1 /* 2 * QEMU USB OHCI Emulation 3 * Copyright (c) 2004 Gianni Tedesco 4 * Copyright (c) 2006 CodeSourcery 5 * Copyright (c) 2006 Openedhand Ltd. 6 * 7 * This library is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU Lesser General Public 9 * License as published by the Free Software Foundation; either 10 * version 2 of the License, or (at your option) any later version. 11 * 12 * This library is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 15 * Lesser General Public License for more details. 16 * 17 * You should have received a copy of the GNU Lesser General Public 18 * License along with this library; if not, see <http://www.gnu.org/licenses/>. 19 * 20 * TODO: 21 * o Isochronous transfers 22 * o Allocate bandwidth in frames properly 23 * o Disable timers when nothing needs to be done, or remove timer usage 24 * all together. 25 * o BIOS work to boot from USB storage 26 */ 27 28 #include "hw/hw.h" 29 #include "qemu/timer.h" 30 #include "hw/usb.h" 31 #include "hw/pci/pci.h" 32 #include "hw/sysbus.h" 33 #include "hw/qdev-dma.h" 34 35 //#define DEBUG_OHCI 36 /* Dump packet contents. */ 37 //#define DEBUG_PACKET 38 //#define DEBUG_ISOCH 39 /* This causes frames to occur 1000x slower */ 40 //#define OHCI_TIME_WARP 1 41 42 #ifdef DEBUG_OHCI 43 #define DPRINTF printf 44 #else 45 #define DPRINTF(...) 46 #endif 47 48 /* Number of Downstream Ports on the root hub. */ 49 50 #define OHCI_MAX_PORTS 15 51 52 static int64_t usb_frame_time; 53 static int64_t usb_bit_time; 54 55 typedef struct OHCIPort { 56 USBPort port; 57 uint32_t ctrl; 58 } OHCIPort; 59 60 typedef struct { 61 USBBus bus; 62 qemu_irq irq; 63 MemoryRegion mem; 64 AddressSpace *as; 65 int num_ports; 66 const char *name; 67 68 QEMUTimer *eof_timer; 69 int64_t sof_time; 70 71 /* OHCI state */ 72 /* Control partition */ 73 uint32_t ctl, status; 74 uint32_t intr_status; 75 uint32_t intr; 76 77 /* memory pointer partition */ 78 uint32_t hcca; 79 uint32_t ctrl_head, ctrl_cur; 80 uint32_t bulk_head, bulk_cur; 81 uint32_t per_cur; 82 uint32_t done; 83 int done_count; 84 85 /* Frame counter partition */ 86 uint32_t fsmps:15; 87 uint32_t fit:1; 88 uint32_t fi:14; 89 uint32_t frt:1; 90 uint16_t frame_number; 91 uint16_t padding; 92 uint32_t pstart; 93 uint32_t lst; 94 95 /* Root Hub partition */ 96 uint32_t rhdesc_a, rhdesc_b; 97 uint32_t rhstatus; 98 OHCIPort rhport[OHCI_MAX_PORTS]; 99 100 /* PXA27x Non-OHCI events */ 101 uint32_t hstatus; 102 uint32_t hmask; 103 uint32_t hreset; 104 uint32_t htest; 105 106 /* SM501 local memory offset */ 107 dma_addr_t localmem_base; 108 109 /* Active packets. */ 110 uint32_t old_ctl; 111 USBPacket usb_packet; 112 uint8_t usb_buf[8192]; 113 uint32_t async_td; 114 int async_complete; 115 116 } OHCIState; 117 118 /* Host Controller Communications Area */ 119 struct ohci_hcca { 120 uint32_t intr[32]; 121 uint16_t frame, pad; 122 uint32_t done; 123 }; 124 #define HCCA_WRITEBACK_OFFSET offsetof(struct ohci_hcca, frame) 125 #define HCCA_WRITEBACK_SIZE 8 /* frame, pad, done */ 126 127 #define ED_WBACK_OFFSET offsetof(struct ohci_ed, head) 128 #define ED_WBACK_SIZE 4 129 130 static void ohci_bus_stop(OHCIState *ohci); 131 static void ohci_async_cancel_device(OHCIState *ohci, USBDevice *dev); 132 133 /* Bitfields for the first word of an Endpoint Desciptor. */ 134 #define OHCI_ED_FA_SHIFT 0 135 #define OHCI_ED_FA_MASK (0x7f<<OHCI_ED_FA_SHIFT) 136 #define OHCI_ED_EN_SHIFT 7 137 #define OHCI_ED_EN_MASK (0xf<<OHCI_ED_EN_SHIFT) 138 #define OHCI_ED_D_SHIFT 11 139 #define OHCI_ED_D_MASK (3<<OHCI_ED_D_SHIFT) 140 #define OHCI_ED_S (1<<13) 141 #define OHCI_ED_K (1<<14) 142 #define OHCI_ED_F (1<<15) 143 #define OHCI_ED_MPS_SHIFT 16 144 #define OHCI_ED_MPS_MASK (0x7ff<<OHCI_ED_MPS_SHIFT) 145 146 /* Flags in the head field of an Endpoint Desciptor. */ 147 #define OHCI_ED_H 1 148 #define OHCI_ED_C 2 149 150 /* Bitfields for the first word of a Transfer Desciptor. */ 151 #define OHCI_TD_R (1<<18) 152 #define OHCI_TD_DP_SHIFT 19 153 #define OHCI_TD_DP_MASK (3<<OHCI_TD_DP_SHIFT) 154 #define OHCI_TD_DI_SHIFT 21 155 #define OHCI_TD_DI_MASK (7<<OHCI_TD_DI_SHIFT) 156 #define OHCI_TD_T0 (1<<24) 157 #define OHCI_TD_T1 (1<<25) 158 #define OHCI_TD_EC_SHIFT 26 159 #define OHCI_TD_EC_MASK (3<<OHCI_TD_EC_SHIFT) 160 #define OHCI_TD_CC_SHIFT 28 161 #define OHCI_TD_CC_MASK (0xf<<OHCI_TD_CC_SHIFT) 162 163 /* Bitfields for the first word of an Isochronous Transfer Desciptor. */ 164 /* CC & DI - same as in the General Transfer Desciptor */ 165 #define OHCI_TD_SF_SHIFT 0 166 #define OHCI_TD_SF_MASK (0xffff<<OHCI_TD_SF_SHIFT) 167 #define OHCI_TD_FC_SHIFT 24 168 #define OHCI_TD_FC_MASK (7<<OHCI_TD_FC_SHIFT) 169 170 /* Isochronous Transfer Desciptor - Offset / PacketStatusWord */ 171 #define OHCI_TD_PSW_CC_SHIFT 12 172 #define OHCI_TD_PSW_CC_MASK (0xf<<OHCI_TD_PSW_CC_SHIFT) 173 #define OHCI_TD_PSW_SIZE_SHIFT 0 174 #define OHCI_TD_PSW_SIZE_MASK (0xfff<<OHCI_TD_PSW_SIZE_SHIFT) 175 176 #define OHCI_PAGE_MASK 0xfffff000 177 #define OHCI_OFFSET_MASK 0xfff 178 179 #define OHCI_DPTR_MASK 0xfffffff0 180 181 #define OHCI_BM(val, field) \ 182 (((val) & OHCI_##field##_MASK) >> OHCI_##field##_SHIFT) 183 184 #define OHCI_SET_BM(val, field, newval) do { \ 185 val &= ~OHCI_##field##_MASK; \ 186 val |= ((newval) << OHCI_##field##_SHIFT) & OHCI_##field##_MASK; \ 187 } while(0) 188 189 /* endpoint descriptor */ 190 struct ohci_ed { 191 uint32_t flags; 192 uint32_t tail; 193 uint32_t head; 194 uint32_t next; 195 }; 196 197 /* General transfer descriptor */ 198 struct ohci_td { 199 uint32_t flags; 200 uint32_t cbp; 201 uint32_t next; 202 uint32_t be; 203 }; 204 205 /* Isochronous transfer descriptor */ 206 struct ohci_iso_td { 207 uint32_t flags; 208 uint32_t bp; 209 uint32_t next; 210 uint32_t be; 211 uint16_t offset[8]; 212 }; 213 214 #define USB_HZ 12000000 215 216 /* OHCI Local stuff */ 217 #define OHCI_CTL_CBSR ((1<<0)|(1<<1)) 218 #define OHCI_CTL_PLE (1<<2) 219 #define OHCI_CTL_IE (1<<3) 220 #define OHCI_CTL_CLE (1<<4) 221 #define OHCI_CTL_BLE (1<<5) 222 #define OHCI_CTL_HCFS ((1<<6)|(1<<7)) 223 #define OHCI_USB_RESET 0x00 224 #define OHCI_USB_RESUME 0x40 225 #define OHCI_USB_OPERATIONAL 0x80 226 #define OHCI_USB_SUSPEND 0xc0 227 #define OHCI_CTL_IR (1<<8) 228 #define OHCI_CTL_RWC (1<<9) 229 #define OHCI_CTL_RWE (1<<10) 230 231 #define OHCI_STATUS_HCR (1<<0) 232 #define OHCI_STATUS_CLF (1<<1) 233 #define OHCI_STATUS_BLF (1<<2) 234 #define OHCI_STATUS_OCR (1<<3) 235 #define OHCI_STATUS_SOC ((1<<6)|(1<<7)) 236 237 #define OHCI_INTR_SO (1<<0) /* Scheduling overrun */ 238 #define OHCI_INTR_WD (1<<1) /* HcDoneHead writeback */ 239 #define OHCI_INTR_SF (1<<2) /* Start of frame */ 240 #define OHCI_INTR_RD (1<<3) /* Resume detect */ 241 #define OHCI_INTR_UE (1<<4) /* Unrecoverable error */ 242 #define OHCI_INTR_FNO (1<<5) /* Frame number overflow */ 243 #define OHCI_INTR_RHSC (1<<6) /* Root hub status change */ 244 #define OHCI_INTR_OC (1<<30) /* Ownership change */ 245 #define OHCI_INTR_MIE (1<<31) /* Master Interrupt Enable */ 246 247 #define OHCI_HCCA_SIZE 0x100 248 #define OHCI_HCCA_MASK 0xffffff00 249 250 #define OHCI_EDPTR_MASK 0xfffffff0 251 252 #define OHCI_FMI_FI 0x00003fff 253 #define OHCI_FMI_FSMPS 0xffff0000 254 #define OHCI_FMI_FIT 0x80000000 255 256 #define OHCI_FR_RT (1<<31) 257 258 #define OHCI_LS_THRESH 0x628 259 260 #define OHCI_RHA_RW_MASK 0x00000000 /* Mask of supported features. */ 261 #define OHCI_RHA_PSM (1<<8) 262 #define OHCI_RHA_NPS (1<<9) 263 #define OHCI_RHA_DT (1<<10) 264 #define OHCI_RHA_OCPM (1<<11) 265 #define OHCI_RHA_NOCP (1<<12) 266 #define OHCI_RHA_POTPGT_MASK 0xff000000 267 268 #define OHCI_RHS_LPS (1<<0) 269 #define OHCI_RHS_OCI (1<<1) 270 #define OHCI_RHS_DRWE (1<<15) 271 #define OHCI_RHS_LPSC (1<<16) 272 #define OHCI_RHS_OCIC (1<<17) 273 #define OHCI_RHS_CRWE (1<<31) 274 275 #define OHCI_PORT_CCS (1<<0) 276 #define OHCI_PORT_PES (1<<1) 277 #define OHCI_PORT_PSS (1<<2) 278 #define OHCI_PORT_POCI (1<<3) 279 #define OHCI_PORT_PRS (1<<4) 280 #define OHCI_PORT_PPS (1<<8) 281 #define OHCI_PORT_LSDA (1<<9) 282 #define OHCI_PORT_CSC (1<<16) 283 #define OHCI_PORT_PESC (1<<17) 284 #define OHCI_PORT_PSSC (1<<18) 285 #define OHCI_PORT_OCIC (1<<19) 286 #define OHCI_PORT_PRSC (1<<20) 287 #define OHCI_PORT_WTC (OHCI_PORT_CSC|OHCI_PORT_PESC|OHCI_PORT_PSSC \ 288 |OHCI_PORT_OCIC|OHCI_PORT_PRSC) 289 290 #define OHCI_TD_DIR_SETUP 0x0 291 #define OHCI_TD_DIR_OUT 0x1 292 #define OHCI_TD_DIR_IN 0x2 293 #define OHCI_TD_DIR_RESERVED 0x3 294 295 #define OHCI_CC_NOERROR 0x0 296 #define OHCI_CC_CRC 0x1 297 #define OHCI_CC_BITSTUFFING 0x2 298 #define OHCI_CC_DATATOGGLEMISMATCH 0x3 299 #define OHCI_CC_STALL 0x4 300 #define OHCI_CC_DEVICENOTRESPONDING 0x5 301 #define OHCI_CC_PIDCHECKFAILURE 0x6 302 #define OHCI_CC_UNDEXPETEDPID 0x7 303 #define OHCI_CC_DATAOVERRUN 0x8 304 #define OHCI_CC_DATAUNDERRUN 0x9 305 #define OHCI_CC_BUFFEROVERRUN 0xc 306 #define OHCI_CC_BUFFERUNDERRUN 0xd 307 308 #define OHCI_HRESET_FSBIR (1 << 0) 309 310 static void ohci_die(OHCIState *ohci); 311 312 /* Update IRQ levels */ 313 static inline void ohci_intr_update(OHCIState *ohci) 314 { 315 int level = 0; 316 317 if ((ohci->intr & OHCI_INTR_MIE) && 318 (ohci->intr_status & ohci->intr)) 319 level = 1; 320 321 qemu_set_irq(ohci->irq, level); 322 } 323 324 /* Set an interrupt */ 325 static inline void ohci_set_interrupt(OHCIState *ohci, uint32_t intr) 326 { 327 ohci->intr_status |= intr; 328 ohci_intr_update(ohci); 329 } 330 331 /* Attach or detach a device on a root hub port. */ 332 static void ohci_attach(USBPort *port1) 333 { 334 OHCIState *s = port1->opaque; 335 OHCIPort *port = &s->rhport[port1->index]; 336 uint32_t old_state = port->ctrl; 337 338 /* set connect status */ 339 port->ctrl |= OHCI_PORT_CCS | OHCI_PORT_CSC; 340 341 /* update speed */ 342 if (port->port.dev->speed == USB_SPEED_LOW) { 343 port->ctrl |= OHCI_PORT_LSDA; 344 } else { 345 port->ctrl &= ~OHCI_PORT_LSDA; 346 } 347 348 /* notify of remote-wakeup */ 349 if ((s->ctl & OHCI_CTL_HCFS) == OHCI_USB_SUSPEND) { 350 ohci_set_interrupt(s, OHCI_INTR_RD); 351 } 352 353 DPRINTF("usb-ohci: Attached port %d\n", port1->index); 354 355 if (old_state != port->ctrl) { 356 ohci_set_interrupt(s, OHCI_INTR_RHSC); 357 } 358 } 359 360 static void ohci_detach(USBPort *port1) 361 { 362 OHCIState *s = port1->opaque; 363 OHCIPort *port = &s->rhport[port1->index]; 364 uint32_t old_state = port->ctrl; 365 366 ohci_async_cancel_device(s, port1->dev); 367 368 /* set connect status */ 369 if (port->ctrl & OHCI_PORT_CCS) { 370 port->ctrl &= ~OHCI_PORT_CCS; 371 port->ctrl |= OHCI_PORT_CSC; 372 } 373 /* disable port */ 374 if (port->ctrl & OHCI_PORT_PES) { 375 port->ctrl &= ~OHCI_PORT_PES; 376 port->ctrl |= OHCI_PORT_PESC; 377 } 378 DPRINTF("usb-ohci: Detached port %d\n", port1->index); 379 380 if (old_state != port->ctrl) { 381 ohci_set_interrupt(s, OHCI_INTR_RHSC); 382 } 383 } 384 385 static void ohci_wakeup(USBPort *port1) 386 { 387 OHCIState *s = port1->opaque; 388 OHCIPort *port = &s->rhport[port1->index]; 389 uint32_t intr = 0; 390 if (port->ctrl & OHCI_PORT_PSS) { 391 DPRINTF("usb-ohci: port %d: wakeup\n", port1->index); 392 port->ctrl |= OHCI_PORT_PSSC; 393 port->ctrl &= ~OHCI_PORT_PSS; 394 intr = OHCI_INTR_RHSC; 395 } 396 /* Note that the controller can be suspended even if this port is not */ 397 if ((s->ctl & OHCI_CTL_HCFS) == OHCI_USB_SUSPEND) { 398 DPRINTF("usb-ohci: remote-wakeup: SUSPEND->RESUME\n"); 399 /* This is the one state transition the controller can do by itself */ 400 s->ctl &= ~OHCI_CTL_HCFS; 401 s->ctl |= OHCI_USB_RESUME; 402 /* In suspend mode only ResumeDetected is possible, not RHSC: 403 * see the OHCI spec 5.1.2.3. 404 */ 405 intr = OHCI_INTR_RD; 406 } 407 ohci_set_interrupt(s, intr); 408 } 409 410 static void ohci_child_detach(USBPort *port1, USBDevice *child) 411 { 412 OHCIState *s = port1->opaque; 413 414 ohci_async_cancel_device(s, child); 415 } 416 417 static USBDevice *ohci_find_device(OHCIState *ohci, uint8_t addr) 418 { 419 USBDevice *dev; 420 int i; 421 422 for (i = 0; i < ohci->num_ports; i++) { 423 if ((ohci->rhport[i].ctrl & OHCI_PORT_PES) == 0) { 424 continue; 425 } 426 dev = usb_find_device(&ohci->rhport[i].port, addr); 427 if (dev != NULL) { 428 return dev; 429 } 430 } 431 return NULL; 432 } 433 434 static void ohci_stop_endpoints(OHCIState *ohci) 435 { 436 USBDevice *dev; 437 int i, j; 438 439 for (i = 0; i < ohci->num_ports; i++) { 440 dev = ohci->rhport[i].port.dev; 441 if (dev && dev->attached) { 442 usb_device_ep_stopped(dev, &dev->ep_ctl); 443 for (j = 0; j < USB_MAX_ENDPOINTS; j++) { 444 usb_device_ep_stopped(dev, &dev->ep_in[j]); 445 usb_device_ep_stopped(dev, &dev->ep_out[j]); 446 } 447 } 448 } 449 } 450 451 /* Reset the controller */ 452 static void ohci_reset(void *opaque) 453 { 454 OHCIState *ohci = opaque; 455 OHCIPort *port; 456 int i; 457 458 ohci_bus_stop(ohci); 459 ohci->ctl = 0; 460 ohci->old_ctl = 0; 461 ohci->status = 0; 462 ohci->intr_status = 0; 463 ohci->intr = OHCI_INTR_MIE; 464 465 ohci->hcca = 0; 466 ohci->ctrl_head = ohci->ctrl_cur = 0; 467 ohci->bulk_head = ohci->bulk_cur = 0; 468 ohci->per_cur = 0; 469 ohci->done = 0; 470 ohci->done_count = 7; 471 472 /* FSMPS is marked TBD in OCHI 1.0, what gives ffs? 473 * I took the value linux sets ... 474 */ 475 ohci->fsmps = 0x2778; 476 ohci->fi = 0x2edf; 477 ohci->fit = 0; 478 ohci->frt = 0; 479 ohci->frame_number = 0; 480 ohci->pstart = 0; 481 ohci->lst = OHCI_LS_THRESH; 482 483 ohci->rhdesc_a = OHCI_RHA_NPS | ohci->num_ports; 484 ohci->rhdesc_b = 0x0; /* Impl. specific */ 485 ohci->rhstatus = 0; 486 487 for (i = 0; i < ohci->num_ports; i++) 488 { 489 port = &ohci->rhport[i]; 490 port->ctrl = 0; 491 if (port->port.dev && port->port.dev->attached) { 492 usb_port_reset(&port->port); 493 } 494 } 495 if (ohci->async_td) { 496 usb_cancel_packet(&ohci->usb_packet); 497 ohci->async_td = 0; 498 } 499 ohci_stop_endpoints(ohci); 500 DPRINTF("usb-ohci: Reset %s\n", ohci->name); 501 } 502 503 /* Get an array of dwords from main memory */ 504 static inline int get_dwords(OHCIState *ohci, 505 dma_addr_t addr, uint32_t *buf, int num) 506 { 507 int i; 508 509 addr += ohci->localmem_base; 510 511 for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { 512 if (dma_memory_read(ohci->as, addr, buf, sizeof(*buf))) { 513 return -1; 514 } 515 *buf = le32_to_cpu(*buf); 516 } 517 518 return 0; 519 } 520 521 /* Put an array of dwords in to main memory */ 522 static inline int put_dwords(OHCIState *ohci, 523 dma_addr_t addr, uint32_t *buf, int num) 524 { 525 int i; 526 527 addr += ohci->localmem_base; 528 529 for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { 530 uint32_t tmp = cpu_to_le32(*buf); 531 if (dma_memory_write(ohci->as, addr, &tmp, sizeof(tmp))) { 532 return -1; 533 } 534 } 535 536 return 0; 537 } 538 539 /* Get an array of words from main memory */ 540 static inline int get_words(OHCIState *ohci, 541 dma_addr_t addr, uint16_t *buf, int num) 542 { 543 int i; 544 545 addr += ohci->localmem_base; 546 547 for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { 548 if (dma_memory_read(ohci->as, addr, buf, sizeof(*buf))) { 549 return -1; 550 } 551 *buf = le16_to_cpu(*buf); 552 } 553 554 return 0; 555 } 556 557 /* Put an array of words in to main memory */ 558 static inline int put_words(OHCIState *ohci, 559 dma_addr_t addr, uint16_t *buf, int num) 560 { 561 int i; 562 563 addr += ohci->localmem_base; 564 565 for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { 566 uint16_t tmp = cpu_to_le16(*buf); 567 if (dma_memory_write(ohci->as, addr, &tmp, sizeof(tmp))) { 568 return -1; 569 } 570 } 571 572 return 0; 573 } 574 575 static inline int ohci_read_ed(OHCIState *ohci, 576 dma_addr_t addr, struct ohci_ed *ed) 577 { 578 return get_dwords(ohci, addr, (uint32_t *)ed, sizeof(*ed) >> 2); 579 } 580 581 static inline int ohci_read_td(OHCIState *ohci, 582 dma_addr_t addr, struct ohci_td *td) 583 { 584 return get_dwords(ohci, addr, (uint32_t *)td, sizeof(*td) >> 2); 585 } 586 587 static inline int ohci_read_iso_td(OHCIState *ohci, 588 dma_addr_t addr, struct ohci_iso_td *td) 589 { 590 return get_dwords(ohci, addr, (uint32_t *)td, 4) || 591 get_words(ohci, addr + 16, td->offset, 8); 592 } 593 594 static inline int ohci_read_hcca(OHCIState *ohci, 595 dma_addr_t addr, struct ohci_hcca *hcca) 596 { 597 return dma_memory_read(ohci->as, addr + ohci->localmem_base, 598 hcca, sizeof(*hcca)); 599 } 600 601 static inline int ohci_put_ed(OHCIState *ohci, 602 dma_addr_t addr, struct ohci_ed *ed) 603 { 604 /* ed->tail is under control of the HCD. 605 * Since just ed->head is changed by HC, just write back this 606 */ 607 608 return put_dwords(ohci, addr + ED_WBACK_OFFSET, 609 (uint32_t *)((char *)ed + ED_WBACK_OFFSET), 610 ED_WBACK_SIZE >> 2); 611 } 612 613 static inline int ohci_put_td(OHCIState *ohci, 614 dma_addr_t addr, struct ohci_td *td) 615 { 616 return put_dwords(ohci, addr, (uint32_t *)td, sizeof(*td) >> 2); 617 } 618 619 static inline int ohci_put_iso_td(OHCIState *ohci, 620 dma_addr_t addr, struct ohci_iso_td *td) 621 { 622 return put_dwords(ohci, addr, (uint32_t *)td, 4 || 623 put_words(ohci, addr + 16, td->offset, 8)); 624 } 625 626 static inline int ohci_put_hcca(OHCIState *ohci, 627 dma_addr_t addr, struct ohci_hcca *hcca) 628 { 629 return dma_memory_write(ohci->as, 630 addr + ohci->localmem_base + HCCA_WRITEBACK_OFFSET, 631 (char *)hcca + HCCA_WRITEBACK_OFFSET, 632 HCCA_WRITEBACK_SIZE); 633 } 634 635 /* Read/Write the contents of a TD from/to main memory. */ 636 static int ohci_copy_td(OHCIState *ohci, struct ohci_td *td, 637 uint8_t *buf, int len, DMADirection dir) 638 { 639 dma_addr_t ptr, n; 640 641 ptr = td->cbp; 642 n = 0x1000 - (ptr & 0xfff); 643 if (n > len) 644 n = len; 645 646 if (dma_memory_rw(ohci->as, ptr + ohci->localmem_base, buf, n, dir)) { 647 return -1; 648 } 649 if (n == len) { 650 return 0; 651 } 652 ptr = td->be & ~0xfffu; 653 buf += n; 654 if (dma_memory_rw(ohci->as, ptr + ohci->localmem_base, buf, 655 len - n, dir)) { 656 return -1; 657 } 658 return 0; 659 } 660 661 /* Read/Write the contents of an ISO TD from/to main memory. */ 662 static int ohci_copy_iso_td(OHCIState *ohci, 663 uint32_t start_addr, uint32_t end_addr, 664 uint8_t *buf, int len, DMADirection dir) 665 { 666 dma_addr_t ptr, n; 667 668 ptr = start_addr; 669 n = 0x1000 - (ptr & 0xfff); 670 if (n > len) 671 n = len; 672 673 if (dma_memory_rw(ohci->as, ptr + ohci->localmem_base, buf, n, dir)) { 674 return -1; 675 } 676 if (n == len) { 677 return 0; 678 } 679 ptr = end_addr & ~0xfffu; 680 buf += n; 681 if (dma_memory_rw(ohci->as, ptr + ohci->localmem_base, buf, 682 len - n, dir)) { 683 return -1; 684 } 685 return 0; 686 } 687 688 static void ohci_process_lists(OHCIState *ohci, int completion); 689 690 static void ohci_async_complete_packet(USBPort *port, USBPacket *packet) 691 { 692 OHCIState *ohci = container_of(packet, OHCIState, usb_packet); 693 #ifdef DEBUG_PACKET 694 DPRINTF("Async packet complete\n"); 695 #endif 696 ohci->async_complete = 1; 697 ohci_process_lists(ohci, 1); 698 } 699 700 #define USUB(a, b) ((int16_t)((uint16_t)(a) - (uint16_t)(b))) 701 702 static int ohci_service_iso_td(OHCIState *ohci, struct ohci_ed *ed, 703 int completion) 704 { 705 int dir; 706 size_t len = 0; 707 #ifdef DEBUG_ISOCH 708 const char *str = NULL; 709 #endif 710 int pid; 711 int ret; 712 int i; 713 USBDevice *dev; 714 USBEndpoint *ep; 715 struct ohci_iso_td iso_td; 716 uint32_t addr; 717 uint16_t starting_frame; 718 int16_t relative_frame_number; 719 int frame_count; 720 uint32_t start_offset, next_offset, end_offset = 0; 721 uint32_t start_addr, end_addr; 722 723 addr = ed->head & OHCI_DPTR_MASK; 724 725 if (ohci_read_iso_td(ohci, addr, &iso_td)) { 726 printf("usb-ohci: ISO_TD read error at %x\n", addr); 727 ohci_die(ohci); 728 return 0; 729 } 730 731 starting_frame = OHCI_BM(iso_td.flags, TD_SF); 732 frame_count = OHCI_BM(iso_td.flags, TD_FC); 733 relative_frame_number = USUB(ohci->frame_number, starting_frame); 734 735 #ifdef DEBUG_ISOCH 736 printf("--- ISO_TD ED head 0x%.8x tailp 0x%.8x\n" 737 "0x%.8x 0x%.8x 0x%.8x 0x%.8x\n" 738 "0x%.8x 0x%.8x 0x%.8x 0x%.8x\n" 739 "0x%.8x 0x%.8x 0x%.8x 0x%.8x\n" 740 "frame_number 0x%.8x starting_frame 0x%.8x\n" 741 "frame_count 0x%.8x relative %d\n" 742 "di 0x%.8x cc 0x%.8x\n", 743 ed->head & OHCI_DPTR_MASK, ed->tail & OHCI_DPTR_MASK, 744 iso_td.flags, iso_td.bp, iso_td.next, iso_td.be, 745 iso_td.offset[0], iso_td.offset[1], iso_td.offset[2], iso_td.offset[3], 746 iso_td.offset[4], iso_td.offset[5], iso_td.offset[6], iso_td.offset[7], 747 ohci->frame_number, starting_frame, 748 frame_count, relative_frame_number, 749 OHCI_BM(iso_td.flags, TD_DI), OHCI_BM(iso_td.flags, TD_CC)); 750 #endif 751 752 if (relative_frame_number < 0) { 753 DPRINTF("usb-ohci: ISO_TD R=%d < 0\n", relative_frame_number); 754 return 1; 755 } else if (relative_frame_number > frame_count) { 756 /* ISO TD expired - retire the TD to the Done Queue and continue with 757 the next ISO TD of the same ED */ 758 DPRINTF("usb-ohci: ISO_TD R=%d > FC=%d\n", relative_frame_number, 759 frame_count); 760 OHCI_SET_BM(iso_td.flags, TD_CC, OHCI_CC_DATAOVERRUN); 761 ed->head &= ~OHCI_DPTR_MASK; 762 ed->head |= (iso_td.next & OHCI_DPTR_MASK); 763 iso_td.next = ohci->done; 764 ohci->done = addr; 765 i = OHCI_BM(iso_td.flags, TD_DI); 766 if (i < ohci->done_count) 767 ohci->done_count = i; 768 if (ohci_put_iso_td(ohci, addr, &iso_td)) { 769 ohci_die(ohci); 770 return 1; 771 } 772 return 0; 773 } 774 775 dir = OHCI_BM(ed->flags, ED_D); 776 switch (dir) { 777 case OHCI_TD_DIR_IN: 778 #ifdef DEBUG_ISOCH 779 str = "in"; 780 #endif 781 pid = USB_TOKEN_IN; 782 break; 783 case OHCI_TD_DIR_OUT: 784 #ifdef DEBUG_ISOCH 785 str = "out"; 786 #endif 787 pid = USB_TOKEN_OUT; 788 break; 789 case OHCI_TD_DIR_SETUP: 790 #ifdef DEBUG_ISOCH 791 str = "setup"; 792 #endif 793 pid = USB_TOKEN_SETUP; 794 break; 795 default: 796 printf("usb-ohci: Bad direction %d\n", dir); 797 return 1; 798 } 799 800 if (!iso_td.bp || !iso_td.be) { 801 printf("usb-ohci: ISO_TD bp 0x%.8x be 0x%.8x\n", iso_td.bp, iso_td.be); 802 return 1; 803 } 804 805 start_offset = iso_td.offset[relative_frame_number]; 806 next_offset = iso_td.offset[relative_frame_number + 1]; 807 808 if (!(OHCI_BM(start_offset, TD_PSW_CC) & 0xe) || 809 ((relative_frame_number < frame_count) && 810 !(OHCI_BM(next_offset, TD_PSW_CC) & 0xe))) { 811 printf("usb-ohci: ISO_TD cc != not accessed 0x%.8x 0x%.8x\n", 812 start_offset, next_offset); 813 return 1; 814 } 815 816 if ((relative_frame_number < frame_count) && (start_offset > next_offset)) { 817 printf("usb-ohci: ISO_TD start_offset=0x%.8x > next_offset=0x%.8x\n", 818 start_offset, next_offset); 819 return 1; 820 } 821 822 if ((start_offset & 0x1000) == 0) { 823 start_addr = (iso_td.bp & OHCI_PAGE_MASK) | 824 (start_offset & OHCI_OFFSET_MASK); 825 } else { 826 start_addr = (iso_td.be & OHCI_PAGE_MASK) | 827 (start_offset & OHCI_OFFSET_MASK); 828 } 829 830 if (relative_frame_number < frame_count) { 831 end_offset = next_offset - 1; 832 if ((end_offset & 0x1000) == 0) { 833 end_addr = (iso_td.bp & OHCI_PAGE_MASK) | 834 (end_offset & OHCI_OFFSET_MASK); 835 } else { 836 end_addr = (iso_td.be & OHCI_PAGE_MASK) | 837 (end_offset & OHCI_OFFSET_MASK); 838 } 839 } else { 840 /* Last packet in the ISO TD */ 841 end_addr = iso_td.be; 842 } 843 844 if ((start_addr & OHCI_PAGE_MASK) != (end_addr & OHCI_PAGE_MASK)) { 845 len = (end_addr & OHCI_OFFSET_MASK) + 0x1001 846 - (start_addr & OHCI_OFFSET_MASK); 847 } else { 848 len = end_addr - start_addr + 1; 849 } 850 851 if (len && dir != OHCI_TD_DIR_IN) { 852 if (ohci_copy_iso_td(ohci, start_addr, end_addr, ohci->usb_buf, len, 853 DMA_DIRECTION_TO_DEVICE)) { 854 ohci_die(ohci); 855 return 1; 856 } 857 } 858 859 if (!completion) { 860 bool int_req = relative_frame_number == frame_count && 861 OHCI_BM(iso_td.flags, TD_DI) == 0; 862 dev = ohci_find_device(ohci, OHCI_BM(ed->flags, ED_FA)); 863 ep = usb_ep_get(dev, pid, OHCI_BM(ed->flags, ED_EN)); 864 usb_packet_setup(&ohci->usb_packet, pid, ep, 0, addr, false, int_req); 865 usb_packet_addbuf(&ohci->usb_packet, ohci->usb_buf, len); 866 usb_handle_packet(dev, &ohci->usb_packet); 867 if (ohci->usb_packet.status == USB_RET_ASYNC) { 868 usb_device_flush_ep_queue(dev, ep); 869 return 1; 870 } 871 } 872 if (ohci->usb_packet.status == USB_RET_SUCCESS) { 873 ret = ohci->usb_packet.actual_length; 874 } else { 875 ret = ohci->usb_packet.status; 876 } 877 878 #ifdef DEBUG_ISOCH 879 printf("so 0x%.8x eo 0x%.8x\nsa 0x%.8x ea 0x%.8x\ndir %s len %zu ret %d\n", 880 start_offset, end_offset, start_addr, end_addr, str, len, ret); 881 #endif 882 883 /* Writeback */ 884 if (dir == OHCI_TD_DIR_IN && ret >= 0 && ret <= len) { 885 /* IN transfer succeeded */ 886 if (ohci_copy_iso_td(ohci, start_addr, end_addr, ohci->usb_buf, ret, 887 DMA_DIRECTION_FROM_DEVICE)) { 888 ohci_die(ohci); 889 return 1; 890 } 891 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, 892 OHCI_CC_NOERROR); 893 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, ret); 894 } else if (dir == OHCI_TD_DIR_OUT && ret == len) { 895 /* OUT transfer succeeded */ 896 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, 897 OHCI_CC_NOERROR); 898 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, 0); 899 } else { 900 if (ret > (ssize_t) len) { 901 printf("usb-ohci: DataOverrun %d > %zu\n", ret, len); 902 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, 903 OHCI_CC_DATAOVERRUN); 904 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, 905 len); 906 } else if (ret >= 0) { 907 printf("usb-ohci: DataUnderrun %d\n", ret); 908 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, 909 OHCI_CC_DATAUNDERRUN); 910 } else { 911 switch (ret) { 912 case USB_RET_IOERROR: 913 case USB_RET_NODEV: 914 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, 915 OHCI_CC_DEVICENOTRESPONDING); 916 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, 917 0); 918 break; 919 case USB_RET_NAK: 920 case USB_RET_STALL: 921 printf("usb-ohci: got NAK/STALL %d\n", ret); 922 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, 923 OHCI_CC_STALL); 924 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, 925 0); 926 break; 927 default: 928 printf("usb-ohci: Bad device response %d\n", ret); 929 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, 930 OHCI_CC_UNDEXPETEDPID); 931 break; 932 } 933 } 934 } 935 936 if (relative_frame_number == frame_count) { 937 /* Last data packet of ISO TD - retire the TD to the Done Queue */ 938 OHCI_SET_BM(iso_td.flags, TD_CC, OHCI_CC_NOERROR); 939 ed->head &= ~OHCI_DPTR_MASK; 940 ed->head |= (iso_td.next & OHCI_DPTR_MASK); 941 iso_td.next = ohci->done; 942 ohci->done = addr; 943 i = OHCI_BM(iso_td.flags, TD_DI); 944 if (i < ohci->done_count) 945 ohci->done_count = i; 946 } 947 if (ohci_put_iso_td(ohci, addr, &iso_td)) { 948 ohci_die(ohci); 949 } 950 return 1; 951 } 952 953 /* Service a transport descriptor. 954 Returns nonzero to terminate processing of this endpoint. */ 955 956 static int ohci_service_td(OHCIState *ohci, struct ohci_ed *ed) 957 { 958 int dir; 959 size_t len = 0, pktlen = 0; 960 #ifdef DEBUG_PACKET 961 const char *str = NULL; 962 #endif 963 int pid; 964 int ret; 965 int i; 966 USBDevice *dev; 967 USBEndpoint *ep; 968 struct ohci_td td; 969 uint32_t addr; 970 int flag_r; 971 int completion; 972 973 addr = ed->head & OHCI_DPTR_MASK; 974 /* See if this TD has already been submitted to the device. */ 975 completion = (addr == ohci->async_td); 976 if (completion && !ohci->async_complete) { 977 #ifdef DEBUG_PACKET 978 DPRINTF("Skipping async TD\n"); 979 #endif 980 return 1; 981 } 982 if (ohci_read_td(ohci, addr, &td)) { 983 fprintf(stderr, "usb-ohci: TD read error at %x\n", addr); 984 ohci_die(ohci); 985 return 0; 986 } 987 988 dir = OHCI_BM(ed->flags, ED_D); 989 switch (dir) { 990 case OHCI_TD_DIR_OUT: 991 case OHCI_TD_DIR_IN: 992 /* Same value. */ 993 break; 994 default: 995 dir = OHCI_BM(td.flags, TD_DP); 996 break; 997 } 998 999 switch (dir) { 1000 case OHCI_TD_DIR_IN: 1001 #ifdef DEBUG_PACKET 1002 str = "in"; 1003 #endif 1004 pid = USB_TOKEN_IN; 1005 break; 1006 case OHCI_TD_DIR_OUT: 1007 #ifdef DEBUG_PACKET 1008 str = "out"; 1009 #endif 1010 pid = USB_TOKEN_OUT; 1011 break; 1012 case OHCI_TD_DIR_SETUP: 1013 #ifdef DEBUG_PACKET 1014 str = "setup"; 1015 #endif 1016 pid = USB_TOKEN_SETUP; 1017 break; 1018 default: 1019 fprintf(stderr, "usb-ohci: Bad direction\n"); 1020 return 1; 1021 } 1022 if (td.cbp && td.be) { 1023 if ((td.cbp & 0xfffff000) != (td.be & 0xfffff000)) { 1024 len = (td.be & 0xfff) + 0x1001 - (td.cbp & 0xfff); 1025 } else { 1026 len = (td.be - td.cbp) + 1; 1027 } 1028 1029 pktlen = len; 1030 if (len && dir != OHCI_TD_DIR_IN) { 1031 /* The endpoint may not allow us to transfer it all now */ 1032 pktlen = (ed->flags & OHCI_ED_MPS_MASK) >> OHCI_ED_MPS_SHIFT; 1033 if (pktlen > len) { 1034 pktlen = len; 1035 } 1036 if (!completion) { 1037 if (ohci_copy_td(ohci, &td, ohci->usb_buf, pktlen, 1038 DMA_DIRECTION_TO_DEVICE)) { 1039 ohci_die(ohci); 1040 } 1041 } 1042 } 1043 } 1044 1045 flag_r = (td.flags & OHCI_TD_R) != 0; 1046 #ifdef DEBUG_PACKET 1047 DPRINTF(" TD @ 0x%.8x %" PRId64 " of %" PRId64 1048 " bytes %s r=%d cbp=0x%.8x be=0x%.8x\n", 1049 addr, (int64_t)pktlen, (int64_t)len, str, flag_r, td.cbp, td.be); 1050 1051 if (pktlen > 0 && dir != OHCI_TD_DIR_IN) { 1052 DPRINTF(" data:"); 1053 for (i = 0; i < pktlen; i++) { 1054 printf(" %.2x", ohci->usb_buf[i]); 1055 } 1056 DPRINTF("\n"); 1057 } 1058 #endif 1059 if (completion) { 1060 ohci->async_td = 0; 1061 ohci->async_complete = 0; 1062 } else { 1063 if (ohci->async_td) { 1064 /* ??? The hardware should allow one active packet per 1065 endpoint. We only allow one active packet per controller. 1066 This should be sufficient as long as devices respond in a 1067 timely manner. 1068 */ 1069 #ifdef DEBUG_PACKET 1070 DPRINTF("Too many pending packets\n"); 1071 #endif 1072 return 1; 1073 } 1074 dev = ohci_find_device(ohci, OHCI_BM(ed->flags, ED_FA)); 1075 ep = usb_ep_get(dev, pid, OHCI_BM(ed->flags, ED_EN)); 1076 usb_packet_setup(&ohci->usb_packet, pid, ep, 0, addr, !flag_r, 1077 OHCI_BM(td.flags, TD_DI) == 0); 1078 usb_packet_addbuf(&ohci->usb_packet, ohci->usb_buf, pktlen); 1079 usb_handle_packet(dev, &ohci->usb_packet); 1080 #ifdef DEBUG_PACKET 1081 DPRINTF("status=%d\n", ohci->usb_packet.status); 1082 #endif 1083 if (ohci->usb_packet.status == USB_RET_ASYNC) { 1084 usb_device_flush_ep_queue(dev, ep); 1085 ohci->async_td = addr; 1086 return 1; 1087 } 1088 } 1089 if (ohci->usb_packet.status == USB_RET_SUCCESS) { 1090 ret = ohci->usb_packet.actual_length; 1091 } else { 1092 ret = ohci->usb_packet.status; 1093 } 1094 1095 if (ret >= 0) { 1096 if (dir == OHCI_TD_DIR_IN) { 1097 if (ohci_copy_td(ohci, &td, ohci->usb_buf, ret, 1098 DMA_DIRECTION_FROM_DEVICE)) { 1099 ohci_die(ohci); 1100 } 1101 #ifdef DEBUG_PACKET 1102 DPRINTF(" data:"); 1103 for (i = 0; i < ret; i++) 1104 printf(" %.2x", ohci->usb_buf[i]); 1105 DPRINTF("\n"); 1106 #endif 1107 } else { 1108 ret = pktlen; 1109 } 1110 } 1111 1112 /* Writeback */ 1113 if (ret == pktlen || (dir == OHCI_TD_DIR_IN && ret >= 0 && flag_r)) { 1114 /* Transmission succeeded. */ 1115 if (ret == len) { 1116 td.cbp = 0; 1117 } else { 1118 if ((td.cbp & 0xfff) + ret > 0xfff) { 1119 td.cbp = (td.be & ~0xfff) + ((td.cbp + ret) & 0xfff); 1120 } else { 1121 td.cbp += ret; 1122 } 1123 } 1124 td.flags |= OHCI_TD_T1; 1125 td.flags ^= OHCI_TD_T0; 1126 OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_NOERROR); 1127 OHCI_SET_BM(td.flags, TD_EC, 0); 1128 1129 if ((dir != OHCI_TD_DIR_IN) && (ret != len)) { 1130 /* Partial packet transfer: TD not ready to retire yet */ 1131 goto exit_no_retire; 1132 } 1133 1134 /* Setting ED_C is part of the TD retirement process */ 1135 ed->head &= ~OHCI_ED_C; 1136 if (td.flags & OHCI_TD_T0) 1137 ed->head |= OHCI_ED_C; 1138 } else { 1139 if (ret >= 0) { 1140 DPRINTF("usb-ohci: Underrun\n"); 1141 OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DATAUNDERRUN); 1142 } else { 1143 switch (ret) { 1144 case USB_RET_IOERROR: 1145 case USB_RET_NODEV: 1146 DPRINTF("usb-ohci: got DEV ERROR\n"); 1147 OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DEVICENOTRESPONDING); 1148 break; 1149 case USB_RET_NAK: 1150 DPRINTF("usb-ohci: got NAK\n"); 1151 return 1; 1152 case USB_RET_STALL: 1153 DPRINTF("usb-ohci: got STALL\n"); 1154 OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_STALL); 1155 break; 1156 case USB_RET_BABBLE: 1157 DPRINTF("usb-ohci: got BABBLE\n"); 1158 OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DATAOVERRUN); 1159 break; 1160 default: 1161 fprintf(stderr, "usb-ohci: Bad device response %d\n", ret); 1162 OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_UNDEXPETEDPID); 1163 OHCI_SET_BM(td.flags, TD_EC, 3); 1164 break; 1165 } 1166 } 1167 ed->head |= OHCI_ED_H; 1168 } 1169 1170 /* Retire this TD */ 1171 ed->head &= ~OHCI_DPTR_MASK; 1172 ed->head |= td.next & OHCI_DPTR_MASK; 1173 td.next = ohci->done; 1174 ohci->done = addr; 1175 i = OHCI_BM(td.flags, TD_DI); 1176 if (i < ohci->done_count) 1177 ohci->done_count = i; 1178 exit_no_retire: 1179 if (ohci_put_td(ohci, addr, &td)) { 1180 ohci_die(ohci); 1181 return 1; 1182 } 1183 return OHCI_BM(td.flags, TD_CC) != OHCI_CC_NOERROR; 1184 } 1185 1186 /* Service an endpoint list. Returns nonzero if active TD were found. */ 1187 static int ohci_service_ed_list(OHCIState *ohci, uint32_t head, int completion) 1188 { 1189 struct ohci_ed ed; 1190 uint32_t next_ed; 1191 uint32_t cur; 1192 int active; 1193 1194 active = 0; 1195 1196 if (head == 0) 1197 return 0; 1198 1199 for (cur = head; cur; cur = next_ed) { 1200 if (ohci_read_ed(ohci, cur, &ed)) { 1201 fprintf(stderr, "usb-ohci: ED read error at %x\n", cur); 1202 ohci_die(ohci); 1203 return 0; 1204 } 1205 1206 next_ed = ed.next & OHCI_DPTR_MASK; 1207 1208 if ((ed.head & OHCI_ED_H) || (ed.flags & OHCI_ED_K)) { 1209 uint32_t addr; 1210 /* Cancel pending packets for ED that have been paused. */ 1211 addr = ed.head & OHCI_DPTR_MASK; 1212 if (ohci->async_td && addr == ohci->async_td) { 1213 usb_cancel_packet(&ohci->usb_packet); 1214 ohci->async_td = 0; 1215 usb_device_ep_stopped(ohci->usb_packet.ep->dev, 1216 ohci->usb_packet.ep); 1217 } 1218 continue; 1219 } 1220 1221 while ((ed.head & OHCI_DPTR_MASK) != ed.tail) { 1222 #ifdef DEBUG_PACKET 1223 DPRINTF("ED @ 0x%.8x fa=%u en=%u d=%u s=%u k=%u f=%u mps=%u " 1224 "h=%u c=%u\n head=0x%.8x tailp=0x%.8x next=0x%.8x\n", cur, 1225 OHCI_BM(ed.flags, ED_FA), OHCI_BM(ed.flags, ED_EN), 1226 OHCI_BM(ed.flags, ED_D), (ed.flags & OHCI_ED_S)!= 0, 1227 (ed.flags & OHCI_ED_K) != 0, (ed.flags & OHCI_ED_F) != 0, 1228 OHCI_BM(ed.flags, ED_MPS), (ed.head & OHCI_ED_H) != 0, 1229 (ed.head & OHCI_ED_C) != 0, ed.head & OHCI_DPTR_MASK, 1230 ed.tail & OHCI_DPTR_MASK, ed.next & OHCI_DPTR_MASK); 1231 #endif 1232 active = 1; 1233 1234 if ((ed.flags & OHCI_ED_F) == 0) { 1235 if (ohci_service_td(ohci, &ed)) 1236 break; 1237 } else { 1238 /* Handle isochronous endpoints */ 1239 if (ohci_service_iso_td(ohci, &ed, completion)) 1240 break; 1241 } 1242 } 1243 1244 if (ohci_put_ed(ohci, cur, &ed)) { 1245 ohci_die(ohci); 1246 return 0; 1247 } 1248 } 1249 1250 return active; 1251 } 1252 1253 /* Generate a SOF event, and set a timer for EOF */ 1254 static void ohci_sof(OHCIState *ohci) 1255 { 1256 ohci->sof_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); 1257 timer_mod(ohci->eof_timer, ohci->sof_time + usb_frame_time); 1258 ohci_set_interrupt(ohci, OHCI_INTR_SF); 1259 } 1260 1261 /* Process Control and Bulk lists. */ 1262 static void ohci_process_lists(OHCIState *ohci, int completion) 1263 { 1264 if ((ohci->ctl & OHCI_CTL_CLE) && (ohci->status & OHCI_STATUS_CLF)) { 1265 if (ohci->ctrl_cur && ohci->ctrl_cur != ohci->ctrl_head) { 1266 DPRINTF("usb-ohci: head %x, cur %x\n", 1267 ohci->ctrl_head, ohci->ctrl_cur); 1268 } 1269 if (!ohci_service_ed_list(ohci, ohci->ctrl_head, completion)) { 1270 ohci->ctrl_cur = 0; 1271 ohci->status &= ~OHCI_STATUS_CLF; 1272 } 1273 } 1274 1275 if ((ohci->ctl & OHCI_CTL_BLE) && (ohci->status & OHCI_STATUS_BLF)) { 1276 if (!ohci_service_ed_list(ohci, ohci->bulk_head, completion)) { 1277 ohci->bulk_cur = 0; 1278 ohci->status &= ~OHCI_STATUS_BLF; 1279 } 1280 } 1281 } 1282 1283 /* Do frame processing on frame boundary */ 1284 static void ohci_frame_boundary(void *opaque) 1285 { 1286 OHCIState *ohci = opaque; 1287 struct ohci_hcca hcca; 1288 1289 if (ohci_read_hcca(ohci, ohci->hcca, &hcca)) { 1290 fprintf(stderr, "usb-ohci: HCCA read error at %x\n", ohci->hcca); 1291 ohci_die(ohci); 1292 return; 1293 } 1294 1295 /* Process all the lists at the end of the frame */ 1296 if (ohci->ctl & OHCI_CTL_PLE) { 1297 int n; 1298 1299 n = ohci->frame_number & 0x1f; 1300 ohci_service_ed_list(ohci, le32_to_cpu(hcca.intr[n]), 0); 1301 } 1302 1303 /* Cancel all pending packets if either of the lists has been disabled. */ 1304 if (ohci->old_ctl & (~ohci->ctl) & (OHCI_CTL_BLE | OHCI_CTL_CLE)) { 1305 if (ohci->async_td) { 1306 usb_cancel_packet(&ohci->usb_packet); 1307 ohci->async_td = 0; 1308 } 1309 ohci_stop_endpoints(ohci); 1310 } 1311 ohci->old_ctl = ohci->ctl; 1312 ohci_process_lists(ohci, 0); 1313 1314 /* Stop if UnrecoverableError happened or ohci_sof will crash */ 1315 if (ohci->intr_status & OHCI_INTR_UE) { 1316 return; 1317 } 1318 1319 /* Frame boundary, so do EOF stuf here */ 1320 ohci->frt = ohci->fit; 1321 1322 /* Increment frame number and take care of endianness. */ 1323 ohci->frame_number = (ohci->frame_number + 1) & 0xffff; 1324 hcca.frame = cpu_to_le16(ohci->frame_number); 1325 1326 if (ohci->done_count == 0 && !(ohci->intr_status & OHCI_INTR_WD)) { 1327 if (!ohci->done) 1328 abort(); 1329 if (ohci->intr & ohci->intr_status) 1330 ohci->done |= 1; 1331 hcca.done = cpu_to_le32(ohci->done); 1332 ohci->done = 0; 1333 ohci->done_count = 7; 1334 ohci_set_interrupt(ohci, OHCI_INTR_WD); 1335 } 1336 1337 if (ohci->done_count != 7 && ohci->done_count != 0) 1338 ohci->done_count--; 1339 1340 /* Do SOF stuff here */ 1341 ohci_sof(ohci); 1342 1343 /* Writeback HCCA */ 1344 if (ohci_put_hcca(ohci, ohci->hcca, &hcca)) { 1345 ohci_die(ohci); 1346 } 1347 } 1348 1349 /* Start sending SOF tokens across the USB bus, lists are processed in 1350 * next frame 1351 */ 1352 static int ohci_bus_start(OHCIState *ohci) 1353 { 1354 ohci->eof_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, 1355 ohci_frame_boundary, 1356 ohci); 1357 1358 if (ohci->eof_timer == NULL) { 1359 fprintf(stderr, "usb-ohci: %s: timer_new_ns failed\n", ohci->name); 1360 ohci_die(ohci); 1361 return 0; 1362 } 1363 1364 DPRINTF("usb-ohci: %s: USB Operational\n", ohci->name); 1365 1366 ohci_sof(ohci); 1367 1368 return 1; 1369 } 1370 1371 /* Stop sending SOF tokens on the bus */ 1372 static void ohci_bus_stop(OHCIState *ohci) 1373 { 1374 if (ohci->eof_timer) 1375 timer_del(ohci->eof_timer); 1376 ohci->eof_timer = NULL; 1377 } 1378 1379 /* Sets a flag in a port status register but only set it if the port is 1380 * connected, if not set ConnectStatusChange flag. If flag is enabled 1381 * return 1. 1382 */ 1383 static int ohci_port_set_if_connected(OHCIState *ohci, int i, uint32_t val) 1384 { 1385 int ret = 1; 1386 1387 /* writing a 0 has no effect */ 1388 if (val == 0) 1389 return 0; 1390 1391 /* If CurrentConnectStatus is cleared we set 1392 * ConnectStatusChange 1393 */ 1394 if (!(ohci->rhport[i].ctrl & OHCI_PORT_CCS)) { 1395 ohci->rhport[i].ctrl |= OHCI_PORT_CSC; 1396 if (ohci->rhstatus & OHCI_RHS_DRWE) { 1397 /* TODO: CSC is a wakeup event */ 1398 } 1399 return 0; 1400 } 1401 1402 if (ohci->rhport[i].ctrl & val) 1403 ret = 0; 1404 1405 /* set the bit */ 1406 ohci->rhport[i].ctrl |= val; 1407 1408 return ret; 1409 } 1410 1411 /* Set the frame interval - frame interval toggle is manipulated by the hcd only */ 1412 static void ohci_set_frame_interval(OHCIState *ohci, uint16_t val) 1413 { 1414 val &= OHCI_FMI_FI; 1415 1416 if (val != ohci->fi) { 1417 DPRINTF("usb-ohci: %s: FrameInterval = 0x%x (%u)\n", 1418 ohci->name, ohci->fi, ohci->fi); 1419 } 1420 1421 ohci->fi = val; 1422 } 1423 1424 static void ohci_port_power(OHCIState *ohci, int i, int p) 1425 { 1426 if (p) { 1427 ohci->rhport[i].ctrl |= OHCI_PORT_PPS; 1428 } else { 1429 ohci->rhport[i].ctrl &= ~(OHCI_PORT_PPS| 1430 OHCI_PORT_CCS| 1431 OHCI_PORT_PSS| 1432 OHCI_PORT_PRS); 1433 } 1434 } 1435 1436 /* Set HcControlRegister */ 1437 static void ohci_set_ctl(OHCIState *ohci, uint32_t val) 1438 { 1439 uint32_t old_state; 1440 uint32_t new_state; 1441 1442 old_state = ohci->ctl & OHCI_CTL_HCFS; 1443 ohci->ctl = val; 1444 new_state = ohci->ctl & OHCI_CTL_HCFS; 1445 1446 /* no state change */ 1447 if (old_state == new_state) 1448 return; 1449 1450 switch (new_state) { 1451 case OHCI_USB_OPERATIONAL: 1452 ohci_bus_start(ohci); 1453 break; 1454 case OHCI_USB_SUSPEND: 1455 ohci_bus_stop(ohci); 1456 DPRINTF("usb-ohci: %s: USB Suspended\n", ohci->name); 1457 break; 1458 case OHCI_USB_RESUME: 1459 DPRINTF("usb-ohci: %s: USB Resume\n", ohci->name); 1460 break; 1461 case OHCI_USB_RESET: 1462 ohci_reset(ohci); 1463 DPRINTF("usb-ohci: %s: USB Reset\n", ohci->name); 1464 break; 1465 } 1466 } 1467 1468 static uint32_t ohci_get_frame_remaining(OHCIState *ohci) 1469 { 1470 uint16_t fr; 1471 int64_t tks; 1472 1473 if ((ohci->ctl & OHCI_CTL_HCFS) != OHCI_USB_OPERATIONAL) 1474 return (ohci->frt << 31); 1475 1476 /* Being in USB operational state guarnatees sof_time was 1477 * set already. 1478 */ 1479 tks = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) - ohci->sof_time; 1480 1481 /* avoid muldiv if possible */ 1482 if (tks >= usb_frame_time) 1483 return (ohci->frt << 31); 1484 1485 tks = muldiv64(1, tks, usb_bit_time); 1486 fr = (uint16_t)(ohci->fi - tks); 1487 1488 return (ohci->frt << 31) | fr; 1489 } 1490 1491 1492 /* Set root hub status */ 1493 static void ohci_set_hub_status(OHCIState *ohci, uint32_t val) 1494 { 1495 uint32_t old_state; 1496 1497 old_state = ohci->rhstatus; 1498 1499 /* write 1 to clear OCIC */ 1500 if (val & OHCI_RHS_OCIC) 1501 ohci->rhstatus &= ~OHCI_RHS_OCIC; 1502 1503 if (val & OHCI_RHS_LPS) { 1504 int i; 1505 1506 for (i = 0; i < ohci->num_ports; i++) 1507 ohci_port_power(ohci, i, 0); 1508 DPRINTF("usb-ohci: powered down all ports\n"); 1509 } 1510 1511 if (val & OHCI_RHS_LPSC) { 1512 int i; 1513 1514 for (i = 0; i < ohci->num_ports; i++) 1515 ohci_port_power(ohci, i, 1); 1516 DPRINTF("usb-ohci: powered up all ports\n"); 1517 } 1518 1519 if (val & OHCI_RHS_DRWE) 1520 ohci->rhstatus |= OHCI_RHS_DRWE; 1521 1522 if (val & OHCI_RHS_CRWE) 1523 ohci->rhstatus &= ~OHCI_RHS_DRWE; 1524 1525 if (old_state != ohci->rhstatus) 1526 ohci_set_interrupt(ohci, OHCI_INTR_RHSC); 1527 } 1528 1529 /* Set root hub port status */ 1530 static void ohci_port_set_status(OHCIState *ohci, int portnum, uint32_t val) 1531 { 1532 uint32_t old_state; 1533 OHCIPort *port; 1534 1535 port = &ohci->rhport[portnum]; 1536 old_state = port->ctrl; 1537 1538 /* Write to clear CSC, PESC, PSSC, OCIC, PRSC */ 1539 if (val & OHCI_PORT_WTC) 1540 port->ctrl &= ~(val & OHCI_PORT_WTC); 1541 1542 if (val & OHCI_PORT_CCS) 1543 port->ctrl &= ~OHCI_PORT_PES; 1544 1545 ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PES); 1546 1547 if (ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PSS)) { 1548 DPRINTF("usb-ohci: port %d: SUSPEND\n", portnum); 1549 } 1550 1551 if (ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PRS)) { 1552 DPRINTF("usb-ohci: port %d: RESET\n", portnum); 1553 usb_device_reset(port->port.dev); 1554 port->ctrl &= ~OHCI_PORT_PRS; 1555 /* ??? Should this also set OHCI_PORT_PESC. */ 1556 port->ctrl |= OHCI_PORT_PES | OHCI_PORT_PRSC; 1557 } 1558 1559 /* Invert order here to ensure in ambiguous case, device is 1560 * powered up... 1561 */ 1562 if (val & OHCI_PORT_LSDA) 1563 ohci_port_power(ohci, portnum, 0); 1564 if (val & OHCI_PORT_PPS) 1565 ohci_port_power(ohci, portnum, 1); 1566 1567 if (old_state != port->ctrl) 1568 ohci_set_interrupt(ohci, OHCI_INTR_RHSC); 1569 } 1570 1571 static uint64_t ohci_mem_read(void *opaque, 1572 hwaddr addr, 1573 unsigned size) 1574 { 1575 OHCIState *ohci = opaque; 1576 uint32_t retval; 1577 1578 /* Only aligned reads are allowed on OHCI */ 1579 if (addr & 3) { 1580 fprintf(stderr, "usb-ohci: Mis-aligned read\n"); 1581 return 0xffffffff; 1582 } else if (addr >= 0x54 && addr < 0x54 + ohci->num_ports * 4) { 1583 /* HcRhPortStatus */ 1584 retval = ohci->rhport[(addr - 0x54) >> 2].ctrl | OHCI_PORT_PPS; 1585 } else { 1586 switch (addr >> 2) { 1587 case 0: /* HcRevision */ 1588 retval = 0x10; 1589 break; 1590 1591 case 1: /* HcControl */ 1592 retval = ohci->ctl; 1593 break; 1594 1595 case 2: /* HcCommandStatus */ 1596 retval = ohci->status; 1597 break; 1598 1599 case 3: /* HcInterruptStatus */ 1600 retval = ohci->intr_status; 1601 break; 1602 1603 case 4: /* HcInterruptEnable */ 1604 case 5: /* HcInterruptDisable */ 1605 retval = ohci->intr; 1606 break; 1607 1608 case 6: /* HcHCCA */ 1609 retval = ohci->hcca; 1610 break; 1611 1612 case 7: /* HcPeriodCurrentED */ 1613 retval = ohci->per_cur; 1614 break; 1615 1616 case 8: /* HcControlHeadED */ 1617 retval = ohci->ctrl_head; 1618 break; 1619 1620 case 9: /* HcControlCurrentED */ 1621 retval = ohci->ctrl_cur; 1622 break; 1623 1624 case 10: /* HcBulkHeadED */ 1625 retval = ohci->bulk_head; 1626 break; 1627 1628 case 11: /* HcBulkCurrentED */ 1629 retval = ohci->bulk_cur; 1630 break; 1631 1632 case 12: /* HcDoneHead */ 1633 retval = ohci->done; 1634 break; 1635 1636 case 13: /* HcFmInterretval */ 1637 retval = (ohci->fit << 31) | (ohci->fsmps << 16) | (ohci->fi); 1638 break; 1639 1640 case 14: /* HcFmRemaining */ 1641 retval = ohci_get_frame_remaining(ohci); 1642 break; 1643 1644 case 15: /* HcFmNumber */ 1645 retval = ohci->frame_number; 1646 break; 1647 1648 case 16: /* HcPeriodicStart */ 1649 retval = ohci->pstart; 1650 break; 1651 1652 case 17: /* HcLSThreshold */ 1653 retval = ohci->lst; 1654 break; 1655 1656 case 18: /* HcRhDescriptorA */ 1657 retval = ohci->rhdesc_a; 1658 break; 1659 1660 case 19: /* HcRhDescriptorB */ 1661 retval = ohci->rhdesc_b; 1662 break; 1663 1664 case 20: /* HcRhStatus */ 1665 retval = ohci->rhstatus; 1666 break; 1667 1668 /* PXA27x specific registers */ 1669 case 24: /* HcStatus */ 1670 retval = ohci->hstatus & ohci->hmask; 1671 break; 1672 1673 case 25: /* HcHReset */ 1674 retval = ohci->hreset; 1675 break; 1676 1677 case 26: /* HcHInterruptEnable */ 1678 retval = ohci->hmask; 1679 break; 1680 1681 case 27: /* HcHInterruptTest */ 1682 retval = ohci->htest; 1683 break; 1684 1685 default: 1686 fprintf(stderr, "ohci_read: Bad offset %x\n", (int)addr); 1687 retval = 0xffffffff; 1688 } 1689 } 1690 1691 return retval; 1692 } 1693 1694 static void ohci_mem_write(void *opaque, 1695 hwaddr addr, 1696 uint64_t val, 1697 unsigned size) 1698 { 1699 OHCIState *ohci = opaque; 1700 1701 /* Only aligned reads are allowed on OHCI */ 1702 if (addr & 3) { 1703 fprintf(stderr, "usb-ohci: Mis-aligned write\n"); 1704 return; 1705 } 1706 1707 if (addr >= 0x54 && addr < 0x54 + ohci->num_ports * 4) { 1708 /* HcRhPortStatus */ 1709 ohci_port_set_status(ohci, (addr - 0x54) >> 2, val); 1710 return; 1711 } 1712 1713 switch (addr >> 2) { 1714 case 1: /* HcControl */ 1715 ohci_set_ctl(ohci, val); 1716 break; 1717 1718 case 2: /* HcCommandStatus */ 1719 /* SOC is read-only */ 1720 val = (val & ~OHCI_STATUS_SOC); 1721 1722 /* Bits written as '0' remain unchanged in the register */ 1723 ohci->status |= val; 1724 1725 if (ohci->status & OHCI_STATUS_HCR) 1726 ohci_reset(ohci); 1727 break; 1728 1729 case 3: /* HcInterruptStatus */ 1730 ohci->intr_status &= ~val; 1731 ohci_intr_update(ohci); 1732 break; 1733 1734 case 4: /* HcInterruptEnable */ 1735 ohci->intr |= val; 1736 ohci_intr_update(ohci); 1737 break; 1738 1739 case 5: /* HcInterruptDisable */ 1740 ohci->intr &= ~val; 1741 ohci_intr_update(ohci); 1742 break; 1743 1744 case 6: /* HcHCCA */ 1745 ohci->hcca = val & OHCI_HCCA_MASK; 1746 break; 1747 1748 case 7: /* HcPeriodCurrentED */ 1749 /* Ignore writes to this read-only register, Linux does them */ 1750 break; 1751 1752 case 8: /* HcControlHeadED */ 1753 ohci->ctrl_head = val & OHCI_EDPTR_MASK; 1754 break; 1755 1756 case 9: /* HcControlCurrentED */ 1757 ohci->ctrl_cur = val & OHCI_EDPTR_MASK; 1758 break; 1759 1760 case 10: /* HcBulkHeadED */ 1761 ohci->bulk_head = val & OHCI_EDPTR_MASK; 1762 break; 1763 1764 case 11: /* HcBulkCurrentED */ 1765 ohci->bulk_cur = val & OHCI_EDPTR_MASK; 1766 break; 1767 1768 case 13: /* HcFmInterval */ 1769 ohci->fsmps = (val & OHCI_FMI_FSMPS) >> 16; 1770 ohci->fit = (val & OHCI_FMI_FIT) >> 31; 1771 ohci_set_frame_interval(ohci, val); 1772 break; 1773 1774 case 15: /* HcFmNumber */ 1775 break; 1776 1777 case 16: /* HcPeriodicStart */ 1778 ohci->pstart = val & 0xffff; 1779 break; 1780 1781 case 17: /* HcLSThreshold */ 1782 ohci->lst = val & 0xffff; 1783 break; 1784 1785 case 18: /* HcRhDescriptorA */ 1786 ohci->rhdesc_a &= ~OHCI_RHA_RW_MASK; 1787 ohci->rhdesc_a |= val & OHCI_RHA_RW_MASK; 1788 break; 1789 1790 case 19: /* HcRhDescriptorB */ 1791 break; 1792 1793 case 20: /* HcRhStatus */ 1794 ohci_set_hub_status(ohci, val); 1795 break; 1796 1797 /* PXA27x specific registers */ 1798 case 24: /* HcStatus */ 1799 ohci->hstatus &= ~(val & ohci->hmask); 1800 break; 1801 1802 case 25: /* HcHReset */ 1803 ohci->hreset = val & ~OHCI_HRESET_FSBIR; 1804 if (val & OHCI_HRESET_FSBIR) 1805 ohci_reset(ohci); 1806 break; 1807 1808 case 26: /* HcHInterruptEnable */ 1809 ohci->hmask = val; 1810 break; 1811 1812 case 27: /* HcHInterruptTest */ 1813 ohci->htest = val; 1814 break; 1815 1816 default: 1817 fprintf(stderr, "ohci_write: Bad offset %x\n", (int)addr); 1818 break; 1819 } 1820 } 1821 1822 static void ohci_async_cancel_device(OHCIState *ohci, USBDevice *dev) 1823 { 1824 if (ohci->async_td && 1825 usb_packet_is_inflight(&ohci->usb_packet) && 1826 ohci->usb_packet.ep->dev == dev) { 1827 usb_cancel_packet(&ohci->usb_packet); 1828 ohci->async_td = 0; 1829 } 1830 } 1831 1832 static const MemoryRegionOps ohci_mem_ops = { 1833 .read = ohci_mem_read, 1834 .write = ohci_mem_write, 1835 .endianness = DEVICE_LITTLE_ENDIAN, 1836 }; 1837 1838 static USBPortOps ohci_port_ops = { 1839 .attach = ohci_attach, 1840 .detach = ohci_detach, 1841 .child_detach = ohci_child_detach, 1842 .wakeup = ohci_wakeup, 1843 .complete = ohci_async_complete_packet, 1844 }; 1845 1846 static USBBusOps ohci_bus_ops = { 1847 }; 1848 1849 static int usb_ohci_init(OHCIState *ohci, DeviceState *dev, 1850 int num_ports, dma_addr_t localmem_base, 1851 char *masterbus, uint32_t firstport, 1852 AddressSpace *as) 1853 { 1854 int i; 1855 1856 ohci->as = as; 1857 1858 if (usb_frame_time == 0) { 1859 #ifdef OHCI_TIME_WARP 1860 usb_frame_time = get_ticks_per_sec(); 1861 usb_bit_time = muldiv64(1, get_ticks_per_sec(), USB_HZ/1000); 1862 #else 1863 usb_frame_time = muldiv64(1, get_ticks_per_sec(), 1000); 1864 if (get_ticks_per_sec() >= USB_HZ) { 1865 usb_bit_time = muldiv64(1, get_ticks_per_sec(), USB_HZ); 1866 } else { 1867 usb_bit_time = 1; 1868 } 1869 #endif 1870 DPRINTF("usb-ohci: usb_bit_time=%" PRId64 " usb_frame_time=%" PRId64 "\n", 1871 usb_frame_time, usb_bit_time); 1872 } 1873 1874 ohci->num_ports = num_ports; 1875 if (masterbus) { 1876 USBPort *ports[OHCI_MAX_PORTS]; 1877 for(i = 0; i < num_ports; i++) { 1878 ports[i] = &ohci->rhport[i].port; 1879 } 1880 if (usb_register_companion(masterbus, ports, num_ports, 1881 firstport, ohci, &ohci_port_ops, 1882 USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL) != 0) { 1883 return -1; 1884 } 1885 } else { 1886 usb_bus_new(&ohci->bus, sizeof(ohci->bus), &ohci_bus_ops, dev); 1887 for (i = 0; i < num_ports; i++) { 1888 usb_register_port(&ohci->bus, &ohci->rhport[i].port, 1889 ohci, i, &ohci_port_ops, 1890 USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL); 1891 } 1892 } 1893 1894 memory_region_init_io(&ohci->mem, OBJECT(dev), &ohci_mem_ops, 1895 ohci, "ohci", 256); 1896 ohci->localmem_base = localmem_base; 1897 1898 ohci->name = object_get_typename(OBJECT(dev)); 1899 usb_packet_init(&ohci->usb_packet); 1900 1901 ohci->async_td = 0; 1902 qemu_register_reset(ohci_reset, ohci); 1903 1904 return 0; 1905 } 1906 1907 #define TYPE_PCI_OHCI "pci-ohci" 1908 #define PCI_OHCI(obj) OBJECT_CHECK(OHCIPCIState, (obj), TYPE_PCI_OHCI) 1909 1910 typedef struct { 1911 /*< private >*/ 1912 PCIDevice parent_obj; 1913 /*< public >*/ 1914 1915 OHCIState state; 1916 char *masterbus; 1917 uint32_t num_ports; 1918 uint32_t firstport; 1919 } OHCIPCIState; 1920 1921 /** A typical O/EHCI will stop operating, set itself into error state 1922 * (which can be queried by MMIO) and will set PERR in its config 1923 * space to signal that it got an error 1924 */ 1925 static void ohci_die(OHCIState *ohci) 1926 { 1927 OHCIPCIState *dev = container_of(ohci, OHCIPCIState, state); 1928 1929 fprintf(stderr, "%s: DMA error\n", __func__); 1930 1931 ohci_set_interrupt(ohci, OHCI_INTR_UE); 1932 ohci_bus_stop(ohci); 1933 pci_set_word(dev->parent_obj.config + PCI_STATUS, 1934 PCI_STATUS_DETECTED_PARITY); 1935 } 1936 1937 static int usb_ohci_initfn_pci(PCIDevice *dev) 1938 { 1939 OHCIPCIState *ohci = PCI_OHCI(dev); 1940 1941 dev->config[PCI_CLASS_PROG] = 0x10; /* OHCI */ 1942 dev->config[PCI_INTERRUPT_PIN] = 0x01; /* interrupt pin A */ 1943 1944 if (usb_ohci_init(&ohci->state, DEVICE(dev), ohci->num_ports, 0, 1945 ohci->masterbus, ohci->firstport, 1946 pci_get_address_space(dev)) != 0) { 1947 return -1; 1948 } 1949 ohci->state.irq = pci_allocate_irq(dev); 1950 1951 pci_register_bar(dev, 0, 0, &ohci->state.mem); 1952 return 0; 1953 } 1954 1955 #define TYPE_SYSBUS_OHCI "sysbus-ohci" 1956 #define SYSBUS_OHCI(obj) OBJECT_CHECK(OHCISysBusState, (obj), TYPE_SYSBUS_OHCI) 1957 1958 typedef struct { 1959 /*< private >*/ 1960 SysBusDevice parent_obj; 1961 /*< public >*/ 1962 1963 OHCIState ohci; 1964 uint32_t num_ports; 1965 dma_addr_t dma_offset; 1966 } OHCISysBusState; 1967 1968 static void ohci_realize_pxa(DeviceState *dev, Error **errp) 1969 { 1970 OHCISysBusState *s = SYSBUS_OHCI(dev); 1971 SysBusDevice *sbd = SYS_BUS_DEVICE(dev); 1972 1973 /* Cannot fail as we pass NULL for masterbus */ 1974 usb_ohci_init(&s->ohci, dev, s->num_ports, s->dma_offset, NULL, 0, 1975 &address_space_memory); 1976 sysbus_init_irq(sbd, &s->ohci.irq); 1977 sysbus_init_mmio(sbd, &s->ohci.mem); 1978 } 1979 1980 static Property ohci_pci_properties[] = { 1981 DEFINE_PROP_STRING("masterbus", OHCIPCIState, masterbus), 1982 DEFINE_PROP_UINT32("num-ports", OHCIPCIState, num_ports, 3), 1983 DEFINE_PROP_UINT32("firstport", OHCIPCIState, firstport, 0), 1984 DEFINE_PROP_END_OF_LIST(), 1985 }; 1986 1987 static void ohci_pci_class_init(ObjectClass *klass, void *data) 1988 { 1989 DeviceClass *dc = DEVICE_CLASS(klass); 1990 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 1991 1992 k->init = usb_ohci_initfn_pci; 1993 k->vendor_id = PCI_VENDOR_ID_APPLE; 1994 k->device_id = PCI_DEVICE_ID_APPLE_IPID_USB; 1995 k->class_id = PCI_CLASS_SERIAL_USB; 1996 k->no_hotplug = 1; 1997 set_bit(DEVICE_CATEGORY_USB, dc->categories); 1998 dc->desc = "Apple USB Controller"; 1999 dc->props = ohci_pci_properties; 2000 } 2001 2002 static const TypeInfo ohci_pci_info = { 2003 .name = TYPE_PCI_OHCI, 2004 .parent = TYPE_PCI_DEVICE, 2005 .instance_size = sizeof(OHCIPCIState), 2006 .class_init = ohci_pci_class_init, 2007 }; 2008 2009 static Property ohci_sysbus_properties[] = { 2010 DEFINE_PROP_UINT32("num-ports", OHCISysBusState, num_ports, 3), 2011 DEFINE_PROP_DMAADDR("dma-offset", OHCISysBusState, dma_offset, 3), 2012 DEFINE_PROP_END_OF_LIST(), 2013 }; 2014 2015 static void ohci_sysbus_class_init(ObjectClass *klass, void *data) 2016 { 2017 DeviceClass *dc = DEVICE_CLASS(klass); 2018 2019 dc->realize = ohci_realize_pxa; 2020 set_bit(DEVICE_CATEGORY_USB, dc->categories); 2021 dc->desc = "OHCI USB Controller"; 2022 dc->props = ohci_sysbus_properties; 2023 } 2024 2025 static const TypeInfo ohci_sysbus_info = { 2026 .name = TYPE_SYSBUS_OHCI, 2027 .parent = TYPE_SYS_BUS_DEVICE, 2028 .instance_size = sizeof(OHCISysBusState), 2029 .class_init = ohci_sysbus_class_init, 2030 }; 2031 2032 static void ohci_register_types(void) 2033 { 2034 type_register_static(&ohci_pci_info); 2035 type_register_static(&ohci_sysbus_info); 2036 } 2037 2038 type_init(ohci_register_types) 2039