; 1932 } 1933 } 1934 1935 static void usbredir_bulk_streams_status(void *priv, uint64_t id, 1936 struct usb_redir_bulk_streams_status_header *bulk_streams_status) 1937 { 1938 #if USBREDIR_VERSION >= 0x000700 1939 USBRedirDevice *dev = priv; 1940 1941 if (bulk_streams_status->status == usb_redir_success) { 1942 DPRINTF("bulk streams status %d eps %08x\n", 1943 bulk_streams_status->status, bulk_streams_status->endpoints); 1944 } else { 1945 ERROR("bulk streams %s failed status %d eps %08x\n", 1946 (bulk_streams_status->no_streams == 0) ? "free" : "alloc", 1947 bulk_streams_status->status, bulk_streams_status->endpoints); 1948 ERROR("usb-redir-host does not provide streams, disconnecting\n"); 1949 usbredir_reject_device(dev); 1950 } 1951 #endif 1952 } 1953 1954 static void usbredir_bulk_receiving_status(void *priv, uint64_t id, 1955 struct usb_redir_bulk_receiving_status_header *bulk_receiving_status) 1956 { 1957 USBRedirDevice *dev = priv; 1958 uint8_t ep = bulk_receiving_status->endpoint; 1959 1960 DPRINTF("bulk recv status %d ep %02X id %"PRIu64"\n", 1961 bulk_receiving_status->status, ep, id); 1962 1963 if (!dev->dev.attached || !dev->endpoint[EP2I(ep)].bulk_receiving_started) { 1964 return; 1965 } 1966 1967 if (bulk_receiving_status->status == usb_redir_stall) { 1968 DPRINTF("bulk receiving stopped by peer ep %02X\n", ep); 1969 dev->endpoint[EP2I(ep)].bulk_receiving_started = 0; 1970 } 1971 } 1972 1973 static void usbredir_control_packet(void *priv, uint64_t id, 1974 struct usb_redir_control_packet_header *control_packet, 1975 uint8_t *data, int data_len) 1976 { 1977 USBRedirDevice *dev = priv; 1978 USBPacket *p; 1979 int len = control_packet->length; 1980 1981 DPRINTF("ctrl-in status %d len %d id %"PRIu64"\n", control_packet->status, 1982 len, id); 1983 1984 /* Fix up USB-3 ep0 maxpacket size to allow superspeed connected devices 1985 * to work redirected to a not superspeed capable hcd */ 1986 if (dev->dev.speed == USB_SPEED_SUPER && 1987 !((dev->dev.port->speedmask & USB_SPEED_MASK_SUPER)) && 1988 control_packet->requesttype == 0x80 && 1989 control_packet->request == 6 && 1990 control_packet->value == 0x100 && control_packet->index == 0 && 1991 data_len >= 18 && data[7] == 9) { 1992 data[7] = 64; 1993 } 1994 1995 p = usbredir_find_packet_by_id(dev, 0, id); 1996 if (p) { 1997 usbredir_handle_status(dev, p, control_packet->status); 1998 if (data_len > 0) { 1999 usbredir_log_data(dev, "ctrl data in:", data, data_len); 2000 if (data_len > sizeof(dev->dev.data_buf)) { 2001 ERROR("ctrl buffer too small (%d > %zu)\n", 2002 data_len, sizeof(dev->dev.data_buf)); 2003 p->status = USB_RET_STALL; 2004 data_len = len = sizeof(dev->dev.data_buf); 2005 } 2006 memcpy(dev->dev.data_buf, data, data_len); 2007 } 2008 p->actual_length = len; 2009 /* 2010 * If this is GET_DESCRIPTOR request for configuration descriptor, 2011 * remove 'remote wakeup' flag from it to prevent idle power down 2012 * in Windows guest 2013 */ 2014 if (dev->suppress_remote_wake && 2015 control_packet->requesttype == USB_DIR_IN && 2016 control_packet->request == USB_REQ_GET_DESCRIPTOR && 2017 control_packet->value == (USB_DT_CONFIG << 8) && 2018 control_packet->index == 0 && 2019 /* bmAttributes field of config descriptor */ 2020 len > 7 && (dev->dev.data_buf[7] & USB_CFG_ATT_WAKEUP)) { 2021 DPRINTF("Removed remote wake %04X:%04X\n", 2022 dev->device_info.vendor_id, 2023 dev->device_info.product_id); 2024 dev->dev.data_buf[7] &= ~USB_CFG_ATT_WAKEUP; 2025 } 2026 usb_generic_async_ctrl_complete(&dev->dev, p); 2027 } 2028 free(data); 2029 } 2030 2031 static void usbredir_bulk_packet(void *priv, uint64_t id, 2032 struct usb_redir_bulk_packet_header *bulk_packet, 2033 uint8_t *data, int data_len) 2034 { 2035 USBRedirDevice *dev = priv; 2036 uint8_t ep = bulk_packet->endpoint; 2037 int len = (bulk_packet->length_high << 16) | bulk_packet->length; 2038 USBPacket *p; 2039 2040 DPRINTF("bulk-in status %d ep %02X stream %u len %d id %"PRIu64"\n", 2041 bulk_packet->status, ep, bulk_packet->stream_id, len, id); 2042 2043 p = usbredir_find_packet_by_id(dev, ep, id); 2044 if (p) { 2045 size_t size = usb_packet_size(p); 2046 usbredir_handle_status(dev, p, bulk_packet->status); 2047 if (data_len > 0) { 2048 usbredir_log_data(dev, "bulk data in:", data, data_len); 2049 if (data_len > size) { 2050 ERROR("bulk got more data then requested (%d > %zd)\n", 2051 data_len, p->iov.size); 2052 p->status = USB_RET_BABBLE; 2053 data_len = len = size; 2054 } 2055 usb_packet_copy(p, data, data_len); 2056 } 2057 p->actual_length = len; 2058 if (p->pid == USB_TOKEN_IN && p->ep->pipeline) { 2059 usb_combined_input_packet_complete(&dev->dev, p); 2060 } else { 2061 usb_packet_complete(&dev->dev, p); 2062 } 2063 } 2064 free(data); 2065 } 2066 2067 static void usbredir_iso_packet(void *priv, uint64_t id, 2068 struct usb_redir_iso_packet_header *iso_packet, 2069 uint8_t *data, int data_len) 2070 { 2071 USBRedirDevice *dev = priv; 2072 uint8_t ep = iso_packet->endpoint; 2073 2074 DPRINTF2("iso-in status %d ep %02X len %d id %"PRIu64"\n", 2075 iso_packet->status, ep, data_len, id); 2076 2077 if (dev->endpoint[EP2I(ep)].type != USB_ENDPOINT_XFER_ISOC) { 2078 ERROR("received iso packet for non iso endpoint %02X\n", ep); 2079 free(data); 2080 return; 2081 } 2082 2083 if (dev->endpoint[EP2I(ep)].iso_started == 0) { 2084 DPRINTF("received iso packet for non started stream ep %02X\n", ep); 2085 free(data); 2086 return; 2087 } 2088 2089 /* bufp_alloc also adds the packet to the ep queue */ 2090 bufp_alloc(dev, data, data_len, iso_packet->status, ep, data); 2091 } 2092 2093 static void usbredir_interrupt_packet(void *priv, uint64_t id, 2094 struct usb_redir_interrupt_packet_header *interrupt_packet, 2095 uint8_t *data, int data_len) 2096 { 2097 USBRedirDevice *dev = priv; 2098 uint8_t ep = interrupt_packet->endpoint; 2099 2100 DPRINTF("interrupt-in status %d ep %02X len %d id %"PRIu64"\n", 2101 interrupt_packet->status, ep, data_len, id); 2102 2103 if (dev->endpoint[EP2I(ep)].type != USB_ENDPOINT_XFER_INT) { 2104 ERROR("received int packet for non interrupt endpoint %02X\n", ep); 2105 free(data); 2106 return; 2107 } 2108 2109 if (ep & USB_DIR_IN) { 2110 if (dev->endpoint[EP2I(ep)].interrupt_started == 0) { 2111 DPRINTF("received int packet while not started ep %02X\n", ep); 2112 free(data); 2113 return; 2114 } 2115 2116 /* bufp_alloc also adds the packet to the ep queue */ 2117 bufp_alloc(dev, data, data_len, interrupt_packet->status, ep, data); 2118 2119 /* insufficient data solved with USB_RET_NAK */ 2120 usb_wakeup(usb_ep_get(&dev->dev, USB_TOKEN_IN, ep & 0x0f), 0); 2121 } else { 2122 /* 2123 * We report output interrupt packets as completed directly upon 2124 * submission, so all we can do here if one failed is warn. 2125 */ 2126 if (interrupt_packet->status) { 2127 WARNING("interrupt output failed status %d ep %02X id %"PRIu64"\n", 2128 interrupt_packet->status, ep, id); 2129 } 2130 } 2131 } 2132 2133 static void usbredir_buffered_bulk_packet(void *priv, uint64_t id, 2134 struct usb_redir_buffered_bulk_packet_header *buffered_bulk_packet, 2135 uint8_t *data, int data_len) 2136 { 2137 USBRedirDevice *dev = priv; 2138 uint8_t status, ep = buffered_bulk_packet->endpoint; 2139 void *free_on_destroy; 2140 int i, len; 2141 2142 DPRINTF("buffered-bulk-in status %d ep %02X len %d id %"PRIu64"\n", 2143 buffered_bulk_packet->status, ep, data_len, id); 2144 2145 if (dev->endpoint[EP2I(ep)].type != USB_ENDPOINT_XFER_BULK) { 2146 ERROR("received buffered-bulk packet for non bulk ep %02X\n", ep); 2147 free(data); 2148 return; 2149 } 2150 2151 if (dev->endpoint[EP2I(ep)].bulk_receiving_started == 0) { 2152 DPRINTF("received buffered-bulk packet on not started ep %02X\n", ep); 2153 free(data); 2154 return; 2155 } 2156 2157 /* Data must be in maxp chunks for buffered_bulk_add_*_data_to_packet */ 2158 len = dev->endpoint[EP2I(ep)].max_packet_size; 2159 status = usb_redir_success; 2160 free_on_destroy = NULL; 2161 for (i = 0; i < data_len; i += len) { 2162 int r; 2163 if (len >= (data_len - i)) { 2164 len = data_len - i; 2165 status = buffered_bulk_packet->status; 2166 free_on_destroy = data; 2167 } 2168 /* bufp_alloc also adds the packet to the ep queue */ 2169 r = bufp_alloc(dev, data + i, len, status, ep, free_on_destroy); 2170 if (r) { 2171 break; 2172 } 2173 } 2174 2175 if (dev->endpoint[EP2I(ep)].pending_async_packet) { 2176 USBPacket *p = dev->endpoint[EP2I(ep)].pending_async_packet; 2177 dev->endpoint[EP2I(ep)].pending_async_packet = NULL; 2178 usbredir_buffered_bulk_in_complete(dev, p, ep); 2179 usb_packet_complete(&dev->dev, p); 2180 } 2181 } 2182 2183 /* 2184 * Migration code 2185 */ 2186 2187 static int usbredir_pre_save(void *priv) 2188 { 2189 USBRedirDevice *dev = priv; 2190 2191 usbredir_fill_already_in_flight(dev); 2192 2193 return 0; 2194 } 2195 2196 static int usbredir_post_load(void *priv, int version_id) 2197 { 2198 USBRedirDevice *dev = priv; 2199 2200 if (dev == NULL || dev->parser == NULL) { 2201 return 0; 2202 } 2203 2204 switch (dev->device_info.speed) { 2205 case usb_redir_speed_low: 2206 dev->dev.speed = USB_SPEED_LOW; 2207 break; 2208 case usb_redir_speed_full: 2209 dev->dev.speed = USB_SPEED_FULL; 2210 break; 2211 case usb_redir_speed_high: 2212 dev->dev.speed = USB_SPEED_HIGH; 2213 break; 2214 case usb_redir_speed_super: 2215 dev->dev.speed = USB_SPEED_SUPER; 2216 break; 2217 default: 2218 dev->dev.speed = USB_SPEED_FULL; 2219 } 2220 dev->dev.speedmask = (1 << dev->dev.speed); 2221 2222 usbredir_setup_usb_eps(dev); 2223 usbredir_check_bulk_receiving(dev); 2224 2225 return 0; 2226 } 2227 2228 /* For usbredirparser migration */ 2229 static int usbredir_put_parser(QEMUFile *f, void *priv, size_t unused, 2230 const VMStateField *field, JSONWriter *vmdesc) 2231 { 2232 USBRedirDevice *dev = priv; 2233 uint8_t *data; 2234 int len; 2235 2236 if (dev->parser == NULL) { 2237 qemu_put_be32(f, 0); 2238 return 0; 2239 } 2240 2241 usbredirparser_serialize(dev->parser, &data, &len); 2242 qemu_oom_check(data); 2243 2244 qemu_put_be32(f, len); 2245 qemu_put_buffer(f, data, len); 2246 2247 free(data); 2248 2249 return 0; 2250 } 2251 2252 static int usbredir_get_parser(QEMUFile *f, void *priv, size_t unused, 2253 const VMStateField *field) 2254 { 2255 USBRedirDevice *dev = priv; 2256 uint8_t *data; 2257 int len, ret; 2258 2259 len = qemu_get_be32(f); 2260 if (len == 0) { 2261 return 0; 2262 } 2263 2264 /* 2265 * If our chardev is not open already at this point the usbredir connection 2266 * has been broken (non seamless migration, or restore from disk). 2267 * 2268 * In this case create a temporary parser to receive the migration data, 2269 * and schedule the close_bh to report the device as disconnected to the 2270 * guest and to destroy the parser again. 2271 */ 2272 if (dev->parser == NULL) { 2273 WARNING("usb-redir connection broken during migration\n"); 2274 usbredir_create_parser(dev); 2275 qemu_bh_schedule(dev->chardev_close_bh); 2276 } 2277 2278 data = g_malloc(len); 2279 qemu_get_buffer(f, data, len); 2280 2281 ret = usbredirparser_unserialize(dev->parser, data, len); 2282 2283 g_free(data); 2284 2285 return ret; 2286 } 2287 2288 static const VMStateInfo usbredir_parser_vmstate_info = { 2289 .name = "usb-redir-parser", 2290 .put = usbredir_put_parser, 2291 .get = usbredir_get_parser, 2292 }; 2293 2294 2295 /* For buffered packets (iso/irq) queue migration */ 2296 static int usbredir_put_bufpq(QEMUFile *f, void *priv, size_t unused, 2297 const VMStateField *field, JSONWriter *vmdesc) 2298 { 2299 struct endp_data *endp = priv; 2300 USBRedirDevice *dev = endp->dev; 2301 struct buf_packet *bufp; 2302 int len, i = 0; 2303 2304 qemu_put_be32(f, endp->bufpq_size); 2305 QTAILQ_FOREACH(bufp, &endp->bufpq, next) { 2306 len = bufp->len - bufp->offset; 2307 DPRINTF("put_bufpq %d/%d len %d status %d\n", i + 1, endp->bufpq_size, 2308 len, bufp->status); 2309 qemu_put_be32(f, len); 2310 qemu_put_be32(f, bufp->status); 2311 qemu_put_buffer(f, bufp->data + bufp->offset, len); 2312 i++; 2313 } 2314 assert(i == endp->bufpq_size); 2315 2316 return 0; 2317 } 2318 2319 static int usbredir_get_bufpq(QEMUFile *f, void *priv, size_t unused, 2320 const VMStateField *field) 2321 { 2322 struct endp_data *endp = priv; 2323 USBRedirDevice *dev = endp->dev; 2324 struct buf_packet *bufp; 2325 int i; 2326 2327 endp->bufpq_size = qemu_get_be32(f); 2328 for (i = 0; i < endp->bufpq_size; i++) { 2329 bufp = g_new(struct buf_packet, 1); 2330 bufp->len = qemu_get_be32(f); 2331 bufp->status = qemu_get_be32(f); 2332 bufp->offset = 0; 2333 bufp->data = qemu_oom_check(malloc(bufp->len)); /* regular malloc! */ 2334 bufp->free_on_destroy = bufp->data; 2335 qemu_get_buffer(f, bufp->data, bufp->len); 2336 QTAILQ_INSERT_TAIL(&endp->bufpq, bufp, next); 2337 DPRINTF("get_bufpq %d/%d len %d status %d\n", i + 1, endp->bufpq_size, 2338 bufp->len, bufp->status); 2339 } 2340 return 0; 2341 } 2342 2343 static const VMStateInfo usbredir_ep_bufpq_vmstate_info = { 2344 .name = "usb-redir-bufpq", 2345 .put = usbredir_put_bufpq, 2346 .get = usbredir_get_bufpq, 2347 }; 2348 2349 2350 /* For endp_data migration */ 2351 static bool usbredir_bulk_receiving_needed(void *priv) 2352 { 2353 struct endp_data *endp = priv; 2354 2355 return endp->bulk_receiving_started; 2356 } 2357 2358 static const VMStateDescription usbredir_bulk_receiving_vmstate = { 2359 .name = "usb-redir-ep/bulk-receiving", 2360 .version_id = 1, 2361 .minimum_version_id = 1, 2362 .needed = usbredir_bulk_receiving_needed, 2363 .fields = (VMStateField[]) { 2364 VMSTATE_UINT8(bulk_receiving_started, struct endp_data), 2365 VMSTATE_END_OF_LIST() 2366 } 2367 }; 2368 2369 static bool usbredir_stream_needed(void *priv) 2370 { 2371 struct endp_data *endp = priv; 2372 2373 return endp->max_streams; 2374 } 2375 2376 static const VMStateDescription usbredir_stream_vmstate = { 2377 .name = "usb-redir-ep/stream-state", 2378 .version_id = 1, 2379 .minimum_version_id = 1, 2380 .needed = usbredir_stream_needed, 2381 .fields = (VMStateField[]) { 2382 VMSTATE_UINT32(max_streams, struct endp_data), 2383 VMSTATE_END_OF_LIST() 2384 } 2385 }; 2386 2387 static const VMStateDescription usbredir_ep_vmstate = { 2388 .name = "usb-redir-ep", 2389 .version_id = 1, 2390 .minimum_version_id = 1, 2391 .fields = (VMStateField[]) { 2392 VMSTATE_UINT8(type, struct endp_data), 2393 VMSTATE_UINT8(interval, struct endp_data), 2394 VMSTATE_UINT8(interface, struct endp_data), 2395 VMSTATE_UINT16(max_packet_size, struct endp_data), 2396 VMSTATE_UINT8(iso_started, struct endp_data), 2397 VMSTATE_UINT8(iso_error, struct endp_data), 2398 VMSTATE_UINT8(interrupt_started, struct endp_data), 2399 VMSTATE_UINT8(interrupt_error, struct endp_data), 2400 VMSTATE_UINT8(bufpq_prefilled, struct endp_data), 2401 VMSTATE_UINT8(bufpq_dropping_packets, struct endp_data), 2402 { 2403 .name = "bufpq", 2404 .version_id = 0, 2405 .field_exists = NULL, 2406 .size = 0, 2407 .info = &usbredir_ep_bufpq_vmstate_info, 2408 .flags = VMS_SINGLE, 2409 .offset = 0, 2410 }, 2411 VMSTATE_INT32(bufpq_target_size, struct endp_data), 2412 VMSTATE_END_OF_LIST() 2413 }, 2414 .subsections = (const VMStateDescription*[]) { 2415 &usbredir_bulk_receiving_vmstate, 2416 &usbredir_stream_vmstate, 2417 NULL 2418 } 2419 }; 2420 2421 2422 /* For PacketIdQueue migration */ 2423 static int usbredir_put_packet_id_q(QEMUFile *f, void *priv, size_t unused, 2424 const VMStateField *field, 2425 JSONWriter *vmdesc) 2426 { 2427 struct PacketIdQueue *q = priv; 2428 USBRedirDevice *dev = q->dev; 2429 struct PacketIdQueueEntry *e; 2430 int remain = q->size; 2431 2432 DPRINTF("put_packet_id_q %s size %d\n", q->name, q->size); 2433 qemu_put_be32(f, q->size); 2434 QTAILQ_FOREACH(e, &q->head, next) { 2435 qemu_put_be64(f, e->id); 2436 remain--; 2437 } 2438 assert(remain == 0); 2439 2440 return 0; 2441 } 2442 2443 static int usbredir_get_packet_id_q(QEMUFile *f, void *priv, size_t unused, 2444 const VMStateField *field) 2445 { 2446 struct PacketIdQueue *q = priv; 2447 USBRedirDevice *dev = q->dev; 2448 int i, size; 2449 uint64_t id; 2450 2451 size = qemu_get_be32(f); 2452 DPRINTF("get_packet_id_q %s size %d\n", q->name, size); 2453 for (i = 0; i < size; i++) { 2454 id = qemu_get_be64(f); 2455 packet_id_queue_add(q, id); 2456 } 2457 assert(q->size == size); 2458 return 0; 2459 } 2460 2461 static const VMStateInfo usbredir_ep_packet_id_q_vmstate_info = { 2462 .name = "usb-redir-packet-id-q", 2463 .put = usbredir_put_packet_id_q, 2464 .get = usbredir_get_packet_id_q, 2465 }; 2466 2467 static const VMStateDescription usbredir_ep_packet_id_queue_vmstate = { 2468 .name = "usb-redir-packet-id-queue", 2469 .version_id = 1, 2470 .minimum_version_id = 1, 2471 .fields = (VMStateField[]) { 2472 { 2473 .name = "queue", 2474 .version_id = 0, 2475 .field_exists = NULL, 2476 .size = 0, 2477 .info = &usbredir_ep_packet_id_q_vmstate_info, 2478 .flags = VMS_SINGLE, 2479 .offset = 0, 2480 }, 2481 VMSTATE_END_OF_LIST() 2482 } 2483 }; 2484 2485 2486 /* For usb_redir_device_connect_header migration */ 2487 static const VMStateDescription usbredir_device_info_vmstate = { 2488 .name = "usb-redir-device-info", 2489 .version_id = 1, 2490 .minimum_version_id = 1, 2491 .fields = (VMStateField[]) { 2492 VMSTATE_UINT8(speed, struct usb_redir_device_connect_header), 2493 VMSTATE_UINT8(device_class, struct usb_redir_device_connect_header), 2494 VMSTATE_UINT8(device_subclass, struct usb_redir_device_connect_header), 2495 VMSTATE_UINT8(device_protocol, struct usb_redir_device_connect_header), 2496 VMSTATE_UINT16(vendor_id, struct usb_redir_device_connect_header), 2497 VMSTATE_UINT16(product_id, struct usb_redir_device_connect_header), 2498 VMSTATE_UINT16(device_version_bcd, 2499 struct usb_redir_device_connect_header), 2500 VMSTATE_END_OF_LIST() 2501 } 2502 }; 2503 2504 2505 /* For usb_redir_interface_info_header migration */ 2506 static const VMStateDescription usbredir_interface_info_vmstate = { 2507 .name = "usb-redir-interface-info", 2508 .version_id = 1, 2509 .minimum_version_id = 1, 2510 .fields = (VMStateField[]) { 2511 VMSTATE_UINT32(interface_count, 2512 struct usb_redir_interface_info_header), 2513 VMSTATE_UINT8_ARRAY(interface, 2514 struct usb_redir_interface_info_header, 32), 2515 VMSTATE_UINT8_ARRAY(interface_class, 2516 struct usb_redir_interface_info_header, 32), 2517 VMSTATE_UINT8_ARRAY(interface_subclass, 2518 struct usb_redir_interface_info_header, 32), 2519 VMSTATE_UINT8_ARRAY(interface_protocol, 2520 struct usb_redir_interface_info_header, 32), 2521 VMSTATE_END_OF_LIST() 2522 } 2523 }; 2524 2525 2526 /* And finally the USBRedirDevice vmstate itself */ 2527 static const VMStateDescription usbredir_vmstate = { 2528 .name = "usb-redir", 2529 .version_id = 1, 2530 .minimum_version_id = 1, 2531 .pre_save = usbredir_pre_save, 2532 .post_load = usbredir_post_load, 2533 .fields = (VMStateField[]) { 2534 VMSTATE_USB_DEVICE(dev, USBRedirDevice), 2535 VMSTATE_TIMER_PTR(attach_timer, USBRedirDevice), 2536 { 2537 .name = "parser", 2538 .version_id = 0, 2539 .field_exists = NULL, 2540 .size = 0, 2541 .info = &usbredir_parser_vmstate_info, 2542 .flags = VMS_SINGLE, 2543 .offset = 0, 2544 }, 2545 VMSTATE_STRUCT_ARRAY(endpoint, USBRedirDevice, MAX_ENDPOINTS, 1, 2546 usbredir_ep_vmstate, struct endp_data), 2547 VMSTATE_STRUCT(cancelled, USBRedirDevice, 1, 2548 usbredir_ep_packet_id_queue_vmstate, 2549 struct PacketIdQueue), 2550 VMSTATE_STRUCT(already_in_flight, USBRedirDevice, 1, 2551 usbredir_ep_packet_id_queue_vmstate, 2552 struct PacketIdQueue), 2553 VMSTATE_STRUCT(device_info, USBRedirDevice, 1, 2554 usbredir_device_info_vmstate, 2555 struct usb_redir_device_connect_header), 2556 VMSTATE_STRUCT(interface_info, USBRedirDevice, 1, 2557 usbredir_interface_info_vmstate, 2558 struct usb_redir_interface_info_header), 2559 VMSTATE_END_OF_LIST() 2560 } 2561 }; 2562 2563 static Property usbredir_properties[] = { 2564 DEFINE_PROP_CHR("chardev", USBRedirDevice, cs), 2565 DEFINE_PROP_UINT8("debug", USBRedirDevice, debug, usbredirparser_warning), 2566 DEFINE_PROP_STRING("filter", USBRedirDevice, filter_str), 2567 DEFINE_PROP_BOOL("streams", USBRedirDevice, enable_streams, true), 2568 DEFINE_PROP_BOOL("suppress-remote-wake", USBRedirDevice, 2569 suppress_remote_wake, true), 2570 DEFINE_PROP_END_OF_LIST(), 2571 }; 2572 2573 static void usbredir_class_initfn(ObjectClass *klass, void *data) 2574 { 2575 USBDeviceClass *uc = USB_DEVICE_CLASS(klass); 2576 DeviceClass *dc = DEVICE_CLASS(klass); 2577 2578 uc->realize = usbredir_realize; 2579 uc->product_desc = "USB Redirection Device"; 2580 uc->unrealize = usbredir_unrealize; 2581 uc->cancel_packet = usbredir_cancel_packet; 2582 uc->handle_reset = usbredir_handle_reset; 2583 uc->handle_data = usbredir_handle_data; 2584 uc->handle_control = usbredir_handle_control; 2585 uc->flush_ep_queue = usbredir_flush_ep_queue; 2586 uc->ep_stopped = usbredir_ep_stopped; 2587 uc->alloc_streams = usbredir_alloc_streams; 2588 uc->free_streams = usbredir_free_streams; 2589 dc->vmsd = &usbredir_vmstate; 2590 device_class_set_props(dc, usbredir_properties); 2591 set_bit(DEVICE_CATEGORY_MISC, dc->categories); 2592 } 2593 2594 static void usbredir_instance_init(Object *obj) 2595 { 2596 USBDevice *udev = USB_DEVICE(obj); 2597 USBRedirDevice *dev = USB_REDIRECT(udev); 2598 2599 device_add_bootindex_property(obj, &dev->bootindex, 2600 "bootindex", NULL, 2601 &udev->qdev); 2602 } 2603 2604 static const TypeInfo usbredir_dev_info = { 2605 .name = TYPE_USB_REDIR, 2606 .parent = TYPE_USB_DEVICE, 2607 .instance_size = sizeof(USBRedirDevice), 2608 .class_init = usbredir_class_initfn, 2609 .instance_init = usbredir_instance_init, 2610 }; 2611 2612 static void usbredir_register_types(void) 2613 { 2614 type_register_static(&usbredir_dev_info); 2615 } 2616 2617 type_init(usbredir_register_types) 2618