1 /* 2 * USB redirector usb-guest 3 * 4 * Copyright (c) 2011-2012 Red Hat, Inc. 5 * 6 * Red Hat Authors: 7 * Hans de Goede <hdegoede@redhat.com> 8 * 9 * Permission is hereby granted, free of charge, to any person obtaining a copy 10 * of this software and associated documentation files (the "Software"), to deal 11 * in the Software without restriction, including without limitation the rights 12 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 13 * copies of the Software, and to permit persons to whom the Software is 14 * furnished to do so, subject to the following conditions: 15 * 16 * The above copyright notice and this permission notice shall be included in 17 * all copies or substantial portions of the Software. 18 * 19 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 20 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 21 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 22 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 23 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 24 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 25 * THE SOFTWARE. 26 */ 27 28 #include "qemu-common.h" 29 #include "qemu/timer.h" 30 #include "monitor/monitor.h" 31 #include "sysemu/sysemu.h" 32 #include "qemu/iov.h" 33 #include "sysemu/char.h" 34 35 #include <dirent.h> 36 #include <sys/ioctl.h> 37 #include <signal.h> 38 #include <usbredirparser.h> 39 #include <usbredirfilter.h> 40 41 #include "hw/usb.h" 42 43 #define MAX_ENDPOINTS 32 44 #define NO_INTERFACE_INFO 255 /* Valid interface_count always <= 32 */ 45 #define EP2I(ep_address) (((ep_address & 0x80) >> 3) | (ep_address & 0x0f)) 46 #define I2EP(i) (((i & 0x10) << 3) | (i & 0x0f)) 47 #define USBEP2I(usb_ep) (((usb_ep)->pid == USB_TOKEN_IN) ? \ 48 ((usb_ep)->nr | 0x10) : ((usb_ep)->nr)) 49 #define I2USBEP(d, i) (usb_ep_get(&(d)->dev, \ 50 ((i) & 0x10) ? USB_TOKEN_IN : USB_TOKEN_OUT, \ 51 (i) & 0x0f)) 52 53 typedef struct USBRedirDevice USBRedirDevice; 54 55 /* Struct to hold buffered packets */ 56 struct buf_packet { 57 uint8_t *data; 58 void *free_on_destroy; 59 uint16_t len; 60 uint16_t offset; 61 uint8_t status; 62 QTAILQ_ENTRY(buf_packet)next; 63 }; 64 65 struct endp_data { 66 USBRedirDevice *dev; 67 uint8_t type; 68 uint8_t interval; 69 uint8_t interface; /* bInterfaceNumber this ep belongs to */ 70 uint16_t max_packet_size; /* In bytes, not wMaxPacketSize format !! */ 71 uint8_t iso_started; 72 uint8_t iso_error; /* For reporting iso errors to the HC */ 73 uint8_t interrupt_started; 74 uint8_t interrupt_error; 75 uint8_t bulk_receiving_enabled; 76 uint8_t bulk_receiving_started; 77 uint8_t bufpq_prefilled; 78 uint8_t bufpq_dropping_packets; 79 QTAILQ_HEAD(, buf_packet) bufpq; 80 int32_t bufpq_size; 81 int32_t bufpq_target_size; 82 USBPacket *pending_async_packet; 83 }; 84 85 struct PacketIdQueueEntry { 86 uint64_t id; 87 QTAILQ_ENTRY(PacketIdQueueEntry)next; 88 }; 89 90 struct PacketIdQueue { 91 USBRedirDevice *dev; 92 const char *name; 93 QTAILQ_HEAD(, PacketIdQueueEntry) head; 94 int size; 95 }; 96 97 struct USBRedirDevice { 98 USBDevice dev; 99 /* Properties */ 100 CharDriverState *cs; 101 uint8_t debug; 102 char *filter_str; 103 int32_t bootindex; 104 /* Data passed from chardev the fd_read cb to the usbredirparser read cb */ 105 const uint8_t *read_buf; 106 int read_buf_size; 107 /* Active chardev-watch-tag */ 108 guint watch; 109 /* For async handling of close */ 110 QEMUBH *chardev_close_bh; 111 /* To delay the usb attach in case of quick chardev close + open */ 112 QEMUTimer *attach_timer; 113 int64_t next_attach_time; 114 struct usbredirparser *parser; 115 struct endp_data endpoint[MAX_ENDPOINTS]; 116 struct PacketIdQueue cancelled; 117 struct PacketIdQueue already_in_flight; 118 void (*buffered_bulk_in_complete)(USBRedirDevice *, USBPacket *, uint8_t); 119 /* Data for device filtering */ 120 struct usb_redir_device_connect_header device_info; 121 struct usb_redir_interface_info_header interface_info; 122 struct usbredirfilter_rule *filter_rules; 123 int filter_rules_count; 124 int compatible_speedmask; 125 }; 126 127 static void usbredir_hello(void *priv, struct usb_redir_hello_header *h); 128 static void usbredir_device_connect(void *priv, 129 struct usb_redir_device_connect_header *device_connect); 130 static void usbredir_device_disconnect(void *priv); 131 static void usbredir_interface_info(void *priv, 132 struct usb_redir_interface_info_header *interface_info); 133 static void usbredir_ep_info(void *priv, 134 struct usb_redir_ep_info_header *ep_info); 135 static void usbredir_configuration_status(void *priv, uint64_t id, 136 struct usb_redir_configuration_status_header *configuration_status); 137 static void usbredir_alt_setting_status(void *priv, uint64_t id, 138 struct usb_redir_alt_setting_status_header *alt_setting_status); 139 static void usbredir_iso_stream_status(void *priv, uint64_t id, 140 struct usb_redir_iso_stream_status_header *iso_stream_status); 141 static void usbredir_interrupt_receiving_status(void *priv, uint64_t id, 142 struct usb_redir_interrupt_receiving_status_header 143 *interrupt_receiving_status); 144 static void usbredir_bulk_streams_status(void *priv, uint64_t id, 145 struct usb_redir_bulk_streams_status_header *bulk_streams_status); 146 static void usbredir_bulk_receiving_status(void *priv, uint64_t id, 147 struct usb_redir_bulk_receiving_status_header *bulk_receiving_status); 148 static void usbredir_control_packet(void *priv, uint64_t id, 149 struct usb_redir_control_packet_header *control_packet, 150 uint8_t *data, int data_len); 151 static void usbredir_bulk_packet(void *priv, uint64_t id, 152 struct usb_redir_bulk_packet_header *bulk_packet, 153 uint8_t *data, int data_len); 154 static void usbredir_iso_packet(void *priv, uint64_t id, 155 struct usb_redir_iso_packet_header *iso_packet, 156 uint8_t *data, int data_len); 157 static void usbredir_interrupt_packet(void *priv, uint64_t id, 158 struct usb_redir_interrupt_packet_header *interrupt_header, 159 uint8_t *data, int data_len); 160 static void usbredir_buffered_bulk_packet(void *priv, uint64_t id, 161 struct usb_redir_buffered_bulk_packet_header *buffered_bulk_packet, 162 uint8_t *data, int data_len); 163 164 static void usbredir_handle_status(USBRedirDevice *dev, USBPacket *p, 165 int status); 166 167 #define VERSION "qemu usb-redir guest " QEMU_VERSION 168 169 /* 170 * Logging stuff 171 */ 172 173 #define ERROR(...) \ 174 do { \ 175 if (dev->debug >= usbredirparser_error) { \ 176 error_report("usb-redir error: " __VA_ARGS__); \ 177 } \ 178 } while (0) 179 #define WARNING(...) \ 180 do { \ 181 if (dev->debug >= usbredirparser_warning) { \ 182 error_report("usb-redir warning: " __VA_ARGS__); \ 183 } \ 184 } while (0) 185 #define INFO(...) \ 186 do { \ 187 if (dev->debug >= usbredirparser_info) { \ 188 error_report("usb-redir: " __VA_ARGS__); \ 189 } \ 190 } while (0) 191 #define DPRINTF(...) \ 192 do { \ 193 if (dev->debug >= usbredirparser_debug) { \ 194 error_report("usb-redir: " __VA_ARGS__); \ 195 } \ 196 } while (0) 197 #define DPRINTF2(...) \ 198 do { \ 199 if (dev->debug >= usbredirparser_debug_data) { \ 200 error_report("usb-redir: " __VA_ARGS__); \ 201 } \ 202 } while (0) 203 204 static void usbredir_log(void *priv, int level, const char *msg) 205 { 206 USBRedirDevice *dev = priv; 207 208 if (dev->debug < level) { 209 return; 210 } 211 212 error_report("%s", msg); 213 } 214 215 static void usbredir_log_data(USBRedirDevice *dev, const char *desc, 216 const uint8_t *data, int len) 217 { 218 int i, j, n; 219 220 if (dev->debug < usbredirparser_debug_data) { 221 return; 222 } 223 224 for (i = 0; i < len; i += j) { 225 char buf[128]; 226 227 n = sprintf(buf, "%s", desc); 228 for (j = 0; j < 8 && i + j < len; j++) { 229 n += sprintf(buf + n, " %02X", data[i + j]); 230 } 231 error_report("%s", buf); 232 } 233 } 234 235 /* 236 * usbredirparser io functions 237 */ 238 239 static int usbredir_read(void *priv, uint8_t *data, int count) 240 { 241 USBRedirDevice *dev = priv; 242 243 if (dev->read_buf_size < count) { 244 count = dev->read_buf_size; 245 } 246 247 memcpy(data, dev->read_buf, count); 248 249 dev->read_buf_size -= count; 250 if (dev->read_buf_size) { 251 dev->read_buf += count; 252 } else { 253 dev->read_buf = NULL; 254 } 255 256 return count; 257 } 258 259 static gboolean usbredir_write_unblocked(GIOChannel *chan, GIOCondition cond, 260 void *opaque) 261 { 262 USBRedirDevice *dev = opaque; 263 264 dev->watch = 0; 265 usbredirparser_do_write(dev->parser); 266 267 return FALSE; 268 } 269 270 static int usbredir_write(void *priv, uint8_t *data, int count) 271 { 272 USBRedirDevice *dev = priv; 273 int r; 274 275 if (!dev->cs->be_open) { 276 return 0; 277 } 278 279 /* Don't send new data to the chardev until our state is fully synced */ 280 if (!runstate_check(RUN_STATE_RUNNING)) { 281 return 0; 282 } 283 284 r = qemu_chr_fe_write(dev->cs, data, count); 285 if (r < count) { 286 if (!dev->watch) { 287 dev->watch = qemu_chr_fe_add_watch(dev->cs, G_IO_OUT, 288 usbredir_write_unblocked, dev); 289 } 290 if (r < 0) { 291 r = 0; 292 } 293 } 294 return r; 295 } 296 297 /* 298 * Cancelled and buffered packets helpers 299 */ 300 301 static void packet_id_queue_init(struct PacketIdQueue *q, 302 USBRedirDevice *dev, const char *name) 303 { 304 q->dev = dev; 305 q->name = name; 306 QTAILQ_INIT(&q->head); 307 q->size = 0; 308 } 309 310 static void packet_id_queue_add(struct PacketIdQueue *q, uint64_t id) 311 { 312 USBRedirDevice *dev = q->dev; 313 struct PacketIdQueueEntry *e; 314 315 DPRINTF("adding packet id %"PRIu64" to %s queue\n", id, q->name); 316 317 e = g_malloc0(sizeof(struct PacketIdQueueEntry)); 318 e->id = id; 319 QTAILQ_INSERT_TAIL(&q->head, e, next); 320 q->size++; 321 } 322 323 static int packet_id_queue_remove(struct PacketIdQueue *q, uint64_t id) 324 { 325 USBRedirDevice *dev = q->dev; 326 struct PacketIdQueueEntry *e; 327 328 QTAILQ_FOREACH(e, &q->head, next) { 329 if (e->id == id) { 330 DPRINTF("removing packet id %"PRIu64" from %s queue\n", 331 id, q->name); 332 QTAILQ_REMOVE(&q->head, e, next); 333 q->size--; 334 g_free(e); 335 return 1; 336 } 337 } 338 return 0; 339 } 340 341 static void packet_id_queue_empty(struct PacketIdQueue *q) 342 { 343 USBRedirDevice *dev = q->dev; 344 struct PacketIdQueueEntry *e, *next_e; 345 346 DPRINTF("removing %d packet-ids from %s queue\n", q->size, q->name); 347 348 QTAILQ_FOREACH_SAFE(e, &q->head, next, next_e) { 349 QTAILQ_REMOVE(&q->head, e, next); 350 g_free(e); 351 } 352 q->size = 0; 353 } 354 355 static void usbredir_cancel_packet(USBDevice *udev, USBPacket *p) 356 { 357 USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev); 358 int i = USBEP2I(p->ep); 359 360 if (p->combined) { 361 usb_combined_packet_cancel(udev, p); 362 return; 363 } 364 365 if (dev->endpoint[i].pending_async_packet) { 366 assert(dev->endpoint[i].pending_async_packet == p); 367 dev->endpoint[i].pending_async_packet = NULL; 368 return; 369 } 370 371 packet_id_queue_add(&dev->cancelled, p->id); 372 usbredirparser_send_cancel_data_packet(dev->parser, p->id); 373 usbredirparser_do_write(dev->parser); 374 } 375 376 static int usbredir_is_cancelled(USBRedirDevice *dev, uint64_t id) 377 { 378 if (!dev->dev.attached) { 379 return 1; /* Treat everything as cancelled after a disconnect */ 380 } 381 return packet_id_queue_remove(&dev->cancelled, id); 382 } 383 384 static void usbredir_fill_already_in_flight_from_ep(USBRedirDevice *dev, 385 struct USBEndpoint *ep) 386 { 387 static USBPacket *p; 388 389 /* async handled packets for bulk receiving eps do not count as inflight */ 390 if (dev->endpoint[USBEP2I(ep)].bulk_receiving_started) { 391 return; 392 } 393 394 QTAILQ_FOREACH(p, &ep->queue, queue) { 395 /* Skip combined packets, except for the first */ 396 if (p->combined && p != p->combined->first) { 397 continue; 398 } 399 if (p->state == USB_PACKET_ASYNC) { 400 packet_id_queue_add(&dev->already_in_flight, p->id); 401 } 402 } 403 } 404 405 static void usbredir_fill_already_in_flight(USBRedirDevice *dev) 406 { 407 int ep; 408 struct USBDevice *udev = &dev->dev; 409 410 usbredir_fill_already_in_flight_from_ep(dev, &udev->ep_ctl); 411 412 for (ep = 0; ep < USB_MAX_ENDPOINTS; ep++) { 413 usbredir_fill_already_in_flight_from_ep(dev, &udev->ep_in[ep]); 414 usbredir_fill_already_in_flight_from_ep(dev, &udev->ep_out[ep]); 415 } 416 } 417 418 static int usbredir_already_in_flight(USBRedirDevice *dev, uint64_t id) 419 { 420 return packet_id_queue_remove(&dev->already_in_flight, id); 421 } 422 423 static USBPacket *usbredir_find_packet_by_id(USBRedirDevice *dev, 424 uint8_t ep, uint64_t id) 425 { 426 USBPacket *p; 427 428 if (usbredir_is_cancelled(dev, id)) { 429 return NULL; 430 } 431 432 p = usb_ep_find_packet_by_id(&dev->dev, 433 (ep & USB_DIR_IN) ? USB_TOKEN_IN : USB_TOKEN_OUT, 434 ep & 0x0f, id); 435 if (p == NULL) { 436 ERROR("could not find packet with id %"PRIu64"\n", id); 437 } 438 return p; 439 } 440 441 static void bufp_alloc(USBRedirDevice *dev, uint8_t *data, uint16_t len, 442 uint8_t status, uint8_t ep, void *free_on_destroy) 443 { 444 struct buf_packet *bufp; 445 446 if (!dev->endpoint[EP2I(ep)].bufpq_dropping_packets && 447 dev->endpoint[EP2I(ep)].bufpq_size > 448 2 * dev->endpoint[EP2I(ep)].bufpq_target_size) { 449 DPRINTF("bufpq overflow, dropping packets ep %02X\n", ep); 450 dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 1; 451 } 452 /* Since we're interupting the stream anyways, drop enough packets to get 453 back to our target buffer size */ 454 if (dev->endpoint[EP2I(ep)].bufpq_dropping_packets) { 455 if (dev->endpoint[EP2I(ep)].bufpq_size > 456 dev->endpoint[EP2I(ep)].bufpq_target_size) { 457 free(data); 458 return; 459 } 460 dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0; 461 } 462 463 bufp = g_malloc(sizeof(struct buf_packet)); 464 bufp->data = data; 465 bufp->len = len; 466 bufp->offset = 0; 467 bufp->status = status; 468 bufp->free_on_destroy = free_on_destroy; 469 QTAILQ_INSERT_TAIL(&dev->endpoint[EP2I(ep)].bufpq, bufp, next); 470 dev->endpoint[EP2I(ep)].bufpq_size++; 471 } 472 473 static void bufp_free(USBRedirDevice *dev, struct buf_packet *bufp, 474 uint8_t ep) 475 { 476 QTAILQ_REMOVE(&dev->endpoint[EP2I(ep)].bufpq, bufp, next); 477 dev->endpoint[EP2I(ep)].bufpq_size--; 478 free(bufp->free_on_destroy); 479 g_free(bufp); 480 } 481 482 static void usbredir_free_bufpq(USBRedirDevice *dev, uint8_t ep) 483 { 484 struct buf_packet *buf, *buf_next; 485 486 QTAILQ_FOREACH_SAFE(buf, &dev->endpoint[EP2I(ep)].bufpq, next, buf_next) { 487 bufp_free(dev, buf, ep); 488 } 489 } 490 491 /* 492 * USBDevice callbacks 493 */ 494 495 static void usbredir_handle_reset(USBDevice *udev) 496 { 497 USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev); 498 499 DPRINTF("reset device\n"); 500 usbredirparser_send_reset(dev->parser); 501 usbredirparser_do_write(dev->parser); 502 } 503 504 static void usbredir_handle_iso_data(USBRedirDevice *dev, USBPacket *p, 505 uint8_t ep) 506 { 507 int status, len; 508 if (!dev->endpoint[EP2I(ep)].iso_started && 509 !dev->endpoint[EP2I(ep)].iso_error) { 510 struct usb_redir_start_iso_stream_header start_iso = { 511 .endpoint = ep, 512 }; 513 int pkts_per_sec; 514 515 if (dev->dev.speed == USB_SPEED_HIGH) { 516 pkts_per_sec = 8000 / dev->endpoint[EP2I(ep)].interval; 517 } else { 518 pkts_per_sec = 1000 / dev->endpoint[EP2I(ep)].interval; 519 } 520 /* Testing has shown that we need circa 60 ms buffer */ 521 dev->endpoint[EP2I(ep)].bufpq_target_size = (pkts_per_sec * 60) / 1000; 522 523 /* Aim for approx 100 interrupts / second on the client to 524 balance latency and interrupt load */ 525 start_iso.pkts_per_urb = pkts_per_sec / 100; 526 if (start_iso.pkts_per_urb < 1) { 527 start_iso.pkts_per_urb = 1; 528 } else if (start_iso.pkts_per_urb > 32) { 529 start_iso.pkts_per_urb = 32; 530 } 531 532 start_iso.no_urbs = (dev->endpoint[EP2I(ep)].bufpq_target_size + 533 start_iso.pkts_per_urb - 1) / 534 start_iso.pkts_per_urb; 535 /* Output endpoints pre-fill only 1/2 of the packets, keeping the rest 536 as overflow buffer. Also see the usbredir protocol documentation */ 537 if (!(ep & USB_DIR_IN)) { 538 start_iso.no_urbs *= 2; 539 } 540 if (start_iso.no_urbs > 16) { 541 start_iso.no_urbs = 16; 542 } 543 544 /* No id, we look at the ep when receiving a status back */ 545 usbredirparser_send_start_iso_stream(dev->parser, 0, &start_iso); 546 usbredirparser_do_write(dev->parser); 547 DPRINTF("iso stream started pkts/sec %d pkts/urb %d urbs %d ep %02X\n", 548 pkts_per_sec, start_iso.pkts_per_urb, start_iso.no_urbs, ep); 549 dev->endpoint[EP2I(ep)].iso_started = 1; 550 dev->endpoint[EP2I(ep)].bufpq_prefilled = 0; 551 dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0; 552 } 553 554 if (ep & USB_DIR_IN) { 555 struct buf_packet *isop; 556 557 if (dev->endpoint[EP2I(ep)].iso_started && 558 !dev->endpoint[EP2I(ep)].bufpq_prefilled) { 559 if (dev->endpoint[EP2I(ep)].bufpq_size < 560 dev->endpoint[EP2I(ep)].bufpq_target_size) { 561 return; 562 } 563 dev->endpoint[EP2I(ep)].bufpq_prefilled = 1; 564 } 565 566 isop = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq); 567 if (isop == NULL) { 568 DPRINTF("iso-token-in ep %02X, no isop, iso_error: %d\n", 569 ep, dev->endpoint[EP2I(ep)].iso_error); 570 /* Re-fill the buffer */ 571 dev->endpoint[EP2I(ep)].bufpq_prefilled = 0; 572 /* Check iso_error for stream errors, otherwise its an underrun */ 573 status = dev->endpoint[EP2I(ep)].iso_error; 574 dev->endpoint[EP2I(ep)].iso_error = 0; 575 p->status = status ? USB_RET_IOERROR : USB_RET_SUCCESS; 576 return; 577 } 578 DPRINTF2("iso-token-in ep %02X status %d len %d queue-size: %d\n", ep, 579 isop->status, isop->len, dev->endpoint[EP2I(ep)].bufpq_size); 580 581 status = isop->status; 582 len = isop->len; 583 if (len > p->iov.size) { 584 ERROR("received iso data is larger then packet ep %02X (%d > %d)\n", 585 ep, len, (int)p->iov.size); 586 len = p->iov.size; 587 status = usb_redir_babble; 588 } 589 usb_packet_copy(p, isop->data, len); 590 bufp_free(dev, isop, ep); 591 usbredir_handle_status(dev, p, status); 592 } else { 593 /* If the stream was not started because of a pending error don't 594 send the packet to the usb-host */ 595 if (dev->endpoint[EP2I(ep)].iso_started) { 596 struct usb_redir_iso_packet_header iso_packet = { 597 .endpoint = ep, 598 .length = p->iov.size 599 }; 600 uint8_t buf[p->iov.size]; 601 /* No id, we look at the ep when receiving a status back */ 602 usb_packet_copy(p, buf, p->iov.size); 603 usbredirparser_send_iso_packet(dev->parser, 0, &iso_packet, 604 buf, p->iov.size); 605 usbredirparser_do_write(dev->parser); 606 } 607 status = dev->endpoint[EP2I(ep)].iso_error; 608 dev->endpoint[EP2I(ep)].iso_error = 0; 609 DPRINTF2("iso-token-out ep %02X status %d len %zd\n", ep, status, 610 p->iov.size); 611 usbredir_handle_status(dev, p, status); 612 } 613 } 614 615 static void usbredir_stop_iso_stream(USBRedirDevice *dev, uint8_t ep) 616 { 617 struct usb_redir_stop_iso_stream_header stop_iso_stream = { 618 .endpoint = ep 619 }; 620 if (dev->endpoint[EP2I(ep)].iso_started) { 621 usbredirparser_send_stop_iso_stream(dev->parser, 0, &stop_iso_stream); 622 DPRINTF("iso stream stopped ep %02X\n", ep); 623 dev->endpoint[EP2I(ep)].iso_started = 0; 624 } 625 dev->endpoint[EP2I(ep)].iso_error = 0; 626 usbredir_free_bufpq(dev, ep); 627 } 628 629 /* 630 * The usb-host may poll the endpoint faster then our guest, resulting in lots 631 * of smaller bulkp-s. The below buffered_bulk_in_complete* functions combine 632 * data from multiple bulkp-s into a single packet, avoiding bufpq overflows. 633 */ 634 static void usbredir_buffered_bulk_add_data_to_packet(USBRedirDevice *dev, 635 struct buf_packet *bulkp, int count, USBPacket *p, uint8_t ep) 636 { 637 usb_packet_copy(p, bulkp->data + bulkp->offset, count); 638 bulkp->offset += count; 639 if (bulkp->offset == bulkp->len) { 640 /* Store status in the last packet with data from this bulkp */ 641 usbredir_handle_status(dev, p, bulkp->status); 642 bufp_free(dev, bulkp, ep); 643 } 644 } 645 646 static void usbredir_buffered_bulk_in_complete_raw(USBRedirDevice *dev, 647 USBPacket *p, uint8_t ep) 648 { 649 struct buf_packet *bulkp; 650 int count; 651 652 while ((bulkp = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq)) && 653 p->actual_length < p->iov.size && p->status == USB_RET_SUCCESS) { 654 count = bulkp->len - bulkp->offset; 655 if (count > (p->iov.size - p->actual_length)) { 656 count = p->iov.size - p->actual_length; 657 } 658 usbredir_buffered_bulk_add_data_to_packet(dev, bulkp, count, p, ep); 659 } 660 } 661 662 static void usbredir_buffered_bulk_in_complete_ftdi(USBRedirDevice *dev, 663 USBPacket *p, uint8_t ep) 664 { 665 const int maxp = dev->endpoint[EP2I(ep)].max_packet_size; 666 uint8_t header[2] = { 0, 0 }; 667 struct buf_packet *bulkp; 668 int count; 669 670 while ((bulkp = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq)) && 671 p->actual_length < p->iov.size && p->status == USB_RET_SUCCESS) { 672 if (bulkp->len < 2) { 673 WARNING("malformed ftdi bulk in packet\n"); 674 bufp_free(dev, bulkp, ep); 675 continue; 676 } 677 678 if ((p->actual_length % maxp) == 0) { 679 usb_packet_copy(p, bulkp->data, 2); 680 memcpy(header, bulkp->data, 2); 681 } else { 682 if (bulkp->data[0] != header[0] || bulkp->data[1] != header[1]) { 683 break; /* Different header, add to next packet */ 684 } 685 } 686 687 if (bulkp->offset == 0) { 688 bulkp->offset = 2; /* Skip header */ 689 } 690 count = bulkp->len - bulkp->offset; 691 /* Must repeat the header at maxp interval */ 692 if (count > (maxp - (p->actual_length % maxp))) { 693 count = maxp - (p->actual_length % maxp); 694 } 695 usbredir_buffered_bulk_add_data_to_packet(dev, bulkp, count, p, ep); 696 } 697 } 698 699 static void usbredir_buffered_bulk_in_complete(USBRedirDevice *dev, 700 USBPacket *p, uint8_t ep) 701 { 702 p->status = USB_RET_SUCCESS; /* Clear previous ASYNC status */ 703 dev->buffered_bulk_in_complete(dev, p, ep); 704 DPRINTF("bulk-token-in ep %02X status %d len %d id %"PRIu64"\n", 705 ep, p->status, p->actual_length, p->id); 706 } 707 708 static void usbredir_handle_buffered_bulk_in_data(USBRedirDevice *dev, 709 USBPacket *p, uint8_t ep) 710 { 711 /* Input bulk endpoint, buffered packet input */ 712 if (!dev->endpoint[EP2I(ep)].bulk_receiving_started) { 713 int bpt; 714 struct usb_redir_start_bulk_receiving_header start = { 715 .endpoint = ep, 716 .stream_id = 0, 717 .no_transfers = 5, 718 }; 719 /* Round bytes_per_transfer up to a multiple of max_packet_size */ 720 bpt = 512 + dev->endpoint[EP2I(ep)].max_packet_size - 1; 721 bpt /= dev->endpoint[EP2I(ep)].max_packet_size; 722 bpt *= dev->endpoint[EP2I(ep)].max_packet_size; 723 start.bytes_per_transfer = bpt; 724 /* No id, we look at the ep when receiving a status back */ 725 usbredirparser_send_start_bulk_receiving(dev->parser, 0, &start); 726 usbredirparser_do_write(dev->parser); 727 DPRINTF("bulk receiving started bytes/transfer %u count %d ep %02X\n", 728 start.bytes_per_transfer, start.no_transfers, ep); 729 dev->endpoint[EP2I(ep)].bulk_receiving_started = 1; 730 /* We don't really want to drop bulk packets ever, but 731 having some upper limit to how much we buffer is good. */ 732 dev->endpoint[EP2I(ep)].bufpq_target_size = 5000; 733 dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0; 734 } 735 736 if (QTAILQ_EMPTY(&dev->endpoint[EP2I(ep)].bufpq)) { 737 DPRINTF("bulk-token-in ep %02X, no bulkp\n", ep); 738 assert(dev->endpoint[EP2I(ep)].pending_async_packet == NULL); 739 dev->endpoint[EP2I(ep)].pending_async_packet = p; 740 p->status = USB_RET_ASYNC; 741 return; 742 } 743 usbredir_buffered_bulk_in_complete(dev, p, ep); 744 } 745 746 static void usbredir_stop_bulk_receiving(USBRedirDevice *dev, uint8_t ep) 747 { 748 struct usb_redir_stop_bulk_receiving_header stop_bulk = { 749 .endpoint = ep, 750 .stream_id = 0, 751 }; 752 if (dev->endpoint[EP2I(ep)].bulk_receiving_started) { 753 usbredirparser_send_stop_bulk_receiving(dev->parser, 0, &stop_bulk); 754 DPRINTF("bulk receiving stopped ep %02X\n", ep); 755 dev->endpoint[EP2I(ep)].bulk_receiving_started = 0; 756 } 757 usbredir_free_bufpq(dev, ep); 758 } 759 760 static void usbredir_handle_bulk_data(USBRedirDevice *dev, USBPacket *p, 761 uint8_t ep) 762 { 763 struct usb_redir_bulk_packet_header bulk_packet; 764 size_t size = usb_packet_size(p); 765 const int maxp = dev->endpoint[EP2I(ep)].max_packet_size; 766 767 if (usbredir_already_in_flight(dev, p->id)) { 768 p->status = USB_RET_ASYNC; 769 return; 770 } 771 772 if (dev->endpoint[EP2I(ep)].bulk_receiving_enabled) { 773 if (size != 0 && (size % maxp) == 0) { 774 usbredir_handle_buffered_bulk_in_data(dev, p, ep); 775 return; 776 } 777 WARNING("bulk recv invalid size %zd ep %02x, disabling\n", size, ep); 778 assert(dev->endpoint[EP2I(ep)].pending_async_packet == NULL); 779 usbredir_stop_bulk_receiving(dev, ep); 780 dev->endpoint[EP2I(ep)].bulk_receiving_enabled = 0; 781 } 782 783 DPRINTF("bulk-out ep %02X len %zd id %"PRIu64"\n", ep, size, p->id); 784 785 bulk_packet.endpoint = ep; 786 bulk_packet.length = size; 787 bulk_packet.stream_id = 0; 788 bulk_packet.length_high = size >> 16; 789 assert(bulk_packet.length_high == 0 || 790 usbredirparser_peer_has_cap(dev->parser, 791 usb_redir_cap_32bits_bulk_length)); 792 793 if (ep & USB_DIR_IN) { 794 usbredirparser_send_bulk_packet(dev->parser, p->id, 795 &bulk_packet, NULL, 0); 796 } else { 797 uint8_t buf[size]; 798 usb_packet_copy(p, buf, size); 799 usbredir_log_data(dev, "bulk data out:", buf, size); 800 usbredirparser_send_bulk_packet(dev->parser, p->id, 801 &bulk_packet, buf, size); 802 } 803 usbredirparser_do_write(dev->parser); 804 p->status = USB_RET_ASYNC; 805 } 806 807 static void usbredir_handle_interrupt_in_data(USBRedirDevice *dev, 808 USBPacket *p, uint8_t ep) 809 { 810 /* Input interrupt endpoint, buffered packet input */ 811 struct buf_packet *intp; 812 int status, len; 813 814 if (!dev->endpoint[EP2I(ep)].interrupt_started && 815 !dev->endpoint[EP2I(ep)].interrupt_error) { 816 struct usb_redir_start_interrupt_receiving_header start_int = { 817 .endpoint = ep, 818 }; 819 /* No id, we look at the ep when receiving a status back */ 820 usbredirparser_send_start_interrupt_receiving(dev->parser, 0, 821 &start_int); 822 usbredirparser_do_write(dev->parser); 823 DPRINTF("interrupt recv started ep %02X\n", ep); 824 dev->endpoint[EP2I(ep)].interrupt_started = 1; 825 /* We don't really want to drop interrupt packets ever, but 826 having some upper limit to how much we buffer is good. */ 827 dev->endpoint[EP2I(ep)].bufpq_target_size = 1000; 828 dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0; 829 } 830 831 intp = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq); 832 if (intp == NULL) { 833 DPRINTF2("interrupt-token-in ep %02X, no intp\n", ep); 834 /* Check interrupt_error for stream errors */ 835 status = dev->endpoint[EP2I(ep)].interrupt_error; 836 dev->endpoint[EP2I(ep)].interrupt_error = 0; 837 if (status) { 838 usbredir_handle_status(dev, p, status); 839 } else { 840 p->status = USB_RET_NAK; 841 } 842 return; 843 } 844 DPRINTF("interrupt-token-in ep %02X status %d len %d\n", ep, 845 intp->status, intp->len); 846 847 status = intp->status; 848 len = intp->len; 849 if (len > p->iov.size) { 850 ERROR("received int data is larger then packet ep %02X\n", ep); 851 len = p->iov.size; 852 status = usb_redir_babble; 853 } 854 usb_packet_copy(p, intp->data, len); 855 bufp_free(dev, intp, ep); 856 usbredir_handle_status(dev, p, status); 857 } 858 859 /* 860 * Handle interrupt out data, the usbredir protocol expects us to do this 861 * async, so that it can report back a completion status. But guests will 862 * expect immediate completion for an interrupt endpoint, and handling this 863 * async causes migration issues. So we report success directly, counting 864 * on the fact that output interrupt packets normally always succeed. 865 */ 866 static void usbredir_handle_interrupt_out_data(USBRedirDevice *dev, 867 USBPacket *p, uint8_t ep) 868 { 869 struct usb_redir_interrupt_packet_header interrupt_packet; 870 uint8_t buf[p->iov.size]; 871 872 DPRINTF("interrupt-out ep %02X len %zd id %"PRIu64"\n", ep, 873 p->iov.size, p->id); 874 875 interrupt_packet.endpoint = ep; 876 interrupt_packet.length = p->iov.size; 877 878 usb_packet_copy(p, buf, p->iov.size); 879 usbredir_log_data(dev, "interrupt data out:", buf, p->iov.size); 880 usbredirparser_send_interrupt_packet(dev->parser, p->id, 881 &interrupt_packet, buf, p->iov.size); 882 usbredirparser_do_write(dev->parser); 883 } 884 885 static void usbredir_stop_interrupt_receiving(USBRedirDevice *dev, 886 uint8_t ep) 887 { 888 struct usb_redir_stop_interrupt_receiving_header stop_interrupt_recv = { 889 .endpoint = ep 890 }; 891 if (dev->endpoint[EP2I(ep)].interrupt_started) { 892 usbredirparser_send_stop_interrupt_receiving(dev->parser, 0, 893 &stop_interrupt_recv); 894 DPRINTF("interrupt recv stopped ep %02X\n", ep); 895 dev->endpoint[EP2I(ep)].interrupt_started = 0; 896 } 897 dev->endpoint[EP2I(ep)].interrupt_error = 0; 898 usbredir_free_bufpq(dev, ep); 899 } 900 901 static void usbredir_handle_data(USBDevice *udev, USBPacket *p) 902 { 903 USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev); 904 uint8_t ep; 905 906 ep = p->ep->nr; 907 if (p->pid == USB_TOKEN_IN) { 908 ep |= USB_DIR_IN; 909 } 910 911 switch (dev->endpoint[EP2I(ep)].type) { 912 case USB_ENDPOINT_XFER_CONTROL: 913 ERROR("handle_data called for control transfer on ep %02X\n", ep); 914 p->status = USB_RET_NAK; 915 break; 916 case USB_ENDPOINT_XFER_BULK: 917 if (p->state == USB_PACKET_SETUP && p->pid == USB_TOKEN_IN && 918 p->ep->pipeline) { 919 p->status = USB_RET_ADD_TO_QUEUE; 920 break; 921 } 922 usbredir_handle_bulk_data(dev, p, ep); 923 break; 924 case USB_ENDPOINT_XFER_ISOC: 925 usbredir_handle_iso_data(dev, p, ep); 926 break; 927 case USB_ENDPOINT_XFER_INT: 928 if (ep & USB_DIR_IN) { 929 usbredir_handle_interrupt_in_data(dev, p, ep); 930 } else { 931 usbredir_handle_interrupt_out_data(dev, p, ep); 932 } 933 break; 934 default: 935 ERROR("handle_data ep %02X has unknown type %d\n", ep, 936 dev->endpoint[EP2I(ep)].type); 937 p->status = USB_RET_NAK; 938 } 939 } 940 941 static void usbredir_flush_ep_queue(USBDevice *dev, USBEndpoint *ep) 942 { 943 if (ep->pid == USB_TOKEN_IN && ep->pipeline) { 944 usb_ep_combine_input_packets(ep); 945 } 946 } 947 948 static void usbredir_stop_ep(USBRedirDevice *dev, int i) 949 { 950 uint8_t ep = I2EP(i); 951 952 switch (dev->endpoint[i].type) { 953 case USB_ENDPOINT_XFER_BULK: 954 if (ep & USB_DIR_IN) { 955 usbredir_stop_bulk_receiving(dev, ep); 956 } 957 break; 958 case USB_ENDPOINT_XFER_ISOC: 959 usbredir_stop_iso_stream(dev, ep); 960 break; 961 case USB_ENDPOINT_XFER_INT: 962 if (ep & USB_DIR_IN) { 963 usbredir_stop_interrupt_receiving(dev, ep); 964 } 965 break; 966 } 967 usbredir_free_bufpq(dev, ep); 968 } 969 970 static void usbredir_ep_stopped(USBDevice *udev, USBEndpoint *uep) 971 { 972 USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev); 973 974 usbredir_stop_ep(dev, USBEP2I(uep)); 975 usbredirparser_do_write(dev->parser); 976 } 977 978 static void usbredir_set_config(USBRedirDevice *dev, USBPacket *p, 979 int config) 980 { 981 struct usb_redir_set_configuration_header set_config; 982 int i; 983 984 DPRINTF("set config %d id %"PRIu64"\n", config, p->id); 985 986 for (i = 0; i < MAX_ENDPOINTS; i++) { 987 usbredir_stop_ep(dev, i); 988 } 989 990 set_config.configuration = config; 991 usbredirparser_send_set_configuration(dev->parser, p->id, &set_config); 992 usbredirparser_do_write(dev->parser); 993 p->status = USB_RET_ASYNC; 994 } 995 996 static void usbredir_get_config(USBRedirDevice *dev, USBPacket *p) 997 { 998 DPRINTF("get config id %"PRIu64"\n", p->id); 999 1000 usbredirparser_send_get_configuration(dev->parser, p->id); 1001 usbredirparser_do_write(dev->parser); 1002 p->status = USB_RET_ASYNC; 1003 } 1004 1005 static void usbredir_set_interface(USBRedirDevice *dev, USBPacket *p, 1006 int interface, int alt) 1007 { 1008 struct usb_redir_set_alt_setting_header set_alt; 1009 int i; 1010 1011 DPRINTF("set interface %d alt %d id %"PRIu64"\n", interface, alt, p->id); 1012 1013 for (i = 0; i < MAX_ENDPOINTS; i++) { 1014 if (dev->endpoint[i].interface == interface) { 1015 usbredir_stop_ep(dev, i); 1016 } 1017 } 1018 1019 set_alt.interface = interface; 1020 set_alt.alt = alt; 1021 usbredirparser_send_set_alt_setting(dev->parser, p->id, &set_alt); 1022 usbredirparser_do_write(dev->parser); 1023 p->status = USB_RET_ASYNC; 1024 } 1025 1026 static void usbredir_get_interface(USBRedirDevice *dev, USBPacket *p, 1027 int interface) 1028 { 1029 struct usb_redir_get_alt_setting_header get_alt; 1030 1031 DPRINTF("get interface %d id %"PRIu64"\n", interface, p->id); 1032 1033 get_alt.interface = interface; 1034 usbredirparser_send_get_alt_setting(dev->parser, p->id, &get_alt); 1035 usbredirparser_do_write(dev->parser); 1036 p->status = USB_RET_ASYNC; 1037 } 1038 1039 static void usbredir_handle_control(USBDevice *udev, USBPacket *p, 1040 int request, int value, int index, int length, uint8_t *data) 1041 { 1042 USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev); 1043 struct usb_redir_control_packet_header control_packet; 1044 1045 if (usbredir_already_in_flight(dev, p->id)) { 1046 p->status = USB_RET_ASYNC; 1047 return; 1048 } 1049 1050 /* Special cases for certain standard device requests */ 1051 switch (request) { 1052 case DeviceOutRequest | USB_REQ_SET_ADDRESS: 1053 DPRINTF("set address %d\n", value); 1054 dev->dev.addr = value; 1055 return; 1056 case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: 1057 usbredir_set_config(dev, p, value & 0xff); 1058 return; 1059 case DeviceRequest | USB_REQ_GET_CONFIGURATION: 1060 usbredir_get_config(dev, p); 1061 return; 1062 case InterfaceOutRequest | USB_REQ_SET_INTERFACE: 1063 usbredir_set_interface(dev, p, index, value); 1064 return; 1065 case InterfaceRequest | USB_REQ_GET_INTERFACE: 1066 usbredir_get_interface(dev, p, index); 1067 return; 1068 } 1069 1070 /* Normal ctrl requests, note request is (bRequestType << 8) | bRequest */ 1071 DPRINTF( 1072 "ctrl-out type 0x%x req 0x%x val 0x%x index %d len %d id %"PRIu64"\n", 1073 request >> 8, request & 0xff, value, index, length, p->id); 1074 1075 control_packet.request = request & 0xFF; 1076 control_packet.requesttype = request >> 8; 1077 control_packet.endpoint = control_packet.requesttype & USB_DIR_IN; 1078 control_packet.value = value; 1079 control_packet.index = index; 1080 control_packet.length = length; 1081 1082 if (control_packet.requesttype & USB_DIR_IN) { 1083 usbredirparser_send_control_packet(dev->parser, p->id, 1084 &control_packet, NULL, 0); 1085 } else { 1086 usbredir_log_data(dev, "ctrl data out:", data, length); 1087 usbredirparser_send_control_packet(dev->parser, p->id, 1088 &control_packet, data, length); 1089 } 1090 usbredirparser_do_write(dev->parser); 1091 p->status = USB_RET_ASYNC; 1092 } 1093 1094 /* 1095 * Close events can be triggered by usbredirparser_do_write which gets called 1096 * from within the USBDevice data / control packet callbacks and doing a 1097 * usb_detach from within these callbacks is not a good idea. 1098 * 1099 * So we use a bh handler to take care of close events. 1100 */ 1101 static void usbredir_chardev_close_bh(void *opaque) 1102 { 1103 USBRedirDevice *dev = opaque; 1104 1105 usbredir_device_disconnect(dev); 1106 1107 if (dev->parser) { 1108 DPRINTF("destroying usbredirparser\n"); 1109 usbredirparser_destroy(dev->parser); 1110 dev->parser = NULL; 1111 } 1112 if (dev->watch) { 1113 g_source_remove(dev->watch); 1114 dev->watch = 0; 1115 } 1116 } 1117 1118 static void usbredir_create_parser(USBRedirDevice *dev) 1119 { 1120 uint32_t caps[USB_REDIR_CAPS_SIZE] = { 0, }; 1121 int flags = 0; 1122 1123 DPRINTF("creating usbredirparser\n"); 1124 1125 dev->parser = qemu_oom_check(usbredirparser_create()); 1126 dev->parser->priv = dev; 1127 dev->parser->log_func = usbredir_log; 1128 dev->parser->read_func = usbredir_read; 1129 dev->parser->write_func = usbredir_write; 1130 dev->parser->hello_func = usbredir_hello; 1131 dev->parser->device_connect_func = usbredir_device_connect; 1132 dev->parser->device_disconnect_func = usbredir_device_disconnect; 1133 dev->parser->interface_info_func = usbredir_interface_info; 1134 dev->parser->ep_info_func = usbredir_ep_info; 1135 dev->parser->configuration_status_func = usbredir_configuration_status; 1136 dev->parser->alt_setting_status_func = usbredir_alt_setting_status; 1137 dev->parser->iso_stream_status_func = usbredir_iso_stream_status; 1138 dev->parser->interrupt_receiving_status_func = 1139 usbredir_interrupt_receiving_status; 1140 dev->parser->bulk_streams_status_func = usbredir_bulk_streams_status; 1141 dev->parser->bulk_receiving_status_func = usbredir_bulk_receiving_status; 1142 dev->parser->control_packet_func = usbredir_control_packet; 1143 dev->parser->bulk_packet_func = usbredir_bulk_packet; 1144 dev->parser->iso_packet_func = usbredir_iso_packet; 1145 dev->parser->interrupt_packet_func = usbredir_interrupt_packet; 1146 dev->parser->buffered_bulk_packet_func = usbredir_buffered_bulk_packet; 1147 dev->read_buf = NULL; 1148 dev->read_buf_size = 0; 1149 1150 usbredirparser_caps_set_cap(caps, usb_redir_cap_connect_device_version); 1151 usbredirparser_caps_set_cap(caps, usb_redir_cap_filter); 1152 usbredirparser_caps_set_cap(caps, usb_redir_cap_ep_info_max_packet_size); 1153 usbredirparser_caps_set_cap(caps, usb_redir_cap_64bits_ids); 1154 usbredirparser_caps_set_cap(caps, usb_redir_cap_32bits_bulk_length); 1155 usbredirparser_caps_set_cap(caps, usb_redir_cap_bulk_receiving); 1156 1157 if (runstate_check(RUN_STATE_INMIGRATE)) { 1158 flags |= usbredirparser_fl_no_hello; 1159 } 1160 usbredirparser_init(dev->parser, VERSION, caps, USB_REDIR_CAPS_SIZE, 1161 flags); 1162 usbredirparser_do_write(dev->parser); 1163 } 1164 1165 static void usbredir_reject_device(USBRedirDevice *dev) 1166 { 1167 usbredir_device_disconnect(dev); 1168 if (usbredirparser_peer_has_cap(dev->parser, usb_redir_cap_filter)) { 1169 usbredirparser_send_filter_reject(dev->parser); 1170 usbredirparser_do_write(dev->parser); 1171 } 1172 } 1173 1174 static void usbredir_do_attach(void *opaque) 1175 { 1176 USBRedirDevice *dev = opaque; 1177 1178 /* In order to work properly with XHCI controllers we need these caps */ 1179 if ((dev->dev.port->speedmask & USB_SPEED_MASK_SUPER) && !( 1180 usbredirparser_peer_has_cap(dev->parser, 1181 usb_redir_cap_ep_info_max_packet_size) && 1182 usbredirparser_peer_has_cap(dev->parser, 1183 usb_redir_cap_32bits_bulk_length) && 1184 usbredirparser_peer_has_cap(dev->parser, 1185 usb_redir_cap_64bits_ids))) { 1186 ERROR("usb-redir-host lacks capabilities needed for use with XHCI\n"); 1187 usbredir_reject_device(dev); 1188 return; 1189 } 1190 1191 if (usb_device_attach(&dev->dev) != 0) { 1192 WARNING("rejecting device due to speed mismatch\n"); 1193 usbredir_reject_device(dev); 1194 } 1195 } 1196 1197 /* 1198 * chardev callbacks 1199 */ 1200 1201 static int usbredir_chardev_can_read(void *opaque) 1202 { 1203 USBRedirDevice *dev = opaque; 1204 1205 if (!dev->parser) { 1206 WARNING("chardev_can_read called on non open chardev!\n"); 1207 return 0; 1208 } 1209 1210 /* Don't read new data from the chardev until our state is fully synced */ 1211 if (!runstate_check(RUN_STATE_RUNNING)) { 1212 return 0; 1213 } 1214 1215 /* usbredir_parser_do_read will consume *all* data we give it */ 1216 return 1024 * 1024; 1217 } 1218 1219 static void usbredir_chardev_read(void *opaque, const uint8_t *buf, int size) 1220 { 1221 USBRedirDevice *dev = opaque; 1222 1223 /* No recursion allowed! */ 1224 assert(dev->read_buf == NULL); 1225 1226 dev->read_buf = buf; 1227 dev->read_buf_size = size; 1228 1229 usbredirparser_do_read(dev->parser); 1230 /* Send any acks, etc. which may be queued now */ 1231 usbredirparser_do_write(dev->parser); 1232 } 1233 1234 static void usbredir_chardev_event(void *opaque, int event) 1235 { 1236 USBRedirDevice *dev = opaque; 1237 1238 switch (event) { 1239 case CHR_EVENT_OPENED: 1240 DPRINTF("chardev open\n"); 1241 /* Make sure any pending closes are handled (no-op if none pending) */ 1242 usbredir_chardev_close_bh(dev); 1243 qemu_bh_cancel(dev->chardev_close_bh); 1244 usbredir_create_parser(dev); 1245 break; 1246 case CHR_EVENT_CLOSED: 1247 DPRINTF("chardev close\n"); 1248 qemu_bh_schedule(dev->chardev_close_bh); 1249 break; 1250 } 1251 } 1252 1253 /* 1254 * init + destroy 1255 */ 1256 1257 static void usbredir_vm_state_change(void *priv, int running, RunState state) 1258 { 1259 USBRedirDevice *dev = priv; 1260 1261 if (state == RUN_STATE_RUNNING && dev->parser != NULL) { 1262 usbredirparser_do_write(dev->parser); /* Flush any pending writes */ 1263 } 1264 } 1265 1266 static void usbredir_init_endpoints(USBRedirDevice *dev) 1267 { 1268 int i; 1269 1270 usb_ep_init(&dev->dev); 1271 memset(dev->endpoint, 0, sizeof(dev->endpoint)); 1272 for (i = 0; i < MAX_ENDPOINTS; i++) { 1273 dev->endpoint[i].dev = dev; 1274 QTAILQ_INIT(&dev->endpoint[i].bufpq); 1275 } 1276 } 1277 1278 static int usbredir_initfn(USBDevice *udev) 1279 { 1280 USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev); 1281 int i; 1282 1283 if (dev->cs == NULL) { 1284 qerror_report(QERR_MISSING_PARAMETER, "chardev"); 1285 return -1; 1286 } 1287 1288 if (dev->filter_str) { 1289 i = usbredirfilter_string_to_rules(dev->filter_str, ":", "|", 1290 &dev->filter_rules, 1291 &dev->filter_rules_count); 1292 if (i) { 1293 qerror_report(QERR_INVALID_PARAMETER_VALUE, "filter", 1294 "a usb device filter string"); 1295 return -1; 1296 } 1297 } 1298 1299 dev->chardev_close_bh = qemu_bh_new(usbredir_chardev_close_bh, dev); 1300 dev->attach_timer = qemu_new_timer_ms(vm_clock, usbredir_do_attach, dev); 1301 1302 packet_id_queue_init(&dev->cancelled, dev, "cancelled"); 1303 packet_id_queue_init(&dev->already_in_flight, dev, "already-in-flight"); 1304 usbredir_init_endpoints(dev); 1305 1306 /* We'll do the attach once we receive the speed from the usb-host */ 1307 udev->auto_attach = 0; 1308 1309 /* Will be cleared during setup when we find conflicts */ 1310 dev->compatible_speedmask = USB_SPEED_MASK_FULL | USB_SPEED_MASK_HIGH; 1311 1312 /* Let the backend know we are ready */ 1313 qemu_chr_add_handlers(dev->cs, usbredir_chardev_can_read, 1314 usbredir_chardev_read, usbredir_chardev_event, dev); 1315 1316 qemu_add_vm_change_state_handler(usbredir_vm_state_change, dev); 1317 add_boot_device_path(dev->bootindex, &udev->qdev, NULL); 1318 return 0; 1319 } 1320 1321 static void usbredir_cleanup_device_queues(USBRedirDevice *dev) 1322 { 1323 int i; 1324 1325 packet_id_queue_empty(&dev->cancelled); 1326 packet_id_queue_empty(&dev->already_in_flight); 1327 for (i = 0; i < MAX_ENDPOINTS; i++) { 1328 usbredir_free_bufpq(dev, I2EP(i)); 1329 } 1330 } 1331 1332 static void usbredir_handle_destroy(USBDevice *udev) 1333 { 1334 USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev); 1335 1336 qemu_chr_delete(dev->cs); 1337 /* Note must be done after qemu_chr_close, as that causes a close event */ 1338 qemu_bh_delete(dev->chardev_close_bh); 1339 1340 qemu_del_timer(dev->attach_timer); 1341 qemu_free_timer(dev->attach_timer); 1342 1343 usbredir_cleanup_device_queues(dev); 1344 1345 if (dev->parser) { 1346 usbredirparser_destroy(dev->parser); 1347 } 1348 if (dev->watch) { 1349 g_source_remove(dev->watch); 1350 } 1351 1352 free(dev->filter_rules); 1353 } 1354 1355 static int usbredir_check_filter(USBRedirDevice *dev) 1356 { 1357 if (dev->interface_info.interface_count == NO_INTERFACE_INFO) { 1358 ERROR("No interface info for device\n"); 1359 goto error; 1360 } 1361 1362 if (dev->filter_rules) { 1363 if (!usbredirparser_peer_has_cap(dev->parser, 1364 usb_redir_cap_connect_device_version)) { 1365 ERROR("Device filter specified and peer does not have the " 1366 "connect_device_version capability\n"); 1367 goto error; 1368 } 1369 1370 if (usbredirfilter_check( 1371 dev->filter_rules, 1372 dev->filter_rules_count, 1373 dev->device_info.device_class, 1374 dev->device_info.device_subclass, 1375 dev->device_info.device_protocol, 1376 dev->interface_info.interface_class, 1377 dev->interface_info.interface_subclass, 1378 dev->interface_info.interface_protocol, 1379 dev->interface_info.interface_count, 1380 dev->device_info.vendor_id, 1381 dev->device_info.product_id, 1382 dev->device_info.device_version_bcd, 1383 0) != 0) { 1384 goto error; 1385 } 1386 } 1387 1388 return 0; 1389 1390 error: 1391 usbredir_reject_device(dev); 1392 return -1; 1393 } 1394 1395 static void usbredir_check_bulk_receiving(USBRedirDevice *dev) 1396 { 1397 int i, j, quirks; 1398 1399 if (!usbredirparser_peer_has_cap(dev->parser, 1400 usb_redir_cap_bulk_receiving)) { 1401 return; 1402 } 1403 1404 for (i = EP2I(USB_DIR_IN); i < MAX_ENDPOINTS; i++) { 1405 dev->endpoint[i].bulk_receiving_enabled = 0; 1406 } 1407 for (i = 0; i < dev->interface_info.interface_count; i++) { 1408 quirks = usb_get_quirks(dev->device_info.vendor_id, 1409 dev->device_info.product_id, 1410 dev->interface_info.interface_class[i], 1411 dev->interface_info.interface_subclass[i], 1412 dev->interface_info.interface_protocol[i]); 1413 if (!(quirks & USB_QUIRK_BUFFER_BULK_IN)) { 1414 continue; 1415 } 1416 if (quirks & USB_QUIRK_IS_FTDI) { 1417 dev->buffered_bulk_in_complete = 1418 usbredir_buffered_bulk_in_complete_ftdi; 1419 } else { 1420 dev->buffered_bulk_in_complete = 1421 usbredir_buffered_bulk_in_complete_raw; 1422 } 1423 1424 for (j = EP2I(USB_DIR_IN); j < MAX_ENDPOINTS; j++) { 1425 if (dev->endpoint[j].interface == 1426 dev->interface_info.interface[i] && 1427 dev->endpoint[j].type == USB_ENDPOINT_XFER_BULK && 1428 dev->endpoint[j].max_packet_size != 0) { 1429 dev->endpoint[j].bulk_receiving_enabled = 1; 1430 /* 1431 * With buffering pipelining is not necessary. Also packet 1432 * combining and bulk in buffering don't play nice together! 1433 */ 1434 I2USBEP(dev, j)->pipeline = false; 1435 break; /* Only buffer for the first ep of each intf */ 1436 } 1437 } 1438 } 1439 } 1440 1441 /* 1442 * usbredirparser packet complete callbacks 1443 */ 1444 1445 static void usbredir_handle_status(USBRedirDevice *dev, USBPacket *p, 1446 int status) 1447 { 1448 switch (status) { 1449 case usb_redir_success: 1450 p->status = USB_RET_SUCCESS; /* Clear previous ASYNC status */ 1451 break; 1452 case usb_redir_stall: 1453 p->status = USB_RET_STALL; 1454 break; 1455 case usb_redir_cancelled: 1456 /* 1457 * When the usbredir-host unredirects a device, it will report a status 1458 * of cancelled for all pending packets, followed by a disconnect msg. 1459 */ 1460 p->status = USB_RET_IOERROR; 1461 break; 1462 case usb_redir_inval: 1463 WARNING("got invalid param error from usb-host?\n"); 1464 p->status = USB_RET_IOERROR; 1465 break; 1466 case usb_redir_babble: 1467 p->status = USB_RET_BABBLE; 1468 break; 1469 case usb_redir_ioerror: 1470 case usb_redir_timeout: 1471 default: 1472 p->status = USB_RET_IOERROR; 1473 } 1474 } 1475 1476 static void usbredir_hello(void *priv, struct usb_redir_hello_header *h) 1477 { 1478 USBRedirDevice *dev = priv; 1479 1480 /* Try to send the filter info now that we've the usb-host's caps */ 1481 if (usbredirparser_peer_has_cap(dev->parser, usb_redir_cap_filter) && 1482 dev->filter_rules) { 1483 usbredirparser_send_filter_filter(dev->parser, dev->filter_rules, 1484 dev->filter_rules_count); 1485 usbredirparser_do_write(dev->parser); 1486 } 1487 } 1488 1489 static void usbredir_device_connect(void *priv, 1490 struct usb_redir_device_connect_header *device_connect) 1491 { 1492 USBRedirDevice *dev = priv; 1493 const char *speed; 1494 1495 if (qemu_timer_pending(dev->attach_timer) || dev->dev.attached) { 1496 ERROR("Received device connect while already connected\n"); 1497 return; 1498 } 1499 1500 switch (device_connect->speed) { 1501 case usb_redir_speed_low: 1502 speed = "low speed"; 1503 dev->dev.speed = USB_SPEED_LOW; 1504 dev->compatible_speedmask &= ~USB_SPEED_MASK_FULL; 1505 dev->compatible_speedmask &= ~USB_SPEED_MASK_HIGH; 1506 break; 1507 case usb_redir_speed_full: 1508 speed = "full speed"; 1509 dev->dev.speed = USB_SPEED_FULL; 1510 dev->compatible_speedmask &= ~USB_SPEED_MASK_HIGH; 1511 break; 1512 case usb_redir_speed_high: 1513 speed = "high speed"; 1514 dev->dev.speed = USB_SPEED_HIGH; 1515 break; 1516 case usb_redir_speed_super: 1517 speed = "super speed"; 1518 dev->dev.speed = USB_SPEED_SUPER; 1519 break; 1520 default: 1521 speed = "unknown speed"; 1522 dev->dev.speed = USB_SPEED_FULL; 1523 } 1524 1525 if (usbredirparser_peer_has_cap(dev->parser, 1526 usb_redir_cap_connect_device_version)) { 1527 INFO("attaching %s device %04x:%04x version %d.%d class %02x\n", 1528 speed, device_connect->vendor_id, device_connect->product_id, 1529 ((device_connect->device_version_bcd & 0xf000) >> 12) * 10 + 1530 ((device_connect->device_version_bcd & 0x0f00) >> 8), 1531 ((device_connect->device_version_bcd & 0x00f0) >> 4) * 10 + 1532 ((device_connect->device_version_bcd & 0x000f) >> 0), 1533 device_connect->device_class); 1534 } else { 1535 INFO("attaching %s device %04x:%04x class %02x\n", speed, 1536 device_connect->vendor_id, device_connect->product_id, 1537 device_connect->device_class); 1538 } 1539 1540 dev->dev.speedmask = (1 << dev->dev.speed) | dev->compatible_speedmask; 1541 dev->device_info = *device_connect; 1542 1543 if (usbredir_check_filter(dev)) { 1544 WARNING("Device %04x:%04x rejected by device filter, not attaching\n", 1545 device_connect->vendor_id, device_connect->product_id); 1546 return; 1547 } 1548 1549 usbredir_check_bulk_receiving(dev); 1550 qemu_mod_timer(dev->attach_timer, dev->next_attach_time); 1551 } 1552 1553 static void usbredir_device_disconnect(void *priv) 1554 { 1555 USBRedirDevice *dev = priv; 1556 1557 /* Stop any pending attaches */ 1558 qemu_del_timer(dev->attach_timer); 1559 1560 if (dev->dev.attached) { 1561 DPRINTF("detaching device\n"); 1562 usb_device_detach(&dev->dev); 1563 /* 1564 * Delay next usb device attach to give the guest a chance to see 1565 * see the detach / attach in case of quick close / open succession 1566 */ 1567 dev->next_attach_time = qemu_get_clock_ms(vm_clock) + 200; 1568 } 1569 1570 /* Reset state so that the next dev connected starts with a clean slate */ 1571 usbredir_cleanup_device_queues(dev); 1572 usbredir_init_endpoints(dev); 1573 dev->interface_info.interface_count = NO_INTERFACE_INFO; 1574 dev->dev.addr = 0; 1575 dev->dev.speed = 0; 1576 dev->compatible_speedmask = USB_SPEED_MASK_FULL | USB_SPEED_MASK_HIGH; 1577 } 1578 1579 static void usbredir_interface_info(void *priv, 1580 struct usb_redir_interface_info_header *interface_info) 1581 { 1582 USBRedirDevice *dev = priv; 1583 1584 dev->interface_info = *interface_info; 1585 1586 /* 1587 * If we receive interface info after the device has already been 1588 * connected (ie on a set_config), re-check interface dependent things. 1589 */ 1590 if (qemu_timer_pending(dev->attach_timer) || dev->dev.attached) { 1591 usbredir_check_bulk_receiving(dev); 1592 if (usbredir_check_filter(dev)) { 1593 ERROR("Device no longer matches filter after interface info " 1594 "change, disconnecting!\n"); 1595 } 1596 } 1597 } 1598 1599 static void usbredir_mark_speed_incompatible(USBRedirDevice *dev, int speed) 1600 { 1601 dev->compatible_speedmask &= ~(1 << speed); 1602 dev->dev.speedmask = (1 << dev->dev.speed) | dev->compatible_speedmask; 1603 } 1604 1605 static void usbredir_set_pipeline(USBRedirDevice *dev, struct USBEndpoint *uep) 1606 { 1607 if (uep->type != USB_ENDPOINT_XFER_BULK) { 1608 return; 1609 } 1610 if (uep->pid == USB_TOKEN_OUT) { 1611 uep->pipeline = true; 1612 } 1613 if (uep->pid == USB_TOKEN_IN && uep->max_packet_size != 0 && 1614 usbredirparser_peer_has_cap(dev->parser, 1615 usb_redir_cap_32bits_bulk_length)) { 1616 uep->pipeline = true; 1617 } 1618 } 1619 1620 static void usbredir_setup_usb_eps(USBRedirDevice *dev) 1621 { 1622 struct USBEndpoint *usb_ep; 1623 int i; 1624 1625 for (i = 0; i < MAX_ENDPOINTS; i++) { 1626 usb_ep = I2USBEP(dev, i); 1627 usb_ep->type = dev->endpoint[i].type; 1628 usb_ep->ifnum = dev->endpoint[i].interface; 1629 usb_ep->max_packet_size = dev->endpoint[i].max_packet_size; 1630 usbredir_set_pipeline(dev, usb_ep); 1631 } 1632 } 1633 1634 static void usbredir_ep_info(void *priv, 1635 struct usb_redir_ep_info_header *ep_info) 1636 { 1637 USBRedirDevice *dev = priv; 1638 int i; 1639 1640 for (i = 0; i < MAX_ENDPOINTS; i++) { 1641 dev->endpoint[i].type = ep_info->type[i]; 1642 dev->endpoint[i].interval = ep_info->interval[i]; 1643 dev->endpoint[i].interface = ep_info->interface[i]; 1644 if (usbredirparser_peer_has_cap(dev->parser, 1645 usb_redir_cap_ep_info_max_packet_size)) { 1646 dev->endpoint[i].max_packet_size = ep_info->max_packet_size[i]; 1647 } 1648 switch (dev->endpoint[i].type) { 1649 case usb_redir_type_invalid: 1650 break; 1651 case usb_redir_type_iso: 1652 usbredir_mark_speed_incompatible(dev, USB_SPEED_FULL); 1653 usbredir_mark_speed_incompatible(dev, USB_SPEED_HIGH); 1654 /* Fall through */ 1655 case usb_redir_type_interrupt: 1656 if (!usbredirparser_peer_has_cap(dev->parser, 1657 usb_redir_cap_ep_info_max_packet_size) || 1658 ep_info->max_packet_size[i] > 64) { 1659 usbredir_mark_speed_incompatible(dev, USB_SPEED_FULL); 1660 } 1661 if (!usbredirparser_peer_has_cap(dev->parser, 1662 usb_redir_cap_ep_info_max_packet_size) || 1663 ep_info->max_packet_size[i] > 1024) { 1664 usbredir_mark_speed_incompatible(dev, USB_SPEED_HIGH); 1665 } 1666 if (dev->endpoint[i].interval == 0) { 1667 ERROR("Received 0 interval for isoc or irq endpoint\n"); 1668 usbredir_reject_device(dev); 1669 return; 1670 } 1671 /* Fall through */ 1672 case usb_redir_type_control: 1673 case usb_redir_type_bulk: 1674 DPRINTF("ep: %02X type: %d interface: %d\n", I2EP(i), 1675 dev->endpoint[i].type, dev->endpoint[i].interface); 1676 break; 1677 default: 1678 ERROR("Received invalid endpoint type\n"); 1679 usbredir_reject_device(dev); 1680 return; 1681 } 1682 } 1683 /* The new ep info may have caused a speed incompatibility, recheck */ 1684 if (dev->dev.attached && 1685 !(dev->dev.port->speedmask & dev->dev.speedmask)) { 1686 ERROR("Device no longer matches speed after endpoint info change, " 1687 "disconnecting!\n"); 1688 usbredir_reject_device(dev); 1689 return; 1690 } 1691 usbredir_setup_usb_eps(dev); 1692 usbredir_check_bulk_receiving(dev); 1693 } 1694 1695 static void usbredir_configuration_status(void *priv, uint64_t id, 1696 struct usb_redir_configuration_status_header *config_status) 1697 { 1698 USBRedirDevice *dev = priv; 1699 USBPacket *p; 1700 1701 DPRINTF("set config status %d config %d id %"PRIu64"\n", 1702 config_status->status, config_status->configuration, id); 1703 1704 p = usbredir_find_packet_by_id(dev, 0, id); 1705 if (p) { 1706 if (dev->dev.setup_buf[0] & USB_DIR_IN) { 1707 dev->dev.data_buf[0] = config_status->configuration; 1708 p->actual_length = 1; 1709 } 1710 usbredir_handle_status(dev, p, config_status->status); 1711 usb_generic_async_ctrl_complete(&dev->dev, p); 1712 } 1713 } 1714 1715 static void usbredir_alt_setting_status(void *priv, uint64_t id, 1716 struct usb_redir_alt_setting_status_header *alt_setting_status) 1717 { 1718 USBRedirDevice *dev = priv; 1719 USBPacket *p; 1720 1721 DPRINTF("alt status %d intf %d alt %d id: %"PRIu64"\n", 1722 alt_setting_status->status, alt_setting_status->interface, 1723 alt_setting_status->alt, id); 1724 1725 p = usbredir_find_packet_by_id(dev, 0, id); 1726 if (p) { 1727 if (dev->dev.setup_buf[0] & USB_DIR_IN) { 1728 dev->dev.data_buf[0] = alt_setting_status->alt; 1729 p->actual_length = 1; 1730 } 1731 usbredir_handle_status(dev, p, alt_setting_status->status); 1732 usb_generic_async_ctrl_complete(&dev->dev, p); 1733 } 1734 } 1735 1736 static void usbredir_iso_stream_status(void *priv, uint64_t id, 1737 struct usb_redir_iso_stream_status_header *iso_stream_status) 1738 { 1739 USBRedirDevice *dev = priv; 1740 uint8_t ep = iso_stream_status->endpoint; 1741 1742 DPRINTF("iso status %d ep %02X id %"PRIu64"\n", iso_stream_status->status, 1743 ep, id); 1744 1745 if (!dev->dev.attached || !dev->endpoint[EP2I(ep)].iso_started) { 1746 return; 1747 } 1748 1749 dev->endpoint[EP2I(ep)].iso_error = iso_stream_status->status; 1750 if (iso_stream_status->status == usb_redir_stall) { 1751 DPRINTF("iso stream stopped by peer ep %02X\n", ep); 1752 dev->endpoint[EP2I(ep)].iso_started = 0; 1753 } 1754 } 1755 1756 static void usbredir_interrupt_receiving_status(void *priv, uint64_t id, 1757 struct usb_redir_interrupt_receiving_status_header 1758 *interrupt_receiving_status) 1759 { 1760 USBRedirDevice *dev = priv; 1761 uint8_t ep = interrupt_receiving_status->endpoint; 1762 1763 DPRINTF("interrupt recv status %d ep %02X id %"PRIu64"\n", 1764 interrupt_receiving_status->status, ep, id); 1765 1766 if (!dev->dev.attached || !dev->endpoint[EP2I(ep)].interrupt_started) { 1767 return; 1768 } 1769 1770 dev->endpoint[EP2I(ep)].interrupt_error = 1771 interrupt_receiving_status->status; 1772 if (interrupt_receiving_status->status == usb_redir_stall) { 1773 DPRINTF("interrupt receiving stopped by peer ep %02X\n", ep); 1774 dev->endpoint[EP2I(ep)].interrupt_started = 0; 1775 } 1776 } 1777 1778 static void usbredir_bulk_streams_status(void *priv, uint64_t id, 1779 struct usb_redir_bulk_streams_status_header *bulk_streams_status) 1780 { 1781 } 1782 1783 static void usbredir_bulk_receiving_status(void *priv, uint64_t id, 1784 struct usb_redir_bulk_receiving_status_header *bulk_receiving_status) 1785 { 1786 USBRedirDevice *dev = priv; 1787 uint8_t ep = bulk_receiving_status->endpoint; 1788 1789 DPRINTF("bulk recv status %d ep %02X id %"PRIu64"\n", 1790 bulk_receiving_status->status, ep, id); 1791 1792 if (!dev->dev.attached || !dev->endpoint[EP2I(ep)].bulk_receiving_started) { 1793 return; 1794 } 1795 1796 if (bulk_receiving_status->status == usb_redir_stall) { 1797 DPRINTF("bulk receiving stopped by peer ep %02X\n", ep); 1798 dev->endpoint[EP2I(ep)].bulk_receiving_started = 0; 1799 } 1800 } 1801 1802 static void usbredir_control_packet(void *priv, uint64_t id, 1803 struct usb_redir_control_packet_header *control_packet, 1804 uint8_t *data, int data_len) 1805 { 1806 USBRedirDevice *dev = priv; 1807 USBPacket *p; 1808 int len = control_packet->length; 1809 1810 DPRINTF("ctrl-in status %d len %d id %"PRIu64"\n", control_packet->status, 1811 len, id); 1812 1813 /* Fix up USB-3 ep0 maxpacket size to allow superspeed connected devices 1814 * to work redirected to a not superspeed capable hcd */ 1815 if (dev->dev.speed == USB_SPEED_SUPER && 1816 !((dev->dev.port->speedmask & USB_SPEED_MASK_SUPER)) && 1817 control_packet->requesttype == 0x80 && 1818 control_packet->request == 6 && 1819 control_packet->value == 0x100 && control_packet->index == 0 && 1820 data_len >= 18 && data[7] == 9) { 1821 data[7] = 64; 1822 } 1823 1824 p = usbredir_find_packet_by_id(dev, 0, id); 1825 if (p) { 1826 usbredir_handle_status(dev, p, control_packet->status); 1827 if (data_len > 0) { 1828 usbredir_log_data(dev, "ctrl data in:", data, data_len); 1829 if (data_len > sizeof(dev->dev.data_buf)) { 1830 ERROR("ctrl buffer too small (%d > %zu)\n", 1831 data_len, sizeof(dev->dev.data_buf)); 1832 p->status = USB_RET_STALL; 1833 data_len = len = sizeof(dev->dev.data_buf); 1834 } 1835 memcpy(dev->dev.data_buf, data, data_len); 1836 } 1837 p->actual_length = len; 1838 usb_generic_async_ctrl_complete(&dev->dev, p); 1839 } 1840 free(data); 1841 } 1842 1843 static void usbredir_bulk_packet(void *priv, uint64_t id, 1844 struct usb_redir_bulk_packet_header *bulk_packet, 1845 uint8_t *data, int data_len) 1846 { 1847 USBRedirDevice *dev = priv; 1848 uint8_t ep = bulk_packet->endpoint; 1849 int len = (bulk_packet->length_high << 16) | bulk_packet->length; 1850 USBPacket *p; 1851 1852 DPRINTF("bulk-in status %d ep %02X len %d id %"PRIu64"\n", 1853 bulk_packet->status, ep, len, id); 1854 1855 p = usbredir_find_packet_by_id(dev, ep, id); 1856 if (p) { 1857 size_t size = usb_packet_size(p); 1858 usbredir_handle_status(dev, p, bulk_packet->status); 1859 if (data_len > 0) { 1860 usbredir_log_data(dev, "bulk data in:", data, data_len); 1861 if (data_len > size) { 1862 ERROR("bulk got more data then requested (%d > %zd)\n", 1863 data_len, p->iov.size); 1864 p->status = USB_RET_BABBLE; 1865 data_len = len = size; 1866 } 1867 usb_packet_copy(p, data, data_len); 1868 } 1869 p->actual_length = len; 1870 if (p->pid == USB_TOKEN_IN && p->ep->pipeline) { 1871 usb_combined_input_packet_complete(&dev->dev, p); 1872 } else { 1873 usb_packet_complete(&dev->dev, p); 1874 } 1875 } 1876 free(data); 1877 } 1878 1879 static void usbredir_iso_packet(void *priv, uint64_t id, 1880 struct usb_redir_iso_packet_header *iso_packet, 1881 uint8_t *data, int data_len) 1882 { 1883 USBRedirDevice *dev = priv; 1884 uint8_t ep = iso_packet->endpoint; 1885 1886 DPRINTF2("iso-in status %d ep %02X len %d id %"PRIu64"\n", 1887 iso_packet->status, ep, data_len, id); 1888 1889 if (dev->endpoint[EP2I(ep)].type != USB_ENDPOINT_XFER_ISOC) { 1890 ERROR("received iso packet for non iso endpoint %02X\n", ep); 1891 free(data); 1892 return; 1893 } 1894 1895 if (dev->endpoint[EP2I(ep)].iso_started == 0) { 1896 DPRINTF("received iso packet for non started stream ep %02X\n", ep); 1897 free(data); 1898 return; 1899 } 1900 1901 /* bufp_alloc also adds the packet to the ep queue */ 1902 bufp_alloc(dev, data, data_len, iso_packet->status, ep, data); 1903 } 1904 1905 static void usbredir_interrupt_packet(void *priv, uint64_t id, 1906 struct usb_redir_interrupt_packet_header *interrupt_packet, 1907 uint8_t *data, int data_len) 1908 { 1909 USBRedirDevice *dev = priv; 1910 uint8_t ep = interrupt_packet->endpoint; 1911 1912 DPRINTF("interrupt-in status %d ep %02X len %d id %"PRIu64"\n", 1913 interrupt_packet->status, ep, data_len, id); 1914 1915 if (dev->endpoint[EP2I(ep)].type != USB_ENDPOINT_XFER_INT) { 1916 ERROR("received int packet for non interrupt endpoint %02X\n", ep); 1917 free(data); 1918 return; 1919 } 1920 1921 if (ep & USB_DIR_IN) { 1922 if (dev->endpoint[EP2I(ep)].interrupt_started == 0) { 1923 DPRINTF("received int packet while not started ep %02X\n", ep); 1924 free(data); 1925 return; 1926 } 1927 1928 if (QTAILQ_EMPTY(&dev->endpoint[EP2I(ep)].bufpq)) { 1929 usb_wakeup(usb_ep_get(&dev->dev, USB_TOKEN_IN, ep & 0x0f), 0); 1930 } 1931 1932 /* bufp_alloc also adds the packet to the ep queue */ 1933 bufp_alloc(dev, data, data_len, interrupt_packet->status, ep, data); 1934 } else { 1935 /* 1936 * We report output interrupt packets as completed directly upon 1937 * submission, so all we can do here if one failed is warn. 1938 */ 1939 if (interrupt_packet->status) { 1940 WARNING("interrupt output failed status %d ep %02X id %"PRIu64"\n", 1941 interrupt_packet->status, ep, id); 1942 } 1943 } 1944 } 1945 1946 static void usbredir_buffered_bulk_packet(void *priv, uint64_t id, 1947 struct usb_redir_buffered_bulk_packet_header *buffered_bulk_packet, 1948 uint8_t *data, int data_len) 1949 { 1950 USBRedirDevice *dev = priv; 1951 uint8_t status, ep = buffered_bulk_packet->endpoint; 1952 void *free_on_destroy; 1953 int i, len; 1954 1955 DPRINTF("buffered-bulk-in status %d ep %02X len %d id %"PRIu64"\n", 1956 buffered_bulk_packet->status, ep, data_len, id); 1957 1958 if (dev->endpoint[EP2I(ep)].type != USB_ENDPOINT_XFER_BULK) { 1959 ERROR("received buffered-bulk packet for non bulk ep %02X\n", ep); 1960 free(data); 1961 return; 1962 } 1963 1964 if (dev->endpoint[EP2I(ep)].bulk_receiving_started == 0) { 1965 DPRINTF("received buffered-bulk packet on not started ep %02X\n", ep); 1966 free(data); 1967 return; 1968 } 1969 1970 /* Data must be in maxp chunks for buffered_bulk_add_*_data_to_packet */ 1971 len = dev->endpoint[EP2I(ep)].max_packet_size; 1972 status = usb_redir_success; 1973 free_on_destroy = NULL; 1974 for (i = 0; i < data_len; i += len) { 1975 if (len >= (data_len - i)) { 1976 len = data_len - i; 1977 status = buffered_bulk_packet->status; 1978 free_on_destroy = data; 1979 } 1980 /* bufp_alloc also adds the packet to the ep queue */ 1981 bufp_alloc(dev, data + i, len, status, ep, free_on_destroy); 1982 } 1983 1984 if (dev->endpoint[EP2I(ep)].pending_async_packet) { 1985 USBPacket *p = dev->endpoint[EP2I(ep)].pending_async_packet; 1986 dev->endpoint[EP2I(ep)].pending_async_packet = NULL; 1987 usbredir_buffered_bulk_in_complete(dev, p, ep); 1988 usb_packet_complete(&dev->dev, p); 1989 } 1990 } 1991 1992 /* 1993 * Migration code 1994 */ 1995 1996 static void usbredir_pre_save(void *priv) 1997 { 1998 USBRedirDevice *dev = priv; 1999 2000 usbredir_fill_already_in_flight(dev); 2001 } 2002 2003 static int usbredir_post_load(void *priv, int version_id) 2004 { 2005 USBRedirDevice *dev = priv; 2006 2007 if (dev->parser == NULL) { 2008 return 0; 2009 } 2010 2011 switch (dev->device_info.speed) { 2012 case usb_redir_speed_low: 2013 dev->dev.speed = USB_SPEED_LOW; 2014 break; 2015 case usb_redir_speed_full: 2016 dev->dev.speed = USB_SPEED_FULL; 2017 break; 2018 case usb_redir_speed_high: 2019 dev->dev.speed = USB_SPEED_HIGH; 2020 break; 2021 case usb_redir_speed_super: 2022 dev->dev.speed = USB_SPEED_SUPER; 2023 break; 2024 default: 2025 dev->dev.speed = USB_SPEED_FULL; 2026 } 2027 dev->dev.speedmask = (1 << dev->dev.speed); 2028 2029 usbredir_setup_usb_eps(dev); 2030 usbredir_check_bulk_receiving(dev); 2031 2032 return 0; 2033 } 2034 2035 /* For usbredirparser migration */ 2036 static void usbredir_put_parser(QEMUFile *f, void *priv, size_t unused) 2037 { 2038 USBRedirDevice *dev = priv; 2039 uint8_t *data; 2040 int len; 2041 2042 if (dev->parser == NULL) { 2043 qemu_put_be32(f, 0); 2044 return; 2045 } 2046 2047 usbredirparser_serialize(dev->parser, &data, &len); 2048 qemu_oom_check(data); 2049 2050 qemu_put_be32(f, len); 2051 qemu_put_buffer(f, data, len); 2052 2053 free(data); 2054 } 2055 2056 static int usbredir_get_parser(QEMUFile *f, void *priv, size_t unused) 2057 { 2058 USBRedirDevice *dev = priv; 2059 uint8_t *data; 2060 int len, ret; 2061 2062 len = qemu_get_be32(f); 2063 if (len == 0) { 2064 return 0; 2065 } 2066 2067 /* 2068 * If our chardev is not open already at this point the usbredir connection 2069 * has been broken (non seamless migration, or restore from disk). 2070 * 2071 * In this case create a temporary parser to receive the migration data, 2072 * and schedule the close_bh to report the device as disconnected to the 2073 * guest and to destroy the parser again. 2074 */ 2075 if (dev->parser == NULL) { 2076 WARNING("usb-redir connection broken during migration\n"); 2077 usbredir_create_parser(dev); 2078 qemu_bh_schedule(dev->chardev_close_bh); 2079 } 2080 2081 data = g_malloc(len); 2082 qemu_get_buffer(f, data, len); 2083 2084 ret = usbredirparser_unserialize(dev->parser, data, len); 2085 2086 g_free(data); 2087 2088 return ret; 2089 } 2090 2091 static const VMStateInfo usbredir_parser_vmstate_info = { 2092 .name = "usb-redir-parser", 2093 .put = usbredir_put_parser, 2094 .get = usbredir_get_parser, 2095 }; 2096 2097 2098 /* For buffered packets (iso/irq) queue migration */ 2099 static void usbredir_put_bufpq(QEMUFile *f, void *priv, size_t unused) 2100 { 2101 struct endp_data *endp = priv; 2102 USBRedirDevice *dev = endp->dev; 2103 struct buf_packet *bufp; 2104 int len, i = 0; 2105 2106 qemu_put_be32(f, endp->bufpq_size); 2107 QTAILQ_FOREACH(bufp, &endp->bufpq, next) { 2108 len = bufp->len - bufp->offset; 2109 DPRINTF("put_bufpq %d/%d len %d status %d\n", i + 1, endp->bufpq_size, 2110 len, bufp->status); 2111 qemu_put_be32(f, len); 2112 qemu_put_be32(f, bufp->status); 2113 qemu_put_buffer(f, bufp->data + bufp->offset, len); 2114 i++; 2115 } 2116 assert(i == endp->bufpq_size); 2117 } 2118 2119 static int usbredir_get_bufpq(QEMUFile *f, void *priv, size_t unused) 2120 { 2121 struct endp_data *endp = priv; 2122 USBRedirDevice *dev = endp->dev; 2123 struct buf_packet *bufp; 2124 int i; 2125 2126 endp->bufpq_size = qemu_get_be32(f); 2127 for (i = 0; i < endp->bufpq_size; i++) { 2128 bufp = g_malloc(sizeof(struct buf_packet)); 2129 bufp->len = qemu_get_be32(f); 2130 bufp->status = qemu_get_be32(f); 2131 bufp->offset = 0; 2132 bufp->data = qemu_oom_check(malloc(bufp->len)); /* regular malloc! */ 2133 bufp->free_on_destroy = bufp->data; 2134 qemu_get_buffer(f, bufp->data, bufp->len); 2135 QTAILQ_INSERT_TAIL(&endp->bufpq, bufp, next); 2136 DPRINTF("get_bufpq %d/%d len %d status %d\n", i + 1, endp->bufpq_size, 2137 bufp->len, bufp->status); 2138 } 2139 return 0; 2140 } 2141 2142 static const VMStateInfo usbredir_ep_bufpq_vmstate_info = { 2143 .name = "usb-redir-bufpq", 2144 .put = usbredir_put_bufpq, 2145 .get = usbredir_get_bufpq, 2146 }; 2147 2148 2149 /* For endp_data migration */ 2150 static const VMStateDescription usbredir_bulk_receiving_vmstate = { 2151 .name = "usb-redir-ep/bulk-receiving", 2152 .version_id = 1, 2153 .minimum_version_id = 1, 2154 .fields = (VMStateField[]) { 2155 VMSTATE_UINT8(bulk_receiving_started, struct endp_data), 2156 VMSTATE_END_OF_LIST() 2157 } 2158 }; 2159 2160 static bool usbredir_bulk_receiving_needed(void *priv) 2161 { 2162 struct endp_data *endp = priv; 2163 2164 return endp->bulk_receiving_started; 2165 } 2166 2167 static const VMStateDescription usbredir_ep_vmstate = { 2168 .name = "usb-redir-ep", 2169 .version_id = 1, 2170 .minimum_version_id = 1, 2171 .fields = (VMStateField[]) { 2172 VMSTATE_UINT8(type, struct endp_data), 2173 VMSTATE_UINT8(interval, struct endp_data), 2174 VMSTATE_UINT8(interface, struct endp_data), 2175 VMSTATE_UINT16(max_packet_size, struct endp_data), 2176 VMSTATE_UINT8(iso_started, struct endp_data), 2177 VMSTATE_UINT8(iso_error, struct endp_data), 2178 VMSTATE_UINT8(interrupt_started, struct endp_data), 2179 VMSTATE_UINT8(interrupt_error, struct endp_data), 2180 VMSTATE_UINT8(bufpq_prefilled, struct endp_data), 2181 VMSTATE_UINT8(bufpq_dropping_packets, struct endp_data), 2182 { 2183 .name = "bufpq", 2184 .version_id = 0, 2185 .field_exists = NULL, 2186 .size = 0, 2187 .info = &usbredir_ep_bufpq_vmstate_info, 2188 .flags = VMS_SINGLE, 2189 .offset = 0, 2190 }, 2191 VMSTATE_INT32(bufpq_target_size, struct endp_data), 2192 VMSTATE_END_OF_LIST() 2193 }, 2194 .subsections = (VMStateSubsection[]) { 2195 { 2196 .vmsd = &usbredir_bulk_receiving_vmstate, 2197 .needed = usbredir_bulk_receiving_needed, 2198 }, { 2199 /* empty */ 2200 } 2201 } 2202 }; 2203 2204 2205 /* For PacketIdQueue migration */ 2206 static void usbredir_put_packet_id_q(QEMUFile *f, void *priv, size_t unused) 2207 { 2208 struct PacketIdQueue *q = priv; 2209 USBRedirDevice *dev = q->dev; 2210 struct PacketIdQueueEntry *e; 2211 int remain = q->size; 2212 2213 DPRINTF("put_packet_id_q %s size %d\n", q->name, q->size); 2214 qemu_put_be32(f, q->size); 2215 QTAILQ_FOREACH(e, &q->head, next) { 2216 qemu_put_be64(f, e->id); 2217 remain--; 2218 } 2219 assert(remain == 0); 2220 } 2221 2222 static int usbredir_get_packet_id_q(QEMUFile *f, void *priv, size_t unused) 2223 { 2224 struct PacketIdQueue *q = priv; 2225 USBRedirDevice *dev = q->dev; 2226 int i, size; 2227 uint64_t id; 2228 2229 size = qemu_get_be32(f); 2230 DPRINTF("get_packet_id_q %s size %d\n", q->name, size); 2231 for (i = 0; i < size; i++) { 2232 id = qemu_get_be64(f); 2233 packet_id_queue_add(q, id); 2234 } 2235 assert(q->size == size); 2236 return 0; 2237 } 2238 2239 static const VMStateInfo usbredir_ep_packet_id_q_vmstate_info = { 2240 .name = "usb-redir-packet-id-q", 2241 .put = usbredir_put_packet_id_q, 2242 .get = usbredir_get_packet_id_q, 2243 }; 2244 2245 static const VMStateDescription usbredir_ep_packet_id_queue_vmstate = { 2246 .name = "usb-redir-packet-id-queue", 2247 .version_id = 1, 2248 .minimum_version_id = 1, 2249 .fields = (VMStateField[]) { 2250 { 2251 .name = "queue", 2252 .version_id = 0, 2253 .field_exists = NULL, 2254 .size = 0, 2255 .info = &usbredir_ep_packet_id_q_vmstate_info, 2256 .flags = VMS_SINGLE, 2257 .offset = 0, 2258 }, 2259 VMSTATE_END_OF_LIST() 2260 } 2261 }; 2262 2263 2264 /* For usb_redir_device_connect_header migration */ 2265 static const VMStateDescription usbredir_device_info_vmstate = { 2266 .name = "usb-redir-device-info", 2267 .version_id = 1, 2268 .minimum_version_id = 1, 2269 .fields = (VMStateField[]) { 2270 VMSTATE_UINT8(speed, struct usb_redir_device_connect_header), 2271 VMSTATE_UINT8(device_class, struct usb_redir_device_connect_header), 2272 VMSTATE_UINT8(device_subclass, struct usb_redir_device_connect_header), 2273 VMSTATE_UINT8(device_protocol, struct usb_redir_device_connect_header), 2274 VMSTATE_UINT16(vendor_id, struct usb_redir_device_connect_header), 2275 VMSTATE_UINT16(product_id, struct usb_redir_device_connect_header), 2276 VMSTATE_UINT16(device_version_bcd, 2277 struct usb_redir_device_connect_header), 2278 VMSTATE_END_OF_LIST() 2279 } 2280 }; 2281 2282 2283 /* For usb_redir_interface_info_header migration */ 2284 static const VMStateDescription usbredir_interface_info_vmstate = { 2285 .name = "usb-redir-interface-info", 2286 .version_id = 1, 2287 .minimum_version_id = 1, 2288 .fields = (VMStateField[]) { 2289 VMSTATE_UINT32(interface_count, 2290 struct usb_redir_interface_info_header), 2291 VMSTATE_UINT8_ARRAY(interface, 2292 struct usb_redir_interface_info_header, 32), 2293 VMSTATE_UINT8_ARRAY(interface_class, 2294 struct usb_redir_interface_info_header, 32), 2295 VMSTATE_UINT8_ARRAY(interface_subclass, 2296 struct usb_redir_interface_info_header, 32), 2297 VMSTATE_UINT8_ARRAY(interface_protocol, 2298 struct usb_redir_interface_info_header, 32), 2299 VMSTATE_END_OF_LIST() 2300 } 2301 }; 2302 2303 2304 /* And finally the USBRedirDevice vmstate itself */ 2305 static const VMStateDescription usbredir_vmstate = { 2306 .name = "usb-redir", 2307 .version_id = 1, 2308 .minimum_version_id = 1, 2309 .pre_save = usbredir_pre_save, 2310 .post_load = usbredir_post_load, 2311 .fields = (VMStateField[]) { 2312 VMSTATE_USB_DEVICE(dev, USBRedirDevice), 2313 VMSTATE_TIMER(attach_timer, USBRedirDevice), 2314 { 2315 .name = "parser", 2316 .version_id = 0, 2317 .field_exists = NULL, 2318 .size = 0, 2319 .info = &usbredir_parser_vmstate_info, 2320 .flags = VMS_SINGLE, 2321 .offset = 0, 2322 }, 2323 VMSTATE_STRUCT_ARRAY(endpoint, USBRedirDevice, MAX_ENDPOINTS, 1, 2324 usbredir_ep_vmstate, struct endp_data), 2325 VMSTATE_STRUCT(cancelled, USBRedirDevice, 1, 2326 usbredir_ep_packet_id_queue_vmstate, 2327 struct PacketIdQueue), 2328 VMSTATE_STRUCT(already_in_flight, USBRedirDevice, 1, 2329 usbredir_ep_packet_id_queue_vmstate, 2330 struct PacketIdQueue), 2331 VMSTATE_STRUCT(device_info, USBRedirDevice, 1, 2332 usbredir_device_info_vmstate, 2333 struct usb_redir_device_connect_header), 2334 VMSTATE_STRUCT(interface_info, USBRedirDevice, 1, 2335 usbredir_interface_info_vmstate, 2336 struct usb_redir_interface_info_header), 2337 VMSTATE_END_OF_LIST() 2338 } 2339 }; 2340 2341 static Property usbredir_properties[] = { 2342 DEFINE_PROP_CHR("chardev", USBRedirDevice, cs), 2343 DEFINE_PROP_UINT8("debug", USBRedirDevice, debug, usbredirparser_warning), 2344 DEFINE_PROP_STRING("filter", USBRedirDevice, filter_str), 2345 DEFINE_PROP_INT32("bootindex", USBRedirDevice, bootindex, -1), 2346 DEFINE_PROP_END_OF_LIST(), 2347 }; 2348 2349 static void usbredir_class_initfn(ObjectClass *klass, void *data) 2350 { 2351 USBDeviceClass *uc = USB_DEVICE_CLASS(klass); 2352 DeviceClass *dc = DEVICE_CLASS(klass); 2353 2354 uc->init = usbredir_initfn; 2355 uc->product_desc = "USB Redirection Device"; 2356 uc->handle_destroy = usbredir_handle_destroy; 2357 uc->cancel_packet = usbredir_cancel_packet; 2358 uc->handle_reset = usbredir_handle_reset; 2359 uc->handle_data = usbredir_handle_data; 2360 uc->handle_control = usbredir_handle_control; 2361 uc->flush_ep_queue = usbredir_flush_ep_queue; 2362 uc->ep_stopped = usbredir_ep_stopped; 2363 dc->vmsd = &usbredir_vmstate; 2364 dc->props = usbredir_properties; 2365 } 2366 2367 static const TypeInfo usbredir_dev_info = { 2368 .name = "usb-redir", 2369 .parent = TYPE_USB_DEVICE, 2370 .instance_size = sizeof(USBRedirDevice), 2371 .class_init = usbredir_class_initfn, 2372 }; 2373 2374 static void usbredir_register_types(void) 2375 { 2376 type_register_static(&usbredir_dev_info); 2377 } 2378 2379 type_init(usbredir_register_types) 2380