1 /* 2 * USB redirector usb-guest 3 * 4 * Copyright (c) 2011-2012 Red Hat, Inc. 5 * 6 * Red Hat Authors: 7 * Hans de Goede <hdegoede@redhat.com> 8 * 9 * Permission is hereby granted, free of charge, to any person obtaining a copy 10 * of this software and associated documentation files (the "Software"), to deal 11 * in the Software without restriction, including without limitation the rights 12 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 13 * copies of the Software, and to permit persons to whom the Software is 14 * furnished to do so, subject to the following conditions: 15 * 16 * The above copyright notice and this permission notice shall be included in 17 * all copies or substantial portions of the Software. 18 * 19 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 20 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 21 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 22 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 23 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 24 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 25 * THE SOFTWARE. 26 */ 27 28 #include "qemu/osdep.h" 29 #include "qapi/error.h" 30 #include "qemu-common.h" 31 #include "qemu/timer.h" 32 #include "sysemu/sysemu.h" 33 #include "qapi/qmp/qerror.h" 34 #include "qemu/error-report.h" 35 #include "qemu/iov.h" 36 #include "sysemu/char.h" 37 38 #include <usbredirparser.h> 39 #include <usbredirfilter.h> 40 41 #include "hw/usb.h" 42 43 /* ERROR is defined below. Remove any previous definition. */ 44 #undef ERROR 45 46 #define MAX_ENDPOINTS 32 47 #define NO_INTERFACE_INFO 255 /* Valid interface_count always <= 32 */ 48 #define EP2I(ep_address) (((ep_address & 0x80) >> 3) | (ep_address & 0x0f)) 49 #define I2EP(i) (((i & 0x10) << 3) | (i & 0x0f)) 50 #define USBEP2I(usb_ep) (((usb_ep)->pid == USB_TOKEN_IN) ? \ 51 ((usb_ep)->nr | 0x10) : ((usb_ep)->nr)) 52 #define I2USBEP(d, i) (usb_ep_get(&(d)->dev, \ 53 ((i) & 0x10) ? USB_TOKEN_IN : USB_TOKEN_OUT, \ 54 (i) & 0x0f)) 55 56 #ifndef USBREDIR_VERSION /* This is not defined in older usbredir versions */ 57 #define USBREDIR_VERSION 0 58 #endif 59 60 typedef struct USBRedirDevice USBRedirDevice; 61 62 /* Struct to hold buffered packets */ 63 struct buf_packet { 64 uint8_t *data; 65 void *free_on_destroy; 66 uint16_t len; 67 uint16_t offset; 68 uint8_t status; 69 QTAILQ_ENTRY(buf_packet)next; 70 }; 71 72 struct endp_data { 73 USBRedirDevice *dev; 74 uint8_t type; 75 uint8_t interval; 76 uint8_t interface; /* bInterfaceNumber this ep belongs to */ 77 uint16_t max_packet_size; /* In bytes, not wMaxPacketSize format !! */ 78 uint32_t max_streams; 79 uint8_t iso_started; 80 uint8_t iso_error; /* For reporting iso errors to the HC */ 81 uint8_t interrupt_started; 82 uint8_t interrupt_error; 83 uint8_t bulk_receiving_enabled; 84 uint8_t bulk_receiving_started; 85 uint8_t bufpq_prefilled; 86 uint8_t bufpq_dropping_packets; 87 QTAILQ_HEAD(, buf_packet) bufpq; 88 int32_t bufpq_size; 89 int32_t bufpq_target_size; 90 USBPacket *pending_async_packet; 91 }; 92 93 struct PacketIdQueueEntry { 94 uint64_t id; 95 QTAILQ_ENTRY(PacketIdQueueEntry)next; 96 }; 97 98 struct PacketIdQueue { 99 USBRedirDevice *dev; 100 const char *name; 101 QTAILQ_HEAD(, PacketIdQueueEntry) head; 102 int size; 103 }; 104 105 struct USBRedirDevice { 106 USBDevice dev; 107 /* Properties */ 108 CharBackend cs; 109 uint8_t debug; 110 char *filter_str; 111 int32_t bootindex; 112 bool enable_streams; 113 /* Data passed from chardev the fd_read cb to the usbredirparser read cb */ 114 const uint8_t *read_buf; 115 int read_buf_size; 116 /* Active chardev-watch-tag */ 117 guint watch; 118 /* For async handling of close / reject */ 119 QEMUBH *chardev_close_bh; 120 QEMUBH *device_reject_bh; 121 /* To delay the usb attach in case of quick chardev close + open */ 122 QEMUTimer *attach_timer; 123 int64_t next_attach_time; 124 struct usbredirparser *parser; 125 struct endp_data endpoint[MAX_ENDPOINTS]; 126 struct PacketIdQueue cancelled; 127 struct PacketIdQueue already_in_flight; 128 void (*buffered_bulk_in_complete)(USBRedirDevice *, USBPacket *, uint8_t); 129 /* Data for device filtering */ 130 struct usb_redir_device_connect_header device_info; 131 struct usb_redir_interface_info_header interface_info; 132 struct usbredirfilter_rule *filter_rules; 133 int filter_rules_count; 134 int compatible_speedmask; 135 VMChangeStateEntry *vmstate; 136 }; 137 138 #define TYPE_USB_REDIR "usb-redir" 139 #define USB_REDIRECT(obj) OBJECT_CHECK(USBRedirDevice, (obj), TYPE_USB_REDIR) 140 141 static void usbredir_hello(void *priv, struct usb_redir_hello_header *h); 142 static void usbredir_device_connect(void *priv, 143 struct usb_redir_device_connect_header *device_connect); 144 static void usbredir_device_disconnect(void *priv); 145 static void usbredir_interface_info(void *priv, 146 struct usb_redir_interface_info_header *interface_info); 147 static void usbredir_ep_info(void *priv, 148 struct usb_redir_ep_info_header *ep_info); 149 static void usbredir_configuration_status(void *priv, uint64_t id, 150 struct usb_redir_configuration_status_header *configuration_status); 151 static void usbredir_alt_setting_status(void *priv, uint64_t id, 152 struct usb_redir_alt_setting_status_header *alt_setting_status); 153 static void usbredir_iso_stream_status(void *priv, uint64_t id, 154 struct usb_redir_iso_stream_status_header *iso_stream_status); 155 static void usbredir_interrupt_receiving_status(void *priv, uint64_t id, 156 struct usb_redir_interrupt_receiving_status_header 157 *interrupt_receiving_status); 158 static void usbredir_bulk_streams_status(void *priv, uint64_t id, 159 struct usb_redir_bulk_streams_status_header *bulk_streams_status); 160 static void usbredir_bulk_receiving_status(void *priv, uint64_t id, 161 struct usb_redir_bulk_receiving_status_header *bulk_receiving_status); 162 static void usbredir_control_packet(void *priv, uint64_t id, 163 struct usb_redir_control_packet_header *control_packet, 164 uint8_t *data, int data_len); 165 static void usbredir_bulk_packet(void *priv, uint64_t id, 166 struct usb_redir_bulk_packet_header *bulk_packet, 167 uint8_t *data, int data_len); 168 static void usbredir_iso_packet(void *priv, uint64_t id, 169 struct usb_redir_iso_packet_header *iso_packet, 170 uint8_t *data, int data_len); 171 static void usbredir_interrupt_packet(void *priv, uint64_t id, 172 struct usb_redir_interrupt_packet_header *interrupt_header, 173 uint8_t *data, int data_len); 174 static void usbredir_buffered_bulk_packet(void *priv, uint64_t id, 175 struct usb_redir_buffered_bulk_packet_header *buffered_bulk_packet, 176 uint8_t *data, int data_len); 177 178 static void usbredir_handle_status(USBRedirDevice *dev, USBPacket *p, 179 int status); 180 181 #define VERSION "qemu usb-redir guest " QEMU_VERSION 182 183 /* 184 * Logging stuff 185 */ 186 187 #define ERROR(...) \ 188 do { \ 189 if (dev->debug >= usbredirparser_error) { \ 190 error_report("usb-redir error: " __VA_ARGS__); \ 191 } \ 192 } while (0) 193 #define WARNING(...) \ 194 do { \ 195 if (dev->debug >= usbredirparser_warning) { \ 196 error_report("usb-redir warning: " __VA_ARGS__); \ 197 } \ 198 } while (0) 199 #define INFO(...) \ 200 do { \ 201 if (dev->debug >= usbredirparser_info) { \ 202 error_report("usb-redir: " __VA_ARGS__); \ 203 } \ 204 } while (0) 205 #define DPRINTF(...) \ 206 do { \ 207 if (dev->debug >= usbredirparser_debug) { \ 208 error_report("usb-redir: " __VA_ARGS__); \ 209 } \ 210 } while (0) 211 #define DPRINTF2(...) \ 212 do { \ 213 if (dev->debug >= usbredirparser_debug_data) { \ 214 error_report("usb-redir: " __VA_ARGS__); \ 215 } \ 216 } while (0) 217 218 static void usbredir_log(void *priv, int level, const char *msg) 219 { 220 USBRedirDevice *dev = priv; 221 222 if (dev->debug < level) { 223 return; 224 } 225 226 error_report("%s", msg); 227 } 228 229 static void usbredir_log_data(USBRedirDevice *dev, const char *desc, 230 const uint8_t *data, int len) 231 { 232 int i, j, n; 233 234 if (dev->debug < usbredirparser_debug_data) { 235 return; 236 } 237 238 for (i = 0; i < len; i += j) { 239 char buf[128]; 240 241 n = sprintf(buf, "%s", desc); 242 for (j = 0; j < 8 && i + j < len; j++) { 243 n += sprintf(buf + n, " %02X", data[i + j]); 244 } 245 error_report("%s", buf); 246 } 247 } 248 249 /* 250 * usbredirparser io functions 251 */ 252 253 static int usbredir_read(void *priv, uint8_t *data, int count) 254 { 255 USBRedirDevice *dev = priv; 256 257 if (dev->read_buf_size < count) { 258 count = dev->read_buf_size; 259 } 260 261 memcpy(data, dev->read_buf, count); 262 263 dev->read_buf_size -= count; 264 if (dev->read_buf_size) { 265 dev->read_buf += count; 266 } else { 267 dev->read_buf = NULL; 268 } 269 270 return count; 271 } 272 273 static gboolean usbredir_write_unblocked(GIOChannel *chan, GIOCondition cond, 274 void *opaque) 275 { 276 USBRedirDevice *dev = opaque; 277 278 dev->watch = 0; 279 usbredirparser_do_write(dev->parser); 280 281 return FALSE; 282 } 283 284 static int usbredir_write(void *priv, uint8_t *data, int count) 285 { 286 USBRedirDevice *dev = priv; 287 Chardev *chr = qemu_chr_fe_get_driver(&dev->cs); 288 int r; 289 290 if (!chr->be_open) { 291 return 0; 292 } 293 294 /* Don't send new data to the chardev until our state is fully synced */ 295 if (!runstate_check(RUN_STATE_RUNNING)) { 296 return 0; 297 } 298 299 r = qemu_chr_fe_write(&dev->cs, data, count); 300 if (r < count) { 301 if (!dev->watch) { 302 dev->watch = qemu_chr_fe_add_watch(&dev->cs, G_IO_OUT | G_IO_HUP, 303 usbredir_write_unblocked, dev); 304 } 305 if (r < 0) { 306 r = 0; 307 } 308 } 309 return r; 310 } 311 312 /* 313 * Cancelled and buffered packets helpers 314 */ 315 316 static void packet_id_queue_init(struct PacketIdQueue *q, 317 USBRedirDevice *dev, const char *name) 318 { 319 q->dev = dev; 320 q->name = name; 321 QTAILQ_INIT(&q->head); 322 q->size = 0; 323 } 324 325 static void packet_id_queue_add(struct PacketIdQueue *q, uint64_t id) 326 { 327 USBRedirDevice *dev = q->dev; 328 struct PacketIdQueueEntry *e; 329 330 DPRINTF("adding packet id %"PRIu64" to %s queue\n", id, q->name); 331 332 e = g_new0(struct PacketIdQueueEntry, 1); 333 e->id = id; 334 QTAILQ_INSERT_TAIL(&q->head, e, next); 335 q->size++; 336 } 337 338 static int packet_id_queue_remove(struct PacketIdQueue *q, uint64_t id) 339 { 340 USBRedirDevice *dev = q->dev; 341 struct PacketIdQueueEntry *e; 342 343 QTAILQ_FOREACH(e, &q->head, next) { 344 if (e->id == id) { 345 DPRINTF("removing packet id %"PRIu64" from %s queue\n", 346 id, q->name); 347 QTAILQ_REMOVE(&q->head, e, next); 348 q->size--; 349 g_free(e); 350 return 1; 351 } 352 } 353 return 0; 354 } 355 356 static void packet_id_queue_empty(struct PacketIdQueue *q) 357 { 358 USBRedirDevice *dev = q->dev; 359 struct PacketIdQueueEntry *e, *next_e; 360 361 DPRINTF("removing %d packet-ids from %s queue\n", q->size, q->name); 362 363 QTAILQ_FOREACH_SAFE(e, &q->head, next, next_e) { 364 QTAILQ_REMOVE(&q->head, e, next); 365 g_free(e); 366 } 367 q->size = 0; 368 } 369 370 static void usbredir_cancel_packet(USBDevice *udev, USBPacket *p) 371 { 372 USBRedirDevice *dev = USB_REDIRECT(udev); 373 int i = USBEP2I(p->ep); 374 375 if (p->combined) { 376 usb_combined_packet_cancel(udev, p); 377 return; 378 } 379 380 if (dev->endpoint[i].pending_async_packet) { 381 assert(dev->endpoint[i].pending_async_packet == p); 382 dev->endpoint[i].pending_async_packet = NULL; 383 return; 384 } 385 386 packet_id_queue_add(&dev->cancelled, p->id); 387 usbredirparser_send_cancel_data_packet(dev->parser, p->id); 388 usbredirparser_do_write(dev->parser); 389 } 390 391 static int usbredir_is_cancelled(USBRedirDevice *dev, uint64_t id) 392 { 393 if (!dev->dev.attached) { 394 return 1; /* Treat everything as cancelled after a disconnect */ 395 } 396 return packet_id_queue_remove(&dev->cancelled, id); 397 } 398 399 static void usbredir_fill_already_in_flight_from_ep(USBRedirDevice *dev, 400 struct USBEndpoint *ep) 401 { 402 static USBPacket *p; 403 404 /* async handled packets for bulk receiving eps do not count as inflight */ 405 if (dev->endpoint[USBEP2I(ep)].bulk_receiving_started) { 406 return; 407 } 408 409 QTAILQ_FOREACH(p, &ep->queue, queue) { 410 /* Skip combined packets, except for the first */ 411 if (p->combined && p != p->combined->first) { 412 continue; 413 } 414 if (p->state == USB_PACKET_ASYNC) { 415 packet_id_queue_add(&dev->already_in_flight, p->id); 416 } 417 } 418 } 419 420 static void usbredir_fill_already_in_flight(USBRedirDevice *dev) 421 { 422 int ep; 423 struct USBDevice *udev = &dev->dev; 424 425 usbredir_fill_already_in_flight_from_ep(dev, &udev->ep_ctl); 426 427 for (ep = 0; ep < USB_MAX_ENDPOINTS; ep++) { 428 usbredir_fill_already_in_flight_from_ep(dev, &udev->ep_in[ep]); 429 usbredir_fill_already_in_flight_from_ep(dev, &udev->ep_out[ep]); 430 } 431 } 432 433 static int usbredir_already_in_flight(USBRedirDevice *dev, uint64_t id) 434 { 435 return packet_id_queue_remove(&dev->already_in_flight, id); 436 } 437 438 static USBPacket *usbredir_find_packet_by_id(USBRedirDevice *dev, 439 uint8_t ep, uint64_t id) 440 { 441 USBPacket *p; 442 443 if (usbredir_is_cancelled(dev, id)) { 444 return NULL; 445 } 446 447 p = usb_ep_find_packet_by_id(&dev->dev, 448 (ep & USB_DIR_IN) ? USB_TOKEN_IN : USB_TOKEN_OUT, 449 ep & 0x0f, id); 450 if (p == NULL) { 451 ERROR("could not find packet with id %"PRIu64"\n", id); 452 } 453 return p; 454 } 455 456 static int bufp_alloc(USBRedirDevice *dev, uint8_t *data, uint16_t len, 457 uint8_t status, uint8_t ep, void *free_on_destroy) 458 { 459 struct buf_packet *bufp; 460 461 if (!dev->endpoint[EP2I(ep)].bufpq_dropping_packets && 462 dev->endpoint[EP2I(ep)].bufpq_size > 463 2 * dev->endpoint[EP2I(ep)].bufpq_target_size) { 464 DPRINTF("bufpq overflow, dropping packets ep %02X\n", ep); 465 dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 1; 466 } 467 /* Since we're interupting the stream anyways, drop enough packets to get 468 back to our target buffer size */ 469 if (dev->endpoint[EP2I(ep)].bufpq_dropping_packets) { 470 if (dev->endpoint[EP2I(ep)].bufpq_size > 471 dev->endpoint[EP2I(ep)].bufpq_target_size) { 472 free(data); 473 return -1; 474 } 475 dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0; 476 } 477 478 bufp = g_new(struct buf_packet, 1); 479 bufp->data = data; 480 bufp->len = len; 481 bufp->offset = 0; 482 bufp->status = status; 483 bufp->free_on_destroy = free_on_destroy; 484 QTAILQ_INSERT_TAIL(&dev->endpoint[EP2I(ep)].bufpq, bufp, next); 485 dev->endpoint[EP2I(ep)].bufpq_size++; 486 return 0; 487 } 488 489 static void bufp_free(USBRedirDevice *dev, struct buf_packet *bufp, 490 uint8_t ep) 491 { 492 QTAILQ_REMOVE(&dev->endpoint[EP2I(ep)].bufpq, bufp, next); 493 dev->endpoint[EP2I(ep)].bufpq_size--; 494 free(bufp->free_on_destroy); 495 g_free(bufp); 496 } 497 498 static void usbredir_free_bufpq(USBRedirDevice *dev, uint8_t ep) 499 { 500 struct buf_packet *buf, *buf_next; 501 502 QTAILQ_FOREACH_SAFE(buf, &dev->endpoint[EP2I(ep)].bufpq, next, buf_next) { 503 bufp_free(dev, buf, ep); 504 } 505 } 506 507 /* 508 * USBDevice callbacks 509 */ 510 511 static void usbredir_handle_reset(USBDevice *udev) 512 { 513 USBRedirDevice *dev = USB_REDIRECT(udev); 514 515 DPRINTF("reset device\n"); 516 usbredirparser_send_reset(dev->parser); 517 usbredirparser_do_write(dev->parser); 518 } 519 520 static void usbredir_handle_iso_data(USBRedirDevice *dev, USBPacket *p, 521 uint8_t ep) 522 { 523 int status, len; 524 if (!dev->endpoint[EP2I(ep)].iso_started && 525 !dev->endpoint[EP2I(ep)].iso_error) { 526 struct usb_redir_start_iso_stream_header start_iso = { 527 .endpoint = ep, 528 }; 529 int pkts_per_sec; 530 531 if (dev->dev.speed == USB_SPEED_HIGH) { 532 pkts_per_sec = 8000 / dev->endpoint[EP2I(ep)].interval; 533 } else { 534 pkts_per_sec = 1000 / dev->endpoint[EP2I(ep)].interval; 535 } 536 /* Testing has shown that we need circa 60 ms buffer */ 537 dev->endpoint[EP2I(ep)].bufpq_target_size = (pkts_per_sec * 60) / 1000; 538 539 /* Aim for approx 100 interrupts / second on the client to 540 balance latency and interrupt load */ 541 start_iso.pkts_per_urb = pkts_per_sec / 100; 542 if (start_iso.pkts_per_urb < 1) { 543 start_iso.pkts_per_urb = 1; 544 } else if (start_iso.pkts_per_urb > 32) { 545 start_iso.pkts_per_urb = 32; 546 } 547 548 start_iso.no_urbs = DIV_ROUND_UP( 549 dev->endpoint[EP2I(ep)].bufpq_target_size, 550 start_iso.pkts_per_urb); 551 /* Output endpoints pre-fill only 1/2 of the packets, keeping the rest 552 as overflow buffer. Also see the usbredir protocol documentation */ 553 if (!(ep & USB_DIR_IN)) { 554 start_iso.no_urbs *= 2; 555 } 556 if (start_iso.no_urbs > 16) { 557 start_iso.no_urbs = 16; 558 } 559 560 /* No id, we look at the ep when receiving a status back */ 561 usbredirparser_send_start_iso_stream(dev->parser, 0, &start_iso); 562 usbredirparser_do_write(dev->parser); 563 DPRINTF("iso stream started pkts/sec %d pkts/urb %d urbs %d ep %02X\n", 564 pkts_per_sec, start_iso.pkts_per_urb, start_iso.no_urbs, ep); 565 dev->endpoint[EP2I(ep)].iso_started = 1; 566 dev->endpoint[EP2I(ep)].bufpq_prefilled = 0; 567 dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0; 568 } 569 570 if (ep & USB_DIR_IN) { 571 struct buf_packet *isop; 572 573 if (dev->endpoint[EP2I(ep)].iso_started && 574 !dev->endpoint[EP2I(ep)].bufpq_prefilled) { 575 if (dev->endpoint[EP2I(ep)].bufpq_size < 576 dev->endpoint[EP2I(ep)].bufpq_target_size) { 577 return; 578 } 579 dev->endpoint[EP2I(ep)].bufpq_prefilled = 1; 580 } 581 582 isop = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq); 583 if (isop == NULL) { 584 DPRINTF("iso-token-in ep %02X, no isop, iso_error: %d\n", 585 ep, dev->endpoint[EP2I(ep)].iso_error); 586 /* Re-fill the buffer */ 587 dev->endpoint[EP2I(ep)].bufpq_prefilled = 0; 588 /* Check iso_error for stream errors, otherwise its an underrun */ 589 status = dev->endpoint[EP2I(ep)].iso_error; 590 dev->endpoint[EP2I(ep)].iso_error = 0; 591 p->status = status ? USB_RET_IOERROR : USB_RET_SUCCESS; 592 return; 593 } 594 DPRINTF2("iso-token-in ep %02X status %d len %d queue-size: %d\n", ep, 595 isop->status, isop->len, dev->endpoint[EP2I(ep)].bufpq_size); 596 597 status = isop->status; 598 len = isop->len; 599 if (len > p->iov.size) { 600 ERROR("received iso data is larger then packet ep %02X (%d > %d)\n", 601 ep, len, (int)p->iov.size); 602 len = p->iov.size; 603 status = usb_redir_babble; 604 } 605 usb_packet_copy(p, isop->data, len); 606 bufp_free(dev, isop, ep); 607 usbredir_handle_status(dev, p, status); 608 } else { 609 /* If the stream was not started because of a pending error don't 610 send the packet to the usb-host */ 611 if (dev->endpoint[EP2I(ep)].iso_started) { 612 struct usb_redir_iso_packet_header iso_packet = { 613 .endpoint = ep, 614 .length = p->iov.size 615 }; 616 uint8_t buf[p->iov.size]; 617 /* No id, we look at the ep when receiving a status back */ 618 usb_packet_copy(p, buf, p->iov.size); 619 usbredirparser_send_iso_packet(dev->parser, 0, &iso_packet, 620 buf, p->iov.size); 621 usbredirparser_do_write(dev->parser); 622 } 623 status = dev->endpoint[EP2I(ep)].iso_error; 624 dev->endpoint[EP2I(ep)].iso_error = 0; 625 DPRINTF2("iso-token-out ep %02X status %d len %zd\n", ep, status, 626 p->iov.size); 627 usbredir_handle_status(dev, p, status); 628 } 629 } 630 631 static void usbredir_stop_iso_stream(USBRedirDevice *dev, uint8_t ep) 632 { 633 struct usb_redir_stop_iso_stream_header stop_iso_stream = { 634 .endpoint = ep 635 }; 636 if (dev->endpoint[EP2I(ep)].iso_started) { 637 usbredirparser_send_stop_iso_stream(dev->parser, 0, &stop_iso_stream); 638 DPRINTF("iso stream stopped ep %02X\n", ep); 639 dev->endpoint[EP2I(ep)].iso_started = 0; 640 } 641 dev->endpoint[EP2I(ep)].iso_error = 0; 642 usbredir_free_bufpq(dev, ep); 643 } 644 645 /* 646 * The usb-host may poll the endpoint faster then our guest, resulting in lots 647 * of smaller bulkp-s. The below buffered_bulk_in_complete* functions combine 648 * data from multiple bulkp-s into a single packet, avoiding bufpq overflows. 649 */ 650 static void usbredir_buffered_bulk_add_data_to_packet(USBRedirDevice *dev, 651 struct buf_packet *bulkp, int count, USBPacket *p, uint8_t ep) 652 { 653 usb_packet_copy(p, bulkp->data + bulkp->offset, count); 654 bulkp->offset += count; 655 if (bulkp->offset == bulkp->len) { 656 /* Store status in the last packet with data from this bulkp */ 657 usbredir_handle_status(dev, p, bulkp->status); 658 bufp_free(dev, bulkp, ep); 659 } 660 } 661 662 static void usbredir_buffered_bulk_in_complete_raw(USBRedirDevice *dev, 663 USBPacket *p, uint8_t ep) 664 { 665 struct buf_packet *bulkp; 666 int count; 667 668 while ((bulkp = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq)) && 669 p->actual_length < p->iov.size && p->status == USB_RET_SUCCESS) { 670 count = bulkp->len - bulkp->offset; 671 if (count > (p->iov.size - p->actual_length)) { 672 count = p->iov.size - p->actual_length; 673 } 674 usbredir_buffered_bulk_add_data_to_packet(dev, bulkp, count, p, ep); 675 } 676 } 677 678 static void usbredir_buffered_bulk_in_complete_ftdi(USBRedirDevice *dev, 679 USBPacket *p, uint8_t ep) 680 { 681 const int maxp = dev->endpoint[EP2I(ep)].max_packet_size; 682 uint8_t header[2] = { 0, 0 }; 683 struct buf_packet *bulkp; 684 int count; 685 686 while ((bulkp = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq)) && 687 p->actual_length < p->iov.size && p->status == USB_RET_SUCCESS) { 688 if (bulkp->len < 2) { 689 WARNING("malformed ftdi bulk in packet\n"); 690 bufp_free(dev, bulkp, ep); 691 continue; 692 } 693 694 if ((p->actual_length % maxp) == 0) { 695 usb_packet_copy(p, bulkp->data, 2); 696 memcpy(header, bulkp->data, 2); 697 } else { 698 if (bulkp->data[0] != header[0] || bulkp->data[1] != header[1]) { 699 break; /* Different header, add to next packet */ 700 } 701 } 702 703 if (bulkp->offset == 0) { 704 bulkp->offset = 2; /* Skip header */ 705 } 706 count = bulkp->len - bulkp->offset; 707 /* Must repeat the header at maxp interval */ 708 if (count > (maxp - (p->actual_length % maxp))) { 709 count = maxp - (p->actual_length % maxp); 710 } 711 usbredir_buffered_bulk_add_data_to_packet(dev, bulkp, count, p, ep); 712 } 713 } 714 715 static void usbredir_buffered_bulk_in_complete(USBRedirDevice *dev, 716 USBPacket *p, uint8_t ep) 717 { 718 p->status = USB_RET_SUCCESS; /* Clear previous ASYNC status */ 719 dev->buffered_bulk_in_complete(dev, p, ep); 720 DPRINTF("bulk-token-in ep %02X status %d len %d id %"PRIu64"\n", 721 ep, p->status, p->actual_length, p->id); 722 } 723 724 static void usbredir_handle_buffered_bulk_in_data(USBRedirDevice *dev, 725 USBPacket *p, uint8_t ep) 726 { 727 /* Input bulk endpoint, buffered packet input */ 728 if (!dev->endpoint[EP2I(ep)].bulk_receiving_started) { 729 int bpt; 730 struct usb_redir_start_bulk_receiving_header start = { 731 .endpoint = ep, 732 .stream_id = 0, 733 .no_transfers = 5, 734 }; 735 /* Round bytes_per_transfer up to a multiple of max_packet_size */ 736 bpt = 512 + dev->endpoint[EP2I(ep)].max_packet_size - 1; 737 bpt /= dev->endpoint[EP2I(ep)].max_packet_size; 738 bpt *= dev->endpoint[EP2I(ep)].max_packet_size; 739 start.bytes_per_transfer = bpt; 740 /* No id, we look at the ep when receiving a status back */ 741 usbredirparser_send_start_bulk_receiving(dev->parser, 0, &start); 742 usbredirparser_do_write(dev->parser); 743 DPRINTF("bulk receiving started bytes/transfer %u count %d ep %02X\n", 744 start.bytes_per_transfer, start.no_transfers, ep); 745 dev->endpoint[EP2I(ep)].bulk_receiving_started = 1; 746 /* We don't really want to drop bulk packets ever, but 747 having some upper limit to how much we buffer is good. */ 748 dev->endpoint[EP2I(ep)].bufpq_target_size = 5000; 749 dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0; 750 } 751 752 if (QTAILQ_EMPTY(&dev->endpoint[EP2I(ep)].bufpq)) { 753 DPRINTF("bulk-token-in ep %02X, no bulkp\n", ep); 754 assert(dev->endpoint[EP2I(ep)].pending_async_packet == NULL); 755 dev->endpoint[EP2I(ep)].pending_async_packet = p; 756 p->status = USB_RET_ASYNC; 757 return; 758 } 759 usbredir_buffered_bulk_in_complete(dev, p, ep); 760 } 761 762 static void usbredir_stop_bulk_receiving(USBRedirDevice *dev, uint8_t ep) 763 { 764 struct usb_redir_stop_bulk_receiving_header stop_bulk = { 765 .endpoint = ep, 766 .stream_id = 0, 767 }; 768 if (dev->endpoint[EP2I(ep)].bulk_receiving_started) { 769 usbredirparser_send_stop_bulk_receiving(dev->parser, 0, &stop_bulk); 770 DPRINTF("bulk receiving stopped ep %02X\n", ep); 771 dev->endpoint[EP2I(ep)].bulk_receiving_started = 0; 772 } 773 usbredir_free_bufpq(dev, ep); 774 } 775 776 static void usbredir_handle_bulk_data(USBRedirDevice *dev, USBPacket *p, 777 uint8_t ep) 778 { 779 struct usb_redir_bulk_packet_header bulk_packet; 780 size_t size = usb_packet_size(p); 781 const int maxp = dev->endpoint[EP2I(ep)].max_packet_size; 782 783 if (usbredir_already_in_flight(dev, p->id)) { 784 p->status = USB_RET_ASYNC; 785 return; 786 } 787 788 if (dev->endpoint[EP2I(ep)].bulk_receiving_enabled) { 789 if (size != 0 && (size % maxp) == 0) { 790 usbredir_handle_buffered_bulk_in_data(dev, p, ep); 791 return; 792 } 793 WARNING("bulk recv invalid size %zd ep %02x, disabling\n", size, ep); 794 assert(dev->endpoint[EP2I(ep)].pending_async_packet == NULL); 795 usbredir_stop_bulk_receiving(dev, ep); 796 dev->endpoint[EP2I(ep)].bulk_receiving_enabled = 0; 797 } 798 799 DPRINTF("bulk-out ep %02X stream %u len %zd id %"PRIu64"\n", 800 ep, p->stream, size, p->id); 801 802 bulk_packet.endpoint = ep; 803 bulk_packet.length = size; 804 bulk_packet.stream_id = p->stream; 805 bulk_packet.length_high = size >> 16; 806 assert(bulk_packet.length_high == 0 || 807 usbredirparser_peer_has_cap(dev->parser, 808 usb_redir_cap_32bits_bulk_length)); 809 810 if (ep & USB_DIR_IN) { 811 usbredirparser_send_bulk_packet(dev->parser, p->id, 812 &bulk_packet, NULL, 0); 813 } else { 814 uint8_t buf[size]; 815 usb_packet_copy(p, buf, size); 816 usbredir_log_data(dev, "bulk data out:", buf, size); 817 usbredirparser_send_bulk_packet(dev->parser, p->id, 818 &bulk_packet, buf, size); 819 } 820 usbredirparser_do_write(dev->parser); 821 p->status = USB_RET_ASYNC; 822 } 823 824 static void usbredir_handle_interrupt_in_data(USBRedirDevice *dev, 825 USBPacket *p, uint8_t ep) 826 { 827 /* Input interrupt endpoint, buffered packet input */ 828 struct buf_packet *intp; 829 int status, len; 830 831 if (!dev->endpoint[EP2I(ep)].interrupt_started && 832 !dev->endpoint[EP2I(ep)].interrupt_error) { 833 struct usb_redir_start_interrupt_receiving_header start_int = { 834 .endpoint = ep, 835 }; 836 /* No id, we look at the ep when receiving a status back */ 837 usbredirparser_send_start_interrupt_receiving(dev->parser, 0, 838 &start_int); 839 usbredirparser_do_write(dev->parser); 840 DPRINTF("interrupt recv started ep %02X\n", ep); 841 dev->endpoint[EP2I(ep)].interrupt_started = 1; 842 /* We don't really want to drop interrupt packets ever, but 843 having some upper limit to how much we buffer is good. */ 844 dev->endpoint[EP2I(ep)].bufpq_target_size = 1000; 845 dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0; 846 } 847 848 intp = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq); 849 if (intp == NULL) { 850 DPRINTF2("interrupt-token-in ep %02X, no intp\n", ep); 851 /* Check interrupt_error for stream errors */ 852 status = dev->endpoint[EP2I(ep)].interrupt_error; 853 dev->endpoint[EP2I(ep)].interrupt_error = 0; 854 if (status) { 855 usbredir_handle_status(dev, p, status); 856 } else { 857 p->status = USB_RET_NAK; 858 } 859 return; 860 } 861 DPRINTF("interrupt-token-in ep %02X status %d len %d\n", ep, 862 intp->status, intp->len); 863 864 status = intp->status; 865 len = intp->len; 866 if (len > p->iov.size) { 867 ERROR("received int data is larger then packet ep %02X\n", ep); 868 len = p->iov.size; 869 status = usb_redir_babble; 870 } 871 usb_packet_copy(p, intp->data, len); 872 bufp_free(dev, intp, ep); 873 usbredir_handle_status(dev, p, status); 874 } 875 876 /* 877 * Handle interrupt out data, the usbredir protocol expects us to do this 878 * async, so that it can report back a completion status. But guests will 879 * expect immediate completion for an interrupt endpoint, and handling this 880 * async causes migration issues. So we report success directly, counting 881 * on the fact that output interrupt packets normally always succeed. 882 */ 883 static void usbredir_handle_interrupt_out_data(USBRedirDevice *dev, 884 USBPacket *p, uint8_t ep) 885 { 886 struct usb_redir_interrupt_packet_header interrupt_packet; 887 uint8_t buf[p->iov.size]; 888 889 DPRINTF("interrupt-out ep %02X len %zd id %"PRIu64"\n", ep, 890 p->iov.size, p->id); 891 892 interrupt_packet.endpoint = ep; 893 interrupt_packet.length = p->iov.size; 894 895 usb_packet_copy(p, buf, p->iov.size); 896 usbredir_log_data(dev, "interrupt data out:", buf, p->iov.size); 897 usbredirparser_send_interrupt_packet(dev->parser, p->id, 898 &interrupt_packet, buf, p->iov.size); 899 usbredirparser_do_write(dev->parser); 900 } 901 902 static void usbredir_stop_interrupt_receiving(USBRedirDevice *dev, 903 uint8_t ep) 904 { 905 struct usb_redir_stop_interrupt_receiving_header stop_interrupt_recv = { 906 .endpoint = ep 907 }; 908 if (dev->endpoint[EP2I(ep)].interrupt_started) { 909 usbredirparser_send_stop_interrupt_receiving(dev->parser, 0, 910 &stop_interrupt_recv); 911 DPRINTF("interrupt recv stopped ep %02X\n", ep); 912 dev->endpoint[EP2I(ep)].interrupt_started = 0; 913 } 914 dev->endpoint[EP2I(ep)].interrupt_error = 0; 915 usbredir_free_bufpq(dev, ep); 916 } 917 918 static void usbredir_handle_data(USBDevice *udev, USBPacket *p) 919 { 920 USBRedirDevice *dev = USB_REDIRECT(udev); 921 uint8_t ep; 922 923 ep = p->ep->nr; 924 if (p->pid == USB_TOKEN_IN) { 925 ep |= USB_DIR_IN; 926 } 927 928 switch (dev->endpoint[EP2I(ep)].type) { 929 case USB_ENDPOINT_XFER_CONTROL: 930 ERROR("handle_data called for control transfer on ep %02X\n", ep); 931 p->status = USB_RET_NAK; 932 break; 933 case USB_ENDPOINT_XFER_BULK: 934 if (p->state == USB_PACKET_SETUP && p->pid == USB_TOKEN_IN && 935 p->ep->pipeline) { 936 p->status = USB_RET_ADD_TO_QUEUE; 937 break; 938 } 939 usbredir_handle_bulk_data(dev, p, ep); 940 break; 941 case USB_ENDPOINT_XFER_ISOC: 942 usbredir_handle_iso_data(dev, p, ep); 943 break; 944 case USB_ENDPOINT_XFER_INT: 945 if (ep & USB_DIR_IN) { 946 usbredir_handle_interrupt_in_data(dev, p, ep); 947 } else { 948 usbredir_handle_interrupt_out_data(dev, p, ep); 949 } 950 break; 951 default: 952 ERROR("handle_data ep %02X has unknown type %d\n", ep, 953 dev->endpoint[EP2I(ep)].type); 954 p->status = USB_RET_NAK; 955 } 956 } 957 958 static void usbredir_flush_ep_queue(USBDevice *dev, USBEndpoint *ep) 959 { 960 if (ep->pid == USB_TOKEN_IN && ep->pipeline) { 961 usb_ep_combine_input_packets(ep); 962 } 963 } 964 965 static void usbredir_stop_ep(USBRedirDevice *dev, int i) 966 { 967 uint8_t ep = I2EP(i); 968 969 switch (dev->endpoint[i].type) { 970 case USB_ENDPOINT_XFER_BULK: 971 if (ep & USB_DIR_IN) { 972 usbredir_stop_bulk_receiving(dev, ep); 973 } 974 break; 975 case USB_ENDPOINT_XFER_ISOC: 976 usbredir_stop_iso_stream(dev, ep); 977 break; 978 case USB_ENDPOINT_XFER_INT: 979 if (ep & USB_DIR_IN) { 980 usbredir_stop_interrupt_receiving(dev, ep); 981 } 982 break; 983 } 984 usbredir_free_bufpq(dev, ep); 985 } 986 987 static void usbredir_ep_stopped(USBDevice *udev, USBEndpoint *uep) 988 { 989 USBRedirDevice *dev = USB_REDIRECT(udev); 990 991 usbredir_stop_ep(dev, USBEP2I(uep)); 992 usbredirparser_do_write(dev->parser); 993 } 994 995 static void usbredir_set_config(USBRedirDevice *dev, USBPacket *p, 996 int config) 997 { 998 struct usb_redir_set_configuration_header set_config; 999 int i; 1000 1001 DPRINTF("set config %d id %"PRIu64"\n", config, p->id); 1002 1003 for (i = 0; i < MAX_ENDPOINTS; i++) { 1004 usbredir_stop_ep(dev, i); 1005 } 1006 1007 set_config.configuration = config; 1008 usbredirparser_send_set_configuration(dev->parser, p->id, &set_config); 1009 usbredirparser_do_write(dev->parser); 1010 p->status = USB_RET_ASYNC; 1011 } 1012 1013 static void usbredir_get_config(USBRedirDevice *dev, USBPacket *p) 1014 { 1015 DPRINTF("get config id %"PRIu64"\n", p->id); 1016 1017 usbredirparser_send_get_configuration(dev->parser, p->id); 1018 usbredirparser_do_write(dev->parser); 1019 p->status = USB_RET_ASYNC; 1020 } 1021 1022 static void usbredir_set_interface(USBRedirDevice *dev, USBPacket *p, 1023 int interface, int alt) 1024 { 1025 struct usb_redir_set_alt_setting_header set_alt; 1026 int i; 1027 1028 DPRINTF("set interface %d alt %d id %"PRIu64"\n", interface, alt, p->id); 1029 1030 for (i = 0; i < MAX_ENDPOINTS; i++) { 1031 if (dev->endpoint[i].interface == interface) { 1032 usbredir_stop_ep(dev, i); 1033 } 1034 } 1035 1036 set_alt.interface = interface; 1037 set_alt.alt = alt; 1038 usbredirparser_send_set_alt_setting(dev->parser, p->id, &set_alt); 1039 usbredirparser_do_write(dev->parser); 1040 p->status = USB_RET_ASYNC; 1041 } 1042 1043 static void usbredir_get_interface(USBRedirDevice *dev, USBPacket *p, 1044 int interface) 1045 { 1046 struct usb_redir_get_alt_setting_header get_alt; 1047 1048 DPRINTF("get interface %d id %"PRIu64"\n", interface, p->id); 1049 1050 get_alt.interface = interface; 1051 usbredirparser_send_get_alt_setting(dev->parser, p->id, &get_alt); 1052 usbredirparser_do_write(dev->parser); 1053 p->status = USB_RET_ASYNC; 1054 } 1055 1056 static void usbredir_handle_control(USBDevice *udev, USBPacket *p, 1057 int request, int value, int index, int length, uint8_t *data) 1058 { 1059 USBRedirDevice *dev = USB_REDIRECT(udev); 1060 struct usb_redir_control_packet_header control_packet; 1061 1062 if (usbredir_already_in_flight(dev, p->id)) { 1063 p->status = USB_RET_ASYNC; 1064 return; 1065 } 1066 1067 /* Special cases for certain standard device requests */ 1068 switch (request) { 1069 case DeviceOutRequest | USB_REQ_SET_ADDRESS: 1070 DPRINTF("set address %d\n", value); 1071 dev->dev.addr = value; 1072 return; 1073 case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: 1074 usbredir_set_config(dev, p, value & 0xff); 1075 return; 1076 case DeviceRequest | USB_REQ_GET_CONFIGURATION: 1077 usbredir_get_config(dev, p); 1078 return; 1079 case InterfaceOutRequest | USB_REQ_SET_INTERFACE: 1080 usbredir_set_interface(dev, p, index, value); 1081 return; 1082 case InterfaceRequest | USB_REQ_GET_INTERFACE: 1083 usbredir_get_interface(dev, p, index); 1084 return; 1085 } 1086 1087 /* Normal ctrl requests, note request is (bRequestType << 8) | bRequest */ 1088 DPRINTF( 1089 "ctrl-out type 0x%x req 0x%x val 0x%x index %d len %d id %"PRIu64"\n", 1090 request >> 8, request & 0xff, value, index, length, p->id); 1091 1092 control_packet.request = request & 0xFF; 1093 control_packet.requesttype = request >> 8; 1094 control_packet.endpoint = control_packet.requesttype & USB_DIR_IN; 1095 control_packet.value = value; 1096 control_packet.index = index; 1097 control_packet.length = length; 1098 1099 if (control_packet.requesttype & USB_DIR_IN) { 1100 usbredirparser_send_control_packet(dev->parser, p->id, 1101 &control_packet, NULL, 0); 1102 } else { 1103 usbredir_log_data(dev, "ctrl data out:", data, length); 1104 usbredirparser_send_control_packet(dev->parser, p->id, 1105 &control_packet, data, length); 1106 } 1107 usbredirparser_do_write(dev->parser); 1108 p->status = USB_RET_ASYNC; 1109 } 1110 1111 static int usbredir_alloc_streams(USBDevice *udev, USBEndpoint **eps, 1112 int nr_eps, int streams) 1113 { 1114 USBRedirDevice *dev = USB_REDIRECT(udev); 1115 #if USBREDIR_VERSION >= 0x000700 1116 struct usb_redir_alloc_bulk_streams_header alloc_streams; 1117 int i; 1118 1119 if (!usbredirparser_peer_has_cap(dev->parser, 1120 usb_redir_cap_bulk_streams)) { 1121 ERROR("peer does not support streams\n"); 1122 goto reject; 1123 } 1124 1125 if (streams == 0) { 1126 ERROR("request to allocate 0 streams\n"); 1127 return -1; 1128 } 1129 1130 alloc_streams.no_streams = streams; 1131 alloc_streams.endpoints = 0; 1132 for (i = 0; i < nr_eps; i++) { 1133 alloc_streams.endpoints |= 1 << USBEP2I(eps[i]); 1134 } 1135 usbredirparser_send_alloc_bulk_streams(dev->parser, 0, &alloc_streams); 1136 usbredirparser_do_write(dev->parser); 1137 1138 return 0; 1139 #else 1140 ERROR("usbredir_alloc_streams not implemented\n"); 1141 goto reject; 1142 #endif 1143 reject: 1144 ERROR("streams are not available, disconnecting\n"); 1145 qemu_bh_schedule(dev->device_reject_bh); 1146 return -1; 1147 } 1148 1149 static void usbredir_free_streams(USBDevice *udev, USBEndpoint **eps, 1150 int nr_eps) 1151 { 1152 #if USBREDIR_VERSION >= 0x000700 1153 USBRedirDevice *dev = USB_REDIRECT(udev); 1154 struct usb_redir_free_bulk_streams_header free_streams; 1155 int i; 1156 1157 if (!usbredirparser_peer_has_cap(dev->parser, 1158 usb_redir_cap_bulk_streams)) { 1159 return; 1160 } 1161 1162 free_streams.endpoints = 0; 1163 for (i = 0; i < nr_eps; i++) { 1164 free_streams.endpoints |= 1 << USBEP2I(eps[i]); 1165 } 1166 usbredirparser_send_free_bulk_streams(dev->parser, 0, &free_streams); 1167 usbredirparser_do_write(dev->parser); 1168 #endif 1169 } 1170 1171 /* 1172 * Close events can be triggered by usbredirparser_do_write which gets called 1173 * from within the USBDevice data / control packet callbacks and doing a 1174 * usb_detach from within these callbacks is not a good idea. 1175 * 1176 * So we use a bh handler to take care of close events. 1177 */ 1178 static void usbredir_chardev_close_bh(void *opaque) 1179 { 1180 USBRedirDevice *dev = opaque; 1181 1182 qemu_bh_cancel(dev->device_reject_bh); 1183 usbredir_device_disconnect(dev); 1184 1185 if (dev->parser) { 1186 DPRINTF("destroying usbredirparser\n"); 1187 usbredirparser_destroy(dev->parser); 1188 dev->parser = NULL; 1189 } 1190 if (dev->watch) { 1191 g_source_remove(dev->watch); 1192 dev->watch = 0; 1193 } 1194 } 1195 1196 static void usbredir_create_parser(USBRedirDevice *dev) 1197 { 1198 uint32_t caps[USB_REDIR_CAPS_SIZE] = { 0, }; 1199 int flags = 0; 1200 1201 DPRINTF("creating usbredirparser\n"); 1202 1203 dev->parser = qemu_oom_check(usbredirparser_create()); 1204 dev->parser->priv = dev; 1205 dev->parser->log_func = usbredir_log; 1206 dev->parser->read_func = usbredir_read; 1207 dev->parser->write_func = usbredir_write; 1208 dev->parser->hello_func = usbredir_hello; 1209 dev->parser->device_connect_func = usbredir_device_connect; 1210 dev->parser->device_disconnect_func = usbredir_device_disconnect; 1211 dev->parser->interface_info_func = usbredir_interface_info; 1212 dev->parser->ep_info_func = usbredir_ep_info; 1213 dev->parser->configuration_status_func = usbredir_configuration_status; 1214 dev->parser->alt_setting_status_func = usbredir_alt_setting_status; 1215 dev->parser->iso_stream_status_func = usbredir_iso_stream_status; 1216 dev->parser->interrupt_receiving_status_func = 1217 usbredir_interrupt_receiving_status; 1218 dev->parser->bulk_streams_status_func = usbredir_bulk_streams_status; 1219 dev->parser->bulk_receiving_status_func = usbredir_bulk_receiving_status; 1220 dev->parser->control_packet_func = usbredir_control_packet; 1221 dev->parser->bulk_packet_func = usbredir_bulk_packet; 1222 dev->parser->iso_packet_func = usbredir_iso_packet; 1223 dev->parser->interrupt_packet_func = usbredir_interrupt_packet; 1224 dev->parser->buffered_bulk_packet_func = usbredir_buffered_bulk_packet; 1225 dev->read_buf = NULL; 1226 dev->read_buf_size = 0; 1227 1228 usbredirparser_caps_set_cap(caps, usb_redir_cap_connect_device_version); 1229 usbredirparser_caps_set_cap(caps, usb_redir_cap_filter); 1230 usbredirparser_caps_set_cap(caps, usb_redir_cap_ep_info_max_packet_size); 1231 usbredirparser_caps_set_cap(caps, usb_redir_cap_64bits_ids); 1232 usbredirparser_caps_set_cap(caps, usb_redir_cap_32bits_bulk_length); 1233 usbredirparser_caps_set_cap(caps, usb_redir_cap_bulk_receiving); 1234 #if USBREDIR_VERSION >= 0x000700 1235 if (dev->enable_streams) { 1236 usbredirparser_caps_set_cap(caps, usb_redir_cap_bulk_streams); 1237 } 1238 #endif 1239 1240 if (runstate_check(RUN_STATE_INMIGRATE)) { 1241 flags |= usbredirparser_fl_no_hello; 1242 } 1243 usbredirparser_init(dev->parser, VERSION, caps, USB_REDIR_CAPS_SIZE, 1244 flags); 1245 usbredirparser_do_write(dev->parser); 1246 } 1247 1248 static void usbredir_reject_device(USBRedirDevice *dev) 1249 { 1250 usbredir_device_disconnect(dev); 1251 if (usbredirparser_peer_has_cap(dev->parser, usb_redir_cap_filter)) { 1252 usbredirparser_send_filter_reject(dev->parser); 1253 usbredirparser_do_write(dev->parser); 1254 } 1255 } 1256 1257 /* 1258 * We may need to reject the device when the hcd calls alloc_streams, doing 1259 * an usb_detach from within a hcd call is not a good idea, hence this bh. 1260 */ 1261 static void usbredir_device_reject_bh(void *opaque) 1262 { 1263 USBRedirDevice *dev = opaque; 1264 1265 usbredir_reject_device(dev); 1266 } 1267 1268 static void usbredir_do_attach(void *opaque) 1269 { 1270 USBRedirDevice *dev = opaque; 1271 Error *local_err = NULL; 1272 1273 /* In order to work properly with XHCI controllers we need these caps */ 1274 if ((dev->dev.port->speedmask & USB_SPEED_MASK_SUPER) && !( 1275 usbredirparser_peer_has_cap(dev->parser, 1276 usb_redir_cap_ep_info_max_packet_size) && 1277 usbredirparser_peer_has_cap(dev->parser, 1278 usb_redir_cap_32bits_bulk_length) && 1279 usbredirparser_peer_has_cap(dev->parser, 1280 usb_redir_cap_64bits_ids))) { 1281 ERROR("usb-redir-host lacks capabilities needed for use with XHCI\n"); 1282 usbredir_reject_device(dev); 1283 return; 1284 } 1285 1286 usb_device_attach(&dev->dev, &local_err); 1287 if (local_err) { 1288 error_report_err(local_err); 1289 WARNING("rejecting device due to speed mismatch\n"); 1290 usbredir_reject_device(dev); 1291 } 1292 } 1293 1294 /* 1295 * chardev callbacks 1296 */ 1297 1298 static int usbredir_chardev_can_read(void *opaque) 1299 { 1300 USBRedirDevice *dev = opaque; 1301 1302 if (!dev->parser) { 1303 WARNING("chardev_can_read called on non open chardev!\n"); 1304 return 0; 1305 } 1306 1307 /* Don't read new data from the chardev until our state is fully synced */ 1308 if (!runstate_check(RUN_STATE_RUNNING)) { 1309 return 0; 1310 } 1311 1312 /* usbredir_parser_do_read will consume *all* data we give it */ 1313 return 1024 * 1024; 1314 } 1315 1316 static void usbredir_chardev_read(void *opaque, const uint8_t *buf, int size) 1317 { 1318 USBRedirDevice *dev = opaque; 1319 1320 /* No recursion allowed! */ 1321 assert(dev->read_buf == NULL); 1322 1323 dev->read_buf = buf; 1324 dev->read_buf_size = size; 1325 1326 usbredirparser_do_read(dev->parser); 1327 /* Send any acks, etc. which may be queued now */ 1328 usbredirparser_do_write(dev->parser); 1329 } 1330 1331 static void usbredir_chardev_event(void *opaque, int event) 1332 { 1333 USBRedirDevice *dev = opaque; 1334 1335 switch (event) { 1336 case CHR_EVENT_OPENED: 1337 DPRINTF("chardev open\n"); 1338 /* Make sure any pending closes are handled (no-op if none pending) */ 1339 usbredir_chardev_close_bh(dev); 1340 qemu_bh_cancel(dev->chardev_close_bh); 1341 usbredir_create_parser(dev); 1342 break; 1343 case CHR_EVENT_CLOSED: 1344 DPRINTF("chardev close\n"); 1345 qemu_bh_schedule(dev->chardev_close_bh); 1346 break; 1347 } 1348 } 1349 1350 /* 1351 * init + destroy 1352 */ 1353 1354 static void usbredir_vm_state_change(void *priv, int running, RunState state) 1355 { 1356 USBRedirDevice *dev = priv; 1357 1358 if (state == RUN_STATE_RUNNING && dev->parser != NULL) { 1359 usbredirparser_do_write(dev->parser); /* Flush any pending writes */ 1360 } 1361 } 1362 1363 static void usbredir_init_endpoints(USBRedirDevice *dev) 1364 { 1365 int i; 1366 1367 usb_ep_init(&dev->dev); 1368 memset(dev->endpoint, 0, sizeof(dev->endpoint)); 1369 for (i = 0; i < MAX_ENDPOINTS; i++) { 1370 dev->endpoint[i].dev = dev; 1371 QTAILQ_INIT(&dev->endpoint[i].bufpq); 1372 } 1373 } 1374 1375 static void usbredir_realize(USBDevice *udev, Error **errp) 1376 { 1377 USBRedirDevice *dev = USB_REDIRECT(udev); 1378 int i; 1379 1380 if (!qemu_chr_fe_get_driver(&dev->cs)) { 1381 error_setg(errp, QERR_MISSING_PARAMETER, "chardev"); 1382 return; 1383 } 1384 1385 if (dev->filter_str) { 1386 i = usbredirfilter_string_to_rules(dev->filter_str, ":", "|", 1387 &dev->filter_rules, 1388 &dev->filter_rules_count); 1389 if (i) { 1390 error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "filter", 1391 "a usb device filter string"); 1392 return; 1393 } 1394 } 1395 1396 dev->chardev_close_bh = qemu_bh_new(usbredir_chardev_close_bh, dev); 1397 dev->device_reject_bh = qemu_bh_new(usbredir_device_reject_bh, dev); 1398 dev->attach_timer = timer_new_ms(QEMU_CLOCK_VIRTUAL, usbredir_do_attach, dev); 1399 1400 packet_id_queue_init(&dev->cancelled, dev, "cancelled"); 1401 packet_id_queue_init(&dev->already_in_flight, dev, "already-in-flight"); 1402 usbredir_init_endpoints(dev); 1403 1404 /* We'll do the attach once we receive the speed from the usb-host */ 1405 udev->auto_attach = 0; 1406 1407 /* Will be cleared during setup when we find conflicts */ 1408 dev->compatible_speedmask = USB_SPEED_MASK_FULL | USB_SPEED_MASK_HIGH; 1409 1410 /* Let the backend know we are ready */ 1411 qemu_chr_fe_set_handlers(&dev->cs, usbredir_chardev_can_read, 1412 usbredir_chardev_read, usbredir_chardev_event, 1413 dev, NULL, true); 1414 1415 dev->vmstate = 1416 qemu_add_vm_change_state_handler(usbredir_vm_state_change, dev); 1417 } 1418 1419 static void usbredir_cleanup_device_queues(USBRedirDevice *dev) 1420 { 1421 int i; 1422 1423 packet_id_queue_empty(&dev->cancelled); 1424 packet_id_queue_empty(&dev->already_in_flight); 1425 for (i = 0; i < MAX_ENDPOINTS; i++) { 1426 usbredir_free_bufpq(dev, I2EP(i)); 1427 } 1428 } 1429 1430 static void usbredir_unrealize(USBDevice *udev, Error **errp) 1431 { 1432 USBRedirDevice *dev = USB_REDIRECT(udev); 1433 Chardev *chr = qemu_chr_fe_get_driver(&dev->cs); 1434 1435 qemu_chr_fe_deinit(&dev->cs); 1436 qemu_chr_delete(chr); 1437 1438 /* Note must be done after qemu_chr_close, as that causes a close event */ 1439 qemu_bh_delete(dev->chardev_close_bh); 1440 qemu_bh_delete(dev->device_reject_bh); 1441 1442 timer_del(dev->attach_timer); 1443 timer_free(dev->attach_timer); 1444 1445 usbredir_cleanup_device_queues(dev); 1446 1447 if (dev->parser) { 1448 usbredirparser_destroy(dev->parser); 1449 } 1450 if (dev->watch) { 1451 g_source_remove(dev->watch); 1452 } 1453 1454 free(dev->filter_rules); 1455 qemu_del_vm_change_state_handler(dev->vmstate); 1456 } 1457 1458 static int usbredir_check_filter(USBRedirDevice *dev) 1459 { 1460 if (dev->interface_info.interface_count == NO_INTERFACE_INFO) { 1461 ERROR("No interface info for device\n"); 1462 goto error; 1463 } 1464 1465 if (dev->filter_rules) { 1466 if (!usbredirparser_peer_has_cap(dev->parser, 1467 usb_redir_cap_connect_device_version)) { 1468 ERROR("Device filter specified and peer does not have the " 1469 "connect_device_version capability\n"); 1470 goto error; 1471 } 1472 1473 if (usbredirfilter_check( 1474 dev->filter_rules, 1475 dev->filter_rules_count, 1476 dev->device_info.device_class, 1477 dev->device_info.device_subclass, 1478 dev->device_info.device_protocol, 1479 dev->interface_info.interface_class, 1480 dev->interface_info.interface_subclass, 1481 dev->interface_info.interface_protocol, 1482 dev->interface_info.interface_count, 1483 dev->device_info.vendor_id, 1484 dev->device_info.product_id, 1485 dev->device_info.device_version_bcd, 1486 0) != 0) { 1487 goto error; 1488 } 1489 } 1490 1491 return 0; 1492 1493 error: 1494 usbredir_reject_device(dev); 1495 return -1; 1496 } 1497 1498 static void usbredir_check_bulk_receiving(USBRedirDevice *dev) 1499 { 1500 int i, j, quirks; 1501 1502 if (!usbredirparser_peer_has_cap(dev->parser, 1503 usb_redir_cap_bulk_receiving)) { 1504 return; 1505 } 1506 1507 for (i = EP2I(USB_DIR_IN); i < MAX_ENDPOINTS; i++) { 1508 dev->endpoint[i].bulk_receiving_enabled = 0; 1509 } 1510 for (i = 0; i < dev->interface_info.interface_count; i++) { 1511 quirks = usb_get_quirks(dev->device_info.vendor_id, 1512 dev->device_info.product_id, 1513 dev->interface_info.interface_class[i], 1514 dev->interface_info.interface_subclass[i], 1515 dev->interface_info.interface_protocol[i]); 1516 if (!(quirks & USB_QUIRK_BUFFER_BULK_IN)) { 1517 continue; 1518 } 1519 if (quirks & USB_QUIRK_IS_FTDI) { 1520 dev->buffered_bulk_in_complete = 1521 usbredir_buffered_bulk_in_complete_ftdi; 1522 } else { 1523 dev->buffered_bulk_in_complete = 1524 usbredir_buffered_bulk_in_complete_raw; 1525 } 1526 1527 for (j = EP2I(USB_DIR_IN); j < MAX_ENDPOINTS; j++) { 1528 if (dev->endpoint[j].interface == 1529 dev->interface_info.interface[i] && 1530 dev->endpoint[j].type == USB_ENDPOINT_XFER_BULK && 1531 dev->endpoint[j].max_packet_size != 0) { 1532 dev->endpoint[j].bulk_receiving_enabled = 1; 1533 /* 1534 * With buffering pipelining is not necessary. Also packet 1535 * combining and bulk in buffering don't play nice together! 1536 */ 1537 I2USBEP(dev, j)->pipeline = false; 1538 break; /* Only buffer for the first ep of each intf */ 1539 } 1540 } 1541 } 1542 } 1543 1544 /* 1545 * usbredirparser packet complete callbacks 1546 */ 1547 1548 static void usbredir_handle_status(USBRedirDevice *dev, USBPacket *p, 1549 int status) 1550 { 1551 switch (status) { 1552 case usb_redir_success: 1553 p->status = USB_RET_SUCCESS; /* Clear previous ASYNC status */ 1554 break; 1555 case usb_redir_stall: 1556 p->status = USB_RET_STALL; 1557 break; 1558 case usb_redir_cancelled: 1559 /* 1560 * When the usbredir-host unredirects a device, it will report a status 1561 * of cancelled for all pending packets, followed by a disconnect msg. 1562 */ 1563 p->status = USB_RET_IOERROR; 1564 break; 1565 case usb_redir_inval: 1566 WARNING("got invalid param error from usb-host?\n"); 1567 p->status = USB_RET_IOERROR; 1568 break; 1569 case usb_redir_babble: 1570 p->status = USB_RET_BABBLE; 1571 break; 1572 case usb_redir_ioerror: 1573 case usb_redir_timeout: 1574 default: 1575 p->status = USB_RET_IOERROR; 1576 } 1577 } 1578 1579 static void usbredir_hello(void *priv, struct usb_redir_hello_header *h) 1580 { 1581 USBRedirDevice *dev = priv; 1582 1583 /* Try to send the filter info now that we've the usb-host's caps */ 1584 if (usbredirparser_peer_has_cap(dev->parser, usb_redir_cap_filter) && 1585 dev->filter_rules) { 1586 usbredirparser_send_filter_filter(dev->parser, dev->filter_rules, 1587 dev->filter_rules_count); 1588 usbredirparser_do_write(dev->parser); 1589 } 1590 } 1591 1592 static void usbredir_device_connect(void *priv, 1593 struct usb_redir_device_connect_header *device_connect) 1594 { 1595 USBRedirDevice *dev = priv; 1596 const char *speed; 1597 1598 if (timer_pending(dev->attach_timer) || dev->dev.attached) { 1599 ERROR("Received device connect while already connected\n"); 1600 return; 1601 } 1602 1603 switch (device_connect->speed) { 1604 case usb_redir_speed_low: 1605 speed = "low speed"; 1606 dev->dev.speed = USB_SPEED_LOW; 1607 dev->compatible_speedmask &= ~USB_SPEED_MASK_FULL; 1608 dev->compatible_speedmask &= ~USB_SPEED_MASK_HIGH; 1609 break; 1610 case usb_redir_speed_full: 1611 speed = "full speed"; 1612 dev->dev.speed = USB_SPEED_FULL; 1613 dev->compatible_speedmask &= ~USB_SPEED_MASK_HIGH; 1614 break; 1615 case usb_redir_speed_high: 1616 speed = "high speed"; 1617 dev->dev.speed = USB_SPEED_HIGH; 1618 break; 1619 case usb_redir_speed_super: 1620 speed = "super speed"; 1621 dev->dev.speed = USB_SPEED_SUPER; 1622 break; 1623 default: 1624 speed = "unknown speed"; 1625 dev->dev.speed = USB_SPEED_FULL; 1626 } 1627 1628 if (usbredirparser_peer_has_cap(dev->parser, 1629 usb_redir_cap_connect_device_version)) { 1630 INFO("attaching %s device %04x:%04x version %d.%d class %02x\n", 1631 speed, device_connect->vendor_id, device_connect->product_id, 1632 ((device_connect->device_version_bcd & 0xf000) >> 12) * 10 + 1633 ((device_connect->device_version_bcd & 0x0f00) >> 8), 1634 ((device_connect->device_version_bcd & 0x00f0) >> 4) * 10 + 1635 ((device_connect->device_version_bcd & 0x000f) >> 0), 1636 device_connect->device_class); 1637 } else { 1638 INFO("attaching %s device %04x:%04x class %02x\n", speed, 1639 device_connect->vendor_id, device_connect->product_id, 1640 device_connect->device_class); 1641 } 1642 1643 dev->dev.speedmask = (1 << dev->dev.speed) | dev->compatible_speedmask; 1644 dev->device_info = *device_connect; 1645 1646 if (usbredir_check_filter(dev)) { 1647 WARNING("Device %04x:%04x rejected by device filter, not attaching\n", 1648 device_connect->vendor_id, device_connect->product_id); 1649 return; 1650 } 1651 1652 usbredir_check_bulk_receiving(dev); 1653 timer_mod(dev->attach_timer, dev->next_attach_time); 1654 } 1655 1656 static void usbredir_device_disconnect(void *priv) 1657 { 1658 USBRedirDevice *dev = priv; 1659 1660 /* Stop any pending attaches */ 1661 timer_del(dev->attach_timer); 1662 1663 if (dev->dev.attached) { 1664 DPRINTF("detaching device\n"); 1665 usb_device_detach(&dev->dev); 1666 /* 1667 * Delay next usb device attach to give the guest a chance to see 1668 * see the detach / attach in case of quick close / open succession 1669 */ 1670 dev->next_attach_time = qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) + 200; 1671 } 1672 1673 /* Reset state so that the next dev connected starts with a clean slate */ 1674 usbredir_cleanup_device_queues(dev); 1675 usbredir_init_endpoints(dev); 1676 dev->interface_info.interface_count = NO_INTERFACE_INFO; 1677 dev->dev.addr = 0; 1678 dev->dev.speed = 0; 1679 dev->compatible_speedmask = USB_SPEED_MASK_FULL | USB_SPEED_MASK_HIGH; 1680 } 1681 1682 static void usbredir_interface_info(void *priv, 1683 struct usb_redir_interface_info_header *interface_info) 1684 { 1685 USBRedirDevice *dev = priv; 1686 1687 dev->interface_info = *interface_info; 1688 1689 /* 1690 * If we receive interface info after the device has already been 1691 * connected (ie on a set_config), re-check interface dependent things. 1692 */ 1693 if (timer_pending(dev->attach_timer) || dev->dev.attached) { 1694 usbredir_check_bulk_receiving(dev); 1695 if (usbredir_check_filter(dev)) { 1696 ERROR("Device no longer matches filter after interface info " 1697 "change, disconnecting!\n"); 1698 } 1699 } 1700 } 1701 1702 static void usbredir_mark_speed_incompatible(USBRedirDevice *dev, int speed) 1703 { 1704 dev->compatible_speedmask &= ~(1 << speed); 1705 dev->dev.speedmask = (1 << dev->dev.speed) | dev->compatible_speedmask; 1706 } 1707 1708 static void usbredir_set_pipeline(USBRedirDevice *dev, struct USBEndpoint *uep) 1709 { 1710 if (uep->type != USB_ENDPOINT_XFER_BULK) { 1711 return; 1712 } 1713 if (uep->pid == USB_TOKEN_OUT) { 1714 uep->pipeline = true; 1715 } 1716 if (uep->pid == USB_TOKEN_IN && uep->max_packet_size != 0 && 1717 usbredirparser_peer_has_cap(dev->parser, 1718 usb_redir_cap_32bits_bulk_length)) { 1719 uep->pipeline = true; 1720 } 1721 } 1722 1723 static void usbredir_setup_usb_eps(USBRedirDevice *dev) 1724 { 1725 struct USBEndpoint *usb_ep; 1726 int i; 1727 1728 for (i = 0; i < MAX_ENDPOINTS; i++) { 1729 usb_ep = I2USBEP(dev, i); 1730 usb_ep->type = dev->endpoint[i].type; 1731 usb_ep->ifnum = dev->endpoint[i].interface; 1732 usb_ep->max_packet_size = dev->endpoint[i].max_packet_size; 1733 usb_ep->max_streams = dev->endpoint[i].max_streams; 1734 usbredir_set_pipeline(dev, usb_ep); 1735 } 1736 } 1737 1738 static void usbredir_ep_info(void *priv, 1739 struct usb_redir_ep_info_header *ep_info) 1740 { 1741 USBRedirDevice *dev = priv; 1742 int i; 1743 1744 for (i = 0; i < MAX_ENDPOINTS; i++) { 1745 dev->endpoint[i].type = ep_info->type[i]; 1746 dev->endpoint[i].interval = ep_info->interval[i]; 1747 dev->endpoint[i].interface = ep_info->interface[i]; 1748 if (usbredirparser_peer_has_cap(dev->parser, 1749 usb_redir_cap_ep_info_max_packet_size)) { 1750 dev->endpoint[i].max_packet_size = ep_info->max_packet_size[i]; 1751 } 1752 #if USBREDIR_VERSION >= 0x000700 1753 if (usbredirparser_peer_has_cap(dev->parser, 1754 usb_redir_cap_bulk_streams)) { 1755 dev->endpoint[i].max_streams = ep_info->max_streams[i]; 1756 } 1757 #endif 1758 switch (dev->endpoint[i].type) { 1759 case usb_redir_type_invalid: 1760 break; 1761 case usb_redir_type_iso: 1762 usbredir_mark_speed_incompatible(dev, USB_SPEED_FULL); 1763 usbredir_mark_speed_incompatible(dev, USB_SPEED_HIGH); 1764 /* Fall through */ 1765 case usb_redir_type_interrupt: 1766 if (!usbredirparser_peer_has_cap(dev->parser, 1767 usb_redir_cap_ep_info_max_packet_size) || 1768 ep_info->max_packet_size[i] > 64) { 1769 usbredir_mark_speed_incompatible(dev, USB_SPEED_FULL); 1770 } 1771 if (!usbredirparser_peer_has_cap(dev->parser, 1772 usb_redir_cap_ep_info_max_packet_size) || 1773 ep_info->max_packet_size[i] > 1024) { 1774 usbredir_mark_speed_incompatible(dev, USB_SPEED_HIGH); 1775 } 1776 if (dev->endpoint[i].interval == 0) { 1777 ERROR("Received 0 interval for isoc or irq endpoint\n"); 1778 usbredir_reject_device(dev); 1779 return; 1780 } 1781 /* Fall through */ 1782 case usb_redir_type_control: 1783 case usb_redir_type_bulk: 1784 DPRINTF("ep: %02X type: %d interface: %d\n", I2EP(i), 1785 dev->endpoint[i].type, dev->endpoint[i].interface); 1786 break; 1787 default: 1788 ERROR("Received invalid endpoint type\n"); 1789 usbredir_reject_device(dev); 1790 return; 1791 } 1792 } 1793 /* The new ep info may have caused a speed incompatibility, recheck */ 1794 if (dev->dev.attached && 1795 !(dev->dev.port->speedmask & dev->dev.speedmask)) { 1796 ERROR("Device no longer matches speed after endpoint info change, " 1797 "disconnecting!\n"); 1798 usbredir_reject_device(dev); 1799 return; 1800 } 1801 usbredir_setup_usb_eps(dev); 1802 usbredir_check_bulk_receiving(dev); 1803 } 1804 1805 static void usbredir_configuration_status(void *priv, uint64_t id, 1806 struct usb_redir_configuration_status_header *config_status) 1807 { 1808 USBRedirDevice *dev = priv; 1809 USBPacket *p; 1810 1811 DPRINTF("set config status %d config %d id %"PRIu64"\n", 1812 config_status->status, config_status->configuration, id); 1813 1814 p = usbredir_find_packet_by_id(dev, 0, id); 1815 if (p) { 1816 if (dev->dev.setup_buf[0] & USB_DIR_IN) { 1817 dev->dev.data_buf[0] = config_status->configuration; 1818 p->actual_length = 1; 1819 } 1820 usbredir_handle_status(dev, p, config_status->status); 1821 usb_generic_async_ctrl_complete(&dev->dev, p); 1822 } 1823 } 1824 1825 static void usbredir_alt_setting_status(void *priv, uint64_t id, 1826 struct usb_redir_alt_setting_status_header *alt_setting_status) 1827 { 1828 USBRedirDevice *dev = priv; 1829 USBPacket *p; 1830 1831 DPRINTF("alt status %d intf %d alt %d id: %"PRIu64"\n", 1832 alt_setting_status->status, alt_setting_status->interface, 1833 alt_setting_status->alt, id); 1834 1835 p = usbredir_find_packet_by_id(dev, 0, id); 1836 if (p) { 1837 if (dev->dev.setup_buf[0] & USB_DIR_IN) { 1838 dev->dev.data_buf[0] = alt_setting_status->alt; 1839 p->actual_length = 1; 1840 } 1841 usbredir_handle_status(dev, p, alt_setting_status->status); 1842 usb_generic_async_ctrl_complete(&dev->dev, p); 1843 } 1844 } 1845 1846 static void usbredir_iso_stream_status(void *priv, uint64_t id, 1847 struct usb_redir_iso_stream_status_header *iso_stream_status) 1848 { 1849 USBRedirDevice *dev = priv; 1850 uint8_t ep = iso_stream_status->endpoint; 1851 1852 DPRINTF("iso status %d ep %02X id %"PRIu64"\n", iso_stream_status->status, 1853 ep, id); 1854 1855 if (!dev->dev.attached || !dev->endpoint[EP2I(ep)].iso_started) { 1856 return; 1857 } 1858 1859 dev->endpoint[EP2I(ep)].iso_error = iso_stream_status->status; 1860 if (iso_stream_status->status == usb_redir_stall) { 1861 DPRINTF("iso stream stopped by peer ep %02X\n", ep); 1862 dev->endpoint[EP2I(ep)].iso_started = 0; 1863 } 1864 } 1865 1866 static void usbredir_interrupt_receiving_status(void *priv, uint64_t id, 1867 struct usb_redir_interrupt_receiving_status_header 1868 *interrupt_receiving_status) 1869 { 1870 USBRedirDevice *dev = priv; 1871 uint8_t ep = interrupt_receiving_status->endpoint; 1872 1873 DPRINTF("interrupt recv status %d ep %02X id %"PRIu64"\n", 1874 interrupt_receiving_status->status, ep, id); 1875 1876 if (!dev->dev.attached || !dev->endpoint[EP2I(ep)].interrupt_started) { 1877 return; 1878 } 1879 1880 dev->endpoint[EP2I(ep)].interrupt_error = 1881 interrupt_receiving_status->status; 1882 if (interrupt_receiving_status->status == usb_redir_stall) { 1883 DPRINTF("interrupt receiving stopped by peer ep %02X\n", ep); 1884 dev->endpoint[EP2I(ep)].interrupt_started = 0; 1885 } 1886 } 1887 1888 static void usbredir_bulk_streams_status(void *priv, uint64_t id, 1889 struct usb_redir_bulk_streams_status_header *bulk_streams_status) 1890 { 1891 #if USBREDIR_VERSION >= 0x000700 1892 USBRedirDevice *dev = priv; 1893 1894 if (bulk_streams_status->status == usb_redir_success) { 1895 DPRINTF("bulk streams status %d eps %08x\n", 1896 bulk_streams_status->status, bulk_streams_status->endpoints); 1897 } else { 1898 ERROR("bulk streams %s failed status %d eps %08x\n", 1899 (bulk_streams_status->no_streams == 0) ? "free" : "alloc", 1900 bulk_streams_status->status, bulk_streams_status->endpoints); 1901 ERROR("usb-redir-host does not provide streams, disconnecting\n"); 1902 usbredir_reject_device(dev); 1903 } 1904 #endif 1905 } 1906 1907 static void usbredir_bulk_receiving_status(void *priv, uint64_t id, 1908 struct usb_redir_bulk_receiving_status_header *bulk_receiving_status) 1909 { 1910 USBRedirDevice *dev = priv; 1911 uint8_t ep = bulk_receiving_status->endpoint; 1912 1913 DPRINTF("bulk recv status %d ep %02X id %"PRIu64"\n", 1914 bulk_receiving_status->status, ep, id); 1915 1916 if (!dev->dev.attached || !dev->endpoint[EP2I(ep)].bulk_receiving_started) { 1917 return; 1918 } 1919 1920 if (bulk_receiving_status->status == usb_redir_stall) { 1921 DPRINTF("bulk receiving stopped by peer ep %02X\n", ep); 1922 dev->endpoint[EP2I(ep)].bulk_receiving_started = 0; 1923 } 1924 } 1925 1926 static void usbredir_control_packet(void *priv, uint64_t id, 1927 struct usb_redir_control_packet_header *control_packet, 1928 uint8_t *data, int data_len) 1929 { 1930 USBRedirDevice *dev = priv; 1931 USBPacket *p; 1932 int len = control_packet->length; 1933 1934 DPRINTF("ctrl-in status %d len %d id %"PRIu64"\n", control_packet->status, 1935 len, id); 1936 1937 /* Fix up USB-3 ep0 maxpacket size to allow superspeed connected devices 1938 * to work redirected to a not superspeed capable hcd */ 1939 if (dev->dev.speed == USB_SPEED_SUPER && 1940 !((dev->dev.port->speedmask & USB_SPEED_MASK_SUPER)) && 1941 control_packet->requesttype == 0x80 && 1942 control_packet->request == 6 && 1943 control_packet->value == 0x100 && control_packet->index == 0 && 1944 data_len >= 18 && data[7] == 9) { 1945 data[7] = 64; 1946 } 1947 1948 p = usbredir_find_packet_by_id(dev, 0, id); 1949 if (p) { 1950 usbredir_handle_status(dev, p, control_packet->status); 1951 if (data_len > 0) { 1952 usbredir_log_data(dev, "ctrl data in:", data, data_len); 1953 if (data_len > sizeof(dev->dev.data_buf)) { 1954 ERROR("ctrl buffer too small (%d > %zu)\n", 1955 data_len, sizeof(dev->dev.data_buf)); 1956 p->status = USB_RET_STALL; 1957 data_len = len = sizeof(dev->dev.data_buf); 1958 } 1959 memcpy(dev->dev.data_buf, data, data_len); 1960 } 1961 p->actual_length = len; 1962 usb_generic_async_ctrl_complete(&dev->dev, p); 1963 } 1964 free(data); 1965 } 1966 1967 static void usbredir_bulk_packet(void *priv, uint64_t id, 1968 struct usb_redir_bulk_packet_header *bulk_packet, 1969 uint8_t *data, int data_len) 1970 { 1971 USBRedirDevice *dev = priv; 1972 uint8_t ep = bulk_packet->endpoint; 1973 int len = (bulk_packet->length_high << 16) | bulk_packet->length; 1974 USBPacket *p; 1975 1976 DPRINTF("bulk-in status %d ep %02X stream %u len %d id %"PRIu64"\n", 1977 bulk_packet->status, ep, bulk_packet->stream_id, len, id); 1978 1979 p = usbredir_find_packet_by_id(dev, ep, id); 1980 if (p) { 1981 size_t size = usb_packet_size(p); 1982 usbredir_handle_status(dev, p, bulk_packet->status); 1983 if (data_len > 0) { 1984 usbredir_log_data(dev, "bulk data in:", data, data_len); 1985 if (data_len > size) { 1986 ERROR("bulk got more data then requested (%d > %zd)\n", 1987 data_len, p->iov.size); 1988 p->status = USB_RET_BABBLE; 1989 data_len = len = size; 1990 } 1991 usb_packet_copy(p, data, data_len); 1992 } 1993 p->actual_length = len; 1994 if (p->pid == USB_TOKEN_IN && p->ep->pipeline) { 1995 usb_combined_input_packet_complete(&dev->dev, p); 1996 } else { 1997 usb_packet_complete(&dev->dev, p); 1998 } 1999 } 2000 free(data); 2001 } 2002 2003 static void usbredir_iso_packet(void *priv, uint64_t id, 2004 struct usb_redir_iso_packet_header *iso_packet, 2005 uint8_t *data, int data_len) 2006 { 2007 USBRedirDevice *dev = priv; 2008 uint8_t ep = iso_packet->endpoint; 2009 2010 DPRINTF2("iso-in status %d ep %02X len %d id %"PRIu64"\n", 2011 iso_packet->status, ep, data_len, id); 2012 2013 if (dev->endpoint[EP2I(ep)].type != USB_ENDPOINT_XFER_ISOC) { 2014 ERROR("received iso packet for non iso endpoint %02X\n", ep); 2015 free(data); 2016 return; 2017 } 2018 2019 if (dev->endpoint[EP2I(ep)].iso_started == 0) { 2020 DPRINTF("received iso packet for non started stream ep %02X\n", ep); 2021 free(data); 2022 return; 2023 } 2024 2025 /* bufp_alloc also adds the packet to the ep queue */ 2026 bufp_alloc(dev, data, data_len, iso_packet->status, ep, data); 2027 } 2028 2029 static void usbredir_interrupt_packet(void *priv, uint64_t id, 2030 struct usb_redir_interrupt_packet_header *interrupt_packet, 2031 uint8_t *data, int data_len) 2032 { 2033 USBRedirDevice *dev = priv; 2034 uint8_t ep = interrupt_packet->endpoint; 2035 2036 DPRINTF("interrupt-in status %d ep %02X len %d id %"PRIu64"\n", 2037 interrupt_packet->status, ep, data_len, id); 2038 2039 if (dev->endpoint[EP2I(ep)].type != USB_ENDPOINT_XFER_INT) { 2040 ERROR("received int packet for non interrupt endpoint %02X\n", ep); 2041 free(data); 2042 return; 2043 } 2044 2045 if (ep & USB_DIR_IN) { 2046 bool q_was_empty; 2047 2048 if (dev->endpoint[EP2I(ep)].interrupt_started == 0) { 2049 DPRINTF("received int packet while not started ep %02X\n", ep); 2050 free(data); 2051 return; 2052 } 2053 2054 q_was_empty = QTAILQ_EMPTY(&dev->endpoint[EP2I(ep)].bufpq); 2055 2056 /* bufp_alloc also adds the packet to the ep queue */ 2057 bufp_alloc(dev, data, data_len, interrupt_packet->status, ep, data); 2058 2059 if (q_was_empty) { 2060 usb_wakeup(usb_ep_get(&dev->dev, USB_TOKEN_IN, ep & 0x0f), 0); 2061 } 2062 } else { 2063 /* 2064 * We report output interrupt packets as completed directly upon 2065 * submission, so all we can do here if one failed is warn. 2066 */ 2067 if (interrupt_packet->status) { 2068 WARNING("interrupt output failed status %d ep %02X id %"PRIu64"\n", 2069 interrupt_packet->status, ep, id); 2070 } 2071 } 2072 } 2073 2074 static void usbredir_buffered_bulk_packet(void *priv, uint64_t id, 2075 struct usb_redir_buffered_bulk_packet_header *buffered_bulk_packet, 2076 uint8_t *data, int data_len) 2077 { 2078 USBRedirDevice *dev = priv; 2079 uint8_t status, ep = buffered_bulk_packet->endpoint; 2080 void *free_on_destroy; 2081 int i, len; 2082 2083 DPRINTF("buffered-bulk-in status %d ep %02X len %d id %"PRIu64"\n", 2084 buffered_bulk_packet->status, ep, data_len, id); 2085 2086 if (dev->endpoint[EP2I(ep)].type != USB_ENDPOINT_XFER_BULK) { 2087 ERROR("received buffered-bulk packet for non bulk ep %02X\n", ep); 2088 free(data); 2089 return; 2090 } 2091 2092 if (dev->endpoint[EP2I(ep)].bulk_receiving_started == 0) { 2093 DPRINTF("received buffered-bulk packet on not started ep %02X\n", ep); 2094 free(data); 2095 return; 2096 } 2097 2098 /* Data must be in maxp chunks for buffered_bulk_add_*_data_to_packet */ 2099 len = dev->endpoint[EP2I(ep)].max_packet_size; 2100 status = usb_redir_success; 2101 free_on_destroy = NULL; 2102 for (i = 0; i < data_len; i += len) { 2103 int r; 2104 if (len >= (data_len - i)) { 2105 len = data_len - i; 2106 status = buffered_bulk_packet->status; 2107 free_on_destroy = data; 2108 } 2109 /* bufp_alloc also adds the packet to the ep queue */ 2110 r = bufp_alloc(dev, data + i, len, status, ep, free_on_destroy); 2111 if (r) { 2112 break; 2113 } 2114 } 2115 2116 if (dev->endpoint[EP2I(ep)].pending_async_packet) { 2117 USBPacket *p = dev->endpoint[EP2I(ep)].pending_async_packet; 2118 dev->endpoint[EP2I(ep)].pending_async_packet = NULL; 2119 usbredir_buffered_bulk_in_complete(dev, p, ep); 2120 usb_packet_complete(&dev->dev, p); 2121 } 2122 } 2123 2124 /* 2125 * Migration code 2126 */ 2127 2128 static void usbredir_pre_save(void *priv) 2129 { 2130 USBRedirDevice *dev = priv; 2131 2132 usbredir_fill_already_in_flight(dev); 2133 } 2134 2135 static int usbredir_post_load(void *priv, int version_id) 2136 { 2137 USBRedirDevice *dev = priv; 2138 2139 if (dev->parser == NULL) { 2140 return 0; 2141 } 2142 2143 switch (dev->device_info.speed) { 2144 case usb_redir_speed_low: 2145 dev->dev.speed = USB_SPEED_LOW; 2146 break; 2147 case usb_redir_speed_full: 2148 dev->dev.speed = USB_SPEED_FULL; 2149 break; 2150 case usb_redir_speed_high: 2151 dev->dev.speed = USB_SPEED_HIGH; 2152 break; 2153 case usb_redir_speed_super: 2154 dev->dev.speed = USB_SPEED_SUPER; 2155 break; 2156 default: 2157 dev->dev.speed = USB_SPEED_FULL; 2158 } 2159 dev->dev.speedmask = (1 << dev->dev.speed); 2160 2161 usbredir_setup_usb_eps(dev); 2162 usbredir_check_bulk_receiving(dev); 2163 2164 return 0; 2165 } 2166 2167 /* For usbredirparser migration */ 2168 static int usbredir_put_parser(QEMUFile *f, void *priv, size_t unused, 2169 VMStateField *field, QJSON *vmdesc) 2170 { 2171 USBRedirDevice *dev = priv; 2172 uint8_t *data; 2173 int len; 2174 2175 if (dev->parser == NULL) { 2176 qemu_put_be32(f, 0); 2177 return 0; 2178 } 2179 2180 usbredirparser_serialize(dev->parser, &data, &len); 2181 qemu_oom_check(data); 2182 2183 qemu_put_be32(f, len); 2184 qemu_put_buffer(f, data, len); 2185 2186 free(data); 2187 2188 return 0; 2189 } 2190 2191 static int usbredir_get_parser(QEMUFile *f, void *priv, size_t unused, 2192 VMStateField *field) 2193 { 2194 USBRedirDevice *dev = priv; 2195 uint8_t *data; 2196 int len, ret; 2197 2198 len = qemu_get_be32(f); 2199 if (len == 0) { 2200 return 0; 2201 } 2202 2203 /* 2204 * If our chardev is not open already at this point the usbredir connection 2205 * has been broken (non seamless migration, or restore from disk). 2206 * 2207 * In this case create a temporary parser to receive the migration data, 2208 * and schedule the close_bh to report the device as disconnected to the 2209 * guest and to destroy the parser again. 2210 */ 2211 if (dev->parser == NULL) { 2212 WARNING("usb-redir connection broken during migration\n"); 2213 usbredir_create_parser(dev); 2214 qemu_bh_schedule(dev->chardev_close_bh); 2215 } 2216 2217 data = g_malloc(len); 2218 qemu_get_buffer(f, data, len); 2219 2220 ret = usbredirparser_unserialize(dev->parser, data, len); 2221 2222 g_free(data); 2223 2224 return ret; 2225 } 2226 2227 static const VMStateInfo usbredir_parser_vmstate_info = { 2228 .name = "usb-redir-parser", 2229 .put = usbredir_put_parser, 2230 .get = usbredir_get_parser, 2231 }; 2232 2233 2234 /* For buffered packets (iso/irq) queue migration */ 2235 static int usbredir_put_bufpq(QEMUFile *f, void *priv, size_t unused, 2236 VMStateField *field, QJSON *vmdesc) 2237 { 2238 struct endp_data *endp = priv; 2239 USBRedirDevice *dev = endp->dev; 2240 struct buf_packet *bufp; 2241 int len, i = 0; 2242 2243 qemu_put_be32(f, endp->bufpq_size); 2244 QTAILQ_FOREACH(bufp, &endp->bufpq, next) { 2245 len = bufp->len - bufp->offset; 2246 DPRINTF("put_bufpq %d/%d len %d status %d\n", i + 1, endp->bufpq_size, 2247 len, bufp->status); 2248 qemu_put_be32(f, len); 2249 qemu_put_be32(f, bufp->status); 2250 qemu_put_buffer(f, bufp->data + bufp->offset, len); 2251 i++; 2252 } 2253 assert(i == endp->bufpq_size); 2254 2255 return 0; 2256 } 2257 2258 static int usbredir_get_bufpq(QEMUFile *f, void *priv, size_t unused, 2259 VMStateField *field) 2260 { 2261 struct endp_data *endp = priv; 2262 USBRedirDevice *dev = endp->dev; 2263 struct buf_packet *bufp; 2264 int i; 2265 2266 endp->bufpq_size = qemu_get_be32(f); 2267 for (i = 0; i < endp->bufpq_size; i++) { 2268 bufp = g_new(struct buf_packet, 1); 2269 bufp->len = qemu_get_be32(f); 2270 bufp->status = qemu_get_be32(f); 2271 bufp->offset = 0; 2272 bufp->data = qemu_oom_check(malloc(bufp->len)); /* regular malloc! */ 2273 bufp->free_on_destroy = bufp->data; 2274 qemu_get_buffer(f, bufp->data, bufp->len); 2275 QTAILQ_INSERT_TAIL(&endp->bufpq, bufp, next); 2276 DPRINTF("get_bufpq %d/%d len %d status %d\n", i + 1, endp->bufpq_size, 2277 bufp->len, bufp->status); 2278 } 2279 return 0; 2280 } 2281 2282 static const VMStateInfo usbredir_ep_bufpq_vmstate_info = { 2283 .name = "usb-redir-bufpq", 2284 .put = usbredir_put_bufpq, 2285 .get = usbredir_get_bufpq, 2286 }; 2287 2288 2289 /* For endp_data migration */ 2290 static bool usbredir_bulk_receiving_needed(void *priv) 2291 { 2292 struct endp_data *endp = priv; 2293 2294 return endp->bulk_receiving_started; 2295 } 2296 2297 static const VMStateDescription usbredir_bulk_receiving_vmstate = { 2298 .name = "usb-redir-ep/bulk-receiving", 2299 .version_id = 1, 2300 .minimum_version_id = 1, 2301 .needed = usbredir_bulk_receiving_needed, 2302 .fields = (VMStateField[]) { 2303 VMSTATE_UINT8(bulk_receiving_started, struct endp_data), 2304 VMSTATE_END_OF_LIST() 2305 } 2306 }; 2307 2308 static bool usbredir_stream_needed(void *priv) 2309 { 2310 struct endp_data *endp = priv; 2311 2312 return endp->max_streams; 2313 } 2314 2315 static const VMStateDescription usbredir_stream_vmstate = { 2316 .name = "usb-redir-ep/stream-state", 2317 .version_id = 1, 2318 .minimum_version_id = 1, 2319 .needed = usbredir_stream_needed, 2320 .fields = (VMStateField[]) { 2321 VMSTATE_UINT32(max_streams, struct endp_data), 2322 VMSTATE_END_OF_LIST() 2323 } 2324 }; 2325 2326 static const VMStateDescription usbredir_ep_vmstate = { 2327 .name = "usb-redir-ep", 2328 .version_id = 1, 2329 .minimum_version_id = 1, 2330 .fields = (VMStateField[]) { 2331 VMSTATE_UINT8(type, struct endp_data), 2332 VMSTATE_UINT8(interval, struct endp_data), 2333 VMSTATE_UINT8(interface, struct endp_data), 2334 VMSTATE_UINT16(max_packet_size, struct endp_data), 2335 VMSTATE_UINT8(iso_started, struct endp_data), 2336 VMSTATE_UINT8(iso_error, struct endp_data), 2337 VMSTATE_UINT8(interrupt_started, struct endp_data), 2338 VMSTATE_UINT8(interrupt_error, struct endp_data), 2339 VMSTATE_UINT8(bufpq_prefilled, struct endp_data), 2340 VMSTATE_UINT8(bufpq_dropping_packets, struct endp_data), 2341 { 2342 .name = "bufpq", 2343 .version_id = 0, 2344 .field_exists = NULL, 2345 .size = 0, 2346 .info = &usbredir_ep_bufpq_vmstate_info, 2347 .flags = VMS_SINGLE, 2348 .offset = 0, 2349 }, 2350 VMSTATE_INT32(bufpq_target_size, struct endp_data), 2351 VMSTATE_END_OF_LIST() 2352 }, 2353 .subsections = (const VMStateDescription*[]) { 2354 &usbredir_bulk_receiving_vmstate, 2355 &usbredir_stream_vmstate, 2356 NULL 2357 } 2358 }; 2359 2360 2361 /* For PacketIdQueue migration */ 2362 static int usbredir_put_packet_id_q(QEMUFile *f, void *priv, size_t unused, 2363 VMStateField *field, QJSON *vmdesc) 2364 { 2365 struct PacketIdQueue *q = priv; 2366 USBRedirDevice *dev = q->dev; 2367 struct PacketIdQueueEntry *e; 2368 int remain = q->size; 2369 2370 DPRINTF("put_packet_id_q %s size %d\n", q->name, q->size); 2371 qemu_put_be32(f, q->size); 2372 QTAILQ_FOREACH(e, &q->head, next) { 2373 qemu_put_be64(f, e->id); 2374 remain--; 2375 } 2376 assert(remain == 0); 2377 2378 return 0; 2379 } 2380 2381 static int usbredir_get_packet_id_q(QEMUFile *f, void *priv, size_t unused, 2382 VMStateField *field) 2383 { 2384 struct PacketIdQueue *q = priv; 2385 USBRedirDevice *dev = q->dev; 2386 int i, size; 2387 uint64_t id; 2388 2389 size = qemu_get_be32(f); 2390 DPRINTF("get_packet_id_q %s size %d\n", q->name, size); 2391 for (i = 0; i < size; i++) { 2392 id = qemu_get_be64(f); 2393 packet_id_queue_add(q, id); 2394 } 2395 assert(q->size == size); 2396 return 0; 2397 } 2398 2399 static const VMStateInfo usbredir_ep_packet_id_q_vmstate_info = { 2400 .name = "usb-redir-packet-id-q", 2401 .put = usbredir_put_packet_id_q, 2402 .get = usbredir_get_packet_id_q, 2403 }; 2404 2405 static const VMStateDescription usbredir_ep_packet_id_queue_vmstate = { 2406 .name = "usb-redir-packet-id-queue", 2407 .version_id = 1, 2408 .minimum_version_id = 1, 2409 .fields = (VMStateField[]) { 2410 { 2411 .name = "queue", 2412 .version_id = 0, 2413 .field_exists = NULL, 2414 .size = 0, 2415 .info = &usbredir_ep_packet_id_q_vmstate_info, 2416 .flags = VMS_SINGLE, 2417 .offset = 0, 2418 }, 2419 VMSTATE_END_OF_LIST() 2420 } 2421 }; 2422 2423 2424 /* For usb_redir_device_connect_header migration */ 2425 static const VMStateDescription usbredir_device_info_vmstate = { 2426 .name = "usb-redir-device-info", 2427 .version_id = 1, 2428 .minimum_version_id = 1, 2429 .fields = (VMStateField[]) { 2430 VMSTATE_UINT8(speed, struct usb_redir_device_connect_header), 2431 VMSTATE_UINT8(device_class, struct usb_redir_device_connect_header), 2432 VMSTATE_UINT8(device_subclass, struct usb_redir_device_connect_header), 2433 VMSTATE_UINT8(device_protocol, struct usb_redir_device_connect_header), 2434 VMSTATE_UINT16(vendor_id, struct usb_redir_device_connect_header), 2435 VMSTATE_UINT16(product_id, struct usb_redir_device_connect_header), 2436 VMSTATE_UINT16(device_version_bcd, 2437 struct usb_redir_device_connect_header), 2438 VMSTATE_END_OF_LIST() 2439 } 2440 }; 2441 2442 2443 /* For usb_redir_interface_info_header migration */ 2444 static const VMStateDescription usbredir_interface_info_vmstate = { 2445 .name = "usb-redir-interface-info", 2446 .version_id = 1, 2447 .minimum_version_id = 1, 2448 .fields = (VMStateField[]) { 2449 VMSTATE_UINT32(interface_count, 2450 struct usb_redir_interface_info_header), 2451 VMSTATE_UINT8_ARRAY(interface, 2452 struct usb_redir_interface_info_header, 32), 2453 VMSTATE_UINT8_ARRAY(interface_class, 2454 struct usb_redir_interface_info_header, 32), 2455 VMSTATE_UINT8_ARRAY(interface_subclass, 2456 struct usb_redir_interface_info_header, 32), 2457 VMSTATE_UINT8_ARRAY(interface_protocol, 2458 struct usb_redir_interface_info_header, 32), 2459 VMSTATE_END_OF_LIST() 2460 } 2461 }; 2462 2463 2464 /* And finally the USBRedirDevice vmstate itself */ 2465 static const VMStateDescription usbredir_vmstate = { 2466 .name = "usb-redir", 2467 .version_id = 1, 2468 .minimum_version_id = 1, 2469 .pre_save = usbredir_pre_save, 2470 .post_load = usbredir_post_load, 2471 .fields = (VMStateField[]) { 2472 VMSTATE_USB_DEVICE(dev, USBRedirDevice), 2473 VMSTATE_TIMER_PTR(attach_timer, USBRedirDevice), 2474 { 2475 .name = "parser", 2476 .version_id = 0, 2477 .field_exists = NULL, 2478 .size = 0, 2479 .info = &usbredir_parser_vmstate_info, 2480 .flags = VMS_SINGLE, 2481 .offset = 0, 2482 }, 2483 VMSTATE_STRUCT_ARRAY(endpoint, USBRedirDevice, MAX_ENDPOINTS, 1, 2484 usbredir_ep_vmstate, struct endp_data), 2485 VMSTATE_STRUCT(cancelled, USBRedirDevice, 1, 2486 usbredir_ep_packet_id_queue_vmstate, 2487 struct PacketIdQueue), 2488 VMSTATE_STRUCT(already_in_flight, USBRedirDevice, 1, 2489 usbredir_ep_packet_id_queue_vmstate, 2490 struct PacketIdQueue), 2491 VMSTATE_STRUCT(device_info, USBRedirDevice, 1, 2492 usbredir_device_info_vmstate, 2493 struct usb_redir_device_connect_header), 2494 VMSTATE_STRUCT(interface_info, USBRedirDevice, 1, 2495 usbredir_interface_info_vmstate, 2496 struct usb_redir_interface_info_header), 2497 VMSTATE_END_OF_LIST() 2498 } 2499 }; 2500 2501 static Property usbredir_properties[] = { 2502 DEFINE_PROP_CHR("chardev", USBRedirDevice, cs), 2503 DEFINE_PROP_UINT8("debug", USBRedirDevice, debug, usbredirparser_warning), 2504 DEFINE_PROP_STRING("filter", USBRedirDevice, filter_str), 2505 DEFINE_PROP_BOOL("streams", USBRedirDevice, enable_streams, true), 2506 DEFINE_PROP_END_OF_LIST(), 2507 }; 2508 2509 static void usbredir_class_initfn(ObjectClass *klass, void *data) 2510 { 2511 USBDeviceClass *uc = USB_DEVICE_CLASS(klass); 2512 DeviceClass *dc = DEVICE_CLASS(klass); 2513 2514 uc->realize = usbredir_realize; 2515 uc->product_desc = "USB Redirection Device"; 2516 uc->unrealize = usbredir_unrealize; 2517 uc->cancel_packet = usbredir_cancel_packet; 2518 uc->handle_reset = usbredir_handle_reset; 2519 uc->handle_data = usbredir_handle_data; 2520 uc->handle_control = usbredir_handle_control; 2521 uc->flush_ep_queue = usbredir_flush_ep_queue; 2522 uc->ep_stopped = usbredir_ep_stopped; 2523 uc->alloc_streams = usbredir_alloc_streams; 2524 uc->free_streams = usbredir_free_streams; 2525 dc->vmsd = &usbredir_vmstate; 2526 dc->props = usbredir_properties; 2527 set_bit(DEVICE_CATEGORY_MISC, dc->categories); 2528 } 2529 2530 static void usbredir_instance_init(Object *obj) 2531 { 2532 USBDevice *udev = USB_DEVICE(obj); 2533 USBRedirDevice *dev = USB_REDIRECT(udev); 2534 2535 device_add_bootindex_property(obj, &dev->bootindex, 2536 "bootindex", NULL, 2537 &udev->qdev, NULL); 2538 } 2539 2540 static const TypeInfo usbredir_dev_info = { 2541 .name = TYPE_USB_REDIR, 2542 .parent = TYPE_USB_DEVICE, 2543 .instance_size = sizeof(USBRedirDevice), 2544 .class_init = usbredir_class_initfn, 2545 .instance_init = usbredir_instance_init, 2546 }; 2547 2548 static void usbredir_register_types(void) 2549 { 2550 type_register_static(&usbredir_dev_info); 2551 } 2552 2553 type_init(usbredir_register_types) 2554