1 /* 2 * USB redirector usb-guest 3 * 4 * Copyright (c) 2011-2012 Red Hat, Inc. 5 * 6 * Red Hat Authors: 7 * Hans de Goede <hdegoede@redhat.com> 8 * 9 * Permission is hereby granted, free of charge, to any person obtaining a copy 10 * of this software and associated documentation files (the "Software"), to deal 11 * in the Software without restriction, including without limitation the rights 12 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 13 * copies of the Software, and to permit persons to whom the Software is 14 * furnished to do so, subject to the following conditions: 15 * 16 * The above copyright notice and this permission notice shall be included in 17 * all copies or substantial portions of the Software. 18 * 19 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 20 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 21 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 22 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 23 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 24 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 25 * THE SOFTWARE. 26 */ 27 28 #include "qemu/osdep.h" 29 #include "qemu-common.h" 30 #include "qemu/units.h" 31 #include "qapi/error.h" 32 #include "qemu/timer.h" 33 #include "sysemu/runstate.h" 34 #include "sysemu/sysemu.h" 35 #include "qapi/qmp/qerror.h" 36 #include "qemu/error-report.h" 37 #include "qemu/iov.h" 38 #include "qemu/module.h" 39 #include "chardev/char-fe.h" 40 41 #include <usbredirparser.h> 42 #include <usbredirfilter.h> 43 44 #include "hw/qdev-properties.h" 45 #include "hw/usb.h" 46 #include "migration/qemu-file-types.h" 47 #include "migration/vmstate.h" 48 49 /* ERROR is defined below. Remove any previous definition. */ 50 #undef ERROR 51 52 #define MAX_ENDPOINTS 32 53 #define NO_INTERFACE_INFO 255 /* Valid interface_count always <= 32 */ 54 #define EP2I(ep_address) (((ep_address & 0x80) >> 3) | (ep_address & 0x0f)) 55 #define I2EP(i) (((i & 0x10) << 3) | (i & 0x0f)) 56 #define USBEP2I(usb_ep) (((usb_ep)->pid == USB_TOKEN_IN) ? \ 57 ((usb_ep)->nr | 0x10) : ((usb_ep)->nr)) 58 #define I2USBEP(d, i) (usb_ep_get(&(d)->dev, \ 59 ((i) & 0x10) ? USB_TOKEN_IN : USB_TOKEN_OUT, \ 60 (i) & 0x0f)) 61 62 #ifndef USBREDIR_VERSION /* This is not defined in older usbredir versions */ 63 #define USBREDIR_VERSION 0 64 #endif 65 66 typedef struct USBRedirDevice USBRedirDevice; 67 68 /* Struct to hold buffered packets */ 69 struct buf_packet { 70 uint8_t *data; 71 void *free_on_destroy; 72 uint16_t len; 73 uint16_t offset; 74 uint8_t status; 75 QTAILQ_ENTRY(buf_packet)next; 76 }; 77 78 struct endp_data { 79 USBRedirDevice *dev; 80 uint8_t type; 81 uint8_t interval; 82 uint8_t interface; /* bInterfaceNumber this ep belongs to */ 83 uint16_t max_packet_size; /* In bytes, not wMaxPacketSize format !! */ 84 uint32_t max_streams; 85 uint8_t iso_started; 86 uint8_t iso_error; /* For reporting iso errors to the HC */ 87 uint8_t interrupt_started; 88 uint8_t interrupt_error; 89 uint8_t bulk_receiving_enabled; 90 uint8_t bulk_receiving_started; 91 uint8_t bufpq_prefilled; 92 uint8_t bufpq_dropping_packets; 93 QTAILQ_HEAD(, buf_packet) bufpq; 94 int32_t bufpq_size; 95 int32_t bufpq_target_size; 96 USBPacket *pending_async_packet; 97 }; 98 99 struct PacketIdQueueEntry { 100 uint64_t id; 101 QTAILQ_ENTRY(PacketIdQueueEntry)next; 102 }; 103 104 struct PacketIdQueue { 105 USBRedirDevice *dev; 106 const char *name; 107 QTAILQ_HEAD(, PacketIdQueueEntry) head; 108 int size; 109 }; 110 111 struct USBRedirDevice { 112 USBDevice dev; 113 /* Properties */ 114 CharBackend cs; 115 bool enable_streams; 116 bool suppress_remote_wake; 117 bool in_write; 118 uint8_t debug; 119 int32_t bootindex; 120 char *filter_str; 121 /* Data passed from chardev the fd_read cb to the usbredirparser read cb */ 122 const uint8_t *read_buf; 123 int read_buf_size; 124 /* Active chardev-watch-tag */ 125 guint watch; 126 /* For async handling of close / reject */ 127 QEMUBH *chardev_close_bh; 128 QEMUBH *device_reject_bh; 129 /* To delay the usb attach in case of quick chardev close + open */ 130 QEMUTimer *attach_timer; 131 int64_t next_attach_time; 132 struct usbredirparser *parser; 133 struct endp_data endpoint[MAX_ENDPOINTS]; 134 struct PacketIdQueue cancelled; 135 struct PacketIdQueue already_in_flight; 136 void (*buffered_bulk_in_complete)(USBRedirDevice *, USBPacket *, uint8_t); 137 /* Data for device filtering */ 138 struct usb_redir_device_connect_header device_info; 139 struct usb_redir_interface_info_header interface_info; 140 struct usbredirfilter_rule *filter_rules; 141 int filter_rules_count; 142 int compatible_speedmask; 143 VMChangeStateEntry *vmstate; 144 }; 145 146 #define TYPE_USB_REDIR "usb-redir" 147 #define USB_REDIRECT(obj) OBJECT_CHECK(USBRedirDevice, (obj), TYPE_USB_REDIR) 148 149 static void usbredir_hello(void *priv, struct usb_redir_hello_header *h); 150 static void usbredir_device_connect(void *priv, 151 struct usb_redir_device_connect_header *device_connect); 152 static void usbredir_device_disconnect(void *priv); 153 static void usbredir_interface_info(void *priv, 154 struct usb_redir_interface_info_header *interface_info); 155 static void usbredir_ep_info(void *priv, 156 struct usb_redir_ep_info_header *ep_info); 157 static void usbredir_configuration_status(void *priv, uint64_t id, 158 struct usb_redir_configuration_status_header *configuration_status); 159 static void usbredir_alt_setting_status(void *priv, uint64_t id, 160 struct usb_redir_alt_setting_status_header *alt_setting_status); 161 static void usbredir_iso_stream_status(void *priv, uint64_t id, 162 struct usb_redir_iso_stream_status_header *iso_stream_status); 163 static void usbredir_interrupt_receiving_status(void *priv, uint64_t id, 164 struct usb_redir_interrupt_receiving_status_header 165 *interrupt_receiving_status); 166 static void usbredir_bulk_streams_status(void *priv, uint64_t id, 167 struct usb_redir_bulk_streams_status_header *bulk_streams_status); 168 static void usbredir_bulk_receiving_status(void *priv, uint64_t id, 169 struct usb_redir_bulk_receiving_status_header *bulk_receiving_status); 170 static void usbredir_control_packet(void *priv, uint64_t id, 171 struct usb_redir_control_packet_header *control_packet, 172 uint8_t *data, int data_len); 173 static void usbredir_bulk_packet(void *priv, uint64_t id, 174 struct usb_redir_bulk_packet_header *bulk_packet, 175 uint8_t *data, int data_len); 176 static void usbredir_iso_packet(void *priv, uint64_t id, 177 struct usb_redir_iso_packet_header *iso_packet, 178 uint8_t *data, int data_len); 179 static void usbredir_interrupt_packet(void *priv, uint64_t id, 180 struct usb_redir_interrupt_packet_header *interrupt_header, 181 uint8_t *data, int data_len); 182 static void usbredir_buffered_bulk_packet(void *priv, uint64_t id, 183 struct usb_redir_buffered_bulk_packet_header *buffered_bulk_packet, 184 uint8_t *data, int data_len); 185 186 static void usbredir_handle_status(USBRedirDevice *dev, USBPacket *p, 187 int status); 188 189 #define VERSION "qemu usb-redir guest " QEMU_VERSION 190 191 /* 192 * Logging stuff 193 */ 194 195 #define ERROR(...) \ 196 do { \ 197 if (dev->debug >= usbredirparser_error) { \ 198 error_report("usb-redir error: " __VA_ARGS__); \ 199 } \ 200 } while (0) 201 #define WARNING(...) \ 202 do { \ 203 if (dev->debug >= usbredirparser_warning) { \ 204 warn_report("" __VA_ARGS__); \ 205 } \ 206 } while (0) 207 #define INFO(...) \ 208 do { \ 209 if (dev->debug >= usbredirparser_info) { \ 210 error_report("usb-redir: " __VA_ARGS__); \ 211 } \ 212 } while (0) 213 #define DPRINTF(...) \ 214 do { \ 215 if (dev->debug >= usbredirparser_debug) { \ 216 error_report("usb-redir: " __VA_ARGS__); \ 217 } \ 218 } while (0) 219 #define DPRINTF2(...) \ 220 do { \ 221 if (dev->debug >= usbredirparser_debug_data) { \ 222 error_report("usb-redir: " __VA_ARGS__); \ 223 } \ 224 } while (0) 225 226 static void usbredir_log(void *priv, int level, const char *msg) 227 { 228 USBRedirDevice *dev = priv; 229 230 if (dev->debug < level) { 231 return; 232 } 233 234 error_report("%s", msg); 235 } 236 237 static void usbredir_log_data(USBRedirDevice *dev, const char *desc, 238 const uint8_t *data, int len) 239 { 240 if (dev->debug < usbredirparser_debug_data) { 241 return; 242 } 243 qemu_hexdump((char *)data, stderr, desc, len); 244 } 245 246 /* 247 * usbredirparser io functions 248 */ 249 250 static int usbredir_read(void *priv, uint8_t *data, int count) 251 { 252 USBRedirDevice *dev = priv; 253 254 if (dev->read_buf_size < count) { 255 count = dev->read_buf_size; 256 } 257 258 memcpy(data, dev->read_buf, count); 259 260 dev->read_buf_size -= count; 261 if (dev->read_buf_size) { 262 dev->read_buf += count; 263 } else { 264 dev->read_buf = NULL; 265 } 266 267 return count; 268 } 269 270 static gboolean usbredir_write_unblocked(GIOChannel *chan, GIOCondition cond, 271 void *opaque) 272 { 273 USBRedirDevice *dev = opaque; 274 275 dev->watch = 0; 276 usbredirparser_do_write(dev->parser); 277 278 return FALSE; 279 } 280 281 static int usbredir_write(void *priv, uint8_t *data, int count) 282 { 283 USBRedirDevice *dev = priv; 284 int r; 285 286 if (!qemu_chr_fe_backend_open(&dev->cs)) { 287 return 0; 288 } 289 290 /* Don't send new data to the chardev until our state is fully synced */ 291 if (!runstate_check(RUN_STATE_RUNNING)) { 292 return 0; 293 } 294 295 /* Recursion check */ 296 if (dev->in_write) { 297 DPRINTF("usbredir_write recursion\n"); 298 return 0; 299 } 300 dev->in_write = true; 301 302 r = qemu_chr_fe_write(&dev->cs, data, count); 303 if (r < count) { 304 if (!dev->watch) { 305 dev->watch = qemu_chr_fe_add_watch(&dev->cs, G_IO_OUT | G_IO_HUP, 306 usbredir_write_unblocked, dev); 307 } 308 if (r < 0) { 309 r = 0; 310 } 311 } 312 dev->in_write = false; 313 return r; 314 } 315 316 /* 317 * Cancelled and buffered packets helpers 318 */ 319 320 static void packet_id_queue_init(struct PacketIdQueue *q, 321 USBRedirDevice *dev, const char *name) 322 { 323 q->dev = dev; 324 q->name = name; 325 QTAILQ_INIT(&q->head); 326 q->size = 0; 327 } 328 329 static void packet_id_queue_add(struct PacketIdQueue *q, uint64_t id) 330 { 331 USBRedirDevice *dev = q->dev; 332 struct PacketIdQueueEntry *e; 333 334 DPRINTF("adding packet id %"PRIu64" to %s queue\n", id, q->name); 335 336 e = g_new0(struct PacketIdQueueEntry, 1); 337 e->id = id; 338 QTAILQ_INSERT_TAIL(&q->head, e, next); 339 q->size++; 340 } 341 342 static int packet_id_queue_remove(struct PacketIdQueue *q, uint64_t id) 343 { 344 USBRedirDevice *dev = q->dev; 345 struct PacketIdQueueEntry *e; 346 347 QTAILQ_FOREACH(e, &q->head, next) { 348 if (e->id == id) { 349 DPRINTF("removing packet id %"PRIu64" from %s queue\n", 350 id, q->name); 351 QTAILQ_REMOVE(&q->head, e, next); 352 q->size--; 353 g_free(e); 354 return 1; 355 } 356 } 357 return 0; 358 } 359 360 static void packet_id_queue_empty(struct PacketIdQueue *q) 361 { 362 USBRedirDevice *dev = q->dev; 363 struct PacketIdQueueEntry *e, *next_e; 364 365 DPRINTF("removing %d packet-ids from %s queue\n", q->size, q->name); 366 367 QTAILQ_FOREACH_SAFE(e, &q->head, next, next_e) { 368 QTAILQ_REMOVE(&q->head, e, next); 369 g_free(e); 370 } 371 q->size = 0; 372 } 373 374 static void usbredir_cancel_packet(USBDevice *udev, USBPacket *p) 375 { 376 USBRedirDevice *dev = USB_REDIRECT(udev); 377 int i = USBEP2I(p->ep); 378 379 if (p->combined) { 380 usb_combined_packet_cancel(udev, p); 381 return; 382 } 383 384 if (dev->endpoint[i].pending_async_packet) { 385 assert(dev->endpoint[i].pending_async_packet == p); 386 dev->endpoint[i].pending_async_packet = NULL; 387 return; 388 } 389 390 packet_id_queue_add(&dev->cancelled, p->id); 391 usbredirparser_send_cancel_data_packet(dev->parser, p->id); 392 usbredirparser_do_write(dev->parser); 393 } 394 395 static int usbredir_is_cancelled(USBRedirDevice *dev, uint64_t id) 396 { 397 if (!dev->dev.attached) { 398 return 1; /* Treat everything as cancelled after a disconnect */ 399 } 400 return packet_id_queue_remove(&dev->cancelled, id); 401 } 402 403 static void usbredir_fill_already_in_flight_from_ep(USBRedirDevice *dev, 404 struct USBEndpoint *ep) 405 { 406 static USBPacket *p; 407 408 /* async handled packets for bulk receiving eps do not count as inflight */ 409 if (dev->endpoint[USBEP2I(ep)].bulk_receiving_started) { 410 return; 411 } 412 413 QTAILQ_FOREACH(p, &ep->queue, queue) { 414 /* Skip combined packets, except for the first */ 415 if (p->combined && p != p->combined->first) { 416 continue; 417 } 418 if (p->state == USB_PACKET_ASYNC) { 419 packet_id_queue_add(&dev->already_in_flight, p->id); 420 } 421 } 422 } 423 424 static void usbredir_fill_already_in_flight(USBRedirDevice *dev) 425 { 426 int ep; 427 struct USBDevice *udev = &dev->dev; 428 429 usbredir_fill_already_in_flight_from_ep(dev, &udev->ep_ctl); 430 431 for (ep = 0; ep < USB_MAX_ENDPOINTS; ep++) { 432 usbredir_fill_already_in_flight_from_ep(dev, &udev->ep_in[ep]); 433 usbredir_fill_already_in_flight_from_ep(dev, &udev->ep_out[ep]); 434 } 435 } 436 437 static int usbredir_already_in_flight(USBRedirDevice *dev, uint64_t id) 438 { 439 return packet_id_queue_remove(&dev->already_in_flight, id); 440 } 441 442 static USBPacket *usbredir_find_packet_by_id(USBRedirDevice *dev, 443 uint8_t ep, uint64_t id) 444 { 445 USBPacket *p; 446 447 if (usbredir_is_cancelled(dev, id)) { 448 return NULL; 449 } 450 451 p = usb_ep_find_packet_by_id(&dev->dev, 452 (ep & USB_DIR_IN) ? USB_TOKEN_IN : USB_TOKEN_OUT, 453 ep & 0x0f, id); 454 if (p == NULL) { 455 ERROR("could not find packet with id %"PRIu64"\n", id); 456 } 457 return p; 458 } 459 460 static int bufp_alloc(USBRedirDevice *dev, uint8_t *data, uint16_t len, 461 uint8_t status, uint8_t ep, void *free_on_destroy) 462 { 463 struct buf_packet *bufp; 464 465 if (!dev->endpoint[EP2I(ep)].bufpq_dropping_packets && 466 dev->endpoint[EP2I(ep)].bufpq_size > 467 2 * dev->endpoint[EP2I(ep)].bufpq_target_size) { 468 DPRINTF("bufpq overflow, dropping packets ep %02X\n", ep); 469 dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 1; 470 } 471 /* Since we're interupting the stream anyways, drop enough packets to get 472 back to our target buffer size */ 473 if (dev->endpoint[EP2I(ep)].bufpq_dropping_packets) { 474 if (dev->endpoint[EP2I(ep)].bufpq_size > 475 dev->endpoint[EP2I(ep)].bufpq_target_size) { 476 free(data); 477 return -1; 478 } 479 dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0; 480 } 481 482 bufp = g_new(struct buf_packet, 1); 483 bufp->data = data; 484 bufp->len = len; 485 bufp->offset = 0; 486 bufp->status = status; 487 bufp->free_on_destroy = free_on_destroy; 488 QTAILQ_INSERT_TAIL(&dev->endpoint[EP2I(ep)].bufpq, bufp, next); 489 dev->endpoint[EP2I(ep)].bufpq_size++; 490 return 0; 491 } 492 493 static void bufp_free(USBRedirDevice *dev, struct buf_packet *bufp, 494 uint8_t ep) 495 { 496 QTAILQ_REMOVE(&dev->endpoint[EP2I(ep)].bufpq, bufp, next); 497 dev->endpoint[EP2I(ep)].bufpq_size--; 498 free(bufp->free_on_destroy); 499 g_free(bufp); 500 } 501 502 static void usbredir_free_bufpq(USBRedirDevice *dev, uint8_t ep) 503 { 504 struct buf_packet *buf, *buf_next; 505 506 QTAILQ_FOREACH_SAFE(buf, &dev->endpoint[EP2I(ep)].bufpq, next, buf_next) { 507 bufp_free(dev, buf, ep); 508 } 509 } 510 511 /* 512 * USBDevice callbacks 513 */ 514 515 static void usbredir_handle_reset(USBDevice *udev) 516 { 517 USBRedirDevice *dev = USB_REDIRECT(udev); 518 519 DPRINTF("reset device\n"); 520 usbredirparser_send_reset(dev->parser); 521 usbredirparser_do_write(dev->parser); 522 } 523 524 static void usbredir_handle_iso_data(USBRedirDevice *dev, USBPacket *p, 525 uint8_t ep) 526 { 527 int status, len; 528 if (!dev->endpoint[EP2I(ep)].iso_started && 529 !dev->endpoint[EP2I(ep)].iso_error) { 530 struct usb_redir_start_iso_stream_header start_iso = { 531 .endpoint = ep, 532 }; 533 int pkts_per_sec; 534 535 if (dev->dev.speed == USB_SPEED_HIGH) { 536 pkts_per_sec = 8000 / dev->endpoint[EP2I(ep)].interval; 537 } else { 538 pkts_per_sec = 1000 / dev->endpoint[EP2I(ep)].interval; 539 } 540 /* Testing has shown that we need circa 60 ms buffer */ 541 dev->endpoint[EP2I(ep)].bufpq_target_size = (pkts_per_sec * 60) / 1000; 542 543 /* Aim for approx 100 interrupts / second on the client to 544 balance latency and interrupt load */ 545 start_iso.pkts_per_urb = pkts_per_sec / 100; 546 if (start_iso.pkts_per_urb < 1) { 547 start_iso.pkts_per_urb = 1; 548 } else if (start_iso.pkts_per_urb > 32) { 549 start_iso.pkts_per_urb = 32; 550 } 551 552 start_iso.no_urbs = DIV_ROUND_UP( 553 dev->endpoint[EP2I(ep)].bufpq_target_size, 554 start_iso.pkts_per_urb); 555 /* Output endpoints pre-fill only 1/2 of the packets, keeping the rest 556 as overflow buffer. Also see the usbredir protocol documentation */ 557 if (!(ep & USB_DIR_IN)) { 558 start_iso.no_urbs *= 2; 559 } 560 if (start_iso.no_urbs > 16) { 561 start_iso.no_urbs = 16; 562 } 563 564 /* No id, we look at the ep when receiving a status back */ 565 usbredirparser_send_start_iso_stream(dev->parser, 0, &start_iso); 566 usbredirparser_do_write(dev->parser); 567 DPRINTF("iso stream started pkts/sec %d pkts/urb %d urbs %d ep %02X\n", 568 pkts_per_sec, start_iso.pkts_per_urb, start_iso.no_urbs, ep); 569 dev->endpoint[EP2I(ep)].iso_started = 1; 570 dev->endpoint[EP2I(ep)].bufpq_prefilled = 0; 571 dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0; 572 } 573 574 if (ep & USB_DIR_IN) { 575 struct buf_packet *isop; 576 577 if (dev->endpoint[EP2I(ep)].iso_started && 578 !dev->endpoint[EP2I(ep)].bufpq_prefilled) { 579 if (dev->endpoint[EP2I(ep)].bufpq_size < 580 dev->endpoint[EP2I(ep)].bufpq_target_size) { 581 return; 582 } 583 dev->endpoint[EP2I(ep)].bufpq_prefilled = 1; 584 } 585 586 isop = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq); 587 if (isop == NULL) { 588 DPRINTF("iso-token-in ep %02X, no isop, iso_error: %d\n", 589 ep, dev->endpoint[EP2I(ep)].iso_error); 590 /* Re-fill the buffer */ 591 dev->endpoint[EP2I(ep)].bufpq_prefilled = 0; 592 /* Check iso_error for stream errors, otherwise its an underrun */ 593 status = dev->endpoint[EP2I(ep)].iso_error; 594 dev->endpoint[EP2I(ep)].iso_error = 0; 595 p->status = status ? USB_RET_IOERROR : USB_RET_SUCCESS; 596 return; 597 } 598 DPRINTF2("iso-token-in ep %02X status %d len %d queue-size: %d\n", ep, 599 isop->status, isop->len, dev->endpoint[EP2I(ep)].bufpq_size); 600 601 status = isop->status; 602 len = isop->len; 603 if (len > p->iov.size) { 604 ERROR("received iso data is larger then packet ep %02X (%d > %d)\n", 605 ep, len, (int)p->iov.size); 606 len = p->iov.size; 607 status = usb_redir_babble; 608 } 609 usb_packet_copy(p, isop->data, len); 610 bufp_free(dev, isop, ep); 611 usbredir_handle_status(dev, p, status); 612 } else { 613 /* If the stream was not started because of a pending error don't 614 send the packet to the usb-host */ 615 if (dev->endpoint[EP2I(ep)].iso_started) { 616 struct usb_redir_iso_packet_header iso_packet = { 617 .endpoint = ep, 618 .length = p->iov.size 619 }; 620 uint8_t buf[p->iov.size]; 621 /* No id, we look at the ep when receiving a status back */ 622 usb_packet_copy(p, buf, p->iov.size); 623 usbredirparser_send_iso_packet(dev->parser, 0, &iso_packet, 624 buf, p->iov.size); 625 usbredirparser_do_write(dev->parser); 626 } 627 status = dev->endpoint[EP2I(ep)].iso_error; 628 dev->endpoint[EP2I(ep)].iso_error = 0; 629 DPRINTF2("iso-token-out ep %02X status %d len %zd\n", ep, status, 630 p->iov.size); 631 usbredir_handle_status(dev, p, status); 632 } 633 } 634 635 static void usbredir_stop_iso_stream(USBRedirDevice *dev, uint8_t ep) 636 { 637 struct usb_redir_stop_iso_stream_header stop_iso_stream = { 638 .endpoint = ep 639 }; 640 if (dev->endpoint[EP2I(ep)].iso_started) { 641 usbredirparser_send_stop_iso_stream(dev->parser, 0, &stop_iso_stream); 642 DPRINTF("iso stream stopped ep %02X\n", ep); 643 dev->endpoint[EP2I(ep)].iso_started = 0; 644 } 645 dev->endpoint[EP2I(ep)].iso_error = 0; 646 usbredir_free_bufpq(dev, ep); 647 } 648 649 /* 650 * The usb-host may poll the endpoint faster then our guest, resulting in lots 651 * of smaller bulkp-s. The below buffered_bulk_in_complete* functions combine 652 * data from multiple bulkp-s into a single packet, avoiding bufpq overflows. 653 */ 654 static void usbredir_buffered_bulk_add_data_to_packet(USBRedirDevice *dev, 655 struct buf_packet *bulkp, int count, USBPacket *p, uint8_t ep) 656 { 657 usb_packet_copy(p, bulkp->data + bulkp->offset, count); 658 bulkp->offset += count; 659 if (bulkp->offset == bulkp->len) { 660 /* Store status in the last packet with data from this bulkp */ 661 usbredir_handle_status(dev, p, bulkp->status); 662 bufp_free(dev, bulkp, ep); 663 } 664 } 665 666 static void usbredir_buffered_bulk_in_complete_raw(USBRedirDevice *dev, 667 USBPacket *p, uint8_t ep) 668 { 669 struct buf_packet *bulkp; 670 int count; 671 672 while ((bulkp = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq)) && 673 p->actual_length < p->iov.size && p->status == USB_RET_SUCCESS) { 674 count = bulkp->len - bulkp->offset; 675 if (count > (p->iov.size - p->actual_length)) { 676 count = p->iov.size - p->actual_length; 677 } 678 usbredir_buffered_bulk_add_data_to_packet(dev, bulkp, count, p, ep); 679 } 680 } 681 682 static void usbredir_buffered_bulk_in_complete_ftdi(USBRedirDevice *dev, 683 USBPacket *p, uint8_t ep) 684 { 685 const int maxp = dev->endpoint[EP2I(ep)].max_packet_size; 686 uint8_t header[2] = { 0, 0 }; 687 struct buf_packet *bulkp; 688 int count; 689 690 while ((bulkp = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq)) && 691 p->actual_length < p->iov.size && p->status == USB_RET_SUCCESS) { 692 if (bulkp->len < 2) { 693 WARNING("malformed ftdi bulk in packet\n"); 694 bufp_free(dev, bulkp, ep); 695 continue; 696 } 697 698 if ((p->actual_length % maxp) == 0) { 699 usb_packet_copy(p, bulkp->data, 2); 700 memcpy(header, bulkp->data, 2); 701 } else { 702 if (bulkp->data[0] != header[0] || bulkp->data[1] != header[1]) { 703 break; /* Different header, add to next packet */ 704 } 705 } 706 707 if (bulkp->offset == 0) { 708 bulkp->offset = 2; /* Skip header */ 709 } 710 count = bulkp->len - bulkp->offset; 711 /* Must repeat the header at maxp interval */ 712 if (count > (maxp - (p->actual_length % maxp))) { 713 count = maxp - (p->actual_length % maxp); 714 } 715 usbredir_buffered_bulk_add_data_to_packet(dev, bulkp, count, p, ep); 716 } 717 } 718 719 static void usbredir_buffered_bulk_in_complete(USBRedirDevice *dev, 720 USBPacket *p, uint8_t ep) 721 { 722 p->status = USB_RET_SUCCESS; /* Clear previous ASYNC status */ 723 dev->buffered_bulk_in_complete(dev, p, ep); 724 DPRINTF("bulk-token-in ep %02X status %d len %d id %"PRIu64"\n", 725 ep, p->status, p->actual_length, p->id); 726 } 727 728 static void usbredir_handle_buffered_bulk_in_data(USBRedirDevice *dev, 729 USBPacket *p, uint8_t ep) 730 { 731 /* Input bulk endpoint, buffered packet input */ 732 if (!dev->endpoint[EP2I(ep)].bulk_receiving_started) { 733 int bpt; 734 struct usb_redir_start_bulk_receiving_header start = { 735 .endpoint = ep, 736 .stream_id = 0, 737 .no_transfers = 5, 738 }; 739 /* Round bytes_per_transfer up to a multiple of max_packet_size */ 740 bpt = 512 + dev->endpoint[EP2I(ep)].max_packet_size - 1; 741 bpt /= dev->endpoint[EP2I(ep)].max_packet_size; 742 bpt *= dev->endpoint[EP2I(ep)].max_packet_size; 743 start.bytes_per_transfer = bpt; 744 /* No id, we look at the ep when receiving a status back */ 745 usbredirparser_send_start_bulk_receiving(dev->parser, 0, &start); 746 usbredirparser_do_write(dev->parser); 747 DPRINTF("bulk receiving started bytes/transfer %u count %d ep %02X\n", 748 start.bytes_per_transfer, start.no_transfers, ep); 749 dev->endpoint[EP2I(ep)].bulk_receiving_started = 1; 750 /* We don't really want to drop bulk packets ever, but 751 having some upper limit to how much we buffer is good. */ 752 dev->endpoint[EP2I(ep)].bufpq_target_size = 5000; 753 dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0; 754 } 755 756 if (QTAILQ_EMPTY(&dev->endpoint[EP2I(ep)].bufpq)) { 757 DPRINTF("bulk-token-in ep %02X, no bulkp\n", ep); 758 assert(dev->endpoint[EP2I(ep)].pending_async_packet == NULL); 759 dev->endpoint[EP2I(ep)].pending_async_packet = p; 760 p->status = USB_RET_ASYNC; 761 return; 762 } 763 usbredir_buffered_bulk_in_complete(dev, p, ep); 764 } 765 766 static void usbredir_stop_bulk_receiving(USBRedirDevice *dev, uint8_t ep) 767 { 768 struct usb_redir_stop_bulk_receiving_header stop_bulk = { 769 .endpoint = ep, 770 .stream_id = 0, 771 }; 772 if (dev->endpoint[EP2I(ep)].bulk_receiving_started) { 773 usbredirparser_send_stop_bulk_receiving(dev->parser, 0, &stop_bulk); 774 DPRINTF("bulk receiving stopped ep %02X\n", ep); 775 dev->endpoint[EP2I(ep)].bulk_receiving_started = 0; 776 } 777 usbredir_free_bufpq(dev, ep); 778 } 779 780 static void usbredir_handle_bulk_data(USBRedirDevice *dev, USBPacket *p, 781 uint8_t ep) 782 { 783 struct usb_redir_bulk_packet_header bulk_packet; 784 size_t size = usb_packet_size(p); 785 const int maxp = dev->endpoint[EP2I(ep)].max_packet_size; 786 787 if (usbredir_already_in_flight(dev, p->id)) { 788 p->status = USB_RET_ASYNC; 789 return; 790 } 791 792 if (dev->endpoint[EP2I(ep)].bulk_receiving_enabled) { 793 if (size != 0 && (size % maxp) == 0) { 794 usbredir_handle_buffered_bulk_in_data(dev, p, ep); 795 return; 796 } 797 WARNING("bulk recv invalid size %zd ep %02x, disabling\n", size, ep); 798 assert(dev->endpoint[EP2I(ep)].pending_async_packet == NULL); 799 usbredir_stop_bulk_receiving(dev, ep); 800 dev->endpoint[EP2I(ep)].bulk_receiving_enabled = 0; 801 } 802 803 DPRINTF("bulk-out ep %02X stream %u len %zd id %"PRIu64"\n", 804 ep, p->stream, size, p->id); 805 806 bulk_packet.endpoint = ep; 807 bulk_packet.length = size; 808 bulk_packet.stream_id = p->stream; 809 bulk_packet.length_high = size >> 16; 810 assert(bulk_packet.length_high == 0 || 811 usbredirparser_peer_has_cap(dev->parser, 812 usb_redir_cap_32bits_bulk_length)); 813 814 if (ep & USB_DIR_IN || size == 0) { 815 usbredirparser_send_bulk_packet(dev->parser, p->id, 816 &bulk_packet, NULL, 0); 817 } else { 818 uint8_t buf[size]; 819 usb_packet_copy(p, buf, size); 820 usbredir_log_data(dev, "bulk data out:", buf, size); 821 usbredirparser_send_bulk_packet(dev->parser, p->id, 822 &bulk_packet, buf, size); 823 } 824 usbredirparser_do_write(dev->parser); 825 p->status = USB_RET_ASYNC; 826 } 827 828 static void usbredir_handle_interrupt_in_data(USBRedirDevice *dev, 829 USBPacket *p, uint8_t ep) 830 { 831 /* Input interrupt endpoint, buffered packet input */ 832 struct buf_packet *intp, *intp_to_free; 833 int status, len, sum; 834 835 if (!dev->endpoint[EP2I(ep)].interrupt_started && 836 !dev->endpoint[EP2I(ep)].interrupt_error) { 837 struct usb_redir_start_interrupt_receiving_header start_int = { 838 .endpoint = ep, 839 }; 840 /* No id, we look at the ep when receiving a status back */ 841 usbredirparser_send_start_interrupt_receiving(dev->parser, 0, 842 &start_int); 843 usbredirparser_do_write(dev->parser); 844 DPRINTF("interrupt recv started ep %02X\n", ep); 845 dev->endpoint[EP2I(ep)].interrupt_started = 1; 846 /* We don't really want to drop interrupt packets ever, but 847 having some upper limit to how much we buffer is good. */ 848 dev->endpoint[EP2I(ep)].bufpq_target_size = 1000; 849 dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0; 850 } 851 852 /* check for completed interrupt message (with all fragments) */ 853 sum = 0; 854 QTAILQ_FOREACH(intp, &dev->endpoint[EP2I(ep)].bufpq, next) { 855 sum += intp->len; 856 if (intp->len < dev->endpoint[EP2I(ep)].max_packet_size || 857 sum >= p->iov.size) 858 break; 859 } 860 861 if (intp == NULL) { 862 DPRINTF2("interrupt-token-in ep %02X, no intp, buffered %d\n", ep, sum); 863 /* Check interrupt_error for stream errors */ 864 status = dev->endpoint[EP2I(ep)].interrupt_error; 865 dev->endpoint[EP2I(ep)].interrupt_error = 0; 866 if (status) { 867 usbredir_handle_status(dev, p, status); 868 } else { 869 p->status = USB_RET_NAK; 870 } 871 return; 872 } 873 874 /* copy of completed interrupt message */ 875 sum = 0; 876 status = usb_redir_success; 877 intp_to_free = NULL; 878 QTAILQ_FOREACH(intp, &dev->endpoint[EP2I(ep)].bufpq, next) { 879 if (intp_to_free) { 880 bufp_free(dev, intp_to_free, ep); 881 } 882 DPRINTF("interrupt-token-in ep %02X fragment status %d len %d\n", ep, 883 intp->status, intp->len); 884 885 sum += intp->len; 886 len = intp->len; 887 if (status == usb_redir_success) { 888 status = intp->status; 889 } 890 if (sum > p->iov.size) { 891 ERROR("received int data is larger then packet ep %02X\n", ep); 892 len -= (sum - p->iov.size); 893 sum = p->iov.size; 894 status = usb_redir_babble; 895 } 896 897 usb_packet_copy(p, intp->data, len); 898 899 intp_to_free = intp; 900 if (intp->len < dev->endpoint[EP2I(ep)].max_packet_size || 901 sum >= p->iov.size) 902 break; 903 } 904 if (intp_to_free) { 905 bufp_free(dev, intp_to_free, ep); 906 } 907 DPRINTF("interrupt-token-in ep %02X summary status %d len %d\n", ep, 908 status, sum); 909 usbredir_handle_status(dev, p, status); 910 } 911 912 /* 913 * Handle interrupt out data, the usbredir protocol expects us to do this 914 * async, so that it can report back a completion status. But guests will 915 * expect immediate completion for an interrupt endpoint, and handling this 916 * async causes migration issues. So we report success directly, counting 917 * on the fact that output interrupt packets normally always succeed. 918 */ 919 static void usbredir_handle_interrupt_out_data(USBRedirDevice *dev, 920 USBPacket *p, uint8_t ep) 921 { 922 struct usb_redir_interrupt_packet_header interrupt_packet; 923 uint8_t buf[p->iov.size]; 924 925 DPRINTF("interrupt-out ep %02X len %zd id %"PRIu64"\n", ep, 926 p->iov.size, p->id); 927 928 interrupt_packet.endpoint = ep; 929 interrupt_packet.length = p->iov.size; 930 931 usb_packet_copy(p, buf, p->iov.size); 932 usbredir_log_data(dev, "interrupt data out:", buf, p->iov.size); 933 usbredirparser_send_interrupt_packet(dev->parser, p->id, 934 &interrupt_packet, buf, p->iov.size); 935 usbredirparser_do_write(dev->parser); 936 } 937 938 static void usbredir_stop_interrupt_receiving(USBRedirDevice *dev, 939 uint8_t ep) 940 { 941 struct usb_redir_stop_interrupt_receiving_header stop_interrupt_recv = { 942 .endpoint = ep 943 }; 944 if (dev->endpoint[EP2I(ep)].interrupt_started) { 945 usbredirparser_send_stop_interrupt_receiving(dev->parser, 0, 946 &stop_interrupt_recv); 947 DPRINTF("interrupt recv stopped ep %02X\n", ep); 948 dev->endpoint[EP2I(ep)].interrupt_started = 0; 949 } 950 dev->endpoint[EP2I(ep)].interrupt_error = 0; 951 usbredir_free_bufpq(dev, ep); 952 } 953 954 static void usbredir_handle_data(USBDevice *udev, USBPacket *p) 955 { 956 USBRedirDevice *dev = USB_REDIRECT(udev); 957 uint8_t ep; 958 959 ep = p->ep->nr; 960 if (p->pid == USB_TOKEN_IN) { 961 ep |= USB_DIR_IN; 962 } 963 964 switch (dev->endpoint[EP2I(ep)].type) { 965 case USB_ENDPOINT_XFER_CONTROL: 966 ERROR("handle_data called for control transfer on ep %02X\n", ep); 967 p->status = USB_RET_NAK; 968 break; 969 case USB_ENDPOINT_XFER_BULK: 970 if (p->state == USB_PACKET_SETUP && p->pid == USB_TOKEN_IN && 971 p->ep->pipeline) { 972 p->status = USB_RET_ADD_TO_QUEUE; 973 break; 974 } 975 usbredir_handle_bulk_data(dev, p, ep); 976 break; 977 case USB_ENDPOINT_XFER_ISOC: 978 usbredir_handle_iso_data(dev, p, ep); 979 break; 980 case USB_ENDPOINT_XFER_INT: 981 if (ep & USB_DIR_IN) { 982 usbredir_handle_interrupt_in_data(dev, p, ep); 983 } else { 984 usbredir_handle_interrupt_out_data(dev, p, ep); 985 } 986 break; 987 default: 988 ERROR("handle_data ep %02X has unknown type %d\n", ep, 989 dev->endpoint[EP2I(ep)].type); 990 p->status = USB_RET_NAK; 991 } 992 } 993 994 static void usbredir_flush_ep_queue(USBDevice *dev, USBEndpoint *ep) 995 { 996 if (ep->pid == USB_TOKEN_IN && ep->pipeline) { 997 usb_ep_combine_input_packets(ep); 998 } 999 } 1000 1001 static void usbredir_stop_ep(USBRedirDevice *dev, int i) 1002 { 1003 uint8_t ep = I2EP(i); 1004 1005 switch (dev->endpoint[i].type) { 1006 case USB_ENDPOINT_XFER_BULK: 1007 if (ep & USB_DIR_IN) { 1008 usbredir_stop_bulk_receiving(dev, ep); 1009 } 1010 break; 1011 case USB_ENDPOINT_XFER_ISOC: 1012 usbredir_stop_iso_stream(dev, ep); 1013 break; 1014 case USB_ENDPOINT_XFER_INT: 1015 if (ep & USB_DIR_IN) { 1016 usbredir_stop_interrupt_receiving(dev, ep); 1017 } 1018 break; 1019 } 1020 usbredir_free_bufpq(dev, ep); 1021 } 1022 1023 static void usbredir_ep_stopped(USBDevice *udev, USBEndpoint *uep) 1024 { 1025 USBRedirDevice *dev = USB_REDIRECT(udev); 1026 1027 usbredir_stop_ep(dev, USBEP2I(uep)); 1028 usbredirparser_do_write(dev->parser); 1029 } 1030 1031 static void usbredir_set_config(USBRedirDevice *dev, USBPacket *p, 1032 int config) 1033 { 1034 struct usb_redir_set_configuration_header set_config; 1035 int i; 1036 1037 DPRINTF("set config %d id %"PRIu64"\n", config, p->id); 1038 1039 for (i = 0; i < MAX_ENDPOINTS; i++) { 1040 usbredir_stop_ep(dev, i); 1041 } 1042 1043 set_config.configuration = config; 1044 usbredirparser_send_set_configuration(dev->parser, p->id, &set_config); 1045 usbredirparser_do_write(dev->parser); 1046 p->status = USB_RET_ASYNC; 1047 } 1048 1049 static void usbredir_get_config(USBRedirDevice *dev, USBPacket *p) 1050 { 1051 DPRINTF("get config id %"PRIu64"\n", p->id); 1052 1053 usbredirparser_send_get_configuration(dev->parser, p->id); 1054 usbredirparser_do_write(dev->parser); 1055 p->status = USB_RET_ASYNC; 1056 } 1057 1058 static void usbredir_set_interface(USBRedirDevice *dev, USBPacket *p, 1059 int interface, int alt) 1060 { 1061 struct usb_redir_set_alt_setting_header set_alt; 1062 int i; 1063 1064 DPRINTF("set interface %d alt %d id %"PRIu64"\n", interface, alt, p->id); 1065 1066 for (i = 0; i < MAX_ENDPOINTS; i++) { 1067 if (dev->endpoint[i].interface == interface) { 1068 usbredir_stop_ep(dev, i); 1069 } 1070 } 1071 1072 set_alt.interface = interface; 1073 set_alt.alt = alt; 1074 usbredirparser_send_set_alt_setting(dev->parser, p->id, &set_alt); 1075 usbredirparser_do_write(dev->parser); 1076 p->status = USB_RET_ASYNC; 1077 } 1078 1079 static void usbredir_get_interface(USBRedirDevice *dev, USBPacket *p, 1080 int interface) 1081 { 1082 struct usb_redir_get_alt_setting_header get_alt; 1083 1084 DPRINTF("get interface %d id %"PRIu64"\n", interface, p->id); 1085 1086 get_alt.interface = interface; 1087 usbredirparser_send_get_alt_setting(dev->parser, p->id, &get_alt); 1088 usbredirparser_do_write(dev->parser); 1089 p->status = USB_RET_ASYNC; 1090 } 1091 1092 static void usbredir_handle_control(USBDevice *udev, USBPacket *p, 1093 int request, int value, int index, int length, uint8_t *data) 1094 { 1095 USBRedirDevice *dev = USB_REDIRECT(udev); 1096 struct usb_redir_control_packet_header control_packet; 1097 1098 if (usbredir_already_in_flight(dev, p->id)) { 1099 p->status = USB_RET_ASYNC; 1100 return; 1101 } 1102 1103 /* Special cases for certain standard device requests */ 1104 switch (request) { 1105 case DeviceOutRequest | USB_REQ_SET_ADDRESS: 1106 DPRINTF("set address %d\n", value); 1107 dev->dev.addr = value; 1108 return; 1109 case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: 1110 usbredir_set_config(dev, p, value & 0xff); 1111 return; 1112 case DeviceRequest | USB_REQ_GET_CONFIGURATION: 1113 usbredir_get_config(dev, p); 1114 return; 1115 case InterfaceOutRequest | USB_REQ_SET_INTERFACE: 1116 usbredir_set_interface(dev, p, index, value); 1117 return; 1118 case InterfaceRequest | USB_REQ_GET_INTERFACE: 1119 usbredir_get_interface(dev, p, index); 1120 return; 1121 } 1122 1123 /* Normal ctrl requests, note request is (bRequestType << 8) | bRequest */ 1124 DPRINTF( 1125 "ctrl-out type 0x%x req 0x%x val 0x%x index %d len %d id %"PRIu64"\n", 1126 request >> 8, request & 0xff, value, index, length, p->id); 1127 1128 control_packet.request = request & 0xFF; 1129 control_packet.requesttype = request >> 8; 1130 control_packet.endpoint = control_packet.requesttype & USB_DIR_IN; 1131 control_packet.value = value; 1132 control_packet.index = index; 1133 control_packet.length = length; 1134 1135 if (control_packet.requesttype & USB_DIR_IN) { 1136 usbredirparser_send_control_packet(dev->parser, p->id, 1137 &control_packet, NULL, 0); 1138 } else { 1139 usbredir_log_data(dev, "ctrl data out:", data, length); 1140 usbredirparser_send_control_packet(dev->parser, p->id, 1141 &control_packet, data, length); 1142 } 1143 usbredirparser_do_write(dev->parser); 1144 p->status = USB_RET_ASYNC; 1145 } 1146 1147 static int usbredir_alloc_streams(USBDevice *udev, USBEndpoint **eps, 1148 int nr_eps, int streams) 1149 { 1150 USBRedirDevice *dev = USB_REDIRECT(udev); 1151 #if USBREDIR_VERSION >= 0x000700 1152 struct usb_redir_alloc_bulk_streams_header alloc_streams; 1153 int i; 1154 1155 if (!usbredirparser_peer_has_cap(dev->parser, 1156 usb_redir_cap_bulk_streams)) { 1157 ERROR("peer does not support streams\n"); 1158 goto reject; 1159 } 1160 1161 if (streams == 0) { 1162 ERROR("request to allocate 0 streams\n"); 1163 return -1; 1164 } 1165 1166 alloc_streams.no_streams = streams; 1167 alloc_streams.endpoints = 0; 1168 for (i = 0; i < nr_eps; i++) { 1169 alloc_streams.endpoints |= 1 << USBEP2I(eps[i]); 1170 } 1171 usbredirparser_send_alloc_bulk_streams(dev->parser, 0, &alloc_streams); 1172 usbredirparser_do_write(dev->parser); 1173 1174 return 0; 1175 #else 1176 ERROR("usbredir_alloc_streams not implemented\n"); 1177 goto reject; 1178 #endif 1179 reject: 1180 ERROR("streams are not available, disconnecting\n"); 1181 qemu_bh_schedule(dev->device_reject_bh); 1182 return -1; 1183 } 1184 1185 static void usbredir_free_streams(USBDevice *udev, USBEndpoint **eps, 1186 int nr_eps) 1187 { 1188 #if USBREDIR_VERSION >= 0x000700 1189 USBRedirDevice *dev = USB_REDIRECT(udev); 1190 struct usb_redir_free_bulk_streams_header free_streams; 1191 int i; 1192 1193 if (!usbredirparser_peer_has_cap(dev->parser, 1194 usb_redir_cap_bulk_streams)) { 1195 return; 1196 } 1197 1198 free_streams.endpoints = 0; 1199 for (i = 0; i < nr_eps; i++) { 1200 free_streams.endpoints |= 1 << USBEP2I(eps[i]); 1201 } 1202 usbredirparser_send_free_bulk_streams(dev->parser, 0, &free_streams); 1203 usbredirparser_do_write(dev->parser); 1204 #endif 1205 } 1206 1207 /* 1208 * Close events can be triggered by usbredirparser_do_write which gets called 1209 * from within the USBDevice data / control packet callbacks and doing a 1210 * usb_detach from within these callbacks is not a good idea. 1211 * 1212 * So we use a bh handler to take care of close events. 1213 */ 1214 static void usbredir_chardev_close_bh(void *opaque) 1215 { 1216 USBRedirDevice *dev = opaque; 1217 1218 qemu_bh_cancel(dev->device_reject_bh); 1219 usbredir_device_disconnect(dev); 1220 1221 if (dev->parser) { 1222 DPRINTF("destroying usbredirparser\n"); 1223 usbredirparser_destroy(dev->parser); 1224 dev->parser = NULL; 1225 } 1226 if (dev->watch) { 1227 g_source_remove(dev->watch); 1228 dev->watch = 0; 1229 } 1230 } 1231 1232 static void usbredir_create_parser(USBRedirDevice *dev) 1233 { 1234 uint32_t caps[USB_REDIR_CAPS_SIZE] = { 0, }; 1235 int flags = 0; 1236 1237 DPRINTF("creating usbredirparser\n"); 1238 1239 dev->parser = qemu_oom_check(usbredirparser_create()); 1240 dev->parser->priv = dev; 1241 dev->parser->log_func = usbredir_log; 1242 dev->parser->read_func = usbredir_read; 1243 dev->parser->write_func = usbredir_write; 1244 dev->parser->hello_func = usbredir_hello; 1245 dev->parser->device_connect_func = usbredir_device_connect; 1246 dev->parser->device_disconnect_func = usbredir_device_disconnect; 1247 dev->parser->interface_info_func = usbredir_interface_info; 1248 dev->parser->ep_info_func = usbredir_ep_info; 1249 dev->parser->configuration_status_func = usbredir_configuration_status; 1250 dev->parser->alt_setting_status_func = usbredir_alt_setting_status; 1251 dev->parser->iso_stream_status_func = usbredir_iso_stream_status; 1252 dev->parser->interrupt_receiving_status_func = 1253 usbredir_interrupt_receiving_status; 1254 dev->parser->bulk_streams_status_func = usbredir_bulk_streams_status; 1255 dev->parser->bulk_receiving_status_func = usbredir_bulk_receiving_status; 1256 dev->parser->control_packet_func = usbredir_control_packet; 1257 dev->parser->bulk_packet_func = usbredir_bulk_packet; 1258 dev->parser->iso_packet_func = usbredir_iso_packet; 1259 dev->parser->interrupt_packet_func = usbredir_interrupt_packet; 1260 dev->parser->buffered_bulk_packet_func = usbredir_buffered_bulk_packet; 1261 dev->read_buf = NULL; 1262 dev->read_buf_size = 0; 1263 1264 usbredirparser_caps_set_cap(caps, usb_redir_cap_connect_device_version); 1265 usbredirparser_caps_set_cap(caps, usb_redir_cap_filter); 1266 usbredirparser_caps_set_cap(caps, usb_redir_cap_ep_info_max_packet_size); 1267 usbredirparser_caps_set_cap(caps, usb_redir_cap_64bits_ids); 1268 usbredirparser_caps_set_cap(caps, usb_redir_cap_32bits_bulk_length); 1269 usbredirparser_caps_set_cap(caps, usb_redir_cap_bulk_receiving); 1270 #if USBREDIR_VERSION >= 0x000700 1271 if (dev->enable_streams) { 1272 usbredirparser_caps_set_cap(caps, usb_redir_cap_bulk_streams); 1273 } 1274 #endif 1275 1276 if (runstate_check(RUN_STATE_INMIGRATE)) { 1277 flags |= usbredirparser_fl_no_hello; 1278 } 1279 usbredirparser_init(dev->parser, VERSION, caps, USB_REDIR_CAPS_SIZE, 1280 flags); 1281 usbredirparser_do_write(dev->parser); 1282 } 1283 1284 static void usbredir_reject_device(USBRedirDevice *dev) 1285 { 1286 usbredir_device_disconnect(dev); 1287 if (usbredirparser_peer_has_cap(dev->parser, usb_redir_cap_filter)) { 1288 usbredirparser_send_filter_reject(dev->parser); 1289 usbredirparser_do_write(dev->parser); 1290 } 1291 } 1292 1293 /* 1294 * We may need to reject the device when the hcd calls alloc_streams, doing 1295 * an usb_detach from within a hcd call is not a good idea, hence this bh. 1296 */ 1297 static void usbredir_device_reject_bh(void *opaque) 1298 { 1299 USBRedirDevice *dev = opaque; 1300 1301 usbredir_reject_device(dev); 1302 } 1303 1304 static void usbredir_do_attach(void *opaque) 1305 { 1306 USBRedirDevice *dev = opaque; 1307 Error *local_err = NULL; 1308 1309 /* In order to work properly with XHCI controllers we need these caps */ 1310 if ((dev->dev.port->speedmask & USB_SPEED_MASK_SUPER) && !( 1311 usbredirparser_peer_has_cap(dev->parser, 1312 usb_redir_cap_ep_info_max_packet_size) && 1313 usbredirparser_peer_has_cap(dev->parser, 1314 usb_redir_cap_32bits_bulk_length) && 1315 usbredirparser_peer_has_cap(dev->parser, 1316 usb_redir_cap_64bits_ids))) { 1317 ERROR("usb-redir-host lacks capabilities needed for use with XHCI\n"); 1318 usbredir_reject_device(dev); 1319 return; 1320 } 1321 1322 usb_device_attach(&dev->dev, &local_err); 1323 if (local_err) { 1324 error_report_err(local_err); 1325 WARNING("rejecting device due to speed mismatch\n"); 1326 usbredir_reject_device(dev); 1327 } 1328 } 1329 1330 /* 1331 * chardev callbacks 1332 */ 1333 1334 static int usbredir_chardev_can_read(void *opaque) 1335 { 1336 USBRedirDevice *dev = opaque; 1337 1338 if (!dev->parser) { 1339 WARNING("chardev_can_read called on non open chardev!\n"); 1340 return 0; 1341 } 1342 1343 /* Don't read new data from the chardev until our state is fully synced */ 1344 if (!runstate_check(RUN_STATE_RUNNING)) { 1345 return 0; 1346 } 1347 1348 /* usbredir_parser_do_read will consume *all* data we give it */ 1349 return 1 * MiB; 1350 } 1351 1352 static void usbredir_chardev_read(void *opaque, const uint8_t *buf, int size) 1353 { 1354 USBRedirDevice *dev = opaque; 1355 1356 /* No recursion allowed! */ 1357 assert(dev->read_buf == NULL); 1358 1359 dev->read_buf = buf; 1360 dev->read_buf_size = size; 1361 1362 usbredirparser_do_read(dev->parser); 1363 /* Send any acks, etc. which may be queued now */ 1364 usbredirparser_do_write(dev->parser); 1365 } 1366 1367 static void usbredir_chardev_event(void *opaque, QEMUChrEvent event) 1368 { 1369 USBRedirDevice *dev = opaque; 1370 1371 switch (event) { 1372 case CHR_EVENT_OPENED: 1373 DPRINTF("chardev open\n"); 1374 /* Make sure any pending closes are handled (no-op if none pending) */ 1375 usbredir_chardev_close_bh(dev); 1376 qemu_bh_cancel(dev->chardev_close_bh); 1377 usbredir_create_parser(dev); 1378 break; 1379 case CHR_EVENT_CLOSED: 1380 DPRINTF("chardev close\n"); 1381 qemu_bh_schedule(dev->chardev_close_bh); 1382 break; 1383 case CHR_EVENT_BREAK: 1384 case CHR_EVENT_MUX_IN: 1385 case CHR_EVENT_MUX_OUT: 1386 /* Ignore */ 1387 break; 1388 } 1389 } 1390 1391 /* 1392 * init + destroy 1393 */ 1394 1395 static void usbredir_vm_state_change(void *priv, int running, RunState state) 1396 { 1397 USBRedirDevice *dev = priv; 1398 1399 if (state == RUN_STATE_RUNNING && dev->parser != NULL) { 1400 usbredirparser_do_write(dev->parser); /* Flush any pending writes */ 1401 } 1402 } 1403 1404 static void usbredir_init_endpoints(USBRedirDevice *dev) 1405 { 1406 int i; 1407 1408 usb_ep_init(&dev->dev); 1409 memset(dev->endpoint, 0, sizeof(dev->endpoint)); 1410 for (i = 0; i < MAX_ENDPOINTS; i++) { 1411 dev->endpoint[i].dev = dev; 1412 QTAILQ_INIT(&dev->endpoint[i].bufpq); 1413 } 1414 } 1415 1416 static void usbredir_realize(USBDevice *udev, Error **errp) 1417 { 1418 USBRedirDevice *dev = USB_REDIRECT(udev); 1419 int i; 1420 1421 if (!qemu_chr_fe_backend_connected(&dev->cs)) { 1422 error_setg(errp, QERR_MISSING_PARAMETER, "chardev"); 1423 return; 1424 } 1425 1426 if (dev->filter_str) { 1427 i = usbredirfilter_string_to_rules(dev->filter_str, ":", "|", 1428 &dev->filter_rules, 1429 &dev->filter_rules_count); 1430 if (i) { 1431 error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "filter", 1432 "a usb device filter string"); 1433 return; 1434 } 1435 } 1436 1437 dev->chardev_close_bh = qemu_bh_new(usbredir_chardev_close_bh, dev); 1438 dev->device_reject_bh = qemu_bh_new(usbredir_device_reject_bh, dev); 1439 dev->attach_timer = timer_new_ms(QEMU_CLOCK_VIRTUAL, usbredir_do_attach, dev); 1440 1441 packet_id_queue_init(&dev->cancelled, dev, "cancelled"); 1442 packet_id_queue_init(&dev->already_in_flight, dev, "already-in-flight"); 1443 usbredir_init_endpoints(dev); 1444 1445 /* We'll do the attach once we receive the speed from the usb-host */ 1446 udev->auto_attach = 0; 1447 1448 /* Will be cleared during setup when we find conflicts */ 1449 dev->compatible_speedmask = USB_SPEED_MASK_FULL | USB_SPEED_MASK_HIGH; 1450 1451 /* Let the backend know we are ready */ 1452 qemu_chr_fe_set_handlers(&dev->cs, usbredir_chardev_can_read, 1453 usbredir_chardev_read, usbredir_chardev_event, 1454 NULL, dev, NULL, true); 1455 1456 dev->vmstate = 1457 qemu_add_vm_change_state_handler(usbredir_vm_state_change, dev); 1458 } 1459 1460 static void usbredir_cleanup_device_queues(USBRedirDevice *dev) 1461 { 1462 int i; 1463 1464 packet_id_queue_empty(&dev->cancelled); 1465 packet_id_queue_empty(&dev->already_in_flight); 1466 for (i = 0; i < MAX_ENDPOINTS; i++) { 1467 usbredir_free_bufpq(dev, I2EP(i)); 1468 } 1469 } 1470 1471 static void usbredir_unrealize(USBDevice *udev, Error **errp) 1472 { 1473 USBRedirDevice *dev = USB_REDIRECT(udev); 1474 1475 qemu_chr_fe_deinit(&dev->cs, true); 1476 1477 /* Note must be done after qemu_chr_close, as that causes a close event */ 1478 qemu_bh_delete(dev->chardev_close_bh); 1479 qemu_bh_delete(dev->device_reject_bh); 1480 1481 timer_del(dev->attach_timer); 1482 timer_free(dev->attach_timer); 1483 1484 usbredir_cleanup_device_queues(dev); 1485 1486 if (dev->parser) { 1487 usbredirparser_destroy(dev->parser); 1488 } 1489 if (dev->watch) { 1490 g_source_remove(dev->watch); 1491 } 1492 1493 free(dev->filter_rules); 1494 qemu_del_vm_change_state_handler(dev->vmstate); 1495 } 1496 1497 static int usbredir_check_filter(USBRedirDevice *dev) 1498 { 1499 if (dev->interface_info.interface_count == NO_INTERFACE_INFO) { 1500 ERROR("No interface info for device\n"); 1501 goto error; 1502 } 1503 1504 if (dev->filter_rules) { 1505 if (!usbredirparser_peer_has_cap(dev->parser, 1506 usb_redir_cap_connect_device_version)) { 1507 ERROR("Device filter specified and peer does not have the " 1508 "connect_device_version capability\n"); 1509 goto error; 1510 } 1511 1512 if (usbredirfilter_check( 1513 dev->filter_rules, 1514 dev->filter_rules_count, 1515 dev->device_info.device_class, 1516 dev->device_info.device_subclass, 1517 dev->device_info.device_protocol, 1518 dev->interface_info.interface_class, 1519 dev->interface_info.interface_subclass, 1520 dev->interface_info.interface_protocol, 1521 dev->interface_info.interface_count, 1522 dev->device_info.vendor_id, 1523 dev->device_info.product_id, 1524 dev->device_info.device_version_bcd, 1525 0) != 0) { 1526 goto error; 1527 } 1528 } 1529 1530 return 0; 1531 1532 error: 1533 usbredir_reject_device(dev); 1534 return -1; 1535 } 1536 1537 static void usbredir_check_bulk_receiving(USBRedirDevice *dev) 1538 { 1539 int i, j, quirks; 1540 1541 if (!usbredirparser_peer_has_cap(dev->parser, 1542 usb_redir_cap_bulk_receiving)) { 1543 return; 1544 } 1545 1546 for (i = EP2I(USB_DIR_IN); i < MAX_ENDPOINTS; i++) { 1547 dev->endpoint[i].bulk_receiving_enabled = 0; 1548 } 1549 1550 if (dev->interface_info.interface_count == NO_INTERFACE_INFO) { 1551 return; 1552 } 1553 1554 for (i = 0; i < dev->interface_info.interface_count; i++) { 1555 quirks = usb_get_quirks(dev->device_info.vendor_id, 1556 dev->device_info.product_id, 1557 dev->interface_info.interface_class[i], 1558 dev->interface_info.interface_subclass[i], 1559 dev->interface_info.interface_protocol[i]); 1560 if (!(quirks & USB_QUIRK_BUFFER_BULK_IN)) { 1561 continue; 1562 } 1563 if (quirks & USB_QUIRK_IS_FTDI) { 1564 dev->buffered_bulk_in_complete = 1565 usbredir_buffered_bulk_in_complete_ftdi; 1566 } else { 1567 dev->buffered_bulk_in_complete = 1568 usbredir_buffered_bulk_in_complete_raw; 1569 } 1570 1571 for (j = EP2I(USB_DIR_IN); j < MAX_ENDPOINTS; j++) { 1572 if (dev->endpoint[j].interface == 1573 dev->interface_info.interface[i] && 1574 dev->endpoint[j].type == USB_ENDPOINT_XFER_BULK && 1575 dev->endpoint[j].max_packet_size != 0) { 1576 dev->endpoint[j].bulk_receiving_enabled = 1; 1577 /* 1578 * With buffering pipelining is not necessary. Also packet 1579 * combining and bulk in buffering don't play nice together! 1580 */ 1581 I2USBEP(dev, j)->pipeline = false; 1582 break; /* Only buffer for the first ep of each intf */ 1583 } 1584 } 1585 } 1586 } 1587 1588 /* 1589 * usbredirparser packet complete callbacks 1590 */ 1591 1592 static void usbredir_handle_status(USBRedirDevice *dev, USBPacket *p, 1593 int status) 1594 { 1595 switch (status) { 1596 case usb_redir_success: 1597 p->status = USB_RET_SUCCESS; /* Clear previous ASYNC status */ 1598 break; 1599 case usb_redir_stall: 1600 p->status = USB_RET_STALL; 1601 break; 1602 case usb_redir_cancelled: 1603 /* 1604 * When the usbredir-host unredirects a device, it will report a status 1605 * of cancelled for all pending packets, followed by a disconnect msg. 1606 */ 1607 p->status = USB_RET_IOERROR; 1608 break; 1609 case usb_redir_inval: 1610 WARNING("got invalid param error from usb-host?\n"); 1611 p->status = USB_RET_IOERROR; 1612 break; 1613 case usb_redir_babble: 1614 p->status = USB_RET_BABBLE; 1615 break; 1616 case usb_redir_ioerror: 1617 case usb_redir_timeout: 1618 default: 1619 p->status = USB_RET_IOERROR; 1620 } 1621 } 1622 1623 static void usbredir_hello(void *priv, struct usb_redir_hello_header *h) 1624 { 1625 USBRedirDevice *dev = priv; 1626 1627 /* Try to send the filter info now that we've the usb-host's caps */ 1628 if (usbredirparser_peer_has_cap(dev->parser, usb_redir_cap_filter) && 1629 dev->filter_rules) { 1630 usbredirparser_send_filter_filter(dev->parser, dev->filter_rules, 1631 dev->filter_rules_count); 1632 usbredirparser_do_write(dev->parser); 1633 } 1634 } 1635 1636 static void usbredir_device_connect(void *priv, 1637 struct usb_redir_device_connect_header *device_connect) 1638 { 1639 USBRedirDevice *dev = priv; 1640 const char *speed; 1641 1642 if (timer_pending(dev->attach_timer) || dev->dev.attached) { 1643 ERROR("Received device connect while already connected\n"); 1644 return; 1645 } 1646 1647 switch (device_connect->speed) { 1648 case usb_redir_speed_low: 1649 speed = "low speed"; 1650 dev->dev.speed = USB_SPEED_LOW; 1651 dev->compatible_speedmask &= ~USB_SPEED_MASK_FULL; 1652 dev->compatible_speedmask &= ~USB_SPEED_MASK_HIGH; 1653 break; 1654 case usb_redir_speed_full: 1655 speed = "full speed"; 1656 dev->dev.speed = USB_SPEED_FULL; 1657 dev->compatible_speedmask &= ~USB_SPEED_MASK_HIGH; 1658 break; 1659 case usb_redir_speed_high: 1660 speed = "high speed"; 1661 dev->dev.speed = USB_SPEED_HIGH; 1662 break; 1663 case usb_redir_speed_super: 1664 speed = "super speed"; 1665 dev->dev.speed = USB_SPEED_SUPER; 1666 break; 1667 default: 1668 speed = "unknown speed"; 1669 dev->dev.speed = USB_SPEED_FULL; 1670 } 1671 1672 if (usbredirparser_peer_has_cap(dev->parser, 1673 usb_redir_cap_connect_device_version)) { 1674 INFO("attaching %s device %04x:%04x version %d.%d class %02x\n", 1675 speed, device_connect->vendor_id, device_connect->product_id, 1676 ((device_connect->device_version_bcd & 0xf000) >> 12) * 10 + 1677 ((device_connect->device_version_bcd & 0x0f00) >> 8), 1678 ((device_connect->device_version_bcd & 0x00f0) >> 4) * 10 + 1679 ((device_connect->device_version_bcd & 0x000f) >> 0), 1680 device_connect->device_class); 1681 } else { 1682 INFO("attaching %s device %04x:%04x class %02x\n", speed, 1683 device_connect->vendor_id, device_connect->product_id, 1684 device_connect->device_class); 1685 } 1686 1687 dev->dev.speedmask = (1 << dev->dev.speed) | dev->compatible_speedmask; 1688 dev->device_info = *device_connect; 1689 1690 if (usbredir_check_filter(dev)) { 1691 WARNING("Device %04x:%04x rejected by device filter, not attaching\n", 1692 device_connect->vendor_id, device_connect->product_id); 1693 return; 1694 } 1695 1696 usbredir_check_bulk_receiving(dev); 1697 timer_mod(dev->attach_timer, dev->next_attach_time); 1698 } 1699 1700 static void usbredir_device_disconnect(void *priv) 1701 { 1702 USBRedirDevice *dev = priv; 1703 1704 /* Stop any pending attaches */ 1705 timer_del(dev->attach_timer); 1706 1707 if (dev->dev.attached) { 1708 DPRINTF("detaching device\n"); 1709 usb_device_detach(&dev->dev); 1710 /* 1711 * Delay next usb device attach to give the guest a chance to see 1712 * see the detach / attach in case of quick close / open succession 1713 */ 1714 dev->next_attach_time = qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) + 200; 1715 } 1716 1717 /* Reset state so that the next dev connected starts with a clean slate */ 1718 usbredir_cleanup_device_queues(dev); 1719 usbredir_init_endpoints(dev); 1720 dev->interface_info.interface_count = NO_INTERFACE_INFO; 1721 dev->dev.addr = 0; 1722 dev->dev.speed = 0; 1723 dev->compatible_speedmask = USB_SPEED_MASK_FULL | USB_SPEED_MASK_HIGH; 1724 } 1725 1726 static void usbredir_interface_info(void *priv, 1727 struct usb_redir_interface_info_header *interface_info) 1728 { 1729 USBRedirDevice *dev = priv; 1730 1731 dev->interface_info = *interface_info; 1732 1733 /* 1734 * If we receive interface info after the device has already been 1735 * connected (ie on a set_config), re-check interface dependent things. 1736 */ 1737 if (timer_pending(dev->attach_timer) || dev->dev.attached) { 1738 usbredir_check_bulk_receiving(dev); 1739 if (usbredir_check_filter(dev)) { 1740 ERROR("Device no longer matches filter after interface info " 1741 "change, disconnecting!\n"); 1742 } 1743 } 1744 } 1745 1746 static void usbredir_mark_speed_incompatible(USBRedirDevice *dev, int speed) 1747 { 1748 dev->compatible_speedmask &= ~(1 << speed); 1749 dev->dev.speedmask = (1 << dev->dev.speed) | dev->compatible_speedmask; 1750 } 1751 1752 static void usbredir_set_pipeline(USBRedirDevice *dev, struct USBEndpoint *uep) 1753 { 1754 if (uep->type != USB_ENDPOINT_XFER_BULK) { 1755 return; 1756 } 1757 if (uep->pid == USB_TOKEN_OUT) { 1758 uep->pipeline = true; 1759 } 1760 if (uep->pid == USB_TOKEN_IN && uep->max_packet_size != 0 && 1761 usbredirparser_peer_has_cap(dev->parser, 1762 usb_redir_cap_32bits_bulk_length)) { 1763 uep->pipeline = true; 1764 } 1765 } 1766 1767 static void usbredir_setup_usb_eps(USBRedirDevice *dev) 1768 { 1769 struct USBEndpoint *usb_ep; 1770 int i; 1771 1772 for (i = 0; i < MAX_ENDPOINTS; i++) { 1773 usb_ep = I2USBEP(dev, i); 1774 usb_ep->type = dev->endpoint[i].type; 1775 usb_ep->ifnum = dev->endpoint[i].interface; 1776 usb_ep->max_packet_size = dev->endpoint[i].max_packet_size; 1777 usb_ep->max_streams = dev->endpoint[i].max_streams; 1778 usbredir_set_pipeline(dev, usb_ep); 1779 } 1780 } 1781 1782 static void usbredir_ep_info(void *priv, 1783 struct usb_redir_ep_info_header *ep_info) 1784 { 1785 USBRedirDevice *dev = priv; 1786 int i; 1787 1788 assert(dev != NULL); 1789 for (i = 0; i < MAX_ENDPOINTS; i++) { 1790 dev->endpoint[i].type = ep_info->type[i]; 1791 dev->endpoint[i].interval = ep_info->interval[i]; 1792 dev->endpoint[i].interface = ep_info->interface[i]; 1793 if (usbredirparser_peer_has_cap(dev->parser, 1794 usb_redir_cap_ep_info_max_packet_size)) { 1795 dev->endpoint[i].max_packet_size = ep_info->max_packet_size[i]; 1796 } 1797 #if USBREDIR_VERSION >= 0x000700 1798 if (usbredirparser_peer_has_cap(dev->parser, 1799 usb_redir_cap_bulk_streams)) { 1800 dev->endpoint[i].max_streams = ep_info->max_streams[i]; 1801 } 1802 #endif 1803 switch (dev->endpoint[i].type) { 1804 case usb_redir_type_invalid: 1805 break; 1806 case usb_redir_type_iso: 1807 usbredir_mark_speed_incompatible(dev, USB_SPEED_FULL); 1808 usbredir_mark_speed_incompatible(dev, USB_SPEED_HIGH); 1809 /* Fall through */ 1810 case usb_redir_type_interrupt: 1811 if (!usbredirparser_peer_has_cap(dev->parser, 1812 usb_redir_cap_ep_info_max_packet_size) || 1813 ep_info->max_packet_size[i] > 64) { 1814 usbredir_mark_speed_incompatible(dev, USB_SPEED_FULL); 1815 } 1816 if (!usbredirparser_peer_has_cap(dev->parser, 1817 usb_redir_cap_ep_info_max_packet_size) || 1818 ep_info->max_packet_size[i] > 1024) { 1819 usbredir_mark_speed_incompatible(dev, USB_SPEED_HIGH); 1820 } 1821 if (dev->endpoint[i].interval == 0) { 1822 ERROR("Received 0 interval for isoc or irq endpoint\n"); 1823 usbredir_reject_device(dev); 1824 return; 1825 } 1826 /* Fall through */ 1827 case usb_redir_type_control: 1828 case usb_redir_type_bulk: 1829 DPRINTF("ep: %02X type: %d interface: %d\n", I2EP(i), 1830 dev->endpoint[i].type, dev->endpoint[i].interface); 1831 break; 1832 default: 1833 ERROR("Received invalid endpoint type\n"); 1834 usbredir_reject_device(dev); 1835 return; 1836 } 1837 } 1838 /* The new ep info may have caused a speed incompatibility, recheck */ 1839 if (dev->dev.attached && 1840 !(dev->dev.port->speedmask & dev->dev.speedmask)) { 1841 ERROR("Device no longer matches speed after endpoint info change, " 1842 "disconnecting!\n"); 1843 usbredir_reject_device(dev); 1844 return; 1845 } 1846 usbredir_setup_usb_eps(dev); 1847 usbredir_check_bulk_receiving(dev); 1848 } 1849 1850 static void usbredir_configuration_status(void *priv, uint64_t id, 1851 struct usb_redir_configuration_status_header *config_status) 1852 { 1853 USBRedirDevice *dev = priv; 1854 USBPacket *p; 1855 1856 DPRINTF("set config status %d config %d id %"PRIu64"\n", 1857 config_status->status, config_status->configuration, id); 1858 1859 p = usbredir_find_packet_by_id(dev, 0, id); 1860 if (p) { 1861 if (dev->dev.setup_buf[0] & USB_DIR_IN) { 1862 dev->dev.data_buf[0] = config_status->configuration; 1863 p->actual_length = 1; 1864 } 1865 usbredir_handle_status(dev, p, config_status->status); 1866 usb_generic_async_ctrl_complete(&dev->dev, p); 1867 } 1868 } 1869 1870 static void usbredir_alt_setting_status(void *priv, uint64_t id, 1871 struct usb_redir_alt_setting_status_header *alt_setting_status) 1872 { 1873 USBRedirDevice *dev = priv; 1874 USBPacket *p; 1875 1876 DPRINTF("alt status %d intf %d alt %d id: %"PRIu64"\n", 1877 alt_setting_status->status, alt_setting_status->interface, 1878 alt_setting_status->alt, id); 1879 1880 p = usbredir_find_packet_by_id(dev, 0, id); 1881 if (p) { 1882 if (dev->dev.setup_buf[0] & USB_DIR_IN) { 1883 dev->dev.data_buf[0] = alt_setting_status->alt; 1884 p->actual_length = 1; 1885 } 1886 usbredir_handle_status(dev, p, alt_setting_status->status); 1887 usb_generic_async_ctrl_complete(&dev->dev, p); 1888 } 1889 } 1890 1891 static void usbredir_iso_stream_status(void *priv, uint64_t id, 1892 struct usb_redir_iso_stream_status_header *iso_stream_status) 1893 { 1894 USBRedirDevice *dev = priv; 1895 uint8_t ep = iso_stream_status->endpoint; 1896 1897 DPRINTF("iso status %d ep %02X id %"PRIu64"\n", iso_stream_status->status, 1898 ep, id); 1899 1900 if (!dev->dev.attached || !dev->endpoint[EP2I(ep)].iso_started) { 1901 return; 1902 } 1903 1904 dev->endpoint[EP2I(ep)].iso_error = iso_stream_status->status; 1905 if (iso_stream_status->status == usb_redir_stall) { 1906 DPRINTF("iso stream stopped by peer ep %02X\n", ep); 1907 dev->endpoint[EP2I(ep)].iso_started = 0; 1908 } 1909 } 1910 1911 static void usbredir_interrupt_receiving_status(void *priv, uint64_t id, 1912 struct usb_redir_interrupt_receiving_status_header 1913 *interrupt_receiving_status) 1914 { 1915 USBRedirDevice *dev = priv; 1916 uint8_t ep = interrupt_receiving_status->endpoint; 1917 1918 DPRINTF("interrupt recv status %d ep %02X id %"PRIu64"\n", 1919 interrupt_receiving_status->status, ep, id); 1920 1921 if (!dev->dev.attached || !dev->endpoint[EP2I(ep)].interrupt_started) { 1922 return; 1923 } 1924 1925 dev->endpoint[EP2I(ep)].interrupt_error = 1926 interrupt_receiving_status->status; 1927 if (interrupt_receiving_status->status == usb_redir_stall) { 1928 DPRINTF("interrupt receiving stopped by peer ep %02X\n", ep); 1929 dev->endpoint[EP2I(ep)].interrupt_started = 0; 1930 } 1931 } 1932 1933 static void usbredir_bulk_streams_status(void *priv, uint64_t id, 1934 struct usb_redir_bulk_streams_status_header *bulk_streams_status) 1935 { 1936 #if USBREDIR_VERSION >= 0x000700 1937 USBRedirDevice *dev = priv; 1938 1939 if (bulk_streams_status->status == usb_redir_success) { 1940 DPRINTF("bulk streams status %d eps %08x\n", 1941 bulk_streams_status->status, bulk_streams_status->endpoints); 1942 } else { 1943 ERROR("bulk streams %s failed status %d eps %08x\n", 1944 (bulk_streams_status->no_streams == 0) ? "free" : "alloc", 1945 bulk_streams_status->status, bulk_streams_status->endpoints); 1946 ERROR("usb-redir-host does not provide streams, disconnecting\n"); 1947 usbredir_reject_device(dev); 1948 } 1949 #endif 1950 } 1951 1952 static void usbredir_bulk_receiving_status(void *priv, uint64_t id, 1953 struct usb_redir_bulk_receiving_status_header *bulk_receiving_status) 1954 { 1955 USBRedirDevice *dev = priv; 1956 uint8_t ep = bulk_receiving_status->endpoint; 1957 1958 DPRINTF("bulk recv status %d ep %02X id %"PRIu64"\n", 1959 bulk_receiving_status->status, ep, id); 1960 1961 if (!dev->dev.attached || !dev->endpoint[EP2I(ep)].bulk_receiving_started) { 1962 return; 1963 } 1964 1965 if (bulk_receiving_status->status == usb_redir_stall) { 1966 DPRINTF("bulk receiving stopped by peer ep %02X\n", ep); 1967 dev->endpoint[EP2I(ep)].bulk_receiving_started = 0; 1968 } 1969 } 1970 1971 static void usbredir_control_packet(void *priv, uint64_t id, 1972 struct usb_redir_control_packet_header *control_packet, 1973 uint8_t *data, int data_len) 1974 { 1975 USBRedirDevice *dev = priv; 1976 USBPacket *p; 1977 int len = control_packet->length; 1978 1979 DPRINTF("ctrl-in status %d len %d id %"PRIu64"\n", control_packet->status, 1980 len, id); 1981 1982 /* Fix up USB-3 ep0 maxpacket size to allow superspeed connected devices 1983 * to work redirected to a not superspeed capable hcd */ 1984 if (dev->dev.speed == USB_SPEED_SUPER && 1985 !((dev->dev.port->speedmask & USB_SPEED_MASK_SUPER)) && 1986 control_packet->requesttype == 0x80 && 1987 control_packet->request == 6 && 1988 control_packet->value == 0x100 && control_packet->index == 0 && 1989 data_len >= 18 && data[7] == 9) { 1990 data[7] = 64; 1991 } 1992 1993 p = usbredir_find_packet_by_id(dev, 0, id); 1994 if (p) { 1995 usbredir_handle_status(dev, p, control_packet->status); 1996 if (data_len > 0) { 1997 usbredir_log_data(dev, "ctrl data in:", data, data_len); 1998 if (data_len > sizeof(dev->dev.data_buf)) { 1999 ERROR("ctrl buffer too small (%d > %zu)\n", 2000 data_len, sizeof(dev->dev.data_buf)); 2001 p->status = USB_RET_STALL; 2002 data_len = len = sizeof(dev->dev.data_buf); 2003 } 2004 memcpy(dev->dev.data_buf, data, data_len); 2005 } 2006 p->actual_length = len; 2007 /* 2008 * If this is GET_DESCRIPTOR request for configuration descriptor, 2009 * remove 'remote wakeup' flag from it to prevent idle power down 2010 * in Windows guest 2011 */ 2012 if (dev->suppress_remote_wake && 2013 control_packet->requesttype == USB_DIR_IN && 2014 control_packet->request == USB_REQ_GET_DESCRIPTOR && 2015 control_packet->value == (USB_DT_CONFIG << 8) && 2016 control_packet->index == 0 && 2017 /* bmAttributes field of config descriptor */ 2018 len > 7 && (dev->dev.data_buf[7] & USB_CFG_ATT_WAKEUP)) { 2019 DPRINTF("Removed remote wake %04X:%04X\n", 2020 dev->device_info.vendor_id, 2021 dev->device_info.product_id); 2022 dev->dev.data_buf[7] &= ~USB_CFG_ATT_WAKEUP; 2023 } 2024 usb_generic_async_ctrl_complete(&dev->dev, p); 2025 } 2026 free(data); 2027 } 2028 2029 static void usbredir_bulk_packet(void *priv, uint64_t id, 2030 struct usb_redir_bulk_packet_header *bulk_packet, 2031 uint8_t *data, int data_len) 2032 { 2033 USBRedirDevice *dev = priv; 2034 uint8_t ep = bulk_packet->endpoint; 2035 int len = (bulk_packet->length_high << 16) | bulk_packet->length; 2036 USBPacket *p; 2037 2038 DPRINTF("bulk-in status %d ep %02X stream %u len %d id %"PRIu64"\n", 2039 bulk_packet->status, ep, bulk_packet->stream_id, len, id); 2040 2041 p = usbredir_find_packet_by_id(dev, ep, id); 2042 if (p) { 2043 size_t size = usb_packet_size(p); 2044 usbredir_handle_status(dev, p, bulk_packet->status); 2045 if (data_len > 0) { 2046 usbredir_log_data(dev, "bulk data in:", data, data_len); 2047 if (data_len > size) { 2048 ERROR("bulk got more data then requested (%d > %zd)\n", 2049 data_len, p->iov.size); 2050 p->status = USB_RET_BABBLE; 2051 data_len = len = size; 2052 } 2053 usb_packet_copy(p, data, data_len); 2054 } 2055 p->actual_length = len; 2056 if (p->pid == USB_TOKEN_IN && p->ep->pipeline) { 2057 usb_combined_input_packet_complete(&dev->dev, p); 2058 } else { 2059 usb_packet_complete(&dev->dev, p); 2060 } 2061 } 2062 free(data); 2063 } 2064 2065 static void usbredir_iso_packet(void *priv, uint64_t id, 2066 struct usb_redir_iso_packet_header *iso_packet, 2067 uint8_t *data, int data_len) 2068 { 2069 USBRedirDevice *dev = priv; 2070 uint8_t ep = iso_packet->endpoint; 2071 2072 DPRINTF2("iso-in status %d ep %02X len %d id %"PRIu64"\n", 2073 iso_packet->status, ep, data_len, id); 2074 2075 if (dev->endpoint[EP2I(ep)].type != USB_ENDPOINT_XFER_ISOC) { 2076 ERROR("received iso packet for non iso endpoint %02X\n", ep); 2077 free(data); 2078 return; 2079 } 2080 2081 if (dev->endpoint[EP2I(ep)].iso_started == 0) { 2082 DPRINTF("received iso packet for non started stream ep %02X\n", ep); 2083 free(data); 2084 return; 2085 } 2086 2087 /* bufp_alloc also adds the packet to the ep queue */ 2088 bufp_alloc(dev, data, data_len, iso_packet->status, ep, data); 2089 } 2090 2091 static void usbredir_interrupt_packet(void *priv, uint64_t id, 2092 struct usb_redir_interrupt_packet_header *interrupt_packet, 2093 uint8_t *data, int data_len) 2094 { 2095 USBRedirDevice *dev = priv; 2096 uint8_t ep = interrupt_packet->endpoint; 2097 2098 DPRINTF("interrupt-in status %d ep %02X len %d id %"PRIu64"\n", 2099 interrupt_packet->status, ep, data_len, id); 2100 2101 if (dev->endpoint[EP2I(ep)].type != USB_ENDPOINT_XFER_INT) { 2102 ERROR("received int packet for non interrupt endpoint %02X\n", ep); 2103 free(data); 2104 return; 2105 } 2106 2107 if (ep & USB_DIR_IN) { 2108 if (dev->endpoint[EP2I(ep)].interrupt_started == 0) { 2109 DPRINTF("received int packet while not started ep %02X\n", ep); 2110 free(data); 2111 return; 2112 } 2113 2114 /* bufp_alloc also adds the packet to the ep queue */ 2115 bufp_alloc(dev, data, data_len, interrupt_packet->status, ep, data); 2116 2117 /* insufficient data solved with USB_RET_NAK */ 2118 usb_wakeup(usb_ep_get(&dev->dev, USB_TOKEN_IN, ep & 0x0f), 0); 2119 } else { 2120 /* 2121 * We report output interrupt packets as completed directly upon 2122 * submission, so all we can do here if one failed is warn. 2123 */ 2124 if (interrupt_packet->status) { 2125 WARNING("interrupt output failed status %d ep %02X id %"PRIu64"\n", 2126 interrupt_packet->status, ep, id); 2127 } 2128 } 2129 } 2130 2131 static void usbredir_buffered_bulk_packet(void *priv, uint64_t id, 2132 struct usb_redir_buffered_bulk_packet_header *buffered_bulk_packet, 2133 uint8_t *data, int data_len) 2134 { 2135 USBRedirDevice *dev = priv; 2136 uint8_t status, ep = buffered_bulk_packet->endpoint; 2137 void *free_on_destroy; 2138 int i, len; 2139 2140 DPRINTF("buffered-bulk-in status %d ep %02X len %d id %"PRIu64"\n", 2141 buffered_bulk_packet->status, ep, data_len, id); 2142 2143 if (dev->endpoint[EP2I(ep)].type != USB_ENDPOINT_XFER_BULK) { 2144 ERROR("received buffered-bulk packet for non bulk ep %02X\n", ep); 2145 free(data); 2146 return; 2147 } 2148 2149 if (dev->endpoint[EP2I(ep)].bulk_receiving_started == 0) { 2150 DPRINTF("received buffered-bulk packet on not started ep %02X\n", ep); 2151 free(data); 2152 return; 2153 } 2154 2155 /* Data must be in maxp chunks for buffered_bulk_add_*_data_to_packet */ 2156 len = dev->endpoint[EP2I(ep)].max_packet_size; 2157 status = usb_redir_success; 2158 free_on_destroy = NULL; 2159 for (i = 0; i < data_len; i += len) { 2160 int r; 2161 if (len >= (data_len - i)) { 2162 len = data_len - i; 2163 status = buffered_bulk_packet->status; 2164 free_on_destroy = data; 2165 } 2166 /* bufp_alloc also adds the packet to the ep queue */ 2167 r = bufp_alloc(dev, data + i, len, status, ep, free_on_destroy); 2168 if (r) { 2169 break; 2170 } 2171 } 2172 2173 if (dev->endpoint[EP2I(ep)].pending_async_packet) { 2174 USBPacket *p = dev->endpoint[EP2I(ep)].pending_async_packet; 2175 dev->endpoint[EP2I(ep)].pending_async_packet = NULL; 2176 usbredir_buffered_bulk_in_complete(dev, p, ep); 2177 usb_packet_complete(&dev->dev, p); 2178 } 2179 } 2180 2181 /* 2182 * Migration code 2183 */ 2184 2185 static int usbredir_pre_save(void *priv) 2186 { 2187 USBRedirDevice *dev = priv; 2188 2189 usbredir_fill_already_in_flight(dev); 2190 2191 return 0; 2192 } 2193 2194 static int usbredir_post_load(void *priv, int version_id) 2195 { 2196 USBRedirDevice *dev = priv; 2197 2198 if (dev == NULL || dev->parser == NULL) { 2199 return 0; 2200 } 2201 2202 switch (dev->device_info.speed) { 2203 case usb_redir_speed_low: 2204 dev->dev.speed = USB_SPEED_LOW; 2205 break; 2206 case usb_redir_speed_full: 2207 dev->dev.speed = USB_SPEED_FULL; 2208 break; 2209 case usb_redir_speed_high: 2210 dev->dev.speed = USB_SPEED_HIGH; 2211 break; 2212 case usb_redir_speed_super: 2213 dev->dev.speed = USB_SPEED_SUPER; 2214 break; 2215 default: 2216 dev->dev.speed = USB_SPEED_FULL; 2217 } 2218 dev->dev.speedmask = (1 << dev->dev.speed); 2219 2220 usbredir_setup_usb_eps(dev); 2221 usbredir_check_bulk_receiving(dev); 2222 2223 return 0; 2224 } 2225 2226 /* For usbredirparser migration */ 2227 static int usbredir_put_parser(QEMUFile *f, void *priv, size_t unused, 2228 const VMStateField *field, QJSON *vmdesc) 2229 { 2230 USBRedirDevice *dev = priv; 2231 uint8_t *data; 2232 int len; 2233 2234 if (dev->parser == NULL) { 2235 qemu_put_be32(f, 0); 2236 return 0; 2237 } 2238 2239 usbredirparser_serialize(dev->parser, &data, &len); 2240 qemu_oom_check(data); 2241 2242 qemu_put_be32(f, len); 2243 qemu_put_buffer(f, data, len); 2244 2245 free(data); 2246 2247 return 0; 2248 } 2249 2250 static int usbredir_get_parser(QEMUFile *f, void *priv, size_t unused, 2251 const VMStateField *field) 2252 { 2253 USBRedirDevice *dev = priv; 2254 uint8_t *data; 2255 int len, ret; 2256 2257 len = qemu_get_be32(f); 2258 if (len == 0) { 2259 return 0; 2260 } 2261 2262 /* 2263 * If our chardev is not open already at this point the usbredir connection 2264 * has been broken (non seamless migration, or restore from disk). 2265 * 2266 * In this case create a temporary parser to receive the migration data, 2267 * and schedule the close_bh to report the device as disconnected to the 2268 * guest and to destroy the parser again. 2269 */ 2270 if (dev->parser == NULL) { 2271 WARNING("usb-redir connection broken during migration\n"); 2272 usbredir_create_parser(dev); 2273 qemu_bh_schedule(dev->chardev_close_bh); 2274 } 2275 2276 data = g_malloc(len); 2277 qemu_get_buffer(f, data, len); 2278 2279 ret = usbredirparser_unserialize(dev->parser, data, len); 2280 2281 g_free(data); 2282 2283 return ret; 2284 } 2285 2286 static const VMStateInfo usbredir_parser_vmstate_info = { 2287 .name = "usb-redir-parser", 2288 .put = usbredir_put_parser, 2289 .get = usbredir_get_parser, 2290 }; 2291 2292 2293 /* For buffered packets (iso/irq) queue migration */ 2294 static int usbredir_put_bufpq(QEMUFile *f, void *priv, size_t unused, 2295 const VMStateField *field, QJSON *vmdesc) 2296 { 2297 struct endp_data *endp = priv; 2298 USBRedirDevice *dev = endp->dev; 2299 struct buf_packet *bufp; 2300 int len, i = 0; 2301 2302 qemu_put_be32(f, endp->bufpq_size); 2303 QTAILQ_FOREACH(bufp, &endp->bufpq, next) { 2304 len = bufp->len - bufp->offset; 2305 DPRINTF("put_bufpq %d/%d len %d status %d\n", i + 1, endp->bufpq_size, 2306 len, bufp->status); 2307 qemu_put_be32(f, len); 2308 qemu_put_be32(f, bufp->status); 2309 qemu_put_buffer(f, bufp->data + bufp->offset, len); 2310 i++; 2311 } 2312 assert(i == endp->bufpq_size); 2313 2314 return 0; 2315 } 2316 2317 static int usbredir_get_bufpq(QEMUFile *f, void *priv, size_t unused, 2318 const VMStateField *field) 2319 { 2320 struct endp_data *endp = priv; 2321 USBRedirDevice *dev = endp->dev; 2322 struct buf_packet *bufp; 2323 int i; 2324 2325 endp->bufpq_size = qemu_get_be32(f); 2326 for (i = 0; i < endp->bufpq_size; i++) { 2327 bufp = g_new(struct buf_packet, 1); 2328 bufp->len = qemu_get_be32(f); 2329 bufp->status = qemu_get_be32(f); 2330 bufp->offset = 0; 2331 bufp->data = qemu_oom_check(malloc(bufp->len)); /* regular malloc! */ 2332 bufp->free_on_destroy = bufp->data; 2333 qemu_get_buffer(f, bufp->data, bufp->len); 2334 QTAILQ_INSERT_TAIL(&endp->bufpq, bufp, next); 2335 DPRINTF("get_bufpq %d/%d len %d status %d\n", i + 1, endp->bufpq_size, 2336 bufp->len, bufp->status); 2337 } 2338 return 0; 2339 } 2340 2341 static const VMStateInfo usbredir_ep_bufpq_vmstate_info = { 2342 .name = "usb-redir-bufpq", 2343 .put = usbredir_put_bufpq, 2344 .get = usbredir_get_bufpq, 2345 }; 2346 2347 2348 /* For endp_data migration */ 2349 static bool usbredir_bulk_receiving_needed(void *priv) 2350 { 2351 struct endp_data *endp = priv; 2352 2353 return endp->bulk_receiving_started; 2354 } 2355 2356 static const VMStateDescription usbredir_bulk_receiving_vmstate = { 2357 .name = "usb-redir-ep/bulk-receiving", 2358 .version_id = 1, 2359 .minimum_version_id = 1, 2360 .needed = usbredir_bulk_receiving_needed, 2361 .fields = (VMStateField[]) { 2362 VMSTATE_UINT8(bulk_receiving_started, struct endp_data), 2363 VMSTATE_END_OF_LIST() 2364 } 2365 }; 2366 2367 static bool usbredir_stream_needed(void *priv) 2368 { 2369 struct endp_data *endp = priv; 2370 2371 return endp->max_streams; 2372 } 2373 2374 static const VMStateDescription usbredir_stream_vmstate = { 2375 .name = "usb-redir-ep/stream-state", 2376 .version_id = 1, 2377 .minimum_version_id = 1, 2378 .needed = usbredir_stream_needed, 2379 .fields = (VMStateField[]) { 2380 VMSTATE_UINT32(max_streams, struct endp_data), 2381 VMSTATE_END_OF_LIST() 2382 } 2383 }; 2384 2385 static const VMStateDescription usbredir_ep_vmstate = { 2386 .name = "usb-redir-ep", 2387 .version_id = 1, 2388 .minimum_version_id = 1, 2389 .fields = (VMStateField[]) { 2390 VMSTATE_UINT8(type, struct endp_data), 2391 VMSTATE_UINT8(interval, struct endp_data), 2392 VMSTATE_UINT8(interface, struct endp_data), 2393 VMSTATE_UINT16(max_packet_size, struct endp_data), 2394 VMSTATE_UINT8(iso_started, struct endp_data), 2395 VMSTATE_UINT8(iso_error, struct endp_data), 2396 VMSTATE_UINT8(interrupt_started, struct endp_data), 2397 VMSTATE_UINT8(interrupt_error, struct endp_data), 2398 VMSTATE_UINT8(bufpq_prefilled, struct endp_data), 2399 VMSTATE_UINT8(bufpq_dropping_packets, struct endp_data), 2400 { 2401 .name = "bufpq", 2402 .version_id = 0, 2403 .field_exists = NULL, 2404 .size = 0, 2405 .info = &usbredir_ep_bufpq_vmstate_info, 2406 .flags = VMS_SINGLE, 2407 .offset = 0, 2408 }, 2409 VMSTATE_INT32(bufpq_target_size, struct endp_data), 2410 VMSTATE_END_OF_LIST() 2411 }, 2412 .subsections = (const VMStateDescription*[]) { 2413 &usbredir_bulk_receiving_vmstate, 2414 &usbredir_stream_vmstate, 2415 NULL 2416 } 2417 }; 2418 2419 2420 /* For PacketIdQueue migration */ 2421 static int usbredir_put_packet_id_q(QEMUFile *f, void *priv, size_t unused, 2422 const VMStateField *field, QJSON *vmdesc) 2423 { 2424 struct PacketIdQueue *q = priv; 2425 USBRedirDevice *dev = q->dev; 2426 struct PacketIdQueueEntry *e; 2427 int remain = q->size; 2428 2429 DPRINTF("put_packet_id_q %s size %d\n", q->name, q->size); 2430 qemu_put_be32(f, q->size); 2431 QTAILQ_FOREACH(e, &q->head, next) { 2432 qemu_put_be64(f, e->id); 2433 remain--; 2434 } 2435 assert(remain == 0); 2436 2437 return 0; 2438 } 2439 2440 static int usbredir_get_packet_id_q(QEMUFile *f, void *priv, size_t unused, 2441 const VMStateField *field) 2442 { 2443 struct PacketIdQueue *q = priv; 2444 USBRedirDevice *dev = q->dev; 2445 int i, size; 2446 uint64_t id; 2447 2448 size = qemu_get_be32(f); 2449 DPRINTF("get_packet_id_q %s size %d\n", q->name, size); 2450 for (i = 0; i < size; i++) { 2451 id = qemu_get_be64(f); 2452 packet_id_queue_add(q, id); 2453 } 2454 assert(q->size == size); 2455 return 0; 2456 } 2457 2458 static const VMStateInfo usbredir_ep_packet_id_q_vmstate_info = { 2459 .name = "usb-redir-packet-id-q", 2460 .put = usbredir_put_packet_id_q, 2461 .get = usbredir_get_packet_id_q, 2462 }; 2463 2464 static const VMStateDescription usbredir_ep_packet_id_queue_vmstate = { 2465 .name = "usb-redir-packet-id-queue", 2466 .version_id = 1, 2467 .minimum_version_id = 1, 2468 .fields = (VMStateField[]) { 2469 { 2470 .name = "queue", 2471 .version_id = 0, 2472 .field_exists = NULL, 2473 .size = 0, 2474 .info = &usbredir_ep_packet_id_q_vmstate_info, 2475 .flags = VMS_SINGLE, 2476 .offset = 0, 2477 }, 2478 VMSTATE_END_OF_LIST() 2479 } 2480 }; 2481 2482 2483 /* For usb_redir_device_connect_header migration */ 2484 static const VMStateDescription usbredir_device_info_vmstate = { 2485 .name = "usb-redir-device-info", 2486 .version_id = 1, 2487 .minimum_version_id = 1, 2488 .fields = (VMStateField[]) { 2489 VMSTATE_UINT8(speed, struct usb_redir_device_connect_header), 2490 VMSTATE_UINT8(device_class, struct usb_redir_device_connect_header), 2491 VMSTATE_UINT8(device_subclass, struct usb_redir_device_connect_header), 2492 VMSTATE_UINT8(device_protocol, struct usb_redir_device_connect_header), 2493 VMSTATE_UINT16(vendor_id, struct usb_redir_device_connect_header), 2494 VMSTATE_UINT16(product_id, struct usb_redir_device_connect_header), 2495 VMSTATE_UINT16(device_version_bcd, 2496 struct usb_redir_device_connect_header), 2497 VMSTATE_END_OF_LIST() 2498 } 2499 }; 2500 2501 2502 /* For usb_redir_interface_info_header migration */ 2503 static const VMStateDescription usbredir_interface_info_vmstate = { 2504 .name = "usb-redir-interface-info", 2505 .version_id = 1, 2506 .minimum_version_id = 1, 2507 .fields = (VMStateField[]) { 2508 VMSTATE_UINT32(interface_count, 2509 struct usb_redir_interface_info_header), 2510 VMSTATE_UINT8_ARRAY(interface, 2511 struct usb_redir_interface_info_header, 32), 2512 VMSTATE_UINT8_ARRAY(interface_class, 2513 struct usb_redir_interface_info_header, 32), 2514 VMSTATE_UINT8_ARRAY(interface_subclass, 2515 struct usb_redir_interface_info_header, 32), 2516 VMSTATE_UINT8_ARRAY(interface_protocol, 2517 struct usb_redir_interface_info_header, 32), 2518 VMSTATE_END_OF_LIST() 2519 } 2520 }; 2521 2522 2523 /* And finally the USBRedirDevice vmstate itself */ 2524 static const VMStateDescription usbredir_vmstate = { 2525 .name = "usb-redir", 2526 .version_id = 1, 2527 .minimum_version_id = 1, 2528 .pre_save = usbredir_pre_save, 2529 .post_load = usbredir_post_load, 2530 .fields = (VMStateField[]) { 2531 VMSTATE_USB_DEVICE(dev, USBRedirDevice), 2532 VMSTATE_TIMER_PTR(attach_timer, USBRedirDevice), 2533 { 2534 .name = "parser", 2535 .version_id = 0, 2536 .field_exists = NULL, 2537 .size = 0, 2538 .info = &usbredir_parser_vmstate_info, 2539 .flags = VMS_SINGLE, 2540 .offset = 0, 2541 }, 2542 VMSTATE_STRUCT_ARRAY(endpoint, USBRedirDevice, MAX_ENDPOINTS, 1, 2543 usbredir_ep_vmstate, struct endp_data), 2544 VMSTATE_STRUCT(cancelled, USBRedirDevice, 1, 2545 usbredir_ep_packet_id_queue_vmstate, 2546 struct PacketIdQueue), 2547 VMSTATE_STRUCT(already_in_flight, USBRedirDevice, 1, 2548 usbredir_ep_packet_id_queue_vmstate, 2549 struct PacketIdQueue), 2550 VMSTATE_STRUCT(device_info, USBRedirDevice, 1, 2551 usbredir_device_info_vmstate, 2552 struct usb_redir_device_connect_header), 2553 VMSTATE_STRUCT(interface_info, USBRedirDevice, 1, 2554 usbredir_interface_info_vmstate, 2555 struct usb_redir_interface_info_header), 2556 VMSTATE_END_OF_LIST() 2557 } 2558 }; 2559 2560 static Property usbredir_properties[] = { 2561 DEFINE_PROP_CHR("chardev", USBRedirDevice, cs), 2562 DEFINE_PROP_UINT8("debug", USBRedirDevice, debug, usbredirparser_warning), 2563 DEFINE_PROP_STRING("filter", USBRedirDevice, filter_str), 2564 DEFINE_PROP_BOOL("streams", USBRedirDevice, enable_streams, true), 2565 DEFINE_PROP_BOOL("suppress-remote-wake", USBRedirDevice, 2566 suppress_remote_wake, true), 2567 DEFINE_PROP_END_OF_LIST(), 2568 }; 2569 2570 static void usbredir_class_initfn(ObjectClass *klass, void *data) 2571 { 2572 USBDeviceClass *uc = USB_DEVICE_CLASS(klass); 2573 DeviceClass *dc = DEVICE_CLASS(klass); 2574 2575 uc->realize = usbredir_realize; 2576 uc->product_desc = "USB Redirection Device"; 2577 uc->unrealize = usbredir_unrealize; 2578 uc->cancel_packet = usbredir_cancel_packet; 2579 uc->handle_reset = usbredir_handle_reset; 2580 uc->handle_data = usbredir_handle_data; 2581 uc->handle_control = usbredir_handle_control; 2582 uc->flush_ep_queue = usbredir_flush_ep_queue; 2583 uc->ep_stopped = usbredir_ep_stopped; 2584 uc->alloc_streams = usbredir_alloc_streams; 2585 uc->free_streams = usbredir_free_streams; 2586 dc->vmsd = &usbredir_vmstate; 2587 device_class_set_props(dc, usbredir_properties); 2588 set_bit(DEVICE_CATEGORY_MISC, dc->categories); 2589 } 2590 2591 static void usbredir_instance_init(Object *obj) 2592 { 2593 USBDevice *udev = USB_DEVICE(obj); 2594 USBRedirDevice *dev = USB_REDIRECT(udev); 2595 2596 device_add_bootindex_property(obj, &dev->bootindex, 2597 "bootindex", NULL, 2598 &udev->qdev, NULL); 2599 } 2600 2601 static const TypeInfo usbredir_dev_info = { 2602 .name = TYPE_USB_REDIR, 2603 .parent = TYPE_USB_DEVICE, 2604 .instance_size = sizeof(USBRedirDevice), 2605 .class_init = usbredir_class_initfn, 2606 .instance_init = usbredir_instance_init, 2607 }; 2608 2609 static void usbredir_register_types(void) 2610 { 2611 type_register_static(&usbredir_dev_info); 2612 } 2613 2614 type_init(usbredir_register_types) 2615