1 /* 2 * QEMU USB OHCI Emulation 3 * Copyright (c) 2004 Gianni Tedesco 4 * Copyright (c) 2006 CodeSourcery 5 * Copyright (c) 2006 Openedhand Ltd. 6 * 7 * This library is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU Lesser General Public 9 * License as published by the Free Software Foundation; either 10 * version 2 of the License, or (at your option) any later version. 11 * 12 * This library is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 15 * Lesser General Public License for more details. 16 * 17 * You should have received a copy of the GNU Lesser General Public 18 * License along with this library; if not, see <http://www.gnu.org/licenses/>. 19 * 20 * TODO: 21 * o Isochronous transfers 22 * o Allocate bandwidth in frames properly 23 * o Disable timers when nothing needs to be done, or remove timer usage 24 * all together. 25 * o Handle unrecoverable errors properly 26 * o BIOS work to boot from USB storage 27 */ 28 29 #include "hw/hw.h" 30 #include "qemu/timer.h" 31 #include "hw/usb.h" 32 #include "hw/pci/pci.h" 33 #include "hw/sysbus.h" 34 #include "hw/qdev-dma.h" 35 36 //#define DEBUG_OHCI 37 /* Dump packet contents. */ 38 //#define DEBUG_PACKET 39 //#define DEBUG_ISOCH 40 /* This causes frames to occur 1000x slower */ 41 //#define OHCI_TIME_WARP 1 42 43 #ifdef DEBUG_OHCI 44 #define DPRINTF printf 45 #else 46 #define DPRINTF(...) 47 #endif 48 49 /* Number of Downstream Ports on the root hub. */ 50 51 #define OHCI_MAX_PORTS 15 52 53 static int64_t usb_frame_time; 54 static int64_t usb_bit_time; 55 56 typedef struct OHCIPort { 57 USBPort port; 58 uint32_t ctrl; 59 } OHCIPort; 60 61 typedef struct { 62 USBBus bus; 63 qemu_irq irq; 64 MemoryRegion mem; 65 AddressSpace *as; 66 int num_ports; 67 const char *name; 68 69 QEMUTimer *eof_timer; 70 int64_t sof_time; 71 72 /* OHCI state */ 73 /* Control partition */ 74 uint32_t ctl, status; 75 uint32_t intr_status; 76 uint32_t intr; 77 78 /* memory pointer partition */ 79 uint32_t hcca; 80 uint32_t ctrl_head, ctrl_cur; 81 uint32_t bulk_head, bulk_cur; 82 uint32_t per_cur; 83 uint32_t done; 84 int done_count; 85 86 /* Frame counter partition */ 87 uint32_t fsmps:15; 88 uint32_t fit:1; 89 uint32_t fi:14; 90 uint32_t frt:1; 91 uint16_t frame_number; 92 uint16_t padding; 93 uint32_t pstart; 94 uint32_t lst; 95 96 /* Root Hub partition */ 97 uint32_t rhdesc_a, rhdesc_b; 98 uint32_t rhstatus; 99 OHCIPort rhport[OHCI_MAX_PORTS]; 100 101 /* PXA27x Non-OHCI events */ 102 uint32_t hstatus; 103 uint32_t hmask; 104 uint32_t hreset; 105 uint32_t htest; 106 107 /* SM501 local memory offset */ 108 dma_addr_t localmem_base; 109 110 /* Active packets. */ 111 uint32_t old_ctl; 112 USBPacket usb_packet; 113 uint8_t usb_buf[8192]; 114 uint32_t async_td; 115 int async_complete; 116 117 } OHCIState; 118 119 /* Host Controller Communications Area */ 120 struct ohci_hcca { 121 uint32_t intr[32]; 122 uint16_t frame, pad; 123 uint32_t done; 124 }; 125 #define HCCA_WRITEBACK_OFFSET offsetof(struct ohci_hcca, frame) 126 #define HCCA_WRITEBACK_SIZE 8 /* frame, pad, done */ 127 128 #define ED_WBACK_OFFSET offsetof(struct ohci_ed, head) 129 #define ED_WBACK_SIZE 4 130 131 static void ohci_bus_stop(OHCIState *ohci); 132 static void ohci_async_cancel_device(OHCIState *ohci, USBDevice *dev); 133 134 /* Bitfields for the first word of an Endpoint Desciptor. */ 135 #define OHCI_ED_FA_SHIFT 0 136 #define OHCI_ED_FA_MASK (0x7f<<OHCI_ED_FA_SHIFT) 137 #define OHCI_ED_EN_SHIFT 7 138 #define OHCI_ED_EN_MASK (0xf<<OHCI_ED_EN_SHIFT) 139 #define OHCI_ED_D_SHIFT 11 140 #define OHCI_ED_D_MASK (3<<OHCI_ED_D_SHIFT) 141 #define OHCI_ED_S (1<<13) 142 #define OHCI_ED_K (1<<14) 143 #define OHCI_ED_F (1<<15) 144 #define OHCI_ED_MPS_SHIFT 16 145 #define OHCI_ED_MPS_MASK (0x7ff<<OHCI_ED_MPS_SHIFT) 146 147 /* Flags in the head field of an Endpoint Desciptor. */ 148 #define OHCI_ED_H 1 149 #define OHCI_ED_C 2 150 151 /* Bitfields for the first word of a Transfer Desciptor. */ 152 #define OHCI_TD_R (1<<18) 153 #define OHCI_TD_DP_SHIFT 19 154 #define OHCI_TD_DP_MASK (3<<OHCI_TD_DP_SHIFT) 155 #define OHCI_TD_DI_SHIFT 21 156 #define OHCI_TD_DI_MASK (7<<OHCI_TD_DI_SHIFT) 157 #define OHCI_TD_T0 (1<<24) 158 #define OHCI_TD_T1 (1<<25) 159 #define OHCI_TD_EC_SHIFT 26 160 #define OHCI_TD_EC_MASK (3<<OHCI_TD_EC_SHIFT) 161 #define OHCI_TD_CC_SHIFT 28 162 #define OHCI_TD_CC_MASK (0xf<<OHCI_TD_CC_SHIFT) 163 164 /* Bitfields for the first word of an Isochronous Transfer Desciptor. */ 165 /* CC & DI - same as in the General Transfer Desciptor */ 166 #define OHCI_TD_SF_SHIFT 0 167 #define OHCI_TD_SF_MASK (0xffff<<OHCI_TD_SF_SHIFT) 168 #define OHCI_TD_FC_SHIFT 24 169 #define OHCI_TD_FC_MASK (7<<OHCI_TD_FC_SHIFT) 170 171 /* Isochronous Transfer Desciptor - Offset / PacketStatusWord */ 172 #define OHCI_TD_PSW_CC_SHIFT 12 173 #define OHCI_TD_PSW_CC_MASK (0xf<<OHCI_TD_PSW_CC_SHIFT) 174 #define OHCI_TD_PSW_SIZE_SHIFT 0 175 #define OHCI_TD_PSW_SIZE_MASK (0xfff<<OHCI_TD_PSW_SIZE_SHIFT) 176 177 #define OHCI_PAGE_MASK 0xfffff000 178 #define OHCI_OFFSET_MASK 0xfff 179 180 #define OHCI_DPTR_MASK 0xfffffff0 181 182 #define OHCI_BM(val, field) \ 183 (((val) & OHCI_##field##_MASK) >> OHCI_##field##_SHIFT) 184 185 #define OHCI_SET_BM(val, field, newval) do { \ 186 val &= ~OHCI_##field##_MASK; \ 187 val |= ((newval) << OHCI_##field##_SHIFT) & OHCI_##field##_MASK; \ 188 } while(0) 189 190 /* endpoint descriptor */ 191 struct ohci_ed { 192 uint32_t flags; 193 uint32_t tail; 194 uint32_t head; 195 uint32_t next; 196 }; 197 198 /* General transfer descriptor */ 199 struct ohci_td { 200 uint32_t flags; 201 uint32_t cbp; 202 uint32_t next; 203 uint32_t be; 204 }; 205 206 /* Isochronous transfer descriptor */ 207 struct ohci_iso_td { 208 uint32_t flags; 209 uint32_t bp; 210 uint32_t next; 211 uint32_t be; 212 uint16_t offset[8]; 213 }; 214 215 #define USB_HZ 12000000 216 217 /* OHCI Local stuff */ 218 #define OHCI_CTL_CBSR ((1<<0)|(1<<1)) 219 #define OHCI_CTL_PLE (1<<2) 220 #define OHCI_CTL_IE (1<<3) 221 #define OHCI_CTL_CLE (1<<4) 222 #define OHCI_CTL_BLE (1<<5) 223 #define OHCI_CTL_HCFS ((1<<6)|(1<<7)) 224 #define OHCI_USB_RESET 0x00 225 #define OHCI_USB_RESUME 0x40 226 #define OHCI_USB_OPERATIONAL 0x80 227 #define OHCI_USB_SUSPEND 0xc0 228 #define OHCI_CTL_IR (1<<8) 229 #define OHCI_CTL_RWC (1<<9) 230 #define OHCI_CTL_RWE (1<<10) 231 232 #define OHCI_STATUS_HCR (1<<0) 233 #define OHCI_STATUS_CLF (1<<1) 234 #define OHCI_STATUS_BLF (1<<2) 235 #define OHCI_STATUS_OCR (1<<3) 236 #define OHCI_STATUS_SOC ((1<<6)|(1<<7)) 237 238 #define OHCI_INTR_SO (1<<0) /* Scheduling overrun */ 239 #define OHCI_INTR_WD (1<<1) /* HcDoneHead writeback */ 240 #define OHCI_INTR_SF (1<<2) /* Start of frame */ 241 #define OHCI_INTR_RD (1<<3) /* Resume detect */ 242 #define OHCI_INTR_UE (1<<4) /* Unrecoverable error */ 243 #define OHCI_INTR_FNO (1<<5) /* Frame number overflow */ 244 #define OHCI_INTR_RHSC (1<<6) /* Root hub status change */ 245 #define OHCI_INTR_OC (1<<30) /* Ownership change */ 246 #define OHCI_INTR_MIE (1<<31) /* Master Interrupt Enable */ 247 248 #define OHCI_HCCA_SIZE 0x100 249 #define OHCI_HCCA_MASK 0xffffff00 250 251 #define OHCI_EDPTR_MASK 0xfffffff0 252 253 #define OHCI_FMI_FI 0x00003fff 254 #define OHCI_FMI_FSMPS 0xffff0000 255 #define OHCI_FMI_FIT 0x80000000 256 257 #define OHCI_FR_RT (1<<31) 258 259 #define OHCI_LS_THRESH 0x628 260 261 #define OHCI_RHA_RW_MASK 0x00000000 /* Mask of supported features. */ 262 #define OHCI_RHA_PSM (1<<8) 263 #define OHCI_RHA_NPS (1<<9) 264 #define OHCI_RHA_DT (1<<10) 265 #define OHCI_RHA_OCPM (1<<11) 266 #define OHCI_RHA_NOCP (1<<12) 267 #define OHCI_RHA_POTPGT_MASK 0xff000000 268 269 #define OHCI_RHS_LPS (1<<0) 270 #define OHCI_RHS_OCI (1<<1) 271 #define OHCI_RHS_DRWE (1<<15) 272 #define OHCI_RHS_LPSC (1<<16) 273 #define OHCI_RHS_OCIC (1<<17) 274 #define OHCI_RHS_CRWE (1<<31) 275 276 #define OHCI_PORT_CCS (1<<0) 277 #define OHCI_PORT_PES (1<<1) 278 #define OHCI_PORT_PSS (1<<2) 279 #define OHCI_PORT_POCI (1<<3) 280 #define OHCI_PORT_PRS (1<<4) 281 #define OHCI_PORT_PPS (1<<8) 282 #define OHCI_PORT_LSDA (1<<9) 283 #define OHCI_PORT_CSC (1<<16) 284 #define OHCI_PORT_PESC (1<<17) 285 #define OHCI_PORT_PSSC (1<<18) 286 #define OHCI_PORT_OCIC (1<<19) 287 #define OHCI_PORT_PRSC (1<<20) 288 #define OHCI_PORT_WTC (OHCI_PORT_CSC|OHCI_PORT_PESC|OHCI_PORT_PSSC \ 289 |OHCI_PORT_OCIC|OHCI_PORT_PRSC) 290 291 #define OHCI_TD_DIR_SETUP 0x0 292 #define OHCI_TD_DIR_OUT 0x1 293 #define OHCI_TD_DIR_IN 0x2 294 #define OHCI_TD_DIR_RESERVED 0x3 295 296 #define OHCI_CC_NOERROR 0x0 297 #define OHCI_CC_CRC 0x1 298 #define OHCI_CC_BITSTUFFING 0x2 299 #define OHCI_CC_DATATOGGLEMISMATCH 0x3 300 #define OHCI_CC_STALL 0x4 301 #define OHCI_CC_DEVICENOTRESPONDING 0x5 302 #define OHCI_CC_PIDCHECKFAILURE 0x6 303 #define OHCI_CC_UNDEXPETEDPID 0x7 304 #define OHCI_CC_DATAOVERRUN 0x8 305 #define OHCI_CC_DATAUNDERRUN 0x9 306 #define OHCI_CC_BUFFEROVERRUN 0xc 307 #define OHCI_CC_BUFFERUNDERRUN 0xd 308 309 #define OHCI_HRESET_FSBIR (1 << 0) 310 311 /* Update IRQ levels */ 312 static inline void ohci_intr_update(OHCIState *ohci) 313 { 314 int level = 0; 315 316 if ((ohci->intr & OHCI_INTR_MIE) && 317 (ohci->intr_status & ohci->intr)) 318 level = 1; 319 320 qemu_set_irq(ohci->irq, level); 321 } 322 323 /* Set an interrupt */ 324 static inline void ohci_set_interrupt(OHCIState *ohci, uint32_t intr) 325 { 326 ohci->intr_status |= intr; 327 ohci_intr_update(ohci); 328 } 329 330 /* Attach or detach a device on a root hub port. */ 331 static void ohci_attach(USBPort *port1) 332 { 333 OHCIState *s = port1->opaque; 334 OHCIPort *port = &s->rhport[port1->index]; 335 uint32_t old_state = port->ctrl; 336 337 /* set connect status */ 338 port->ctrl |= OHCI_PORT_CCS | OHCI_PORT_CSC; 339 340 /* update speed */ 341 if (port->port.dev->speed == USB_SPEED_LOW) { 342 port->ctrl |= OHCI_PORT_LSDA; 343 } else { 344 port->ctrl &= ~OHCI_PORT_LSDA; 345 } 346 347 /* notify of remote-wakeup */ 348 if ((s->ctl & OHCI_CTL_HCFS) == OHCI_USB_SUSPEND) { 349 ohci_set_interrupt(s, OHCI_INTR_RD); 350 } 351 352 DPRINTF("usb-ohci: Attached port %d\n", port1->index); 353 354 if (old_state != port->ctrl) { 355 ohci_set_interrupt(s, OHCI_INTR_RHSC); 356 } 357 } 358 359 static void ohci_detach(USBPort *port1) 360 { 361 OHCIState *s = port1->opaque; 362 OHCIPort *port = &s->rhport[port1->index]; 363 uint32_t old_state = port->ctrl; 364 365 ohci_async_cancel_device(s, port1->dev); 366 367 /* set connect status */ 368 if (port->ctrl & OHCI_PORT_CCS) { 369 port->ctrl &= ~OHCI_PORT_CCS; 370 port->ctrl |= OHCI_PORT_CSC; 371 } 372 /* disable port */ 373 if (port->ctrl & OHCI_PORT_PES) { 374 port->ctrl &= ~OHCI_PORT_PES; 375 port->ctrl |= OHCI_PORT_PESC; 376 } 377 DPRINTF("usb-ohci: Detached port %d\n", port1->index); 378 379 if (old_state != port->ctrl) { 380 ohci_set_interrupt(s, OHCI_INTR_RHSC); 381 } 382 } 383 384 static void ohci_wakeup(USBPort *port1) 385 { 386 OHCIState *s = port1->opaque; 387 OHCIPort *port = &s->rhport[port1->index]; 388 uint32_t intr = 0; 389 if (port->ctrl & OHCI_PORT_PSS) { 390 DPRINTF("usb-ohci: port %d: wakeup\n", port1->index); 391 port->ctrl |= OHCI_PORT_PSSC; 392 port->ctrl &= ~OHCI_PORT_PSS; 393 intr = OHCI_INTR_RHSC; 394 } 395 /* Note that the controller can be suspended even if this port is not */ 396 if ((s->ctl & OHCI_CTL_HCFS) == OHCI_USB_SUSPEND) { 397 DPRINTF("usb-ohci: remote-wakeup: SUSPEND->RESUME\n"); 398 /* This is the one state transition the controller can do by itself */ 399 s->ctl &= ~OHCI_CTL_HCFS; 400 s->ctl |= OHCI_USB_RESUME; 401 /* In suspend mode only ResumeDetected is possible, not RHSC: 402 * see the OHCI spec 5.1.2.3. 403 */ 404 intr = OHCI_INTR_RD; 405 } 406 ohci_set_interrupt(s, intr); 407 } 408 409 static void ohci_child_detach(USBPort *port1, USBDevice *child) 410 { 411 OHCIState *s = port1->opaque; 412 413 ohci_async_cancel_device(s, child); 414 } 415 416 static USBDevice *ohci_find_device(OHCIState *ohci, uint8_t addr) 417 { 418 USBDevice *dev; 419 int i; 420 421 for (i = 0; i < ohci->num_ports; i++) { 422 if ((ohci->rhport[i].ctrl & OHCI_PORT_PES) == 0) { 423 continue; 424 } 425 dev = usb_find_device(&ohci->rhport[i].port, addr); 426 if (dev != NULL) { 427 return dev; 428 } 429 } 430 return NULL; 431 } 432 433 static void ohci_stop_endpoints(OHCIState *ohci) 434 { 435 USBDevice *dev; 436 int i, j; 437 438 for (i = 0; i < ohci->num_ports; i++) { 439 dev = ohci->rhport[i].port.dev; 440 if (dev && dev->attached) { 441 usb_device_ep_stopped(dev, &dev->ep_ctl); 442 for (j = 0; j < USB_MAX_ENDPOINTS; j++) { 443 usb_device_ep_stopped(dev, &dev->ep_in[j]); 444 usb_device_ep_stopped(dev, &dev->ep_out[j]); 445 } 446 } 447 } 448 } 449 450 /* Reset the controller */ 451 static void ohci_reset(void *opaque) 452 { 453 OHCIState *ohci = opaque; 454 OHCIPort *port; 455 int i; 456 457 ohci_bus_stop(ohci); 458 ohci->ctl = 0; 459 ohci->old_ctl = 0; 460 ohci->status = 0; 461 ohci->intr_status = 0; 462 ohci->intr = OHCI_INTR_MIE; 463 464 ohci->hcca = 0; 465 ohci->ctrl_head = ohci->ctrl_cur = 0; 466 ohci->bulk_head = ohci->bulk_cur = 0; 467 ohci->per_cur = 0; 468 ohci->done = 0; 469 ohci->done_count = 7; 470 471 /* FSMPS is marked TBD in OCHI 1.0, what gives ffs? 472 * I took the value linux sets ... 473 */ 474 ohci->fsmps = 0x2778; 475 ohci->fi = 0x2edf; 476 ohci->fit = 0; 477 ohci->frt = 0; 478 ohci->frame_number = 0; 479 ohci->pstart = 0; 480 ohci->lst = OHCI_LS_THRESH; 481 482 ohci->rhdesc_a = OHCI_RHA_NPS | ohci->num_ports; 483 ohci->rhdesc_b = 0x0; /* Impl. specific */ 484 ohci->rhstatus = 0; 485 486 for (i = 0; i < ohci->num_ports; i++) 487 { 488 port = &ohci->rhport[i]; 489 port->ctrl = 0; 490 if (port->port.dev && port->port.dev->attached) { 491 usb_port_reset(&port->port); 492 } 493 } 494 if (ohci->async_td) { 495 usb_cancel_packet(&ohci->usb_packet); 496 ohci->async_td = 0; 497 } 498 ohci_stop_endpoints(ohci); 499 DPRINTF("usb-ohci: Reset %s\n", ohci->name); 500 } 501 502 /* Get an array of dwords from main memory */ 503 static inline int get_dwords(OHCIState *ohci, 504 dma_addr_t addr, uint32_t *buf, int num) 505 { 506 int i; 507 508 addr += ohci->localmem_base; 509 510 for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { 511 dma_memory_read(ohci->as, addr, buf, sizeof(*buf)); 512 *buf = le32_to_cpu(*buf); 513 } 514 515 return 1; 516 } 517 518 /* Put an array of dwords in to main memory */ 519 static inline int put_dwords(OHCIState *ohci, 520 dma_addr_t addr, uint32_t *buf, int num) 521 { 522 int i; 523 524 addr += ohci->localmem_base; 525 526 for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { 527 uint32_t tmp = cpu_to_le32(*buf); 528 dma_memory_write(ohci->as, addr, &tmp, sizeof(tmp)); 529 } 530 531 return 1; 532 } 533 534 /* Get an array of words from main memory */ 535 static inline int get_words(OHCIState *ohci, 536 dma_addr_t addr, uint16_t *buf, int num) 537 { 538 int i; 539 540 addr += ohci->localmem_base; 541 542 for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { 543 dma_memory_read(ohci->as, addr, buf, sizeof(*buf)); 544 *buf = le16_to_cpu(*buf); 545 } 546 547 return 1; 548 } 549 550 /* Put an array of words in to main memory */ 551 static inline int put_words(OHCIState *ohci, 552 dma_addr_t addr, uint16_t *buf, int num) 553 { 554 int i; 555 556 addr += ohci->localmem_base; 557 558 for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { 559 uint16_t tmp = cpu_to_le16(*buf); 560 dma_memory_write(ohci->as, addr, &tmp, sizeof(tmp)); 561 } 562 563 return 1; 564 } 565 566 static inline int ohci_read_ed(OHCIState *ohci, 567 dma_addr_t addr, struct ohci_ed *ed) 568 { 569 return get_dwords(ohci, addr, (uint32_t *)ed, sizeof(*ed) >> 2); 570 } 571 572 static inline int ohci_read_td(OHCIState *ohci, 573 dma_addr_t addr, struct ohci_td *td) 574 { 575 return get_dwords(ohci, addr, (uint32_t *)td, sizeof(*td) >> 2); 576 } 577 578 static inline int ohci_read_iso_td(OHCIState *ohci, 579 dma_addr_t addr, struct ohci_iso_td *td) 580 { 581 return (get_dwords(ohci, addr, (uint32_t *)td, 4) && 582 get_words(ohci, addr + 16, td->offset, 8)); 583 } 584 585 static inline int ohci_read_hcca(OHCIState *ohci, 586 dma_addr_t addr, struct ohci_hcca *hcca) 587 { 588 dma_memory_read(ohci->as, addr + ohci->localmem_base, hcca, sizeof(*hcca)); 589 return 1; 590 } 591 592 static inline int ohci_put_ed(OHCIState *ohci, 593 dma_addr_t addr, struct ohci_ed *ed) 594 { 595 /* ed->tail is under control of the HCD. 596 * Since just ed->head is changed by HC, just write back this 597 */ 598 599 return put_dwords(ohci, addr + ED_WBACK_OFFSET, 600 (uint32_t *)((char *)ed + ED_WBACK_OFFSET), 601 ED_WBACK_SIZE >> 2); 602 } 603 604 static inline int ohci_put_td(OHCIState *ohci, 605 dma_addr_t addr, struct ohci_td *td) 606 { 607 return put_dwords(ohci, addr, (uint32_t *)td, sizeof(*td) >> 2); 608 } 609 610 static inline int ohci_put_iso_td(OHCIState *ohci, 611 dma_addr_t addr, struct ohci_iso_td *td) 612 { 613 return (put_dwords(ohci, addr, (uint32_t *)td, 4) && 614 put_words(ohci, addr + 16, td->offset, 8)); 615 } 616 617 static inline int ohci_put_hcca(OHCIState *ohci, 618 dma_addr_t addr, struct ohci_hcca *hcca) 619 { 620 dma_memory_write(ohci->as, 621 addr + ohci->localmem_base + HCCA_WRITEBACK_OFFSET, 622 (char *)hcca + HCCA_WRITEBACK_OFFSET, 623 HCCA_WRITEBACK_SIZE); 624 return 1; 625 } 626 627 /* Read/Write the contents of a TD from/to main memory. */ 628 static void ohci_copy_td(OHCIState *ohci, struct ohci_td *td, 629 uint8_t *buf, int len, DMADirection dir) 630 { 631 dma_addr_t ptr, n; 632 633 ptr = td->cbp; 634 n = 0x1000 - (ptr & 0xfff); 635 if (n > len) 636 n = len; 637 dma_memory_rw(ohci->as, ptr + ohci->localmem_base, buf, n, dir); 638 if (n == len) 639 return; 640 ptr = td->be & ~0xfffu; 641 buf += n; 642 dma_memory_rw(ohci->as, ptr + ohci->localmem_base, buf, len - n, dir); 643 } 644 645 /* Read/Write the contents of an ISO TD from/to main memory. */ 646 static void ohci_copy_iso_td(OHCIState *ohci, 647 uint32_t start_addr, uint32_t end_addr, 648 uint8_t *buf, int len, DMADirection dir) 649 { 650 dma_addr_t ptr, n; 651 652 ptr = start_addr; 653 n = 0x1000 - (ptr & 0xfff); 654 if (n > len) 655 n = len; 656 dma_memory_rw(ohci->as, ptr + ohci->localmem_base, buf, n, dir); 657 if (n == len) 658 return; 659 ptr = end_addr & ~0xfffu; 660 buf += n; 661 dma_memory_rw(ohci->as, ptr + ohci->localmem_base, buf, len - n, dir); 662 } 663 664 static void ohci_process_lists(OHCIState *ohci, int completion); 665 666 static void ohci_async_complete_packet(USBPort *port, USBPacket *packet) 667 { 668 OHCIState *ohci = container_of(packet, OHCIState, usb_packet); 669 #ifdef DEBUG_PACKET 670 DPRINTF("Async packet complete\n"); 671 #endif 672 ohci->async_complete = 1; 673 ohci_process_lists(ohci, 1); 674 } 675 676 #define USUB(a, b) ((int16_t)((uint16_t)(a) - (uint16_t)(b))) 677 678 static int ohci_service_iso_td(OHCIState *ohci, struct ohci_ed *ed, 679 int completion) 680 { 681 int dir; 682 size_t len = 0; 683 #ifdef DEBUG_ISOCH 684 const char *str = NULL; 685 #endif 686 int pid; 687 int ret; 688 int i; 689 USBDevice *dev; 690 USBEndpoint *ep; 691 struct ohci_iso_td iso_td; 692 uint32_t addr; 693 uint16_t starting_frame; 694 int16_t relative_frame_number; 695 int frame_count; 696 uint32_t start_offset, next_offset, end_offset = 0; 697 uint32_t start_addr, end_addr; 698 699 addr = ed->head & OHCI_DPTR_MASK; 700 701 if (!ohci_read_iso_td(ohci, addr, &iso_td)) { 702 printf("usb-ohci: ISO_TD read error at %x\n", addr); 703 return 0; 704 } 705 706 starting_frame = OHCI_BM(iso_td.flags, TD_SF); 707 frame_count = OHCI_BM(iso_td.flags, TD_FC); 708 relative_frame_number = USUB(ohci->frame_number, starting_frame); 709 710 #ifdef DEBUG_ISOCH 711 printf("--- ISO_TD ED head 0x%.8x tailp 0x%.8x\n" 712 "0x%.8x 0x%.8x 0x%.8x 0x%.8x\n" 713 "0x%.8x 0x%.8x 0x%.8x 0x%.8x\n" 714 "0x%.8x 0x%.8x 0x%.8x 0x%.8x\n" 715 "frame_number 0x%.8x starting_frame 0x%.8x\n" 716 "frame_count 0x%.8x relative %d\n" 717 "di 0x%.8x cc 0x%.8x\n", 718 ed->head & OHCI_DPTR_MASK, ed->tail & OHCI_DPTR_MASK, 719 iso_td.flags, iso_td.bp, iso_td.next, iso_td.be, 720 iso_td.offset[0], iso_td.offset[1], iso_td.offset[2], iso_td.offset[3], 721 iso_td.offset[4], iso_td.offset[5], iso_td.offset[6], iso_td.offset[7], 722 ohci->frame_number, starting_frame, 723 frame_count, relative_frame_number, 724 OHCI_BM(iso_td.flags, TD_DI), OHCI_BM(iso_td.flags, TD_CC)); 725 #endif 726 727 if (relative_frame_number < 0) { 728 DPRINTF("usb-ohci: ISO_TD R=%d < 0\n", relative_frame_number); 729 return 1; 730 } else if (relative_frame_number > frame_count) { 731 /* ISO TD expired - retire the TD to the Done Queue and continue with 732 the next ISO TD of the same ED */ 733 DPRINTF("usb-ohci: ISO_TD R=%d > FC=%d\n", relative_frame_number, 734 frame_count); 735 OHCI_SET_BM(iso_td.flags, TD_CC, OHCI_CC_DATAOVERRUN); 736 ed->head &= ~OHCI_DPTR_MASK; 737 ed->head |= (iso_td.next & OHCI_DPTR_MASK); 738 iso_td.next = ohci->done; 739 ohci->done = addr; 740 i = OHCI_BM(iso_td.flags, TD_DI); 741 if (i < ohci->done_count) 742 ohci->done_count = i; 743 ohci_put_iso_td(ohci, addr, &iso_td); 744 return 0; 745 } 746 747 dir = OHCI_BM(ed->flags, ED_D); 748 switch (dir) { 749 case OHCI_TD_DIR_IN: 750 #ifdef DEBUG_ISOCH 751 str = "in"; 752 #endif 753 pid = USB_TOKEN_IN; 754 break; 755 case OHCI_TD_DIR_OUT: 756 #ifdef DEBUG_ISOCH 757 str = "out"; 758 #endif 759 pid = USB_TOKEN_OUT; 760 break; 761 case OHCI_TD_DIR_SETUP: 762 #ifdef DEBUG_ISOCH 763 str = "setup"; 764 #endif 765 pid = USB_TOKEN_SETUP; 766 break; 767 default: 768 printf("usb-ohci: Bad direction %d\n", dir); 769 return 1; 770 } 771 772 if (!iso_td.bp || !iso_td.be) { 773 printf("usb-ohci: ISO_TD bp 0x%.8x be 0x%.8x\n", iso_td.bp, iso_td.be); 774 return 1; 775 } 776 777 start_offset = iso_td.offset[relative_frame_number]; 778 next_offset = iso_td.offset[relative_frame_number + 1]; 779 780 if (!(OHCI_BM(start_offset, TD_PSW_CC) & 0xe) || 781 ((relative_frame_number < frame_count) && 782 !(OHCI_BM(next_offset, TD_PSW_CC) & 0xe))) { 783 printf("usb-ohci: ISO_TD cc != not accessed 0x%.8x 0x%.8x\n", 784 start_offset, next_offset); 785 return 1; 786 } 787 788 if ((relative_frame_number < frame_count) && (start_offset > next_offset)) { 789 printf("usb-ohci: ISO_TD start_offset=0x%.8x > next_offset=0x%.8x\n", 790 start_offset, next_offset); 791 return 1; 792 } 793 794 if ((start_offset & 0x1000) == 0) { 795 start_addr = (iso_td.bp & OHCI_PAGE_MASK) | 796 (start_offset & OHCI_OFFSET_MASK); 797 } else { 798 start_addr = (iso_td.be & OHCI_PAGE_MASK) | 799 (start_offset & OHCI_OFFSET_MASK); 800 } 801 802 if (relative_frame_number < frame_count) { 803 end_offset = next_offset - 1; 804 if ((end_offset & 0x1000) == 0) { 805 end_addr = (iso_td.bp & OHCI_PAGE_MASK) | 806 (end_offset & OHCI_OFFSET_MASK); 807 } else { 808 end_addr = (iso_td.be & OHCI_PAGE_MASK) | 809 (end_offset & OHCI_OFFSET_MASK); 810 } 811 } else { 812 /* Last packet in the ISO TD */ 813 end_addr = iso_td.be; 814 } 815 816 if ((start_addr & OHCI_PAGE_MASK) != (end_addr & OHCI_PAGE_MASK)) { 817 len = (end_addr & OHCI_OFFSET_MASK) + 0x1001 818 - (start_addr & OHCI_OFFSET_MASK); 819 } else { 820 len = end_addr - start_addr + 1; 821 } 822 823 if (len && dir != OHCI_TD_DIR_IN) { 824 ohci_copy_iso_td(ohci, start_addr, end_addr, ohci->usb_buf, len, 825 DMA_DIRECTION_TO_DEVICE); 826 } 827 828 if (!completion) { 829 bool int_req = relative_frame_number == frame_count && 830 OHCI_BM(iso_td.flags, TD_DI) == 0; 831 dev = ohci_find_device(ohci, OHCI_BM(ed->flags, ED_FA)); 832 ep = usb_ep_get(dev, pid, OHCI_BM(ed->flags, ED_EN)); 833 usb_packet_setup(&ohci->usb_packet, pid, ep, 0, addr, false, int_req); 834 usb_packet_addbuf(&ohci->usb_packet, ohci->usb_buf, len); 835 usb_handle_packet(dev, &ohci->usb_packet); 836 if (ohci->usb_packet.status == USB_RET_ASYNC) { 837 usb_device_flush_ep_queue(dev, ep); 838 return 1; 839 } 840 } 841 if (ohci->usb_packet.status == USB_RET_SUCCESS) { 842 ret = ohci->usb_packet.actual_length; 843 } else { 844 ret = ohci->usb_packet.status; 845 } 846 847 #ifdef DEBUG_ISOCH 848 printf("so 0x%.8x eo 0x%.8x\nsa 0x%.8x ea 0x%.8x\ndir %s len %zu ret %d\n", 849 start_offset, end_offset, start_addr, end_addr, str, len, ret); 850 #endif 851 852 /* Writeback */ 853 if (dir == OHCI_TD_DIR_IN && ret >= 0 && ret <= len) { 854 /* IN transfer succeeded */ 855 ohci_copy_iso_td(ohci, start_addr, end_addr, ohci->usb_buf, ret, 856 DMA_DIRECTION_FROM_DEVICE); 857 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, 858 OHCI_CC_NOERROR); 859 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, ret); 860 } else if (dir == OHCI_TD_DIR_OUT && ret == len) { 861 /* OUT transfer succeeded */ 862 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, 863 OHCI_CC_NOERROR); 864 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, 0); 865 } else { 866 if (ret > (ssize_t) len) { 867 printf("usb-ohci: DataOverrun %d > %zu\n", ret, len); 868 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, 869 OHCI_CC_DATAOVERRUN); 870 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, 871 len); 872 } else if (ret >= 0) { 873 printf("usb-ohci: DataUnderrun %d\n", ret); 874 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, 875 OHCI_CC_DATAUNDERRUN); 876 } else { 877 switch (ret) { 878 case USB_RET_IOERROR: 879 case USB_RET_NODEV: 880 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, 881 OHCI_CC_DEVICENOTRESPONDING); 882 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, 883 0); 884 break; 885 case USB_RET_NAK: 886 case USB_RET_STALL: 887 printf("usb-ohci: got NAK/STALL %d\n", ret); 888 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, 889 OHCI_CC_STALL); 890 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, 891 0); 892 break; 893 default: 894 printf("usb-ohci: Bad device response %d\n", ret); 895 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, 896 OHCI_CC_UNDEXPETEDPID); 897 break; 898 } 899 } 900 } 901 902 if (relative_frame_number == frame_count) { 903 /* Last data packet of ISO TD - retire the TD to the Done Queue */ 904 OHCI_SET_BM(iso_td.flags, TD_CC, OHCI_CC_NOERROR); 905 ed->head &= ~OHCI_DPTR_MASK; 906 ed->head |= (iso_td.next & OHCI_DPTR_MASK); 907 iso_td.next = ohci->done; 908 ohci->done = addr; 909 i = OHCI_BM(iso_td.flags, TD_DI); 910 if (i < ohci->done_count) 911 ohci->done_count = i; 912 } 913 ohci_put_iso_td(ohci, addr, &iso_td); 914 return 1; 915 } 916 917 /* Service a transport descriptor. 918 Returns nonzero to terminate processing of this endpoint. */ 919 920 static int ohci_service_td(OHCIState *ohci, struct ohci_ed *ed) 921 { 922 int dir; 923 size_t len = 0, pktlen = 0; 924 #ifdef DEBUG_PACKET 925 const char *str = NULL; 926 #endif 927 int pid; 928 int ret; 929 int i; 930 USBDevice *dev; 931 USBEndpoint *ep; 932 struct ohci_td td; 933 uint32_t addr; 934 int flag_r; 935 int completion; 936 937 addr = ed->head & OHCI_DPTR_MASK; 938 /* See if this TD has already been submitted to the device. */ 939 completion = (addr == ohci->async_td); 940 if (completion && !ohci->async_complete) { 941 #ifdef DEBUG_PACKET 942 DPRINTF("Skipping async TD\n"); 943 #endif 944 return 1; 945 } 946 if (!ohci_read_td(ohci, addr, &td)) { 947 fprintf(stderr, "usb-ohci: TD read error at %x\n", addr); 948 return 0; 949 } 950 951 dir = OHCI_BM(ed->flags, ED_D); 952 switch (dir) { 953 case OHCI_TD_DIR_OUT: 954 case OHCI_TD_DIR_IN: 955 /* Same value. */ 956 break; 957 default: 958 dir = OHCI_BM(td.flags, TD_DP); 959 break; 960 } 961 962 switch (dir) { 963 case OHCI_TD_DIR_IN: 964 #ifdef DEBUG_PACKET 965 str = "in"; 966 #endif 967 pid = USB_TOKEN_IN; 968 break; 969 case OHCI_TD_DIR_OUT: 970 #ifdef DEBUG_PACKET 971 str = "out"; 972 #endif 973 pid = USB_TOKEN_OUT; 974 break; 975 case OHCI_TD_DIR_SETUP: 976 #ifdef DEBUG_PACKET 977 str = "setup"; 978 #endif 979 pid = USB_TOKEN_SETUP; 980 break; 981 default: 982 fprintf(stderr, "usb-ohci: Bad direction\n"); 983 return 1; 984 } 985 if (td.cbp && td.be) { 986 if ((td.cbp & 0xfffff000) != (td.be & 0xfffff000)) { 987 len = (td.be & 0xfff) + 0x1001 - (td.cbp & 0xfff); 988 } else { 989 len = (td.be - td.cbp) + 1; 990 } 991 992 pktlen = len; 993 if (len && dir != OHCI_TD_DIR_IN) { 994 /* The endpoint may not allow us to transfer it all now */ 995 pktlen = (ed->flags & OHCI_ED_MPS_MASK) >> OHCI_ED_MPS_SHIFT; 996 if (pktlen > len) { 997 pktlen = len; 998 } 999 if (!completion) { 1000 ohci_copy_td(ohci, &td, ohci->usb_buf, pktlen, 1001 DMA_DIRECTION_TO_DEVICE); 1002 } 1003 } 1004 } 1005 1006 flag_r = (td.flags & OHCI_TD_R) != 0; 1007 #ifdef DEBUG_PACKET 1008 DPRINTF(" TD @ 0x%.8x %" PRId64 " of %" PRId64 1009 " bytes %s r=%d cbp=0x%.8x be=0x%.8x\n", 1010 addr, (int64_t)pktlen, (int64_t)len, str, flag_r, td.cbp, td.be); 1011 1012 if (pktlen > 0 && dir != OHCI_TD_DIR_IN) { 1013 DPRINTF(" data:"); 1014 for (i = 0; i < pktlen; i++) { 1015 printf(" %.2x", ohci->usb_buf[i]); 1016 } 1017 DPRINTF("\n"); 1018 } 1019 #endif 1020 if (completion) { 1021 ohci->async_td = 0; 1022 ohci->async_complete = 0; 1023 } else { 1024 if (ohci->async_td) { 1025 /* ??? The hardware should allow one active packet per 1026 endpoint. We only allow one active packet per controller. 1027 This should be sufficient as long as devices respond in a 1028 timely manner. 1029 */ 1030 #ifdef DEBUG_PACKET 1031 DPRINTF("Too many pending packets\n"); 1032 #endif 1033 return 1; 1034 } 1035 dev = ohci_find_device(ohci, OHCI_BM(ed->flags, ED_FA)); 1036 ep = usb_ep_get(dev, pid, OHCI_BM(ed->flags, ED_EN)); 1037 usb_packet_setup(&ohci->usb_packet, pid, ep, 0, addr, !flag_r, 1038 OHCI_BM(td.flags, TD_DI) == 0); 1039 usb_packet_addbuf(&ohci->usb_packet, ohci->usb_buf, pktlen); 1040 usb_handle_packet(dev, &ohci->usb_packet); 1041 #ifdef DEBUG_PACKET 1042 DPRINTF("status=%d\n", ohci->usb_packet.status); 1043 #endif 1044 if (ohci->usb_packet.status == USB_RET_ASYNC) { 1045 usb_device_flush_ep_queue(dev, ep); 1046 ohci->async_td = addr; 1047 return 1; 1048 } 1049 } 1050 if (ohci->usb_packet.status == USB_RET_SUCCESS) { 1051 ret = ohci->usb_packet.actual_length; 1052 } else { 1053 ret = ohci->usb_packet.status; 1054 } 1055 1056 if (ret >= 0) { 1057 if (dir == OHCI_TD_DIR_IN) { 1058 ohci_copy_td(ohci, &td, ohci->usb_buf, ret, 1059 DMA_DIRECTION_FROM_DEVICE); 1060 #ifdef DEBUG_PACKET 1061 DPRINTF(" data:"); 1062 for (i = 0; i < ret; i++) 1063 printf(" %.2x", ohci->usb_buf[i]); 1064 DPRINTF("\n"); 1065 #endif 1066 } else { 1067 ret = pktlen; 1068 } 1069 } 1070 1071 /* Writeback */ 1072 if (ret == pktlen || (dir == OHCI_TD_DIR_IN && ret >= 0 && flag_r)) { 1073 /* Transmission succeeded. */ 1074 if (ret == len) { 1075 td.cbp = 0; 1076 } else { 1077 if ((td.cbp & 0xfff) + ret > 0xfff) { 1078 td.cbp = (td.be & ~0xfff) + ((td.cbp + ret) & 0xfff); 1079 } else { 1080 td.cbp += ret; 1081 } 1082 } 1083 td.flags |= OHCI_TD_T1; 1084 td.flags ^= OHCI_TD_T0; 1085 OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_NOERROR); 1086 OHCI_SET_BM(td.flags, TD_EC, 0); 1087 1088 if ((dir != OHCI_TD_DIR_IN) && (ret != len)) { 1089 /* Partial packet transfer: TD not ready to retire yet */ 1090 goto exit_no_retire; 1091 } 1092 1093 /* Setting ED_C is part of the TD retirement process */ 1094 ed->head &= ~OHCI_ED_C; 1095 if (td.flags & OHCI_TD_T0) 1096 ed->head |= OHCI_ED_C; 1097 } else { 1098 if (ret >= 0) { 1099 DPRINTF("usb-ohci: Underrun\n"); 1100 OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DATAUNDERRUN); 1101 } else { 1102 switch (ret) { 1103 case USB_RET_IOERROR: 1104 case USB_RET_NODEV: 1105 OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DEVICENOTRESPONDING); 1106 case USB_RET_NAK: 1107 DPRINTF("usb-ohci: got NAK\n"); 1108 return 1; 1109 case USB_RET_STALL: 1110 DPRINTF("usb-ohci: got STALL\n"); 1111 OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_STALL); 1112 break; 1113 case USB_RET_BABBLE: 1114 DPRINTF("usb-ohci: got BABBLE\n"); 1115 OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DATAOVERRUN); 1116 break; 1117 default: 1118 fprintf(stderr, "usb-ohci: Bad device response %d\n", ret); 1119 OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_UNDEXPETEDPID); 1120 OHCI_SET_BM(td.flags, TD_EC, 3); 1121 break; 1122 } 1123 } 1124 ed->head |= OHCI_ED_H; 1125 } 1126 1127 /* Retire this TD */ 1128 ed->head &= ~OHCI_DPTR_MASK; 1129 ed->head |= td.next & OHCI_DPTR_MASK; 1130 td.next = ohci->done; 1131 ohci->done = addr; 1132 i = OHCI_BM(td.flags, TD_DI); 1133 if (i < ohci->done_count) 1134 ohci->done_count = i; 1135 exit_no_retire: 1136 ohci_put_td(ohci, addr, &td); 1137 return OHCI_BM(td.flags, TD_CC) != OHCI_CC_NOERROR; 1138 } 1139 1140 /* Service an endpoint list. Returns nonzero if active TD were found. */ 1141 static int ohci_service_ed_list(OHCIState *ohci, uint32_t head, int completion) 1142 { 1143 struct ohci_ed ed; 1144 uint32_t next_ed; 1145 uint32_t cur; 1146 int active; 1147 1148 active = 0; 1149 1150 if (head == 0) 1151 return 0; 1152 1153 for (cur = head; cur; cur = next_ed) { 1154 if (!ohci_read_ed(ohci, cur, &ed)) { 1155 fprintf(stderr, "usb-ohci: ED read error at %x\n", cur); 1156 return 0; 1157 } 1158 1159 next_ed = ed.next & OHCI_DPTR_MASK; 1160 1161 if ((ed.head & OHCI_ED_H) || (ed.flags & OHCI_ED_K)) { 1162 uint32_t addr; 1163 /* Cancel pending packets for ED that have been paused. */ 1164 addr = ed.head & OHCI_DPTR_MASK; 1165 if (ohci->async_td && addr == ohci->async_td) { 1166 usb_cancel_packet(&ohci->usb_packet); 1167 ohci->async_td = 0; 1168 usb_device_ep_stopped(ohci->usb_packet.ep->dev, 1169 ohci->usb_packet.ep); 1170 } 1171 continue; 1172 } 1173 1174 while ((ed.head & OHCI_DPTR_MASK) != ed.tail) { 1175 #ifdef DEBUG_PACKET 1176 DPRINTF("ED @ 0x%.8x fa=%u en=%u d=%u s=%u k=%u f=%u mps=%u " 1177 "h=%u c=%u\n head=0x%.8x tailp=0x%.8x next=0x%.8x\n", cur, 1178 OHCI_BM(ed.flags, ED_FA), OHCI_BM(ed.flags, ED_EN), 1179 OHCI_BM(ed.flags, ED_D), (ed.flags & OHCI_ED_S)!= 0, 1180 (ed.flags & OHCI_ED_K) != 0, (ed.flags & OHCI_ED_F) != 0, 1181 OHCI_BM(ed.flags, ED_MPS), (ed.head & OHCI_ED_H) != 0, 1182 (ed.head & OHCI_ED_C) != 0, ed.head & OHCI_DPTR_MASK, 1183 ed.tail & OHCI_DPTR_MASK, ed.next & OHCI_DPTR_MASK); 1184 #endif 1185 active = 1; 1186 1187 if ((ed.flags & OHCI_ED_F) == 0) { 1188 if (ohci_service_td(ohci, &ed)) 1189 break; 1190 } else { 1191 /* Handle isochronous endpoints */ 1192 if (ohci_service_iso_td(ohci, &ed, completion)) 1193 break; 1194 } 1195 } 1196 1197 ohci_put_ed(ohci, cur, &ed); 1198 } 1199 1200 return active; 1201 } 1202 1203 /* Generate a SOF event, and set a timer for EOF */ 1204 static void ohci_sof(OHCIState *ohci) 1205 { 1206 ohci->sof_time = qemu_get_clock_ns(vm_clock); 1207 qemu_mod_timer(ohci->eof_timer, ohci->sof_time + usb_frame_time); 1208 ohci_set_interrupt(ohci, OHCI_INTR_SF); 1209 } 1210 1211 /* Process Control and Bulk lists. */ 1212 static void ohci_process_lists(OHCIState *ohci, int completion) 1213 { 1214 if ((ohci->ctl & OHCI_CTL_CLE) && (ohci->status & OHCI_STATUS_CLF)) { 1215 if (ohci->ctrl_cur && ohci->ctrl_cur != ohci->ctrl_head) { 1216 DPRINTF("usb-ohci: head %x, cur %x\n", 1217 ohci->ctrl_head, ohci->ctrl_cur); 1218 } 1219 if (!ohci_service_ed_list(ohci, ohci->ctrl_head, completion)) { 1220 ohci->ctrl_cur = 0; 1221 ohci->status &= ~OHCI_STATUS_CLF; 1222 } 1223 } 1224 1225 if ((ohci->ctl & OHCI_CTL_BLE) && (ohci->status & OHCI_STATUS_BLF)) { 1226 if (!ohci_service_ed_list(ohci, ohci->bulk_head, completion)) { 1227 ohci->bulk_cur = 0; 1228 ohci->status &= ~OHCI_STATUS_BLF; 1229 } 1230 } 1231 } 1232 1233 /* Do frame processing on frame boundary */ 1234 static void ohci_frame_boundary(void *opaque) 1235 { 1236 OHCIState *ohci = opaque; 1237 struct ohci_hcca hcca; 1238 1239 ohci_read_hcca(ohci, ohci->hcca, &hcca); 1240 1241 /* Process all the lists at the end of the frame */ 1242 if (ohci->ctl & OHCI_CTL_PLE) { 1243 int n; 1244 1245 n = ohci->frame_number & 0x1f; 1246 ohci_service_ed_list(ohci, le32_to_cpu(hcca.intr[n]), 0); 1247 } 1248 1249 /* Cancel all pending packets if either of the lists has been disabled. */ 1250 if (ohci->old_ctl & (~ohci->ctl) & (OHCI_CTL_BLE | OHCI_CTL_CLE)) { 1251 if (ohci->async_td) { 1252 usb_cancel_packet(&ohci->usb_packet); 1253 ohci->async_td = 0; 1254 } 1255 ohci_stop_endpoints(ohci); 1256 } 1257 ohci->old_ctl = ohci->ctl; 1258 ohci_process_lists(ohci, 0); 1259 1260 /* Frame boundary, so do EOF stuf here */ 1261 ohci->frt = ohci->fit; 1262 1263 /* Increment frame number and take care of endianness. */ 1264 ohci->frame_number = (ohci->frame_number + 1) & 0xffff; 1265 hcca.frame = cpu_to_le16(ohci->frame_number); 1266 1267 if (ohci->done_count == 0 && !(ohci->intr_status & OHCI_INTR_WD)) { 1268 if (!ohci->done) 1269 abort(); 1270 if (ohci->intr & ohci->intr_status) 1271 ohci->done |= 1; 1272 hcca.done = cpu_to_le32(ohci->done); 1273 ohci->done = 0; 1274 ohci->done_count = 7; 1275 ohci_set_interrupt(ohci, OHCI_INTR_WD); 1276 } 1277 1278 if (ohci->done_count != 7 && ohci->done_count != 0) 1279 ohci->done_count--; 1280 1281 /* Do SOF stuff here */ 1282 ohci_sof(ohci); 1283 1284 /* Writeback HCCA */ 1285 ohci_put_hcca(ohci, ohci->hcca, &hcca); 1286 } 1287 1288 /* Start sending SOF tokens across the USB bus, lists are processed in 1289 * next frame 1290 */ 1291 static int ohci_bus_start(OHCIState *ohci) 1292 { 1293 ohci->eof_timer = qemu_new_timer_ns(vm_clock, 1294 ohci_frame_boundary, 1295 ohci); 1296 1297 if (ohci->eof_timer == NULL) { 1298 fprintf(stderr, "usb-ohci: %s: qemu_new_timer_ns failed\n", ohci->name); 1299 /* TODO: Signal unrecoverable error */ 1300 return 0; 1301 } 1302 1303 DPRINTF("usb-ohci: %s: USB Operational\n", ohci->name); 1304 1305 ohci_sof(ohci); 1306 1307 return 1; 1308 } 1309 1310 /* Stop sending SOF tokens on the bus */ 1311 static void ohci_bus_stop(OHCIState *ohci) 1312 { 1313 if (ohci->eof_timer) 1314 qemu_del_timer(ohci->eof_timer); 1315 ohci->eof_timer = NULL; 1316 } 1317 1318 /* Sets a flag in a port status register but only set it if the port is 1319 * connected, if not set ConnectStatusChange flag. If flag is enabled 1320 * return 1. 1321 */ 1322 static int ohci_port_set_if_connected(OHCIState *ohci, int i, uint32_t val) 1323 { 1324 int ret = 1; 1325 1326 /* writing a 0 has no effect */ 1327 if (val == 0) 1328 return 0; 1329 1330 /* If CurrentConnectStatus is cleared we set 1331 * ConnectStatusChange 1332 */ 1333 if (!(ohci->rhport[i].ctrl & OHCI_PORT_CCS)) { 1334 ohci->rhport[i].ctrl |= OHCI_PORT_CSC; 1335 if (ohci->rhstatus & OHCI_RHS_DRWE) { 1336 /* TODO: CSC is a wakeup event */ 1337 } 1338 return 0; 1339 } 1340 1341 if (ohci->rhport[i].ctrl & val) 1342 ret = 0; 1343 1344 /* set the bit */ 1345 ohci->rhport[i].ctrl |= val; 1346 1347 return ret; 1348 } 1349 1350 /* Set the frame interval - frame interval toggle is manipulated by the hcd only */ 1351 static void ohci_set_frame_interval(OHCIState *ohci, uint16_t val) 1352 { 1353 val &= OHCI_FMI_FI; 1354 1355 if (val != ohci->fi) { 1356 DPRINTF("usb-ohci: %s: FrameInterval = 0x%x (%u)\n", 1357 ohci->name, ohci->fi, ohci->fi); 1358 } 1359 1360 ohci->fi = val; 1361 } 1362 1363 static void ohci_port_power(OHCIState *ohci, int i, int p) 1364 { 1365 if (p) { 1366 ohci->rhport[i].ctrl |= OHCI_PORT_PPS; 1367 } else { 1368 ohci->rhport[i].ctrl &= ~(OHCI_PORT_PPS| 1369 OHCI_PORT_CCS| 1370 OHCI_PORT_PSS| 1371 OHCI_PORT_PRS); 1372 } 1373 } 1374 1375 /* Set HcControlRegister */ 1376 static void ohci_set_ctl(OHCIState *ohci, uint32_t val) 1377 { 1378 uint32_t old_state; 1379 uint32_t new_state; 1380 1381 old_state = ohci->ctl & OHCI_CTL_HCFS; 1382 ohci->ctl = val; 1383 new_state = ohci->ctl & OHCI_CTL_HCFS; 1384 1385 /* no state change */ 1386 if (old_state == new_state) 1387 return; 1388 1389 switch (new_state) { 1390 case OHCI_USB_OPERATIONAL: 1391 ohci_bus_start(ohci); 1392 break; 1393 case OHCI_USB_SUSPEND: 1394 ohci_bus_stop(ohci); 1395 DPRINTF("usb-ohci: %s: USB Suspended\n", ohci->name); 1396 break; 1397 case OHCI_USB_RESUME: 1398 DPRINTF("usb-ohci: %s: USB Resume\n", ohci->name); 1399 break; 1400 case OHCI_USB_RESET: 1401 ohci_reset(ohci); 1402 DPRINTF("usb-ohci: %s: USB Reset\n", ohci->name); 1403 break; 1404 } 1405 } 1406 1407 static uint32_t ohci_get_frame_remaining(OHCIState *ohci) 1408 { 1409 uint16_t fr; 1410 int64_t tks; 1411 1412 if ((ohci->ctl & OHCI_CTL_HCFS) != OHCI_USB_OPERATIONAL) 1413 return (ohci->frt << 31); 1414 1415 /* Being in USB operational state guarnatees sof_time was 1416 * set already. 1417 */ 1418 tks = qemu_get_clock_ns(vm_clock) - ohci->sof_time; 1419 1420 /* avoid muldiv if possible */ 1421 if (tks >= usb_frame_time) 1422 return (ohci->frt << 31); 1423 1424 tks = muldiv64(1, tks, usb_bit_time); 1425 fr = (uint16_t)(ohci->fi - tks); 1426 1427 return (ohci->frt << 31) | fr; 1428 } 1429 1430 1431 /* Set root hub status */ 1432 static void ohci_set_hub_status(OHCIState *ohci, uint32_t val) 1433 { 1434 uint32_t old_state; 1435 1436 old_state = ohci->rhstatus; 1437 1438 /* write 1 to clear OCIC */ 1439 if (val & OHCI_RHS_OCIC) 1440 ohci->rhstatus &= ~OHCI_RHS_OCIC; 1441 1442 if (val & OHCI_RHS_LPS) { 1443 int i; 1444 1445 for (i = 0; i < ohci->num_ports; i++) 1446 ohci_port_power(ohci, i, 0); 1447 DPRINTF("usb-ohci: powered down all ports\n"); 1448 } 1449 1450 if (val & OHCI_RHS_LPSC) { 1451 int i; 1452 1453 for (i = 0; i < ohci->num_ports; i++) 1454 ohci_port_power(ohci, i, 1); 1455 DPRINTF("usb-ohci: powered up all ports\n"); 1456 } 1457 1458 if (val & OHCI_RHS_DRWE) 1459 ohci->rhstatus |= OHCI_RHS_DRWE; 1460 1461 if (val & OHCI_RHS_CRWE) 1462 ohci->rhstatus &= ~OHCI_RHS_DRWE; 1463 1464 if (old_state != ohci->rhstatus) 1465 ohci_set_interrupt(ohci, OHCI_INTR_RHSC); 1466 } 1467 1468 /* Set root hub port status */ 1469 static void ohci_port_set_status(OHCIState *ohci, int portnum, uint32_t val) 1470 { 1471 uint32_t old_state; 1472 OHCIPort *port; 1473 1474 port = &ohci->rhport[portnum]; 1475 old_state = port->ctrl; 1476 1477 /* Write to clear CSC, PESC, PSSC, OCIC, PRSC */ 1478 if (val & OHCI_PORT_WTC) 1479 port->ctrl &= ~(val & OHCI_PORT_WTC); 1480 1481 if (val & OHCI_PORT_CCS) 1482 port->ctrl &= ~OHCI_PORT_PES; 1483 1484 ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PES); 1485 1486 if (ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PSS)) { 1487 DPRINTF("usb-ohci: port %d: SUSPEND\n", portnum); 1488 } 1489 1490 if (ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PRS)) { 1491 DPRINTF("usb-ohci: port %d: RESET\n", portnum); 1492 usb_device_reset(port->port.dev); 1493 port->ctrl &= ~OHCI_PORT_PRS; 1494 /* ??? Should this also set OHCI_PORT_PESC. */ 1495 port->ctrl |= OHCI_PORT_PES | OHCI_PORT_PRSC; 1496 } 1497 1498 /* Invert order here to ensure in ambiguous case, device is 1499 * powered up... 1500 */ 1501 if (val & OHCI_PORT_LSDA) 1502 ohci_port_power(ohci, portnum, 0); 1503 if (val & OHCI_PORT_PPS) 1504 ohci_port_power(ohci, portnum, 1); 1505 1506 if (old_state != port->ctrl) 1507 ohci_set_interrupt(ohci, OHCI_INTR_RHSC); 1508 } 1509 1510 static uint64_t ohci_mem_read(void *opaque, 1511 hwaddr addr, 1512 unsigned size) 1513 { 1514 OHCIState *ohci = opaque; 1515 uint32_t retval; 1516 1517 /* Only aligned reads are allowed on OHCI */ 1518 if (addr & 3) { 1519 fprintf(stderr, "usb-ohci: Mis-aligned read\n"); 1520 return 0xffffffff; 1521 } else if (addr >= 0x54 && addr < 0x54 + ohci->num_ports * 4) { 1522 /* HcRhPortStatus */ 1523 retval = ohci->rhport[(addr - 0x54) >> 2].ctrl | OHCI_PORT_PPS; 1524 } else { 1525 switch (addr >> 2) { 1526 case 0: /* HcRevision */ 1527 retval = 0x10; 1528 break; 1529 1530 case 1: /* HcControl */ 1531 retval = ohci->ctl; 1532 break; 1533 1534 case 2: /* HcCommandStatus */ 1535 retval = ohci->status; 1536 break; 1537 1538 case 3: /* HcInterruptStatus */ 1539 retval = ohci->intr_status; 1540 break; 1541 1542 case 4: /* HcInterruptEnable */ 1543 case 5: /* HcInterruptDisable */ 1544 retval = ohci->intr; 1545 break; 1546 1547 case 6: /* HcHCCA */ 1548 retval = ohci->hcca; 1549 break; 1550 1551 case 7: /* HcPeriodCurrentED */ 1552 retval = ohci->per_cur; 1553 break; 1554 1555 case 8: /* HcControlHeadED */ 1556 retval = ohci->ctrl_head; 1557 break; 1558 1559 case 9: /* HcControlCurrentED */ 1560 retval = ohci->ctrl_cur; 1561 break; 1562 1563 case 10: /* HcBulkHeadED */ 1564 retval = ohci->bulk_head; 1565 break; 1566 1567 case 11: /* HcBulkCurrentED */ 1568 retval = ohci->bulk_cur; 1569 break; 1570 1571 case 12: /* HcDoneHead */ 1572 retval = ohci->done; 1573 break; 1574 1575 case 13: /* HcFmInterretval */ 1576 retval = (ohci->fit << 31) | (ohci->fsmps << 16) | (ohci->fi); 1577 break; 1578 1579 case 14: /* HcFmRemaining */ 1580 retval = ohci_get_frame_remaining(ohci); 1581 break; 1582 1583 case 15: /* HcFmNumber */ 1584 retval = ohci->frame_number; 1585 break; 1586 1587 case 16: /* HcPeriodicStart */ 1588 retval = ohci->pstart; 1589 break; 1590 1591 case 17: /* HcLSThreshold */ 1592 retval = ohci->lst; 1593 break; 1594 1595 case 18: /* HcRhDescriptorA */ 1596 retval = ohci->rhdesc_a; 1597 break; 1598 1599 case 19: /* HcRhDescriptorB */ 1600 retval = ohci->rhdesc_b; 1601 break; 1602 1603 case 20: /* HcRhStatus */ 1604 retval = ohci->rhstatus; 1605 break; 1606 1607 /* PXA27x specific registers */ 1608 case 24: /* HcStatus */ 1609 retval = ohci->hstatus & ohci->hmask; 1610 break; 1611 1612 case 25: /* HcHReset */ 1613 retval = ohci->hreset; 1614 break; 1615 1616 case 26: /* HcHInterruptEnable */ 1617 retval = ohci->hmask; 1618 break; 1619 1620 case 27: /* HcHInterruptTest */ 1621 retval = ohci->htest; 1622 break; 1623 1624 default: 1625 fprintf(stderr, "ohci_read: Bad offset %x\n", (int)addr); 1626 retval = 0xffffffff; 1627 } 1628 } 1629 1630 return retval; 1631 } 1632 1633 static void ohci_mem_write(void *opaque, 1634 hwaddr addr, 1635 uint64_t val, 1636 unsigned size) 1637 { 1638 OHCIState *ohci = opaque; 1639 1640 /* Only aligned reads are allowed on OHCI */ 1641 if (addr & 3) { 1642 fprintf(stderr, "usb-ohci: Mis-aligned write\n"); 1643 return; 1644 } 1645 1646 if (addr >= 0x54 && addr < 0x54 + ohci->num_ports * 4) { 1647 /* HcRhPortStatus */ 1648 ohci_port_set_status(ohci, (addr - 0x54) >> 2, val); 1649 return; 1650 } 1651 1652 switch (addr >> 2) { 1653 case 1: /* HcControl */ 1654 ohci_set_ctl(ohci, val); 1655 break; 1656 1657 case 2: /* HcCommandStatus */ 1658 /* SOC is read-only */ 1659 val = (val & ~OHCI_STATUS_SOC); 1660 1661 /* Bits written as '0' remain unchanged in the register */ 1662 ohci->status |= val; 1663 1664 if (ohci->status & OHCI_STATUS_HCR) 1665 ohci_reset(ohci); 1666 break; 1667 1668 case 3: /* HcInterruptStatus */ 1669 ohci->intr_status &= ~val; 1670 ohci_intr_update(ohci); 1671 break; 1672 1673 case 4: /* HcInterruptEnable */ 1674 ohci->intr |= val; 1675 ohci_intr_update(ohci); 1676 break; 1677 1678 case 5: /* HcInterruptDisable */ 1679 ohci->intr &= ~val; 1680 ohci_intr_update(ohci); 1681 break; 1682 1683 case 6: /* HcHCCA */ 1684 ohci->hcca = val & OHCI_HCCA_MASK; 1685 break; 1686 1687 case 7: /* HcPeriodCurrentED */ 1688 /* Ignore writes to this read-only register, Linux does them */ 1689 break; 1690 1691 case 8: /* HcControlHeadED */ 1692 ohci->ctrl_head = val & OHCI_EDPTR_MASK; 1693 break; 1694 1695 case 9: /* HcControlCurrentED */ 1696 ohci->ctrl_cur = val & OHCI_EDPTR_MASK; 1697 break; 1698 1699 case 10: /* HcBulkHeadED */ 1700 ohci->bulk_head = val & OHCI_EDPTR_MASK; 1701 break; 1702 1703 case 11: /* HcBulkCurrentED */ 1704 ohci->bulk_cur = val & OHCI_EDPTR_MASK; 1705 break; 1706 1707 case 13: /* HcFmInterval */ 1708 ohci->fsmps = (val & OHCI_FMI_FSMPS) >> 16; 1709 ohci->fit = (val & OHCI_FMI_FIT) >> 31; 1710 ohci_set_frame_interval(ohci, val); 1711 break; 1712 1713 case 15: /* HcFmNumber */ 1714 break; 1715 1716 case 16: /* HcPeriodicStart */ 1717 ohci->pstart = val & 0xffff; 1718 break; 1719 1720 case 17: /* HcLSThreshold */ 1721 ohci->lst = val & 0xffff; 1722 break; 1723 1724 case 18: /* HcRhDescriptorA */ 1725 ohci->rhdesc_a &= ~OHCI_RHA_RW_MASK; 1726 ohci->rhdesc_a |= val & OHCI_RHA_RW_MASK; 1727 break; 1728 1729 case 19: /* HcRhDescriptorB */ 1730 break; 1731 1732 case 20: /* HcRhStatus */ 1733 ohci_set_hub_status(ohci, val); 1734 break; 1735 1736 /* PXA27x specific registers */ 1737 case 24: /* HcStatus */ 1738 ohci->hstatus &= ~(val & ohci->hmask); 1739 break; 1740 1741 case 25: /* HcHReset */ 1742 ohci->hreset = val & ~OHCI_HRESET_FSBIR; 1743 if (val & OHCI_HRESET_FSBIR) 1744 ohci_reset(ohci); 1745 break; 1746 1747 case 26: /* HcHInterruptEnable */ 1748 ohci->hmask = val; 1749 break; 1750 1751 case 27: /* HcHInterruptTest */ 1752 ohci->htest = val; 1753 break; 1754 1755 default: 1756 fprintf(stderr, "ohci_write: Bad offset %x\n", (int)addr); 1757 break; 1758 } 1759 } 1760 1761 static void ohci_async_cancel_device(OHCIState *ohci, USBDevice *dev) 1762 { 1763 if (ohci->async_td && 1764 usb_packet_is_inflight(&ohci->usb_packet) && 1765 ohci->usb_packet.ep->dev == dev) { 1766 usb_cancel_packet(&ohci->usb_packet); 1767 ohci->async_td = 0; 1768 } 1769 } 1770 1771 static const MemoryRegionOps ohci_mem_ops = { 1772 .read = ohci_mem_read, 1773 .write = ohci_mem_write, 1774 .endianness = DEVICE_LITTLE_ENDIAN, 1775 }; 1776 1777 static USBPortOps ohci_port_ops = { 1778 .attach = ohci_attach, 1779 .detach = ohci_detach, 1780 .child_detach = ohci_child_detach, 1781 .wakeup = ohci_wakeup, 1782 .complete = ohci_async_complete_packet, 1783 }; 1784 1785 static USBBusOps ohci_bus_ops = { 1786 }; 1787 1788 static int usb_ohci_init(OHCIState *ohci, DeviceState *dev, 1789 int num_ports, dma_addr_t localmem_base, 1790 char *masterbus, uint32_t firstport, 1791 AddressSpace *as) 1792 { 1793 int i; 1794 1795 ohci->as = as; 1796 1797 if (usb_frame_time == 0) { 1798 #ifdef OHCI_TIME_WARP 1799 usb_frame_time = get_ticks_per_sec(); 1800 usb_bit_time = muldiv64(1, get_ticks_per_sec(), USB_HZ/1000); 1801 #else 1802 usb_frame_time = muldiv64(1, get_ticks_per_sec(), 1000); 1803 if (get_ticks_per_sec() >= USB_HZ) { 1804 usb_bit_time = muldiv64(1, get_ticks_per_sec(), USB_HZ); 1805 } else { 1806 usb_bit_time = 1; 1807 } 1808 #endif 1809 DPRINTF("usb-ohci: usb_bit_time=%" PRId64 " usb_frame_time=%" PRId64 "\n", 1810 usb_frame_time, usb_bit_time); 1811 } 1812 1813 ohci->num_ports = num_ports; 1814 if (masterbus) { 1815 USBPort *ports[OHCI_MAX_PORTS]; 1816 for(i = 0; i < num_ports; i++) { 1817 ports[i] = &ohci->rhport[i].port; 1818 } 1819 if (usb_register_companion(masterbus, ports, num_ports, 1820 firstport, ohci, &ohci_port_ops, 1821 USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL) != 0) { 1822 return -1; 1823 } 1824 } else { 1825 usb_bus_new(&ohci->bus, &ohci_bus_ops, dev); 1826 for (i = 0; i < num_ports; i++) { 1827 usb_register_port(&ohci->bus, &ohci->rhport[i].port, 1828 ohci, i, &ohci_port_ops, 1829 USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL); 1830 } 1831 } 1832 1833 memory_region_init_io(&ohci->mem, OBJECT(dev), &ohci_mem_ops, 1834 ohci, "ohci", 256); 1835 ohci->localmem_base = localmem_base; 1836 1837 ohci->name = object_get_typename(OBJECT(dev)); 1838 usb_packet_init(&ohci->usb_packet); 1839 1840 ohci->async_td = 0; 1841 qemu_register_reset(ohci_reset, ohci); 1842 1843 return 0; 1844 } 1845 1846 typedef struct { 1847 PCIDevice pci_dev; 1848 OHCIState state; 1849 char *masterbus; 1850 uint32_t num_ports; 1851 uint32_t firstport; 1852 } OHCIPCIState; 1853 1854 static int usb_ohci_initfn_pci(struct PCIDevice *dev) 1855 { 1856 OHCIPCIState *ohci = DO_UPCAST(OHCIPCIState, pci_dev, dev); 1857 1858 ohci->pci_dev.config[PCI_CLASS_PROG] = 0x10; /* OHCI */ 1859 ohci->pci_dev.config[PCI_INTERRUPT_PIN] = 0x01; /* interrupt pin A */ 1860 1861 if (usb_ohci_init(&ohci->state, &dev->qdev, ohci->num_ports, 0, 1862 ohci->masterbus, ohci->firstport, 1863 pci_get_address_space(dev)) != 0) { 1864 return -1; 1865 } 1866 ohci->state.irq = ohci->pci_dev.irq[0]; 1867 1868 /* TODO: avoid cast below by using dev */ 1869 pci_register_bar(&ohci->pci_dev, 0, 0, &ohci->state.mem); 1870 return 0; 1871 } 1872 1873 typedef struct { 1874 SysBusDevice busdev; 1875 OHCIState ohci; 1876 uint32_t num_ports; 1877 dma_addr_t dma_offset; 1878 } OHCISysBusState; 1879 1880 static int ohci_init_pxa(SysBusDevice *dev) 1881 { 1882 OHCISysBusState *s = FROM_SYSBUS(OHCISysBusState, dev); 1883 1884 /* Cannot fail as we pass NULL for masterbus */ 1885 usb_ohci_init(&s->ohci, &dev->qdev, s->num_ports, s->dma_offset, NULL, 0, 1886 &address_space_memory); 1887 sysbus_init_irq(dev, &s->ohci.irq); 1888 sysbus_init_mmio(dev, &s->ohci.mem); 1889 1890 return 0; 1891 } 1892 1893 static Property ohci_pci_properties[] = { 1894 DEFINE_PROP_STRING("masterbus", OHCIPCIState, masterbus), 1895 DEFINE_PROP_UINT32("num-ports", OHCIPCIState, num_ports, 3), 1896 DEFINE_PROP_UINT32("firstport", OHCIPCIState, firstport, 0), 1897 DEFINE_PROP_END_OF_LIST(), 1898 }; 1899 1900 static void ohci_pci_class_init(ObjectClass *klass, void *data) 1901 { 1902 DeviceClass *dc = DEVICE_CLASS(klass); 1903 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 1904 1905 k->init = usb_ohci_initfn_pci; 1906 k->vendor_id = PCI_VENDOR_ID_APPLE; 1907 k->device_id = PCI_DEVICE_ID_APPLE_IPID_USB; 1908 k->class_id = PCI_CLASS_SERIAL_USB; 1909 k->no_hotplug = 1; 1910 dc->desc = "Apple USB Controller"; 1911 dc->props = ohci_pci_properties; 1912 } 1913 1914 static const TypeInfo ohci_pci_info = { 1915 .name = "pci-ohci", 1916 .parent = TYPE_PCI_DEVICE, 1917 .instance_size = sizeof(OHCIPCIState), 1918 .class_init = ohci_pci_class_init, 1919 }; 1920 1921 static Property ohci_sysbus_properties[] = { 1922 DEFINE_PROP_UINT32("num-ports", OHCISysBusState, num_ports, 3), 1923 DEFINE_PROP_DMAADDR("dma-offset", OHCISysBusState, dma_offset, 3), 1924 DEFINE_PROP_END_OF_LIST(), 1925 }; 1926 1927 static void ohci_sysbus_class_init(ObjectClass *klass, void *data) 1928 { 1929 DeviceClass *dc = DEVICE_CLASS(klass); 1930 SysBusDeviceClass *sbc = SYS_BUS_DEVICE_CLASS(klass); 1931 1932 sbc->init = ohci_init_pxa; 1933 dc->desc = "OHCI USB Controller"; 1934 dc->props = ohci_sysbus_properties; 1935 } 1936 1937 static const TypeInfo ohci_sysbus_info = { 1938 .name = "sysbus-ohci", 1939 .parent = TYPE_SYS_BUS_DEVICE, 1940 .instance_size = sizeof(OHCISysBusState), 1941 .class_init = ohci_sysbus_class_init, 1942 }; 1943 1944 static void ohci_register_types(void) 1945 { 1946 type_register_static(&ohci_pci_info); 1947 type_register_static(&ohci_sysbus_info); 1948 } 1949 1950 type_init(ohci_register_types) 1951