1 /* 2 * Copyright (C) 2011 Red Hat, Inc. 3 * 4 * CCID Device emulation 5 * 6 * Written by Alon Levy, with contributions from Robert Relyea. 7 * 8 * Based on usb-serial.c, see its copyright and attributions below. 9 * 10 * This work is licensed under the terms of the GNU GPL, version 2.1 or later. 11 * See the COPYING file in the top-level directory. 12 * ------- (original copyright & attribution for usb-serial.c below) -------- 13 * Copyright (c) 2006 CodeSourcery. 14 * Copyright (c) 2008 Samuel Thibault <samuel.thibault@ens-lyon.org> 15 * Written by Paul Brook, reused for FTDI by Samuel Thibault, 16 */ 17 18 /* 19 * References: 20 * 21 * CCID Specification Revision 1.1 April 22nd 2005 22 * "Universal Serial Bus, Device Class: Smart Card" 23 * Specification for Integrated Circuit(s) Cards Interface Devices 24 * 25 * Endianness note: from the spec (1.3) 26 * "Fields that are larger than a byte are stored in little endian" 27 * 28 * KNOWN BUGS 29 * 1. remove/insert can sometimes result in removed state instead of inserted. 30 * This is a result of the following: 31 * symptom: dmesg shows ERMOTEIO (-121), pcscd shows -99. This can happen 32 * when a short packet is sent, as seen in uhci-usb.c, resulting from a urb 33 * from the guest requesting SPD and us returning a smaller packet. 34 * Not sure which messages trigger this. 35 */ 36 37 #include "qemu/osdep.h" 38 #include "qemu/units.h" 39 #include "qapi/error.h" 40 #include "qemu/cutils.h" 41 #include "qemu/error-report.h" 42 #include "qemu/module.h" 43 #include "hw/qdev-properties.h" 44 #include "hw/usb.h" 45 #include "migration/vmstate.h" 46 #include "desc.h" 47 48 #include "ccid.h" 49 #include "qom/object.h" 50 51 #define DPRINTF(s, lvl, fmt, ...) \ 52 do { \ 53 if (lvl <= s->debug) { \ 54 printf("usb-ccid: " fmt , ## __VA_ARGS__); \ 55 } \ 56 } while (0) 57 58 #define D_WARN 1 59 #define D_INFO 2 60 #define D_MORE_INFO 3 61 #define D_VERBOSE 4 62 63 #define TYPE_USB_CCID_DEV "usb-ccid" 64 OBJECT_DECLARE_SIMPLE_TYPE(USBCCIDState, USB_CCID_DEV) 65 /* 66 * The two options for variable sized buffers: 67 * make them constant size, for large enough constant, 68 * or handle the migration complexity - VMState doesn't handle this case. 69 * sizes are expected never to be exceeded, unless guest misbehaves. 70 */ 71 #define BULK_OUT_DATA_SIZE (64 * KiB) 72 #define PENDING_ANSWERS_NUM 128 73 74 #define BULK_IN_BUF_SIZE 384 75 #define BULK_IN_PENDING_NUM 8 76 77 #define CCID_MAX_PACKET_SIZE 64 78 79 #define CCID_CONTROL_ABORT 0x1 80 #define CCID_CONTROL_GET_CLOCK_FREQUENCIES 0x2 81 #define CCID_CONTROL_GET_DATA_RATES 0x3 82 83 #define CCID_PRODUCT_DESCRIPTION "QEMU USB CCID" 84 #define CCID_VENDOR_DESCRIPTION "QEMU" 85 #define CCID_INTERFACE_NAME "CCID Interface" 86 #define CCID_SERIAL_NUMBER_STRING "1" 87 /* 88 * Using Gemplus Vendor and Product id 89 * Effect on various drivers: 90 * usbccid.sys (winxp, others untested) is a class driver so it doesn't care. 91 * linux has a number of class drivers, but openct filters based on 92 * vendor/product (/etc/openct.conf under fedora), hence Gemplus. 93 */ 94 #define CCID_VENDOR_ID 0x08e6 95 #define CCID_PRODUCT_ID 0x4433 96 #define CCID_DEVICE_VERSION 0x0000 97 98 /* 99 * BULK_OUT messages from PC to Reader 100 * Defined in CCID Rev 1.1 6.1 (page 26) 101 */ 102 #define CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn 0x62 103 #define CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff 0x63 104 #define CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus 0x65 105 #define CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock 0x6f 106 #define CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters 0x6c 107 #define CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters 0x6d 108 #define CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters 0x61 109 #define CCID_MESSAGE_TYPE_PC_to_RDR_Escape 0x6b 110 #define CCID_MESSAGE_TYPE_PC_to_RDR_IccClock 0x6e 111 #define CCID_MESSAGE_TYPE_PC_to_RDR_T0APDU 0x6a 112 #define CCID_MESSAGE_TYPE_PC_to_RDR_Secure 0x69 113 #define CCID_MESSAGE_TYPE_PC_to_RDR_Mechanical 0x71 114 #define CCID_MESSAGE_TYPE_PC_to_RDR_Abort 0x72 115 #define CCID_MESSAGE_TYPE_PC_to_RDR_SetDataRateAndClockFrequency 0x73 116 117 /* 118 * BULK_IN messages from Reader to PC 119 * Defined in CCID Rev 1.1 6.2 (page 48) 120 */ 121 #define CCID_MESSAGE_TYPE_RDR_to_PC_DataBlock 0x80 122 #define CCID_MESSAGE_TYPE_RDR_to_PC_SlotStatus 0x81 123 #define CCID_MESSAGE_TYPE_RDR_to_PC_Parameters 0x82 124 #define CCID_MESSAGE_TYPE_RDR_to_PC_Escape 0x83 125 #define CCID_MESSAGE_TYPE_RDR_to_PC_DataRateAndClockFrequency 0x84 126 127 /* 128 * INTERRUPT_IN messages from Reader to PC 129 * Defined in CCID Rev 1.1 6.3 (page 56) 130 */ 131 #define CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange 0x50 132 #define CCID_MESSAGE_TYPE_RDR_to_PC_HardwareError 0x51 133 134 /* 135 * Endpoints for CCID - addresses are up to us to decide. 136 * To support slot insertion and removal we must have an interrupt in ep 137 * in addition we need a bulk in and bulk out ep 138 * 5.2, page 20 139 */ 140 #define CCID_INT_IN_EP 1 141 #define CCID_BULK_IN_EP 2 142 #define CCID_BULK_OUT_EP 3 143 144 /* bmSlotICCState masks */ 145 #define SLOT_0_STATE_MASK 1 146 #define SLOT_0_CHANGED_MASK 2 147 148 /* Status codes that go in bStatus (see 6.2.6) */ 149 enum { 150 ICC_STATUS_PRESENT_ACTIVE = 0, 151 ICC_STATUS_PRESENT_INACTIVE, 152 ICC_STATUS_NOT_PRESENT 153 }; 154 155 enum { 156 COMMAND_STATUS_NO_ERROR = 0, 157 COMMAND_STATUS_FAILED, 158 COMMAND_STATUS_TIME_EXTENSION_REQUIRED 159 }; 160 161 /* Error codes that go in bError (see 6.2.6) */ 162 enum { 163 ERROR_CMD_NOT_SUPPORTED = 0, 164 ERROR_CMD_ABORTED = -1, 165 ERROR_ICC_MUTE = -2, 166 ERROR_XFR_PARITY_ERROR = -3, 167 ERROR_XFR_OVERRUN = -4, 168 ERROR_HW_ERROR = -5, 169 }; 170 171 /* 6.2.6 RDR_to_PC_SlotStatus definitions */ 172 enum { 173 CLOCK_STATUS_RUNNING = 0, 174 /* 175 * 0 - Clock Running, 1 - Clock stopped in State L, 2 - H, 176 * 3 - unknown state. rest are RFU 177 */ 178 }; 179 180 typedef struct QEMU_PACKED CCID_Header { 181 uint8_t bMessageType; 182 uint32_t dwLength; 183 uint8_t bSlot; 184 uint8_t bSeq; 185 } CCID_Header; 186 187 typedef struct QEMU_PACKED CCID_BULK_IN { 188 CCID_Header hdr; 189 uint8_t bStatus; /* Only used in BULK_IN */ 190 uint8_t bError; /* Only used in BULK_IN */ 191 } CCID_BULK_IN; 192 193 typedef struct QEMU_PACKED CCID_SlotStatus { 194 CCID_BULK_IN b; 195 uint8_t bClockStatus; 196 } CCID_SlotStatus; 197 198 typedef struct QEMU_PACKED CCID_T0ProtocolDataStructure { 199 uint8_t bmFindexDindex; 200 uint8_t bmTCCKST0; 201 uint8_t bGuardTimeT0; 202 uint8_t bWaitingIntegerT0; 203 uint8_t bClockStop; 204 } CCID_T0ProtocolDataStructure; 205 206 typedef struct QEMU_PACKED CCID_T1ProtocolDataStructure { 207 uint8_t bmFindexDindex; 208 uint8_t bmTCCKST1; 209 uint8_t bGuardTimeT1; 210 uint8_t bWaitingIntegerT1; 211 uint8_t bClockStop; 212 uint8_t bIFSC; 213 uint8_t bNadValue; 214 } CCID_T1ProtocolDataStructure; 215 216 typedef union CCID_ProtocolDataStructure { 217 CCID_T0ProtocolDataStructure t0; 218 CCID_T1ProtocolDataStructure t1; 219 uint8_t data[7]; /* must be = max(sizeof(t0), sizeof(t1)) */ 220 } CCID_ProtocolDataStructure; 221 222 typedef struct QEMU_PACKED CCID_Parameter { 223 CCID_BULK_IN b; 224 uint8_t bProtocolNum; 225 CCID_ProtocolDataStructure abProtocolDataStructure; 226 } CCID_Parameter; 227 228 typedef struct QEMU_PACKED CCID_DataBlock { 229 CCID_BULK_IN b; 230 uint8_t bChainParameter; 231 uint8_t abData[]; 232 } CCID_DataBlock; 233 234 /* 6.1.4 PC_to_RDR_XfrBlock */ 235 typedef struct QEMU_PACKED CCID_XferBlock { 236 CCID_Header hdr; 237 uint8_t bBWI; /* Block Waiting Timeout */ 238 uint16_t wLevelParameter; /* XXX currently unused */ 239 uint8_t abData[]; 240 } CCID_XferBlock; 241 242 typedef struct QEMU_PACKED CCID_IccPowerOn { 243 CCID_Header hdr; 244 uint8_t bPowerSelect; 245 uint16_t abRFU; 246 } CCID_IccPowerOn; 247 248 typedef struct QEMU_PACKED CCID_IccPowerOff { 249 CCID_Header hdr; 250 uint16_t abRFU; 251 } CCID_IccPowerOff; 252 253 typedef struct QEMU_PACKED CCID_SetParameters { 254 CCID_Header hdr; 255 uint8_t bProtocolNum; 256 uint16_t abRFU; 257 CCID_ProtocolDataStructure abProtocolDataStructure; 258 } CCID_SetParameters; 259 260 typedef struct CCID_Notify_Slot_Change { 261 uint8_t bMessageType; /* CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange */ 262 uint8_t bmSlotICCState; 263 } CCID_Notify_Slot_Change; 264 265 /* used for DataBlock response to XferBlock */ 266 typedef struct Answer { 267 uint8_t slot; 268 uint8_t seq; 269 } Answer; 270 271 /* pending BULK_IN messages */ 272 typedef struct BulkIn { 273 uint8_t data[BULK_IN_BUF_SIZE]; 274 uint32_t len; 275 uint32_t pos; 276 } BulkIn; 277 278 struct CCIDBus { 279 BusState qbus; 280 }; 281 282 #define TYPE_CCID_BUS "ccid-bus" 283 OBJECT_DECLARE_SIMPLE_TYPE(CCIDBus, CCID_BUS) 284 285 /* 286 * powered - defaults to true, changed by PowerOn/PowerOff messages 287 */ 288 struct USBCCIDState { 289 USBDevice dev; 290 USBEndpoint *intr; 291 USBEndpoint *bulk; 292 CCIDBus bus; 293 CCIDCardState *card; 294 BulkIn bulk_in_pending[BULK_IN_PENDING_NUM]; /* circular */ 295 uint32_t bulk_in_pending_start; 296 uint32_t bulk_in_pending_end; /* first free */ 297 uint32_t bulk_in_pending_num; 298 BulkIn *current_bulk_in; 299 uint8_t bulk_out_data[BULK_OUT_DATA_SIZE]; 300 uint32_t bulk_out_pos; 301 uint64_t last_answer_error; 302 Answer pending_answers[PENDING_ANSWERS_NUM]; 303 uint32_t pending_answers_start; 304 uint32_t pending_answers_end; 305 uint32_t pending_answers_num; 306 uint8_t bError; 307 uint8_t bmCommandStatus; 308 uint8_t bProtocolNum; 309 CCID_ProtocolDataStructure abProtocolDataStructure; 310 uint32_t ulProtocolDataStructureSize; 311 uint32_t state_vmstate; 312 uint8_t bmSlotICCState; 313 uint8_t powered; 314 uint8_t notify_slot_change; 315 uint8_t debug; 316 }; 317 318 /* 319 * CCID Spec chapter 4: CCID uses a standard device descriptor per Chapter 9, 320 * "USB Device Framework", section 9.6.1, in the Universal Serial Bus 321 * Specification. 322 * 323 * This device implemented based on the spec and with an Athena Smart Card 324 * Reader as reference: 325 * 0dc3:1004 Athena Smartcard Solutions, Inc. 326 */ 327 328 static const uint8_t qemu_ccid_descriptor[] = { 329 /* Smart Card Device Class Descriptor */ 330 0x36, /* u8 bLength; */ 331 0x21, /* u8 bDescriptorType; Functional */ 332 0x10, 0x01, /* u16 bcdCCID; CCID Specification Release Number. */ 333 0x00, /* 334 * u8 bMaxSlotIndex; The index of the highest available 335 * slot on this device. All slots are consecutive starting 336 * at 00h. 337 */ 338 0x07, /* u8 bVoltageSupport; 01h - 5.0v, 02h - 3.0, 03 - 1.8 */ 339 340 0x01, 0x00, /* u32 dwProtocols; RRRR PPPP. RRRR = 0000h.*/ 341 0x00, 0x00, /* PPPP: 0001h = Protocol T=0, 0002h = Protocol T=1 */ 342 /* u32 dwDefaultClock; in kHZ (0x0fa0 is 4 MHz) */ 343 0xa0, 0x0f, 0x00, 0x00, 344 /* u32 dwMaximumClock; */ 345 0x00, 0x00, 0x01, 0x00, 346 0x00, /* u8 bNumClockSupported; * 347 * 0 means just the default and max. */ 348 /* u32 dwDataRate ;bps. 9600 == 00002580h */ 349 0x80, 0x25, 0x00, 0x00, 350 /* u32 dwMaxDataRate ; 11520 bps == 0001C200h */ 351 0x00, 0xC2, 0x01, 0x00, 352 0x00, /* u8 bNumDataRatesSupported; 00 means all rates between 353 * default and max */ 354 /* u32 dwMaxIFSD; * 355 * maximum IFSD supported by CCID for protocol * 356 * T=1 (Maximum seen from various cards) */ 357 0xfe, 0x00, 0x00, 0x00, 358 /* u32 dwSyncProtocols; 1 - 2-wire, 2 - 3-wire, 4 - I2C */ 359 0x00, 0x00, 0x00, 0x00, 360 /* u32 dwMechanical; 0 - no special characteristics. */ 361 0x00, 0x00, 0x00, 0x00, 362 /* 363 * u32 dwFeatures; 364 * 0 - No special characteristics 365 * + 2 Automatic parameter configuration based on ATR data 366 * + 4 Automatic activation of ICC on inserting 367 * + 8 Automatic ICC voltage selection 368 * + 10 Automatic ICC clock frequency change 369 * + 20 Automatic baud rate change 370 * + 40 Automatic parameters negotiation made by the CCID 371 * + 80 automatic PPS made by the CCID 372 * 100 CCID can set ICC in clock stop mode 373 * 200 NAD value other then 00 accepted (T=1 protocol) 374 * + 400 Automatic IFSD exchange as first exchange (T=1) 375 * One of the following only: 376 * + 10000 TPDU level exchanges with CCID 377 * 20000 Short APDU level exchange with CCID 378 * 40000 Short and Extended APDU level exchange with CCID 379 * 380 * 100000 USB Wake up signaling supported on card 381 * insertion and removal. Must set bit 5 in bmAttributes 382 * in Configuration descriptor if 100000 is set. 383 */ 384 0xfe, 0x04, 0x01, 0x00, 385 /* 386 * u32 dwMaxCCIDMessageLength; For extended APDU in 387 * [261 + 10 , 65544 + 10]. Otherwise the minimum is 388 * wMaxPacketSize of the Bulk-OUT endpoint 389 */ 390 0x12, 0x00, 0x01, 0x00, 391 0xFF, /* 392 * u8 bClassGetResponse; Significant only for CCID that 393 * offers an APDU level for exchanges. Indicates the 394 * default class value used by the CCID when it sends a 395 * Get Response command to perform the transportation of 396 * an APDU by T=0 protocol 397 * FFh indicates that the CCID echos the class of the APDU. 398 */ 399 0xFF, /* 400 * u8 bClassEnvelope; EAPDU only. Envelope command for 401 * T=0 402 */ 403 0x00, 0x00, /* 404 * u16 wLcdLayout; XXYY Number of lines (XX) and chars per 405 * line for LCD display used for PIN entry. 0000 - no LCD 406 */ 407 0x01, /* 408 * u8 bPINSupport; 01h PIN Verification, 409 * 02h PIN Modification 410 */ 411 0x01, /* u8 bMaxCCIDBusySlots; */ 412 }; 413 414 enum { 415 STR_MANUFACTURER = 1, 416 STR_PRODUCT, 417 STR_SERIALNUMBER, 418 STR_INTERFACE, 419 }; 420 421 static const USBDescStrings desc_strings = { 422 [STR_MANUFACTURER] = "QEMU", 423 [STR_PRODUCT] = "QEMU USB CCID", 424 [STR_SERIALNUMBER] = "1", 425 [STR_INTERFACE] = "CCID Interface", 426 }; 427 428 static const USBDescIface desc_iface0 = { 429 .bInterfaceNumber = 0, 430 .bNumEndpoints = 3, 431 .bInterfaceClass = USB_CLASS_CSCID, 432 .bInterfaceSubClass = USB_SUBCLASS_UNDEFINED, 433 .bInterfaceProtocol = 0x00, 434 .iInterface = STR_INTERFACE, 435 .ndesc = 1, 436 .descs = (USBDescOther[]) { 437 { 438 /* smartcard descriptor */ 439 .data = qemu_ccid_descriptor, 440 }, 441 }, 442 .eps = (USBDescEndpoint[]) { 443 { 444 .bEndpointAddress = USB_DIR_IN | CCID_INT_IN_EP, 445 .bmAttributes = USB_ENDPOINT_XFER_INT, 446 .bInterval = 255, 447 .wMaxPacketSize = 64, 448 },{ 449 .bEndpointAddress = USB_DIR_IN | CCID_BULK_IN_EP, 450 .bmAttributes = USB_ENDPOINT_XFER_BULK, 451 .wMaxPacketSize = 64, 452 },{ 453 .bEndpointAddress = USB_DIR_OUT | CCID_BULK_OUT_EP, 454 .bmAttributes = USB_ENDPOINT_XFER_BULK, 455 .wMaxPacketSize = 64, 456 }, 457 } 458 }; 459 460 static const USBDescDevice desc_device = { 461 .bcdUSB = 0x0110, 462 .bMaxPacketSize0 = 64, 463 .bNumConfigurations = 1, 464 .confs = (USBDescConfig[]) { 465 { 466 .bNumInterfaces = 1, 467 .bConfigurationValue = 1, 468 .bmAttributes = USB_CFG_ATT_ONE | USB_CFG_ATT_SELFPOWER | 469 USB_CFG_ATT_WAKEUP, 470 .bMaxPower = 50, 471 .nif = 1, 472 .ifs = &desc_iface0, 473 }, 474 }, 475 }; 476 477 static const USBDesc desc_ccid = { 478 .id = { 479 .idVendor = CCID_VENDOR_ID, 480 .idProduct = CCID_PRODUCT_ID, 481 .bcdDevice = CCID_DEVICE_VERSION, 482 .iManufacturer = STR_MANUFACTURER, 483 .iProduct = STR_PRODUCT, 484 .iSerialNumber = STR_SERIALNUMBER, 485 }, 486 .full = &desc_device, 487 .str = desc_strings, 488 }; 489 490 static const uint8_t *ccid_card_get_atr(CCIDCardState *card, uint32_t *len) 491 { 492 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 493 494 if (cc->get_atr) { 495 return cc->get_atr(card, len); 496 } 497 return NULL; 498 } 499 500 static void ccid_card_apdu_from_guest(CCIDCardState *card, 501 const uint8_t *apdu, 502 uint32_t len) 503 { 504 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 505 506 if (cc->apdu_from_guest) { 507 cc->apdu_from_guest(card, apdu, len); 508 } 509 } 510 511 static bool ccid_has_pending_answers(USBCCIDState *s) 512 { 513 return s->pending_answers_num > 0; 514 } 515 516 static void ccid_clear_pending_answers(USBCCIDState *s) 517 { 518 s->pending_answers_num = 0; 519 s->pending_answers_start = 0; 520 s->pending_answers_end = 0; 521 } 522 523 static void ccid_print_pending_answers(USBCCIDState *s) 524 { 525 Answer *answer; 526 int i, count; 527 528 DPRINTF(s, D_VERBOSE, "usb-ccid: pending answers:"); 529 if (!ccid_has_pending_answers(s)) { 530 DPRINTF(s, D_VERBOSE, " empty\n"); 531 return; 532 } 533 for (i = s->pending_answers_start, count = s->pending_answers_num ; 534 count > 0; count--, i++) { 535 answer = &s->pending_answers[i % PENDING_ANSWERS_NUM]; 536 if (count == 1) { 537 DPRINTF(s, D_VERBOSE, "%d:%d\n", answer->slot, answer->seq); 538 } else { 539 DPRINTF(s, D_VERBOSE, "%d:%d,", answer->slot, answer->seq); 540 } 541 } 542 } 543 544 static void ccid_add_pending_answer(USBCCIDState *s, CCID_Header *hdr) 545 { 546 Answer *answer; 547 548 assert(s->pending_answers_num < PENDING_ANSWERS_NUM); 549 s->pending_answers_num++; 550 answer = 551 &s->pending_answers[(s->pending_answers_end++) % PENDING_ANSWERS_NUM]; 552 answer->slot = hdr->bSlot; 553 answer->seq = hdr->bSeq; 554 ccid_print_pending_answers(s); 555 } 556 557 static void ccid_remove_pending_answer(USBCCIDState *s, 558 uint8_t *slot, uint8_t *seq) 559 { 560 Answer *answer; 561 562 assert(s->pending_answers_num > 0); 563 s->pending_answers_num--; 564 answer = 565 &s->pending_answers[(s->pending_answers_start++) % PENDING_ANSWERS_NUM]; 566 *slot = answer->slot; 567 *seq = answer->seq; 568 ccid_print_pending_answers(s); 569 } 570 571 static void ccid_bulk_in_clear(USBCCIDState *s) 572 { 573 s->bulk_in_pending_start = 0; 574 s->bulk_in_pending_end = 0; 575 s->bulk_in_pending_num = 0; 576 } 577 578 static void ccid_bulk_in_release(USBCCIDState *s) 579 { 580 assert(s->current_bulk_in != NULL); 581 s->current_bulk_in->pos = 0; 582 s->current_bulk_in = NULL; 583 } 584 585 static void ccid_bulk_in_get(USBCCIDState *s) 586 { 587 if (s->current_bulk_in != NULL || s->bulk_in_pending_num == 0) { 588 return; 589 } 590 assert(s->bulk_in_pending_num > 0); 591 s->bulk_in_pending_num--; 592 s->current_bulk_in = 593 &s->bulk_in_pending[(s->bulk_in_pending_start++) % BULK_IN_PENDING_NUM]; 594 } 595 596 static void *ccid_reserve_recv_buf(USBCCIDState *s, uint16_t len) 597 { 598 BulkIn *bulk_in; 599 600 DPRINTF(s, D_VERBOSE, "%s: QUEUE: reserve %d bytes\n", __func__, len); 601 602 /* look for an existing element */ 603 if (len > BULK_IN_BUF_SIZE) { 604 DPRINTF(s, D_WARN, "usb-ccid.c: %s: len larger then max (%d>%d). " 605 "discarding message.\n", 606 __func__, len, BULK_IN_BUF_SIZE); 607 return NULL; 608 } 609 if (s->bulk_in_pending_num >= BULK_IN_PENDING_NUM) { 610 DPRINTF(s, D_WARN, "usb-ccid.c: %s: No free bulk_in buffers. " 611 "discarding message.\n", __func__); 612 return NULL; 613 } 614 bulk_in = 615 &s->bulk_in_pending[(s->bulk_in_pending_end++) % BULK_IN_PENDING_NUM]; 616 s->bulk_in_pending_num++; 617 bulk_in->len = len; 618 return bulk_in->data; 619 } 620 621 static void ccid_reset(USBCCIDState *s) 622 { 623 ccid_bulk_in_clear(s); 624 ccid_clear_pending_answers(s); 625 } 626 627 static void ccid_detach(USBCCIDState *s) 628 { 629 ccid_reset(s); 630 } 631 632 static void ccid_handle_reset(USBDevice *dev) 633 { 634 USBCCIDState *s = USB_CCID_DEV(dev); 635 636 DPRINTF(s, 1, "Reset\n"); 637 638 ccid_reset(s); 639 } 640 641 static const char *ccid_control_to_str(USBCCIDState *s, int request) 642 { 643 switch (request) { 644 /* generic - should be factored out if there are other debugees */ 645 case DeviceOutRequest | USB_REQ_SET_ADDRESS: 646 return "(generic) set address"; 647 case DeviceRequest | USB_REQ_GET_DESCRIPTOR: 648 return "(generic) get descriptor"; 649 case DeviceRequest | USB_REQ_GET_CONFIGURATION: 650 return "(generic) get configuration"; 651 case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: 652 return "(generic) set configuration"; 653 case DeviceRequest | USB_REQ_GET_STATUS: 654 return "(generic) get status"; 655 case DeviceOutRequest | USB_REQ_CLEAR_FEATURE: 656 return "(generic) clear feature"; 657 case DeviceOutRequest | USB_REQ_SET_FEATURE: 658 return "(generic) set_feature"; 659 case InterfaceRequest | USB_REQ_GET_INTERFACE: 660 return "(generic) get interface"; 661 case InterfaceOutRequest | USB_REQ_SET_INTERFACE: 662 return "(generic) set interface"; 663 /* class requests */ 664 case ClassInterfaceOutRequest | CCID_CONTROL_ABORT: 665 return "ABORT"; 666 case ClassInterfaceRequest | CCID_CONTROL_GET_CLOCK_FREQUENCIES: 667 return "GET_CLOCK_FREQUENCIES"; 668 case ClassInterfaceRequest | CCID_CONTROL_GET_DATA_RATES: 669 return "GET_DATA_RATES"; 670 } 671 return "unknown"; 672 } 673 674 static void ccid_handle_control(USBDevice *dev, USBPacket *p, int request, 675 int value, int index, int length, uint8_t *data) 676 { 677 USBCCIDState *s = USB_CCID_DEV(dev); 678 int ret; 679 680 DPRINTF(s, 1, "%s: got control %s (%x), value %x\n", __func__, 681 ccid_control_to_str(s, request), request, value); 682 ret = usb_desc_handle_control(dev, p, request, value, index, length, data); 683 if (ret >= 0) { 684 return; 685 } 686 687 switch (request) { 688 /* Class specific requests. */ 689 case ClassInterfaceOutRequest | CCID_CONTROL_ABORT: 690 DPRINTF(s, 1, "ccid_control abort UNIMPLEMENTED\n"); 691 p->status = USB_RET_STALL; 692 break; 693 case ClassInterfaceRequest | CCID_CONTROL_GET_CLOCK_FREQUENCIES: 694 DPRINTF(s, 1, "ccid_control get clock frequencies UNIMPLEMENTED\n"); 695 p->status = USB_RET_STALL; 696 break; 697 case ClassInterfaceRequest | CCID_CONTROL_GET_DATA_RATES: 698 DPRINTF(s, 1, "ccid_control get data rates UNIMPLEMENTED\n"); 699 p->status = USB_RET_STALL; 700 break; 701 default: 702 DPRINTF(s, 1, "got unsupported/bogus control %x, value %x\n", 703 request, value); 704 p->status = USB_RET_STALL; 705 break; 706 } 707 } 708 709 static bool ccid_card_inserted(USBCCIDState *s) 710 { 711 return s->bmSlotICCState & SLOT_0_STATE_MASK; 712 } 713 714 static uint8_t ccid_card_status(USBCCIDState *s) 715 { 716 return ccid_card_inserted(s) 717 ? (s->powered ? 718 ICC_STATUS_PRESENT_ACTIVE 719 : ICC_STATUS_PRESENT_INACTIVE 720 ) 721 : ICC_STATUS_NOT_PRESENT; 722 } 723 724 static uint8_t ccid_calc_status(USBCCIDState *s) 725 { 726 /* 727 * page 55, 6.2.6, calculation of bStatus from bmICCStatus and 728 * bmCommandStatus 729 */ 730 uint8_t ret = ccid_card_status(s) | (s->bmCommandStatus << 6); 731 DPRINTF(s, D_VERBOSE, "%s: status = %d\n", __func__, ret); 732 return ret; 733 } 734 735 static void ccid_reset_error_status(USBCCIDState *s) 736 { 737 s->bError = ERROR_CMD_NOT_SUPPORTED; 738 s->bmCommandStatus = COMMAND_STATUS_NO_ERROR; 739 } 740 741 static void ccid_write_slot_status(USBCCIDState *s, CCID_Header *recv) 742 { 743 CCID_SlotStatus *h = ccid_reserve_recv_buf(s, sizeof(CCID_SlotStatus)); 744 if (h == NULL) { 745 return; 746 } 747 h->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_SlotStatus; 748 h->b.hdr.dwLength = 0; 749 h->b.hdr.bSlot = recv->bSlot; 750 h->b.hdr.bSeq = recv->bSeq; 751 h->b.bStatus = ccid_calc_status(s); 752 h->b.bError = s->bError; 753 h->bClockStatus = CLOCK_STATUS_RUNNING; 754 ccid_reset_error_status(s); 755 usb_wakeup(s->bulk, 0); 756 } 757 758 static void ccid_write_parameters(USBCCIDState *s, CCID_Header *recv) 759 { 760 CCID_Parameter *h; 761 uint32_t len = s->ulProtocolDataStructureSize; 762 763 h = ccid_reserve_recv_buf(s, sizeof(CCID_Parameter) + len); 764 if (h == NULL) { 765 return; 766 } 767 h->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_Parameters; 768 h->b.hdr.dwLength = 0; 769 h->b.hdr.bSlot = recv->bSlot; 770 h->b.hdr.bSeq = recv->bSeq; 771 h->b.bStatus = ccid_calc_status(s); 772 h->b.bError = s->bError; 773 h->bProtocolNum = s->bProtocolNum; 774 h->abProtocolDataStructure = s->abProtocolDataStructure; 775 ccid_reset_error_status(s); 776 usb_wakeup(s->bulk, 0); 777 } 778 779 static void ccid_write_data_block(USBCCIDState *s, uint8_t slot, uint8_t seq, 780 const uint8_t *data, uint32_t len) 781 { 782 CCID_DataBlock *p = ccid_reserve_recv_buf(s, sizeof(*p) + len); 783 784 if (p == NULL) { 785 return; 786 } 787 p->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_DataBlock; 788 p->b.hdr.dwLength = cpu_to_le32(len); 789 p->b.hdr.bSlot = slot; 790 p->b.hdr.bSeq = seq; 791 p->b.bStatus = ccid_calc_status(s); 792 p->b.bError = s->bError; 793 if (p->b.bError) { 794 DPRINTF(s, D_VERBOSE, "error %d\n", p->b.bError); 795 } 796 if (len) { 797 assert(data); 798 memcpy(p->abData, data, len); 799 } 800 ccid_reset_error_status(s); 801 usb_wakeup(s->bulk, 0); 802 } 803 804 static void ccid_report_error_failed(USBCCIDState *s, uint8_t error) 805 { 806 s->bmCommandStatus = COMMAND_STATUS_FAILED; 807 s->bError = error; 808 } 809 810 static void ccid_write_data_block_answer(USBCCIDState *s, 811 const uint8_t *data, uint32_t len) 812 { 813 uint8_t seq; 814 uint8_t slot; 815 816 if (!ccid_has_pending_answers(s)) { 817 DPRINTF(s, D_WARN, "error: no pending answer to return to guest\n"); 818 ccid_report_error_failed(s, ERROR_ICC_MUTE); 819 return; 820 } 821 ccid_remove_pending_answer(s, &slot, &seq); 822 ccid_write_data_block(s, slot, seq, data, len); 823 } 824 825 static uint8_t atr_get_protocol_num(const uint8_t *atr, uint32_t len) 826 { 827 int i; 828 829 if (len < 2 || !(atr[1] & 0x80)) { 830 /* too short or TD1 not included */ 831 return 0; /* T=0, default */ 832 } 833 i = 1 + !!(atr[1] & 0x10) + !!(atr[1] & 0x20) + !!(atr[1] & 0x40); 834 i += !!(atr[1] & 0x80); 835 return atr[i] & 0x0f; 836 } 837 838 static void ccid_write_data_block_atr(USBCCIDState *s, CCID_Header *recv) 839 { 840 const uint8_t *atr = NULL; 841 uint32_t len = 0; 842 uint8_t atr_protocol_num; 843 CCID_T0ProtocolDataStructure *t0 = &s->abProtocolDataStructure.t0; 844 CCID_T1ProtocolDataStructure *t1 = &s->abProtocolDataStructure.t1; 845 846 if (s->card) { 847 atr = ccid_card_get_atr(s->card, &len); 848 } 849 atr_protocol_num = atr_get_protocol_num(atr, len); 850 DPRINTF(s, D_VERBOSE, "%s: atr contains protocol=%d\n", __func__, 851 atr_protocol_num); 852 /* set parameters from ATR - see spec page 109 */ 853 s->bProtocolNum = (atr_protocol_num <= 1 ? atr_protocol_num 854 : s->bProtocolNum); 855 switch (atr_protocol_num) { 856 case 0: 857 /* TODO: unimplemented ATR T0 parameters */ 858 t0->bmFindexDindex = 0; 859 t0->bmTCCKST0 = 0; 860 t0->bGuardTimeT0 = 0; 861 t0->bWaitingIntegerT0 = 0; 862 t0->bClockStop = 0; 863 break; 864 case 1: 865 /* TODO: unimplemented ATR T1 parameters */ 866 t1->bmFindexDindex = 0; 867 t1->bmTCCKST1 = 0; 868 t1->bGuardTimeT1 = 0; 869 t1->bWaitingIntegerT1 = 0; 870 t1->bClockStop = 0; 871 t1->bIFSC = 0; 872 t1->bNadValue = 0; 873 break; 874 default: 875 DPRINTF(s, D_WARN, "%s: error: unsupported ATR protocol %d\n", 876 __func__, atr_protocol_num); 877 } 878 ccid_write_data_block(s, recv->bSlot, recv->bSeq, atr, len); 879 } 880 881 static void ccid_set_parameters(USBCCIDState *s, CCID_Header *recv) 882 { 883 CCID_SetParameters *ph = (CCID_SetParameters *) recv; 884 uint32_t protocol_num = ph->bProtocolNum & 3; 885 886 if (protocol_num != 0 && protocol_num != 1) { 887 ccid_report_error_failed(s, ERROR_CMD_NOT_SUPPORTED); 888 return; 889 } 890 s->bProtocolNum = protocol_num; 891 s->abProtocolDataStructure = ph->abProtocolDataStructure; 892 } 893 894 /* 895 * must be 5 bytes for T=0, 7 bytes for T=1 896 * See page 52 897 */ 898 static const CCID_ProtocolDataStructure defaultProtocolDataStructure = { 899 .t1 = { 900 .bmFindexDindex = 0x77, 901 .bmTCCKST1 = 0x00, 902 .bGuardTimeT1 = 0x00, 903 .bWaitingIntegerT1 = 0x00, 904 .bClockStop = 0x00, 905 .bIFSC = 0xfe, 906 .bNadValue = 0x00, 907 } 908 }; 909 910 static void ccid_reset_parameters(USBCCIDState *s) 911 { 912 s->bProtocolNum = 0; /* T=0 */ 913 s->abProtocolDataStructure = defaultProtocolDataStructure; 914 } 915 916 /* NOTE: only a single slot is supported (SLOT_0) */ 917 static void ccid_on_slot_change(USBCCIDState *s, bool full) 918 { 919 /* RDR_to_PC_NotifySlotChange, 6.3.1 page 56 */ 920 uint8_t current = s->bmSlotICCState; 921 if (full) { 922 s->bmSlotICCState |= SLOT_0_STATE_MASK; 923 } else { 924 s->bmSlotICCState &= ~SLOT_0_STATE_MASK; 925 } 926 if (current != s->bmSlotICCState) { 927 s->bmSlotICCState |= SLOT_0_CHANGED_MASK; 928 } 929 s->notify_slot_change = true; 930 usb_wakeup(s->intr, 0); 931 } 932 933 static void ccid_write_data_block_error( 934 USBCCIDState *s, uint8_t slot, uint8_t seq) 935 { 936 ccid_write_data_block(s, slot, seq, NULL, 0); 937 } 938 939 static void ccid_on_apdu_from_guest(USBCCIDState *s, CCID_XferBlock *recv) 940 { 941 uint32_t len; 942 943 if (ccid_card_status(s) != ICC_STATUS_PRESENT_ACTIVE) { 944 DPRINTF(s, 1, 945 "usb-ccid: not sending apdu to client, no card connected\n"); 946 ccid_write_data_block_error(s, recv->hdr.bSlot, recv->hdr.bSeq); 947 return; 948 } 949 len = le32_to_cpu(recv->hdr.dwLength); 950 DPRINTF(s, 1, "%s: seq %d, len %u\n", __func__, 951 recv->hdr.bSeq, len); 952 ccid_add_pending_answer(s, (CCID_Header *)recv); 953 if (s->card && len <= BULK_OUT_DATA_SIZE) { 954 ccid_card_apdu_from_guest(s->card, recv->abData, len); 955 } else { 956 DPRINTF(s, D_WARN, "warning: discarded apdu\n"); 957 } 958 } 959 960 static const char *ccid_message_type_to_str(uint8_t type) 961 { 962 switch (type) { 963 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn: return "IccPowerOn"; 964 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff: return "IccPowerOff"; 965 case CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus: return "GetSlotStatus"; 966 case CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock: return "XfrBlock"; 967 case CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters: return "GetParameters"; 968 case CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters: return "ResetParameters"; 969 case CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters: return "SetParameters"; 970 case CCID_MESSAGE_TYPE_PC_to_RDR_Escape: return "Escape"; 971 case CCID_MESSAGE_TYPE_PC_to_RDR_IccClock: return "IccClock"; 972 case CCID_MESSAGE_TYPE_PC_to_RDR_T0APDU: return "T0APDU"; 973 case CCID_MESSAGE_TYPE_PC_to_RDR_Secure: return "Secure"; 974 case CCID_MESSAGE_TYPE_PC_to_RDR_Mechanical: return "Mechanical"; 975 case CCID_MESSAGE_TYPE_PC_to_RDR_Abort: return "Abort"; 976 case CCID_MESSAGE_TYPE_PC_to_RDR_SetDataRateAndClockFrequency: 977 return "SetDataRateAndClockFrequency"; 978 } 979 return "unknown"; 980 } 981 982 static void ccid_handle_bulk_out(USBCCIDState *s, USBPacket *p) 983 { 984 CCID_Header *ccid_header; 985 986 if (p->iov.size + s->bulk_out_pos > BULK_OUT_DATA_SIZE) { 987 goto err; 988 } 989 usb_packet_copy(p, s->bulk_out_data + s->bulk_out_pos, p->iov.size); 990 s->bulk_out_pos += p->iov.size; 991 if (s->bulk_out_pos < 10) { 992 DPRINTF(s, 1, "%s: header incomplete\n", __func__); 993 goto err; 994 } 995 996 ccid_header = (CCID_Header *)s->bulk_out_data; 997 if ((s->bulk_out_pos - 10 < ccid_header->dwLength) && 998 (p->iov.size == CCID_MAX_PACKET_SIZE)) { 999 DPRINTF(s, D_VERBOSE, 1000 "usb-ccid: bulk_in: expecting more packets (%u/%u)\n", 1001 s->bulk_out_pos - 10, ccid_header->dwLength); 1002 return; 1003 } 1004 if (s->bulk_out_pos - 10 != ccid_header->dwLength) { 1005 DPRINTF(s, 1, 1006 "usb-ccid: bulk_in: message size mismatch (got %u, expected %u)\n", 1007 s->bulk_out_pos - 10, ccid_header->dwLength); 1008 goto err; 1009 } 1010 1011 DPRINTF(s, D_MORE_INFO, "%s %x %s\n", __func__, 1012 ccid_header->bMessageType, 1013 ccid_message_type_to_str(ccid_header->bMessageType)); 1014 switch (ccid_header->bMessageType) { 1015 case CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus: 1016 ccid_write_slot_status(s, ccid_header); 1017 break; 1018 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn: 1019 DPRINTF(s, 1, "%s: PowerOn: %d\n", __func__, 1020 ((CCID_IccPowerOn *)(ccid_header))->bPowerSelect); 1021 s->powered = true; 1022 if (!ccid_card_inserted(s)) { 1023 ccid_report_error_failed(s, ERROR_ICC_MUTE); 1024 } 1025 /* atr is written regardless of error. */ 1026 ccid_write_data_block_atr(s, ccid_header); 1027 break; 1028 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff: 1029 ccid_reset_error_status(s); 1030 s->powered = false; 1031 ccid_write_slot_status(s, ccid_header); 1032 break; 1033 case CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock: 1034 ccid_on_apdu_from_guest(s, (CCID_XferBlock *)s->bulk_out_data); 1035 break; 1036 case CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters: 1037 ccid_reset_error_status(s); 1038 ccid_set_parameters(s, ccid_header); 1039 ccid_write_parameters(s, ccid_header); 1040 break; 1041 case CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters: 1042 ccid_reset_error_status(s); 1043 ccid_reset_parameters(s); 1044 ccid_write_parameters(s, ccid_header); 1045 break; 1046 case CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters: 1047 ccid_reset_error_status(s); 1048 ccid_write_parameters(s, ccid_header); 1049 break; 1050 case CCID_MESSAGE_TYPE_PC_to_RDR_Mechanical: 1051 ccid_report_error_failed(s, 0); 1052 ccid_write_slot_status(s, ccid_header); 1053 break; 1054 default: 1055 DPRINTF(s, 1, 1056 "handle_data: ERROR: unhandled message type %Xh\n", 1057 ccid_header->bMessageType); 1058 /* 1059 * The caller is expecting the device to respond, tell it we 1060 * don't support the operation. 1061 */ 1062 ccid_report_error_failed(s, ERROR_CMD_NOT_SUPPORTED); 1063 ccid_write_slot_status(s, ccid_header); 1064 break; 1065 } 1066 s->bulk_out_pos = 0; 1067 return; 1068 1069 err: 1070 p->status = USB_RET_STALL; 1071 s->bulk_out_pos = 0; 1072 return; 1073 } 1074 1075 static void ccid_bulk_in_copy_to_guest(USBCCIDState *s, USBPacket *p, 1076 unsigned int max_packet_size) 1077 { 1078 int len = 0; 1079 1080 ccid_bulk_in_get(s); 1081 if (s->current_bulk_in != NULL) { 1082 len = MIN(s->current_bulk_in->len - s->current_bulk_in->pos, 1083 p->iov.size); 1084 if (len) { 1085 usb_packet_copy(p, s->current_bulk_in->data + 1086 s->current_bulk_in->pos, len); 1087 } 1088 s->current_bulk_in->pos += len; 1089 if (s->current_bulk_in->pos == s->current_bulk_in->len 1090 && len != max_packet_size) { 1091 ccid_bulk_in_release(s); 1092 } 1093 } else { 1094 /* return when device has no data - usb 2.0 spec Table 8-4 */ 1095 p->status = USB_RET_NAK; 1096 } 1097 if (len) { 1098 DPRINTF(s, D_MORE_INFO, 1099 "%s: %zd/%d req/act to guest (BULK_IN)\n", 1100 __func__, p->iov.size, len); 1101 } 1102 if (len < p->iov.size) { 1103 DPRINTF(s, 1, 1104 "%s: returning short (EREMOTEIO) %d < %zd\n", 1105 __func__, len, p->iov.size); 1106 } 1107 } 1108 1109 static void ccid_handle_data(USBDevice *dev, USBPacket *p) 1110 { 1111 USBCCIDState *s = USB_CCID_DEV(dev); 1112 uint8_t buf[2]; 1113 1114 switch (p->pid) { 1115 case USB_TOKEN_OUT: 1116 ccid_handle_bulk_out(s, p); 1117 break; 1118 1119 case USB_TOKEN_IN: 1120 switch (p->ep->nr) { 1121 case CCID_BULK_IN_EP: 1122 ccid_bulk_in_copy_to_guest(s, p, dev->ep_ctl.max_packet_size); 1123 break; 1124 case CCID_INT_IN_EP: 1125 if (s->notify_slot_change) { 1126 /* page 56, RDR_to_PC_NotifySlotChange */ 1127 buf[0] = CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange; 1128 buf[1] = s->bmSlotICCState; 1129 usb_packet_copy(p, buf, 2); 1130 s->notify_slot_change = false; 1131 s->bmSlotICCState &= ~SLOT_0_CHANGED_MASK; 1132 DPRINTF(s, D_INFO, 1133 "handle_data: int_in: notify_slot_change %X, " 1134 "requested len %zd\n", 1135 s->bmSlotICCState, p->iov.size); 1136 } else { 1137 p->status = USB_RET_NAK; 1138 } 1139 break; 1140 default: 1141 DPRINTF(s, 1, "Bad endpoint\n"); 1142 p->status = USB_RET_STALL; 1143 break; 1144 } 1145 break; 1146 default: 1147 DPRINTF(s, 1, "Bad token\n"); 1148 p->status = USB_RET_STALL; 1149 break; 1150 } 1151 } 1152 1153 static void ccid_unrealize(USBDevice *dev) 1154 { 1155 USBCCIDState *s = USB_CCID_DEV(dev); 1156 1157 ccid_bulk_in_clear(s); 1158 } 1159 1160 static void ccid_flush_pending_answers(USBCCIDState *s) 1161 { 1162 while (ccid_has_pending_answers(s)) { 1163 ccid_write_data_block_answer(s, NULL, 0); 1164 } 1165 } 1166 1167 static Answer *ccid_peek_next_answer(USBCCIDState *s) 1168 { 1169 return s->pending_answers_num == 0 1170 ? NULL 1171 : &s->pending_answers[s->pending_answers_start % PENDING_ANSWERS_NUM]; 1172 } 1173 1174 static Property ccid_props[] = { 1175 DEFINE_PROP_UINT32("slot", struct CCIDCardState, slot, 0), 1176 DEFINE_PROP_END_OF_LIST(), 1177 }; 1178 1179 static const TypeInfo ccid_bus_info = { 1180 .name = TYPE_CCID_BUS, 1181 .parent = TYPE_BUS, 1182 .instance_size = sizeof(CCIDBus), 1183 }; 1184 1185 void ccid_card_send_apdu_to_guest(CCIDCardState *card, 1186 uint8_t *apdu, uint32_t len) 1187 { 1188 DeviceState *qdev = DEVICE(card); 1189 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1190 USBCCIDState *s = USB_CCID_DEV(dev); 1191 Answer *answer; 1192 1193 if (!ccid_has_pending_answers(s)) { 1194 DPRINTF(s, 1, "CCID ERROR: got an APDU without pending answers\n"); 1195 return; 1196 } 1197 s->bmCommandStatus = COMMAND_STATUS_NO_ERROR; 1198 answer = ccid_peek_next_answer(s); 1199 if (answer == NULL) { 1200 DPRINTF(s, D_WARN, "%s: error: unexpected lack of answer\n", __func__); 1201 ccid_report_error_failed(s, ERROR_HW_ERROR); 1202 return; 1203 } 1204 DPRINTF(s, 1, "APDU returned to guest %u (answer seq %d, slot %d)\n", 1205 len, answer->seq, answer->slot); 1206 ccid_write_data_block_answer(s, apdu, len); 1207 } 1208 1209 void ccid_card_card_removed(CCIDCardState *card) 1210 { 1211 DeviceState *qdev = DEVICE(card); 1212 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1213 USBCCIDState *s = USB_CCID_DEV(dev); 1214 1215 ccid_on_slot_change(s, false); 1216 ccid_flush_pending_answers(s); 1217 ccid_reset(s); 1218 } 1219 1220 int ccid_card_ccid_attach(CCIDCardState *card) 1221 { 1222 DeviceState *qdev = DEVICE(card); 1223 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1224 USBCCIDState *s = USB_CCID_DEV(dev); 1225 1226 DPRINTF(s, 1, "CCID Attach\n"); 1227 return 0; 1228 } 1229 1230 void ccid_card_ccid_detach(CCIDCardState *card) 1231 { 1232 DeviceState *qdev = DEVICE(card); 1233 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1234 USBCCIDState *s = USB_CCID_DEV(dev); 1235 1236 DPRINTF(s, 1, "CCID Detach\n"); 1237 if (ccid_card_inserted(s)) { 1238 ccid_on_slot_change(s, false); 1239 } 1240 ccid_detach(s); 1241 } 1242 1243 void ccid_card_card_error(CCIDCardState *card, uint64_t error) 1244 { 1245 DeviceState *qdev = DEVICE(card); 1246 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1247 USBCCIDState *s = USB_CCID_DEV(dev); 1248 1249 s->bmCommandStatus = COMMAND_STATUS_FAILED; 1250 s->last_answer_error = error; 1251 DPRINTF(s, 1, "VSC_Error: %" PRIX64 "\n", s->last_answer_error); 1252 /* TODO: these errors should be more verbose and propagated to the guest.*/ 1253 /* 1254 * We flush all pending answers on CardRemove message in ccid-card-passthru, 1255 * so check that first to not trigger abort 1256 */ 1257 if (ccid_has_pending_answers(s)) { 1258 ccid_write_data_block_answer(s, NULL, 0); 1259 } 1260 } 1261 1262 void ccid_card_card_inserted(CCIDCardState *card) 1263 { 1264 DeviceState *qdev = DEVICE(card); 1265 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1266 USBCCIDState *s = USB_CCID_DEV(dev); 1267 1268 s->bmCommandStatus = COMMAND_STATUS_NO_ERROR; 1269 ccid_flush_pending_answers(s); 1270 ccid_on_slot_change(s, true); 1271 } 1272 1273 static void ccid_card_unrealize(DeviceState *qdev) 1274 { 1275 CCIDCardState *card = CCID_CARD(qdev); 1276 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 1277 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1278 USBCCIDState *s = USB_CCID_DEV(dev); 1279 1280 if (ccid_card_inserted(s)) { 1281 ccid_card_card_removed(card); 1282 } 1283 if (cc->unrealize) { 1284 cc->unrealize(card); 1285 } 1286 s->card = NULL; 1287 } 1288 1289 static void ccid_card_realize(DeviceState *qdev, Error **errp) 1290 { 1291 CCIDCardState *card = CCID_CARD(qdev); 1292 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 1293 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1294 USBCCIDState *s = USB_CCID_DEV(dev); 1295 Error *local_err = NULL; 1296 1297 if (card->slot != 0) { 1298 error_setg(errp, "usb-ccid supports one slot, can't add %d", 1299 card->slot); 1300 return; 1301 } 1302 if (s->card != NULL) { 1303 error_setg(errp, "usb-ccid card already full, not adding"); 1304 return; 1305 } 1306 if (cc->realize) { 1307 cc->realize(card, &local_err); 1308 if (local_err != NULL) { 1309 error_propagate(errp, local_err); 1310 return; 1311 } 1312 } 1313 s->card = card; 1314 } 1315 1316 static void ccid_realize(USBDevice *dev, Error **errp) 1317 { 1318 USBCCIDState *s = USB_CCID_DEV(dev); 1319 1320 usb_desc_create_serial(dev); 1321 usb_desc_init(dev); 1322 qbus_init(&s->bus, sizeof(s->bus), TYPE_CCID_BUS, DEVICE(dev), NULL); 1323 qbus_set_hotplug_handler(BUS(&s->bus), OBJECT(dev)); 1324 s->intr = usb_ep_get(dev, USB_TOKEN_IN, CCID_INT_IN_EP); 1325 s->bulk = usb_ep_get(dev, USB_TOKEN_IN, CCID_BULK_IN_EP); 1326 s->card = NULL; 1327 s->dev.speed = USB_SPEED_FULL; 1328 s->dev.speedmask = USB_SPEED_MASK_FULL; 1329 s->notify_slot_change = false; 1330 s->powered = true; 1331 s->pending_answers_num = 0; 1332 s->last_answer_error = 0; 1333 s->bulk_in_pending_start = 0; 1334 s->bulk_in_pending_end = 0; 1335 s->current_bulk_in = NULL; 1336 ccid_reset_error_status(s); 1337 s->bulk_out_pos = 0; 1338 ccid_reset_parameters(s); 1339 ccid_reset(s); 1340 s->debug = parse_debug_env("QEMU_CCID_DEBUG", D_VERBOSE, s->debug); 1341 } 1342 1343 static int ccid_post_load(void *opaque, int version_id) 1344 { 1345 USBCCIDState *s = opaque; 1346 1347 /* 1348 * This must be done after usb_device_attach, which sets state to ATTACHED, 1349 * while it must be DEFAULT in order to accept packets (like it is after 1350 * reset, but reset will reset our addr and call our reset handler which 1351 * may change state, and we don't want to do that when migrating). 1352 */ 1353 s->dev.state = s->state_vmstate; 1354 return 0; 1355 } 1356 1357 static int ccid_pre_save(void *opaque) 1358 { 1359 USBCCIDState *s = opaque; 1360 1361 s->state_vmstate = s->dev.state; 1362 1363 return 0; 1364 } 1365 1366 static const VMStateDescription bulk_in_vmstate = { 1367 .name = "CCID BulkIn state", 1368 .version_id = 1, 1369 .minimum_version_id = 1, 1370 .fields = (VMStateField[]) { 1371 VMSTATE_BUFFER(data, BulkIn), 1372 VMSTATE_UINT32(len, BulkIn), 1373 VMSTATE_UINT32(pos, BulkIn), 1374 VMSTATE_END_OF_LIST() 1375 } 1376 }; 1377 1378 static const VMStateDescription answer_vmstate = { 1379 .name = "CCID Answer state", 1380 .version_id = 1, 1381 .minimum_version_id = 1, 1382 .fields = (VMStateField[]) { 1383 VMSTATE_UINT8(slot, Answer), 1384 VMSTATE_UINT8(seq, Answer), 1385 VMSTATE_END_OF_LIST() 1386 } 1387 }; 1388 1389 static const VMStateDescription usb_device_vmstate = { 1390 .name = "usb_device", 1391 .version_id = 1, 1392 .minimum_version_id = 1, 1393 .fields = (VMStateField[]) { 1394 VMSTATE_UINT8(addr, USBDevice), 1395 VMSTATE_BUFFER(setup_buf, USBDevice), 1396 VMSTATE_BUFFER(data_buf, USBDevice), 1397 VMSTATE_END_OF_LIST() 1398 } 1399 }; 1400 1401 static const VMStateDescription ccid_vmstate = { 1402 .name = "usb-ccid", 1403 .version_id = 1, 1404 .minimum_version_id = 1, 1405 .post_load = ccid_post_load, 1406 .pre_save = ccid_pre_save, 1407 .fields = (VMStateField[]) { 1408 VMSTATE_STRUCT(dev, USBCCIDState, 1, usb_device_vmstate, USBDevice), 1409 VMSTATE_UINT8(debug, USBCCIDState), 1410 VMSTATE_BUFFER(bulk_out_data, USBCCIDState), 1411 VMSTATE_UINT32(bulk_out_pos, USBCCIDState), 1412 VMSTATE_UINT8(bmSlotICCState, USBCCIDState), 1413 VMSTATE_UINT8(powered, USBCCIDState), 1414 VMSTATE_UINT8(notify_slot_change, USBCCIDState), 1415 VMSTATE_UINT64(last_answer_error, USBCCIDState), 1416 VMSTATE_UINT8(bError, USBCCIDState), 1417 VMSTATE_UINT8(bmCommandStatus, USBCCIDState), 1418 VMSTATE_UINT8(bProtocolNum, USBCCIDState), 1419 VMSTATE_BUFFER(abProtocolDataStructure.data, USBCCIDState), 1420 VMSTATE_UINT32(ulProtocolDataStructureSize, USBCCIDState), 1421 VMSTATE_STRUCT_ARRAY(bulk_in_pending, USBCCIDState, 1422 BULK_IN_PENDING_NUM, 1, bulk_in_vmstate, BulkIn), 1423 VMSTATE_UINT32(bulk_in_pending_start, USBCCIDState), 1424 VMSTATE_UINT32(bulk_in_pending_end, USBCCIDState), 1425 VMSTATE_STRUCT_ARRAY(pending_answers, USBCCIDState, 1426 PENDING_ANSWERS_NUM, 1, answer_vmstate, Answer), 1427 VMSTATE_UINT32(pending_answers_num, USBCCIDState), 1428 VMSTATE_UNUSED(1), /* was migration_state */ 1429 VMSTATE_UINT32(state_vmstate, USBCCIDState), 1430 VMSTATE_END_OF_LIST() 1431 } 1432 }; 1433 1434 static Property ccid_properties[] = { 1435 DEFINE_PROP_UINT8("debug", USBCCIDState, debug, 0), 1436 DEFINE_PROP_END_OF_LIST(), 1437 }; 1438 1439 static void ccid_class_initfn(ObjectClass *klass, void *data) 1440 { 1441 DeviceClass *dc = DEVICE_CLASS(klass); 1442 USBDeviceClass *uc = USB_DEVICE_CLASS(klass); 1443 HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(klass); 1444 1445 uc->realize = ccid_realize; 1446 uc->product_desc = "QEMU USB CCID"; 1447 uc->usb_desc = &desc_ccid; 1448 uc->handle_reset = ccid_handle_reset; 1449 uc->handle_control = ccid_handle_control; 1450 uc->handle_data = ccid_handle_data; 1451 uc->unrealize = ccid_unrealize; 1452 dc->desc = "CCID Rev 1.1 smartcard reader"; 1453 dc->vmsd = &ccid_vmstate; 1454 device_class_set_props(dc, ccid_properties); 1455 set_bit(DEVICE_CATEGORY_INPUT, dc->categories); 1456 hc->unplug = qdev_simple_device_unplug_cb; 1457 } 1458 1459 static const TypeInfo ccid_info = { 1460 .name = TYPE_USB_CCID_DEV, 1461 .parent = TYPE_USB_DEVICE, 1462 .instance_size = sizeof(USBCCIDState), 1463 .class_init = ccid_class_initfn, 1464 .interfaces = (InterfaceInfo[]) { 1465 { TYPE_HOTPLUG_HANDLER }, 1466 { } 1467 } 1468 }; 1469 1470 static void ccid_card_class_init(ObjectClass *klass, void *data) 1471 { 1472 DeviceClass *k = DEVICE_CLASS(klass); 1473 k->bus_type = TYPE_CCID_BUS; 1474 k->realize = ccid_card_realize; 1475 k->unrealize = ccid_card_unrealize; 1476 device_class_set_props(k, ccid_props); 1477 } 1478 1479 static const TypeInfo ccid_card_type_info = { 1480 .name = TYPE_CCID_CARD, 1481 .parent = TYPE_DEVICE, 1482 .instance_size = sizeof(CCIDCardState), 1483 .abstract = true, 1484 .class_size = sizeof(CCIDCardClass), 1485 .class_init = ccid_card_class_init, 1486 }; 1487 1488 static void ccid_register_types(void) 1489 { 1490 type_register_static(&ccid_bus_info); 1491 type_register_static(&ccid_card_type_info); 1492 type_register_static(&ccid_info); 1493 } 1494 1495 type_init(ccid_register_types) 1496