xref: /openbmc/qemu/hw/usb/hcd-dwc2.c (revision 7acafcfa)
1 /*
2  * dwc-hsotg (dwc2) USB host controller emulation
3  *
4  * Based on hw/usb/hcd-ehci.c and hw/usb/hcd-ohci.c
5  *
6  * Note that to use this emulation with the dwc-otg driver in the
7  * Raspbian kernel, you must pass the option "dwc_otg.fiq_fsm_enable=0"
8  * on the kernel command line.
9  *
10  * Some useful documentation used to develop this emulation can be
11  * found online (as of April 2020) at:
12  *
13  * http://www.capital-micro.com/PDF/CME-M7_Family_User_Guide_EN.pdf
14  * which has a pretty complete description of the controller starting
15  * on page 370.
16  *
17  * https://sourceforge.net/p/wive-ng/wive-ng-mt/ci/master/tree/docs/DataSheets/RT3050_5x_V2.0_081408_0902.pdf
18  * which has a description of the controller registers starting on
19  * page 130.
20  *
21  * Copyright (c) 2020 Paul Zimmerman <pauldzim@gmail.com>
22  *
23  * This program is free software; you can redistribute it and/or modify
24  * it under the terms of the GNU General Public License as published by
25  * the Free Software Foundation; either version 2 of the License, or
26  * (at your option) any later version.
27  *
28  * This program is distributed in the hope that it will be useful,
29  * but WITHOUT ANY WARRANTY; without even the implied warranty of
30  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
31  * GNU General Public License for more details.
32  */
33 
34 #include "qemu/osdep.h"
35 #include "qemu/units.h"
36 #include "qapi/error.h"
37 #include "hw/usb/dwc2-regs.h"
38 #include "hw/usb/hcd-dwc2.h"
39 #include "migration/vmstate.h"
40 #include "trace.h"
41 #include "qemu/log.h"
42 #include "qemu/error-report.h"
43 #include "qemu/main-loop.h"
44 #include "hw/qdev-properties.h"
45 
46 #define USB_HZ_FS       12000000
47 #define USB_HZ_HS       96000000
48 #define USB_FRMINTVL    12000
49 
50 /* nifty macros from Arnon's EHCI version  */
51 #define get_field(data, field) \
52     (((data) & field##_MASK) >> field##_SHIFT)
53 
54 #define set_field(data, newval, field) do { \
55     uint32_t val = *(data); \
56     val &= ~field##_MASK; \
57     val |= ((newval) << field##_SHIFT) & field##_MASK; \
58     *(data) = val; \
59 } while (0)
60 
61 #define get_bit(data, bitmask) \
62     (!!((data) & (bitmask)))
63 
64 /* update irq line */
65 static inline void dwc2_update_irq(DWC2State *s)
66 {
67     static int oldlevel;
68     int level = 0;
69 
70     if ((s->gintsts & s->gintmsk) && (s->gahbcfg & GAHBCFG_GLBL_INTR_EN)) {
71         level = 1;
72     }
73     if (level != oldlevel) {
74         oldlevel = level;
75         trace_usb_dwc2_update_irq(level);
76         qemu_set_irq(s->irq, level);
77     }
78 }
79 
80 /* flag interrupt condition */
81 static inline void dwc2_raise_global_irq(DWC2State *s, uint32_t intr)
82 {
83     if (!(s->gintsts & intr)) {
84         s->gintsts |= intr;
85         trace_usb_dwc2_raise_global_irq(intr);
86         dwc2_update_irq(s);
87     }
88 }
89 
90 static inline void dwc2_lower_global_irq(DWC2State *s, uint32_t intr)
91 {
92     if (s->gintsts & intr) {
93         s->gintsts &= ~intr;
94         trace_usb_dwc2_lower_global_irq(intr);
95         dwc2_update_irq(s);
96     }
97 }
98 
99 static inline void dwc2_raise_host_irq(DWC2State *s, uint32_t host_intr)
100 {
101     if (!(s->haint & host_intr)) {
102         s->haint |= host_intr;
103         s->haint &= 0xffff;
104         trace_usb_dwc2_raise_host_irq(host_intr);
105         if (s->haint & s->haintmsk) {
106             dwc2_raise_global_irq(s, GINTSTS_HCHINT);
107         }
108     }
109 }
110 
111 static inline void dwc2_lower_host_irq(DWC2State *s, uint32_t host_intr)
112 {
113     if (s->haint & host_intr) {
114         s->haint &= ~host_intr;
115         trace_usb_dwc2_lower_host_irq(host_intr);
116         if (!(s->haint & s->haintmsk)) {
117             dwc2_lower_global_irq(s, GINTSTS_HCHINT);
118         }
119     }
120 }
121 
122 static inline void dwc2_update_hc_irq(DWC2State *s, int index)
123 {
124     uint32_t host_intr = 1 << (index >> 3);
125 
126     if (s->hreg1[index + 2] & s->hreg1[index + 3]) {
127         dwc2_raise_host_irq(s, host_intr);
128     } else {
129         dwc2_lower_host_irq(s, host_intr);
130     }
131 }
132 
133 /* set a timer for EOF */
134 static void dwc2_eof_timer(DWC2State *s)
135 {
136     timer_mod(s->eof_timer, s->sof_time + s->usb_frame_time);
137 }
138 
139 /* Set a timer for EOF and generate SOF event */
140 static void dwc2_sof(DWC2State *s)
141 {
142     s->sof_time += s->usb_frame_time;
143     trace_usb_dwc2_sof(s->sof_time);
144     dwc2_eof_timer(s);
145     dwc2_raise_global_irq(s, GINTSTS_SOF);
146 }
147 
148 /* Do frame processing on frame boundary */
149 static void dwc2_frame_boundary(void *opaque)
150 {
151     DWC2State *s = opaque;
152     int64_t now;
153     uint16_t frcnt;
154 
155     now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
156 
157     /* Frame boundary, so do EOF stuff here */
158 
159     /* Increment frame number */
160     frcnt = (uint16_t)((now - s->sof_time) / s->fi);
161     s->frame_number = (s->frame_number + frcnt) & 0xffff;
162     s->hfnum = s->frame_number & HFNUM_MAX_FRNUM;
163 
164     /* Do SOF stuff here */
165     dwc2_sof(s);
166 }
167 
168 /* Start sending SOF tokens on the USB bus */
169 static void dwc2_bus_start(DWC2State *s)
170 {
171     trace_usb_dwc2_bus_start();
172     s->sof_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
173     dwc2_eof_timer(s);
174 }
175 
176 /* Stop sending SOF tokens on the USB bus */
177 static void dwc2_bus_stop(DWC2State *s)
178 {
179     trace_usb_dwc2_bus_stop();
180     timer_del(s->eof_timer);
181 }
182 
183 static USBDevice *dwc2_find_device(DWC2State *s, uint8_t addr)
184 {
185     USBDevice *dev;
186 
187     trace_usb_dwc2_find_device(addr);
188 
189     if (!(s->hprt0 & HPRT0_ENA)) {
190         trace_usb_dwc2_port_disabled(0);
191     } else {
192         dev = usb_find_device(&s->uport, addr);
193         if (dev != NULL) {
194             trace_usb_dwc2_device_found(0);
195             return dev;
196         }
197     }
198 
199     trace_usb_dwc2_device_not_found();
200     return NULL;
201 }
202 
203 static const char *pstatus[] = {
204     "USB_RET_SUCCESS", "USB_RET_NODEV", "USB_RET_NAK", "USB_RET_STALL",
205     "USB_RET_BABBLE", "USB_RET_IOERROR", "USB_RET_ASYNC",
206     "USB_RET_ADD_TO_QUEUE", "USB_RET_REMOVE_FROM_QUEUE"
207 };
208 
209 static uint32_t pintr[] = {
210     HCINTMSK_XFERCOMPL, HCINTMSK_XACTERR, HCINTMSK_NAK, HCINTMSK_STALL,
211     HCINTMSK_BBLERR, HCINTMSK_XACTERR, HCINTMSK_XACTERR, HCINTMSK_XACTERR,
212     HCINTMSK_XACTERR
213 };
214 
215 static const char *types[] = {
216     "Ctrl", "Isoc", "Bulk", "Intr"
217 };
218 
219 static const char *dirs[] = {
220     "Out", "In"
221 };
222 
223 static void dwc2_handle_packet(DWC2State *s, uint32_t devadr, USBDevice *dev,
224                                USBEndpoint *ep, uint32_t index, bool send)
225 {
226     DWC2Packet *p;
227     uint32_t hcchar = s->hreg1[index];
228     uint32_t hctsiz = s->hreg1[index + 4];
229     uint32_t hcdma = s->hreg1[index + 5];
230     uint32_t chan, epnum, epdir, eptype, mps, pid, pcnt, len, tlen, intr = 0;
231     uint32_t tpcnt, stsidx, actual = 0;
232     bool do_intr = false, done = false;
233 
234     epnum = get_field(hcchar, HCCHAR_EPNUM);
235     epdir = get_bit(hcchar, HCCHAR_EPDIR);
236     eptype = get_field(hcchar, HCCHAR_EPTYPE);
237     mps = get_field(hcchar, HCCHAR_MPS);
238     pid = get_field(hctsiz, TSIZ_SC_MC_PID);
239     pcnt = get_field(hctsiz, TSIZ_PKTCNT);
240     len = get_field(hctsiz, TSIZ_XFERSIZE);
241     assert(len <= DWC2_MAX_XFER_SIZE);
242     chan = index >> 3;
243     p = &s->packet[chan];
244 
245     trace_usb_dwc2_handle_packet(chan, dev, &p->packet, epnum, types[eptype],
246                                  dirs[epdir], mps, len, pcnt);
247 
248     if (eptype == USB_ENDPOINT_XFER_CONTROL && pid == TSIZ_SC_MC_PID_SETUP) {
249         pid = USB_TOKEN_SETUP;
250     } else {
251         pid = epdir ? USB_TOKEN_IN : USB_TOKEN_OUT;
252     }
253 
254     if (send) {
255         tlen = len;
256         if (p->small) {
257             if (tlen > mps) {
258                 tlen = mps;
259             }
260         }
261 
262         if (pid != USB_TOKEN_IN) {
263             trace_usb_dwc2_memory_read(hcdma, tlen);
264             if (dma_memory_read(&s->dma_as, hcdma,
265                                 s->usb_buf[chan], tlen) != MEMTX_OK) {
266                 qemu_log_mask(LOG_GUEST_ERROR, "%s: dma_memory_read failed\n",
267                               __func__);
268             }
269         }
270 
271         usb_packet_init(&p->packet);
272         usb_packet_setup(&p->packet, pid, ep, 0, hcdma,
273                          pid != USB_TOKEN_IN, true);
274         usb_packet_addbuf(&p->packet, s->usb_buf[chan], tlen);
275         p->async = DWC2_ASYNC_NONE;
276         usb_handle_packet(dev, &p->packet);
277     } else {
278         tlen = p->len;
279     }
280 
281     stsidx = -p->packet.status;
282     assert(stsidx < sizeof(pstatus) / sizeof(*pstatus));
283     actual = p->packet.actual_length;
284     trace_usb_dwc2_packet_status(pstatus[stsidx], actual);
285 
286 babble:
287     if (p->packet.status != USB_RET_SUCCESS &&
288             p->packet.status != USB_RET_NAK &&
289             p->packet.status != USB_RET_STALL &&
290             p->packet.status != USB_RET_ASYNC) {
291         trace_usb_dwc2_packet_error(pstatus[stsidx]);
292     }
293 
294     if (p->packet.status == USB_RET_ASYNC) {
295         trace_usb_dwc2_async_packet(&p->packet, chan, dev, epnum,
296                                     dirs[epdir], tlen);
297         usb_device_flush_ep_queue(dev, ep);
298         assert(p->async != DWC2_ASYNC_INFLIGHT);
299         p->devadr = devadr;
300         p->epnum = epnum;
301         p->epdir = epdir;
302         p->mps = mps;
303         p->pid = pid;
304         p->index = index;
305         p->pcnt = pcnt;
306         p->len = tlen;
307         p->async = DWC2_ASYNC_INFLIGHT;
308         p->needs_service = false;
309         return;
310     }
311 
312     if (p->packet.status == USB_RET_SUCCESS) {
313         if (actual > tlen) {
314             p->packet.status = USB_RET_BABBLE;
315             goto babble;
316         }
317 
318         if (pid == USB_TOKEN_IN) {
319             trace_usb_dwc2_memory_write(hcdma, actual);
320             if (dma_memory_write(&s->dma_as, hcdma, s->usb_buf[chan],
321                                  actual) != MEMTX_OK) {
322                 qemu_log_mask(LOG_GUEST_ERROR, "%s: dma_memory_write failed\n",
323                               __func__);
324             }
325         }
326 
327         tpcnt = actual / mps;
328         if (actual % mps) {
329             tpcnt++;
330             if (pid == USB_TOKEN_IN) {
331                 done = true;
332             }
333         }
334 
335         pcnt -= tpcnt < pcnt ? tpcnt : pcnt;
336         set_field(&hctsiz, pcnt, TSIZ_PKTCNT);
337         len -= actual < len ? actual : len;
338         set_field(&hctsiz, len, TSIZ_XFERSIZE);
339         s->hreg1[index + 4] = hctsiz;
340         hcdma += actual;
341         s->hreg1[index + 5] = hcdma;
342 
343         if (!pcnt || len == 0 || actual == 0) {
344             done = true;
345         }
346     } else {
347         intr |= pintr[stsidx];
348         if (p->packet.status == USB_RET_NAK &&
349             (eptype == USB_ENDPOINT_XFER_CONTROL ||
350              eptype == USB_ENDPOINT_XFER_BULK)) {
351             /*
352              * for ctrl/bulk, automatically retry on NAK,
353              * but send the interrupt anyway
354              */
355             intr &= ~HCINTMSK_RESERVED14_31;
356             s->hreg1[index + 2] |= intr;
357             do_intr = true;
358         } else {
359             intr |= HCINTMSK_CHHLTD;
360             done = true;
361         }
362     }
363 
364     usb_packet_cleanup(&p->packet);
365 
366     if (done) {
367         hcchar &= ~HCCHAR_CHENA;
368         s->hreg1[index] = hcchar;
369         if (!(intr & HCINTMSK_CHHLTD)) {
370             intr |= HCINTMSK_CHHLTD | HCINTMSK_XFERCOMPL;
371         }
372         intr &= ~HCINTMSK_RESERVED14_31;
373         s->hreg1[index + 2] |= intr;
374         p->needs_service = false;
375         trace_usb_dwc2_packet_done(pstatus[stsidx], actual, len, pcnt);
376         dwc2_update_hc_irq(s, index);
377         return;
378     }
379 
380     p->devadr = devadr;
381     p->epnum = epnum;
382     p->epdir = epdir;
383     p->mps = mps;
384     p->pid = pid;
385     p->index = index;
386     p->pcnt = pcnt;
387     p->len = len;
388     p->needs_service = true;
389     trace_usb_dwc2_packet_next(pstatus[stsidx], len, pcnt);
390     if (do_intr) {
391         dwc2_update_hc_irq(s, index);
392     }
393 }
394 
395 /* Attach or detach a device on root hub */
396 
397 static const char *speeds[] = {
398     "low", "full", "high"
399 };
400 
401 static void dwc2_attach(USBPort *port)
402 {
403     DWC2State *s = port->opaque;
404     int hispd = 0;
405 
406     trace_usb_dwc2_attach(port);
407     assert(port->index == 0);
408 
409     if (!port->dev || !port->dev->attached) {
410         return;
411     }
412 
413     assert(port->dev->speed <= USB_SPEED_HIGH);
414     trace_usb_dwc2_attach_speed(speeds[port->dev->speed]);
415     s->hprt0 &= ~HPRT0_SPD_MASK;
416 
417     switch (port->dev->speed) {
418     case USB_SPEED_LOW:
419         s->hprt0 |= HPRT0_SPD_LOW_SPEED << HPRT0_SPD_SHIFT;
420         break;
421     case USB_SPEED_FULL:
422         s->hprt0 |= HPRT0_SPD_FULL_SPEED << HPRT0_SPD_SHIFT;
423         break;
424     case USB_SPEED_HIGH:
425         s->hprt0 |= HPRT0_SPD_HIGH_SPEED << HPRT0_SPD_SHIFT;
426         hispd = 1;
427         break;
428     }
429 
430     if (hispd) {
431         s->usb_frame_time = NANOSECONDS_PER_SECOND / 8000;        /* 125000 */
432         if (NANOSECONDS_PER_SECOND >= USB_HZ_HS) {
433             s->usb_bit_time = NANOSECONDS_PER_SECOND / USB_HZ_HS; /* 10.4 */
434         } else {
435             s->usb_bit_time = 1;
436         }
437     } else {
438         s->usb_frame_time = NANOSECONDS_PER_SECOND / 1000;        /* 1000000 */
439         if (NANOSECONDS_PER_SECOND >= USB_HZ_FS) {
440             s->usb_bit_time = NANOSECONDS_PER_SECOND / USB_HZ_FS; /* 83.3 */
441         } else {
442             s->usb_bit_time = 1;
443         }
444     }
445 
446     s->fi = USB_FRMINTVL - 1;
447     s->hprt0 |= HPRT0_CONNDET | HPRT0_CONNSTS;
448 
449     dwc2_bus_start(s);
450     dwc2_raise_global_irq(s, GINTSTS_PRTINT);
451 }
452 
453 static void dwc2_detach(USBPort *port)
454 {
455     DWC2State *s = port->opaque;
456 
457     trace_usb_dwc2_detach(port);
458     assert(port->index == 0);
459 
460     dwc2_bus_stop(s);
461 
462     s->hprt0 &= ~(HPRT0_SPD_MASK | HPRT0_SUSP | HPRT0_ENA | HPRT0_CONNSTS);
463     s->hprt0 |= HPRT0_CONNDET | HPRT0_ENACHG;
464 
465     dwc2_raise_global_irq(s, GINTSTS_PRTINT);
466 }
467 
468 static void dwc2_child_detach(USBPort *port, USBDevice *child)
469 {
470     trace_usb_dwc2_child_detach(port, child);
471     assert(port->index == 0);
472 }
473 
474 static void dwc2_wakeup(USBPort *port)
475 {
476     DWC2State *s = port->opaque;
477 
478     trace_usb_dwc2_wakeup(port);
479     assert(port->index == 0);
480 
481     if (s->hprt0 & HPRT0_SUSP) {
482         s->hprt0 |= HPRT0_RES;
483         dwc2_raise_global_irq(s, GINTSTS_PRTINT);
484     }
485 
486     qemu_bh_schedule(s->async_bh);
487 }
488 
489 static void dwc2_async_packet_complete(USBPort *port, USBPacket *packet)
490 {
491     DWC2State *s = port->opaque;
492     DWC2Packet *p;
493     USBDevice *dev;
494     USBEndpoint *ep;
495 
496     assert(port->index == 0);
497     p = container_of(packet, DWC2Packet, packet);
498     dev = dwc2_find_device(s, p->devadr);
499     ep = usb_ep_get(dev, p->pid, p->epnum);
500     trace_usb_dwc2_async_packet_complete(port, packet, p->index >> 3, dev,
501                                          p->epnum, dirs[p->epdir], p->len);
502     assert(p->async == DWC2_ASYNC_INFLIGHT);
503 
504     if (packet->status == USB_RET_REMOVE_FROM_QUEUE) {
505         usb_cancel_packet(packet);
506         usb_packet_cleanup(packet);
507         return;
508     }
509 
510     dwc2_handle_packet(s, p->devadr, dev, ep, p->index, false);
511 
512     p->async = DWC2_ASYNC_FINISHED;
513     qemu_bh_schedule(s->async_bh);
514 }
515 
516 static USBPortOps dwc2_port_ops = {
517     .attach = dwc2_attach,
518     .detach = dwc2_detach,
519     .child_detach = dwc2_child_detach,
520     .wakeup = dwc2_wakeup,
521     .complete = dwc2_async_packet_complete,
522 };
523 
524 static uint32_t dwc2_get_frame_remaining(DWC2State *s)
525 {
526     uint32_t fr = 0;
527     int64_t tks;
528 
529     tks = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) - s->sof_time;
530     if (tks < 0) {
531         tks = 0;
532     }
533 
534     /* avoid muldiv if possible */
535     if (tks >= s->usb_frame_time) {
536         goto out;
537     }
538     if (tks < s->usb_bit_time) {
539         fr = s->fi;
540         goto out;
541     }
542 
543     /* tks = number of ns since SOF, divided by 83 (fs) or 10 (hs) */
544     tks = tks / s->usb_bit_time;
545     if (tks >= (int64_t)s->fi) {
546         goto out;
547     }
548 
549     /* remaining = frame interval minus tks */
550     fr = (uint32_t)((int64_t)s->fi - tks);
551 
552 out:
553     return fr;
554 }
555 
556 static void dwc2_work_bh(void *opaque)
557 {
558     DWC2State *s = opaque;
559     DWC2Packet *p;
560     USBDevice *dev;
561     USBEndpoint *ep;
562     int64_t t_now, expire_time;
563     int chan;
564     bool found = false;
565 
566     trace_usb_dwc2_work_bh();
567     if (s->working) {
568         return;
569     }
570     s->working = true;
571 
572     t_now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
573     chan = s->next_chan;
574 
575     do {
576         p = &s->packet[chan];
577         if (p->needs_service) {
578             dev = dwc2_find_device(s, p->devadr);
579             ep = usb_ep_get(dev, p->pid, p->epnum);
580             trace_usb_dwc2_work_bh_service(s->next_chan, chan, dev, p->epnum);
581             dwc2_handle_packet(s, p->devadr, dev, ep, p->index, true);
582             found = true;
583         }
584         if (++chan == DWC2_NB_CHAN) {
585             chan = 0;
586         }
587         if (found) {
588             s->next_chan = chan;
589             trace_usb_dwc2_work_bh_next(chan);
590         }
591     } while (chan != s->next_chan);
592 
593     if (found) {
594         expire_time = t_now + NANOSECONDS_PER_SECOND / 4000;
595         timer_mod(s->frame_timer, expire_time);
596     }
597     s->working = false;
598 }
599 
600 static void dwc2_enable_chan(DWC2State *s,  uint32_t index)
601 {
602     USBDevice *dev;
603     USBEndpoint *ep;
604     uint32_t hcchar;
605     uint32_t hctsiz;
606     uint32_t devadr, epnum, epdir, eptype, pid, len;
607     DWC2Packet *p;
608 
609     assert((index >> 3) < DWC2_NB_CHAN);
610     p = &s->packet[index >> 3];
611     hcchar = s->hreg1[index];
612     hctsiz = s->hreg1[index + 4];
613     devadr = get_field(hcchar, HCCHAR_DEVADDR);
614     epnum = get_field(hcchar, HCCHAR_EPNUM);
615     epdir = get_bit(hcchar, HCCHAR_EPDIR);
616     eptype = get_field(hcchar, HCCHAR_EPTYPE);
617     pid = get_field(hctsiz, TSIZ_SC_MC_PID);
618     len = get_field(hctsiz, TSIZ_XFERSIZE);
619 
620     dev = dwc2_find_device(s, devadr);
621 
622     trace_usb_dwc2_enable_chan(index >> 3, dev, &p->packet, epnum);
623     if (dev == NULL) {
624         return;
625     }
626 
627     if (eptype == USB_ENDPOINT_XFER_CONTROL && pid == TSIZ_SC_MC_PID_SETUP) {
628         pid = USB_TOKEN_SETUP;
629     } else {
630         pid = epdir ? USB_TOKEN_IN : USB_TOKEN_OUT;
631     }
632 
633     ep = usb_ep_get(dev, pid, epnum);
634 
635     /*
636      * Hack: Networking doesn't like us delivering large transfers, it kind
637      * of works but the latency is horrible. So if the transfer is <= the mtu
638      * size, we take that as a hint that this might be a network transfer,
639      * and do the transfer packet-by-packet.
640      */
641     if (len > 1536) {
642         p->small = false;
643     } else {
644         p->small = true;
645     }
646 
647     dwc2_handle_packet(s, devadr, dev, ep, index, true);
648     qemu_bh_schedule(s->async_bh);
649 }
650 
651 static const char *glbregnm[] = {
652     "GOTGCTL  ", "GOTGINT  ", "GAHBCFG  ", "GUSBCFG  ", "GRSTCTL  ",
653     "GINTSTS  ", "GINTMSK  ", "GRXSTSR  ", "GRXSTSP  ", "GRXFSIZ  ",
654     "GNPTXFSIZ", "GNPTXSTS ", "GI2CCTL  ", "GPVNDCTL ", "GGPIO    ",
655     "GUID     ", "GSNPSID  ", "GHWCFG1  ", "GHWCFG2  ", "GHWCFG3  ",
656     "GHWCFG4  ", "GLPMCFG  ", "GPWRDN   ", "GDFIFOCFG", "GADPCTL  ",
657     "GREFCLK  ", "GINTMSK2 ", "GINTSTS2 "
658 };
659 
660 static uint64_t dwc2_glbreg_read(void *ptr, hwaddr addr, int index,
661                                  unsigned size)
662 {
663     DWC2State *s = ptr;
664     uint32_t val;
665 
666     assert(addr <= GINTSTS2);
667     val = s->glbreg[index];
668 
669     switch (addr) {
670     case GRSTCTL:
671         /* clear any self-clearing bits that were set */
672         val &= ~(GRSTCTL_TXFFLSH | GRSTCTL_RXFFLSH | GRSTCTL_IN_TKNQ_FLSH |
673                  GRSTCTL_FRMCNTRRST | GRSTCTL_HSFTRST | GRSTCTL_CSFTRST);
674         s->glbreg[index] = val;
675         break;
676     default:
677         break;
678     }
679 
680     trace_usb_dwc2_glbreg_read(addr, glbregnm[index], val);
681     return val;
682 }
683 
684 static void dwc2_glbreg_write(void *ptr, hwaddr addr, int index, uint64_t val,
685                               unsigned size)
686 {
687     DWC2State *s = ptr;
688     uint64_t orig = val;
689     uint32_t *mmio;
690     uint32_t old;
691     int iflg = 0;
692 
693     assert(addr <= GINTSTS2);
694     mmio = &s->glbreg[index];
695     old = *mmio;
696 
697     switch (addr) {
698     case GOTGCTL:
699         /* don't allow setting of read-only bits */
700         val &= ~(GOTGCTL_MULT_VALID_BC_MASK | GOTGCTL_BSESVLD |
701                  GOTGCTL_ASESVLD | GOTGCTL_DBNC_SHORT | GOTGCTL_CONID_B |
702                  GOTGCTL_HSTNEGSCS | GOTGCTL_SESREQSCS);
703         /* don't allow clearing of read-only bits */
704         val |= old & (GOTGCTL_MULT_VALID_BC_MASK | GOTGCTL_BSESVLD |
705                       GOTGCTL_ASESVLD | GOTGCTL_DBNC_SHORT | GOTGCTL_CONID_B |
706                       GOTGCTL_HSTNEGSCS | GOTGCTL_SESREQSCS);
707         break;
708     case GAHBCFG:
709         if ((val & GAHBCFG_GLBL_INTR_EN) && !(old & GAHBCFG_GLBL_INTR_EN)) {
710             iflg = 1;
711         }
712         break;
713     case GRSTCTL:
714         val |= GRSTCTL_AHBIDLE;
715         val &= ~GRSTCTL_DMAREQ;
716         if (!(old & GRSTCTL_TXFFLSH) && (val & GRSTCTL_TXFFLSH)) {
717                 /* TODO - TX fifo flush */
718             qemu_log_mask(LOG_UNIMP, "Tx FIFO flush not implemented\n");
719         }
720         if (!(old & GRSTCTL_RXFFLSH) && (val & GRSTCTL_RXFFLSH)) {
721                 /* TODO - RX fifo flush */
722             qemu_log_mask(LOG_UNIMP, "Rx FIFO flush not implemented\n");
723         }
724         if (!(old & GRSTCTL_IN_TKNQ_FLSH) && (val & GRSTCTL_IN_TKNQ_FLSH)) {
725                 /* TODO - device IN token queue flush */
726             qemu_log_mask(LOG_UNIMP, "Token queue flush not implemented\n");
727         }
728         if (!(old & GRSTCTL_FRMCNTRRST) && (val & GRSTCTL_FRMCNTRRST)) {
729                 /* TODO - host frame counter reset */
730             qemu_log_mask(LOG_UNIMP, "Frame counter reset not implemented\n");
731         }
732         if (!(old & GRSTCTL_HSFTRST) && (val & GRSTCTL_HSFTRST)) {
733                 /* TODO - host soft reset */
734             qemu_log_mask(LOG_UNIMP, "Host soft reset not implemented\n");
735         }
736         if (!(old & GRSTCTL_CSFTRST) && (val & GRSTCTL_CSFTRST)) {
737                 /* TODO - core soft reset */
738             qemu_log_mask(LOG_UNIMP, "Core soft reset not implemented\n");
739         }
740         /* don't allow clearing of self-clearing bits */
741         val |= old & (GRSTCTL_TXFFLSH | GRSTCTL_RXFFLSH |
742                       GRSTCTL_IN_TKNQ_FLSH | GRSTCTL_FRMCNTRRST |
743                       GRSTCTL_HSFTRST | GRSTCTL_CSFTRST);
744         break;
745     case GINTSTS:
746         /* clear the write-1-to-clear bits */
747         val |= ~old;
748         val = ~val;
749         /* don't allow clearing of read-only bits */
750         val |= old & (GINTSTS_PTXFEMP | GINTSTS_HCHINT | GINTSTS_PRTINT |
751                       GINTSTS_OEPINT | GINTSTS_IEPINT | GINTSTS_GOUTNAKEFF |
752                       GINTSTS_GINNAKEFF | GINTSTS_NPTXFEMP | GINTSTS_RXFLVL |
753                       GINTSTS_OTGINT | GINTSTS_CURMODE_HOST);
754         iflg = 1;
755         break;
756     case GINTMSK:
757         iflg = 1;
758         break;
759     default:
760         break;
761     }
762 
763     trace_usb_dwc2_glbreg_write(addr, glbregnm[index], orig, old, val);
764     *mmio = val;
765 
766     if (iflg) {
767         dwc2_update_irq(s);
768     }
769 }
770 
771 static uint64_t dwc2_fszreg_read(void *ptr, hwaddr addr, int index,
772                                  unsigned size)
773 {
774     DWC2State *s = ptr;
775     uint32_t val;
776 
777     assert(addr == HPTXFSIZ);
778     val = s->fszreg[index];
779 
780     trace_usb_dwc2_fszreg_read(addr, val);
781     return val;
782 }
783 
784 static void dwc2_fszreg_write(void *ptr, hwaddr addr, int index, uint64_t val,
785                               unsigned size)
786 {
787     DWC2State *s = ptr;
788     uint64_t orig = val;
789     uint32_t *mmio;
790     uint32_t old;
791 
792     assert(addr == HPTXFSIZ);
793     mmio = &s->fszreg[index];
794     old = *mmio;
795 
796     trace_usb_dwc2_fszreg_write(addr, orig, old, val);
797     *mmio = val;
798 }
799 
800 static const char *hreg0nm[] = {
801     "HCFG     ", "HFIR     ", "HFNUM    ", "<rsvd>   ", "HPTXSTS  ",
802     "HAINT    ", "HAINTMSK ", "HFLBADDR ", "<rsvd>   ", "<rsvd>   ",
803     "<rsvd>   ", "<rsvd>   ", "<rsvd>   ", "<rsvd>   ", "<rsvd>   ",
804     "<rsvd>   ", "HPRT0    "
805 };
806 
807 static uint64_t dwc2_hreg0_read(void *ptr, hwaddr addr, int index,
808                                 unsigned size)
809 {
810     DWC2State *s = ptr;
811     uint32_t val;
812 
813     assert(addr >= HCFG && addr <= HPRT0);
814     val = s->hreg0[index];
815 
816     switch (addr) {
817     case HFNUM:
818         val = (dwc2_get_frame_remaining(s) << HFNUM_FRREM_SHIFT) |
819               (s->hfnum << HFNUM_FRNUM_SHIFT);
820         break;
821     default:
822         break;
823     }
824 
825     trace_usb_dwc2_hreg0_read(addr, hreg0nm[index], val);
826     return val;
827 }
828 
829 static void dwc2_hreg0_write(void *ptr, hwaddr addr, int index, uint64_t val,
830                              unsigned size)
831 {
832     DWC2State *s = ptr;
833     USBDevice *dev = s->uport.dev;
834     uint64_t orig = val;
835     uint32_t *mmio;
836     uint32_t tval, told, old;
837     int prst = 0;
838     int iflg = 0;
839 
840     assert(addr >= HCFG && addr <= HPRT0);
841     mmio = &s->hreg0[index];
842     old = *mmio;
843 
844     switch (addr) {
845     case HFIR:
846         break;
847     case HFNUM:
848     case HPTXSTS:
849     case HAINT:
850         qemu_log_mask(LOG_GUEST_ERROR, "%s: write to read-only register\n",
851                       __func__);
852         return;
853     case HAINTMSK:
854         val &= 0xffff;
855         break;
856     case HPRT0:
857         /* don't allow clearing of read-only bits */
858         val |= old & (HPRT0_SPD_MASK | HPRT0_LNSTS_MASK | HPRT0_OVRCURRACT |
859                       HPRT0_CONNSTS);
860         /* don't allow clearing of self-clearing bits */
861         val |= old & (HPRT0_SUSP | HPRT0_RES);
862         /* don't allow setting of self-setting bits */
863         if (!(old & HPRT0_ENA) && (val & HPRT0_ENA)) {
864             val &= ~HPRT0_ENA;
865         }
866         /* clear the write-1-to-clear bits */
867         tval = val & (HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_ENA |
868                       HPRT0_CONNDET);
869         told = old & (HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_ENA |
870                       HPRT0_CONNDET);
871         tval |= ~told;
872         tval = ~tval;
873         tval &= (HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_ENA |
874                  HPRT0_CONNDET);
875         val &= ~(HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_ENA |
876                  HPRT0_CONNDET);
877         val |= tval;
878         if (!(val & HPRT0_RST) && (old & HPRT0_RST)) {
879             if (dev && dev->attached) {
880                 val |= HPRT0_ENA | HPRT0_ENACHG;
881                 prst = 1;
882             }
883         }
884         if (val & (HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_CONNDET)) {
885             iflg = 1;
886         } else {
887             iflg = -1;
888         }
889         break;
890     default:
891         break;
892     }
893 
894     if (prst) {
895         trace_usb_dwc2_hreg0_write(addr, hreg0nm[index], orig, old,
896                                    val & ~HPRT0_CONNDET);
897         trace_usb_dwc2_hreg0_action("call usb_port_reset");
898         usb_port_reset(&s->uport);
899         val &= ~HPRT0_CONNDET;
900     } else {
901         trace_usb_dwc2_hreg0_write(addr, hreg0nm[index], orig, old, val);
902     }
903 
904     *mmio = val;
905 
906     if (iflg > 0) {
907         trace_usb_dwc2_hreg0_action("enable PRTINT");
908         dwc2_raise_global_irq(s, GINTSTS_PRTINT);
909     } else if (iflg < 0) {
910         trace_usb_dwc2_hreg0_action("disable PRTINT");
911         dwc2_lower_global_irq(s, GINTSTS_PRTINT);
912     }
913 }
914 
915 static const char *hreg1nm[] = {
916     "HCCHAR  ", "HCSPLT  ", "HCINT   ", "HCINTMSK", "HCTSIZ  ", "HCDMA   ",
917     "<rsvd>  ", "HCDMAB  "
918 };
919 
920 static uint64_t dwc2_hreg1_read(void *ptr, hwaddr addr, int index,
921                                 unsigned size)
922 {
923     DWC2State *s = ptr;
924     uint32_t val;
925 
926     assert(addr >= HCCHAR(0) && addr <= HCDMAB(DWC2_NB_CHAN - 1));
927     val = s->hreg1[index];
928 
929     trace_usb_dwc2_hreg1_read(addr, hreg1nm[index & 7], addr >> 5, val);
930     return val;
931 }
932 
933 static void dwc2_hreg1_write(void *ptr, hwaddr addr, int index, uint64_t val,
934                              unsigned size)
935 {
936     DWC2State *s = ptr;
937     uint64_t orig = val;
938     uint32_t *mmio;
939     uint32_t old;
940     int iflg = 0;
941     int enflg = 0;
942     int disflg = 0;
943 
944     assert(addr >= HCCHAR(0) && addr <= HCDMAB(DWC2_NB_CHAN - 1));
945     mmio = &s->hreg1[index];
946     old = *mmio;
947 
948     switch (HSOTG_REG(0x500) + (addr & 0x1c)) {
949     case HCCHAR(0):
950         if ((val & HCCHAR_CHDIS) && !(old & HCCHAR_CHDIS)) {
951             val &= ~(HCCHAR_CHENA | HCCHAR_CHDIS);
952             disflg = 1;
953         } else {
954             val |= old & HCCHAR_CHDIS;
955             if ((val & HCCHAR_CHENA) && !(old & HCCHAR_CHENA)) {
956                 val &= ~HCCHAR_CHDIS;
957                 enflg = 1;
958             } else {
959                 val |= old & HCCHAR_CHENA;
960             }
961         }
962         break;
963     case HCINT(0):
964         /* clear the write-1-to-clear bits */
965         val |= ~old;
966         val = ~val;
967         val &= ~HCINTMSK_RESERVED14_31;
968         iflg = 1;
969         break;
970     case HCINTMSK(0):
971         val &= ~HCINTMSK_RESERVED14_31;
972         iflg = 1;
973         break;
974     case HCDMAB(0):
975         qemu_log_mask(LOG_GUEST_ERROR, "%s: write to read-only register\n",
976                       __func__);
977         return;
978     default:
979         break;
980     }
981 
982     trace_usb_dwc2_hreg1_write(addr, hreg1nm[index & 7], index >> 3, orig,
983                                old, val);
984     *mmio = val;
985 
986     if (disflg) {
987         /* set ChHltd in HCINT */
988         s->hreg1[(index & ~7) + 2] |= HCINTMSK_CHHLTD;
989         iflg = 1;
990     }
991 
992     if (enflg) {
993         dwc2_enable_chan(s, index & ~7);
994     }
995 
996     if (iflg) {
997         dwc2_update_hc_irq(s, index & ~7);
998     }
999 }
1000 
1001 static const char *pcgregnm[] = {
1002         "PCGCTL   ", "PCGCCTL1 "
1003 };
1004 
1005 static uint64_t dwc2_pcgreg_read(void *ptr, hwaddr addr, int index,
1006                                  unsigned size)
1007 {
1008     DWC2State *s = ptr;
1009     uint32_t val;
1010 
1011     assert(addr >= PCGCTL && addr <= PCGCCTL1);
1012     val = s->pcgreg[index];
1013 
1014     trace_usb_dwc2_pcgreg_read(addr, pcgregnm[index], val);
1015     return val;
1016 }
1017 
1018 static void dwc2_pcgreg_write(void *ptr, hwaddr addr, int index,
1019                               uint64_t val, unsigned size)
1020 {
1021     DWC2State *s = ptr;
1022     uint64_t orig = val;
1023     uint32_t *mmio;
1024     uint32_t old;
1025 
1026     assert(addr >= PCGCTL && addr <= PCGCCTL1);
1027     mmio = &s->pcgreg[index];
1028     old = *mmio;
1029 
1030     trace_usb_dwc2_pcgreg_write(addr, pcgregnm[index], orig, old, val);
1031     *mmio = val;
1032 }
1033 
1034 static uint64_t dwc2_hsotg_read(void *ptr, hwaddr addr, unsigned size)
1035 {
1036     uint64_t val;
1037 
1038     switch (addr) {
1039     case HSOTG_REG(0x000) ... HSOTG_REG(0x0fc):
1040         val = dwc2_glbreg_read(ptr, addr, (addr - HSOTG_REG(0x000)) >> 2, size);
1041         break;
1042     case HSOTG_REG(0x100):
1043         val = dwc2_fszreg_read(ptr, addr, (addr - HSOTG_REG(0x100)) >> 2, size);
1044         break;
1045     case HSOTG_REG(0x104) ... HSOTG_REG(0x3fc):
1046         /* Gadget-mode registers, just return 0 for now */
1047         val = 0;
1048         break;
1049     case HSOTG_REG(0x400) ... HSOTG_REG(0x4fc):
1050         val = dwc2_hreg0_read(ptr, addr, (addr - HSOTG_REG(0x400)) >> 2, size);
1051         break;
1052     case HSOTG_REG(0x500) ... HSOTG_REG(0x7fc):
1053         val = dwc2_hreg1_read(ptr, addr, (addr - HSOTG_REG(0x500)) >> 2, size);
1054         break;
1055     case HSOTG_REG(0x800) ... HSOTG_REG(0xdfc):
1056         /* Gadget-mode registers, just return 0 for now */
1057         val = 0;
1058         break;
1059     case HSOTG_REG(0xe00) ... HSOTG_REG(0xffc):
1060         val = dwc2_pcgreg_read(ptr, addr, (addr - HSOTG_REG(0xe00)) >> 2, size);
1061         break;
1062     default:
1063         g_assert_not_reached();
1064     }
1065 
1066     return val;
1067 }
1068 
1069 static void dwc2_hsotg_write(void *ptr, hwaddr addr, uint64_t val,
1070                              unsigned size)
1071 {
1072     switch (addr) {
1073     case HSOTG_REG(0x000) ... HSOTG_REG(0x0fc):
1074         dwc2_glbreg_write(ptr, addr, (addr - HSOTG_REG(0x000)) >> 2, val, size);
1075         break;
1076     case HSOTG_REG(0x100):
1077         dwc2_fszreg_write(ptr, addr, (addr - HSOTG_REG(0x100)) >> 2, val, size);
1078         break;
1079     case HSOTG_REG(0x104) ... HSOTG_REG(0x3fc):
1080         /* Gadget-mode registers, do nothing for now */
1081         break;
1082     case HSOTG_REG(0x400) ... HSOTG_REG(0x4fc):
1083         dwc2_hreg0_write(ptr, addr, (addr - HSOTG_REG(0x400)) >> 2, val, size);
1084         break;
1085     case HSOTG_REG(0x500) ... HSOTG_REG(0x7fc):
1086         dwc2_hreg1_write(ptr, addr, (addr - HSOTG_REG(0x500)) >> 2, val, size);
1087         break;
1088     case HSOTG_REG(0x800) ... HSOTG_REG(0xdfc):
1089         /* Gadget-mode registers, do nothing for now */
1090         break;
1091     case HSOTG_REG(0xe00) ... HSOTG_REG(0xffc):
1092         dwc2_pcgreg_write(ptr, addr, (addr - HSOTG_REG(0xe00)) >> 2, val, size);
1093         break;
1094     default:
1095         g_assert_not_reached();
1096     }
1097 }
1098 
1099 static const MemoryRegionOps dwc2_mmio_hsotg_ops = {
1100     .read = dwc2_hsotg_read,
1101     .write = dwc2_hsotg_write,
1102     .impl.min_access_size = 4,
1103     .impl.max_access_size = 4,
1104     .endianness = DEVICE_LITTLE_ENDIAN,
1105 };
1106 
1107 static uint64_t dwc2_hreg2_read(void *ptr, hwaddr addr, unsigned size)
1108 {
1109     /* TODO - implement FIFOs to support slave mode */
1110     trace_usb_dwc2_hreg2_read(addr, addr >> 12, 0);
1111     qemu_log_mask(LOG_UNIMP, "FIFO read not implemented\n");
1112     return 0;
1113 }
1114 
1115 static void dwc2_hreg2_write(void *ptr, hwaddr addr, uint64_t val,
1116                              unsigned size)
1117 {
1118     uint64_t orig = val;
1119 
1120     /* TODO - implement FIFOs to support slave mode */
1121     trace_usb_dwc2_hreg2_write(addr, addr >> 12, orig, 0, val);
1122     qemu_log_mask(LOG_UNIMP, "FIFO write not implemented\n");
1123 }
1124 
1125 static const MemoryRegionOps dwc2_mmio_hreg2_ops = {
1126     .read = dwc2_hreg2_read,
1127     .write = dwc2_hreg2_write,
1128     .impl.min_access_size = 4,
1129     .impl.max_access_size = 4,
1130     .endianness = DEVICE_LITTLE_ENDIAN,
1131 };
1132 
1133 static void dwc2_wakeup_endpoint(USBBus *bus, USBEndpoint *ep,
1134                                  unsigned int stream)
1135 {
1136     DWC2State *s = container_of(bus, DWC2State, bus);
1137 
1138     trace_usb_dwc2_wakeup_endpoint(ep, stream);
1139 
1140     /* TODO - do something here? */
1141     qemu_bh_schedule(s->async_bh);
1142 }
1143 
1144 static USBBusOps dwc2_bus_ops = {
1145     .wakeup_endpoint = dwc2_wakeup_endpoint,
1146 };
1147 
1148 static void dwc2_work_timer(void *opaque)
1149 {
1150     DWC2State *s = opaque;
1151 
1152     trace_usb_dwc2_work_timer();
1153     qemu_bh_schedule(s->async_bh);
1154 }
1155 
1156 static void dwc2_reset_enter(Object *obj, ResetType type)
1157 {
1158     DWC2Class *c = DWC2_GET_CLASS(obj);
1159     DWC2State *s = DWC2_USB(obj);
1160     int i;
1161 
1162     trace_usb_dwc2_reset_enter();
1163 
1164     if (c->parent_phases.enter) {
1165         c->parent_phases.enter(obj, type);
1166     }
1167 
1168     timer_del(s->frame_timer);
1169     qemu_bh_cancel(s->async_bh);
1170 
1171     if (s->uport.dev && s->uport.dev->attached) {
1172         usb_detach(&s->uport);
1173     }
1174 
1175     dwc2_bus_stop(s);
1176 
1177     s->gotgctl = GOTGCTL_BSESVLD | GOTGCTL_ASESVLD | GOTGCTL_CONID_B;
1178     s->gotgint = 0;
1179     s->gahbcfg = 0;
1180     s->gusbcfg = 5 << GUSBCFG_USBTRDTIM_SHIFT;
1181     s->grstctl = GRSTCTL_AHBIDLE;
1182     s->gintsts = GINTSTS_CONIDSTSCHNG | GINTSTS_PTXFEMP | GINTSTS_NPTXFEMP |
1183                  GINTSTS_CURMODE_HOST;
1184     s->gintmsk = 0;
1185     s->grxstsr = 0;
1186     s->grxstsp = 0;
1187     s->grxfsiz = 1024;
1188     s->gnptxfsiz = 1024 << FIFOSIZE_DEPTH_SHIFT;
1189     s->gnptxsts = (4 << FIFOSIZE_DEPTH_SHIFT) | 1024;
1190     s->gi2cctl = GI2CCTL_I2CDATSE0 | GI2CCTL_ACK;
1191     s->gpvndctl = 0;
1192     s->ggpio = 0;
1193     s->guid = 0;
1194     s->gsnpsid = 0x4f54294a;
1195     s->ghwcfg1 = 0;
1196     s->ghwcfg2 = (8 << GHWCFG2_DEV_TOKEN_Q_DEPTH_SHIFT) |
1197                  (4 << GHWCFG2_HOST_PERIO_TX_Q_DEPTH_SHIFT) |
1198                  (4 << GHWCFG2_NONPERIO_TX_Q_DEPTH_SHIFT) |
1199                  GHWCFG2_DYNAMIC_FIFO |
1200                  GHWCFG2_PERIO_EP_SUPPORTED |
1201                  ((DWC2_NB_CHAN - 1) << GHWCFG2_NUM_HOST_CHAN_SHIFT) |
1202                  (GHWCFG2_INT_DMA_ARCH << GHWCFG2_ARCHITECTURE_SHIFT) |
1203                  (GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST << GHWCFG2_OP_MODE_SHIFT);
1204     s->ghwcfg3 = (4096 << GHWCFG3_DFIFO_DEPTH_SHIFT) |
1205                  (4 << GHWCFG3_PACKET_SIZE_CNTR_WIDTH_SHIFT) |
1206                  (4 << GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT);
1207     s->ghwcfg4 = 0;
1208     s->glpmcfg = 0;
1209     s->gpwrdn = GPWRDN_PWRDNRSTN;
1210     s->gdfifocfg = 0;
1211     s->gadpctl = 0;
1212     s->grefclk = 0;
1213     s->gintmsk2 = 0;
1214     s->gintsts2 = 0;
1215 
1216     s->hptxfsiz = 500 << FIFOSIZE_DEPTH_SHIFT;
1217 
1218     s->hcfg = 2 << HCFG_RESVALID_SHIFT;
1219     s->hfir = 60000;
1220     s->hfnum = 0x3fff;
1221     s->hptxsts = (16 << TXSTS_QSPCAVAIL_SHIFT) | 32768;
1222     s->haint = 0;
1223     s->haintmsk = 0;
1224     s->hprt0 = 0;
1225 
1226     memset(s->hreg1, 0, sizeof(s->hreg1));
1227     memset(s->pcgreg, 0, sizeof(s->pcgreg));
1228 
1229     s->sof_time = 0;
1230     s->frame_number = 0;
1231     s->fi = USB_FRMINTVL - 1;
1232     s->next_chan = 0;
1233     s->working = false;
1234 
1235     for (i = 0; i < DWC2_NB_CHAN; i++) {
1236         s->packet[i].needs_service = false;
1237     }
1238 }
1239 
1240 static void dwc2_reset_hold(Object *obj)
1241 {
1242     DWC2Class *c = DWC2_GET_CLASS(obj);
1243     DWC2State *s = DWC2_USB(obj);
1244 
1245     trace_usb_dwc2_reset_hold();
1246 
1247     if (c->parent_phases.hold) {
1248         c->parent_phases.hold(obj);
1249     }
1250 
1251     dwc2_update_irq(s);
1252 }
1253 
1254 static void dwc2_reset_exit(Object *obj)
1255 {
1256     DWC2Class *c = DWC2_GET_CLASS(obj);
1257     DWC2State *s = DWC2_USB(obj);
1258 
1259     trace_usb_dwc2_reset_exit();
1260 
1261     if (c->parent_phases.exit) {
1262         c->parent_phases.exit(obj);
1263     }
1264 
1265     s->hprt0 = HPRT0_PWR;
1266     if (s->uport.dev && s->uport.dev->attached) {
1267         usb_attach(&s->uport);
1268         usb_device_reset(s->uport.dev);
1269     }
1270 }
1271 
1272 static void dwc2_realize(DeviceState *dev, Error **errp)
1273 {
1274     SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
1275     DWC2State *s = DWC2_USB(dev);
1276     Object *obj;
1277 
1278     obj = object_property_get_link(OBJECT(dev), "dma-mr", &error_abort);
1279 
1280     s->dma_mr = MEMORY_REGION(obj);
1281     address_space_init(&s->dma_as, s->dma_mr, "dwc2");
1282 
1283     usb_bus_new(&s->bus, sizeof(s->bus), &dwc2_bus_ops, dev);
1284     usb_register_port(&s->bus, &s->uport, s, 0, &dwc2_port_ops,
1285                       USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL |
1286                       (s->usb_version == 2 ? USB_SPEED_MASK_HIGH : 0));
1287     s->uport.dev = 0;
1288 
1289     s->usb_frame_time = NANOSECONDS_PER_SECOND / 1000;          /* 1000000 */
1290     if (NANOSECONDS_PER_SECOND >= USB_HZ_FS) {
1291         s->usb_bit_time = NANOSECONDS_PER_SECOND / USB_HZ_FS;   /* 83.3 */
1292     } else {
1293         s->usb_bit_time = 1;
1294     }
1295 
1296     s->fi = USB_FRMINTVL - 1;
1297     s->eof_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, dwc2_frame_boundary, s);
1298     s->frame_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, dwc2_work_timer, s);
1299     s->async_bh = qemu_bh_new(dwc2_work_bh, s);
1300 
1301     sysbus_init_irq(sbd, &s->irq);
1302 }
1303 
1304 static void dwc2_init(Object *obj)
1305 {
1306     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
1307     DWC2State *s = DWC2_USB(obj);
1308 
1309     memory_region_init(&s->container, obj, "dwc2", DWC2_MMIO_SIZE);
1310     sysbus_init_mmio(sbd, &s->container);
1311 
1312     memory_region_init_io(&s->hsotg, obj, &dwc2_mmio_hsotg_ops, s,
1313                           "dwc2-io", 4 * KiB);
1314     memory_region_add_subregion(&s->container, 0x0000, &s->hsotg);
1315 
1316     memory_region_init_io(&s->fifos, obj, &dwc2_mmio_hreg2_ops, s,
1317                           "dwc2-fifo", 64 * KiB);
1318     memory_region_add_subregion(&s->container, 0x1000, &s->fifos);
1319 }
1320 
1321 static const VMStateDescription vmstate_dwc2_state_packet = {
1322     .name = "dwc2/packet",
1323     .version_id = 1,
1324     .minimum_version_id = 1,
1325     .fields = (VMStateField[]) {
1326         VMSTATE_UINT32(devadr, DWC2Packet),
1327         VMSTATE_UINT32(epnum, DWC2Packet),
1328         VMSTATE_UINT32(epdir, DWC2Packet),
1329         VMSTATE_UINT32(mps, DWC2Packet),
1330         VMSTATE_UINT32(pid, DWC2Packet),
1331         VMSTATE_UINT32(index, DWC2Packet),
1332         VMSTATE_UINT32(pcnt, DWC2Packet),
1333         VMSTATE_UINT32(len, DWC2Packet),
1334         VMSTATE_INT32(async, DWC2Packet),
1335         VMSTATE_BOOL(small, DWC2Packet),
1336         VMSTATE_BOOL(needs_service, DWC2Packet),
1337         VMSTATE_END_OF_LIST()
1338     },
1339 };
1340 
1341 const VMStateDescription vmstate_dwc2_state = {
1342     .name = "dwc2",
1343     .version_id = 1,
1344     .minimum_version_id = 1,
1345     .fields = (VMStateField[]) {
1346         VMSTATE_UINT32_ARRAY(glbreg, DWC2State,
1347                              DWC2_GLBREG_SIZE / sizeof(uint32_t)),
1348         VMSTATE_UINT32_ARRAY(fszreg, DWC2State,
1349                              DWC2_FSZREG_SIZE / sizeof(uint32_t)),
1350         VMSTATE_UINT32_ARRAY(hreg0, DWC2State,
1351                              DWC2_HREG0_SIZE / sizeof(uint32_t)),
1352         VMSTATE_UINT32_ARRAY(hreg1, DWC2State,
1353                              DWC2_HREG1_SIZE / sizeof(uint32_t)),
1354         VMSTATE_UINT32_ARRAY(pcgreg, DWC2State,
1355                              DWC2_PCGREG_SIZE / sizeof(uint32_t)),
1356 
1357         VMSTATE_TIMER_PTR(eof_timer, DWC2State),
1358         VMSTATE_TIMER_PTR(frame_timer, DWC2State),
1359         VMSTATE_INT64(sof_time, DWC2State),
1360         VMSTATE_INT64(usb_frame_time, DWC2State),
1361         VMSTATE_INT64(usb_bit_time, DWC2State),
1362         VMSTATE_UINT32(usb_version, DWC2State),
1363         VMSTATE_UINT16(frame_number, DWC2State),
1364         VMSTATE_UINT16(fi, DWC2State),
1365         VMSTATE_UINT16(next_chan, DWC2State),
1366         VMSTATE_BOOL(working, DWC2State),
1367 
1368         VMSTATE_STRUCT_ARRAY(packet, DWC2State, DWC2_NB_CHAN, 1,
1369                              vmstate_dwc2_state_packet, DWC2Packet),
1370         VMSTATE_UINT8_2DARRAY(usb_buf, DWC2State, DWC2_NB_CHAN,
1371                               DWC2_MAX_XFER_SIZE),
1372 
1373         VMSTATE_END_OF_LIST()
1374     }
1375 };
1376 
1377 static Property dwc2_usb_properties[] = {
1378     DEFINE_PROP_UINT32("usb_version", DWC2State, usb_version, 2),
1379     DEFINE_PROP_END_OF_LIST(),
1380 };
1381 
1382 static void dwc2_class_init(ObjectClass *klass, void *data)
1383 {
1384     DeviceClass *dc = DEVICE_CLASS(klass);
1385     DWC2Class *c = DWC2_CLASS(klass);
1386     ResettableClass *rc = RESETTABLE_CLASS(klass);
1387 
1388     dc->realize = dwc2_realize;
1389     dc->vmsd = &vmstate_dwc2_state;
1390     set_bit(DEVICE_CATEGORY_USB, dc->categories);
1391     device_class_set_props(dc, dwc2_usb_properties);
1392     resettable_class_set_parent_phases(rc, dwc2_reset_enter, dwc2_reset_hold,
1393                                        dwc2_reset_exit, &c->parent_phases);
1394 }
1395 
1396 static const TypeInfo dwc2_usb_type_info = {
1397     .name          = TYPE_DWC2_USB,
1398     .parent        = TYPE_SYS_BUS_DEVICE,
1399     .instance_size = sizeof(DWC2State),
1400     .instance_init = dwc2_init,
1401     .class_size    = sizeof(DWC2Class),
1402     .class_init    = dwc2_class_init,
1403 };
1404 
1405 static void dwc2_usb_register_types(void)
1406 {
1407     type_register_static(&dwc2_usb_type_info);
1408 }
1409 
1410 type_init(dwc2_usb_register_types)
1411