1 /* 2 * USB Mass Storage Device emulation 3 * 4 * Copyright (c) 2006 CodeSourcery. 5 * Written by Paul Brook 6 * 7 * This code is licensed under the LGPL. 8 */ 9 10 #include "qemu-common.h" 11 #include "qemu/option.h" 12 #include "qemu/config-file.h" 13 #include "hw/usb.h" 14 #include "hw/usb/desc.h" 15 #include "hw/scsi/scsi.h" 16 #include "ui/console.h" 17 #include "monitor/monitor.h" 18 #include "sysemu/sysemu.h" 19 #include "sysemu/blockdev.h" 20 21 //#define DEBUG_MSD 22 23 #ifdef DEBUG_MSD 24 #define DPRINTF(fmt, ...) \ 25 do { printf("usb-msd: " fmt , ## __VA_ARGS__); } while (0) 26 #else 27 #define DPRINTF(fmt, ...) do {} while(0) 28 #endif 29 30 /* USB requests. */ 31 #define MassStorageReset 0xff 32 #define GetMaxLun 0xfe 33 34 enum USBMSDMode { 35 USB_MSDM_CBW, /* Command Block. */ 36 USB_MSDM_DATAOUT, /* Transfer data to device. */ 37 USB_MSDM_DATAIN, /* Transfer data from device. */ 38 USB_MSDM_CSW /* Command Status. */ 39 }; 40 41 struct usb_msd_csw { 42 uint32_t sig; 43 uint32_t tag; 44 uint32_t residue; 45 uint8_t status; 46 }; 47 48 typedef struct { 49 USBDevice dev; 50 enum USBMSDMode mode; 51 uint32_t scsi_off; 52 uint32_t scsi_len; 53 uint32_t data_len; 54 struct usb_msd_csw csw; 55 SCSIRequest *req; 56 SCSIBus bus; 57 /* For async completion. */ 58 USBPacket *packet; 59 /* usb-storage only */ 60 BlockConf conf; 61 uint32_t removable; 62 } MSDState; 63 64 struct usb_msd_cbw { 65 uint32_t sig; 66 uint32_t tag; 67 uint32_t data_len; 68 uint8_t flags; 69 uint8_t lun; 70 uint8_t cmd_len; 71 uint8_t cmd[16]; 72 }; 73 74 enum { 75 STR_MANUFACTURER = 1, 76 STR_PRODUCT, 77 STR_SERIALNUMBER, 78 STR_CONFIG_FULL, 79 STR_CONFIG_HIGH, 80 STR_CONFIG_SUPER, 81 }; 82 83 static const USBDescStrings desc_strings = { 84 [STR_MANUFACTURER] = "QEMU", 85 [STR_PRODUCT] = "QEMU USB HARDDRIVE", 86 [STR_SERIALNUMBER] = "1", 87 [STR_CONFIG_FULL] = "Full speed config (usb 1.1)", 88 [STR_CONFIG_HIGH] = "High speed config (usb 2.0)", 89 [STR_CONFIG_SUPER] = "Super speed config (usb 3.0)", 90 }; 91 92 static const USBDescIface desc_iface_full = { 93 .bInterfaceNumber = 0, 94 .bNumEndpoints = 2, 95 .bInterfaceClass = USB_CLASS_MASS_STORAGE, 96 .bInterfaceSubClass = 0x06, /* SCSI */ 97 .bInterfaceProtocol = 0x50, /* Bulk */ 98 .eps = (USBDescEndpoint[]) { 99 { 100 .bEndpointAddress = USB_DIR_IN | 0x01, 101 .bmAttributes = USB_ENDPOINT_XFER_BULK, 102 .wMaxPacketSize = 64, 103 },{ 104 .bEndpointAddress = USB_DIR_OUT | 0x02, 105 .bmAttributes = USB_ENDPOINT_XFER_BULK, 106 .wMaxPacketSize = 64, 107 }, 108 } 109 }; 110 111 static const USBDescDevice desc_device_full = { 112 .bcdUSB = 0x0200, 113 .bMaxPacketSize0 = 8, 114 .bNumConfigurations = 1, 115 .confs = (USBDescConfig[]) { 116 { 117 .bNumInterfaces = 1, 118 .bConfigurationValue = 1, 119 .iConfiguration = STR_CONFIG_FULL, 120 .bmAttributes = 0xc0, 121 .nif = 1, 122 .ifs = &desc_iface_full, 123 }, 124 }, 125 }; 126 127 static const USBDescIface desc_iface_high = { 128 .bInterfaceNumber = 0, 129 .bNumEndpoints = 2, 130 .bInterfaceClass = USB_CLASS_MASS_STORAGE, 131 .bInterfaceSubClass = 0x06, /* SCSI */ 132 .bInterfaceProtocol = 0x50, /* Bulk */ 133 .eps = (USBDescEndpoint[]) { 134 { 135 .bEndpointAddress = USB_DIR_IN | 0x01, 136 .bmAttributes = USB_ENDPOINT_XFER_BULK, 137 .wMaxPacketSize = 512, 138 },{ 139 .bEndpointAddress = USB_DIR_OUT | 0x02, 140 .bmAttributes = USB_ENDPOINT_XFER_BULK, 141 .wMaxPacketSize = 512, 142 }, 143 } 144 }; 145 146 static const USBDescDevice desc_device_high = { 147 .bcdUSB = 0x0200, 148 .bMaxPacketSize0 = 64, 149 .bNumConfigurations = 1, 150 .confs = (USBDescConfig[]) { 151 { 152 .bNumInterfaces = 1, 153 .bConfigurationValue = 1, 154 .iConfiguration = STR_CONFIG_HIGH, 155 .bmAttributes = 0xc0, 156 .nif = 1, 157 .ifs = &desc_iface_high, 158 }, 159 }, 160 }; 161 162 static const USBDescIface desc_iface_super = { 163 .bInterfaceNumber = 0, 164 .bNumEndpoints = 2, 165 .bInterfaceClass = USB_CLASS_MASS_STORAGE, 166 .bInterfaceSubClass = 0x06, /* SCSI */ 167 .bInterfaceProtocol = 0x50, /* Bulk */ 168 .eps = (USBDescEndpoint[]) { 169 { 170 .bEndpointAddress = USB_DIR_IN | 0x01, 171 .bmAttributes = USB_ENDPOINT_XFER_BULK, 172 .wMaxPacketSize = 1024, 173 .bMaxBurst = 15, 174 },{ 175 .bEndpointAddress = USB_DIR_OUT | 0x02, 176 .bmAttributes = USB_ENDPOINT_XFER_BULK, 177 .wMaxPacketSize = 1024, 178 .bMaxBurst = 15, 179 }, 180 } 181 }; 182 183 static const USBDescDevice desc_device_super = { 184 .bcdUSB = 0x0300, 185 .bMaxPacketSize0 = 9, 186 .bNumConfigurations = 1, 187 .confs = (USBDescConfig[]) { 188 { 189 .bNumInterfaces = 1, 190 .bConfigurationValue = 1, 191 .iConfiguration = STR_CONFIG_SUPER, 192 .bmAttributes = 0xc0, 193 .nif = 1, 194 .ifs = &desc_iface_super, 195 }, 196 }, 197 }; 198 199 static const USBDesc desc = { 200 .id = { 201 .idVendor = 0x46f4, /* CRC16() of "QEMU" */ 202 .idProduct = 0x0001, 203 .bcdDevice = 0, 204 .iManufacturer = STR_MANUFACTURER, 205 .iProduct = STR_PRODUCT, 206 .iSerialNumber = STR_SERIALNUMBER, 207 }, 208 .full = &desc_device_full, 209 .high = &desc_device_high, 210 .super = &desc_device_super, 211 .str = desc_strings, 212 }; 213 214 static void usb_msd_copy_data(MSDState *s, USBPacket *p) 215 { 216 uint32_t len; 217 len = p->iov.size - p->actual_length; 218 if (len > s->scsi_len) 219 len = s->scsi_len; 220 usb_packet_copy(p, scsi_req_get_buf(s->req) + s->scsi_off, len); 221 s->scsi_len -= len; 222 s->scsi_off += len; 223 s->data_len -= len; 224 if (s->scsi_len == 0 || s->data_len == 0) { 225 scsi_req_continue(s->req); 226 } 227 } 228 229 static void usb_msd_send_status(MSDState *s, USBPacket *p) 230 { 231 int len; 232 233 DPRINTF("Command status %d tag 0x%x, len %zd\n", 234 s->csw.status, le32_to_cpu(s->csw.tag), p->iov.size); 235 236 assert(s->csw.sig == cpu_to_le32(0x53425355)); 237 len = MIN(sizeof(s->csw), p->iov.size); 238 usb_packet_copy(p, &s->csw, len); 239 memset(&s->csw, 0, sizeof(s->csw)); 240 } 241 242 static void usb_msd_packet_complete(MSDState *s) 243 { 244 USBPacket *p = s->packet; 245 246 /* Set s->packet to NULL before calling usb_packet_complete 247 because another request may be issued before 248 usb_packet_complete returns. */ 249 DPRINTF("Packet complete %p\n", p); 250 s->packet = NULL; 251 usb_packet_complete(&s->dev, p); 252 } 253 254 static void usb_msd_transfer_data(SCSIRequest *req, uint32_t len) 255 { 256 MSDState *s = DO_UPCAST(MSDState, dev.qdev, req->bus->qbus.parent); 257 USBPacket *p = s->packet; 258 259 assert((s->mode == USB_MSDM_DATAOUT) == (req->cmd.mode == SCSI_XFER_TO_DEV)); 260 s->scsi_len = len; 261 s->scsi_off = 0; 262 if (p) { 263 usb_msd_copy_data(s, p); 264 p = s->packet; 265 if (p && p->actual_length == p->iov.size) { 266 p->status = USB_RET_SUCCESS; /* Clear previous ASYNC status */ 267 usb_msd_packet_complete(s); 268 } 269 } 270 } 271 272 static void usb_msd_command_complete(SCSIRequest *req, uint32_t status, size_t resid) 273 { 274 MSDState *s = DO_UPCAST(MSDState, dev.qdev, req->bus->qbus.parent); 275 USBPacket *p = s->packet; 276 277 DPRINTF("Command complete %d tag 0x%x\n", status, req->tag); 278 279 s->csw.sig = cpu_to_le32(0x53425355); 280 s->csw.tag = cpu_to_le32(req->tag); 281 s->csw.residue = cpu_to_le32(s->data_len); 282 s->csw.status = status != 0; 283 284 if (s->packet) { 285 if (s->data_len == 0 && s->mode == USB_MSDM_DATAOUT) { 286 /* A deferred packet with no write data remaining must be 287 the status read packet. */ 288 usb_msd_send_status(s, p); 289 s->mode = USB_MSDM_CBW; 290 } else if (s->mode == USB_MSDM_CSW) { 291 usb_msd_send_status(s, p); 292 s->mode = USB_MSDM_CBW; 293 } else { 294 if (s->data_len) { 295 int len = (p->iov.size - p->actual_length); 296 usb_packet_skip(p, len); 297 s->data_len -= len; 298 } 299 if (s->data_len == 0) { 300 s->mode = USB_MSDM_CSW; 301 } 302 } 303 p->status = USB_RET_SUCCESS; /* Clear previous ASYNC status */ 304 usb_msd_packet_complete(s); 305 } else if (s->data_len == 0) { 306 s->mode = USB_MSDM_CSW; 307 } 308 scsi_req_unref(req); 309 s->req = NULL; 310 } 311 312 static void usb_msd_request_cancelled(SCSIRequest *req) 313 { 314 MSDState *s = DO_UPCAST(MSDState, dev.qdev, req->bus->qbus.parent); 315 316 if (req == s->req) { 317 scsi_req_unref(s->req); 318 s->req = NULL; 319 s->scsi_len = 0; 320 } 321 } 322 323 static void usb_msd_handle_reset(USBDevice *dev) 324 { 325 MSDState *s = (MSDState *)dev; 326 327 DPRINTF("Reset\n"); 328 if (s->req) { 329 scsi_req_cancel(s->req); 330 } 331 assert(s->req == NULL); 332 333 if (s->packet) { 334 s->packet->status = USB_RET_STALL; 335 usb_msd_packet_complete(s); 336 } 337 338 s->mode = USB_MSDM_CBW; 339 } 340 341 static void usb_msd_handle_control(USBDevice *dev, USBPacket *p, 342 int request, int value, int index, int length, uint8_t *data) 343 { 344 MSDState *s = (MSDState *)dev; 345 SCSIDevice *scsi_dev; 346 int ret, maxlun; 347 348 ret = usb_desc_handle_control(dev, p, request, value, index, length, data); 349 if (ret >= 0) { 350 return; 351 } 352 353 switch (request) { 354 case EndpointOutRequest | USB_REQ_CLEAR_FEATURE: 355 break; 356 /* Class specific requests. */ 357 case ClassInterfaceOutRequest | MassStorageReset: 358 /* Reset state ready for the next CBW. */ 359 s->mode = USB_MSDM_CBW; 360 break; 361 case ClassInterfaceRequest | GetMaxLun: 362 maxlun = 0; 363 for (;;) { 364 scsi_dev = scsi_device_find(&s->bus, 0, 0, maxlun+1); 365 if (scsi_dev == NULL) { 366 break; 367 } 368 if (scsi_dev->lun != maxlun+1) { 369 break; 370 } 371 maxlun++; 372 } 373 DPRINTF("MaxLun %d\n", maxlun); 374 data[0] = maxlun; 375 p->actual_length = 1; 376 break; 377 default: 378 p->status = USB_RET_STALL; 379 break; 380 } 381 } 382 383 static void usb_msd_cancel_io(USBDevice *dev, USBPacket *p) 384 { 385 MSDState *s = DO_UPCAST(MSDState, dev, dev); 386 387 assert(s->packet == p); 388 s->packet = NULL; 389 390 if (s->req) { 391 scsi_req_cancel(s->req); 392 } 393 } 394 395 static void usb_msd_handle_data(USBDevice *dev, USBPacket *p) 396 { 397 MSDState *s = (MSDState *)dev; 398 uint32_t tag; 399 struct usb_msd_cbw cbw; 400 uint8_t devep = p->ep->nr; 401 SCSIDevice *scsi_dev; 402 uint32_t len; 403 404 switch (p->pid) { 405 case USB_TOKEN_OUT: 406 if (devep != 2) 407 goto fail; 408 409 switch (s->mode) { 410 case USB_MSDM_CBW: 411 if (p->iov.size != 31) { 412 fprintf(stderr, "usb-msd: Bad CBW size"); 413 goto fail; 414 } 415 usb_packet_copy(p, &cbw, 31); 416 if (le32_to_cpu(cbw.sig) != 0x43425355) { 417 fprintf(stderr, "usb-msd: Bad signature %08x\n", 418 le32_to_cpu(cbw.sig)); 419 goto fail; 420 } 421 DPRINTF("Command on LUN %d\n", cbw.lun); 422 scsi_dev = scsi_device_find(&s->bus, 0, 0, cbw.lun); 423 if (scsi_dev == NULL) { 424 fprintf(stderr, "usb-msd: Bad LUN %d\n", cbw.lun); 425 goto fail; 426 } 427 tag = le32_to_cpu(cbw.tag); 428 s->data_len = le32_to_cpu(cbw.data_len); 429 if (s->data_len == 0) { 430 s->mode = USB_MSDM_CSW; 431 } else if (cbw.flags & 0x80) { 432 s->mode = USB_MSDM_DATAIN; 433 } else { 434 s->mode = USB_MSDM_DATAOUT; 435 } 436 DPRINTF("Command tag 0x%x flags %08x len %d data %d\n", 437 tag, cbw.flags, cbw.cmd_len, s->data_len); 438 assert(le32_to_cpu(s->csw.residue) == 0); 439 s->scsi_len = 0; 440 s->req = scsi_req_new(scsi_dev, tag, cbw.lun, cbw.cmd, NULL); 441 #ifdef DEBUG_MSD 442 scsi_req_print(s->req); 443 #endif 444 len = scsi_req_enqueue(s->req); 445 if (len) { 446 scsi_req_continue(s->req); 447 } 448 break; 449 450 case USB_MSDM_DATAOUT: 451 DPRINTF("Data out %zd/%d\n", p->iov.size, s->data_len); 452 if (p->iov.size > s->data_len) { 453 goto fail; 454 } 455 456 if (s->scsi_len) { 457 usb_msd_copy_data(s, p); 458 } 459 if (le32_to_cpu(s->csw.residue)) { 460 int len = p->iov.size - p->actual_length; 461 if (len) { 462 usb_packet_skip(p, len); 463 s->data_len -= len; 464 if (s->data_len == 0) { 465 s->mode = USB_MSDM_CSW; 466 } 467 } 468 } 469 if (p->actual_length < p->iov.size) { 470 DPRINTF("Deferring packet %p [wait data-out]\n", p); 471 s->packet = p; 472 p->status = USB_RET_ASYNC; 473 } 474 break; 475 476 default: 477 DPRINTF("Unexpected write (len %zd)\n", p->iov.size); 478 goto fail; 479 } 480 break; 481 482 case USB_TOKEN_IN: 483 if (devep != 1) 484 goto fail; 485 486 switch (s->mode) { 487 case USB_MSDM_DATAOUT: 488 if (s->data_len != 0 || p->iov.size < 13) { 489 goto fail; 490 } 491 /* Waiting for SCSI write to complete. */ 492 s->packet = p; 493 p->status = USB_RET_ASYNC; 494 break; 495 496 case USB_MSDM_CSW: 497 if (p->iov.size < 13) { 498 goto fail; 499 } 500 501 if (s->req) { 502 /* still in flight */ 503 DPRINTF("Deferring packet %p [wait status]\n", p); 504 s->packet = p; 505 p->status = USB_RET_ASYNC; 506 } else { 507 usb_msd_send_status(s, p); 508 s->mode = USB_MSDM_CBW; 509 } 510 break; 511 512 case USB_MSDM_DATAIN: 513 DPRINTF("Data in %zd/%d, scsi_len %d\n", 514 p->iov.size, s->data_len, s->scsi_len); 515 if (s->scsi_len) { 516 usb_msd_copy_data(s, p); 517 } 518 if (le32_to_cpu(s->csw.residue)) { 519 int len = p->iov.size - p->actual_length; 520 if (len) { 521 usb_packet_skip(p, len); 522 s->data_len -= len; 523 if (s->data_len == 0) { 524 s->mode = USB_MSDM_CSW; 525 } 526 } 527 } 528 if (p->actual_length < p->iov.size) { 529 DPRINTF("Deferring packet %p [wait data-in]\n", p); 530 s->packet = p; 531 p->status = USB_RET_ASYNC; 532 } 533 break; 534 535 default: 536 DPRINTF("Unexpected read (len %zd)\n", p->iov.size); 537 goto fail; 538 } 539 break; 540 541 default: 542 DPRINTF("Bad token\n"); 543 fail: 544 p->status = USB_RET_STALL; 545 break; 546 } 547 } 548 549 static void usb_msd_password_cb(void *opaque, int err) 550 { 551 MSDState *s = opaque; 552 553 if (!err) 554 err = usb_device_attach(&s->dev); 555 556 if (err) 557 qdev_unplug(&s->dev.qdev, NULL); 558 } 559 560 static void *usb_msd_load_request(QEMUFile *f, SCSIRequest *req) 561 { 562 MSDState *s = DO_UPCAST(MSDState, dev.qdev, req->bus->qbus.parent); 563 564 /* nothing to load, just store req in our state struct */ 565 assert(s->req == NULL); 566 scsi_req_ref(req); 567 s->req = req; 568 return NULL; 569 } 570 571 static const struct SCSIBusInfo usb_msd_scsi_info_storage = { 572 .tcq = false, 573 .max_target = 0, 574 .max_lun = 0, 575 576 .transfer_data = usb_msd_transfer_data, 577 .complete = usb_msd_command_complete, 578 .cancel = usb_msd_request_cancelled, 579 .load_request = usb_msd_load_request, 580 }; 581 582 static const struct SCSIBusInfo usb_msd_scsi_info_bot = { 583 .tcq = false, 584 .max_target = 0, 585 .max_lun = 15, 586 587 .transfer_data = usb_msd_transfer_data, 588 .complete = usb_msd_command_complete, 589 .cancel = usb_msd_request_cancelled, 590 .load_request = usb_msd_load_request, 591 }; 592 593 static int usb_msd_initfn_storage(USBDevice *dev) 594 { 595 MSDState *s = DO_UPCAST(MSDState, dev, dev); 596 BlockDriverState *bs = s->conf.bs; 597 SCSIDevice *scsi_dev; 598 Error *err = NULL; 599 600 if (!bs) { 601 error_report("drive property not set"); 602 return -1; 603 } 604 605 blkconf_serial(&s->conf, &dev->serial); 606 607 /* 608 * Hack alert: this pretends to be a block device, but it's really 609 * a SCSI bus that can serve only a single device, which it 610 * creates automatically. But first it needs to detach from its 611 * blockdev, or else scsi_bus_legacy_add_drive() dies when it 612 * attaches again. 613 * 614 * The hack is probably a bad idea. 615 */ 616 bdrv_detach_dev(bs, &s->dev.qdev); 617 s->conf.bs = NULL; 618 619 usb_desc_create_serial(dev); 620 usb_desc_init(dev); 621 scsi_bus_new(&s->bus, &s->dev.qdev, &usb_msd_scsi_info_storage, NULL); 622 scsi_dev = scsi_bus_legacy_add_drive(&s->bus, bs, 0, !!s->removable, 623 s->conf.bootindex, dev->serial, 624 &err); 625 if (!scsi_dev) { 626 return -1; 627 } 628 s->bus.qbus.allow_hotplug = 0; 629 usb_msd_handle_reset(dev); 630 631 if (bdrv_key_required(bs)) { 632 if (cur_mon) { 633 monitor_read_bdrv_key_start(cur_mon, bs, usb_msd_password_cb, s); 634 s->dev.auto_attach = 0; 635 } else { 636 autostart = 0; 637 } 638 } 639 640 return 0; 641 } 642 643 static int usb_msd_initfn_bot(USBDevice *dev) 644 { 645 MSDState *s = DO_UPCAST(MSDState, dev, dev); 646 647 usb_desc_create_serial(dev); 648 usb_desc_init(dev); 649 scsi_bus_new(&s->bus, &s->dev.qdev, &usb_msd_scsi_info_bot, NULL); 650 s->bus.qbus.allow_hotplug = 0; 651 usb_msd_handle_reset(dev); 652 653 return 0; 654 } 655 656 static USBDevice *usb_msd_init(USBBus *bus, const char *filename) 657 { 658 static int nr=0; 659 char id[8]; 660 QemuOpts *opts; 661 DriveInfo *dinfo; 662 USBDevice *dev; 663 const char *p1; 664 char fmt[32]; 665 666 /* parse -usbdevice disk: syntax into drive opts */ 667 snprintf(id, sizeof(id), "usb%d", nr++); 668 opts = qemu_opts_create(qemu_find_opts("drive"), id, 0, NULL); 669 670 p1 = strchr(filename, ':'); 671 if (p1++) { 672 const char *p2; 673 674 if (strstart(filename, "format=", &p2)) { 675 int len = MIN(p1 - p2, sizeof(fmt)); 676 pstrcpy(fmt, len, p2); 677 qemu_opt_set(opts, "format", fmt); 678 } else if (*filename != ':') { 679 printf("unrecognized USB mass-storage option %s\n", filename); 680 return NULL; 681 } 682 filename = p1; 683 } 684 if (!*filename) { 685 printf("block device specification needed\n"); 686 return NULL; 687 } 688 qemu_opt_set(opts, "file", filename); 689 qemu_opt_set(opts, "if", "none"); 690 691 /* create host drive */ 692 dinfo = drive_init(opts, 0); 693 if (!dinfo) { 694 qemu_opts_del(opts); 695 return NULL; 696 } 697 698 /* create guest device */ 699 dev = usb_create(bus, "usb-storage"); 700 if (!dev) { 701 return NULL; 702 } 703 if (qdev_prop_set_drive(&dev->qdev, "drive", dinfo->bdrv) < 0) { 704 qdev_free(&dev->qdev); 705 return NULL; 706 } 707 if (qdev_init(&dev->qdev) < 0) 708 return NULL; 709 710 return dev; 711 } 712 713 static const VMStateDescription vmstate_usb_msd = { 714 .name = "usb-storage", 715 .version_id = 1, 716 .minimum_version_id = 1, 717 .fields = (VMStateField []) { 718 VMSTATE_USB_DEVICE(dev, MSDState), 719 VMSTATE_UINT32(mode, MSDState), 720 VMSTATE_UINT32(scsi_len, MSDState), 721 VMSTATE_UINT32(scsi_off, MSDState), 722 VMSTATE_UINT32(data_len, MSDState), 723 VMSTATE_UINT32(csw.sig, MSDState), 724 VMSTATE_UINT32(csw.tag, MSDState), 725 VMSTATE_UINT32(csw.residue, MSDState), 726 VMSTATE_UINT8(csw.status, MSDState), 727 VMSTATE_END_OF_LIST() 728 } 729 }; 730 731 static Property msd_properties[] = { 732 DEFINE_BLOCK_PROPERTIES(MSDState, conf), 733 DEFINE_PROP_BIT("removable", MSDState, removable, 0, false), 734 DEFINE_PROP_END_OF_LIST(), 735 }; 736 737 static void usb_msd_class_initfn_common(ObjectClass *klass) 738 { 739 DeviceClass *dc = DEVICE_CLASS(klass); 740 USBDeviceClass *uc = USB_DEVICE_CLASS(klass); 741 742 uc->product_desc = "QEMU USB MSD"; 743 uc->usb_desc = &desc; 744 uc->cancel_packet = usb_msd_cancel_io; 745 uc->handle_attach = usb_desc_attach; 746 uc->handle_reset = usb_msd_handle_reset; 747 uc->handle_control = usb_msd_handle_control; 748 uc->handle_data = usb_msd_handle_data; 749 dc->fw_name = "storage"; 750 dc->vmsd = &vmstate_usb_msd; 751 } 752 753 static void usb_msd_class_initfn_storage(ObjectClass *klass, void *data) 754 { 755 DeviceClass *dc = DEVICE_CLASS(klass); 756 USBDeviceClass *uc = USB_DEVICE_CLASS(klass); 757 758 uc->init = usb_msd_initfn_storage; 759 dc->props = msd_properties; 760 usb_msd_class_initfn_common(klass); 761 } 762 763 static void usb_msd_class_initfn_bot(ObjectClass *klass, void *data) 764 { 765 USBDeviceClass *uc = USB_DEVICE_CLASS(klass); 766 767 uc->init = usb_msd_initfn_bot; 768 usb_msd_class_initfn_common(klass); 769 } 770 771 static const TypeInfo msd_info = { 772 .name = "usb-storage", 773 .parent = TYPE_USB_DEVICE, 774 .instance_size = sizeof(MSDState), 775 .class_init = usb_msd_class_initfn_storage, 776 }; 777 778 static const TypeInfo bot_info = { 779 .name = "usb-bot", 780 .parent = TYPE_USB_DEVICE, 781 .instance_size = sizeof(MSDState), 782 .class_init = usb_msd_class_initfn_bot, 783 }; 784 785 static void usb_msd_register_types(void) 786 { 787 type_register_static(&msd_info); 788 type_register_static(&bot_info); 789 usb_legacy_register("usb-storage", "disk", usb_msd_init); 790 } 791 792 type_init(usb_msd_register_types) 793