1 /* 2 * USB UHCI controller emulation 3 * 4 * Copyright (c) 2005 Fabrice Bellard 5 * 6 * Copyright (c) 2008 Max Krasnyansky 7 * Magor rewrite of the UHCI data structures parser and frame processor 8 * Support for fully async operation and multiple outstanding transactions 9 * 10 * Permission is hereby granted, free of charge, to any person obtaining a copy 11 * of this software and associated documentation files (the "Software"), to deal 12 * in the Software without restriction, including without limitation the rights 13 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 14 * copies of the Software, and to permit persons to whom the Software is 15 * furnished to do so, subject to the following conditions: 16 * 17 * The above copyright notice and this permission notice shall be included in 18 * all copies or substantial portions of the Software. 19 * 20 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 21 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 22 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 23 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 24 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 25 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 26 * THE SOFTWARE. 27 */ 28 29 #include "qemu/osdep.h" 30 #include "hw/usb.h" 31 #include "hw/usb/uhci-regs.h" 32 #include "migration/vmstate.h" 33 #include "hw/pci/pci.h" 34 #include "hw/qdev-properties.h" 35 #include "qapi/error.h" 36 #include "qemu/timer.h" 37 #include "qemu/iov.h" 38 #include "sysemu/dma.h" 39 #include "trace.h" 40 #include "qemu/main-loop.h" 41 #include "qemu/module.h" 42 43 #define FRAME_TIMER_FREQ 1000 44 45 #define FRAME_MAX_LOOPS 256 46 47 /* Must be large enough to handle 10 frame delay for initial isoc requests */ 48 #define QH_VALID 32 49 50 #define MAX_FRAMES_PER_TICK (QH_VALID / 2) 51 52 #define NB_PORTS 2 53 54 enum { 55 TD_RESULT_STOP_FRAME = 10, 56 TD_RESULT_COMPLETE, 57 TD_RESULT_NEXT_QH, 58 TD_RESULT_ASYNC_START, 59 TD_RESULT_ASYNC_CONT, 60 }; 61 62 typedef struct UHCIState UHCIState; 63 typedef struct UHCIAsync UHCIAsync; 64 typedef struct UHCIQueue UHCIQueue; 65 typedef struct UHCIInfo UHCIInfo; 66 typedef struct UHCIPCIDeviceClass UHCIPCIDeviceClass; 67 68 struct UHCIInfo { 69 const char *name; 70 uint16_t vendor_id; 71 uint16_t device_id; 72 uint8_t revision; 73 uint8_t irq_pin; 74 void (*realize)(PCIDevice *dev, Error **errp); 75 bool unplug; 76 }; 77 78 struct UHCIPCIDeviceClass { 79 PCIDeviceClass parent_class; 80 UHCIInfo info; 81 }; 82 83 /* 84 * Pending async transaction. 85 * 'packet' must be the first field because completion 86 * handler does "(UHCIAsync *) pkt" cast. 87 */ 88 89 struct UHCIAsync { 90 USBPacket packet; 91 uint8_t static_buf[64]; /* 64 bytes is enough, except for isoc packets */ 92 uint8_t *buf; 93 UHCIQueue *queue; 94 QTAILQ_ENTRY(UHCIAsync) next; 95 uint32_t td_addr; 96 uint8_t done; 97 }; 98 99 struct UHCIQueue { 100 uint32_t qh_addr; 101 uint32_t token; 102 UHCIState *uhci; 103 USBEndpoint *ep; 104 QTAILQ_ENTRY(UHCIQueue) next; 105 QTAILQ_HEAD(, UHCIAsync) asyncs; 106 int8_t valid; 107 }; 108 109 typedef struct UHCIPort { 110 USBPort port; 111 uint16_t ctrl; 112 } UHCIPort; 113 114 struct UHCIState { 115 PCIDevice dev; 116 MemoryRegion io_bar; 117 USBBus bus; /* Note unused when we're a companion controller */ 118 uint16_t cmd; /* cmd register */ 119 uint16_t status; 120 uint16_t intr; /* interrupt enable register */ 121 uint16_t frnum; /* frame number */ 122 uint32_t fl_base_addr; /* frame list base address */ 123 uint8_t sof_timing; 124 uint8_t status2; /* bit 0 and 1 are used to generate UHCI_STS_USBINT */ 125 int64_t expire_time; 126 QEMUTimer *frame_timer; 127 QEMUBH *bh; 128 uint32_t frame_bytes; 129 uint32_t frame_bandwidth; 130 bool completions_only; 131 UHCIPort ports[NB_PORTS]; 132 133 /* Interrupts that should be raised at the end of the current frame. */ 134 uint32_t pending_int_mask; 135 136 /* Active packets */ 137 QTAILQ_HEAD(, UHCIQueue) queues; 138 uint8_t num_ports_vmstate; 139 140 /* Properties */ 141 char *masterbus; 142 uint32_t firstport; 143 uint32_t maxframes; 144 }; 145 146 typedef struct UHCI_TD { 147 uint32_t link; 148 uint32_t ctrl; /* see TD_CTRL_xxx */ 149 uint32_t token; 150 uint32_t buffer; 151 } UHCI_TD; 152 153 typedef struct UHCI_QH { 154 uint32_t link; 155 uint32_t el_link; 156 } UHCI_QH; 157 158 static void uhci_async_cancel(UHCIAsync *async); 159 static void uhci_queue_fill(UHCIQueue *q, UHCI_TD *td); 160 static void uhci_resume(void *opaque); 161 162 #define TYPE_UHCI "pci-uhci-usb" 163 #define UHCI(obj) OBJECT_CHECK(UHCIState, (obj), TYPE_UHCI) 164 165 static inline int32_t uhci_queue_token(UHCI_TD *td) 166 { 167 if ((td->token & (0xf << 15)) == 0) { 168 /* ctrl ep, cover ep and dev, not pid! */ 169 return td->token & 0x7ff00; 170 } else { 171 /* covers ep, dev, pid -> identifies the endpoint */ 172 return td->token & 0x7ffff; 173 } 174 } 175 176 static UHCIQueue *uhci_queue_new(UHCIState *s, uint32_t qh_addr, UHCI_TD *td, 177 USBEndpoint *ep) 178 { 179 UHCIQueue *queue; 180 181 queue = g_new0(UHCIQueue, 1); 182 queue->uhci = s; 183 queue->qh_addr = qh_addr; 184 queue->token = uhci_queue_token(td); 185 queue->ep = ep; 186 QTAILQ_INIT(&queue->asyncs); 187 QTAILQ_INSERT_HEAD(&s->queues, queue, next); 188 queue->valid = QH_VALID; 189 trace_usb_uhci_queue_add(queue->token); 190 return queue; 191 } 192 193 static void uhci_queue_free(UHCIQueue *queue, const char *reason) 194 { 195 UHCIState *s = queue->uhci; 196 UHCIAsync *async; 197 198 while (!QTAILQ_EMPTY(&queue->asyncs)) { 199 async = QTAILQ_FIRST(&queue->asyncs); 200 uhci_async_cancel(async); 201 } 202 usb_device_ep_stopped(queue->ep->dev, queue->ep); 203 204 trace_usb_uhci_queue_del(queue->token, reason); 205 QTAILQ_REMOVE(&s->queues, queue, next); 206 g_free(queue); 207 } 208 209 static UHCIQueue *uhci_queue_find(UHCIState *s, UHCI_TD *td) 210 { 211 uint32_t token = uhci_queue_token(td); 212 UHCIQueue *queue; 213 214 QTAILQ_FOREACH(queue, &s->queues, next) { 215 if (queue->token == token) { 216 return queue; 217 } 218 } 219 return NULL; 220 } 221 222 static bool uhci_queue_verify(UHCIQueue *queue, uint32_t qh_addr, UHCI_TD *td, 223 uint32_t td_addr, bool queuing) 224 { 225 UHCIAsync *first = QTAILQ_FIRST(&queue->asyncs); 226 uint32_t queue_token_addr = (queue->token >> 8) & 0x7f; 227 228 return queue->qh_addr == qh_addr && 229 queue->token == uhci_queue_token(td) && 230 queue_token_addr == queue->ep->dev->addr && 231 (queuing || !(td->ctrl & TD_CTRL_ACTIVE) || first == NULL || 232 first->td_addr == td_addr); 233 } 234 235 static UHCIAsync *uhci_async_alloc(UHCIQueue *queue, uint32_t td_addr) 236 { 237 UHCIAsync *async = g_new0(UHCIAsync, 1); 238 239 async->queue = queue; 240 async->td_addr = td_addr; 241 usb_packet_init(&async->packet); 242 trace_usb_uhci_packet_add(async->queue->token, async->td_addr); 243 244 return async; 245 } 246 247 static void uhci_async_free(UHCIAsync *async) 248 { 249 trace_usb_uhci_packet_del(async->queue->token, async->td_addr); 250 usb_packet_cleanup(&async->packet); 251 if (async->buf != async->static_buf) { 252 g_free(async->buf); 253 } 254 g_free(async); 255 } 256 257 static void uhci_async_link(UHCIAsync *async) 258 { 259 UHCIQueue *queue = async->queue; 260 QTAILQ_INSERT_TAIL(&queue->asyncs, async, next); 261 trace_usb_uhci_packet_link_async(async->queue->token, async->td_addr); 262 } 263 264 static void uhci_async_unlink(UHCIAsync *async) 265 { 266 UHCIQueue *queue = async->queue; 267 QTAILQ_REMOVE(&queue->asyncs, async, next); 268 trace_usb_uhci_packet_unlink_async(async->queue->token, async->td_addr); 269 } 270 271 static void uhci_async_cancel(UHCIAsync *async) 272 { 273 uhci_async_unlink(async); 274 trace_usb_uhci_packet_cancel(async->queue->token, async->td_addr, 275 async->done); 276 if (!async->done) 277 usb_cancel_packet(&async->packet); 278 uhci_async_free(async); 279 } 280 281 /* 282 * Mark all outstanding async packets as invalid. 283 * This is used for canceling them when TDs are removed by the HCD. 284 */ 285 static void uhci_async_validate_begin(UHCIState *s) 286 { 287 UHCIQueue *queue; 288 289 QTAILQ_FOREACH(queue, &s->queues, next) { 290 queue->valid--; 291 } 292 } 293 294 /* 295 * Cancel async packets that are no longer valid 296 */ 297 static void uhci_async_validate_end(UHCIState *s) 298 { 299 UHCIQueue *queue, *n; 300 301 QTAILQ_FOREACH_SAFE(queue, &s->queues, next, n) { 302 if (!queue->valid) { 303 uhci_queue_free(queue, "validate-end"); 304 } 305 } 306 } 307 308 static void uhci_async_cancel_device(UHCIState *s, USBDevice *dev) 309 { 310 UHCIQueue *queue, *n; 311 312 QTAILQ_FOREACH_SAFE(queue, &s->queues, next, n) { 313 if (queue->ep->dev == dev) { 314 uhci_queue_free(queue, "cancel-device"); 315 } 316 } 317 } 318 319 static void uhci_async_cancel_all(UHCIState *s) 320 { 321 UHCIQueue *queue, *nq; 322 323 QTAILQ_FOREACH_SAFE(queue, &s->queues, next, nq) { 324 uhci_queue_free(queue, "cancel-all"); 325 } 326 } 327 328 static UHCIAsync *uhci_async_find_td(UHCIState *s, uint32_t td_addr) 329 { 330 UHCIQueue *queue; 331 UHCIAsync *async; 332 333 QTAILQ_FOREACH(queue, &s->queues, next) { 334 QTAILQ_FOREACH(async, &queue->asyncs, next) { 335 if (async->td_addr == td_addr) { 336 return async; 337 } 338 } 339 } 340 return NULL; 341 } 342 343 static void uhci_update_irq(UHCIState *s) 344 { 345 int level; 346 if (((s->status2 & 1) && (s->intr & (1 << 2))) || 347 ((s->status2 & 2) && (s->intr & (1 << 3))) || 348 ((s->status & UHCI_STS_USBERR) && (s->intr & (1 << 0))) || 349 ((s->status & UHCI_STS_RD) && (s->intr & (1 << 1))) || 350 (s->status & UHCI_STS_HSERR) || 351 (s->status & UHCI_STS_HCPERR)) { 352 level = 1; 353 } else { 354 level = 0; 355 } 356 pci_set_irq(&s->dev, level); 357 } 358 359 static void uhci_reset(DeviceState *dev) 360 { 361 PCIDevice *d = PCI_DEVICE(dev); 362 UHCIState *s = UHCI(d); 363 uint8_t *pci_conf; 364 int i; 365 UHCIPort *port; 366 367 trace_usb_uhci_reset(); 368 369 pci_conf = s->dev.config; 370 371 pci_conf[0x6a] = 0x01; /* usb clock */ 372 pci_conf[0x6b] = 0x00; 373 s->cmd = 0; 374 s->status = UHCI_STS_HCHALTED; 375 s->status2 = 0; 376 s->intr = 0; 377 s->fl_base_addr = 0; 378 s->sof_timing = 64; 379 380 for(i = 0; i < NB_PORTS; i++) { 381 port = &s->ports[i]; 382 port->ctrl = 0x0080; 383 if (port->port.dev && port->port.dev->attached) { 384 usb_port_reset(&port->port); 385 } 386 } 387 388 uhci_async_cancel_all(s); 389 qemu_bh_cancel(s->bh); 390 uhci_update_irq(s); 391 } 392 393 static const VMStateDescription vmstate_uhci_port = { 394 .name = "uhci port", 395 .version_id = 1, 396 .minimum_version_id = 1, 397 .fields = (VMStateField[]) { 398 VMSTATE_UINT16(ctrl, UHCIPort), 399 VMSTATE_END_OF_LIST() 400 } 401 }; 402 403 static int uhci_post_load(void *opaque, int version_id) 404 { 405 UHCIState *s = opaque; 406 407 if (version_id < 2) { 408 s->expire_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 409 (NANOSECONDS_PER_SECOND / FRAME_TIMER_FREQ); 410 } 411 return 0; 412 } 413 414 static const VMStateDescription vmstate_uhci = { 415 .name = "uhci", 416 .version_id = 3, 417 .minimum_version_id = 1, 418 .post_load = uhci_post_load, 419 .fields = (VMStateField[]) { 420 VMSTATE_PCI_DEVICE(dev, UHCIState), 421 VMSTATE_UINT8_EQUAL(num_ports_vmstate, UHCIState, NULL), 422 VMSTATE_STRUCT_ARRAY(ports, UHCIState, NB_PORTS, 1, 423 vmstate_uhci_port, UHCIPort), 424 VMSTATE_UINT16(cmd, UHCIState), 425 VMSTATE_UINT16(status, UHCIState), 426 VMSTATE_UINT16(intr, UHCIState), 427 VMSTATE_UINT16(frnum, UHCIState), 428 VMSTATE_UINT32(fl_base_addr, UHCIState), 429 VMSTATE_UINT8(sof_timing, UHCIState), 430 VMSTATE_UINT8(status2, UHCIState), 431 VMSTATE_TIMER_PTR(frame_timer, UHCIState), 432 VMSTATE_INT64_V(expire_time, UHCIState, 2), 433 VMSTATE_UINT32_V(pending_int_mask, UHCIState, 3), 434 VMSTATE_END_OF_LIST() 435 } 436 }; 437 438 static void uhci_port_write(void *opaque, hwaddr addr, 439 uint64_t val, unsigned size) 440 { 441 UHCIState *s = opaque; 442 443 trace_usb_uhci_mmio_writew(addr, val); 444 445 switch(addr) { 446 case 0x00: 447 if ((val & UHCI_CMD_RS) && !(s->cmd & UHCI_CMD_RS)) { 448 /* start frame processing */ 449 trace_usb_uhci_schedule_start(); 450 s->expire_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 451 (NANOSECONDS_PER_SECOND / FRAME_TIMER_FREQ); 452 timer_mod(s->frame_timer, s->expire_time); 453 s->status &= ~UHCI_STS_HCHALTED; 454 } else if (!(val & UHCI_CMD_RS)) { 455 s->status |= UHCI_STS_HCHALTED; 456 } 457 if (val & UHCI_CMD_GRESET) { 458 UHCIPort *port; 459 int i; 460 461 /* send reset on the USB bus */ 462 for(i = 0; i < NB_PORTS; i++) { 463 port = &s->ports[i]; 464 usb_device_reset(port->port.dev); 465 } 466 uhci_reset(DEVICE(s)); 467 return; 468 } 469 if (val & UHCI_CMD_HCRESET) { 470 uhci_reset(DEVICE(s)); 471 return; 472 } 473 s->cmd = val; 474 if (val & UHCI_CMD_EGSM) { 475 if ((s->ports[0].ctrl & UHCI_PORT_RD) || 476 (s->ports[1].ctrl & UHCI_PORT_RD)) { 477 uhci_resume(s); 478 } 479 } 480 break; 481 case 0x02: 482 s->status &= ~val; 483 /* XXX: the chip spec is not coherent, so we add a hidden 484 register to distinguish between IOC and SPD */ 485 if (val & UHCI_STS_USBINT) 486 s->status2 = 0; 487 uhci_update_irq(s); 488 break; 489 case 0x04: 490 s->intr = val; 491 uhci_update_irq(s); 492 break; 493 case 0x06: 494 if (s->status & UHCI_STS_HCHALTED) 495 s->frnum = val & 0x7ff; 496 break; 497 case 0x08: 498 s->fl_base_addr &= 0xffff0000; 499 s->fl_base_addr |= val & ~0xfff; 500 break; 501 case 0x0a: 502 s->fl_base_addr &= 0x0000ffff; 503 s->fl_base_addr |= (val << 16); 504 break; 505 case 0x0c: 506 s->sof_timing = val & 0xff; 507 break; 508 case 0x10 ... 0x1f: 509 { 510 UHCIPort *port; 511 USBDevice *dev; 512 int n; 513 514 n = (addr >> 1) & 7; 515 if (n >= NB_PORTS) 516 return; 517 port = &s->ports[n]; 518 dev = port->port.dev; 519 if (dev && dev->attached) { 520 /* port reset */ 521 if ( (val & UHCI_PORT_RESET) && 522 !(port->ctrl & UHCI_PORT_RESET) ) { 523 usb_device_reset(dev); 524 } 525 } 526 port->ctrl &= UHCI_PORT_READ_ONLY; 527 /* enabled may only be set if a device is connected */ 528 if (!(port->ctrl & UHCI_PORT_CCS)) { 529 val &= ~UHCI_PORT_EN; 530 } 531 port->ctrl |= (val & ~UHCI_PORT_READ_ONLY); 532 /* some bits are reset when a '1' is written to them */ 533 port->ctrl &= ~(val & UHCI_PORT_WRITE_CLEAR); 534 } 535 break; 536 } 537 } 538 539 static uint64_t uhci_port_read(void *opaque, hwaddr addr, unsigned size) 540 { 541 UHCIState *s = opaque; 542 uint32_t val; 543 544 switch(addr) { 545 case 0x00: 546 val = s->cmd; 547 break; 548 case 0x02: 549 val = s->status; 550 break; 551 case 0x04: 552 val = s->intr; 553 break; 554 case 0x06: 555 val = s->frnum; 556 break; 557 case 0x08: 558 val = s->fl_base_addr & 0xffff; 559 break; 560 case 0x0a: 561 val = (s->fl_base_addr >> 16) & 0xffff; 562 break; 563 case 0x0c: 564 val = s->sof_timing; 565 break; 566 case 0x10 ... 0x1f: 567 { 568 UHCIPort *port; 569 int n; 570 n = (addr >> 1) & 7; 571 if (n >= NB_PORTS) 572 goto read_default; 573 port = &s->ports[n]; 574 val = port->ctrl; 575 } 576 break; 577 default: 578 read_default: 579 val = 0xff7f; /* disabled port */ 580 break; 581 } 582 583 trace_usb_uhci_mmio_readw(addr, val); 584 585 return val; 586 } 587 588 /* signal resume if controller suspended */ 589 static void uhci_resume (void *opaque) 590 { 591 UHCIState *s = (UHCIState *)opaque; 592 593 if (!s) 594 return; 595 596 if (s->cmd & UHCI_CMD_EGSM) { 597 s->cmd |= UHCI_CMD_FGR; 598 s->status |= UHCI_STS_RD; 599 uhci_update_irq(s); 600 } 601 } 602 603 static void uhci_attach(USBPort *port1) 604 { 605 UHCIState *s = port1->opaque; 606 UHCIPort *port = &s->ports[port1->index]; 607 608 /* set connect status */ 609 port->ctrl |= UHCI_PORT_CCS | UHCI_PORT_CSC; 610 611 /* update speed */ 612 if (port->port.dev->speed == USB_SPEED_LOW) { 613 port->ctrl |= UHCI_PORT_LSDA; 614 } else { 615 port->ctrl &= ~UHCI_PORT_LSDA; 616 } 617 618 uhci_resume(s); 619 } 620 621 static void uhci_detach(USBPort *port1) 622 { 623 UHCIState *s = port1->opaque; 624 UHCIPort *port = &s->ports[port1->index]; 625 626 uhci_async_cancel_device(s, port1->dev); 627 628 /* set connect status */ 629 if (port->ctrl & UHCI_PORT_CCS) { 630 port->ctrl &= ~UHCI_PORT_CCS; 631 port->ctrl |= UHCI_PORT_CSC; 632 } 633 /* disable port */ 634 if (port->ctrl & UHCI_PORT_EN) { 635 port->ctrl &= ~UHCI_PORT_EN; 636 port->ctrl |= UHCI_PORT_ENC; 637 } 638 639 uhci_resume(s); 640 } 641 642 static void uhci_child_detach(USBPort *port1, USBDevice *child) 643 { 644 UHCIState *s = port1->opaque; 645 646 uhci_async_cancel_device(s, child); 647 } 648 649 static void uhci_wakeup(USBPort *port1) 650 { 651 UHCIState *s = port1->opaque; 652 UHCIPort *port = &s->ports[port1->index]; 653 654 if (port->ctrl & UHCI_PORT_SUSPEND && !(port->ctrl & UHCI_PORT_RD)) { 655 port->ctrl |= UHCI_PORT_RD; 656 uhci_resume(s); 657 } 658 } 659 660 static USBDevice *uhci_find_device(UHCIState *s, uint8_t addr) 661 { 662 USBDevice *dev; 663 int i; 664 665 for (i = 0; i < NB_PORTS; i++) { 666 UHCIPort *port = &s->ports[i]; 667 if (!(port->ctrl & UHCI_PORT_EN)) { 668 continue; 669 } 670 dev = usb_find_device(&port->port, addr); 671 if (dev != NULL) { 672 return dev; 673 } 674 } 675 return NULL; 676 } 677 678 static void uhci_read_td(UHCIState *s, UHCI_TD *td, uint32_t link) 679 { 680 pci_dma_read(&s->dev, link & ~0xf, td, sizeof(*td)); 681 le32_to_cpus(&td->link); 682 le32_to_cpus(&td->ctrl); 683 le32_to_cpus(&td->token); 684 le32_to_cpus(&td->buffer); 685 } 686 687 static int uhci_handle_td_error(UHCIState *s, UHCI_TD *td, uint32_t td_addr, 688 int status, uint32_t *int_mask) 689 { 690 uint32_t queue_token = uhci_queue_token(td); 691 int ret; 692 693 switch (status) { 694 case USB_RET_NAK: 695 td->ctrl |= TD_CTRL_NAK; 696 return TD_RESULT_NEXT_QH; 697 698 case USB_RET_STALL: 699 td->ctrl |= TD_CTRL_STALL; 700 trace_usb_uhci_packet_complete_stall(queue_token, td_addr); 701 ret = TD_RESULT_NEXT_QH; 702 break; 703 704 case USB_RET_BABBLE: 705 td->ctrl |= TD_CTRL_BABBLE | TD_CTRL_STALL; 706 /* frame interrupted */ 707 trace_usb_uhci_packet_complete_babble(queue_token, td_addr); 708 ret = TD_RESULT_STOP_FRAME; 709 break; 710 711 case USB_RET_IOERROR: 712 case USB_RET_NODEV: 713 default: 714 td->ctrl |= TD_CTRL_TIMEOUT; 715 td->ctrl &= ~(3 << TD_CTRL_ERROR_SHIFT); 716 trace_usb_uhci_packet_complete_error(queue_token, td_addr); 717 ret = TD_RESULT_NEXT_QH; 718 break; 719 } 720 721 td->ctrl &= ~TD_CTRL_ACTIVE; 722 s->status |= UHCI_STS_USBERR; 723 if (td->ctrl & TD_CTRL_IOC) { 724 *int_mask |= 0x01; 725 } 726 uhci_update_irq(s); 727 return ret; 728 } 729 730 static int uhci_complete_td(UHCIState *s, UHCI_TD *td, UHCIAsync *async, uint32_t *int_mask) 731 { 732 int len = 0, max_len; 733 uint8_t pid; 734 735 max_len = ((td->token >> 21) + 1) & 0x7ff; 736 pid = td->token & 0xff; 737 738 if (td->ctrl & TD_CTRL_IOS) 739 td->ctrl &= ~TD_CTRL_ACTIVE; 740 741 if (async->packet.status != USB_RET_SUCCESS) { 742 return uhci_handle_td_error(s, td, async->td_addr, 743 async->packet.status, int_mask); 744 } 745 746 len = async->packet.actual_length; 747 td->ctrl = (td->ctrl & ~0x7ff) | ((len - 1) & 0x7ff); 748 749 /* The NAK bit may have been set by a previous frame, so clear it 750 here. The docs are somewhat unclear, but win2k relies on this 751 behavior. */ 752 td->ctrl &= ~(TD_CTRL_ACTIVE | TD_CTRL_NAK); 753 if (td->ctrl & TD_CTRL_IOC) 754 *int_mask |= 0x01; 755 756 if (pid == USB_TOKEN_IN) { 757 pci_dma_write(&s->dev, td->buffer, async->buf, len); 758 if ((td->ctrl & TD_CTRL_SPD) && len < max_len) { 759 *int_mask |= 0x02; 760 /* short packet: do not update QH */ 761 trace_usb_uhci_packet_complete_shortxfer(async->queue->token, 762 async->td_addr); 763 return TD_RESULT_NEXT_QH; 764 } 765 } 766 767 /* success */ 768 trace_usb_uhci_packet_complete_success(async->queue->token, 769 async->td_addr); 770 return TD_RESULT_COMPLETE; 771 } 772 773 static int uhci_handle_td(UHCIState *s, UHCIQueue *q, uint32_t qh_addr, 774 UHCI_TD *td, uint32_t td_addr, uint32_t *int_mask) 775 { 776 int ret, max_len; 777 bool spd; 778 bool queuing = (q != NULL); 779 uint8_t pid = td->token & 0xff; 780 UHCIAsync *async; 781 782 async = uhci_async_find_td(s, td_addr); 783 if (async) { 784 if (uhci_queue_verify(async->queue, qh_addr, td, td_addr, queuing)) { 785 assert(q == NULL || q == async->queue); 786 q = async->queue; 787 } else { 788 uhci_queue_free(async->queue, "guest re-used pending td"); 789 async = NULL; 790 } 791 } 792 793 if (q == NULL) { 794 q = uhci_queue_find(s, td); 795 if (q && !uhci_queue_verify(q, qh_addr, td, td_addr, queuing)) { 796 uhci_queue_free(q, "guest re-used qh"); 797 q = NULL; 798 } 799 } 800 801 if (q) { 802 q->valid = QH_VALID; 803 } 804 805 /* Is active ? */ 806 if (!(td->ctrl & TD_CTRL_ACTIVE)) { 807 if (async) { 808 /* Guest marked a pending td non-active, cancel the queue */ 809 uhci_queue_free(async->queue, "pending td non-active"); 810 } 811 /* 812 * ehci11d spec page 22: "Even if the Active bit in the TD is already 813 * cleared when the TD is fetched ... an IOC interrupt is generated" 814 */ 815 if (td->ctrl & TD_CTRL_IOC) { 816 *int_mask |= 0x01; 817 } 818 return TD_RESULT_NEXT_QH; 819 } 820 821 switch (pid) { 822 case USB_TOKEN_OUT: 823 case USB_TOKEN_SETUP: 824 case USB_TOKEN_IN: 825 break; 826 default: 827 /* invalid pid : frame interrupted */ 828 s->status |= UHCI_STS_HCPERR; 829 s->cmd &= ~UHCI_CMD_RS; 830 uhci_update_irq(s); 831 return TD_RESULT_STOP_FRAME; 832 } 833 834 if (async) { 835 if (queuing) { 836 /* we are busy filling the queue, we are not prepared 837 to consume completed packages then, just leave them 838 in async state */ 839 return TD_RESULT_ASYNC_CONT; 840 } 841 if (!async->done) { 842 UHCI_TD last_td; 843 UHCIAsync *last = QTAILQ_LAST(&async->queue->asyncs); 844 /* 845 * While we are waiting for the current td to complete, the guest 846 * may have added more tds to the queue. Note we re-read the td 847 * rather then caching it, as we want to see guest made changes! 848 */ 849 uhci_read_td(s, &last_td, last->td_addr); 850 uhci_queue_fill(async->queue, &last_td); 851 852 return TD_RESULT_ASYNC_CONT; 853 } 854 uhci_async_unlink(async); 855 goto done; 856 } 857 858 if (s->completions_only) { 859 return TD_RESULT_ASYNC_CONT; 860 } 861 862 /* Allocate new packet */ 863 if (q == NULL) { 864 USBDevice *dev; 865 USBEndpoint *ep; 866 867 dev = uhci_find_device(s, (td->token >> 8) & 0x7f); 868 if (dev == NULL) { 869 return uhci_handle_td_error(s, td, td_addr, USB_RET_NODEV, 870 int_mask); 871 } 872 ep = usb_ep_get(dev, pid, (td->token >> 15) & 0xf); 873 q = uhci_queue_new(s, qh_addr, td, ep); 874 } 875 async = uhci_async_alloc(q, td_addr); 876 877 max_len = ((td->token >> 21) + 1) & 0x7ff; 878 spd = (pid == USB_TOKEN_IN && (td->ctrl & TD_CTRL_SPD) != 0); 879 usb_packet_setup(&async->packet, pid, q->ep, 0, td_addr, spd, 880 (td->ctrl & TD_CTRL_IOC) != 0); 881 if (max_len <= sizeof(async->static_buf)) { 882 async->buf = async->static_buf; 883 } else { 884 async->buf = g_malloc(max_len); 885 } 886 usb_packet_addbuf(&async->packet, async->buf, max_len); 887 888 switch(pid) { 889 case USB_TOKEN_OUT: 890 case USB_TOKEN_SETUP: 891 pci_dma_read(&s->dev, td->buffer, async->buf, max_len); 892 usb_handle_packet(q->ep->dev, &async->packet); 893 if (async->packet.status == USB_RET_SUCCESS) { 894 async->packet.actual_length = max_len; 895 } 896 break; 897 898 case USB_TOKEN_IN: 899 usb_handle_packet(q->ep->dev, &async->packet); 900 break; 901 902 default: 903 abort(); /* Never to execute */ 904 } 905 906 if (async->packet.status == USB_RET_ASYNC) { 907 uhci_async_link(async); 908 if (!queuing) { 909 uhci_queue_fill(q, td); 910 } 911 return TD_RESULT_ASYNC_START; 912 } 913 914 done: 915 ret = uhci_complete_td(s, td, async, int_mask); 916 uhci_async_free(async); 917 return ret; 918 } 919 920 static void uhci_async_complete(USBPort *port, USBPacket *packet) 921 { 922 UHCIAsync *async = container_of(packet, UHCIAsync, packet); 923 UHCIState *s = async->queue->uhci; 924 925 if (packet->status == USB_RET_REMOVE_FROM_QUEUE) { 926 uhci_async_cancel(async); 927 return; 928 } 929 930 async->done = 1; 931 /* Force processing of this packet *now*, needed for migration */ 932 s->completions_only = true; 933 qemu_bh_schedule(s->bh); 934 } 935 936 static int is_valid(uint32_t link) 937 { 938 return (link & 1) == 0; 939 } 940 941 static int is_qh(uint32_t link) 942 { 943 return (link & 2) != 0; 944 } 945 946 static int depth_first(uint32_t link) 947 { 948 return (link & 4) != 0; 949 } 950 951 /* QH DB used for detecting QH loops */ 952 #define UHCI_MAX_QUEUES 128 953 typedef struct { 954 uint32_t addr[UHCI_MAX_QUEUES]; 955 int count; 956 } QhDb; 957 958 static void qhdb_reset(QhDb *db) 959 { 960 db->count = 0; 961 } 962 963 /* Add QH to DB. Returns 1 if already present or DB is full. */ 964 static int qhdb_insert(QhDb *db, uint32_t addr) 965 { 966 int i; 967 for (i = 0; i < db->count; i++) 968 if (db->addr[i] == addr) 969 return 1; 970 971 if (db->count >= UHCI_MAX_QUEUES) 972 return 1; 973 974 db->addr[db->count++] = addr; 975 return 0; 976 } 977 978 static void uhci_queue_fill(UHCIQueue *q, UHCI_TD *td) 979 { 980 uint32_t int_mask = 0; 981 uint32_t plink = td->link; 982 UHCI_TD ptd; 983 int ret; 984 985 while (is_valid(plink)) { 986 uhci_read_td(q->uhci, &ptd, plink); 987 if (!(ptd.ctrl & TD_CTRL_ACTIVE)) { 988 break; 989 } 990 if (uhci_queue_token(&ptd) != q->token) { 991 break; 992 } 993 trace_usb_uhci_td_queue(plink & ~0xf, ptd.ctrl, ptd.token); 994 ret = uhci_handle_td(q->uhci, q, q->qh_addr, &ptd, plink, &int_mask); 995 if (ret == TD_RESULT_ASYNC_CONT) { 996 break; 997 } 998 assert(ret == TD_RESULT_ASYNC_START); 999 assert(int_mask == 0); 1000 plink = ptd.link; 1001 } 1002 usb_device_flush_ep_queue(q->ep->dev, q->ep); 1003 } 1004 1005 static void uhci_process_frame(UHCIState *s) 1006 { 1007 uint32_t frame_addr, link, old_td_ctrl, val, int_mask; 1008 uint32_t curr_qh, td_count = 0; 1009 int cnt, ret; 1010 UHCI_TD td; 1011 UHCI_QH qh; 1012 QhDb qhdb; 1013 1014 frame_addr = s->fl_base_addr + ((s->frnum & 0x3ff) << 2); 1015 1016 pci_dma_read(&s->dev, frame_addr, &link, 4); 1017 le32_to_cpus(&link); 1018 1019 int_mask = 0; 1020 curr_qh = 0; 1021 1022 qhdb_reset(&qhdb); 1023 1024 for (cnt = FRAME_MAX_LOOPS; is_valid(link) && cnt; cnt--) { 1025 if (!s->completions_only && s->frame_bytes >= s->frame_bandwidth) { 1026 /* We've reached the usb 1.1 bandwidth, which is 1027 1280 bytes/frame, stop processing */ 1028 trace_usb_uhci_frame_stop_bandwidth(); 1029 break; 1030 } 1031 if (is_qh(link)) { 1032 /* QH */ 1033 trace_usb_uhci_qh_load(link & ~0xf); 1034 1035 if (qhdb_insert(&qhdb, link)) { 1036 /* 1037 * We're going in circles. Which is not a bug because 1038 * HCD is allowed to do that as part of the BW management. 1039 * 1040 * Stop processing here if no transaction has been done 1041 * since we've been here last time. 1042 */ 1043 if (td_count == 0) { 1044 trace_usb_uhci_frame_loop_stop_idle(); 1045 break; 1046 } else { 1047 trace_usb_uhci_frame_loop_continue(); 1048 td_count = 0; 1049 qhdb_reset(&qhdb); 1050 qhdb_insert(&qhdb, link); 1051 } 1052 } 1053 1054 pci_dma_read(&s->dev, link & ~0xf, &qh, sizeof(qh)); 1055 le32_to_cpus(&qh.link); 1056 le32_to_cpus(&qh.el_link); 1057 1058 if (!is_valid(qh.el_link)) { 1059 /* QH w/o elements */ 1060 curr_qh = 0; 1061 link = qh.link; 1062 } else { 1063 /* QH with elements */ 1064 curr_qh = link; 1065 link = qh.el_link; 1066 } 1067 continue; 1068 } 1069 1070 /* TD */ 1071 uhci_read_td(s, &td, link); 1072 trace_usb_uhci_td_load(curr_qh & ~0xf, link & ~0xf, td.ctrl, td.token); 1073 1074 old_td_ctrl = td.ctrl; 1075 ret = uhci_handle_td(s, NULL, curr_qh, &td, link, &int_mask); 1076 if (old_td_ctrl != td.ctrl) { 1077 /* update the status bits of the TD */ 1078 val = cpu_to_le32(td.ctrl); 1079 pci_dma_write(&s->dev, (link & ~0xf) + 4, &val, sizeof(val)); 1080 } 1081 1082 switch (ret) { 1083 case TD_RESULT_STOP_FRAME: /* interrupted frame */ 1084 goto out; 1085 1086 case TD_RESULT_NEXT_QH: 1087 case TD_RESULT_ASYNC_CONT: 1088 trace_usb_uhci_td_nextqh(curr_qh & ~0xf, link & ~0xf); 1089 link = curr_qh ? qh.link : td.link; 1090 continue; 1091 1092 case TD_RESULT_ASYNC_START: 1093 trace_usb_uhci_td_async(curr_qh & ~0xf, link & ~0xf); 1094 link = curr_qh ? qh.link : td.link; 1095 continue; 1096 1097 case TD_RESULT_COMPLETE: 1098 trace_usb_uhci_td_complete(curr_qh & ~0xf, link & ~0xf); 1099 link = td.link; 1100 td_count++; 1101 s->frame_bytes += (td.ctrl & 0x7ff) + 1; 1102 1103 if (curr_qh) { 1104 /* update QH element link */ 1105 qh.el_link = link; 1106 val = cpu_to_le32(qh.el_link); 1107 pci_dma_write(&s->dev, (curr_qh & ~0xf) + 4, &val, sizeof(val)); 1108 1109 if (!depth_first(link)) { 1110 /* done with this QH */ 1111 curr_qh = 0; 1112 link = qh.link; 1113 } 1114 } 1115 break; 1116 1117 default: 1118 assert(!"unknown return code"); 1119 } 1120 1121 /* go to the next entry */ 1122 } 1123 1124 out: 1125 s->pending_int_mask |= int_mask; 1126 } 1127 1128 static void uhci_bh(void *opaque) 1129 { 1130 UHCIState *s = opaque; 1131 uhci_process_frame(s); 1132 } 1133 1134 static void uhci_frame_timer(void *opaque) 1135 { 1136 UHCIState *s = opaque; 1137 uint64_t t_now, t_last_run; 1138 int i, frames; 1139 const uint64_t frame_t = NANOSECONDS_PER_SECOND / FRAME_TIMER_FREQ; 1140 1141 s->completions_only = false; 1142 qemu_bh_cancel(s->bh); 1143 1144 if (!(s->cmd & UHCI_CMD_RS)) { 1145 /* Full stop */ 1146 trace_usb_uhci_schedule_stop(); 1147 timer_del(s->frame_timer); 1148 uhci_async_cancel_all(s); 1149 /* set hchalted bit in status - UHCI11D 2.1.2 */ 1150 s->status |= UHCI_STS_HCHALTED; 1151 return; 1152 } 1153 1154 /* We still store expire_time in our state, for migration */ 1155 t_last_run = s->expire_time - frame_t; 1156 t_now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); 1157 1158 /* Process up to MAX_FRAMES_PER_TICK frames */ 1159 frames = (t_now - t_last_run) / frame_t; 1160 if (frames > s->maxframes) { 1161 int skipped = frames - s->maxframes; 1162 s->expire_time += skipped * frame_t; 1163 s->frnum = (s->frnum + skipped) & 0x7ff; 1164 frames -= skipped; 1165 } 1166 if (frames > MAX_FRAMES_PER_TICK) { 1167 frames = MAX_FRAMES_PER_TICK; 1168 } 1169 1170 for (i = 0; i < frames; i++) { 1171 s->frame_bytes = 0; 1172 trace_usb_uhci_frame_start(s->frnum); 1173 uhci_async_validate_begin(s); 1174 uhci_process_frame(s); 1175 uhci_async_validate_end(s); 1176 /* The spec says frnum is the frame currently being processed, and 1177 * the guest must look at frnum - 1 on interrupt, so inc frnum now */ 1178 s->frnum = (s->frnum + 1) & 0x7ff; 1179 s->expire_time += frame_t; 1180 } 1181 1182 /* Complete the previous frame(s) */ 1183 if (s->pending_int_mask) { 1184 s->status2 |= s->pending_int_mask; 1185 s->status |= UHCI_STS_USBINT; 1186 uhci_update_irq(s); 1187 } 1188 s->pending_int_mask = 0; 1189 1190 timer_mod(s->frame_timer, t_now + frame_t); 1191 } 1192 1193 static const MemoryRegionOps uhci_ioport_ops = { 1194 .read = uhci_port_read, 1195 .write = uhci_port_write, 1196 .valid.min_access_size = 1, 1197 .valid.max_access_size = 4, 1198 .impl.min_access_size = 2, 1199 .impl.max_access_size = 2, 1200 .endianness = DEVICE_LITTLE_ENDIAN, 1201 }; 1202 1203 static USBPortOps uhci_port_ops = { 1204 .attach = uhci_attach, 1205 .detach = uhci_detach, 1206 .child_detach = uhci_child_detach, 1207 .wakeup = uhci_wakeup, 1208 .complete = uhci_async_complete, 1209 }; 1210 1211 static USBBusOps uhci_bus_ops = { 1212 }; 1213 1214 static void usb_uhci_common_realize(PCIDevice *dev, Error **errp) 1215 { 1216 Error *err = NULL; 1217 PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(dev); 1218 UHCIPCIDeviceClass *u = container_of(pc, UHCIPCIDeviceClass, parent_class); 1219 UHCIState *s = UHCI(dev); 1220 uint8_t *pci_conf = s->dev.config; 1221 int i; 1222 1223 pci_conf[PCI_CLASS_PROG] = 0x00; 1224 /* TODO: reset value should be 0. */ 1225 pci_conf[USB_SBRN] = USB_RELEASE_1; // release number 1226 1227 pci_config_set_interrupt_pin(pci_conf, u->info.irq_pin + 1); 1228 1229 if (s->masterbus) { 1230 USBPort *ports[NB_PORTS]; 1231 for(i = 0; i < NB_PORTS; i++) { 1232 ports[i] = &s->ports[i].port; 1233 } 1234 usb_register_companion(s->masterbus, ports, NB_PORTS, 1235 s->firstport, s, &uhci_port_ops, 1236 USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL, 1237 &err); 1238 if (err) { 1239 error_propagate(errp, err); 1240 return; 1241 } 1242 } else { 1243 usb_bus_new(&s->bus, sizeof(s->bus), &uhci_bus_ops, DEVICE(dev)); 1244 for (i = 0; i < NB_PORTS; i++) { 1245 usb_register_port(&s->bus, &s->ports[i].port, s, i, &uhci_port_ops, 1246 USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL); 1247 } 1248 } 1249 s->bh = qemu_bh_new(uhci_bh, s); 1250 s->frame_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, uhci_frame_timer, s); 1251 s->num_ports_vmstate = NB_PORTS; 1252 QTAILQ_INIT(&s->queues); 1253 1254 memory_region_init_io(&s->io_bar, OBJECT(s), &uhci_ioport_ops, s, 1255 "uhci", 0x20); 1256 1257 /* Use region 4 for consistency with real hardware. BSD guests seem 1258 to rely on this. */ 1259 pci_register_bar(&s->dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &s->io_bar); 1260 } 1261 1262 static void usb_uhci_vt82c686b_realize(PCIDevice *dev, Error **errp) 1263 { 1264 UHCIState *s = UHCI(dev); 1265 uint8_t *pci_conf = s->dev.config; 1266 1267 /* USB misc control 1/2 */ 1268 pci_set_long(pci_conf + 0x40,0x00001000); 1269 /* PM capability */ 1270 pci_set_long(pci_conf + 0x80,0x00020001); 1271 /* USB legacy support */ 1272 pci_set_long(pci_conf + 0xc0,0x00002000); 1273 1274 usb_uhci_common_realize(dev, errp); 1275 } 1276 1277 static void usb_uhci_exit(PCIDevice *dev) 1278 { 1279 UHCIState *s = UHCI(dev); 1280 1281 trace_usb_uhci_exit(); 1282 1283 if (s->frame_timer) { 1284 timer_del(s->frame_timer); 1285 timer_free(s->frame_timer); 1286 s->frame_timer = NULL; 1287 } 1288 1289 if (s->bh) { 1290 qemu_bh_delete(s->bh); 1291 } 1292 1293 uhci_async_cancel_all(s); 1294 1295 if (!s->masterbus) { 1296 usb_bus_release(&s->bus); 1297 } 1298 } 1299 1300 static Property uhci_properties_companion[] = { 1301 DEFINE_PROP_STRING("masterbus", UHCIState, masterbus), 1302 DEFINE_PROP_UINT32("firstport", UHCIState, firstport, 0), 1303 DEFINE_PROP_UINT32("bandwidth", UHCIState, frame_bandwidth, 1280), 1304 DEFINE_PROP_UINT32("maxframes", UHCIState, maxframes, 128), 1305 DEFINE_PROP_END_OF_LIST(), 1306 }; 1307 static Property uhci_properties_standalone[] = { 1308 DEFINE_PROP_UINT32("bandwidth", UHCIState, frame_bandwidth, 1280), 1309 DEFINE_PROP_UINT32("maxframes", UHCIState, maxframes, 128), 1310 DEFINE_PROP_END_OF_LIST(), 1311 }; 1312 1313 static void uhci_class_init(ObjectClass *klass, void *data) 1314 { 1315 DeviceClass *dc = DEVICE_CLASS(klass); 1316 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 1317 1318 k->class_id = PCI_CLASS_SERIAL_USB; 1319 dc->vmsd = &vmstate_uhci; 1320 dc->reset = uhci_reset; 1321 set_bit(DEVICE_CATEGORY_USB, dc->categories); 1322 } 1323 1324 static const TypeInfo uhci_pci_type_info = { 1325 .name = TYPE_UHCI, 1326 .parent = TYPE_PCI_DEVICE, 1327 .instance_size = sizeof(UHCIState), 1328 .class_size = sizeof(UHCIPCIDeviceClass), 1329 .abstract = true, 1330 .class_init = uhci_class_init, 1331 .interfaces = (InterfaceInfo[]) { 1332 { INTERFACE_CONVENTIONAL_PCI_DEVICE }, 1333 { }, 1334 }, 1335 }; 1336 1337 static void uhci_data_class_init(ObjectClass *klass, void *data) 1338 { 1339 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 1340 DeviceClass *dc = DEVICE_CLASS(klass); 1341 UHCIPCIDeviceClass *u = container_of(k, UHCIPCIDeviceClass, parent_class); 1342 UHCIInfo *info = data; 1343 1344 k->realize = info->realize ? info->realize : usb_uhci_common_realize; 1345 k->exit = info->unplug ? usb_uhci_exit : NULL; 1346 k->vendor_id = info->vendor_id; 1347 k->device_id = info->device_id; 1348 k->revision = info->revision; 1349 if (!info->unplug) { 1350 /* uhci controllers in companion setups can't be hotplugged */ 1351 dc->hotpluggable = false; 1352 dc->props = uhci_properties_companion; 1353 } else { 1354 dc->props = uhci_properties_standalone; 1355 } 1356 u->info = *info; 1357 } 1358 1359 static UHCIInfo uhci_info[] = { 1360 { 1361 .name = "piix3-usb-uhci", 1362 .vendor_id = PCI_VENDOR_ID_INTEL, 1363 .device_id = PCI_DEVICE_ID_INTEL_82371SB_2, 1364 .revision = 0x01, 1365 .irq_pin = 3, 1366 .unplug = true, 1367 },{ 1368 .name = "piix4-usb-uhci", 1369 .vendor_id = PCI_VENDOR_ID_INTEL, 1370 .device_id = PCI_DEVICE_ID_INTEL_82371AB_2, 1371 .revision = 0x01, 1372 .irq_pin = 3, 1373 .unplug = true, 1374 },{ 1375 .name = "vt82c686b-usb-uhci", 1376 .vendor_id = PCI_VENDOR_ID_VIA, 1377 .device_id = PCI_DEVICE_ID_VIA_UHCI, 1378 .revision = 0x01, 1379 .irq_pin = 3, 1380 .realize = usb_uhci_vt82c686b_realize, 1381 .unplug = true, 1382 },{ 1383 .name = "ich9-usb-uhci1", /* 00:1d.0 */ 1384 .vendor_id = PCI_VENDOR_ID_INTEL, 1385 .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI1, 1386 .revision = 0x03, 1387 .irq_pin = 0, 1388 .unplug = false, 1389 },{ 1390 .name = "ich9-usb-uhci2", /* 00:1d.1 */ 1391 .vendor_id = PCI_VENDOR_ID_INTEL, 1392 .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI2, 1393 .revision = 0x03, 1394 .irq_pin = 1, 1395 .unplug = false, 1396 },{ 1397 .name = "ich9-usb-uhci3", /* 00:1d.2 */ 1398 .vendor_id = PCI_VENDOR_ID_INTEL, 1399 .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI3, 1400 .revision = 0x03, 1401 .irq_pin = 2, 1402 .unplug = false, 1403 },{ 1404 .name = "ich9-usb-uhci4", /* 00:1a.0 */ 1405 .vendor_id = PCI_VENDOR_ID_INTEL, 1406 .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI4, 1407 .revision = 0x03, 1408 .irq_pin = 0, 1409 .unplug = false, 1410 },{ 1411 .name = "ich9-usb-uhci5", /* 00:1a.1 */ 1412 .vendor_id = PCI_VENDOR_ID_INTEL, 1413 .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI5, 1414 .revision = 0x03, 1415 .irq_pin = 1, 1416 .unplug = false, 1417 },{ 1418 .name = "ich9-usb-uhci6", /* 00:1a.2 */ 1419 .vendor_id = PCI_VENDOR_ID_INTEL, 1420 .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI6, 1421 .revision = 0x03, 1422 .irq_pin = 2, 1423 .unplug = false, 1424 } 1425 }; 1426 1427 static void uhci_register_types(void) 1428 { 1429 TypeInfo uhci_type_info = { 1430 .parent = TYPE_UHCI, 1431 .class_init = uhci_data_class_init, 1432 }; 1433 int i; 1434 1435 type_register_static(&uhci_pci_type_info); 1436 1437 for (i = 0; i < ARRAY_SIZE(uhci_info); i++) { 1438 uhci_type_info.name = uhci_info[i].name; 1439 uhci_type_info.class_data = uhci_info + i; 1440 type_register(&uhci_type_info); 1441 } 1442 } 1443 1444 type_init(uhci_register_types) 1445