1 /* 2 * USB redirector usb-guest 3 * 4 * Copyright (c) 2011-2012 Red Hat, Inc. 5 * 6 * Red Hat Authors: 7 * Hans de Goede <hdegoede@redhat.com> 8 * 9 * Permission is hereby granted, free of charge, to any person obtaining a copy 10 * of this software and associated documentation files (the "Software"), to deal 11 * in the Software without restriction, including without limitation the rights 12 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 13 * copies of the Software, and to permit persons to whom the Software is 14 * furnished to do so, subject to the following conditions: 15 * 16 * The above copyright notice and this permission notice shall be included in 17 * all copies or substantial portions of the Software. 18 * 19 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 20 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 21 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 22 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 23 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 24 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 25 * THE SOFTWARE. 26 */ 27 28 #include "qemu-common.h" 29 #include "qemu/timer.h" 30 #include "monitor/monitor.h" 31 #include "sysemu/sysemu.h" 32 #include "qemu/iov.h" 33 #include "sysemu/char.h" 34 35 #include <dirent.h> 36 #include <sys/ioctl.h> 37 #include <signal.h> 38 #include <usbredirparser.h> 39 #include <usbredirfilter.h> 40 41 #include "hw/usb.h" 42 43 #define MAX_ENDPOINTS 32 44 #define NO_INTERFACE_INFO 255 /* Valid interface_count always <= 32 */ 45 #define EP2I(ep_address) (((ep_address & 0x80) >> 3) | (ep_address & 0x0f)) 46 #define I2EP(i) (((i & 0x10) << 3) | (i & 0x0f)) 47 #define USBEP2I(usb_ep) (((usb_ep)->pid == USB_TOKEN_IN) ? \ 48 ((usb_ep)->nr | 0x10) : ((usb_ep)->nr)) 49 #define I2USBEP(d, i) (usb_ep_get(&(d)->dev, \ 50 ((i) & 0x10) ? USB_TOKEN_IN : USB_TOKEN_OUT, \ 51 (i) & 0x0f)) 52 53 typedef struct USBRedirDevice USBRedirDevice; 54 55 /* Struct to hold buffered packets */ 56 struct buf_packet { 57 uint8_t *data; 58 void *free_on_destroy; 59 uint16_t len; 60 uint16_t offset; 61 uint8_t status; 62 QTAILQ_ENTRY(buf_packet)next; 63 }; 64 65 struct endp_data { 66 USBRedirDevice *dev; 67 uint8_t type; 68 uint8_t interval; 69 uint8_t interface; /* bInterfaceNumber this ep belongs to */ 70 uint16_t max_packet_size; /* In bytes, not wMaxPacketSize format !! */ 71 uint8_t iso_started; 72 uint8_t iso_error; /* For reporting iso errors to the HC */ 73 uint8_t interrupt_started; 74 uint8_t interrupt_error; 75 uint8_t bulk_receiving_enabled; 76 uint8_t bulk_receiving_started; 77 uint8_t bufpq_prefilled; 78 uint8_t bufpq_dropping_packets; 79 QTAILQ_HEAD(, buf_packet) bufpq; 80 int32_t bufpq_size; 81 int32_t bufpq_target_size; 82 USBPacket *pending_async_packet; 83 }; 84 85 struct PacketIdQueueEntry { 86 uint64_t id; 87 QTAILQ_ENTRY(PacketIdQueueEntry)next; 88 }; 89 90 struct PacketIdQueue { 91 USBRedirDevice *dev; 92 const char *name; 93 QTAILQ_HEAD(, PacketIdQueueEntry) head; 94 int size; 95 }; 96 97 struct USBRedirDevice { 98 USBDevice dev; 99 /* Properties */ 100 CharDriverState *cs; 101 uint8_t debug; 102 char *filter_str; 103 int32_t bootindex; 104 /* Data passed from chardev the fd_read cb to the usbredirparser read cb */ 105 const uint8_t *read_buf; 106 int read_buf_size; 107 /* Active chardev-watch-tag */ 108 guint watch; 109 /* For async handling of close */ 110 QEMUBH *chardev_close_bh; 111 /* To delay the usb attach in case of quick chardev close + open */ 112 QEMUTimer *attach_timer; 113 int64_t next_attach_time; 114 struct usbredirparser *parser; 115 struct endp_data endpoint[MAX_ENDPOINTS]; 116 struct PacketIdQueue cancelled; 117 struct PacketIdQueue already_in_flight; 118 void (*buffered_bulk_in_complete)(USBRedirDevice *, USBPacket *, uint8_t); 119 /* Data for device filtering */ 120 struct usb_redir_device_connect_header device_info; 121 struct usb_redir_interface_info_header interface_info; 122 struct usbredirfilter_rule *filter_rules; 123 int filter_rules_count; 124 int compatible_speedmask; 125 }; 126 127 static void usbredir_hello(void *priv, struct usb_redir_hello_header *h); 128 static void usbredir_device_connect(void *priv, 129 struct usb_redir_device_connect_header *device_connect); 130 static void usbredir_device_disconnect(void *priv); 131 static void usbredir_interface_info(void *priv, 132 struct usb_redir_interface_info_header *interface_info); 133 static void usbredir_ep_info(void *priv, 134 struct usb_redir_ep_info_header *ep_info); 135 static void usbredir_configuration_status(void *priv, uint64_t id, 136 struct usb_redir_configuration_status_header *configuration_status); 137 static void usbredir_alt_setting_status(void *priv, uint64_t id, 138 struct usb_redir_alt_setting_status_header *alt_setting_status); 139 static void usbredir_iso_stream_status(void *priv, uint64_t id, 140 struct usb_redir_iso_stream_status_header *iso_stream_status); 141 static void usbredir_interrupt_receiving_status(void *priv, uint64_t id, 142 struct usb_redir_interrupt_receiving_status_header 143 *interrupt_receiving_status); 144 static void usbredir_bulk_streams_status(void *priv, uint64_t id, 145 struct usb_redir_bulk_streams_status_header *bulk_streams_status); 146 static void usbredir_bulk_receiving_status(void *priv, uint64_t id, 147 struct usb_redir_bulk_receiving_status_header *bulk_receiving_status); 148 static void usbredir_control_packet(void *priv, uint64_t id, 149 struct usb_redir_control_packet_header *control_packet, 150 uint8_t *data, int data_len); 151 static void usbredir_bulk_packet(void *priv, uint64_t id, 152 struct usb_redir_bulk_packet_header *bulk_packet, 153 uint8_t *data, int data_len); 154 static void usbredir_iso_packet(void *priv, uint64_t id, 155 struct usb_redir_iso_packet_header *iso_packet, 156 uint8_t *data, int data_len); 157 static void usbredir_interrupt_packet(void *priv, uint64_t id, 158 struct usb_redir_interrupt_packet_header *interrupt_header, 159 uint8_t *data, int data_len); 160 static void usbredir_buffered_bulk_packet(void *priv, uint64_t id, 161 struct usb_redir_buffered_bulk_packet_header *buffered_bulk_packet, 162 uint8_t *data, int data_len); 163 164 static void usbredir_handle_status(USBRedirDevice *dev, USBPacket *p, 165 int status); 166 167 #define VERSION "qemu usb-redir guest " QEMU_VERSION 168 169 /* 170 * Logging stuff 171 */ 172 173 #define ERROR(...) \ 174 do { \ 175 if (dev->debug >= usbredirparser_error) { \ 176 error_report("usb-redir error: " __VA_ARGS__); \ 177 } \ 178 } while (0) 179 #define WARNING(...) \ 180 do { \ 181 if (dev->debug >= usbredirparser_warning) { \ 182 error_report("usb-redir warning: " __VA_ARGS__); \ 183 } \ 184 } while (0) 185 #define INFO(...) \ 186 do { \ 187 if (dev->debug >= usbredirparser_info) { \ 188 error_report("usb-redir: " __VA_ARGS__); \ 189 } \ 190 } while (0) 191 #define DPRINTF(...) \ 192 do { \ 193 if (dev->debug >= usbredirparser_debug) { \ 194 error_report("usb-redir: " __VA_ARGS__); \ 195 } \ 196 } while (0) 197 #define DPRINTF2(...) \ 198 do { \ 199 if (dev->debug >= usbredirparser_debug_data) { \ 200 error_report("usb-redir: " __VA_ARGS__); \ 201 } \ 202 } while (0) 203 204 static void usbredir_log(void *priv, int level, const char *msg) 205 { 206 USBRedirDevice *dev = priv; 207 208 if (dev->debug < level) { 209 return; 210 } 211 212 error_report("%s", msg); 213 } 214 215 static void usbredir_log_data(USBRedirDevice *dev, const char *desc, 216 const uint8_t *data, int len) 217 { 218 int i, j, n; 219 220 if (dev->debug < usbredirparser_debug_data) { 221 return; 222 } 223 224 for (i = 0; i < len; i += j) { 225 char buf[128]; 226 227 n = sprintf(buf, "%s", desc); 228 for (j = 0; j < 8 && i + j < len; j++) { 229 n += sprintf(buf + n, " %02X", data[i + j]); 230 } 231 error_report("%s", buf); 232 } 233 } 234 235 /* 236 * usbredirparser io functions 237 */ 238 239 static int usbredir_read(void *priv, uint8_t *data, int count) 240 { 241 USBRedirDevice *dev = priv; 242 243 if (dev->read_buf_size < count) { 244 count = dev->read_buf_size; 245 } 246 247 memcpy(data, dev->read_buf, count); 248 249 dev->read_buf_size -= count; 250 if (dev->read_buf_size) { 251 dev->read_buf += count; 252 } else { 253 dev->read_buf = NULL; 254 } 255 256 return count; 257 } 258 259 static gboolean usbredir_write_unblocked(GIOChannel *chan, GIOCondition cond, 260 void *opaque) 261 { 262 USBRedirDevice *dev = opaque; 263 264 dev->watch = 0; 265 usbredirparser_do_write(dev->parser); 266 267 return FALSE; 268 } 269 270 static int usbredir_write(void *priv, uint8_t *data, int count) 271 { 272 USBRedirDevice *dev = priv; 273 int r; 274 275 if (!dev->cs->be_open) { 276 return 0; 277 } 278 279 /* Don't send new data to the chardev until our state is fully synced */ 280 if (!runstate_check(RUN_STATE_RUNNING)) { 281 return 0; 282 } 283 284 r = qemu_chr_fe_write(dev->cs, data, count); 285 if (r < count) { 286 if (!dev->watch) { 287 dev->watch = qemu_chr_fe_add_watch(dev->cs, G_IO_OUT, 288 usbredir_write_unblocked, dev); 289 } 290 if (r < 0) { 291 r = 0; 292 } 293 } 294 return r; 295 } 296 297 /* 298 * Cancelled and buffered packets helpers 299 */ 300 301 static void packet_id_queue_init(struct PacketIdQueue *q, 302 USBRedirDevice *dev, const char *name) 303 { 304 q->dev = dev; 305 q->name = name; 306 QTAILQ_INIT(&q->head); 307 q->size = 0; 308 } 309 310 static void packet_id_queue_add(struct PacketIdQueue *q, uint64_t id) 311 { 312 USBRedirDevice *dev = q->dev; 313 struct PacketIdQueueEntry *e; 314 315 DPRINTF("adding packet id %"PRIu64" to %s queue\n", id, q->name); 316 317 e = g_malloc0(sizeof(struct PacketIdQueueEntry)); 318 e->id = id; 319 QTAILQ_INSERT_TAIL(&q->head, e, next); 320 q->size++; 321 } 322 323 static int packet_id_queue_remove(struct PacketIdQueue *q, uint64_t id) 324 { 325 USBRedirDevice *dev = q->dev; 326 struct PacketIdQueueEntry *e; 327 328 QTAILQ_FOREACH(e, &q->head, next) { 329 if (e->id == id) { 330 DPRINTF("removing packet id %"PRIu64" from %s queue\n", 331 id, q->name); 332 QTAILQ_REMOVE(&q->head, e, next); 333 q->size--; 334 g_free(e); 335 return 1; 336 } 337 } 338 return 0; 339 } 340 341 static void packet_id_queue_empty(struct PacketIdQueue *q) 342 { 343 USBRedirDevice *dev = q->dev; 344 struct PacketIdQueueEntry *e, *next_e; 345 346 DPRINTF("removing %d packet-ids from %s queue\n", q->size, q->name); 347 348 QTAILQ_FOREACH_SAFE(e, &q->head, next, next_e) { 349 QTAILQ_REMOVE(&q->head, e, next); 350 g_free(e); 351 } 352 q->size = 0; 353 } 354 355 static void usbredir_cancel_packet(USBDevice *udev, USBPacket *p) 356 { 357 USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev); 358 int i = USBEP2I(p->ep); 359 360 if (p->combined) { 361 usb_combined_packet_cancel(udev, p); 362 return; 363 } 364 365 if (dev->endpoint[i].pending_async_packet) { 366 assert(dev->endpoint[i].pending_async_packet == p); 367 dev->endpoint[i].pending_async_packet = NULL; 368 return; 369 } 370 371 packet_id_queue_add(&dev->cancelled, p->id); 372 usbredirparser_send_cancel_data_packet(dev->parser, p->id); 373 usbredirparser_do_write(dev->parser); 374 } 375 376 static int usbredir_is_cancelled(USBRedirDevice *dev, uint64_t id) 377 { 378 if (!dev->dev.attached) { 379 return 1; /* Treat everything as cancelled after a disconnect */ 380 } 381 return packet_id_queue_remove(&dev->cancelled, id); 382 } 383 384 static void usbredir_fill_already_in_flight_from_ep(USBRedirDevice *dev, 385 struct USBEndpoint *ep) 386 { 387 static USBPacket *p; 388 389 /* async handled packets for bulk receiving eps do not count as inflight */ 390 if (dev->endpoint[USBEP2I(ep)].bulk_receiving_started) { 391 return; 392 } 393 394 QTAILQ_FOREACH(p, &ep->queue, queue) { 395 /* Skip combined packets, except for the first */ 396 if (p->combined && p != p->combined->first) { 397 continue; 398 } 399 if (p->state == USB_PACKET_ASYNC) { 400 packet_id_queue_add(&dev->already_in_flight, p->id); 401 } 402 } 403 } 404 405 static void usbredir_fill_already_in_flight(USBRedirDevice *dev) 406 { 407 int ep; 408 struct USBDevice *udev = &dev->dev; 409 410 usbredir_fill_already_in_flight_from_ep(dev, &udev->ep_ctl); 411 412 for (ep = 0; ep < USB_MAX_ENDPOINTS; ep++) { 413 usbredir_fill_already_in_flight_from_ep(dev, &udev->ep_in[ep]); 414 usbredir_fill_already_in_flight_from_ep(dev, &udev->ep_out[ep]); 415 } 416 } 417 418 static int usbredir_already_in_flight(USBRedirDevice *dev, uint64_t id) 419 { 420 return packet_id_queue_remove(&dev->already_in_flight, id); 421 } 422 423 static USBPacket *usbredir_find_packet_by_id(USBRedirDevice *dev, 424 uint8_t ep, uint64_t id) 425 { 426 USBPacket *p; 427 428 if (usbredir_is_cancelled(dev, id)) { 429 return NULL; 430 } 431 432 p = usb_ep_find_packet_by_id(&dev->dev, 433 (ep & USB_DIR_IN) ? USB_TOKEN_IN : USB_TOKEN_OUT, 434 ep & 0x0f, id); 435 if (p == NULL) { 436 ERROR("could not find packet with id %"PRIu64"\n", id); 437 } 438 return p; 439 } 440 441 static void bufp_alloc(USBRedirDevice *dev, uint8_t *data, uint16_t len, 442 uint8_t status, uint8_t ep, void *free_on_destroy) 443 { 444 struct buf_packet *bufp; 445 446 if (!dev->endpoint[EP2I(ep)].bufpq_dropping_packets && 447 dev->endpoint[EP2I(ep)].bufpq_size > 448 2 * dev->endpoint[EP2I(ep)].bufpq_target_size) { 449 DPRINTF("bufpq overflow, dropping packets ep %02X\n", ep); 450 dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 1; 451 } 452 /* Since we're interupting the stream anyways, drop enough packets to get 453 back to our target buffer size */ 454 if (dev->endpoint[EP2I(ep)].bufpq_dropping_packets) { 455 if (dev->endpoint[EP2I(ep)].bufpq_size > 456 dev->endpoint[EP2I(ep)].bufpq_target_size) { 457 free(data); 458 return; 459 } 460 dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0; 461 } 462 463 bufp = g_malloc(sizeof(struct buf_packet)); 464 bufp->data = data; 465 bufp->len = len; 466 bufp->offset = 0; 467 bufp->status = status; 468 bufp->free_on_destroy = free_on_destroy; 469 QTAILQ_INSERT_TAIL(&dev->endpoint[EP2I(ep)].bufpq, bufp, next); 470 dev->endpoint[EP2I(ep)].bufpq_size++; 471 } 472 473 static void bufp_free(USBRedirDevice *dev, struct buf_packet *bufp, 474 uint8_t ep) 475 { 476 QTAILQ_REMOVE(&dev->endpoint[EP2I(ep)].bufpq, bufp, next); 477 dev->endpoint[EP2I(ep)].bufpq_size--; 478 free(bufp->free_on_destroy); 479 g_free(bufp); 480 } 481 482 static void usbredir_free_bufpq(USBRedirDevice *dev, uint8_t ep) 483 { 484 struct buf_packet *buf, *buf_next; 485 486 QTAILQ_FOREACH_SAFE(buf, &dev->endpoint[EP2I(ep)].bufpq, next, buf_next) { 487 bufp_free(dev, buf, ep); 488 } 489 } 490 491 /* 492 * USBDevice callbacks 493 */ 494 495 static void usbredir_handle_reset(USBDevice *udev) 496 { 497 USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev); 498 499 DPRINTF("reset device\n"); 500 usbredirparser_send_reset(dev->parser); 501 usbredirparser_do_write(dev->parser); 502 } 503 504 static void usbredir_handle_iso_data(USBRedirDevice *dev, USBPacket *p, 505 uint8_t ep) 506 { 507 int status, len; 508 if (!dev->endpoint[EP2I(ep)].iso_started && 509 !dev->endpoint[EP2I(ep)].iso_error) { 510 struct usb_redir_start_iso_stream_header start_iso = { 511 .endpoint = ep, 512 }; 513 int pkts_per_sec; 514 515 if (dev->dev.speed == USB_SPEED_HIGH) { 516 pkts_per_sec = 8000 / dev->endpoint[EP2I(ep)].interval; 517 } else { 518 pkts_per_sec = 1000 / dev->endpoint[EP2I(ep)].interval; 519 } 520 /* Testing has shown that we need circa 60 ms buffer */ 521 dev->endpoint[EP2I(ep)].bufpq_target_size = (pkts_per_sec * 60) / 1000; 522 523 /* Aim for approx 100 interrupts / second on the client to 524 balance latency and interrupt load */ 525 start_iso.pkts_per_urb = pkts_per_sec / 100; 526 if (start_iso.pkts_per_urb < 1) { 527 start_iso.pkts_per_urb = 1; 528 } else if (start_iso.pkts_per_urb > 32) { 529 start_iso.pkts_per_urb = 32; 530 } 531 532 start_iso.no_urbs = (dev->endpoint[EP2I(ep)].bufpq_target_size + 533 start_iso.pkts_per_urb - 1) / 534 start_iso.pkts_per_urb; 535 /* Output endpoints pre-fill only 1/2 of the packets, keeping the rest 536 as overflow buffer. Also see the usbredir protocol documentation */ 537 if (!(ep & USB_DIR_IN)) { 538 start_iso.no_urbs *= 2; 539 } 540 if (start_iso.no_urbs > 16) { 541 start_iso.no_urbs = 16; 542 } 543 544 /* No id, we look at the ep when receiving a status back */ 545 usbredirparser_send_start_iso_stream(dev->parser, 0, &start_iso); 546 usbredirparser_do_write(dev->parser); 547 DPRINTF("iso stream started pkts/sec %d pkts/urb %d urbs %d ep %02X\n", 548 pkts_per_sec, start_iso.pkts_per_urb, start_iso.no_urbs, ep); 549 dev->endpoint[EP2I(ep)].iso_started = 1; 550 dev->endpoint[EP2I(ep)].bufpq_prefilled = 0; 551 dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0; 552 } 553 554 if (ep & USB_DIR_IN) { 555 struct buf_packet *isop; 556 557 if (dev->endpoint[EP2I(ep)].iso_started && 558 !dev->endpoint[EP2I(ep)].bufpq_prefilled) { 559 if (dev->endpoint[EP2I(ep)].bufpq_size < 560 dev->endpoint[EP2I(ep)].bufpq_target_size) { 561 return; 562 } 563 dev->endpoint[EP2I(ep)].bufpq_prefilled = 1; 564 } 565 566 isop = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq); 567 if (isop == NULL) { 568 DPRINTF("iso-token-in ep %02X, no isop, iso_error: %d\n", 569 ep, dev->endpoint[EP2I(ep)].iso_error); 570 /* Re-fill the buffer */ 571 dev->endpoint[EP2I(ep)].bufpq_prefilled = 0; 572 /* Check iso_error for stream errors, otherwise its an underrun */ 573 status = dev->endpoint[EP2I(ep)].iso_error; 574 dev->endpoint[EP2I(ep)].iso_error = 0; 575 p->status = status ? USB_RET_IOERROR : USB_RET_SUCCESS; 576 return; 577 } 578 DPRINTF2("iso-token-in ep %02X status %d len %d queue-size: %d\n", ep, 579 isop->status, isop->len, dev->endpoint[EP2I(ep)].bufpq_size); 580 581 status = isop->status; 582 len = isop->len; 583 if (len > p->iov.size) { 584 ERROR("received iso data is larger then packet ep %02X (%d > %d)\n", 585 ep, len, (int)p->iov.size); 586 len = p->iov.size; 587 status = usb_redir_babble; 588 } 589 usb_packet_copy(p, isop->data, len); 590 bufp_free(dev, isop, ep); 591 usbredir_handle_status(dev, p, status); 592 } else { 593 /* If the stream was not started because of a pending error don't 594 send the packet to the usb-host */ 595 if (dev->endpoint[EP2I(ep)].iso_started) { 596 struct usb_redir_iso_packet_header iso_packet = { 597 .endpoint = ep, 598 .length = p->iov.size 599 }; 600 uint8_t buf[p->iov.size]; 601 /* No id, we look at the ep when receiving a status back */ 602 usb_packet_copy(p, buf, p->iov.size); 603 usbredirparser_send_iso_packet(dev->parser, 0, &iso_packet, 604 buf, p->iov.size); 605 usbredirparser_do_write(dev->parser); 606 } 607 status = dev->endpoint[EP2I(ep)].iso_error; 608 dev->endpoint[EP2I(ep)].iso_error = 0; 609 DPRINTF2("iso-token-out ep %02X status %d len %zd\n", ep, status, 610 p->iov.size); 611 usbredir_handle_status(dev, p, status); 612 } 613 } 614 615 static void usbredir_stop_iso_stream(USBRedirDevice *dev, uint8_t ep) 616 { 617 struct usb_redir_stop_iso_stream_header stop_iso_stream = { 618 .endpoint = ep 619 }; 620 if (dev->endpoint[EP2I(ep)].iso_started) { 621 usbredirparser_send_stop_iso_stream(dev->parser, 0, &stop_iso_stream); 622 DPRINTF("iso stream stopped ep %02X\n", ep); 623 dev->endpoint[EP2I(ep)].iso_started = 0; 624 } 625 dev->endpoint[EP2I(ep)].iso_error = 0; 626 usbredir_free_bufpq(dev, ep); 627 } 628 629 /* 630 * The usb-host may poll the endpoint faster then our guest, resulting in lots 631 * of smaller bulkp-s. The below buffered_bulk_in_complete* functions combine 632 * data from multiple bulkp-s into a single packet, avoiding bufpq overflows. 633 */ 634 static void usbredir_buffered_bulk_add_data_to_packet(USBRedirDevice *dev, 635 struct buf_packet *bulkp, int count, USBPacket *p, uint8_t ep) 636 { 637 usb_packet_copy(p, bulkp->data + bulkp->offset, count); 638 bulkp->offset += count; 639 if (bulkp->offset == bulkp->len) { 640 /* Store status in the last packet with data from this bulkp */ 641 usbredir_handle_status(dev, p, bulkp->status); 642 bufp_free(dev, bulkp, ep); 643 } 644 } 645 646 static void usbredir_buffered_bulk_in_complete_raw(USBRedirDevice *dev, 647 USBPacket *p, uint8_t ep) 648 { 649 struct buf_packet *bulkp; 650 int count; 651 652 while ((bulkp = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq)) && 653 p->actual_length < p->iov.size && p->status == USB_RET_SUCCESS) { 654 count = bulkp->len - bulkp->offset; 655 if (count > (p->iov.size - p->actual_length)) { 656 count = p->iov.size - p->actual_length; 657 } 658 usbredir_buffered_bulk_add_data_to_packet(dev, bulkp, count, p, ep); 659 } 660 } 661 662 static void usbredir_buffered_bulk_in_complete_ftdi(USBRedirDevice *dev, 663 USBPacket *p, uint8_t ep) 664 { 665 const int maxp = dev->endpoint[EP2I(ep)].max_packet_size; 666 uint8_t header[2] = { 0, 0 }; 667 struct buf_packet *bulkp; 668 int count; 669 670 while ((bulkp = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq)) && 671 p->actual_length < p->iov.size && p->status == USB_RET_SUCCESS) { 672 if (bulkp->len < 2) { 673 WARNING("malformed ftdi bulk in packet\n"); 674 bufp_free(dev, bulkp, ep); 675 continue; 676 } 677 678 if ((p->actual_length % maxp) == 0) { 679 usb_packet_copy(p, bulkp->data, 2); 680 memcpy(header, bulkp->data, 2); 681 } else { 682 if (bulkp->data[0] != header[0] || bulkp->data[1] != header[1]) { 683 break; /* Different header, add to next packet */ 684 } 685 } 686 687 if (bulkp->offset == 0) { 688 bulkp->offset = 2; /* Skip header */ 689 } 690 count = bulkp->len - bulkp->offset; 691 /* Must repeat the header at maxp interval */ 692 if (count > (maxp - (p->actual_length % maxp))) { 693 count = maxp - (p->actual_length % maxp); 694 } 695 usbredir_buffered_bulk_add_data_to_packet(dev, bulkp, count, p, ep); 696 } 697 } 698 699 static void usbredir_buffered_bulk_in_complete(USBRedirDevice *dev, 700 USBPacket *p, uint8_t ep) 701 { 702 p->status = USB_RET_SUCCESS; /* Clear previous ASYNC status */ 703 dev->buffered_bulk_in_complete(dev, p, ep); 704 DPRINTF("bulk-token-in ep %02X status %d len %d id %"PRIu64"\n", 705 ep, p->status, p->actual_length, p->id); 706 } 707 708 static void usbredir_handle_buffered_bulk_in_data(USBRedirDevice *dev, 709 USBPacket *p, uint8_t ep) 710 { 711 /* Input bulk endpoint, buffered packet input */ 712 if (!dev->endpoint[EP2I(ep)].bulk_receiving_started) { 713 int bpt; 714 struct usb_redir_start_bulk_receiving_header start = { 715 .endpoint = ep, 716 .stream_id = 0, 717 .no_transfers = 5, 718 }; 719 /* Round bytes_per_transfer up to a multiple of max_packet_size */ 720 bpt = 512 + dev->endpoint[EP2I(ep)].max_packet_size - 1; 721 bpt /= dev->endpoint[EP2I(ep)].max_packet_size; 722 bpt *= dev->endpoint[EP2I(ep)].max_packet_size; 723 start.bytes_per_transfer = bpt; 724 /* No id, we look at the ep when receiving a status back */ 725 usbredirparser_send_start_bulk_receiving(dev->parser, 0, &start); 726 usbredirparser_do_write(dev->parser); 727 DPRINTF("bulk receiving started bytes/transfer %u count %d ep %02X\n", 728 start.bytes_per_transfer, start.no_transfers, ep); 729 dev->endpoint[EP2I(ep)].bulk_receiving_started = 1; 730 /* We don't really want to drop bulk packets ever, but 731 having some upper limit to how much we buffer is good. */ 732 dev->endpoint[EP2I(ep)].bufpq_target_size = 5000; 733 dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0; 734 } 735 736 if (QTAILQ_EMPTY(&dev->endpoint[EP2I(ep)].bufpq)) { 737 DPRINTF("bulk-token-in ep %02X, no bulkp\n", ep); 738 assert(dev->endpoint[EP2I(ep)].pending_async_packet == NULL); 739 dev->endpoint[EP2I(ep)].pending_async_packet = p; 740 p->status = USB_RET_ASYNC; 741 return; 742 } 743 usbredir_buffered_bulk_in_complete(dev, p, ep); 744 } 745 746 static void usbredir_stop_bulk_receiving(USBRedirDevice *dev, uint8_t ep) 747 { 748 struct usb_redir_stop_bulk_receiving_header stop_bulk = { 749 .endpoint = ep, 750 .stream_id = 0, 751 }; 752 if (dev->endpoint[EP2I(ep)].bulk_receiving_started) { 753 usbredirparser_send_stop_bulk_receiving(dev->parser, 0, &stop_bulk); 754 DPRINTF("bulk receiving stopped ep %02X\n", ep); 755 dev->endpoint[EP2I(ep)].bulk_receiving_started = 0; 756 } 757 usbredir_free_bufpq(dev, ep); 758 } 759 760 static void usbredir_handle_bulk_data(USBRedirDevice *dev, USBPacket *p, 761 uint8_t ep) 762 { 763 struct usb_redir_bulk_packet_header bulk_packet; 764 size_t size = usb_packet_size(p); 765 const int maxp = dev->endpoint[EP2I(ep)].max_packet_size; 766 767 if (usbredir_already_in_flight(dev, p->id)) { 768 p->status = USB_RET_ASYNC; 769 return; 770 } 771 772 if (dev->endpoint[EP2I(ep)].bulk_receiving_enabled) { 773 if (size != 0 && (size % maxp) == 0) { 774 usbredir_handle_buffered_bulk_in_data(dev, p, ep); 775 return; 776 } 777 WARNING("bulk recv invalid size %zd ep %02x, disabling\n", size, ep); 778 assert(dev->endpoint[EP2I(ep)].pending_async_packet == NULL); 779 usbredir_stop_bulk_receiving(dev, ep); 780 dev->endpoint[EP2I(ep)].bulk_receiving_enabled = 0; 781 } 782 783 DPRINTF("bulk-out ep %02X len %zd id %"PRIu64"\n", ep, size, p->id); 784 785 bulk_packet.endpoint = ep; 786 bulk_packet.length = size; 787 bulk_packet.stream_id = 0; 788 bulk_packet.length_high = size >> 16; 789 assert(bulk_packet.length_high == 0 || 790 usbredirparser_peer_has_cap(dev->parser, 791 usb_redir_cap_32bits_bulk_length)); 792 793 if (ep & USB_DIR_IN) { 794 usbredirparser_send_bulk_packet(dev->parser, p->id, 795 &bulk_packet, NULL, 0); 796 } else { 797 uint8_t buf[size]; 798 usb_packet_copy(p, buf, size); 799 usbredir_log_data(dev, "bulk data out:", buf, size); 800 usbredirparser_send_bulk_packet(dev->parser, p->id, 801 &bulk_packet, buf, size); 802 } 803 usbredirparser_do_write(dev->parser); 804 p->status = USB_RET_ASYNC; 805 } 806 807 static void usbredir_handle_interrupt_in_data(USBRedirDevice *dev, 808 USBPacket *p, uint8_t ep) 809 { 810 /* Input interrupt endpoint, buffered packet input */ 811 struct buf_packet *intp; 812 int status, len; 813 814 if (!dev->endpoint[EP2I(ep)].interrupt_started && 815 !dev->endpoint[EP2I(ep)].interrupt_error) { 816 struct usb_redir_start_interrupt_receiving_header start_int = { 817 .endpoint = ep, 818 }; 819 /* No id, we look at the ep when receiving a status back */ 820 usbredirparser_send_start_interrupt_receiving(dev->parser, 0, 821 &start_int); 822 usbredirparser_do_write(dev->parser); 823 DPRINTF("interrupt recv started ep %02X\n", ep); 824 dev->endpoint[EP2I(ep)].interrupt_started = 1; 825 /* We don't really want to drop interrupt packets ever, but 826 having some upper limit to how much we buffer is good. */ 827 dev->endpoint[EP2I(ep)].bufpq_target_size = 1000; 828 dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0; 829 } 830 831 intp = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq); 832 if (intp == NULL) { 833 DPRINTF2("interrupt-token-in ep %02X, no intp\n", ep); 834 /* Check interrupt_error for stream errors */ 835 status = dev->endpoint[EP2I(ep)].interrupt_error; 836 dev->endpoint[EP2I(ep)].interrupt_error = 0; 837 if (status) { 838 usbredir_handle_status(dev, p, status); 839 } else { 840 p->status = USB_RET_NAK; 841 } 842 return; 843 } 844 DPRINTF("interrupt-token-in ep %02X status %d len %d\n", ep, 845 intp->status, intp->len); 846 847 status = intp->status; 848 len = intp->len; 849 if (len > p->iov.size) { 850 ERROR("received int data is larger then packet ep %02X\n", ep); 851 len = p->iov.size; 852 status = usb_redir_babble; 853 } 854 usb_packet_copy(p, intp->data, len); 855 bufp_free(dev, intp, ep); 856 usbredir_handle_status(dev, p, status); 857 } 858 859 /* 860 * Handle interrupt out data, the usbredir protocol expects us to do this 861 * async, so that it can report back a completion status. But guests will 862 * expect immediate completion for an interrupt endpoint, and handling this 863 * async causes migration issues. So we report success directly, counting 864 * on the fact that output interrupt packets normally always succeed. 865 */ 866 static void usbredir_handle_interrupt_out_data(USBRedirDevice *dev, 867 USBPacket *p, uint8_t ep) 868 { 869 struct usb_redir_interrupt_packet_header interrupt_packet; 870 uint8_t buf[p->iov.size]; 871 872 DPRINTF("interrupt-out ep %02X len %zd id %"PRIu64"\n", ep, 873 p->iov.size, p->id); 874 875 interrupt_packet.endpoint = ep; 876 interrupt_packet.length = p->iov.size; 877 878 usb_packet_copy(p, buf, p->iov.size); 879 usbredir_log_data(dev, "interrupt data out:", buf, p->iov.size); 880 usbredirparser_send_interrupt_packet(dev->parser, p->id, 881 &interrupt_packet, buf, p->iov.size); 882 usbredirparser_do_write(dev->parser); 883 } 884 885 static void usbredir_stop_interrupt_receiving(USBRedirDevice *dev, 886 uint8_t ep) 887 { 888 struct usb_redir_stop_interrupt_receiving_header stop_interrupt_recv = { 889 .endpoint = ep 890 }; 891 if (dev->endpoint[EP2I(ep)].interrupt_started) { 892 usbredirparser_send_stop_interrupt_receiving(dev->parser, 0, 893 &stop_interrupt_recv); 894 DPRINTF("interrupt recv stopped ep %02X\n", ep); 895 dev->endpoint[EP2I(ep)].interrupt_started = 0; 896 } 897 dev->endpoint[EP2I(ep)].interrupt_error = 0; 898 usbredir_free_bufpq(dev, ep); 899 } 900 901 static void usbredir_handle_data(USBDevice *udev, USBPacket *p) 902 { 903 USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev); 904 uint8_t ep; 905 906 ep = p->ep->nr; 907 if (p->pid == USB_TOKEN_IN) { 908 ep |= USB_DIR_IN; 909 } 910 911 switch (dev->endpoint[EP2I(ep)].type) { 912 case USB_ENDPOINT_XFER_CONTROL: 913 ERROR("handle_data called for control transfer on ep %02X\n", ep); 914 p->status = USB_RET_NAK; 915 break; 916 case USB_ENDPOINT_XFER_BULK: 917 if (p->state == USB_PACKET_SETUP && p->pid == USB_TOKEN_IN && 918 p->ep->pipeline) { 919 p->status = USB_RET_ADD_TO_QUEUE; 920 break; 921 } 922 usbredir_handle_bulk_data(dev, p, ep); 923 break; 924 case USB_ENDPOINT_XFER_ISOC: 925 usbredir_handle_iso_data(dev, p, ep); 926 break; 927 case USB_ENDPOINT_XFER_INT: 928 if (ep & USB_DIR_IN) { 929 usbredir_handle_interrupt_in_data(dev, p, ep); 930 } else { 931 usbredir_handle_interrupt_out_data(dev, p, ep); 932 } 933 break; 934 default: 935 ERROR("handle_data ep %02X has unknown type %d\n", ep, 936 dev->endpoint[EP2I(ep)].type); 937 p->status = USB_RET_NAK; 938 } 939 } 940 941 static void usbredir_flush_ep_queue(USBDevice *dev, USBEndpoint *ep) 942 { 943 if (ep->pid == USB_TOKEN_IN && ep->pipeline) { 944 usb_ep_combine_input_packets(ep); 945 } 946 } 947 948 static void usbredir_stop_ep(USBRedirDevice *dev, int i) 949 { 950 uint8_t ep = I2EP(i); 951 952 switch (dev->endpoint[i].type) { 953 case USB_ENDPOINT_XFER_BULK: 954 if (ep & USB_DIR_IN) { 955 usbredir_stop_bulk_receiving(dev, ep); 956 } 957 break; 958 case USB_ENDPOINT_XFER_ISOC: 959 usbredir_stop_iso_stream(dev, ep); 960 break; 961 case USB_ENDPOINT_XFER_INT: 962 if (ep & USB_DIR_IN) { 963 usbredir_stop_interrupt_receiving(dev, ep); 964 } 965 break; 966 } 967 usbredir_free_bufpq(dev, ep); 968 } 969 970 static void usbredir_ep_stopped(USBDevice *udev, USBEndpoint *uep) 971 { 972 USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev); 973 974 usbredir_stop_ep(dev, USBEP2I(uep)); 975 usbredirparser_do_write(dev->parser); 976 } 977 978 static void usbredir_set_config(USBRedirDevice *dev, USBPacket *p, 979 int config) 980 { 981 struct usb_redir_set_configuration_header set_config; 982 int i; 983 984 DPRINTF("set config %d id %"PRIu64"\n", config, p->id); 985 986 for (i = 0; i < MAX_ENDPOINTS; i++) { 987 usbredir_stop_ep(dev, i); 988 } 989 990 set_config.configuration = config; 991 usbredirparser_send_set_configuration(dev->parser, p->id, &set_config); 992 usbredirparser_do_write(dev->parser); 993 p->status = USB_RET_ASYNC; 994 } 995 996 static void usbredir_get_config(USBRedirDevice *dev, USBPacket *p) 997 { 998 DPRINTF("get config id %"PRIu64"\n", p->id); 999 1000 usbredirparser_send_get_configuration(dev->parser, p->id); 1001 usbredirparser_do_write(dev->parser); 1002 p->status = USB_RET_ASYNC; 1003 } 1004 1005 static void usbredir_set_interface(USBRedirDevice *dev, USBPacket *p, 1006 int interface, int alt) 1007 { 1008 struct usb_redir_set_alt_setting_header set_alt; 1009 int i; 1010 1011 DPRINTF("set interface %d alt %d id %"PRIu64"\n", interface, alt, p->id); 1012 1013 for (i = 0; i < MAX_ENDPOINTS; i++) { 1014 if (dev->endpoint[i].interface == interface) { 1015 usbredir_stop_ep(dev, i); 1016 } 1017 } 1018 1019 set_alt.interface = interface; 1020 set_alt.alt = alt; 1021 usbredirparser_send_set_alt_setting(dev->parser, p->id, &set_alt); 1022 usbredirparser_do_write(dev->parser); 1023 p->status = USB_RET_ASYNC; 1024 } 1025 1026 static void usbredir_get_interface(USBRedirDevice *dev, USBPacket *p, 1027 int interface) 1028 { 1029 struct usb_redir_get_alt_setting_header get_alt; 1030 1031 DPRINTF("get interface %d id %"PRIu64"\n", interface, p->id); 1032 1033 get_alt.interface = interface; 1034 usbredirparser_send_get_alt_setting(dev->parser, p->id, &get_alt); 1035 usbredirparser_do_write(dev->parser); 1036 p->status = USB_RET_ASYNC; 1037 } 1038 1039 static void usbredir_handle_control(USBDevice *udev, USBPacket *p, 1040 int request, int value, int index, int length, uint8_t *data) 1041 { 1042 USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev); 1043 struct usb_redir_control_packet_header control_packet; 1044 1045 if (usbredir_already_in_flight(dev, p->id)) { 1046 p->status = USB_RET_ASYNC; 1047 return; 1048 } 1049 1050 /* Special cases for certain standard device requests */ 1051 switch (request) { 1052 case DeviceOutRequest | USB_REQ_SET_ADDRESS: 1053 DPRINTF("set address %d\n", value); 1054 dev->dev.addr = value; 1055 return; 1056 case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: 1057 usbredir_set_config(dev, p, value & 0xff); 1058 return; 1059 case DeviceRequest | USB_REQ_GET_CONFIGURATION: 1060 usbredir_get_config(dev, p); 1061 return; 1062 case InterfaceOutRequest | USB_REQ_SET_INTERFACE: 1063 usbredir_set_interface(dev, p, index, value); 1064 return; 1065 case InterfaceRequest | USB_REQ_GET_INTERFACE: 1066 usbredir_get_interface(dev, p, index); 1067 return; 1068 } 1069 1070 /* Normal ctrl requests, note request is (bRequestType << 8) | bRequest */ 1071 DPRINTF( 1072 "ctrl-out type 0x%x req 0x%x val 0x%x index %d len %d id %"PRIu64"\n", 1073 request >> 8, request & 0xff, value, index, length, p->id); 1074 1075 control_packet.request = request & 0xFF; 1076 control_packet.requesttype = request >> 8; 1077 control_packet.endpoint = control_packet.requesttype & USB_DIR_IN; 1078 control_packet.value = value; 1079 control_packet.index = index; 1080 control_packet.length = length; 1081 1082 if (control_packet.requesttype & USB_DIR_IN) { 1083 usbredirparser_send_control_packet(dev->parser, p->id, 1084 &control_packet, NULL, 0); 1085 } else { 1086 usbredir_log_data(dev, "ctrl data out:", data, length); 1087 usbredirparser_send_control_packet(dev->parser, p->id, 1088 &control_packet, data, length); 1089 } 1090 usbredirparser_do_write(dev->parser); 1091 p->status = USB_RET_ASYNC; 1092 } 1093 1094 /* 1095 * Close events can be triggered by usbredirparser_do_write which gets called 1096 * from within the USBDevice data / control packet callbacks and doing a 1097 * usb_detach from within these callbacks is not a good idea. 1098 * 1099 * So we use a bh handler to take care of close events. 1100 */ 1101 static void usbredir_chardev_close_bh(void *opaque) 1102 { 1103 USBRedirDevice *dev = opaque; 1104 1105 usbredir_device_disconnect(dev); 1106 1107 if (dev->parser) { 1108 DPRINTF("destroying usbredirparser\n"); 1109 usbredirparser_destroy(dev->parser); 1110 dev->parser = NULL; 1111 } 1112 if (dev->watch) { 1113 g_source_remove(dev->watch); 1114 dev->watch = 0; 1115 } 1116 } 1117 1118 static void usbredir_create_parser(USBRedirDevice *dev) 1119 { 1120 uint32_t caps[USB_REDIR_CAPS_SIZE] = { 0, }; 1121 int flags = 0; 1122 1123 DPRINTF("creating usbredirparser\n"); 1124 1125 dev->parser = qemu_oom_check(usbredirparser_create()); 1126 dev->parser->priv = dev; 1127 dev->parser->log_func = usbredir_log; 1128 dev->parser->read_func = usbredir_read; 1129 dev->parser->write_func = usbredir_write; 1130 dev->parser->hello_func = usbredir_hello; 1131 dev->parser->device_connect_func = usbredir_device_connect; 1132 dev->parser->device_disconnect_func = usbredir_device_disconnect; 1133 dev->parser->interface_info_func = usbredir_interface_info; 1134 dev->parser->ep_info_func = usbredir_ep_info; 1135 dev->parser->configuration_status_func = usbredir_configuration_status; 1136 dev->parser->alt_setting_status_func = usbredir_alt_setting_status; 1137 dev->parser->iso_stream_status_func = usbredir_iso_stream_status; 1138 dev->parser->interrupt_receiving_status_func = 1139 usbredir_interrupt_receiving_status; 1140 dev->parser->bulk_streams_status_func = usbredir_bulk_streams_status; 1141 dev->parser->bulk_receiving_status_func = usbredir_bulk_receiving_status; 1142 dev->parser->control_packet_func = usbredir_control_packet; 1143 dev->parser->bulk_packet_func = usbredir_bulk_packet; 1144 dev->parser->iso_packet_func = usbredir_iso_packet; 1145 dev->parser->interrupt_packet_func = usbredir_interrupt_packet; 1146 dev->parser->buffered_bulk_packet_func = usbredir_buffered_bulk_packet; 1147 dev->read_buf = NULL; 1148 dev->read_buf_size = 0; 1149 1150 usbredirparser_caps_set_cap(caps, usb_redir_cap_connect_device_version); 1151 usbredirparser_caps_set_cap(caps, usb_redir_cap_filter); 1152 usbredirparser_caps_set_cap(caps, usb_redir_cap_ep_info_max_packet_size); 1153 usbredirparser_caps_set_cap(caps, usb_redir_cap_64bits_ids); 1154 usbredirparser_caps_set_cap(caps, usb_redir_cap_32bits_bulk_length); 1155 usbredirparser_caps_set_cap(caps, usb_redir_cap_bulk_receiving); 1156 1157 if (runstate_check(RUN_STATE_INMIGRATE)) { 1158 flags |= usbredirparser_fl_no_hello; 1159 } 1160 usbredirparser_init(dev->parser, VERSION, caps, USB_REDIR_CAPS_SIZE, 1161 flags); 1162 usbredirparser_do_write(dev->parser); 1163 } 1164 1165 static void usbredir_reject_device(USBRedirDevice *dev) 1166 { 1167 usbredir_device_disconnect(dev); 1168 if (usbredirparser_peer_has_cap(dev->parser, usb_redir_cap_filter)) { 1169 usbredirparser_send_filter_reject(dev->parser); 1170 usbredirparser_do_write(dev->parser); 1171 } 1172 } 1173 1174 static void usbredir_do_attach(void *opaque) 1175 { 1176 USBRedirDevice *dev = opaque; 1177 1178 /* In order to work properly with XHCI controllers we need these caps */ 1179 if ((dev->dev.port->speedmask & USB_SPEED_MASK_SUPER) && !( 1180 usbredirparser_peer_has_cap(dev->parser, 1181 usb_redir_cap_ep_info_max_packet_size) && 1182 usbredirparser_peer_has_cap(dev->parser, 1183 usb_redir_cap_32bits_bulk_length) && 1184 usbredirparser_peer_has_cap(dev->parser, 1185 usb_redir_cap_64bits_ids))) { 1186 ERROR("usb-redir-host lacks capabilities needed for use with XHCI\n"); 1187 usbredir_reject_device(dev); 1188 return; 1189 } 1190 1191 if (usb_device_attach(&dev->dev) != 0) { 1192 WARNING("rejecting device due to speed mismatch\n"); 1193 usbredir_reject_device(dev); 1194 } 1195 } 1196 1197 /* 1198 * chardev callbacks 1199 */ 1200 1201 static int usbredir_chardev_can_read(void *opaque) 1202 { 1203 USBRedirDevice *dev = opaque; 1204 1205 if (!dev->parser) { 1206 WARNING("chardev_can_read called on non open chardev!\n"); 1207 return 0; 1208 } 1209 1210 /* Don't read new data from the chardev until our state is fully synced */ 1211 if (!runstate_check(RUN_STATE_RUNNING)) { 1212 return 0; 1213 } 1214 1215 /* usbredir_parser_do_read will consume *all* data we give it */ 1216 return 1024 * 1024; 1217 } 1218 1219 static void usbredir_chardev_read(void *opaque, const uint8_t *buf, int size) 1220 { 1221 USBRedirDevice *dev = opaque; 1222 1223 /* No recursion allowed! */ 1224 assert(dev->read_buf == NULL); 1225 1226 dev->read_buf = buf; 1227 dev->read_buf_size = size; 1228 1229 usbredirparser_do_read(dev->parser); 1230 /* Send any acks, etc. which may be queued now */ 1231 usbredirparser_do_write(dev->parser); 1232 } 1233 1234 static void usbredir_chardev_event(void *opaque, int event) 1235 { 1236 USBRedirDevice *dev = opaque; 1237 1238 switch (event) { 1239 case CHR_EVENT_OPENED: 1240 DPRINTF("chardev open\n"); 1241 /* Make sure any pending closes are handled (no-op if none pending) */ 1242 usbredir_chardev_close_bh(dev); 1243 qemu_bh_cancel(dev->chardev_close_bh); 1244 usbredir_create_parser(dev); 1245 break; 1246 case CHR_EVENT_CLOSED: 1247 DPRINTF("chardev close\n"); 1248 qemu_bh_schedule(dev->chardev_close_bh); 1249 break; 1250 } 1251 } 1252 1253 /* 1254 * init + destroy 1255 */ 1256 1257 static void usbredir_vm_state_change(void *priv, int running, RunState state) 1258 { 1259 USBRedirDevice *dev = priv; 1260 1261 if (state == RUN_STATE_RUNNING && dev->parser != NULL) { 1262 usbredirparser_do_write(dev->parser); /* Flush any pending writes */ 1263 } 1264 } 1265 1266 static void usbredir_init_endpoints(USBRedirDevice *dev) 1267 { 1268 int i; 1269 1270 usb_ep_init(&dev->dev); 1271 memset(dev->endpoint, 0, sizeof(dev->endpoint)); 1272 for (i = 0; i < MAX_ENDPOINTS; i++) { 1273 dev->endpoint[i].dev = dev; 1274 QTAILQ_INIT(&dev->endpoint[i].bufpq); 1275 } 1276 } 1277 1278 static int usbredir_initfn(USBDevice *udev) 1279 { 1280 USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev); 1281 int i; 1282 1283 if (dev->cs == NULL) { 1284 qerror_report(QERR_MISSING_PARAMETER, "chardev"); 1285 return -1; 1286 } 1287 1288 if (dev->filter_str) { 1289 i = usbredirfilter_string_to_rules(dev->filter_str, ":", "|", 1290 &dev->filter_rules, 1291 &dev->filter_rules_count); 1292 if (i) { 1293 qerror_report(QERR_INVALID_PARAMETER_VALUE, "filter", 1294 "a usb device filter string"); 1295 return -1; 1296 } 1297 } 1298 1299 dev->chardev_close_bh = qemu_bh_new(usbredir_chardev_close_bh, dev); 1300 dev->attach_timer = qemu_new_timer_ms(vm_clock, usbredir_do_attach, dev); 1301 1302 packet_id_queue_init(&dev->cancelled, dev, "cancelled"); 1303 packet_id_queue_init(&dev->already_in_flight, dev, "already-in-flight"); 1304 usbredir_init_endpoints(dev); 1305 1306 /* We'll do the attach once we receive the speed from the usb-host */ 1307 udev->auto_attach = 0; 1308 1309 /* Will be cleared during setup when we find conflicts */ 1310 dev->compatible_speedmask = USB_SPEED_MASK_FULL | USB_SPEED_MASK_HIGH; 1311 1312 /* Let the backend know we are ready */ 1313 qemu_chr_add_handlers(dev->cs, usbredir_chardev_can_read, 1314 usbredir_chardev_read, usbredir_chardev_event, dev); 1315 1316 qemu_add_vm_change_state_handler(usbredir_vm_state_change, dev); 1317 add_boot_device_path(dev->bootindex, &udev->qdev, NULL); 1318 return 0; 1319 } 1320 1321 static void usbredir_cleanup_device_queues(USBRedirDevice *dev) 1322 { 1323 int i; 1324 1325 packet_id_queue_empty(&dev->cancelled); 1326 packet_id_queue_empty(&dev->already_in_flight); 1327 for (i = 0; i < MAX_ENDPOINTS; i++) { 1328 usbredir_free_bufpq(dev, I2EP(i)); 1329 } 1330 } 1331 1332 static void usbredir_handle_destroy(USBDevice *udev) 1333 { 1334 USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev); 1335 1336 qemu_chr_delete(dev->cs); 1337 dev->cs = NULL; 1338 /* Note must be done after qemu_chr_close, as that causes a close event */ 1339 qemu_bh_delete(dev->chardev_close_bh); 1340 1341 qemu_del_timer(dev->attach_timer); 1342 qemu_free_timer(dev->attach_timer); 1343 1344 usbredir_cleanup_device_queues(dev); 1345 1346 if (dev->parser) { 1347 usbredirparser_destroy(dev->parser); 1348 } 1349 if (dev->watch) { 1350 g_source_remove(dev->watch); 1351 } 1352 1353 free(dev->filter_rules); 1354 } 1355 1356 static int usbredir_check_filter(USBRedirDevice *dev) 1357 { 1358 if (dev->interface_info.interface_count == NO_INTERFACE_INFO) { 1359 ERROR("No interface info for device\n"); 1360 goto error; 1361 } 1362 1363 if (dev->filter_rules) { 1364 if (!usbredirparser_peer_has_cap(dev->parser, 1365 usb_redir_cap_connect_device_version)) { 1366 ERROR("Device filter specified and peer does not have the " 1367 "connect_device_version capability\n"); 1368 goto error; 1369 } 1370 1371 if (usbredirfilter_check( 1372 dev->filter_rules, 1373 dev->filter_rules_count, 1374 dev->device_info.device_class, 1375 dev->device_info.device_subclass, 1376 dev->device_info.device_protocol, 1377 dev->interface_info.interface_class, 1378 dev->interface_info.interface_subclass, 1379 dev->interface_info.interface_protocol, 1380 dev->interface_info.interface_count, 1381 dev->device_info.vendor_id, 1382 dev->device_info.product_id, 1383 dev->device_info.device_version_bcd, 1384 0) != 0) { 1385 goto error; 1386 } 1387 } 1388 1389 return 0; 1390 1391 error: 1392 usbredir_reject_device(dev); 1393 return -1; 1394 } 1395 1396 static void usbredir_check_bulk_receiving(USBRedirDevice *dev) 1397 { 1398 int i, j, quirks; 1399 1400 if (!usbredirparser_peer_has_cap(dev->parser, 1401 usb_redir_cap_bulk_receiving)) { 1402 return; 1403 } 1404 1405 for (i = EP2I(USB_DIR_IN); i < MAX_ENDPOINTS; i++) { 1406 dev->endpoint[i].bulk_receiving_enabled = 0; 1407 } 1408 for (i = 0; i < dev->interface_info.interface_count; i++) { 1409 quirks = usb_get_quirks(dev->device_info.vendor_id, 1410 dev->device_info.product_id, 1411 dev->interface_info.interface_class[i], 1412 dev->interface_info.interface_subclass[i], 1413 dev->interface_info.interface_protocol[i]); 1414 if (!(quirks & USB_QUIRK_BUFFER_BULK_IN)) { 1415 continue; 1416 } 1417 if (quirks & USB_QUIRK_IS_FTDI) { 1418 dev->buffered_bulk_in_complete = 1419 usbredir_buffered_bulk_in_complete_ftdi; 1420 } else { 1421 dev->buffered_bulk_in_complete = 1422 usbredir_buffered_bulk_in_complete_raw; 1423 } 1424 1425 for (j = EP2I(USB_DIR_IN); j < MAX_ENDPOINTS; j++) { 1426 if (dev->endpoint[j].interface == 1427 dev->interface_info.interface[i] && 1428 dev->endpoint[j].type == USB_ENDPOINT_XFER_BULK && 1429 dev->endpoint[j].max_packet_size != 0) { 1430 dev->endpoint[j].bulk_receiving_enabled = 1; 1431 /* 1432 * With buffering pipelining is not necessary. Also packet 1433 * combining and bulk in buffering don't play nice together! 1434 */ 1435 I2USBEP(dev, j)->pipeline = false; 1436 break; /* Only buffer for the first ep of each intf */ 1437 } 1438 } 1439 } 1440 } 1441 1442 /* 1443 * usbredirparser packet complete callbacks 1444 */ 1445 1446 static void usbredir_handle_status(USBRedirDevice *dev, USBPacket *p, 1447 int status) 1448 { 1449 switch (status) { 1450 case usb_redir_success: 1451 p->status = USB_RET_SUCCESS; /* Clear previous ASYNC status */ 1452 break; 1453 case usb_redir_stall: 1454 p->status = USB_RET_STALL; 1455 break; 1456 case usb_redir_cancelled: 1457 /* 1458 * When the usbredir-host unredirects a device, it will report a status 1459 * of cancelled for all pending packets, followed by a disconnect msg. 1460 */ 1461 p->status = USB_RET_IOERROR; 1462 break; 1463 case usb_redir_inval: 1464 WARNING("got invalid param error from usb-host?\n"); 1465 p->status = USB_RET_IOERROR; 1466 break; 1467 case usb_redir_babble: 1468 p->status = USB_RET_BABBLE; 1469 break; 1470 case usb_redir_ioerror: 1471 case usb_redir_timeout: 1472 default: 1473 p->status = USB_RET_IOERROR; 1474 } 1475 } 1476 1477 static void usbredir_hello(void *priv, struct usb_redir_hello_header *h) 1478 { 1479 USBRedirDevice *dev = priv; 1480 1481 /* Try to send the filter info now that we've the usb-host's caps */ 1482 if (usbredirparser_peer_has_cap(dev->parser, usb_redir_cap_filter) && 1483 dev->filter_rules) { 1484 usbredirparser_send_filter_filter(dev->parser, dev->filter_rules, 1485 dev->filter_rules_count); 1486 usbredirparser_do_write(dev->parser); 1487 } 1488 } 1489 1490 static void usbredir_device_connect(void *priv, 1491 struct usb_redir_device_connect_header *device_connect) 1492 { 1493 USBRedirDevice *dev = priv; 1494 const char *speed; 1495 1496 if (timer_pending(dev->attach_timer) || dev->dev.attached) { 1497 ERROR("Received device connect while already connected\n"); 1498 return; 1499 } 1500 1501 switch (device_connect->speed) { 1502 case usb_redir_speed_low: 1503 speed = "low speed"; 1504 dev->dev.speed = USB_SPEED_LOW; 1505 dev->compatible_speedmask &= ~USB_SPEED_MASK_FULL; 1506 dev->compatible_speedmask &= ~USB_SPEED_MASK_HIGH; 1507 break; 1508 case usb_redir_speed_full: 1509 speed = "full speed"; 1510 dev->dev.speed = USB_SPEED_FULL; 1511 dev->compatible_speedmask &= ~USB_SPEED_MASK_HIGH; 1512 break; 1513 case usb_redir_speed_high: 1514 speed = "high speed"; 1515 dev->dev.speed = USB_SPEED_HIGH; 1516 break; 1517 case usb_redir_speed_super: 1518 speed = "super speed"; 1519 dev->dev.speed = USB_SPEED_SUPER; 1520 break; 1521 default: 1522 speed = "unknown speed"; 1523 dev->dev.speed = USB_SPEED_FULL; 1524 } 1525 1526 if (usbredirparser_peer_has_cap(dev->parser, 1527 usb_redir_cap_connect_device_version)) { 1528 INFO("attaching %s device %04x:%04x version %d.%d class %02x\n", 1529 speed, device_connect->vendor_id, device_connect->product_id, 1530 ((device_connect->device_version_bcd & 0xf000) >> 12) * 10 + 1531 ((device_connect->device_version_bcd & 0x0f00) >> 8), 1532 ((device_connect->device_version_bcd & 0x00f0) >> 4) * 10 + 1533 ((device_connect->device_version_bcd & 0x000f) >> 0), 1534 device_connect->device_class); 1535 } else { 1536 INFO("attaching %s device %04x:%04x class %02x\n", speed, 1537 device_connect->vendor_id, device_connect->product_id, 1538 device_connect->device_class); 1539 } 1540 1541 dev->dev.speedmask = (1 << dev->dev.speed) | dev->compatible_speedmask; 1542 dev->device_info = *device_connect; 1543 1544 if (usbredir_check_filter(dev)) { 1545 WARNING("Device %04x:%04x rejected by device filter, not attaching\n", 1546 device_connect->vendor_id, device_connect->product_id); 1547 return; 1548 } 1549 1550 usbredir_check_bulk_receiving(dev); 1551 qemu_mod_timer(dev->attach_timer, dev->next_attach_time); 1552 } 1553 1554 static void usbredir_device_disconnect(void *priv) 1555 { 1556 USBRedirDevice *dev = priv; 1557 1558 /* Stop any pending attaches */ 1559 qemu_del_timer(dev->attach_timer); 1560 1561 if (dev->dev.attached) { 1562 DPRINTF("detaching device\n"); 1563 usb_device_detach(&dev->dev); 1564 /* 1565 * Delay next usb device attach to give the guest a chance to see 1566 * see the detach / attach in case of quick close / open succession 1567 */ 1568 dev->next_attach_time = qemu_get_clock_ms(vm_clock) + 200; 1569 } 1570 1571 /* Reset state so that the next dev connected starts with a clean slate */ 1572 usbredir_cleanup_device_queues(dev); 1573 usbredir_init_endpoints(dev); 1574 dev->interface_info.interface_count = NO_INTERFACE_INFO; 1575 dev->dev.addr = 0; 1576 dev->dev.speed = 0; 1577 dev->compatible_speedmask = USB_SPEED_MASK_FULL | USB_SPEED_MASK_HIGH; 1578 } 1579 1580 static void usbredir_interface_info(void *priv, 1581 struct usb_redir_interface_info_header *interface_info) 1582 { 1583 USBRedirDevice *dev = priv; 1584 1585 dev->interface_info = *interface_info; 1586 1587 /* 1588 * If we receive interface info after the device has already been 1589 * connected (ie on a set_config), re-check interface dependent things. 1590 */ 1591 if (timer_pending(dev->attach_timer) || dev->dev.attached) { 1592 usbredir_check_bulk_receiving(dev); 1593 if (usbredir_check_filter(dev)) { 1594 ERROR("Device no longer matches filter after interface info " 1595 "change, disconnecting!\n"); 1596 } 1597 } 1598 } 1599 1600 static void usbredir_mark_speed_incompatible(USBRedirDevice *dev, int speed) 1601 { 1602 dev->compatible_speedmask &= ~(1 << speed); 1603 dev->dev.speedmask = (1 << dev->dev.speed) | dev->compatible_speedmask; 1604 } 1605 1606 static void usbredir_set_pipeline(USBRedirDevice *dev, struct USBEndpoint *uep) 1607 { 1608 if (uep->type != USB_ENDPOINT_XFER_BULK) { 1609 return; 1610 } 1611 if (uep->pid == USB_TOKEN_OUT) { 1612 uep->pipeline = true; 1613 } 1614 if (uep->pid == USB_TOKEN_IN && uep->max_packet_size != 0 && 1615 usbredirparser_peer_has_cap(dev->parser, 1616 usb_redir_cap_32bits_bulk_length)) { 1617 uep->pipeline = true; 1618 } 1619 } 1620 1621 static void usbredir_setup_usb_eps(USBRedirDevice *dev) 1622 { 1623 struct USBEndpoint *usb_ep; 1624 int i; 1625 1626 for (i = 0; i < MAX_ENDPOINTS; i++) { 1627 usb_ep = I2USBEP(dev, i); 1628 usb_ep->type = dev->endpoint[i].type; 1629 usb_ep->ifnum = dev->endpoint[i].interface; 1630 usb_ep->max_packet_size = dev->endpoint[i].max_packet_size; 1631 usbredir_set_pipeline(dev, usb_ep); 1632 } 1633 } 1634 1635 static void usbredir_ep_info(void *priv, 1636 struct usb_redir_ep_info_header *ep_info) 1637 { 1638 USBRedirDevice *dev = priv; 1639 int i; 1640 1641 for (i = 0; i < MAX_ENDPOINTS; i++) { 1642 dev->endpoint[i].type = ep_info->type[i]; 1643 dev->endpoint[i].interval = ep_info->interval[i]; 1644 dev->endpoint[i].interface = ep_info->interface[i]; 1645 if (usbredirparser_peer_has_cap(dev->parser, 1646 usb_redir_cap_ep_info_max_packet_size)) { 1647 dev->endpoint[i].max_packet_size = ep_info->max_packet_size[i]; 1648 } 1649 switch (dev->endpoint[i].type) { 1650 case usb_redir_type_invalid: 1651 break; 1652 case usb_redir_type_iso: 1653 usbredir_mark_speed_incompatible(dev, USB_SPEED_FULL); 1654 usbredir_mark_speed_incompatible(dev, USB_SPEED_HIGH); 1655 /* Fall through */ 1656 case usb_redir_type_interrupt: 1657 if (!usbredirparser_peer_has_cap(dev->parser, 1658 usb_redir_cap_ep_info_max_packet_size) || 1659 ep_info->max_packet_size[i] > 64) { 1660 usbredir_mark_speed_incompatible(dev, USB_SPEED_FULL); 1661 } 1662 if (!usbredirparser_peer_has_cap(dev->parser, 1663 usb_redir_cap_ep_info_max_packet_size) || 1664 ep_info->max_packet_size[i] > 1024) { 1665 usbredir_mark_speed_incompatible(dev, USB_SPEED_HIGH); 1666 } 1667 if (dev->endpoint[i].interval == 0) { 1668 ERROR("Received 0 interval for isoc or irq endpoint\n"); 1669 usbredir_reject_device(dev); 1670 return; 1671 } 1672 /* Fall through */ 1673 case usb_redir_type_control: 1674 case usb_redir_type_bulk: 1675 DPRINTF("ep: %02X type: %d interface: %d\n", I2EP(i), 1676 dev->endpoint[i].type, dev->endpoint[i].interface); 1677 break; 1678 default: 1679 ERROR("Received invalid endpoint type\n"); 1680 usbredir_reject_device(dev); 1681 return; 1682 } 1683 } 1684 /* The new ep info may have caused a speed incompatibility, recheck */ 1685 if (dev->dev.attached && 1686 !(dev->dev.port->speedmask & dev->dev.speedmask)) { 1687 ERROR("Device no longer matches speed after endpoint info change, " 1688 "disconnecting!\n"); 1689 usbredir_reject_device(dev); 1690 return; 1691 } 1692 usbredir_setup_usb_eps(dev); 1693 usbredir_check_bulk_receiving(dev); 1694 } 1695 1696 static void usbredir_configuration_status(void *priv, uint64_t id, 1697 struct usb_redir_configuration_status_header *config_status) 1698 { 1699 USBRedirDevice *dev = priv; 1700 USBPacket *p; 1701 1702 DPRINTF("set config status %d config %d id %"PRIu64"\n", 1703 config_status->status, config_status->configuration, id); 1704 1705 p = usbredir_find_packet_by_id(dev, 0, id); 1706 if (p) { 1707 if (dev->dev.setup_buf[0] & USB_DIR_IN) { 1708 dev->dev.data_buf[0] = config_status->configuration; 1709 p->actual_length = 1; 1710 } 1711 usbredir_handle_status(dev, p, config_status->status); 1712 usb_generic_async_ctrl_complete(&dev->dev, p); 1713 } 1714 } 1715 1716 static void usbredir_alt_setting_status(void *priv, uint64_t id, 1717 struct usb_redir_alt_setting_status_header *alt_setting_status) 1718 { 1719 USBRedirDevice *dev = priv; 1720 USBPacket *p; 1721 1722 DPRINTF("alt status %d intf %d alt %d id: %"PRIu64"\n", 1723 alt_setting_status->status, alt_setting_status->interface, 1724 alt_setting_status->alt, id); 1725 1726 p = usbredir_find_packet_by_id(dev, 0, id); 1727 if (p) { 1728 if (dev->dev.setup_buf[0] & USB_DIR_IN) { 1729 dev->dev.data_buf[0] = alt_setting_status->alt; 1730 p->actual_length = 1; 1731 } 1732 usbredir_handle_status(dev, p, alt_setting_status->status); 1733 usb_generic_async_ctrl_complete(&dev->dev, p); 1734 } 1735 } 1736 1737 static void usbredir_iso_stream_status(void *priv, uint64_t id, 1738 struct usb_redir_iso_stream_status_header *iso_stream_status) 1739 { 1740 USBRedirDevice *dev = priv; 1741 uint8_t ep = iso_stream_status->endpoint; 1742 1743 DPRINTF("iso status %d ep %02X id %"PRIu64"\n", iso_stream_status->status, 1744 ep, id); 1745 1746 if (!dev->dev.attached || !dev->endpoint[EP2I(ep)].iso_started) { 1747 return; 1748 } 1749 1750 dev->endpoint[EP2I(ep)].iso_error = iso_stream_status->status; 1751 if (iso_stream_status->status == usb_redir_stall) { 1752 DPRINTF("iso stream stopped by peer ep %02X\n", ep); 1753 dev->endpoint[EP2I(ep)].iso_started = 0; 1754 } 1755 } 1756 1757 static void usbredir_interrupt_receiving_status(void *priv, uint64_t id, 1758 struct usb_redir_interrupt_receiving_status_header 1759 *interrupt_receiving_status) 1760 { 1761 USBRedirDevice *dev = priv; 1762 uint8_t ep = interrupt_receiving_status->endpoint; 1763 1764 DPRINTF("interrupt recv status %d ep %02X id %"PRIu64"\n", 1765 interrupt_receiving_status->status, ep, id); 1766 1767 if (!dev->dev.attached || !dev->endpoint[EP2I(ep)].interrupt_started) { 1768 return; 1769 } 1770 1771 dev->endpoint[EP2I(ep)].interrupt_error = 1772 interrupt_receiving_status->status; 1773 if (interrupt_receiving_status->status == usb_redir_stall) { 1774 DPRINTF("interrupt receiving stopped by peer ep %02X\n", ep); 1775 dev->endpoint[EP2I(ep)].interrupt_started = 0; 1776 } 1777 } 1778 1779 static void usbredir_bulk_streams_status(void *priv, uint64_t id, 1780 struct usb_redir_bulk_streams_status_header *bulk_streams_status) 1781 { 1782 } 1783 1784 static void usbredir_bulk_receiving_status(void *priv, uint64_t id, 1785 struct usb_redir_bulk_receiving_status_header *bulk_receiving_status) 1786 { 1787 USBRedirDevice *dev = priv; 1788 uint8_t ep = bulk_receiving_status->endpoint; 1789 1790 DPRINTF("bulk recv status %d ep %02X id %"PRIu64"\n", 1791 bulk_receiving_status->status, ep, id); 1792 1793 if (!dev->dev.attached || !dev->endpoint[EP2I(ep)].bulk_receiving_started) { 1794 return; 1795 } 1796 1797 if (bulk_receiving_status->status == usb_redir_stall) { 1798 DPRINTF("bulk receiving stopped by peer ep %02X\n", ep); 1799 dev->endpoint[EP2I(ep)].bulk_receiving_started = 0; 1800 } 1801 } 1802 1803 static void usbredir_control_packet(void *priv, uint64_t id, 1804 struct usb_redir_control_packet_header *control_packet, 1805 uint8_t *data, int data_len) 1806 { 1807 USBRedirDevice *dev = priv; 1808 USBPacket *p; 1809 int len = control_packet->length; 1810 1811 DPRINTF("ctrl-in status %d len %d id %"PRIu64"\n", control_packet->status, 1812 len, id); 1813 1814 /* Fix up USB-3 ep0 maxpacket size to allow superspeed connected devices 1815 * to work redirected to a not superspeed capable hcd */ 1816 if (dev->dev.speed == USB_SPEED_SUPER && 1817 !((dev->dev.port->speedmask & USB_SPEED_MASK_SUPER)) && 1818 control_packet->requesttype == 0x80 && 1819 control_packet->request == 6 && 1820 control_packet->value == 0x100 && control_packet->index == 0 && 1821 data_len >= 18 && data[7] == 9) { 1822 data[7] = 64; 1823 } 1824 1825 p = usbredir_find_packet_by_id(dev, 0, id); 1826 if (p) { 1827 usbredir_handle_status(dev, p, control_packet->status); 1828 if (data_len > 0) { 1829 usbredir_log_data(dev, "ctrl data in:", data, data_len); 1830 if (data_len > sizeof(dev->dev.data_buf)) { 1831 ERROR("ctrl buffer too small (%d > %zu)\n", 1832 data_len, sizeof(dev->dev.data_buf)); 1833 p->status = USB_RET_STALL; 1834 data_len = len = sizeof(dev->dev.data_buf); 1835 } 1836 memcpy(dev->dev.data_buf, data, data_len); 1837 } 1838 p->actual_length = len; 1839 usb_generic_async_ctrl_complete(&dev->dev, p); 1840 } 1841 free(data); 1842 } 1843 1844 static void usbredir_bulk_packet(void *priv, uint64_t id, 1845 struct usb_redir_bulk_packet_header *bulk_packet, 1846 uint8_t *data, int data_len) 1847 { 1848 USBRedirDevice *dev = priv; 1849 uint8_t ep = bulk_packet->endpoint; 1850 int len = (bulk_packet->length_high << 16) | bulk_packet->length; 1851 USBPacket *p; 1852 1853 DPRINTF("bulk-in status %d ep %02X len %d id %"PRIu64"\n", 1854 bulk_packet->status, ep, len, id); 1855 1856 p = usbredir_find_packet_by_id(dev, ep, id); 1857 if (p) { 1858 size_t size = usb_packet_size(p); 1859 usbredir_handle_status(dev, p, bulk_packet->status); 1860 if (data_len > 0) { 1861 usbredir_log_data(dev, "bulk data in:", data, data_len); 1862 if (data_len > size) { 1863 ERROR("bulk got more data then requested (%d > %zd)\n", 1864 data_len, p->iov.size); 1865 p->status = USB_RET_BABBLE; 1866 data_len = len = size; 1867 } 1868 usb_packet_copy(p, data, data_len); 1869 } 1870 p->actual_length = len; 1871 if (p->pid == USB_TOKEN_IN && p->ep->pipeline) { 1872 usb_combined_input_packet_complete(&dev->dev, p); 1873 } else { 1874 usb_packet_complete(&dev->dev, p); 1875 } 1876 } 1877 free(data); 1878 } 1879 1880 static void usbredir_iso_packet(void *priv, uint64_t id, 1881 struct usb_redir_iso_packet_header *iso_packet, 1882 uint8_t *data, int data_len) 1883 { 1884 USBRedirDevice *dev = priv; 1885 uint8_t ep = iso_packet->endpoint; 1886 1887 DPRINTF2("iso-in status %d ep %02X len %d id %"PRIu64"\n", 1888 iso_packet->status, ep, data_len, id); 1889 1890 if (dev->endpoint[EP2I(ep)].type != USB_ENDPOINT_XFER_ISOC) { 1891 ERROR("received iso packet for non iso endpoint %02X\n", ep); 1892 free(data); 1893 return; 1894 } 1895 1896 if (dev->endpoint[EP2I(ep)].iso_started == 0) { 1897 DPRINTF("received iso packet for non started stream ep %02X\n", ep); 1898 free(data); 1899 return; 1900 } 1901 1902 /* bufp_alloc also adds the packet to the ep queue */ 1903 bufp_alloc(dev, data, data_len, iso_packet->status, ep, data); 1904 } 1905 1906 static void usbredir_interrupt_packet(void *priv, uint64_t id, 1907 struct usb_redir_interrupt_packet_header *interrupt_packet, 1908 uint8_t *data, int data_len) 1909 { 1910 USBRedirDevice *dev = priv; 1911 uint8_t ep = interrupt_packet->endpoint; 1912 1913 DPRINTF("interrupt-in status %d ep %02X len %d id %"PRIu64"\n", 1914 interrupt_packet->status, ep, data_len, id); 1915 1916 if (dev->endpoint[EP2I(ep)].type != USB_ENDPOINT_XFER_INT) { 1917 ERROR("received int packet for non interrupt endpoint %02X\n", ep); 1918 free(data); 1919 return; 1920 } 1921 1922 if (ep & USB_DIR_IN) { 1923 if (dev->endpoint[EP2I(ep)].interrupt_started == 0) { 1924 DPRINTF("received int packet while not started ep %02X\n", ep); 1925 free(data); 1926 return; 1927 } 1928 1929 if (QTAILQ_EMPTY(&dev->endpoint[EP2I(ep)].bufpq)) { 1930 usb_wakeup(usb_ep_get(&dev->dev, USB_TOKEN_IN, ep & 0x0f), 0); 1931 } 1932 1933 /* bufp_alloc also adds the packet to the ep queue */ 1934 bufp_alloc(dev, data, data_len, interrupt_packet->status, ep, data); 1935 } else { 1936 /* 1937 * We report output interrupt packets as completed directly upon 1938 * submission, so all we can do here if one failed is warn. 1939 */ 1940 if (interrupt_packet->status) { 1941 WARNING("interrupt output failed status %d ep %02X id %"PRIu64"\n", 1942 interrupt_packet->status, ep, id); 1943 } 1944 } 1945 } 1946 1947 static void usbredir_buffered_bulk_packet(void *priv, uint64_t id, 1948 struct usb_redir_buffered_bulk_packet_header *buffered_bulk_packet, 1949 uint8_t *data, int data_len) 1950 { 1951 USBRedirDevice *dev = priv; 1952 uint8_t status, ep = buffered_bulk_packet->endpoint; 1953 void *free_on_destroy; 1954 int i, len; 1955 1956 DPRINTF("buffered-bulk-in status %d ep %02X len %d id %"PRIu64"\n", 1957 buffered_bulk_packet->status, ep, data_len, id); 1958 1959 if (dev->endpoint[EP2I(ep)].type != USB_ENDPOINT_XFER_BULK) { 1960 ERROR("received buffered-bulk packet for non bulk ep %02X\n", ep); 1961 free(data); 1962 return; 1963 } 1964 1965 if (dev->endpoint[EP2I(ep)].bulk_receiving_started == 0) { 1966 DPRINTF("received buffered-bulk packet on not started ep %02X\n", ep); 1967 free(data); 1968 return; 1969 } 1970 1971 /* Data must be in maxp chunks for buffered_bulk_add_*_data_to_packet */ 1972 len = dev->endpoint[EP2I(ep)].max_packet_size; 1973 status = usb_redir_success; 1974 free_on_destroy = NULL; 1975 for (i = 0; i < data_len; i += len) { 1976 if (len >= (data_len - i)) { 1977 len = data_len - i; 1978 status = buffered_bulk_packet->status; 1979 free_on_destroy = data; 1980 } 1981 /* bufp_alloc also adds the packet to the ep queue */ 1982 bufp_alloc(dev, data + i, len, status, ep, free_on_destroy); 1983 } 1984 1985 if (dev->endpoint[EP2I(ep)].pending_async_packet) { 1986 USBPacket *p = dev->endpoint[EP2I(ep)].pending_async_packet; 1987 dev->endpoint[EP2I(ep)].pending_async_packet = NULL; 1988 usbredir_buffered_bulk_in_complete(dev, p, ep); 1989 usb_packet_complete(&dev->dev, p); 1990 } 1991 } 1992 1993 /* 1994 * Migration code 1995 */ 1996 1997 static void usbredir_pre_save(void *priv) 1998 { 1999 USBRedirDevice *dev = priv; 2000 2001 usbredir_fill_already_in_flight(dev); 2002 } 2003 2004 static int usbredir_post_load(void *priv, int version_id) 2005 { 2006 USBRedirDevice *dev = priv; 2007 2008 if (dev->parser == NULL) { 2009 return 0; 2010 } 2011 2012 switch (dev->device_info.speed) { 2013 case usb_redir_speed_low: 2014 dev->dev.speed = USB_SPEED_LOW; 2015 break; 2016 case usb_redir_speed_full: 2017 dev->dev.speed = USB_SPEED_FULL; 2018 break; 2019 case usb_redir_speed_high: 2020 dev->dev.speed = USB_SPEED_HIGH; 2021 break; 2022 case usb_redir_speed_super: 2023 dev->dev.speed = USB_SPEED_SUPER; 2024 break; 2025 default: 2026 dev->dev.speed = USB_SPEED_FULL; 2027 } 2028 dev->dev.speedmask = (1 << dev->dev.speed); 2029 2030 usbredir_setup_usb_eps(dev); 2031 usbredir_check_bulk_receiving(dev); 2032 2033 return 0; 2034 } 2035 2036 /* For usbredirparser migration */ 2037 static void usbredir_put_parser(QEMUFile *f, void *priv, size_t unused) 2038 { 2039 USBRedirDevice *dev = priv; 2040 uint8_t *data; 2041 int len; 2042 2043 if (dev->parser == NULL) { 2044 qemu_put_be32(f, 0); 2045 return; 2046 } 2047 2048 usbredirparser_serialize(dev->parser, &data, &len); 2049 qemu_oom_check(data); 2050 2051 qemu_put_be32(f, len); 2052 qemu_put_buffer(f, data, len); 2053 2054 free(data); 2055 } 2056 2057 static int usbredir_get_parser(QEMUFile *f, void *priv, size_t unused) 2058 { 2059 USBRedirDevice *dev = priv; 2060 uint8_t *data; 2061 int len, ret; 2062 2063 len = qemu_get_be32(f); 2064 if (len == 0) { 2065 return 0; 2066 } 2067 2068 /* 2069 * If our chardev is not open already at this point the usbredir connection 2070 * has been broken (non seamless migration, or restore from disk). 2071 * 2072 * In this case create a temporary parser to receive the migration data, 2073 * and schedule the close_bh to report the device as disconnected to the 2074 * guest and to destroy the parser again. 2075 */ 2076 if (dev->parser == NULL) { 2077 WARNING("usb-redir connection broken during migration\n"); 2078 usbredir_create_parser(dev); 2079 qemu_bh_schedule(dev->chardev_close_bh); 2080 } 2081 2082 data = g_malloc(len); 2083 qemu_get_buffer(f, data, len); 2084 2085 ret = usbredirparser_unserialize(dev->parser, data, len); 2086 2087 g_free(data); 2088 2089 return ret; 2090 } 2091 2092 static const VMStateInfo usbredir_parser_vmstate_info = { 2093 .name = "usb-redir-parser", 2094 .put = usbredir_put_parser, 2095 .get = usbredir_get_parser, 2096 }; 2097 2098 2099 /* For buffered packets (iso/irq) queue migration */ 2100 static void usbredir_put_bufpq(QEMUFile *f, void *priv, size_t unused) 2101 { 2102 struct endp_data *endp = priv; 2103 USBRedirDevice *dev = endp->dev; 2104 struct buf_packet *bufp; 2105 int len, i = 0; 2106 2107 qemu_put_be32(f, endp->bufpq_size); 2108 QTAILQ_FOREACH(bufp, &endp->bufpq, next) { 2109 len = bufp->len - bufp->offset; 2110 DPRINTF("put_bufpq %d/%d len %d status %d\n", i + 1, endp->bufpq_size, 2111 len, bufp->status); 2112 qemu_put_be32(f, len); 2113 qemu_put_be32(f, bufp->status); 2114 qemu_put_buffer(f, bufp->data + bufp->offset, len); 2115 i++; 2116 } 2117 assert(i == endp->bufpq_size); 2118 } 2119 2120 static int usbredir_get_bufpq(QEMUFile *f, void *priv, size_t unused) 2121 { 2122 struct endp_data *endp = priv; 2123 USBRedirDevice *dev = endp->dev; 2124 struct buf_packet *bufp; 2125 int i; 2126 2127 endp->bufpq_size = qemu_get_be32(f); 2128 for (i = 0; i < endp->bufpq_size; i++) { 2129 bufp = g_malloc(sizeof(struct buf_packet)); 2130 bufp->len = qemu_get_be32(f); 2131 bufp->status = qemu_get_be32(f); 2132 bufp->offset = 0; 2133 bufp->data = qemu_oom_check(malloc(bufp->len)); /* regular malloc! */ 2134 bufp->free_on_destroy = bufp->data; 2135 qemu_get_buffer(f, bufp->data, bufp->len); 2136 QTAILQ_INSERT_TAIL(&endp->bufpq, bufp, next); 2137 DPRINTF("get_bufpq %d/%d len %d status %d\n", i + 1, endp->bufpq_size, 2138 bufp->len, bufp->status); 2139 } 2140 return 0; 2141 } 2142 2143 static const VMStateInfo usbredir_ep_bufpq_vmstate_info = { 2144 .name = "usb-redir-bufpq", 2145 .put = usbredir_put_bufpq, 2146 .get = usbredir_get_bufpq, 2147 }; 2148 2149 2150 /* For endp_data migration */ 2151 static const VMStateDescription usbredir_bulk_receiving_vmstate = { 2152 .name = "usb-redir-ep/bulk-receiving", 2153 .version_id = 1, 2154 .minimum_version_id = 1, 2155 .fields = (VMStateField[]) { 2156 VMSTATE_UINT8(bulk_receiving_started, struct endp_data), 2157 VMSTATE_END_OF_LIST() 2158 } 2159 }; 2160 2161 static bool usbredir_bulk_receiving_needed(void *priv) 2162 { 2163 struct endp_data *endp = priv; 2164 2165 return endp->bulk_receiving_started; 2166 } 2167 2168 static const VMStateDescription usbredir_ep_vmstate = { 2169 .name = "usb-redir-ep", 2170 .version_id = 1, 2171 .minimum_version_id = 1, 2172 .fields = (VMStateField[]) { 2173 VMSTATE_UINT8(type, struct endp_data), 2174 VMSTATE_UINT8(interval, struct endp_data), 2175 VMSTATE_UINT8(interface, struct endp_data), 2176 VMSTATE_UINT16(max_packet_size, struct endp_data), 2177 VMSTATE_UINT8(iso_started, struct endp_data), 2178 VMSTATE_UINT8(iso_error, struct endp_data), 2179 VMSTATE_UINT8(interrupt_started, struct endp_data), 2180 VMSTATE_UINT8(interrupt_error, struct endp_data), 2181 VMSTATE_UINT8(bufpq_prefilled, struct endp_data), 2182 VMSTATE_UINT8(bufpq_dropping_packets, struct endp_data), 2183 { 2184 .name = "bufpq", 2185 .version_id = 0, 2186 .field_exists = NULL, 2187 .size = 0, 2188 .info = &usbredir_ep_bufpq_vmstate_info, 2189 .flags = VMS_SINGLE, 2190 .offset = 0, 2191 }, 2192 VMSTATE_INT32(bufpq_target_size, struct endp_data), 2193 VMSTATE_END_OF_LIST() 2194 }, 2195 .subsections = (VMStateSubsection[]) { 2196 { 2197 .vmsd = &usbredir_bulk_receiving_vmstate, 2198 .needed = usbredir_bulk_receiving_needed, 2199 }, { 2200 /* empty */ 2201 } 2202 } 2203 }; 2204 2205 2206 /* For PacketIdQueue migration */ 2207 static void usbredir_put_packet_id_q(QEMUFile *f, void *priv, size_t unused) 2208 { 2209 struct PacketIdQueue *q = priv; 2210 USBRedirDevice *dev = q->dev; 2211 struct PacketIdQueueEntry *e; 2212 int remain = q->size; 2213 2214 DPRINTF("put_packet_id_q %s size %d\n", q->name, q->size); 2215 qemu_put_be32(f, q->size); 2216 QTAILQ_FOREACH(e, &q->head, next) { 2217 qemu_put_be64(f, e->id); 2218 remain--; 2219 } 2220 assert(remain == 0); 2221 } 2222 2223 static int usbredir_get_packet_id_q(QEMUFile *f, void *priv, size_t unused) 2224 { 2225 struct PacketIdQueue *q = priv; 2226 USBRedirDevice *dev = q->dev; 2227 int i, size; 2228 uint64_t id; 2229 2230 size = qemu_get_be32(f); 2231 DPRINTF("get_packet_id_q %s size %d\n", q->name, size); 2232 for (i = 0; i < size; i++) { 2233 id = qemu_get_be64(f); 2234 packet_id_queue_add(q, id); 2235 } 2236 assert(q->size == size); 2237 return 0; 2238 } 2239 2240 static const VMStateInfo usbredir_ep_packet_id_q_vmstate_info = { 2241 .name = "usb-redir-packet-id-q", 2242 .put = usbredir_put_packet_id_q, 2243 .get = usbredir_get_packet_id_q, 2244 }; 2245 2246 static const VMStateDescription usbredir_ep_packet_id_queue_vmstate = { 2247 .name = "usb-redir-packet-id-queue", 2248 .version_id = 1, 2249 .minimum_version_id = 1, 2250 .fields = (VMStateField[]) { 2251 { 2252 .name = "queue", 2253 .version_id = 0, 2254 .field_exists = NULL, 2255 .size = 0, 2256 .info = &usbredir_ep_packet_id_q_vmstate_info, 2257 .flags = VMS_SINGLE, 2258 .offset = 0, 2259 }, 2260 VMSTATE_END_OF_LIST() 2261 } 2262 }; 2263 2264 2265 /* For usb_redir_device_connect_header migration */ 2266 static const VMStateDescription usbredir_device_info_vmstate = { 2267 .name = "usb-redir-device-info", 2268 .version_id = 1, 2269 .minimum_version_id = 1, 2270 .fields = (VMStateField[]) { 2271 VMSTATE_UINT8(speed, struct usb_redir_device_connect_header), 2272 VMSTATE_UINT8(device_class, struct usb_redir_device_connect_header), 2273 VMSTATE_UINT8(device_subclass, struct usb_redir_device_connect_header), 2274 VMSTATE_UINT8(device_protocol, struct usb_redir_device_connect_header), 2275 VMSTATE_UINT16(vendor_id, struct usb_redir_device_connect_header), 2276 VMSTATE_UINT16(product_id, struct usb_redir_device_connect_header), 2277 VMSTATE_UINT16(device_version_bcd, 2278 struct usb_redir_device_connect_header), 2279 VMSTATE_END_OF_LIST() 2280 } 2281 }; 2282 2283 2284 /* For usb_redir_interface_info_header migration */ 2285 static const VMStateDescription usbredir_interface_info_vmstate = { 2286 .name = "usb-redir-interface-info", 2287 .version_id = 1, 2288 .minimum_version_id = 1, 2289 .fields = (VMStateField[]) { 2290 VMSTATE_UINT32(interface_count, 2291 struct usb_redir_interface_info_header), 2292 VMSTATE_UINT8_ARRAY(interface, 2293 struct usb_redir_interface_info_header, 32), 2294 VMSTATE_UINT8_ARRAY(interface_class, 2295 struct usb_redir_interface_info_header, 32), 2296 VMSTATE_UINT8_ARRAY(interface_subclass, 2297 struct usb_redir_interface_info_header, 32), 2298 VMSTATE_UINT8_ARRAY(interface_protocol, 2299 struct usb_redir_interface_info_header, 32), 2300 VMSTATE_END_OF_LIST() 2301 } 2302 }; 2303 2304 2305 /* And finally the USBRedirDevice vmstate itself */ 2306 static const VMStateDescription usbredir_vmstate = { 2307 .name = "usb-redir", 2308 .version_id = 1, 2309 .minimum_version_id = 1, 2310 .pre_save = usbredir_pre_save, 2311 .post_load = usbredir_post_load, 2312 .fields = (VMStateField[]) { 2313 VMSTATE_USB_DEVICE(dev, USBRedirDevice), 2314 VMSTATE_TIMER(attach_timer, USBRedirDevice), 2315 { 2316 .name = "parser", 2317 .version_id = 0, 2318 .field_exists = NULL, 2319 .size = 0, 2320 .info = &usbredir_parser_vmstate_info, 2321 .flags = VMS_SINGLE, 2322 .offset = 0, 2323 }, 2324 VMSTATE_STRUCT_ARRAY(endpoint, USBRedirDevice, MAX_ENDPOINTS, 1, 2325 usbredir_ep_vmstate, struct endp_data), 2326 VMSTATE_STRUCT(cancelled, USBRedirDevice, 1, 2327 usbredir_ep_packet_id_queue_vmstate, 2328 struct PacketIdQueue), 2329 VMSTATE_STRUCT(already_in_flight, USBRedirDevice, 1, 2330 usbredir_ep_packet_id_queue_vmstate, 2331 struct PacketIdQueue), 2332 VMSTATE_STRUCT(device_info, USBRedirDevice, 1, 2333 usbredir_device_info_vmstate, 2334 struct usb_redir_device_connect_header), 2335 VMSTATE_STRUCT(interface_info, USBRedirDevice, 1, 2336 usbredir_interface_info_vmstate, 2337 struct usb_redir_interface_info_header), 2338 VMSTATE_END_OF_LIST() 2339 } 2340 }; 2341 2342 static Property usbredir_properties[] = { 2343 DEFINE_PROP_CHR("chardev", USBRedirDevice, cs), 2344 DEFINE_PROP_UINT8("debug", USBRedirDevice, debug, usbredirparser_warning), 2345 DEFINE_PROP_STRING("filter", USBRedirDevice, filter_str), 2346 DEFINE_PROP_INT32("bootindex", USBRedirDevice, bootindex, -1), 2347 DEFINE_PROP_END_OF_LIST(), 2348 }; 2349 2350 static void usbredir_class_initfn(ObjectClass *klass, void *data) 2351 { 2352 USBDeviceClass *uc = USB_DEVICE_CLASS(klass); 2353 DeviceClass *dc = DEVICE_CLASS(klass); 2354 2355 uc->init = usbredir_initfn; 2356 uc->product_desc = "USB Redirection Device"; 2357 uc->handle_destroy = usbredir_handle_destroy; 2358 uc->cancel_packet = usbredir_cancel_packet; 2359 uc->handle_reset = usbredir_handle_reset; 2360 uc->handle_data = usbredir_handle_data; 2361 uc->handle_control = usbredir_handle_control; 2362 uc->flush_ep_queue = usbredir_flush_ep_queue; 2363 uc->ep_stopped = usbredir_ep_stopped; 2364 dc->vmsd = &usbredir_vmstate; 2365 dc->props = usbredir_properties; 2366 set_bit(DEVICE_CATEGORY_MISC, dc->categories); 2367 } 2368 2369 static const TypeInfo usbredir_dev_info = { 2370 .name = "usb-redir", 2371 .parent = TYPE_USB_DEVICE, 2372 .instance_size = sizeof(USBRedirDevice), 2373 .class_init = usbredir_class_initfn, 2374 }; 2375 2376 static void usbredir_register_types(void) 2377 { 2378 type_register_static(&usbredir_dev_info); 2379 } 2380 2381 type_init(usbredir_register_types) 2382