1 /* 2 * USB UHCI controller emulation 3 * 4 * Copyright (c) 2005 Fabrice Bellard 5 * 6 * Copyright (c) 2008 Max Krasnyansky 7 * Magor rewrite of the UHCI data structures parser and frame processor 8 * Support for fully async operation and multiple outstanding transactions 9 * 10 * Permission is hereby granted, free of charge, to any person obtaining a copy 11 * of this software and associated documentation files (the "Software"), to deal 12 * in the Software without restriction, including without limitation the rights 13 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 14 * copies of the Software, and to permit persons to whom the Software is 15 * furnished to do so, subject to the following conditions: 16 * 17 * The above copyright notice and this permission notice shall be included in 18 * all copies or substantial portions of the Software. 19 * 20 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 21 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 22 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 23 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 24 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 25 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 26 * THE SOFTWARE. 27 */ 28 29 #include "qemu/osdep.h" 30 #include "hw/usb.h" 31 #include "hw/usb/uhci-regs.h" 32 #include "migration/vmstate.h" 33 #include "hw/pci/pci.h" 34 #include "hw/irq.h" 35 #include "hw/qdev-properties.h" 36 #include "qapi/error.h" 37 #include "qemu/timer.h" 38 #include "qemu/iov.h" 39 #include "sysemu/dma.h" 40 #include "trace.h" 41 #include "qemu/main-loop.h" 42 #include "qemu/module.h" 43 #include "qom/object.h" 44 #include "hcd-uhci.h" 45 46 #define FRAME_TIMER_FREQ 1000 47 48 #define FRAME_MAX_LOOPS 256 49 50 /* Must be large enough to handle 10 frame delay for initial isoc requests */ 51 #define QH_VALID 32 52 53 #define MAX_FRAMES_PER_TICK (QH_VALID / 2) 54 55 enum { 56 TD_RESULT_STOP_FRAME = 10, 57 TD_RESULT_COMPLETE, 58 TD_RESULT_NEXT_QH, 59 TD_RESULT_ASYNC_START, 60 TD_RESULT_ASYNC_CONT, 61 }; 62 63 typedef struct UHCIAsync UHCIAsync; 64 65 struct UHCIPCIDeviceClass { 66 PCIDeviceClass parent_class; 67 UHCIInfo info; 68 }; 69 70 /* 71 * Pending async transaction. 72 * 'packet' must be the first field because completion 73 * handler does "(UHCIAsync *) pkt" cast. 74 */ 75 76 struct UHCIAsync { 77 USBPacket packet; 78 uint8_t static_buf[64]; /* 64 bytes is enough, except for isoc packets */ 79 uint8_t *buf; 80 UHCIQueue *queue; 81 QTAILQ_ENTRY(UHCIAsync) next; 82 uint32_t td_addr; 83 uint8_t done; 84 }; 85 86 struct UHCIQueue { 87 uint32_t qh_addr; 88 uint32_t token; 89 UHCIState *uhci; 90 USBEndpoint *ep; 91 QTAILQ_ENTRY(UHCIQueue) next; 92 QTAILQ_HEAD(, UHCIAsync) asyncs; 93 int8_t valid; 94 }; 95 96 typedef struct UHCI_TD { 97 uint32_t link; 98 uint32_t ctrl; /* see TD_CTRL_xxx */ 99 uint32_t token; 100 uint32_t buffer; 101 } UHCI_TD; 102 103 typedef struct UHCI_QH { 104 uint32_t link; 105 uint32_t el_link; 106 } UHCI_QH; 107 108 static void uhci_async_cancel(UHCIAsync *async); 109 static void uhci_queue_fill(UHCIQueue *q, UHCI_TD *td); 110 static void uhci_resume(void *opaque); 111 112 static inline int32_t uhci_queue_token(UHCI_TD *td) 113 { 114 if ((td->token & (0xf << 15)) == 0) { 115 /* ctrl ep, cover ep and dev, not pid! */ 116 return td->token & 0x7ff00; 117 } else { 118 /* covers ep, dev, pid -> identifies the endpoint */ 119 return td->token & 0x7ffff; 120 } 121 } 122 123 static UHCIQueue *uhci_queue_new(UHCIState *s, uint32_t qh_addr, UHCI_TD *td, 124 USBEndpoint *ep) 125 { 126 UHCIQueue *queue; 127 128 queue = g_new0(UHCIQueue, 1); 129 queue->uhci = s; 130 queue->qh_addr = qh_addr; 131 queue->token = uhci_queue_token(td); 132 queue->ep = ep; 133 QTAILQ_INIT(&queue->asyncs); 134 QTAILQ_INSERT_HEAD(&s->queues, queue, next); 135 queue->valid = QH_VALID; 136 trace_usb_uhci_queue_add(queue->token); 137 return queue; 138 } 139 140 static void uhci_queue_free(UHCIQueue *queue, const char *reason) 141 { 142 UHCIState *s = queue->uhci; 143 UHCIAsync *async; 144 145 while (!QTAILQ_EMPTY(&queue->asyncs)) { 146 async = QTAILQ_FIRST(&queue->asyncs); 147 uhci_async_cancel(async); 148 } 149 usb_device_ep_stopped(queue->ep->dev, queue->ep); 150 151 trace_usb_uhci_queue_del(queue->token, reason); 152 QTAILQ_REMOVE(&s->queues, queue, next); 153 g_free(queue); 154 } 155 156 static UHCIQueue *uhci_queue_find(UHCIState *s, UHCI_TD *td) 157 { 158 uint32_t token = uhci_queue_token(td); 159 UHCIQueue *queue; 160 161 QTAILQ_FOREACH(queue, &s->queues, next) { 162 if (queue->token == token) { 163 return queue; 164 } 165 } 166 return NULL; 167 } 168 169 static bool uhci_queue_verify(UHCIQueue *queue, uint32_t qh_addr, UHCI_TD *td, 170 uint32_t td_addr, bool queuing) 171 { 172 UHCIAsync *first = QTAILQ_FIRST(&queue->asyncs); 173 uint32_t queue_token_addr = (queue->token >> 8) & 0x7f; 174 175 return queue->qh_addr == qh_addr && 176 queue->token == uhci_queue_token(td) && 177 queue_token_addr == queue->ep->dev->addr && 178 (queuing || !(td->ctrl & TD_CTRL_ACTIVE) || first == NULL || 179 first->td_addr == td_addr); 180 } 181 182 static UHCIAsync *uhci_async_alloc(UHCIQueue *queue, uint32_t td_addr) 183 { 184 UHCIAsync *async = g_new0(UHCIAsync, 1); 185 186 async->queue = queue; 187 async->td_addr = td_addr; 188 usb_packet_init(&async->packet); 189 trace_usb_uhci_packet_add(async->queue->token, async->td_addr); 190 191 return async; 192 } 193 194 static void uhci_async_free(UHCIAsync *async) 195 { 196 trace_usb_uhci_packet_del(async->queue->token, async->td_addr); 197 usb_packet_cleanup(&async->packet); 198 if (async->buf != async->static_buf) { 199 g_free(async->buf); 200 } 201 g_free(async); 202 } 203 204 static void uhci_async_link(UHCIAsync *async) 205 { 206 UHCIQueue *queue = async->queue; 207 QTAILQ_INSERT_TAIL(&queue->asyncs, async, next); 208 trace_usb_uhci_packet_link_async(async->queue->token, async->td_addr); 209 } 210 211 static void uhci_async_unlink(UHCIAsync *async) 212 { 213 UHCIQueue *queue = async->queue; 214 QTAILQ_REMOVE(&queue->asyncs, async, next); 215 trace_usb_uhci_packet_unlink_async(async->queue->token, async->td_addr); 216 } 217 218 static void uhci_async_cancel(UHCIAsync *async) 219 { 220 uhci_async_unlink(async); 221 trace_usb_uhci_packet_cancel(async->queue->token, async->td_addr, 222 async->done); 223 if (!async->done) 224 usb_cancel_packet(&async->packet); 225 uhci_async_free(async); 226 } 227 228 /* 229 * Mark all outstanding async packets as invalid. 230 * This is used for canceling them when TDs are removed by the HCD. 231 */ 232 static void uhci_async_validate_begin(UHCIState *s) 233 { 234 UHCIQueue *queue; 235 236 QTAILQ_FOREACH(queue, &s->queues, next) { 237 queue->valid--; 238 } 239 } 240 241 /* 242 * Cancel async packets that are no longer valid 243 */ 244 static void uhci_async_validate_end(UHCIState *s) 245 { 246 UHCIQueue *queue, *n; 247 248 QTAILQ_FOREACH_SAFE(queue, &s->queues, next, n) { 249 if (!queue->valid) { 250 uhci_queue_free(queue, "validate-end"); 251 } 252 } 253 } 254 255 static void uhci_async_cancel_device(UHCIState *s, USBDevice *dev) 256 { 257 UHCIQueue *queue, *n; 258 259 QTAILQ_FOREACH_SAFE(queue, &s->queues, next, n) { 260 if (queue->ep->dev == dev) { 261 uhci_queue_free(queue, "cancel-device"); 262 } 263 } 264 } 265 266 static void uhci_async_cancel_all(UHCIState *s) 267 { 268 UHCIQueue *queue, *nq; 269 270 QTAILQ_FOREACH_SAFE(queue, &s->queues, next, nq) { 271 uhci_queue_free(queue, "cancel-all"); 272 } 273 } 274 275 static UHCIAsync *uhci_async_find_td(UHCIState *s, uint32_t td_addr) 276 { 277 UHCIQueue *queue; 278 UHCIAsync *async; 279 280 QTAILQ_FOREACH(queue, &s->queues, next) { 281 QTAILQ_FOREACH(async, &queue->asyncs, next) { 282 if (async->td_addr == td_addr) { 283 return async; 284 } 285 } 286 } 287 return NULL; 288 } 289 290 static void uhci_update_irq(UHCIState *s) 291 { 292 int level = 0; 293 if (((s->status2 & 1) && (s->intr & (1 << 2))) || 294 ((s->status2 & 2) && (s->intr & (1 << 3))) || 295 ((s->status & UHCI_STS_USBERR) && (s->intr & (1 << 0))) || 296 ((s->status & UHCI_STS_RD) && (s->intr & (1 << 1))) || 297 (s->status & UHCI_STS_HSERR) || 298 (s->status & UHCI_STS_HCPERR)) { 299 level = 1; 300 } 301 qemu_set_irq(s->irq, level); 302 } 303 304 static void uhci_reset(DeviceState *dev) 305 { 306 PCIDevice *d = PCI_DEVICE(dev); 307 UHCIState *s = UHCI(d); 308 uint8_t *pci_conf; 309 int i; 310 UHCIPort *port; 311 312 trace_usb_uhci_reset(); 313 314 pci_conf = s->dev.config; 315 316 pci_conf[0x6a] = 0x01; /* usb clock */ 317 pci_conf[0x6b] = 0x00; 318 s->cmd = 0; 319 s->status = UHCI_STS_HCHALTED; 320 s->status2 = 0; 321 s->intr = 0; 322 s->fl_base_addr = 0; 323 s->sof_timing = 64; 324 325 for(i = 0; i < NB_PORTS; i++) { 326 port = &s->ports[i]; 327 port->ctrl = 0x0080; 328 if (port->port.dev && port->port.dev->attached) { 329 usb_port_reset(&port->port); 330 } 331 } 332 333 uhci_async_cancel_all(s); 334 qemu_bh_cancel(s->bh); 335 uhci_update_irq(s); 336 } 337 338 static const VMStateDescription vmstate_uhci_port = { 339 .name = "uhci port", 340 .version_id = 1, 341 .minimum_version_id = 1, 342 .fields = (VMStateField[]) { 343 VMSTATE_UINT16(ctrl, UHCIPort), 344 VMSTATE_END_OF_LIST() 345 } 346 }; 347 348 static int uhci_post_load(void *opaque, int version_id) 349 { 350 UHCIState *s = opaque; 351 352 if (version_id < 2) { 353 s->expire_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 354 (NANOSECONDS_PER_SECOND / FRAME_TIMER_FREQ); 355 } 356 return 0; 357 } 358 359 static const VMStateDescription vmstate_uhci = { 360 .name = "uhci", 361 .version_id = 3, 362 .minimum_version_id = 1, 363 .post_load = uhci_post_load, 364 .fields = (VMStateField[]) { 365 VMSTATE_PCI_DEVICE(dev, UHCIState), 366 VMSTATE_UINT8_EQUAL(num_ports_vmstate, UHCIState, NULL), 367 VMSTATE_STRUCT_ARRAY(ports, UHCIState, NB_PORTS, 1, 368 vmstate_uhci_port, UHCIPort), 369 VMSTATE_UINT16(cmd, UHCIState), 370 VMSTATE_UINT16(status, UHCIState), 371 VMSTATE_UINT16(intr, UHCIState), 372 VMSTATE_UINT16(frnum, UHCIState), 373 VMSTATE_UINT32(fl_base_addr, UHCIState), 374 VMSTATE_UINT8(sof_timing, UHCIState), 375 VMSTATE_UINT8(status2, UHCIState), 376 VMSTATE_TIMER_PTR(frame_timer, UHCIState), 377 VMSTATE_INT64_V(expire_time, UHCIState, 2), 378 VMSTATE_UINT32_V(pending_int_mask, UHCIState, 3), 379 VMSTATE_END_OF_LIST() 380 } 381 }; 382 383 static void uhci_port_write(void *opaque, hwaddr addr, 384 uint64_t val, unsigned size) 385 { 386 UHCIState *s = opaque; 387 388 trace_usb_uhci_mmio_writew(addr, val); 389 390 switch(addr) { 391 case 0x00: 392 if ((val & UHCI_CMD_RS) && !(s->cmd & UHCI_CMD_RS)) { 393 /* start frame processing */ 394 trace_usb_uhci_schedule_start(); 395 s->expire_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 396 (NANOSECONDS_PER_SECOND / FRAME_TIMER_FREQ); 397 timer_mod(s->frame_timer, s->expire_time); 398 s->status &= ~UHCI_STS_HCHALTED; 399 } else if (!(val & UHCI_CMD_RS)) { 400 s->status |= UHCI_STS_HCHALTED; 401 } 402 if (val & UHCI_CMD_GRESET) { 403 UHCIPort *port; 404 int i; 405 406 /* send reset on the USB bus */ 407 for(i = 0; i < NB_PORTS; i++) { 408 port = &s->ports[i]; 409 usb_device_reset(port->port.dev); 410 } 411 uhci_reset(DEVICE(s)); 412 return; 413 } 414 if (val & UHCI_CMD_HCRESET) { 415 uhci_reset(DEVICE(s)); 416 return; 417 } 418 s->cmd = val; 419 if (val & UHCI_CMD_EGSM) { 420 if ((s->ports[0].ctrl & UHCI_PORT_RD) || 421 (s->ports[1].ctrl & UHCI_PORT_RD)) { 422 uhci_resume(s); 423 } 424 } 425 break; 426 case 0x02: 427 s->status &= ~val; 428 /* XXX: the chip spec is not coherent, so we add a hidden 429 register to distinguish between IOC and SPD */ 430 if (val & UHCI_STS_USBINT) 431 s->status2 = 0; 432 uhci_update_irq(s); 433 break; 434 case 0x04: 435 s->intr = val; 436 uhci_update_irq(s); 437 break; 438 case 0x06: 439 if (s->status & UHCI_STS_HCHALTED) 440 s->frnum = val & 0x7ff; 441 break; 442 case 0x08: 443 s->fl_base_addr &= 0xffff0000; 444 s->fl_base_addr |= val & ~0xfff; 445 break; 446 case 0x0a: 447 s->fl_base_addr &= 0x0000ffff; 448 s->fl_base_addr |= (val << 16); 449 break; 450 case 0x0c: 451 s->sof_timing = val & 0xff; 452 break; 453 case 0x10 ... 0x1f: 454 { 455 UHCIPort *port; 456 USBDevice *dev; 457 int n; 458 459 n = (addr >> 1) & 7; 460 if (n >= NB_PORTS) 461 return; 462 port = &s->ports[n]; 463 dev = port->port.dev; 464 if (dev && dev->attached) { 465 /* port reset */ 466 if ( (val & UHCI_PORT_RESET) && 467 !(port->ctrl & UHCI_PORT_RESET) ) { 468 usb_device_reset(dev); 469 } 470 } 471 port->ctrl &= UHCI_PORT_READ_ONLY; 472 /* enabled may only be set if a device is connected */ 473 if (!(port->ctrl & UHCI_PORT_CCS)) { 474 val &= ~UHCI_PORT_EN; 475 } 476 port->ctrl |= (val & ~UHCI_PORT_READ_ONLY); 477 /* some bits are reset when a '1' is written to them */ 478 port->ctrl &= ~(val & UHCI_PORT_WRITE_CLEAR); 479 } 480 break; 481 } 482 } 483 484 static uint64_t uhci_port_read(void *opaque, hwaddr addr, unsigned size) 485 { 486 UHCIState *s = opaque; 487 uint32_t val; 488 489 switch(addr) { 490 case 0x00: 491 val = s->cmd; 492 break; 493 case 0x02: 494 val = s->status; 495 break; 496 case 0x04: 497 val = s->intr; 498 break; 499 case 0x06: 500 val = s->frnum; 501 break; 502 case 0x08: 503 val = s->fl_base_addr & 0xffff; 504 break; 505 case 0x0a: 506 val = (s->fl_base_addr >> 16) & 0xffff; 507 break; 508 case 0x0c: 509 val = s->sof_timing; 510 break; 511 case 0x10 ... 0x1f: 512 { 513 UHCIPort *port; 514 int n; 515 n = (addr >> 1) & 7; 516 if (n >= NB_PORTS) 517 goto read_default; 518 port = &s->ports[n]; 519 val = port->ctrl; 520 } 521 break; 522 default: 523 read_default: 524 val = 0xff7f; /* disabled port */ 525 break; 526 } 527 528 trace_usb_uhci_mmio_readw(addr, val); 529 530 return val; 531 } 532 533 /* signal resume if controller suspended */ 534 static void uhci_resume (void *opaque) 535 { 536 UHCIState *s = (UHCIState *)opaque; 537 538 if (!s) 539 return; 540 541 if (s->cmd & UHCI_CMD_EGSM) { 542 s->cmd |= UHCI_CMD_FGR; 543 s->status |= UHCI_STS_RD; 544 uhci_update_irq(s); 545 } 546 } 547 548 static void uhci_attach(USBPort *port1) 549 { 550 UHCIState *s = port1->opaque; 551 UHCIPort *port = &s->ports[port1->index]; 552 553 /* set connect status */ 554 port->ctrl |= UHCI_PORT_CCS | UHCI_PORT_CSC; 555 556 /* update speed */ 557 if (port->port.dev->speed == USB_SPEED_LOW) { 558 port->ctrl |= UHCI_PORT_LSDA; 559 } else { 560 port->ctrl &= ~UHCI_PORT_LSDA; 561 } 562 563 uhci_resume(s); 564 } 565 566 static void uhci_detach(USBPort *port1) 567 { 568 UHCIState *s = port1->opaque; 569 UHCIPort *port = &s->ports[port1->index]; 570 571 uhci_async_cancel_device(s, port1->dev); 572 573 /* set connect status */ 574 if (port->ctrl & UHCI_PORT_CCS) { 575 port->ctrl &= ~UHCI_PORT_CCS; 576 port->ctrl |= UHCI_PORT_CSC; 577 } 578 /* disable port */ 579 if (port->ctrl & UHCI_PORT_EN) { 580 port->ctrl &= ~UHCI_PORT_EN; 581 port->ctrl |= UHCI_PORT_ENC; 582 } 583 584 uhci_resume(s); 585 } 586 587 static void uhci_child_detach(USBPort *port1, USBDevice *child) 588 { 589 UHCIState *s = port1->opaque; 590 591 uhci_async_cancel_device(s, child); 592 } 593 594 static void uhci_wakeup(USBPort *port1) 595 { 596 UHCIState *s = port1->opaque; 597 UHCIPort *port = &s->ports[port1->index]; 598 599 if (port->ctrl & UHCI_PORT_SUSPEND && !(port->ctrl & UHCI_PORT_RD)) { 600 port->ctrl |= UHCI_PORT_RD; 601 uhci_resume(s); 602 } 603 } 604 605 static USBDevice *uhci_find_device(UHCIState *s, uint8_t addr) 606 { 607 USBDevice *dev; 608 int i; 609 610 for (i = 0; i < NB_PORTS; i++) { 611 UHCIPort *port = &s->ports[i]; 612 if (!(port->ctrl & UHCI_PORT_EN)) { 613 continue; 614 } 615 dev = usb_find_device(&port->port, addr); 616 if (dev != NULL) { 617 return dev; 618 } 619 } 620 return NULL; 621 } 622 623 static void uhci_read_td(UHCIState *s, UHCI_TD *td, uint32_t link) 624 { 625 pci_dma_read(&s->dev, link & ~0xf, td, sizeof(*td)); 626 le32_to_cpus(&td->link); 627 le32_to_cpus(&td->ctrl); 628 le32_to_cpus(&td->token); 629 le32_to_cpus(&td->buffer); 630 } 631 632 static int uhci_handle_td_error(UHCIState *s, UHCI_TD *td, uint32_t td_addr, 633 int status, uint32_t *int_mask) 634 { 635 uint32_t queue_token = uhci_queue_token(td); 636 int ret; 637 638 switch (status) { 639 case USB_RET_NAK: 640 td->ctrl |= TD_CTRL_NAK; 641 return TD_RESULT_NEXT_QH; 642 643 case USB_RET_STALL: 644 td->ctrl |= TD_CTRL_STALL; 645 trace_usb_uhci_packet_complete_stall(queue_token, td_addr); 646 ret = TD_RESULT_NEXT_QH; 647 break; 648 649 case USB_RET_BABBLE: 650 td->ctrl |= TD_CTRL_BABBLE | TD_CTRL_STALL; 651 /* frame interrupted */ 652 trace_usb_uhci_packet_complete_babble(queue_token, td_addr); 653 ret = TD_RESULT_STOP_FRAME; 654 break; 655 656 case USB_RET_IOERROR: 657 case USB_RET_NODEV: 658 default: 659 td->ctrl |= TD_CTRL_TIMEOUT; 660 td->ctrl &= ~(3 << TD_CTRL_ERROR_SHIFT); 661 trace_usb_uhci_packet_complete_error(queue_token, td_addr); 662 ret = TD_RESULT_NEXT_QH; 663 break; 664 } 665 666 td->ctrl &= ~TD_CTRL_ACTIVE; 667 s->status |= UHCI_STS_USBERR; 668 if (td->ctrl & TD_CTRL_IOC) { 669 *int_mask |= 0x01; 670 } 671 uhci_update_irq(s); 672 return ret; 673 } 674 675 static int uhci_complete_td(UHCIState *s, UHCI_TD *td, UHCIAsync *async, uint32_t *int_mask) 676 { 677 int len = 0, max_len; 678 uint8_t pid; 679 680 max_len = ((td->token >> 21) + 1) & 0x7ff; 681 pid = td->token & 0xff; 682 683 if (td->ctrl & TD_CTRL_IOS) 684 td->ctrl &= ~TD_CTRL_ACTIVE; 685 686 if (async->packet.status != USB_RET_SUCCESS) { 687 return uhci_handle_td_error(s, td, async->td_addr, 688 async->packet.status, int_mask); 689 } 690 691 len = async->packet.actual_length; 692 td->ctrl = (td->ctrl & ~0x7ff) | ((len - 1) & 0x7ff); 693 694 /* The NAK bit may have been set by a previous frame, so clear it 695 here. The docs are somewhat unclear, but win2k relies on this 696 behavior. */ 697 td->ctrl &= ~(TD_CTRL_ACTIVE | TD_CTRL_NAK); 698 if (td->ctrl & TD_CTRL_IOC) 699 *int_mask |= 0x01; 700 701 if (pid == USB_TOKEN_IN) { 702 pci_dma_write(&s->dev, td->buffer, async->buf, len); 703 if ((td->ctrl & TD_CTRL_SPD) && len < max_len) { 704 *int_mask |= 0x02; 705 /* short packet: do not update QH */ 706 trace_usb_uhci_packet_complete_shortxfer(async->queue->token, 707 async->td_addr); 708 return TD_RESULT_NEXT_QH; 709 } 710 } 711 712 /* success */ 713 trace_usb_uhci_packet_complete_success(async->queue->token, 714 async->td_addr); 715 return TD_RESULT_COMPLETE; 716 } 717 718 static int uhci_handle_td(UHCIState *s, UHCIQueue *q, uint32_t qh_addr, 719 UHCI_TD *td, uint32_t td_addr, uint32_t *int_mask) 720 { 721 int ret, max_len; 722 bool spd; 723 bool queuing = (q != NULL); 724 uint8_t pid = td->token & 0xff; 725 UHCIAsync *async; 726 727 async = uhci_async_find_td(s, td_addr); 728 if (async) { 729 if (uhci_queue_verify(async->queue, qh_addr, td, td_addr, queuing)) { 730 assert(q == NULL || q == async->queue); 731 q = async->queue; 732 } else { 733 uhci_queue_free(async->queue, "guest re-used pending td"); 734 async = NULL; 735 } 736 } 737 738 if (q == NULL) { 739 q = uhci_queue_find(s, td); 740 if (q && !uhci_queue_verify(q, qh_addr, td, td_addr, queuing)) { 741 uhci_queue_free(q, "guest re-used qh"); 742 q = NULL; 743 } 744 } 745 746 if (q) { 747 q->valid = QH_VALID; 748 } 749 750 /* Is active ? */ 751 if (!(td->ctrl & TD_CTRL_ACTIVE)) { 752 if (async) { 753 /* Guest marked a pending td non-active, cancel the queue */ 754 uhci_queue_free(async->queue, "pending td non-active"); 755 } 756 /* 757 * ehci11d spec page 22: "Even if the Active bit in the TD is already 758 * cleared when the TD is fetched ... an IOC interrupt is generated" 759 */ 760 if (td->ctrl & TD_CTRL_IOC) { 761 *int_mask |= 0x01; 762 } 763 return TD_RESULT_NEXT_QH; 764 } 765 766 switch (pid) { 767 case USB_TOKEN_OUT: 768 case USB_TOKEN_SETUP: 769 case USB_TOKEN_IN: 770 break; 771 default: 772 /* invalid pid : frame interrupted */ 773 s->status |= UHCI_STS_HCPERR; 774 s->cmd &= ~UHCI_CMD_RS; 775 uhci_update_irq(s); 776 return TD_RESULT_STOP_FRAME; 777 } 778 779 if (async) { 780 if (queuing) { 781 /* we are busy filling the queue, we are not prepared 782 to consume completed packages then, just leave them 783 in async state */ 784 return TD_RESULT_ASYNC_CONT; 785 } 786 if (!async->done) { 787 UHCI_TD last_td; 788 UHCIAsync *last = QTAILQ_LAST(&async->queue->asyncs); 789 /* 790 * While we are waiting for the current td to complete, the guest 791 * may have added more tds to the queue. Note we re-read the td 792 * rather then caching it, as we want to see guest made changes! 793 */ 794 uhci_read_td(s, &last_td, last->td_addr); 795 uhci_queue_fill(async->queue, &last_td); 796 797 return TD_RESULT_ASYNC_CONT; 798 } 799 uhci_async_unlink(async); 800 goto done; 801 } 802 803 if (s->completions_only) { 804 return TD_RESULT_ASYNC_CONT; 805 } 806 807 /* Allocate new packet */ 808 if (q == NULL) { 809 USBDevice *dev; 810 USBEndpoint *ep; 811 812 dev = uhci_find_device(s, (td->token >> 8) & 0x7f); 813 if (dev == NULL) { 814 return uhci_handle_td_error(s, td, td_addr, USB_RET_NODEV, 815 int_mask); 816 } 817 ep = usb_ep_get(dev, pid, (td->token >> 15) & 0xf); 818 q = uhci_queue_new(s, qh_addr, td, ep); 819 } 820 async = uhci_async_alloc(q, td_addr); 821 822 max_len = ((td->token >> 21) + 1) & 0x7ff; 823 spd = (pid == USB_TOKEN_IN && (td->ctrl & TD_CTRL_SPD) != 0); 824 usb_packet_setup(&async->packet, pid, q->ep, 0, td_addr, spd, 825 (td->ctrl & TD_CTRL_IOC) != 0); 826 if (max_len <= sizeof(async->static_buf)) { 827 async->buf = async->static_buf; 828 } else { 829 async->buf = g_malloc(max_len); 830 } 831 usb_packet_addbuf(&async->packet, async->buf, max_len); 832 833 switch(pid) { 834 case USB_TOKEN_OUT: 835 case USB_TOKEN_SETUP: 836 pci_dma_read(&s->dev, td->buffer, async->buf, max_len); 837 usb_handle_packet(q->ep->dev, &async->packet); 838 if (async->packet.status == USB_RET_SUCCESS) { 839 async->packet.actual_length = max_len; 840 } 841 break; 842 843 case USB_TOKEN_IN: 844 usb_handle_packet(q->ep->dev, &async->packet); 845 break; 846 847 default: 848 abort(); /* Never to execute */ 849 } 850 851 if (async->packet.status == USB_RET_ASYNC) { 852 uhci_async_link(async); 853 if (!queuing) { 854 uhci_queue_fill(q, td); 855 } 856 return TD_RESULT_ASYNC_START; 857 } 858 859 done: 860 ret = uhci_complete_td(s, td, async, int_mask); 861 uhci_async_free(async); 862 return ret; 863 } 864 865 static void uhci_async_complete(USBPort *port, USBPacket *packet) 866 { 867 UHCIAsync *async = container_of(packet, UHCIAsync, packet); 868 UHCIState *s = async->queue->uhci; 869 870 if (packet->status == USB_RET_REMOVE_FROM_QUEUE) { 871 uhci_async_cancel(async); 872 return; 873 } 874 875 async->done = 1; 876 /* Force processing of this packet *now*, needed for migration */ 877 s->completions_only = true; 878 qemu_bh_schedule(s->bh); 879 } 880 881 static int is_valid(uint32_t link) 882 { 883 return (link & 1) == 0; 884 } 885 886 static int is_qh(uint32_t link) 887 { 888 return (link & 2) != 0; 889 } 890 891 static int depth_first(uint32_t link) 892 { 893 return (link & 4) != 0; 894 } 895 896 /* QH DB used for detecting QH loops */ 897 #define UHCI_MAX_QUEUES 128 898 typedef struct { 899 uint32_t addr[UHCI_MAX_QUEUES]; 900 int count; 901 } QhDb; 902 903 static void qhdb_reset(QhDb *db) 904 { 905 db->count = 0; 906 } 907 908 /* Add QH to DB. Returns 1 if already present or DB is full. */ 909 static int qhdb_insert(QhDb *db, uint32_t addr) 910 { 911 int i; 912 for (i = 0; i < db->count; i++) 913 if (db->addr[i] == addr) 914 return 1; 915 916 if (db->count >= UHCI_MAX_QUEUES) 917 return 1; 918 919 db->addr[db->count++] = addr; 920 return 0; 921 } 922 923 static void uhci_queue_fill(UHCIQueue *q, UHCI_TD *td) 924 { 925 uint32_t int_mask = 0; 926 uint32_t plink = td->link; 927 UHCI_TD ptd; 928 int ret; 929 930 while (is_valid(plink)) { 931 uhci_read_td(q->uhci, &ptd, plink); 932 if (!(ptd.ctrl & TD_CTRL_ACTIVE)) { 933 break; 934 } 935 if (uhci_queue_token(&ptd) != q->token) { 936 break; 937 } 938 trace_usb_uhci_td_queue(plink & ~0xf, ptd.ctrl, ptd.token); 939 ret = uhci_handle_td(q->uhci, q, q->qh_addr, &ptd, plink, &int_mask); 940 if (ret == TD_RESULT_ASYNC_CONT) { 941 break; 942 } 943 assert(ret == TD_RESULT_ASYNC_START); 944 assert(int_mask == 0); 945 plink = ptd.link; 946 } 947 usb_device_flush_ep_queue(q->ep->dev, q->ep); 948 } 949 950 static void uhci_process_frame(UHCIState *s) 951 { 952 uint32_t frame_addr, link, old_td_ctrl, val, int_mask; 953 uint32_t curr_qh, td_count = 0; 954 int cnt, ret; 955 UHCI_TD td; 956 UHCI_QH qh; 957 QhDb qhdb; 958 959 frame_addr = s->fl_base_addr + ((s->frnum & 0x3ff) << 2); 960 961 pci_dma_read(&s->dev, frame_addr, &link, 4); 962 le32_to_cpus(&link); 963 964 int_mask = 0; 965 curr_qh = 0; 966 967 qhdb_reset(&qhdb); 968 969 for (cnt = FRAME_MAX_LOOPS; is_valid(link) && cnt; cnt--) { 970 if (!s->completions_only && s->frame_bytes >= s->frame_bandwidth) { 971 /* We've reached the usb 1.1 bandwidth, which is 972 1280 bytes/frame, stop processing */ 973 trace_usb_uhci_frame_stop_bandwidth(); 974 break; 975 } 976 if (is_qh(link)) { 977 /* QH */ 978 trace_usb_uhci_qh_load(link & ~0xf); 979 980 if (qhdb_insert(&qhdb, link)) { 981 /* 982 * We're going in circles. Which is not a bug because 983 * HCD is allowed to do that as part of the BW management. 984 * 985 * Stop processing here if no transaction has been done 986 * since we've been here last time. 987 */ 988 if (td_count == 0) { 989 trace_usb_uhci_frame_loop_stop_idle(); 990 break; 991 } else { 992 trace_usb_uhci_frame_loop_continue(); 993 td_count = 0; 994 qhdb_reset(&qhdb); 995 qhdb_insert(&qhdb, link); 996 } 997 } 998 999 pci_dma_read(&s->dev, link & ~0xf, &qh, sizeof(qh)); 1000 le32_to_cpus(&qh.link); 1001 le32_to_cpus(&qh.el_link); 1002 1003 if (!is_valid(qh.el_link)) { 1004 /* QH w/o elements */ 1005 curr_qh = 0; 1006 link = qh.link; 1007 } else { 1008 /* QH with elements */ 1009 curr_qh = link; 1010 link = qh.el_link; 1011 } 1012 continue; 1013 } 1014 1015 /* TD */ 1016 uhci_read_td(s, &td, link); 1017 trace_usb_uhci_td_load(curr_qh & ~0xf, link & ~0xf, td.ctrl, td.token); 1018 1019 old_td_ctrl = td.ctrl; 1020 ret = uhci_handle_td(s, NULL, curr_qh, &td, link, &int_mask); 1021 if (old_td_ctrl != td.ctrl) { 1022 /* update the status bits of the TD */ 1023 val = cpu_to_le32(td.ctrl); 1024 pci_dma_write(&s->dev, (link & ~0xf) + 4, &val, sizeof(val)); 1025 } 1026 1027 switch (ret) { 1028 case TD_RESULT_STOP_FRAME: /* interrupted frame */ 1029 goto out; 1030 1031 case TD_RESULT_NEXT_QH: 1032 case TD_RESULT_ASYNC_CONT: 1033 trace_usb_uhci_td_nextqh(curr_qh & ~0xf, link & ~0xf); 1034 link = curr_qh ? qh.link : td.link; 1035 continue; 1036 1037 case TD_RESULT_ASYNC_START: 1038 trace_usb_uhci_td_async(curr_qh & ~0xf, link & ~0xf); 1039 link = curr_qh ? qh.link : td.link; 1040 continue; 1041 1042 case TD_RESULT_COMPLETE: 1043 trace_usb_uhci_td_complete(curr_qh & ~0xf, link & ~0xf); 1044 link = td.link; 1045 td_count++; 1046 s->frame_bytes += (td.ctrl & 0x7ff) + 1; 1047 1048 if (curr_qh) { 1049 /* update QH element link */ 1050 qh.el_link = link; 1051 val = cpu_to_le32(qh.el_link); 1052 pci_dma_write(&s->dev, (curr_qh & ~0xf) + 4, &val, sizeof(val)); 1053 1054 if (!depth_first(link)) { 1055 /* done with this QH */ 1056 curr_qh = 0; 1057 link = qh.link; 1058 } 1059 } 1060 break; 1061 1062 default: 1063 assert(!"unknown return code"); 1064 } 1065 1066 /* go to the next entry */ 1067 } 1068 1069 out: 1070 s->pending_int_mask |= int_mask; 1071 } 1072 1073 static void uhci_bh(void *opaque) 1074 { 1075 UHCIState *s = opaque; 1076 uhci_process_frame(s); 1077 } 1078 1079 static void uhci_frame_timer(void *opaque) 1080 { 1081 UHCIState *s = opaque; 1082 uint64_t t_now, t_last_run; 1083 int i, frames; 1084 const uint64_t frame_t = NANOSECONDS_PER_SECOND / FRAME_TIMER_FREQ; 1085 1086 s->completions_only = false; 1087 qemu_bh_cancel(s->bh); 1088 1089 if (!(s->cmd & UHCI_CMD_RS)) { 1090 /* Full stop */ 1091 trace_usb_uhci_schedule_stop(); 1092 timer_del(s->frame_timer); 1093 uhci_async_cancel_all(s); 1094 /* set hchalted bit in status - UHCI11D 2.1.2 */ 1095 s->status |= UHCI_STS_HCHALTED; 1096 return; 1097 } 1098 1099 /* We still store expire_time in our state, for migration */ 1100 t_last_run = s->expire_time - frame_t; 1101 t_now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); 1102 1103 /* Process up to MAX_FRAMES_PER_TICK frames */ 1104 frames = (t_now - t_last_run) / frame_t; 1105 if (frames > s->maxframes) { 1106 int skipped = frames - s->maxframes; 1107 s->expire_time += skipped * frame_t; 1108 s->frnum = (s->frnum + skipped) & 0x7ff; 1109 frames -= skipped; 1110 } 1111 if (frames > MAX_FRAMES_PER_TICK) { 1112 frames = MAX_FRAMES_PER_TICK; 1113 } 1114 1115 for (i = 0; i < frames; i++) { 1116 s->frame_bytes = 0; 1117 trace_usb_uhci_frame_start(s->frnum); 1118 uhci_async_validate_begin(s); 1119 uhci_process_frame(s); 1120 uhci_async_validate_end(s); 1121 /* The spec says frnum is the frame currently being processed, and 1122 * the guest must look at frnum - 1 on interrupt, so inc frnum now */ 1123 s->frnum = (s->frnum + 1) & 0x7ff; 1124 s->expire_time += frame_t; 1125 } 1126 1127 /* Complete the previous frame(s) */ 1128 if (s->pending_int_mask) { 1129 s->status2 |= s->pending_int_mask; 1130 s->status |= UHCI_STS_USBINT; 1131 uhci_update_irq(s); 1132 } 1133 s->pending_int_mask = 0; 1134 1135 timer_mod(s->frame_timer, t_now + frame_t); 1136 } 1137 1138 static const MemoryRegionOps uhci_ioport_ops = { 1139 .read = uhci_port_read, 1140 .write = uhci_port_write, 1141 .valid.min_access_size = 1, 1142 .valid.max_access_size = 4, 1143 .impl.min_access_size = 2, 1144 .impl.max_access_size = 2, 1145 .endianness = DEVICE_LITTLE_ENDIAN, 1146 }; 1147 1148 static USBPortOps uhci_port_ops = { 1149 .attach = uhci_attach, 1150 .detach = uhci_detach, 1151 .child_detach = uhci_child_detach, 1152 .wakeup = uhci_wakeup, 1153 .complete = uhci_async_complete, 1154 }; 1155 1156 static USBBusOps uhci_bus_ops = { 1157 }; 1158 1159 void usb_uhci_common_realize(PCIDevice *dev, Error **errp) 1160 { 1161 Error *err = NULL; 1162 UHCIPCIDeviceClass *u = UHCI_GET_CLASS(dev); 1163 UHCIState *s = UHCI(dev); 1164 uint8_t *pci_conf = s->dev.config; 1165 int i; 1166 1167 pci_conf[PCI_CLASS_PROG] = 0x00; 1168 /* TODO: reset value should be 0. */ 1169 pci_conf[USB_SBRN] = USB_RELEASE_1; /* release number */ 1170 pci_config_set_interrupt_pin(pci_conf, u->info.irq_pin + 1); 1171 s->irq = pci_allocate_irq(dev); 1172 1173 if (s->masterbus) { 1174 USBPort *ports[NB_PORTS]; 1175 for(i = 0; i < NB_PORTS; i++) { 1176 ports[i] = &s->ports[i].port; 1177 } 1178 usb_register_companion(s->masterbus, ports, NB_PORTS, 1179 s->firstport, s, &uhci_port_ops, 1180 USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL, 1181 &err); 1182 if (err) { 1183 error_propagate(errp, err); 1184 return; 1185 } 1186 } else { 1187 usb_bus_new(&s->bus, sizeof(s->bus), &uhci_bus_ops, DEVICE(dev)); 1188 for (i = 0; i < NB_PORTS; i++) { 1189 usb_register_port(&s->bus, &s->ports[i].port, s, i, &uhci_port_ops, 1190 USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL); 1191 } 1192 } 1193 s->bh = qemu_bh_new_guarded(uhci_bh, s, &DEVICE(dev)->mem_reentrancy_guard); 1194 s->frame_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, uhci_frame_timer, s); 1195 s->num_ports_vmstate = NB_PORTS; 1196 QTAILQ_INIT(&s->queues); 1197 1198 memory_region_init_io(&s->io_bar, OBJECT(s), &uhci_ioport_ops, s, 1199 "uhci", 0x20); 1200 1201 /* Use region 4 for consistency with real hardware. BSD guests seem 1202 to rely on this. */ 1203 pci_register_bar(&s->dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &s->io_bar); 1204 } 1205 1206 static void usb_uhci_exit(PCIDevice *dev) 1207 { 1208 UHCIState *s = UHCI(dev); 1209 1210 trace_usb_uhci_exit(); 1211 1212 if (s->frame_timer) { 1213 timer_free(s->frame_timer); 1214 s->frame_timer = NULL; 1215 } 1216 1217 if (s->bh) { 1218 qemu_bh_delete(s->bh); 1219 } 1220 1221 uhci_async_cancel_all(s); 1222 1223 if (!s->masterbus) { 1224 usb_bus_release(&s->bus); 1225 } 1226 } 1227 1228 static Property uhci_properties_companion[] = { 1229 DEFINE_PROP_STRING("masterbus", UHCIState, masterbus), 1230 DEFINE_PROP_UINT32("firstport", UHCIState, firstport, 0), 1231 DEFINE_PROP_UINT32("bandwidth", UHCIState, frame_bandwidth, 1280), 1232 DEFINE_PROP_UINT32("maxframes", UHCIState, maxframes, 128), 1233 DEFINE_PROP_END_OF_LIST(), 1234 }; 1235 static Property uhci_properties_standalone[] = { 1236 DEFINE_PROP_UINT32("bandwidth", UHCIState, frame_bandwidth, 1280), 1237 DEFINE_PROP_UINT32("maxframes", UHCIState, maxframes, 128), 1238 DEFINE_PROP_END_OF_LIST(), 1239 }; 1240 1241 static void uhci_class_init(ObjectClass *klass, void *data) 1242 { 1243 DeviceClass *dc = DEVICE_CLASS(klass); 1244 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 1245 1246 k->class_id = PCI_CLASS_SERIAL_USB; 1247 dc->vmsd = &vmstate_uhci; 1248 dc->reset = uhci_reset; 1249 set_bit(DEVICE_CATEGORY_USB, dc->categories); 1250 } 1251 1252 static const TypeInfo uhci_pci_type_info = { 1253 .name = TYPE_UHCI, 1254 .parent = TYPE_PCI_DEVICE, 1255 .instance_size = sizeof(UHCIState), 1256 .class_size = sizeof(UHCIPCIDeviceClass), 1257 .abstract = true, 1258 .class_init = uhci_class_init, 1259 .interfaces = (InterfaceInfo[]) { 1260 { INTERFACE_CONVENTIONAL_PCI_DEVICE }, 1261 { }, 1262 }, 1263 }; 1264 1265 void uhci_data_class_init(ObjectClass *klass, void *data) 1266 { 1267 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 1268 DeviceClass *dc = DEVICE_CLASS(klass); 1269 UHCIPCIDeviceClass *u = UHCI_CLASS(klass); 1270 UHCIInfo *info = data; 1271 1272 k->realize = info->realize ? info->realize : usb_uhci_common_realize; 1273 k->exit = info->unplug ? usb_uhci_exit : NULL; 1274 k->vendor_id = info->vendor_id; 1275 k->device_id = info->device_id; 1276 k->revision = info->revision; 1277 if (!info->unplug) { 1278 /* uhci controllers in companion setups can't be hotplugged */ 1279 dc->hotpluggable = false; 1280 device_class_set_props(dc, uhci_properties_companion); 1281 } else { 1282 device_class_set_props(dc, uhci_properties_standalone); 1283 } 1284 if (info->notuser) { 1285 dc->user_creatable = false; 1286 } 1287 u->info = *info; 1288 } 1289 1290 static UHCIInfo uhci_info[] = { 1291 { 1292 .name = TYPE_PIIX3_USB_UHCI, 1293 .vendor_id = PCI_VENDOR_ID_INTEL, 1294 .device_id = PCI_DEVICE_ID_INTEL_82371SB_2, 1295 .revision = 0x01, 1296 .irq_pin = 3, 1297 .unplug = true, 1298 },{ 1299 .name = TYPE_PIIX4_USB_UHCI, 1300 .vendor_id = PCI_VENDOR_ID_INTEL, 1301 .device_id = PCI_DEVICE_ID_INTEL_82371AB_2, 1302 .revision = 0x01, 1303 .irq_pin = 3, 1304 .unplug = true, 1305 },{ 1306 .name = TYPE_ICH9_USB_UHCI(1), /* 00:1d.0 */ 1307 .vendor_id = PCI_VENDOR_ID_INTEL, 1308 .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI1, 1309 .revision = 0x03, 1310 .irq_pin = 0, 1311 .unplug = false, 1312 },{ 1313 .name = TYPE_ICH9_USB_UHCI(2), /* 00:1d.1 */ 1314 .vendor_id = PCI_VENDOR_ID_INTEL, 1315 .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI2, 1316 .revision = 0x03, 1317 .irq_pin = 1, 1318 .unplug = false, 1319 },{ 1320 .name = TYPE_ICH9_USB_UHCI(3), /* 00:1d.2 */ 1321 .vendor_id = PCI_VENDOR_ID_INTEL, 1322 .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI3, 1323 .revision = 0x03, 1324 .irq_pin = 2, 1325 .unplug = false, 1326 },{ 1327 .name = TYPE_ICH9_USB_UHCI(4), /* 00:1a.0 */ 1328 .vendor_id = PCI_VENDOR_ID_INTEL, 1329 .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI4, 1330 .revision = 0x03, 1331 .irq_pin = 0, 1332 .unplug = false, 1333 },{ 1334 .name = TYPE_ICH9_USB_UHCI(5), /* 00:1a.1 */ 1335 .vendor_id = PCI_VENDOR_ID_INTEL, 1336 .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI5, 1337 .revision = 0x03, 1338 .irq_pin = 1, 1339 .unplug = false, 1340 },{ 1341 .name = TYPE_ICH9_USB_UHCI(6), /* 00:1a.2 */ 1342 .vendor_id = PCI_VENDOR_ID_INTEL, 1343 .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI6, 1344 .revision = 0x03, 1345 .irq_pin = 2, 1346 .unplug = false, 1347 } 1348 }; 1349 1350 static void uhci_register_types(void) 1351 { 1352 TypeInfo uhci_type_info = { 1353 .parent = TYPE_UHCI, 1354 .class_init = uhci_data_class_init, 1355 }; 1356 int i; 1357 1358 type_register_static(&uhci_pci_type_info); 1359 1360 for (i = 0; i < ARRAY_SIZE(uhci_info); i++) { 1361 uhci_type_info.name = uhci_info[i].name; 1362 uhci_type_info.class_data = uhci_info + i; 1363 type_register(&uhci_type_info); 1364 } 1365 } 1366 1367 type_init(uhci_register_types) 1368