1 /* 2 * QEMU USB OHCI Emulation 3 * Copyright (c) 2004 Gianni Tedesco 4 * Copyright (c) 2006 CodeSourcery 5 * Copyright (c) 2006 Openedhand Ltd. 6 * 7 * This library is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU Lesser General Public 9 * License as published by the Free Software Foundation; either 10 * version 2 of the License, or (at your option) any later version. 11 * 12 * This library is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 15 * Lesser General Public License for more details. 16 * 17 * You should have received a copy of the GNU Lesser General Public 18 * License along with this library; if not, see <http://www.gnu.org/licenses/>. 19 * 20 * TODO: 21 * o Isochronous transfers 22 * o Allocate bandwidth in frames properly 23 * o Disable timers when nothing needs to be done, or remove timer usage 24 * all together. 25 * o BIOS work to boot from USB storage 26 */ 27 28 #include "hw/hw.h" 29 #include "qemu/timer.h" 30 #include "hw/usb.h" 31 #include "hw/pci/pci.h" 32 #include "hw/sysbus.h" 33 #include "hw/qdev-dma.h" 34 35 //#define DEBUG_OHCI 36 /* Dump packet contents. */ 37 //#define DEBUG_PACKET 38 //#define DEBUG_ISOCH 39 /* This causes frames to occur 1000x slower */ 40 //#define OHCI_TIME_WARP 1 41 42 #ifdef DEBUG_OHCI 43 #define DPRINTF printf 44 #else 45 #define DPRINTF(...) 46 #endif 47 48 /* Number of Downstream Ports on the root hub. */ 49 50 #define OHCI_MAX_PORTS 15 51 52 static int64_t usb_frame_time; 53 static int64_t usb_bit_time; 54 55 typedef struct OHCIPort { 56 USBPort port; 57 uint32_t ctrl; 58 } OHCIPort; 59 60 typedef struct { 61 USBBus bus; 62 qemu_irq irq; 63 MemoryRegion mem; 64 AddressSpace *as; 65 int num_ports; 66 const char *name; 67 68 QEMUTimer *eof_timer; 69 int64_t sof_time; 70 71 /* OHCI state */ 72 /* Control partition */ 73 uint32_t ctl, status; 74 uint32_t intr_status; 75 uint32_t intr; 76 77 /* memory pointer partition */ 78 uint32_t hcca; 79 uint32_t ctrl_head, ctrl_cur; 80 uint32_t bulk_head, bulk_cur; 81 uint32_t per_cur; 82 uint32_t done; 83 int done_count; 84 85 /* Frame counter partition */ 86 uint32_t fsmps:15; 87 uint32_t fit:1; 88 uint32_t fi:14; 89 uint32_t frt:1; 90 uint16_t frame_number; 91 uint16_t padding; 92 uint32_t pstart; 93 uint32_t lst; 94 95 /* Root Hub partition */ 96 uint32_t rhdesc_a, rhdesc_b; 97 uint32_t rhstatus; 98 OHCIPort rhport[OHCI_MAX_PORTS]; 99 100 /* PXA27x Non-OHCI events */ 101 uint32_t hstatus; 102 uint32_t hmask; 103 uint32_t hreset; 104 uint32_t htest; 105 106 /* SM501 local memory offset */ 107 dma_addr_t localmem_base; 108 109 /* Active packets. */ 110 uint32_t old_ctl; 111 USBPacket usb_packet; 112 uint8_t usb_buf[8192]; 113 uint32_t async_td; 114 int async_complete; 115 116 } OHCIState; 117 118 /* Host Controller Communications Area */ 119 struct ohci_hcca { 120 uint32_t intr[32]; 121 uint16_t frame, pad; 122 uint32_t done; 123 }; 124 #define HCCA_WRITEBACK_OFFSET offsetof(struct ohci_hcca, frame) 125 #define HCCA_WRITEBACK_SIZE 8 /* frame, pad, done */ 126 127 #define ED_WBACK_OFFSET offsetof(struct ohci_ed, head) 128 #define ED_WBACK_SIZE 4 129 130 static void ohci_bus_stop(OHCIState *ohci); 131 static void ohci_async_cancel_device(OHCIState *ohci, USBDevice *dev); 132 133 /* Bitfields for the first word of an Endpoint Desciptor. */ 134 #define OHCI_ED_FA_SHIFT 0 135 #define OHCI_ED_FA_MASK (0x7f<<OHCI_ED_FA_SHIFT) 136 #define OHCI_ED_EN_SHIFT 7 137 #define OHCI_ED_EN_MASK (0xf<<OHCI_ED_EN_SHIFT) 138 #define OHCI_ED_D_SHIFT 11 139 #define OHCI_ED_D_MASK (3<<OHCI_ED_D_SHIFT) 140 #define OHCI_ED_S (1<<13) 141 #define OHCI_ED_K (1<<14) 142 #define OHCI_ED_F (1<<15) 143 #define OHCI_ED_MPS_SHIFT 16 144 #define OHCI_ED_MPS_MASK (0x7ff<<OHCI_ED_MPS_SHIFT) 145 146 /* Flags in the head field of an Endpoint Desciptor. */ 147 #define OHCI_ED_H 1 148 #define OHCI_ED_C 2 149 150 /* Bitfields for the first word of a Transfer Desciptor. */ 151 #define OHCI_TD_R (1<<18) 152 #define OHCI_TD_DP_SHIFT 19 153 #define OHCI_TD_DP_MASK (3<<OHCI_TD_DP_SHIFT) 154 #define OHCI_TD_DI_SHIFT 21 155 #define OHCI_TD_DI_MASK (7<<OHCI_TD_DI_SHIFT) 156 #define OHCI_TD_T0 (1<<24) 157 #define OHCI_TD_T1 (1<<25) 158 #define OHCI_TD_EC_SHIFT 26 159 #define OHCI_TD_EC_MASK (3<<OHCI_TD_EC_SHIFT) 160 #define OHCI_TD_CC_SHIFT 28 161 #define OHCI_TD_CC_MASK (0xf<<OHCI_TD_CC_SHIFT) 162 163 /* Bitfields for the first word of an Isochronous Transfer Desciptor. */ 164 /* CC & DI - same as in the General Transfer Desciptor */ 165 #define OHCI_TD_SF_SHIFT 0 166 #define OHCI_TD_SF_MASK (0xffff<<OHCI_TD_SF_SHIFT) 167 #define OHCI_TD_FC_SHIFT 24 168 #define OHCI_TD_FC_MASK (7<<OHCI_TD_FC_SHIFT) 169 170 /* Isochronous Transfer Desciptor - Offset / PacketStatusWord */ 171 #define OHCI_TD_PSW_CC_SHIFT 12 172 #define OHCI_TD_PSW_CC_MASK (0xf<<OHCI_TD_PSW_CC_SHIFT) 173 #define OHCI_TD_PSW_SIZE_SHIFT 0 174 #define OHCI_TD_PSW_SIZE_MASK (0xfff<<OHCI_TD_PSW_SIZE_SHIFT) 175 176 #define OHCI_PAGE_MASK 0xfffff000 177 #define OHCI_OFFSET_MASK 0xfff 178 179 #define OHCI_DPTR_MASK 0xfffffff0 180 181 #define OHCI_BM(val, field) \ 182 (((val) & OHCI_##field##_MASK) >> OHCI_##field##_SHIFT) 183 184 #define OHCI_SET_BM(val, field, newval) do { \ 185 val &= ~OHCI_##field##_MASK; \ 186 val |= ((newval) << OHCI_##field##_SHIFT) & OHCI_##field##_MASK; \ 187 } while(0) 188 189 /* endpoint descriptor */ 190 struct ohci_ed { 191 uint32_t flags; 192 uint32_t tail; 193 uint32_t head; 194 uint32_t next; 195 }; 196 197 /* General transfer descriptor */ 198 struct ohci_td { 199 uint32_t flags; 200 uint32_t cbp; 201 uint32_t next; 202 uint32_t be; 203 }; 204 205 /* Isochronous transfer descriptor */ 206 struct ohci_iso_td { 207 uint32_t flags; 208 uint32_t bp; 209 uint32_t next; 210 uint32_t be; 211 uint16_t offset[8]; 212 }; 213 214 #define USB_HZ 12000000 215 216 /* OHCI Local stuff */ 217 #define OHCI_CTL_CBSR ((1<<0)|(1<<1)) 218 #define OHCI_CTL_PLE (1<<2) 219 #define OHCI_CTL_IE (1<<3) 220 #define OHCI_CTL_CLE (1<<4) 221 #define OHCI_CTL_BLE (1<<5) 222 #define OHCI_CTL_HCFS ((1<<6)|(1<<7)) 223 #define OHCI_USB_RESET 0x00 224 #define OHCI_USB_RESUME 0x40 225 #define OHCI_USB_OPERATIONAL 0x80 226 #define OHCI_USB_SUSPEND 0xc0 227 #define OHCI_CTL_IR (1<<8) 228 #define OHCI_CTL_RWC (1<<9) 229 #define OHCI_CTL_RWE (1<<10) 230 231 #define OHCI_STATUS_HCR (1<<0) 232 #define OHCI_STATUS_CLF (1<<1) 233 #define OHCI_STATUS_BLF (1<<2) 234 #define OHCI_STATUS_OCR (1<<3) 235 #define OHCI_STATUS_SOC ((1<<6)|(1<<7)) 236 237 #define OHCI_INTR_SO (1<<0) /* Scheduling overrun */ 238 #define OHCI_INTR_WD (1<<1) /* HcDoneHead writeback */ 239 #define OHCI_INTR_SF (1<<2) /* Start of frame */ 240 #define OHCI_INTR_RD (1<<3) /* Resume detect */ 241 #define OHCI_INTR_UE (1<<4) /* Unrecoverable error */ 242 #define OHCI_INTR_FNO (1<<5) /* Frame number overflow */ 243 #define OHCI_INTR_RHSC (1<<6) /* Root hub status change */ 244 #define OHCI_INTR_OC (1<<30) /* Ownership change */ 245 #define OHCI_INTR_MIE (1<<31) /* Master Interrupt Enable */ 246 247 #define OHCI_HCCA_SIZE 0x100 248 #define OHCI_HCCA_MASK 0xffffff00 249 250 #define OHCI_EDPTR_MASK 0xfffffff0 251 252 #define OHCI_FMI_FI 0x00003fff 253 #define OHCI_FMI_FSMPS 0xffff0000 254 #define OHCI_FMI_FIT 0x80000000 255 256 #define OHCI_FR_RT (1<<31) 257 258 #define OHCI_LS_THRESH 0x628 259 260 #define OHCI_RHA_RW_MASK 0x00000000 /* Mask of supported features. */ 261 #define OHCI_RHA_PSM (1<<8) 262 #define OHCI_RHA_NPS (1<<9) 263 #define OHCI_RHA_DT (1<<10) 264 #define OHCI_RHA_OCPM (1<<11) 265 #define OHCI_RHA_NOCP (1<<12) 266 #define OHCI_RHA_POTPGT_MASK 0xff000000 267 268 #define OHCI_RHS_LPS (1<<0) 269 #define OHCI_RHS_OCI (1<<1) 270 #define OHCI_RHS_DRWE (1<<15) 271 #define OHCI_RHS_LPSC (1<<16) 272 #define OHCI_RHS_OCIC (1<<17) 273 #define OHCI_RHS_CRWE (1<<31) 274 275 #define OHCI_PORT_CCS (1<<0) 276 #define OHCI_PORT_PES (1<<1) 277 #define OHCI_PORT_PSS (1<<2) 278 #define OHCI_PORT_POCI (1<<3) 279 #define OHCI_PORT_PRS (1<<4) 280 #define OHCI_PORT_PPS (1<<8) 281 #define OHCI_PORT_LSDA (1<<9) 282 #define OHCI_PORT_CSC (1<<16) 283 #define OHCI_PORT_PESC (1<<17) 284 #define OHCI_PORT_PSSC (1<<18) 285 #define OHCI_PORT_OCIC (1<<19) 286 #define OHCI_PORT_PRSC (1<<20) 287 #define OHCI_PORT_WTC (OHCI_PORT_CSC|OHCI_PORT_PESC|OHCI_PORT_PSSC \ 288 |OHCI_PORT_OCIC|OHCI_PORT_PRSC) 289 290 #define OHCI_TD_DIR_SETUP 0x0 291 #define OHCI_TD_DIR_OUT 0x1 292 #define OHCI_TD_DIR_IN 0x2 293 #define OHCI_TD_DIR_RESERVED 0x3 294 295 #define OHCI_CC_NOERROR 0x0 296 #define OHCI_CC_CRC 0x1 297 #define OHCI_CC_BITSTUFFING 0x2 298 #define OHCI_CC_DATATOGGLEMISMATCH 0x3 299 #define OHCI_CC_STALL 0x4 300 #define OHCI_CC_DEVICENOTRESPONDING 0x5 301 #define OHCI_CC_PIDCHECKFAILURE 0x6 302 #define OHCI_CC_UNDEXPETEDPID 0x7 303 #define OHCI_CC_DATAOVERRUN 0x8 304 #define OHCI_CC_DATAUNDERRUN 0x9 305 #define OHCI_CC_BUFFEROVERRUN 0xc 306 #define OHCI_CC_BUFFERUNDERRUN 0xd 307 308 #define OHCI_HRESET_FSBIR (1 << 0) 309 310 static void ohci_die(OHCIState *ohci); 311 312 /* Update IRQ levels */ 313 static inline void ohci_intr_update(OHCIState *ohci) 314 { 315 int level = 0; 316 317 if ((ohci->intr & OHCI_INTR_MIE) && 318 (ohci->intr_status & ohci->intr)) 319 level = 1; 320 321 qemu_set_irq(ohci->irq, level); 322 } 323 324 /* Set an interrupt */ 325 static inline void ohci_set_interrupt(OHCIState *ohci, uint32_t intr) 326 { 327 ohci->intr_status |= intr; 328 ohci_intr_update(ohci); 329 } 330 331 /* Attach or detach a device on a root hub port. */ 332 static void ohci_attach(USBPort *port1) 333 { 334 OHCIState *s = port1->opaque; 335 OHCIPort *port = &s->rhport[port1->index]; 336 uint32_t old_state = port->ctrl; 337 338 /* set connect status */ 339 port->ctrl |= OHCI_PORT_CCS | OHCI_PORT_CSC; 340 341 /* update speed */ 342 if (port->port.dev->speed == USB_SPEED_LOW) { 343 port->ctrl |= OHCI_PORT_LSDA; 344 } else { 345 port->ctrl &= ~OHCI_PORT_LSDA; 346 } 347 348 /* notify of remote-wakeup */ 349 if ((s->ctl & OHCI_CTL_HCFS) == OHCI_USB_SUSPEND) { 350 ohci_set_interrupt(s, OHCI_INTR_RD); 351 } 352 353 DPRINTF("usb-ohci: Attached port %d\n", port1->index); 354 355 if (old_state != port->ctrl) { 356 ohci_set_interrupt(s, OHCI_INTR_RHSC); 357 } 358 } 359 360 static void ohci_detach(USBPort *port1) 361 { 362 OHCIState *s = port1->opaque; 363 OHCIPort *port = &s->rhport[port1->index]; 364 uint32_t old_state = port->ctrl; 365 366 ohci_async_cancel_device(s, port1->dev); 367 368 /* set connect status */ 369 if (port->ctrl & OHCI_PORT_CCS) { 370 port->ctrl &= ~OHCI_PORT_CCS; 371 port->ctrl |= OHCI_PORT_CSC; 372 } 373 /* disable port */ 374 if (port->ctrl & OHCI_PORT_PES) { 375 port->ctrl &= ~OHCI_PORT_PES; 376 port->ctrl |= OHCI_PORT_PESC; 377 } 378 DPRINTF("usb-ohci: Detached port %d\n", port1->index); 379 380 if (old_state != port->ctrl) { 381 ohci_set_interrupt(s, OHCI_INTR_RHSC); 382 } 383 } 384 385 static void ohci_wakeup(USBPort *port1) 386 { 387 OHCIState *s = port1->opaque; 388 OHCIPort *port = &s->rhport[port1->index]; 389 uint32_t intr = 0; 390 if (port->ctrl & OHCI_PORT_PSS) { 391 DPRINTF("usb-ohci: port %d: wakeup\n", port1->index); 392 port->ctrl |= OHCI_PORT_PSSC; 393 port->ctrl &= ~OHCI_PORT_PSS; 394 intr = OHCI_INTR_RHSC; 395 } 396 /* Note that the controller can be suspended even if this port is not */ 397 if ((s->ctl & OHCI_CTL_HCFS) == OHCI_USB_SUSPEND) { 398 DPRINTF("usb-ohci: remote-wakeup: SUSPEND->RESUME\n"); 399 /* This is the one state transition the controller can do by itself */ 400 s->ctl &= ~OHCI_CTL_HCFS; 401 s->ctl |= OHCI_USB_RESUME; 402 /* In suspend mode only ResumeDetected is possible, not RHSC: 403 * see the OHCI spec 5.1.2.3. 404 */ 405 intr = OHCI_INTR_RD; 406 } 407 ohci_set_interrupt(s, intr); 408 } 409 410 static void ohci_child_detach(USBPort *port1, USBDevice *child) 411 { 412 OHCIState *s = port1->opaque; 413 414 ohci_async_cancel_device(s, child); 415 } 416 417 static USBDevice *ohci_find_device(OHCIState *ohci, uint8_t addr) 418 { 419 USBDevice *dev; 420 int i; 421 422 for (i = 0; i < ohci->num_ports; i++) { 423 if ((ohci->rhport[i].ctrl & OHCI_PORT_PES) == 0) { 424 continue; 425 } 426 dev = usb_find_device(&ohci->rhport[i].port, addr); 427 if (dev != NULL) { 428 return dev; 429 } 430 } 431 return NULL; 432 } 433 434 static void ohci_stop_endpoints(OHCIState *ohci) 435 { 436 USBDevice *dev; 437 int i, j; 438 439 for (i = 0; i < ohci->num_ports; i++) { 440 dev = ohci->rhport[i].port.dev; 441 if (dev && dev->attached) { 442 usb_device_ep_stopped(dev, &dev->ep_ctl); 443 for (j = 0; j < USB_MAX_ENDPOINTS; j++) { 444 usb_device_ep_stopped(dev, &dev->ep_in[j]); 445 usb_device_ep_stopped(dev, &dev->ep_out[j]); 446 } 447 } 448 } 449 } 450 451 /* Reset the controller */ 452 static void ohci_reset(void *opaque) 453 { 454 OHCIState *ohci = opaque; 455 OHCIPort *port; 456 int i; 457 458 ohci_bus_stop(ohci); 459 ohci->ctl = 0; 460 ohci->old_ctl = 0; 461 ohci->status = 0; 462 ohci->intr_status = 0; 463 ohci->intr = OHCI_INTR_MIE; 464 465 ohci->hcca = 0; 466 ohci->ctrl_head = ohci->ctrl_cur = 0; 467 ohci->bulk_head = ohci->bulk_cur = 0; 468 ohci->per_cur = 0; 469 ohci->done = 0; 470 ohci->done_count = 7; 471 472 /* FSMPS is marked TBD in OCHI 1.0, what gives ffs? 473 * I took the value linux sets ... 474 */ 475 ohci->fsmps = 0x2778; 476 ohci->fi = 0x2edf; 477 ohci->fit = 0; 478 ohci->frt = 0; 479 ohci->frame_number = 0; 480 ohci->pstart = 0; 481 ohci->lst = OHCI_LS_THRESH; 482 483 ohci->rhdesc_a = OHCI_RHA_NPS | ohci->num_ports; 484 ohci->rhdesc_b = 0x0; /* Impl. specific */ 485 ohci->rhstatus = 0; 486 487 for (i = 0; i < ohci->num_ports; i++) 488 { 489 port = &ohci->rhport[i]; 490 port->ctrl = 0; 491 if (port->port.dev && port->port.dev->attached) { 492 usb_port_reset(&port->port); 493 } 494 } 495 if (ohci->async_td) { 496 usb_cancel_packet(&ohci->usb_packet); 497 ohci->async_td = 0; 498 } 499 ohci_stop_endpoints(ohci); 500 DPRINTF("usb-ohci: Reset %s\n", ohci->name); 501 } 502 503 /* Get an array of dwords from main memory */ 504 static inline int get_dwords(OHCIState *ohci, 505 dma_addr_t addr, uint32_t *buf, int num) 506 { 507 int i; 508 509 addr += ohci->localmem_base; 510 511 for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { 512 if (dma_memory_read(ohci->as, addr, buf, sizeof(*buf))) { 513 return -1; 514 } 515 *buf = le32_to_cpu(*buf); 516 } 517 518 return 0; 519 } 520 521 /* Put an array of dwords in to main memory */ 522 static inline int put_dwords(OHCIState *ohci, 523 dma_addr_t addr, uint32_t *buf, int num) 524 { 525 int i; 526 527 addr += ohci->localmem_base; 528 529 for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { 530 uint32_t tmp = cpu_to_le32(*buf); 531 if (dma_memory_write(ohci->as, addr, &tmp, sizeof(tmp))) { 532 return -1; 533 } 534 } 535 536 return 0; 537 } 538 539 /* Get an array of words from main memory */ 540 static inline int get_words(OHCIState *ohci, 541 dma_addr_t addr, uint16_t *buf, int num) 542 { 543 int i; 544 545 addr += ohci->localmem_base; 546 547 for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { 548 if (dma_memory_read(ohci->as, addr, buf, sizeof(*buf))) { 549 return -1; 550 } 551 *buf = le16_to_cpu(*buf); 552 } 553 554 return 0; 555 } 556 557 /* Put an array of words in to main memory */ 558 static inline int put_words(OHCIState *ohci, 559 dma_addr_t addr, uint16_t *buf, int num) 560 { 561 int i; 562 563 addr += ohci->localmem_base; 564 565 for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { 566 uint16_t tmp = cpu_to_le16(*buf); 567 if (dma_memory_write(ohci->as, addr, &tmp, sizeof(tmp))) { 568 return -1; 569 } 570 } 571 572 return 0; 573 } 574 575 static inline int ohci_read_ed(OHCIState *ohci, 576 dma_addr_t addr, struct ohci_ed *ed) 577 { 578 return get_dwords(ohci, addr, (uint32_t *)ed, sizeof(*ed) >> 2); 579 } 580 581 static inline int ohci_read_td(OHCIState *ohci, 582 dma_addr_t addr, struct ohci_td *td) 583 { 584 return get_dwords(ohci, addr, (uint32_t *)td, sizeof(*td) >> 2); 585 } 586 587 static inline int ohci_read_iso_td(OHCIState *ohci, 588 dma_addr_t addr, struct ohci_iso_td *td) 589 { 590 return get_dwords(ohci, addr, (uint32_t *)td, 4) || 591 get_words(ohci, addr + 16, td->offset, 8); 592 } 593 594 static inline int ohci_read_hcca(OHCIState *ohci, 595 dma_addr_t addr, struct ohci_hcca *hcca) 596 { 597 return dma_memory_read(ohci->as, addr + ohci->localmem_base, 598 hcca, sizeof(*hcca)); 599 } 600 601 static inline int ohci_put_ed(OHCIState *ohci, 602 dma_addr_t addr, struct ohci_ed *ed) 603 { 604 /* ed->tail is under control of the HCD. 605 * Since just ed->head is changed by HC, just write back this 606 */ 607 608 return put_dwords(ohci, addr + ED_WBACK_OFFSET, 609 (uint32_t *)((char *)ed + ED_WBACK_OFFSET), 610 ED_WBACK_SIZE >> 2); 611 } 612 613 static inline int ohci_put_td(OHCIState *ohci, 614 dma_addr_t addr, struct ohci_td *td) 615 { 616 return put_dwords(ohci, addr, (uint32_t *)td, sizeof(*td) >> 2); 617 } 618 619 static inline int ohci_put_iso_td(OHCIState *ohci, 620 dma_addr_t addr, struct ohci_iso_td *td) 621 { 622 return put_dwords(ohci, addr, (uint32_t *)td, 4 || 623 put_words(ohci, addr + 16, td->offset, 8)); 624 } 625 626 static inline int ohci_put_hcca(OHCIState *ohci, 627 dma_addr_t addr, struct ohci_hcca *hcca) 628 { 629 return dma_memory_write(ohci->as, 630 addr + ohci->localmem_base + HCCA_WRITEBACK_OFFSET, 631 (char *)hcca + HCCA_WRITEBACK_OFFSET, 632 HCCA_WRITEBACK_SIZE); 633 } 634 635 /* Read/Write the contents of a TD from/to main memory. */ 636 static int ohci_copy_td(OHCIState *ohci, struct ohci_td *td, 637 uint8_t *buf, int len, DMADirection dir) 638 { 639 dma_addr_t ptr, n; 640 641 ptr = td->cbp; 642 n = 0x1000 - (ptr & 0xfff); 643 if (n > len) 644 n = len; 645 646 if (dma_memory_rw(ohci->as, ptr + ohci->localmem_base, buf, n, dir)) { 647 return -1; 648 } 649 if (n == len) { 650 return 0; 651 } 652 ptr = td->be & ~0xfffu; 653 buf += n; 654 if (dma_memory_rw(ohci->as, ptr + ohci->localmem_base, buf, 655 len - n, dir)) { 656 return -1; 657 } 658 return 0; 659 } 660 661 /* Read/Write the contents of an ISO TD from/to main memory. */ 662 static int ohci_copy_iso_td(OHCIState *ohci, 663 uint32_t start_addr, uint32_t end_addr, 664 uint8_t *buf, int len, DMADirection dir) 665 { 666 dma_addr_t ptr, n; 667 668 ptr = start_addr; 669 n = 0x1000 - (ptr & 0xfff); 670 if (n > len) 671 n = len; 672 673 if (dma_memory_rw(ohci->as, ptr + ohci->localmem_base, buf, n, dir)) { 674 return -1; 675 } 676 if (n == len) { 677 return 0; 678 } 679 ptr = end_addr & ~0xfffu; 680 buf += n; 681 if (dma_memory_rw(ohci->as, ptr + ohci->localmem_base, buf, 682 len - n, dir)) { 683 return -1; 684 } 685 return 0; 686 } 687 688 static void ohci_process_lists(OHCIState *ohci, int completion); 689 690 static void ohci_async_complete_packet(USBPort *port, USBPacket *packet) 691 { 692 OHCIState *ohci = container_of(packet, OHCIState, usb_packet); 693 #ifdef DEBUG_PACKET 694 DPRINTF("Async packet complete\n"); 695 #endif 696 ohci->async_complete = 1; 697 ohci_process_lists(ohci, 1); 698 } 699 700 #define USUB(a, b) ((int16_t)((uint16_t)(a) - (uint16_t)(b))) 701 702 static int ohci_service_iso_td(OHCIState *ohci, struct ohci_ed *ed, 703 int completion) 704 { 705 int dir; 706 size_t len = 0; 707 #ifdef DEBUG_ISOCH 708 const char *str = NULL; 709 #endif 710 int pid; 711 int ret; 712 int i; 713 USBDevice *dev; 714 USBEndpoint *ep; 715 struct ohci_iso_td iso_td; 716 uint32_t addr; 717 uint16_t starting_frame; 718 int16_t relative_frame_number; 719 int frame_count; 720 uint32_t start_offset, next_offset, end_offset = 0; 721 uint32_t start_addr, end_addr; 722 723 addr = ed->head & OHCI_DPTR_MASK; 724 725 if (ohci_read_iso_td(ohci, addr, &iso_td)) { 726 printf("usb-ohci: ISO_TD read error at %x\n", addr); 727 ohci_die(ohci); 728 return 0; 729 } 730 731 starting_frame = OHCI_BM(iso_td.flags, TD_SF); 732 frame_count = OHCI_BM(iso_td.flags, TD_FC); 733 relative_frame_number = USUB(ohci->frame_number, starting_frame); 734 735 #ifdef DEBUG_ISOCH 736 printf("--- ISO_TD ED head 0x%.8x tailp 0x%.8x\n" 737 "0x%.8x 0x%.8x 0x%.8x 0x%.8x\n" 738 "0x%.8x 0x%.8x 0x%.8x 0x%.8x\n" 739 "0x%.8x 0x%.8x 0x%.8x 0x%.8x\n" 740 "frame_number 0x%.8x starting_frame 0x%.8x\n" 741 "frame_count 0x%.8x relative %d\n" 742 "di 0x%.8x cc 0x%.8x\n", 743 ed->head & OHCI_DPTR_MASK, ed->tail & OHCI_DPTR_MASK, 744 iso_td.flags, iso_td.bp, iso_td.next, iso_td.be, 745 iso_td.offset[0], iso_td.offset[1], iso_td.offset[2], iso_td.offset[3], 746 iso_td.offset[4], iso_td.offset[5], iso_td.offset[6], iso_td.offset[7], 747 ohci->frame_number, starting_frame, 748 frame_count, relative_frame_number, 749 OHCI_BM(iso_td.flags, TD_DI), OHCI_BM(iso_td.flags, TD_CC)); 750 #endif 751 752 if (relative_frame_number < 0) { 753 DPRINTF("usb-ohci: ISO_TD R=%d < 0\n", relative_frame_number); 754 return 1; 755 } else if (relative_frame_number > frame_count) { 756 /* ISO TD expired - retire the TD to the Done Queue and continue with 757 the next ISO TD of the same ED */ 758 DPRINTF("usb-ohci: ISO_TD R=%d > FC=%d\n", relative_frame_number, 759 frame_count); 760 OHCI_SET_BM(iso_td.flags, TD_CC, OHCI_CC_DATAOVERRUN); 761 ed->head &= ~OHCI_DPTR_MASK; 762 ed->head |= (iso_td.next & OHCI_DPTR_MASK); 763 iso_td.next = ohci->done; 764 ohci->done = addr; 765 i = OHCI_BM(iso_td.flags, TD_DI); 766 if (i < ohci->done_count) 767 ohci->done_count = i; 768 if (ohci_put_iso_td(ohci, addr, &iso_td)) { 769 ohci_die(ohci); 770 return 1; 771 } 772 return 0; 773 } 774 775 dir = OHCI_BM(ed->flags, ED_D); 776 switch (dir) { 777 case OHCI_TD_DIR_IN: 778 #ifdef DEBUG_ISOCH 779 str = "in"; 780 #endif 781 pid = USB_TOKEN_IN; 782 break; 783 case OHCI_TD_DIR_OUT: 784 #ifdef DEBUG_ISOCH 785 str = "out"; 786 #endif 787 pid = USB_TOKEN_OUT; 788 break; 789 case OHCI_TD_DIR_SETUP: 790 #ifdef DEBUG_ISOCH 791 str = "setup"; 792 #endif 793 pid = USB_TOKEN_SETUP; 794 break; 795 default: 796 printf("usb-ohci: Bad direction %d\n", dir); 797 return 1; 798 } 799 800 if (!iso_td.bp || !iso_td.be) { 801 printf("usb-ohci: ISO_TD bp 0x%.8x be 0x%.8x\n", iso_td.bp, iso_td.be); 802 return 1; 803 } 804 805 start_offset = iso_td.offset[relative_frame_number]; 806 next_offset = iso_td.offset[relative_frame_number + 1]; 807 808 if (!(OHCI_BM(start_offset, TD_PSW_CC) & 0xe) || 809 ((relative_frame_number < frame_count) && 810 !(OHCI_BM(next_offset, TD_PSW_CC) & 0xe))) { 811 printf("usb-ohci: ISO_TD cc != not accessed 0x%.8x 0x%.8x\n", 812 start_offset, next_offset); 813 return 1; 814 } 815 816 if ((relative_frame_number < frame_count) && (start_offset > next_offset)) { 817 printf("usb-ohci: ISO_TD start_offset=0x%.8x > next_offset=0x%.8x\n", 818 start_offset, next_offset); 819 return 1; 820 } 821 822 if ((start_offset & 0x1000) == 0) { 823 start_addr = (iso_td.bp & OHCI_PAGE_MASK) | 824 (start_offset & OHCI_OFFSET_MASK); 825 } else { 826 start_addr = (iso_td.be & OHCI_PAGE_MASK) | 827 (start_offset & OHCI_OFFSET_MASK); 828 } 829 830 if (relative_frame_number < frame_count) { 831 end_offset = next_offset - 1; 832 if ((end_offset & 0x1000) == 0) { 833 end_addr = (iso_td.bp & OHCI_PAGE_MASK) | 834 (end_offset & OHCI_OFFSET_MASK); 835 } else { 836 end_addr = (iso_td.be & OHCI_PAGE_MASK) | 837 (end_offset & OHCI_OFFSET_MASK); 838 } 839 } else { 840 /* Last packet in the ISO TD */ 841 end_addr = iso_td.be; 842 } 843 844 if ((start_addr & OHCI_PAGE_MASK) != (end_addr & OHCI_PAGE_MASK)) { 845 len = (end_addr & OHCI_OFFSET_MASK) + 0x1001 846 - (start_addr & OHCI_OFFSET_MASK); 847 } else { 848 len = end_addr - start_addr + 1; 849 } 850 851 if (len && dir != OHCI_TD_DIR_IN) { 852 if (ohci_copy_iso_td(ohci, start_addr, end_addr, ohci->usb_buf, len, 853 DMA_DIRECTION_TO_DEVICE)) { 854 ohci_die(ohci); 855 return 1; 856 } 857 } 858 859 if (!completion) { 860 bool int_req = relative_frame_number == frame_count && 861 OHCI_BM(iso_td.flags, TD_DI) == 0; 862 dev = ohci_find_device(ohci, OHCI_BM(ed->flags, ED_FA)); 863 ep = usb_ep_get(dev, pid, OHCI_BM(ed->flags, ED_EN)); 864 usb_packet_setup(&ohci->usb_packet, pid, ep, 0, addr, false, int_req); 865 usb_packet_addbuf(&ohci->usb_packet, ohci->usb_buf, len); 866 usb_handle_packet(dev, &ohci->usb_packet); 867 if (ohci->usb_packet.status == USB_RET_ASYNC) { 868 usb_device_flush_ep_queue(dev, ep); 869 return 1; 870 } 871 } 872 if (ohci->usb_packet.status == USB_RET_SUCCESS) { 873 ret = ohci->usb_packet.actual_length; 874 } else { 875 ret = ohci->usb_packet.status; 876 } 877 878 #ifdef DEBUG_ISOCH 879 printf("so 0x%.8x eo 0x%.8x\nsa 0x%.8x ea 0x%.8x\ndir %s len %zu ret %d\n", 880 start_offset, end_offset, start_addr, end_addr, str, len, ret); 881 #endif 882 883 /* Writeback */ 884 if (dir == OHCI_TD_DIR_IN && ret >= 0 && ret <= len) { 885 /* IN transfer succeeded */ 886 if (ohci_copy_iso_td(ohci, start_addr, end_addr, ohci->usb_buf, ret, 887 DMA_DIRECTION_FROM_DEVICE)) { 888 ohci_die(ohci); 889 return 1; 890 } 891 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, 892 OHCI_CC_NOERROR); 893 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, ret); 894 } else if (dir == OHCI_TD_DIR_OUT && ret == len) { 895 /* OUT transfer succeeded */ 896 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, 897 OHCI_CC_NOERROR); 898 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, 0); 899 } else { 900 if (ret > (ssize_t) len) { 901 printf("usb-ohci: DataOverrun %d > %zu\n", ret, len); 902 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, 903 OHCI_CC_DATAOVERRUN); 904 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, 905 len); 906 } else if (ret >= 0) { 907 printf("usb-ohci: DataUnderrun %d\n", ret); 908 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, 909 OHCI_CC_DATAUNDERRUN); 910 } else { 911 switch (ret) { 912 case USB_RET_IOERROR: 913 case USB_RET_NODEV: 914 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, 915 OHCI_CC_DEVICENOTRESPONDING); 916 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, 917 0); 918 break; 919 case USB_RET_NAK: 920 case USB_RET_STALL: 921 printf("usb-ohci: got NAK/STALL %d\n", ret); 922 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, 923 OHCI_CC_STALL); 924 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, 925 0); 926 break; 927 default: 928 printf("usb-ohci: Bad device response %d\n", ret); 929 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, 930 OHCI_CC_UNDEXPETEDPID); 931 break; 932 } 933 } 934 } 935 936 if (relative_frame_number == frame_count) { 937 /* Last data packet of ISO TD - retire the TD to the Done Queue */ 938 OHCI_SET_BM(iso_td.flags, TD_CC, OHCI_CC_NOERROR); 939 ed->head &= ~OHCI_DPTR_MASK; 940 ed->head |= (iso_td.next & OHCI_DPTR_MASK); 941 iso_td.next = ohci->done; 942 ohci->done = addr; 943 i = OHCI_BM(iso_td.flags, TD_DI); 944 if (i < ohci->done_count) 945 ohci->done_count = i; 946 } 947 if (ohci_put_iso_td(ohci, addr, &iso_td)) { 948 ohci_die(ohci); 949 } 950 return 1; 951 } 952 953 /* Service a transport descriptor. 954 Returns nonzero to terminate processing of this endpoint. */ 955 956 static int ohci_service_td(OHCIState *ohci, struct ohci_ed *ed) 957 { 958 int dir; 959 size_t len = 0, pktlen = 0; 960 #ifdef DEBUG_PACKET 961 const char *str = NULL; 962 #endif 963 int pid; 964 int ret; 965 int i; 966 USBDevice *dev; 967 USBEndpoint *ep; 968 struct ohci_td td; 969 uint32_t addr; 970 int flag_r; 971 int completion; 972 973 addr = ed->head & OHCI_DPTR_MASK; 974 /* See if this TD has already been submitted to the device. */ 975 completion = (addr == ohci->async_td); 976 if (completion && !ohci->async_complete) { 977 #ifdef DEBUG_PACKET 978 DPRINTF("Skipping async TD\n"); 979 #endif 980 return 1; 981 } 982 if (ohci_read_td(ohci, addr, &td)) { 983 fprintf(stderr, "usb-ohci: TD read error at %x\n", addr); 984 ohci_die(ohci); 985 return 0; 986 } 987 988 dir = OHCI_BM(ed->flags, ED_D); 989 switch (dir) { 990 case OHCI_TD_DIR_OUT: 991 case OHCI_TD_DIR_IN: 992 /* Same value. */ 993 break; 994 default: 995 dir = OHCI_BM(td.flags, TD_DP); 996 break; 997 } 998 999 switch (dir) { 1000 case OHCI_TD_DIR_IN: 1001 #ifdef DEBUG_PACKET 1002 str = "in"; 1003 #endif 1004 pid = USB_TOKEN_IN; 1005 break; 1006 case OHCI_TD_DIR_OUT: 1007 #ifdef DEBUG_PACKET 1008 str = "out"; 1009 #endif 1010 pid = USB_TOKEN_OUT; 1011 break; 1012 case OHCI_TD_DIR_SETUP: 1013 #ifdef DEBUG_PACKET 1014 str = "setup"; 1015 #endif 1016 pid = USB_TOKEN_SETUP; 1017 break; 1018 default: 1019 fprintf(stderr, "usb-ohci: Bad direction\n"); 1020 return 1; 1021 } 1022 if (td.cbp && td.be) { 1023 if ((td.cbp & 0xfffff000) != (td.be & 0xfffff000)) { 1024 len = (td.be & 0xfff) + 0x1001 - (td.cbp & 0xfff); 1025 } else { 1026 len = (td.be - td.cbp) + 1; 1027 } 1028 1029 pktlen = len; 1030 if (len && dir != OHCI_TD_DIR_IN) { 1031 /* The endpoint may not allow us to transfer it all now */ 1032 pktlen = (ed->flags & OHCI_ED_MPS_MASK) >> OHCI_ED_MPS_SHIFT; 1033 if (pktlen > len) { 1034 pktlen = len; 1035 } 1036 if (!completion) { 1037 if (ohci_copy_td(ohci, &td, ohci->usb_buf, pktlen, 1038 DMA_DIRECTION_TO_DEVICE)) { 1039 ohci_die(ohci); 1040 } 1041 } 1042 } 1043 } 1044 1045 flag_r = (td.flags & OHCI_TD_R) != 0; 1046 #ifdef DEBUG_PACKET 1047 DPRINTF(" TD @ 0x%.8x %" PRId64 " of %" PRId64 1048 " bytes %s r=%d cbp=0x%.8x be=0x%.8x\n", 1049 addr, (int64_t)pktlen, (int64_t)len, str, flag_r, td.cbp, td.be); 1050 1051 if (pktlen > 0 && dir != OHCI_TD_DIR_IN) { 1052 DPRINTF(" data:"); 1053 for (i = 0; i < pktlen; i++) { 1054 printf(" %.2x", ohci->usb_buf[i]); 1055 } 1056 DPRINTF("\n"); 1057 } 1058 #endif 1059 if (completion) { 1060 ohci->async_td = 0; 1061 ohci->async_complete = 0; 1062 } else { 1063 if (ohci->async_td) { 1064 /* ??? The hardware should allow one active packet per 1065 endpoint. We only allow one active packet per controller. 1066 This should be sufficient as long as devices respond in a 1067 timely manner. 1068 */ 1069 #ifdef DEBUG_PACKET 1070 DPRINTF("Too many pending packets\n"); 1071 #endif 1072 return 1; 1073 } 1074 dev = ohci_find_device(ohci, OHCI_BM(ed->flags, ED_FA)); 1075 ep = usb_ep_get(dev, pid, OHCI_BM(ed->flags, ED_EN)); 1076 usb_packet_setup(&ohci->usb_packet, pid, ep, 0, addr, !flag_r, 1077 OHCI_BM(td.flags, TD_DI) == 0); 1078 usb_packet_addbuf(&ohci->usb_packet, ohci->usb_buf, pktlen); 1079 usb_handle_packet(dev, &ohci->usb_packet); 1080 #ifdef DEBUG_PACKET 1081 DPRINTF("status=%d\n", ohci->usb_packet.status); 1082 #endif 1083 if (ohci->usb_packet.status == USB_RET_ASYNC) { 1084 usb_device_flush_ep_queue(dev, ep); 1085 ohci->async_td = addr; 1086 return 1; 1087 } 1088 } 1089 if (ohci->usb_packet.status == USB_RET_SUCCESS) { 1090 ret = ohci->usb_packet.actual_length; 1091 } else { 1092 ret = ohci->usb_packet.status; 1093 } 1094 1095 if (ret >= 0) { 1096 if (dir == OHCI_TD_DIR_IN) { 1097 if (ohci_copy_td(ohci, &td, ohci->usb_buf, ret, 1098 DMA_DIRECTION_FROM_DEVICE)) { 1099 ohci_die(ohci); 1100 } 1101 #ifdef DEBUG_PACKET 1102 DPRINTF(" data:"); 1103 for (i = 0; i < ret; i++) 1104 printf(" %.2x", ohci->usb_buf[i]); 1105 DPRINTF("\n"); 1106 #endif 1107 } else { 1108 ret = pktlen; 1109 } 1110 } 1111 1112 /* Writeback */ 1113 if (ret == pktlen || (dir == OHCI_TD_DIR_IN && ret >= 0 && flag_r)) { 1114 /* Transmission succeeded. */ 1115 if (ret == len) { 1116 td.cbp = 0; 1117 } else { 1118 if ((td.cbp & 0xfff) + ret > 0xfff) { 1119 td.cbp = (td.be & ~0xfff) + ((td.cbp + ret) & 0xfff); 1120 } else { 1121 td.cbp += ret; 1122 } 1123 } 1124 td.flags |= OHCI_TD_T1; 1125 td.flags ^= OHCI_TD_T0; 1126 OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_NOERROR); 1127 OHCI_SET_BM(td.flags, TD_EC, 0); 1128 1129 if ((dir != OHCI_TD_DIR_IN) && (ret != len)) { 1130 /* Partial packet transfer: TD not ready to retire yet */ 1131 goto exit_no_retire; 1132 } 1133 1134 /* Setting ED_C is part of the TD retirement process */ 1135 ed->head &= ~OHCI_ED_C; 1136 if (td.flags & OHCI_TD_T0) 1137 ed->head |= OHCI_ED_C; 1138 } else { 1139 if (ret >= 0) { 1140 DPRINTF("usb-ohci: Underrun\n"); 1141 OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DATAUNDERRUN); 1142 } else { 1143 switch (ret) { 1144 case USB_RET_IOERROR: 1145 case USB_RET_NODEV: 1146 OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DEVICENOTRESPONDING); 1147 case USB_RET_NAK: 1148 DPRINTF("usb-ohci: got NAK\n"); 1149 return 1; 1150 case USB_RET_STALL: 1151 DPRINTF("usb-ohci: got STALL\n"); 1152 OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_STALL); 1153 break; 1154 case USB_RET_BABBLE: 1155 DPRINTF("usb-ohci: got BABBLE\n"); 1156 OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DATAOVERRUN); 1157 break; 1158 default: 1159 fprintf(stderr, "usb-ohci: Bad device response %d\n", ret); 1160 OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_UNDEXPETEDPID); 1161 OHCI_SET_BM(td.flags, TD_EC, 3); 1162 break; 1163 } 1164 } 1165 ed->head |= OHCI_ED_H; 1166 } 1167 1168 /* Retire this TD */ 1169 ed->head &= ~OHCI_DPTR_MASK; 1170 ed->head |= td.next & OHCI_DPTR_MASK; 1171 td.next = ohci->done; 1172 ohci->done = addr; 1173 i = OHCI_BM(td.flags, TD_DI); 1174 if (i < ohci->done_count) 1175 ohci->done_count = i; 1176 exit_no_retire: 1177 if (ohci_put_td(ohci, addr, &td)) { 1178 ohci_die(ohci); 1179 return 1; 1180 } 1181 return OHCI_BM(td.flags, TD_CC) != OHCI_CC_NOERROR; 1182 } 1183 1184 /* Service an endpoint list. Returns nonzero if active TD were found. */ 1185 static int ohci_service_ed_list(OHCIState *ohci, uint32_t head, int completion) 1186 { 1187 struct ohci_ed ed; 1188 uint32_t next_ed; 1189 uint32_t cur; 1190 int active; 1191 1192 active = 0; 1193 1194 if (head == 0) 1195 return 0; 1196 1197 for (cur = head; cur; cur = next_ed) { 1198 if (ohci_read_ed(ohci, cur, &ed)) { 1199 fprintf(stderr, "usb-ohci: ED read error at %x\n", cur); 1200 ohci_die(ohci); 1201 return 0; 1202 } 1203 1204 next_ed = ed.next & OHCI_DPTR_MASK; 1205 1206 if ((ed.head & OHCI_ED_H) || (ed.flags & OHCI_ED_K)) { 1207 uint32_t addr; 1208 /* Cancel pending packets for ED that have been paused. */ 1209 addr = ed.head & OHCI_DPTR_MASK; 1210 if (ohci->async_td && addr == ohci->async_td) { 1211 usb_cancel_packet(&ohci->usb_packet); 1212 ohci->async_td = 0; 1213 usb_device_ep_stopped(ohci->usb_packet.ep->dev, 1214 ohci->usb_packet.ep); 1215 } 1216 continue; 1217 } 1218 1219 while ((ed.head & OHCI_DPTR_MASK) != ed.tail) { 1220 #ifdef DEBUG_PACKET 1221 DPRINTF("ED @ 0x%.8x fa=%u en=%u d=%u s=%u k=%u f=%u mps=%u " 1222 "h=%u c=%u\n head=0x%.8x tailp=0x%.8x next=0x%.8x\n", cur, 1223 OHCI_BM(ed.flags, ED_FA), OHCI_BM(ed.flags, ED_EN), 1224 OHCI_BM(ed.flags, ED_D), (ed.flags & OHCI_ED_S)!= 0, 1225 (ed.flags & OHCI_ED_K) != 0, (ed.flags & OHCI_ED_F) != 0, 1226 OHCI_BM(ed.flags, ED_MPS), (ed.head & OHCI_ED_H) != 0, 1227 (ed.head & OHCI_ED_C) != 0, ed.head & OHCI_DPTR_MASK, 1228 ed.tail & OHCI_DPTR_MASK, ed.next & OHCI_DPTR_MASK); 1229 #endif 1230 active = 1; 1231 1232 if ((ed.flags & OHCI_ED_F) == 0) { 1233 if (ohci_service_td(ohci, &ed)) 1234 break; 1235 } else { 1236 /* Handle isochronous endpoints */ 1237 if (ohci_service_iso_td(ohci, &ed, completion)) 1238 break; 1239 } 1240 } 1241 1242 if (ohci_put_ed(ohci, cur, &ed)) { 1243 ohci_die(ohci); 1244 return 0; 1245 } 1246 } 1247 1248 return active; 1249 } 1250 1251 /* Generate a SOF event, and set a timer for EOF */ 1252 static void ohci_sof(OHCIState *ohci) 1253 { 1254 ohci->sof_time = qemu_get_clock_ns(vm_clock); 1255 qemu_mod_timer(ohci->eof_timer, ohci->sof_time + usb_frame_time); 1256 ohci_set_interrupt(ohci, OHCI_INTR_SF); 1257 } 1258 1259 /* Process Control and Bulk lists. */ 1260 static void ohci_process_lists(OHCIState *ohci, int completion) 1261 { 1262 if ((ohci->ctl & OHCI_CTL_CLE) && (ohci->status & OHCI_STATUS_CLF)) { 1263 if (ohci->ctrl_cur && ohci->ctrl_cur != ohci->ctrl_head) { 1264 DPRINTF("usb-ohci: head %x, cur %x\n", 1265 ohci->ctrl_head, ohci->ctrl_cur); 1266 } 1267 if (!ohci_service_ed_list(ohci, ohci->ctrl_head, completion)) { 1268 ohci->ctrl_cur = 0; 1269 ohci->status &= ~OHCI_STATUS_CLF; 1270 } 1271 } 1272 1273 if ((ohci->ctl & OHCI_CTL_BLE) && (ohci->status & OHCI_STATUS_BLF)) { 1274 if (!ohci_service_ed_list(ohci, ohci->bulk_head, completion)) { 1275 ohci->bulk_cur = 0; 1276 ohci->status &= ~OHCI_STATUS_BLF; 1277 } 1278 } 1279 } 1280 1281 /* Do frame processing on frame boundary */ 1282 static void ohci_frame_boundary(void *opaque) 1283 { 1284 OHCIState *ohci = opaque; 1285 struct ohci_hcca hcca; 1286 1287 if (ohci_read_hcca(ohci, ohci->hcca, &hcca)) { 1288 fprintf(stderr, "usb-ohci: HCCA read error at %x\n", ohci->hcca); 1289 ohci_die(ohci); 1290 return; 1291 } 1292 1293 /* Process all the lists at the end of the frame */ 1294 if (ohci->ctl & OHCI_CTL_PLE) { 1295 int n; 1296 1297 n = ohci->frame_number & 0x1f; 1298 ohci_service_ed_list(ohci, le32_to_cpu(hcca.intr[n]), 0); 1299 } 1300 1301 /* Cancel all pending packets if either of the lists has been disabled. */ 1302 if (ohci->old_ctl & (~ohci->ctl) & (OHCI_CTL_BLE | OHCI_CTL_CLE)) { 1303 if (ohci->async_td) { 1304 usb_cancel_packet(&ohci->usb_packet); 1305 ohci->async_td = 0; 1306 } 1307 ohci_stop_endpoints(ohci); 1308 } 1309 ohci->old_ctl = ohci->ctl; 1310 ohci_process_lists(ohci, 0); 1311 1312 /* Stop if UnrecoverableError happened or ohci_sof will crash */ 1313 if (ohci->intr_status & OHCI_INTR_UE) { 1314 return; 1315 } 1316 1317 /* Frame boundary, so do EOF stuf here */ 1318 ohci->frt = ohci->fit; 1319 1320 /* Increment frame number and take care of endianness. */ 1321 ohci->frame_number = (ohci->frame_number + 1) & 0xffff; 1322 hcca.frame = cpu_to_le16(ohci->frame_number); 1323 1324 if (ohci->done_count == 0 && !(ohci->intr_status & OHCI_INTR_WD)) { 1325 if (!ohci->done) 1326 abort(); 1327 if (ohci->intr & ohci->intr_status) 1328 ohci->done |= 1; 1329 hcca.done = cpu_to_le32(ohci->done); 1330 ohci->done = 0; 1331 ohci->done_count = 7; 1332 ohci_set_interrupt(ohci, OHCI_INTR_WD); 1333 } 1334 1335 if (ohci->done_count != 7 && ohci->done_count != 0) 1336 ohci->done_count--; 1337 1338 /* Do SOF stuff here */ 1339 ohci_sof(ohci); 1340 1341 /* Writeback HCCA */ 1342 if (ohci_put_hcca(ohci, ohci->hcca, &hcca)) { 1343 ohci_die(ohci); 1344 } 1345 } 1346 1347 /* Start sending SOF tokens across the USB bus, lists are processed in 1348 * next frame 1349 */ 1350 static int ohci_bus_start(OHCIState *ohci) 1351 { 1352 ohci->eof_timer = qemu_new_timer_ns(vm_clock, 1353 ohci_frame_boundary, 1354 ohci); 1355 1356 if (ohci->eof_timer == NULL) { 1357 fprintf(stderr, "usb-ohci: %s: qemu_new_timer_ns failed\n", ohci->name); 1358 ohci_die(ohci); 1359 return 0; 1360 } 1361 1362 DPRINTF("usb-ohci: %s: USB Operational\n", ohci->name); 1363 1364 ohci_sof(ohci); 1365 1366 return 1; 1367 } 1368 1369 /* Stop sending SOF tokens on the bus */ 1370 static void ohci_bus_stop(OHCIState *ohci) 1371 { 1372 if (ohci->eof_timer) 1373 qemu_del_timer(ohci->eof_timer); 1374 ohci->eof_timer = NULL; 1375 } 1376 1377 /* Sets a flag in a port status register but only set it if the port is 1378 * connected, if not set ConnectStatusChange flag. If flag is enabled 1379 * return 1. 1380 */ 1381 static int ohci_port_set_if_connected(OHCIState *ohci, int i, uint32_t val) 1382 { 1383 int ret = 1; 1384 1385 /* writing a 0 has no effect */ 1386 if (val == 0) 1387 return 0; 1388 1389 /* If CurrentConnectStatus is cleared we set 1390 * ConnectStatusChange 1391 */ 1392 if (!(ohci->rhport[i].ctrl & OHCI_PORT_CCS)) { 1393 ohci->rhport[i].ctrl |= OHCI_PORT_CSC; 1394 if (ohci->rhstatus & OHCI_RHS_DRWE) { 1395 /* TODO: CSC is a wakeup event */ 1396 } 1397 return 0; 1398 } 1399 1400 if (ohci->rhport[i].ctrl & val) 1401 ret = 0; 1402 1403 /* set the bit */ 1404 ohci->rhport[i].ctrl |= val; 1405 1406 return ret; 1407 } 1408 1409 /* Set the frame interval - frame interval toggle is manipulated by the hcd only */ 1410 static void ohci_set_frame_interval(OHCIState *ohci, uint16_t val) 1411 { 1412 val &= OHCI_FMI_FI; 1413 1414 if (val != ohci->fi) { 1415 DPRINTF("usb-ohci: %s: FrameInterval = 0x%x (%u)\n", 1416 ohci->name, ohci->fi, ohci->fi); 1417 } 1418 1419 ohci->fi = val; 1420 } 1421 1422 static void ohci_port_power(OHCIState *ohci, int i, int p) 1423 { 1424 if (p) { 1425 ohci->rhport[i].ctrl |= OHCI_PORT_PPS; 1426 } else { 1427 ohci->rhport[i].ctrl &= ~(OHCI_PORT_PPS| 1428 OHCI_PORT_CCS| 1429 OHCI_PORT_PSS| 1430 OHCI_PORT_PRS); 1431 } 1432 } 1433 1434 /* Set HcControlRegister */ 1435 static void ohci_set_ctl(OHCIState *ohci, uint32_t val) 1436 { 1437 uint32_t old_state; 1438 uint32_t new_state; 1439 1440 old_state = ohci->ctl & OHCI_CTL_HCFS; 1441 ohci->ctl = val; 1442 new_state = ohci->ctl & OHCI_CTL_HCFS; 1443 1444 /* no state change */ 1445 if (old_state == new_state) 1446 return; 1447 1448 switch (new_state) { 1449 case OHCI_USB_OPERATIONAL: 1450 ohci_bus_start(ohci); 1451 break; 1452 case OHCI_USB_SUSPEND: 1453 ohci_bus_stop(ohci); 1454 DPRINTF("usb-ohci: %s: USB Suspended\n", ohci->name); 1455 break; 1456 case OHCI_USB_RESUME: 1457 DPRINTF("usb-ohci: %s: USB Resume\n", ohci->name); 1458 break; 1459 case OHCI_USB_RESET: 1460 ohci_reset(ohci); 1461 DPRINTF("usb-ohci: %s: USB Reset\n", ohci->name); 1462 break; 1463 } 1464 } 1465 1466 static uint32_t ohci_get_frame_remaining(OHCIState *ohci) 1467 { 1468 uint16_t fr; 1469 int64_t tks; 1470 1471 if ((ohci->ctl & OHCI_CTL_HCFS) != OHCI_USB_OPERATIONAL) 1472 return (ohci->frt << 31); 1473 1474 /* Being in USB operational state guarnatees sof_time was 1475 * set already. 1476 */ 1477 tks = qemu_get_clock_ns(vm_clock) - ohci->sof_time; 1478 1479 /* avoid muldiv if possible */ 1480 if (tks >= usb_frame_time) 1481 return (ohci->frt << 31); 1482 1483 tks = muldiv64(1, tks, usb_bit_time); 1484 fr = (uint16_t)(ohci->fi - tks); 1485 1486 return (ohci->frt << 31) | fr; 1487 } 1488 1489 1490 /* Set root hub status */ 1491 static void ohci_set_hub_status(OHCIState *ohci, uint32_t val) 1492 { 1493 uint32_t old_state; 1494 1495 old_state = ohci->rhstatus; 1496 1497 /* write 1 to clear OCIC */ 1498 if (val & OHCI_RHS_OCIC) 1499 ohci->rhstatus &= ~OHCI_RHS_OCIC; 1500 1501 if (val & OHCI_RHS_LPS) { 1502 int i; 1503 1504 for (i = 0; i < ohci->num_ports; i++) 1505 ohci_port_power(ohci, i, 0); 1506 DPRINTF("usb-ohci: powered down all ports\n"); 1507 } 1508 1509 if (val & OHCI_RHS_LPSC) { 1510 int i; 1511 1512 for (i = 0; i < ohci->num_ports; i++) 1513 ohci_port_power(ohci, i, 1); 1514 DPRINTF("usb-ohci: powered up all ports\n"); 1515 } 1516 1517 if (val & OHCI_RHS_DRWE) 1518 ohci->rhstatus |= OHCI_RHS_DRWE; 1519 1520 if (val & OHCI_RHS_CRWE) 1521 ohci->rhstatus &= ~OHCI_RHS_DRWE; 1522 1523 if (old_state != ohci->rhstatus) 1524 ohci_set_interrupt(ohci, OHCI_INTR_RHSC); 1525 } 1526 1527 /* Set root hub port status */ 1528 static void ohci_port_set_status(OHCIState *ohci, int portnum, uint32_t val) 1529 { 1530 uint32_t old_state; 1531 OHCIPort *port; 1532 1533 port = &ohci->rhport[portnum]; 1534 old_state = port->ctrl; 1535 1536 /* Write to clear CSC, PESC, PSSC, OCIC, PRSC */ 1537 if (val & OHCI_PORT_WTC) 1538 port->ctrl &= ~(val & OHCI_PORT_WTC); 1539 1540 if (val & OHCI_PORT_CCS) 1541 port->ctrl &= ~OHCI_PORT_PES; 1542 1543 ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PES); 1544 1545 if (ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PSS)) { 1546 DPRINTF("usb-ohci: port %d: SUSPEND\n", portnum); 1547 } 1548 1549 if (ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PRS)) { 1550 DPRINTF("usb-ohci: port %d: RESET\n", portnum); 1551 usb_device_reset(port->port.dev); 1552 port->ctrl &= ~OHCI_PORT_PRS; 1553 /* ??? Should this also set OHCI_PORT_PESC. */ 1554 port->ctrl |= OHCI_PORT_PES | OHCI_PORT_PRSC; 1555 } 1556 1557 /* Invert order here to ensure in ambiguous case, device is 1558 * powered up... 1559 */ 1560 if (val & OHCI_PORT_LSDA) 1561 ohci_port_power(ohci, portnum, 0); 1562 if (val & OHCI_PORT_PPS) 1563 ohci_port_power(ohci, portnum, 1); 1564 1565 if (old_state != port->ctrl) 1566 ohci_set_interrupt(ohci, OHCI_INTR_RHSC); 1567 } 1568 1569 static uint64_t ohci_mem_read(void *opaque, 1570 hwaddr addr, 1571 unsigned size) 1572 { 1573 OHCIState *ohci = opaque; 1574 uint32_t retval; 1575 1576 /* Only aligned reads are allowed on OHCI */ 1577 if (addr & 3) { 1578 fprintf(stderr, "usb-ohci: Mis-aligned read\n"); 1579 return 0xffffffff; 1580 } else if (addr >= 0x54 && addr < 0x54 + ohci->num_ports * 4) { 1581 /* HcRhPortStatus */ 1582 retval = ohci->rhport[(addr - 0x54) >> 2].ctrl | OHCI_PORT_PPS; 1583 } else { 1584 switch (addr >> 2) { 1585 case 0: /* HcRevision */ 1586 retval = 0x10; 1587 break; 1588 1589 case 1: /* HcControl */ 1590 retval = ohci->ctl; 1591 break; 1592 1593 case 2: /* HcCommandStatus */ 1594 retval = ohci->status; 1595 break; 1596 1597 case 3: /* HcInterruptStatus */ 1598 retval = ohci->intr_status; 1599 break; 1600 1601 case 4: /* HcInterruptEnable */ 1602 case 5: /* HcInterruptDisable */ 1603 retval = ohci->intr; 1604 break; 1605 1606 case 6: /* HcHCCA */ 1607 retval = ohci->hcca; 1608 break; 1609 1610 case 7: /* HcPeriodCurrentED */ 1611 retval = ohci->per_cur; 1612 break; 1613 1614 case 8: /* HcControlHeadED */ 1615 retval = ohci->ctrl_head; 1616 break; 1617 1618 case 9: /* HcControlCurrentED */ 1619 retval = ohci->ctrl_cur; 1620 break; 1621 1622 case 10: /* HcBulkHeadED */ 1623 retval = ohci->bulk_head; 1624 break; 1625 1626 case 11: /* HcBulkCurrentED */ 1627 retval = ohci->bulk_cur; 1628 break; 1629 1630 case 12: /* HcDoneHead */ 1631 retval = ohci->done; 1632 break; 1633 1634 case 13: /* HcFmInterretval */ 1635 retval = (ohci->fit << 31) | (ohci->fsmps << 16) | (ohci->fi); 1636 break; 1637 1638 case 14: /* HcFmRemaining */ 1639 retval = ohci_get_frame_remaining(ohci); 1640 break; 1641 1642 case 15: /* HcFmNumber */ 1643 retval = ohci->frame_number; 1644 break; 1645 1646 case 16: /* HcPeriodicStart */ 1647 retval = ohci->pstart; 1648 break; 1649 1650 case 17: /* HcLSThreshold */ 1651 retval = ohci->lst; 1652 break; 1653 1654 case 18: /* HcRhDescriptorA */ 1655 retval = ohci->rhdesc_a; 1656 break; 1657 1658 case 19: /* HcRhDescriptorB */ 1659 retval = ohci->rhdesc_b; 1660 break; 1661 1662 case 20: /* HcRhStatus */ 1663 retval = ohci->rhstatus; 1664 break; 1665 1666 /* PXA27x specific registers */ 1667 case 24: /* HcStatus */ 1668 retval = ohci->hstatus & ohci->hmask; 1669 break; 1670 1671 case 25: /* HcHReset */ 1672 retval = ohci->hreset; 1673 break; 1674 1675 case 26: /* HcHInterruptEnable */ 1676 retval = ohci->hmask; 1677 break; 1678 1679 case 27: /* HcHInterruptTest */ 1680 retval = ohci->htest; 1681 break; 1682 1683 default: 1684 fprintf(stderr, "ohci_read: Bad offset %x\n", (int)addr); 1685 retval = 0xffffffff; 1686 } 1687 } 1688 1689 return retval; 1690 } 1691 1692 static void ohci_mem_write(void *opaque, 1693 hwaddr addr, 1694 uint64_t val, 1695 unsigned size) 1696 { 1697 OHCIState *ohci = opaque; 1698 1699 /* Only aligned reads are allowed on OHCI */ 1700 if (addr & 3) { 1701 fprintf(stderr, "usb-ohci: Mis-aligned write\n"); 1702 return; 1703 } 1704 1705 if (addr >= 0x54 && addr < 0x54 + ohci->num_ports * 4) { 1706 /* HcRhPortStatus */ 1707 ohci_port_set_status(ohci, (addr - 0x54) >> 2, val); 1708 return; 1709 } 1710 1711 switch (addr >> 2) { 1712 case 1: /* HcControl */ 1713 ohci_set_ctl(ohci, val); 1714 break; 1715 1716 case 2: /* HcCommandStatus */ 1717 /* SOC is read-only */ 1718 val = (val & ~OHCI_STATUS_SOC); 1719 1720 /* Bits written as '0' remain unchanged in the register */ 1721 ohci->status |= val; 1722 1723 if (ohci->status & OHCI_STATUS_HCR) 1724 ohci_reset(ohci); 1725 break; 1726 1727 case 3: /* HcInterruptStatus */ 1728 ohci->intr_status &= ~val; 1729 ohci_intr_update(ohci); 1730 break; 1731 1732 case 4: /* HcInterruptEnable */ 1733 ohci->intr |= val; 1734 ohci_intr_update(ohci); 1735 break; 1736 1737 case 5: /* HcInterruptDisable */ 1738 ohci->intr &= ~val; 1739 ohci_intr_update(ohci); 1740 break; 1741 1742 case 6: /* HcHCCA */ 1743 ohci->hcca = val & OHCI_HCCA_MASK; 1744 break; 1745 1746 case 7: /* HcPeriodCurrentED */ 1747 /* Ignore writes to this read-only register, Linux does them */ 1748 break; 1749 1750 case 8: /* HcControlHeadED */ 1751 ohci->ctrl_head = val & OHCI_EDPTR_MASK; 1752 break; 1753 1754 case 9: /* HcControlCurrentED */ 1755 ohci->ctrl_cur = val & OHCI_EDPTR_MASK; 1756 break; 1757 1758 case 10: /* HcBulkHeadED */ 1759 ohci->bulk_head = val & OHCI_EDPTR_MASK; 1760 break; 1761 1762 case 11: /* HcBulkCurrentED */ 1763 ohci->bulk_cur = val & OHCI_EDPTR_MASK; 1764 break; 1765 1766 case 13: /* HcFmInterval */ 1767 ohci->fsmps = (val & OHCI_FMI_FSMPS) >> 16; 1768 ohci->fit = (val & OHCI_FMI_FIT) >> 31; 1769 ohci_set_frame_interval(ohci, val); 1770 break; 1771 1772 case 15: /* HcFmNumber */ 1773 break; 1774 1775 case 16: /* HcPeriodicStart */ 1776 ohci->pstart = val & 0xffff; 1777 break; 1778 1779 case 17: /* HcLSThreshold */ 1780 ohci->lst = val & 0xffff; 1781 break; 1782 1783 case 18: /* HcRhDescriptorA */ 1784 ohci->rhdesc_a &= ~OHCI_RHA_RW_MASK; 1785 ohci->rhdesc_a |= val & OHCI_RHA_RW_MASK; 1786 break; 1787 1788 case 19: /* HcRhDescriptorB */ 1789 break; 1790 1791 case 20: /* HcRhStatus */ 1792 ohci_set_hub_status(ohci, val); 1793 break; 1794 1795 /* PXA27x specific registers */ 1796 case 24: /* HcStatus */ 1797 ohci->hstatus &= ~(val & ohci->hmask); 1798 break; 1799 1800 case 25: /* HcHReset */ 1801 ohci->hreset = val & ~OHCI_HRESET_FSBIR; 1802 if (val & OHCI_HRESET_FSBIR) 1803 ohci_reset(ohci); 1804 break; 1805 1806 case 26: /* HcHInterruptEnable */ 1807 ohci->hmask = val; 1808 break; 1809 1810 case 27: /* HcHInterruptTest */ 1811 ohci->htest = val; 1812 break; 1813 1814 default: 1815 fprintf(stderr, "ohci_write: Bad offset %x\n", (int)addr); 1816 break; 1817 } 1818 } 1819 1820 static void ohci_async_cancel_device(OHCIState *ohci, USBDevice *dev) 1821 { 1822 if (ohci->async_td && 1823 usb_packet_is_inflight(&ohci->usb_packet) && 1824 ohci->usb_packet.ep->dev == dev) { 1825 usb_cancel_packet(&ohci->usb_packet); 1826 ohci->async_td = 0; 1827 } 1828 } 1829 1830 static const MemoryRegionOps ohci_mem_ops = { 1831 .read = ohci_mem_read, 1832 .write = ohci_mem_write, 1833 .endianness = DEVICE_LITTLE_ENDIAN, 1834 }; 1835 1836 static USBPortOps ohci_port_ops = { 1837 .attach = ohci_attach, 1838 .detach = ohci_detach, 1839 .child_detach = ohci_child_detach, 1840 .wakeup = ohci_wakeup, 1841 .complete = ohci_async_complete_packet, 1842 }; 1843 1844 static USBBusOps ohci_bus_ops = { 1845 }; 1846 1847 static int usb_ohci_init(OHCIState *ohci, DeviceState *dev, 1848 int num_ports, dma_addr_t localmem_base, 1849 char *masterbus, uint32_t firstport, 1850 AddressSpace *as) 1851 { 1852 int i; 1853 1854 ohci->as = as; 1855 1856 if (usb_frame_time == 0) { 1857 #ifdef OHCI_TIME_WARP 1858 usb_frame_time = get_ticks_per_sec(); 1859 usb_bit_time = muldiv64(1, get_ticks_per_sec(), USB_HZ/1000); 1860 #else 1861 usb_frame_time = muldiv64(1, get_ticks_per_sec(), 1000); 1862 if (get_ticks_per_sec() >= USB_HZ) { 1863 usb_bit_time = muldiv64(1, get_ticks_per_sec(), USB_HZ); 1864 } else { 1865 usb_bit_time = 1; 1866 } 1867 #endif 1868 DPRINTF("usb-ohci: usb_bit_time=%" PRId64 " usb_frame_time=%" PRId64 "\n", 1869 usb_frame_time, usb_bit_time); 1870 } 1871 1872 ohci->num_ports = num_ports; 1873 if (masterbus) { 1874 USBPort *ports[OHCI_MAX_PORTS]; 1875 for(i = 0; i < num_ports; i++) { 1876 ports[i] = &ohci->rhport[i].port; 1877 } 1878 if (usb_register_companion(masterbus, ports, num_ports, 1879 firstport, ohci, &ohci_port_ops, 1880 USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL) != 0) { 1881 return -1; 1882 } 1883 } else { 1884 usb_bus_new(&ohci->bus, &ohci_bus_ops, dev); 1885 for (i = 0; i < num_ports; i++) { 1886 usb_register_port(&ohci->bus, &ohci->rhport[i].port, 1887 ohci, i, &ohci_port_ops, 1888 USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL); 1889 } 1890 } 1891 1892 memory_region_init_io(&ohci->mem, OBJECT(dev), &ohci_mem_ops, 1893 ohci, "ohci", 256); 1894 ohci->localmem_base = localmem_base; 1895 1896 ohci->name = object_get_typename(OBJECT(dev)); 1897 usb_packet_init(&ohci->usb_packet); 1898 1899 ohci->async_td = 0; 1900 qemu_register_reset(ohci_reset, ohci); 1901 1902 return 0; 1903 } 1904 1905 #define TYPE_PCI_OHCI "pci-ohci" 1906 #define PCI_OHCI(obj) OBJECT_CHECK(OHCIPCIState, (obj), TYPE_PCI_OHCI) 1907 1908 typedef struct { 1909 /*< private >*/ 1910 PCIDevice parent_obj; 1911 /*< public >*/ 1912 1913 OHCIState state; 1914 char *masterbus; 1915 uint32_t num_ports; 1916 uint32_t firstport; 1917 } OHCIPCIState; 1918 1919 /** A typical O/EHCI will stop operating, set itself into error state 1920 * (which can be queried by MMIO) and will set PERR in its config 1921 * space to signal that it got an error 1922 */ 1923 static void ohci_die(OHCIState *ohci) 1924 { 1925 OHCIPCIState *dev = container_of(ohci, OHCIPCIState, state); 1926 1927 fprintf(stderr, "%s: DMA error\n", __func__); 1928 1929 ohci_set_interrupt(ohci, OHCI_INTR_UE); 1930 ohci_bus_stop(ohci); 1931 pci_set_word(dev->parent_obj.config + PCI_STATUS, 1932 PCI_STATUS_DETECTED_PARITY); 1933 } 1934 1935 static int usb_ohci_initfn_pci(PCIDevice *dev) 1936 { 1937 OHCIPCIState *ohci = PCI_OHCI(dev); 1938 1939 dev->config[PCI_CLASS_PROG] = 0x10; /* OHCI */ 1940 dev->config[PCI_INTERRUPT_PIN] = 0x01; /* interrupt pin A */ 1941 1942 if (usb_ohci_init(&ohci->state, DEVICE(dev), ohci->num_ports, 0, 1943 ohci->masterbus, ohci->firstport, 1944 pci_get_address_space(dev)) != 0) { 1945 return -1; 1946 } 1947 ohci->state.irq = dev->irq[0]; 1948 1949 pci_register_bar(dev, 0, 0, &ohci->state.mem); 1950 return 0; 1951 } 1952 1953 #define TYPE_SYSBUS_OHCI "sysbus-ohci" 1954 #define SYSBUS_OHCI(obj) OBJECT_CHECK(OHCISysBusState, (obj), TYPE_SYSBUS_OHCI) 1955 1956 typedef struct { 1957 /*< private >*/ 1958 SysBusDevice parent_obj; 1959 /*< public >*/ 1960 1961 OHCIState ohci; 1962 uint32_t num_ports; 1963 dma_addr_t dma_offset; 1964 } OHCISysBusState; 1965 1966 static void ohci_realize_pxa(DeviceState *dev, Error **errp) 1967 { 1968 OHCISysBusState *s = SYSBUS_OHCI(dev); 1969 SysBusDevice *sbd = SYS_BUS_DEVICE(dev); 1970 1971 /* Cannot fail as we pass NULL for masterbus */ 1972 usb_ohci_init(&s->ohci, dev, s->num_ports, s->dma_offset, NULL, 0, 1973 &address_space_memory); 1974 sysbus_init_irq(sbd, &s->ohci.irq); 1975 sysbus_init_mmio(sbd, &s->ohci.mem); 1976 } 1977 1978 static Property ohci_pci_properties[] = { 1979 DEFINE_PROP_STRING("masterbus", OHCIPCIState, masterbus), 1980 DEFINE_PROP_UINT32("num-ports", OHCIPCIState, num_ports, 3), 1981 DEFINE_PROP_UINT32("firstport", OHCIPCIState, firstport, 0), 1982 DEFINE_PROP_END_OF_LIST(), 1983 }; 1984 1985 static void ohci_pci_class_init(ObjectClass *klass, void *data) 1986 { 1987 DeviceClass *dc = DEVICE_CLASS(klass); 1988 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 1989 1990 k->init = usb_ohci_initfn_pci; 1991 k->vendor_id = PCI_VENDOR_ID_APPLE; 1992 k->device_id = PCI_DEVICE_ID_APPLE_IPID_USB; 1993 k->class_id = PCI_CLASS_SERIAL_USB; 1994 k->no_hotplug = 1; 1995 set_bit(DEVICE_CATEGORY_USB, dc->categories); 1996 dc->desc = "Apple USB Controller"; 1997 dc->props = ohci_pci_properties; 1998 } 1999 2000 static const TypeInfo ohci_pci_info = { 2001 .name = TYPE_PCI_OHCI, 2002 .parent = TYPE_PCI_DEVICE, 2003 .instance_size = sizeof(OHCIPCIState), 2004 .class_init = ohci_pci_class_init, 2005 }; 2006 2007 static Property ohci_sysbus_properties[] = { 2008 DEFINE_PROP_UINT32("num-ports", OHCISysBusState, num_ports, 3), 2009 DEFINE_PROP_DMAADDR("dma-offset", OHCISysBusState, dma_offset, 3), 2010 DEFINE_PROP_END_OF_LIST(), 2011 }; 2012 2013 static void ohci_sysbus_class_init(ObjectClass *klass, void *data) 2014 { 2015 DeviceClass *dc = DEVICE_CLASS(klass); 2016 2017 dc->realize = ohci_realize_pxa; 2018 set_bit(DEVICE_CATEGORY_USB, dc->categories); 2019 dc->desc = "OHCI USB Controller"; 2020 dc->props = ohci_sysbus_properties; 2021 } 2022 2023 static const TypeInfo ohci_sysbus_info = { 2024 .name = TYPE_SYSBUS_OHCI, 2025 .parent = TYPE_SYS_BUS_DEVICE, 2026 .instance_size = sizeof(OHCISysBusState), 2027 .class_init = ohci_sysbus_class_init, 2028 }; 2029 2030 static void ohci_register_types(void) 2031 { 2032 type_register_static(&ohci_pci_info); 2033 type_register_static(&ohci_sysbus_info); 2034 } 2035 2036 type_init(ohci_register_types) 2037